hi guys my tg01 keeps changing from horizontal to vertical which some times gets right on my txxs so can some kind person tell me if its possable to stop this
many thanks all
start menu > settings > system > motion sensor > uncheck all boxes
changing screen
cheers pal
souljaboy said:
start menu > settings > system > motion sensor > uncheck all boxes
Click to expand...
Click to collapse
Blacklist
souljaboy said:
start menu > settings > system > motion sensor > uncheck all boxes
Click to expand...
Click to collapse
Does the TG01 have a ‘blacklist’ entry in the registry to stop auto-rotation on specified apps?
Kindest regards,
fitzy-boy
souljaboy said:
start menu > settings > system > motion sensor > uncheck all boxes
Click to expand...
Click to collapse
If that doesn't work, as mine sometimes rotates it even though it's not checked, check it, click ok, then uncheck and ok again
fitzy-boy said:
Does the TG01 have a ‘blacklist’ entry in the registry to stop auto-rotation on specified apps?
Kindest regards,
fitzy-boy
Click to expand...
Click to collapse
not any that i know of ...
if u really wanna conrol rotation get ae buttob plus and bind a volume key to "rotate screen"
(or the silver slider with the "add button" function)
Ok I am new to ubuntu touch.
I have installed the latest saucy-preinstalled-touch-armhf.zip on my nexus 4 but i am sort confused with all the gestures ...
for example if i enter the settings control panel how do you apply a settings?
am i correct in assuming i swipe UP from the bottom and choose back? but that doesnt apply my setting.
next one is how do i go back? again in the settings panel. lets say i open the wifi screen. how do i go back to previous screen?
should this not be easy to figure out?
cylent said:
for example if i enter the settings control panel how do you apply a settings?
Click to expand...
Click to collapse
You choose the setting and it'll be applied.
am i correct in assuming i swipe UP from the bottom and choose back?
Click to expand...
Click to collapse
100% correct.
but that doesnt apply my setting.
Click to expand...
Click to collapse
Ubuntu Touch is not ready yet so you have to set most of the things with the Terminal app. The setting will be fully functional in a couple of weeks I assume.
next one is how do i go back? again in the settings panel. lets say i open the wifi screen. how do i go back to previous screen?
Click to expand...
Click to collapse
Swipe up (to open the menu) and choose back.
should this not be easy to figure out?
Click to expand...
Click to collapse
It's easy you've figured it out already.
I hope you'll enjoy using Ubuntu Touch anyway. You could look at the first installable applications for example and install the xda app or something else. Or you could change some things with the Terminal (look at all those tutorials at the Ubuntu Touch subforum here at xda). Or you could do even more, e.g setting up BitTorrent Sync...
Or you start writing you first app for Ubuntu Touch .
Some settings just don't work, but validation is done by back (or a button that validate, if there is)
How do i get this?
Do i need to edit the settings.apk for this?
skyfast said:
How do i get this?
Do i need to edit the settings.apk for this?
Click to expand...
Click to collapse
Goto Settings -> About phone
And keep tapping the "Build number" and it'll show a message as "You are 4 steps away from enabling developer options"
Continue tapping and you'll enable "developer options", this should also enable "Performance" under the settings
what rom are you using if its kitkat use abhiban89 method if its jellybean then go to settings/and scroll you should see developer options enable it and you will see many performance options i recommend if your phone lag check DONT Keep activities and set background limit to 1 pressing thanks is always good good bye
abhibhan89 said:
Goto Settings -> About phone
And keep tapping the "Build number" and it'll show a message as "You are 4 steps away from enabling developer options"
Continue tapping and you'll enable "developer options", this should also enable "Performance" under the settings
Click to expand...
Click to collapse
does this work on stock roms? so i dont need some tweaking?
MaDTH Bistata said:
what rom are you using if its kitkat use abhiban89 method if its jellybean then go to settings/and scroll you should see developer options enable it and you will see many performance options i recommend if your phone lag check DONT Keep activities and set background limit to 1 pressing thanks is always good good bye
Click to expand...
Click to collapse
its ICS based rom, btw i know that tweak already.
skyfast said:
does this work on stock roms? so i dont need some tweaking?
Click to expand...
Click to collapse
Not sure, about the "performance" control being enabled, but it sure enables "developer options" on stock ROM's
Give it a try.
hmmm ok you can install these apps greenify and cleanmaster and smart ram booser and it will be ok
press thanks if i helped you
abhibhan89 said:
Not sure, about the "performance" control being enabled, but it sure enables "developer options" on stock ROM's
Give it a try.
Click to expand...
Click to collapse
lol now i know what do you mean . its not "performance" control but it is "performance control".
I am interested in this and it is very important that someone explain to me and say whether it can be done and if it can, how?
I play BOWLING KING and I read that TASKER can only do many operations, wondering if it can do it. one game takes about 180 seconds, then ends, and after that SEARCH PLAYER is opened, what interests me is whether it is possible with the touch program to get someone to start looking for a player after the 180s, and not that I have to do it . If possible, how to do it? Is it possible to do this or to connect a botmaker with a task? Thanks.
dejanxxxx said:
I am interested in this and it is very important...........
Click to expand...
Click to collapse
I don't use Tasker myself but, I believe that one or more of the following threads should be helpful for what you are looking for. Don't be afraid to ask for some member guidance within one of them too.
https://forum.xda-developers.com/showthread.php?t=1110775
https://forum.xda-developers.com/showthread.php?t=2489449
https://forum.xda-developers.com/showthread.php?t=3742629
Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my Tandy TRS-80.
dejanxxxx said:
I am interested in this and it is very important that someone explain to me and say whether it can be done and if it can, how?
I play BOWLING KING and I read that TASKER can only do many operations, wondering if it can do it. one game takes about 180 seconds, then ends, and after that SEARCH PLAYER is opened, what interests me is whether it is possible with the touch program to get someone to start looking for a player after the 180s, and not that I have to do it . If possible, how to do it? Is it possible to do this or to connect a botmaker with a task? Thanks.
Click to expand...
Click to collapse
You can do this by using the Auto input tasker plugin
Create a task like
-if app launched
-wait .... Seconds
-Click on the search player area (using auto input plugin)
-again wait ... Seconds
-click on search player
Repeat the above loop
Hope my information was helpful
Regards,
milkyway3
milkyway3 said:
You can do this by using the Auto input tasker plugin
Create a task like
-if app launched
-wait .... Seconds
-Click on the search player area (using auto input plugin)
-again wait ... Seconds
-click on search player
Repeat the above loop
Hope my information was helpful
Regards,
milkyway3
Click to expand...
Click to collapse
Thanks.
But how do this (-Click on the search player area (using auto input plugin) really don't know. If you can and have time can you explain me and shows how do this. Thanks.
dejanxxxx said:
Thanks.
But how do this (-Click on the search player area (using auto input plugin) really don't know. If you can and have time can you explain me and shows how do this. Thanks.
Click to expand...
Click to collapse
Open tasker
Click on + icon to create a profile
Select your application
Add new task
Add action
Select wait 10 seconds (just for app to get properly launched)
Add action
Select plugin- auto input
Click on action
Select edit configuration
Select touch in action tab
Click on easy setup
A notification will appear
Open your game and play it once
Once played the search player option will appear
Select add option in notification
Click on search player
Click on OK in notification
You will automatically be taken back to tasker
Add action
Select wait 185 seconds (you can also set it 180 add just added 5 seconds for any kind of waiting time may be due to loading etc.)
Add action
Select task- goto
Repeat the loop (after the action of wait 10 sec i.e.from the Auto input action)
Done
Hope you also add a thanks to my post if it was helpful
Regards,
milkyway3
milkyway3 said:
Open tasker
Click on + icon to create a profile
Select your application
Add new task
Add action
Select wait 10 seconds (just for app to get properly launched)
Add action
Select plugin- auto input
Click on action
Select edit configuration
Select touch in action tab
Click on easy setup
A notification will appear
Open your game and play it once
Once played the search player option will appear
Select add option in notification
Click on search player
Click on OK in notification
You will automatically be taken back to tasker
Add action
Select wait 185 seconds (you can also set it 180 add just added 5 seconds for any kind of waiting time may be due to loading etc.)
Add action
Select task- goto
Repeat the loop (after the action of wait 10 sec i.e.from the Auto input action)
Done
Hope you also add a thanks to my post if it was helpful
Regards,
milkyway3
Click to expand...
Click to collapse
Thanks for your reply. Here:
Here's a video, see if I've done everything well, and come here (
Click on search player
Click on OK in notification)
When should I click on (OK in notification) will not react when I click (and I do not know if I did everything well?) Watch the video and tell me if I have done well and what else should I do? Thanks a lot.
dejanxxxx said:
Thanks for your reply. Here:
Here's a video, see if I've done everything well, and come here (
Click on search player
Click on OK in notification)
When should I click on (OK in notification) will not react when I click (and I do not know if I did everything well?) Watch the video and tell me if I have done well and what else should I do? Thanks a lot.
Click to expand...
Click to collapse
You missed to select touch in action tab at
1 min 24 sec (1:24) in the video
First click on action below easy setup
Then select 'click'
Then proceed further by referring to my previous post
Regards,
milkyway3
milkyway3 said:
Open tasker
Click on + icon to create a profile
Select your application
Add new task
Add action
Select wait 10 seconds (just for app to get properly launched)
Add action
Select plugin- auto input
Click on action
Select edit configuration
Select touch in action tab
Click on easy setup
A notification will appear
Open your game and play it once
Once played the search player option will appear
Select add option in notification
Click on search player
Click on OK in notification
You will automatically be taken back to tasker
Add action
Select wait 185 seconds (you can also set it 180 add just added 5 seconds for any kind of waiting time may be due to loading etc.)
Add action
Select task- goto
Repeat the loop (after the action of wait 10 sec i.e.from the Auto input action)
Done
Hope you also add a thanks to my post if it was helpful
Regards,
milkyway3
Click to expand...
Click to collapse
milkyway3 said:
You missed to select touch in action tab at
1 min 24 sec (1:24) in the video
First click on action below easy setup
Then select 'click'
Then proceed further by referring to my previous post
Regards,
milkyway3
Click to expand...
Click to collapse
Hi, I started working again how you told me and everything is fine, but when I click on SEARCH PLAYER then OK / ACCEPT does not lead me to TASKER but to AUTOINPUT and see what happens when I enter AUTOINPUT afterwards. I do not know what I have to choose. I clicked on FIELD TYPE type. I did everything you said, but what should I choose when I returned the tasker?
dejanxxxx said:
Hi, I started working again how you told me and everything is fine, but when I click on SEARCH PLAYER then OK / ACCEPT does not lead me to TASKER but to AUTOINPUT and see what happens when I enter AUTOINPUT afterwards. I do not know what I have to choose. I clicked on FIELD TYPE type. I did everything you said, but what should I choose when I returned the tasker?
Click to expand...
Click to collapse
Yeh you will be taken back to auto input
Then you need to click on the first element and then select tick✓ option on top rignt corner
Then you will automatically be taken back to tasker
Next, you can continue further to add action , 185 sec.......
And yeh your attached file is corrupted I couldn't view it
Regards,
milkyway3
Good day. I did what you told me, I came to an end, but it makes me confused
Repeat the loop (after a 10 seconds waiting action from the automatic action i.e.from)
Done
What to do again, what to choose from these options in the window, it seems to me that I did not do nice and did not start SEARCH PLAYER, when I finish everything in the lower left corner of the PLAY icon do I have to click on it?
Here's a picture from GO-TO , where confused me what I need to choose
And on notification shows me no active profiles and look what shows more, and it is profile good?
Thanks so much
dejanxxxx said:
Good day. I did what you told me, I came to an end, but it makes me confused
Repeat the loop (after a 10 seconds waiting action from the automatic action i.e.from)
Done
What to do again, what to choose from these options in the window, it seems to me that I did not do nice and did not start SEARCH PLAYER, when I finish everything in the lower left corner of the PLAY icon do I have to click on it?
Here's a picture from GO-TO , where confused me what I need to choose
And on notification shows me no active profiles and look what shows more, and it is profile good?
Thanks so much
Click to expand...
Click to collapse
You have to choose the action number corresponding to the auto input action
There should be no reason for Tasker to show as no active profile
It also seems that you haven't purchased autoinput plugin. It is a paid app and you will have to purchase it to make it work
Regards,
milkyway3
milkyway3 said:
You can do this by using the Auto input tasker plugin
Create a task like
-if app launched
-wait .... Seconds
-Click on the search player area (using auto input plugin)
-again wait ... Seconds
-click on search player
Repeat the above loop
Hope my information was helpful
Regards,
milkyway3
Click to expand...
Click to collapse
milkyway3 said:
You have to choose the action number corresponding to the auto input action
There should be no reason for Tasker to show as no active profile
It also seems that you haven't purchased autoinput plugin. It is a paid app and you will have to purchase it to make it work
Regards,
milkyway3
Click to expand...
Click to collapse
You have to choose the action number corresponding to the auto input action<Which number should I choose?
Click to expand...
Click to collapse
I do not know why shows that there is no active profile. So until I buy AUTOINPUT, this can not work?
I'll record the whole process to see. Thanks.
milkyway3 said:
You have to choose the action number corresponding to the auto input action
Regards,
milkyway3
Click to expand...
Click to collapse
Can you tell me more about this, only this number / adjustment is missing for me to finish everything. I can not figure out what to choose. Thank you.
dejanxxxx said:
Can you tell me more about this, only this number / adjustment is missing for me to finish everything. I can not figure out what to choose. Thank you.
Click to expand...
Click to collapse
Could you just send me a screenshot of your *half created* profile so that I may assist you further
Regards,
milkyway3
milkyway3 said:
You have to choose the action number corresponding to the auto input action
There should be no reason for Tasker to show as no active profile
It also seems that you haven't purchased autoinput plugin. It is a paid app and you will have to purchase it to make it work
Regards,
milkyway3
Click to expand...
Click to collapse
milkyway3 said:
Could you just send me a screenshot of your *half created* profile so that I may assist you further
Regards,
milkyway3
Click to expand...
Click to collapse
Of course, thank you. I'll do it soon, here in a few minutes.
Here you go.
If you need to make a step-by-step recording, tell me.
Step by step .
dejanxxxx said:
Here you go.
If you need to make a step-by-step recording, tell me.
Click to expand...
Click to collapse
In this case, action number coresponds to 1 i.e.1 is the wait 10 seconds action
In the below video you have wrongly selected the autoinput action
You should click on add only at 2:48 i.e. when the search player option appears
You clicked even before starting the game (at the at the menu button on home screen)
milkyway3 said:
In this case, action number coresponds to 1 i.e.1 is the wait 10 seconds action
In the below video you have wrongly selected the autoinput action
You should click on add only at 2:48 i.e. when the search player option appears
You clicked even before starting the game (at the at the menu button on home screen)
Click to expand...
Click to collapse
I understand, I'm going to make a mistake, so I need to enter number 1? for GOTO?
And what should I choose from the drop-down menu in the task / goto?
You say that I only need to click on SEARCH PLAYER once?
Select add option in notification
Click on search player
Click on OK in notification
When the game ends, then I have to click first on ADD then SEARCH PLAYER and then OK? is that right?
This confuse me
I understand, after finishing the game, DO NOT MAKE CLICK ON SERACH PLAYER, only on OK / ADD?
If I'm no longer boring, I think I understand if this goes like this: after autoinput / easy setup / I first select the application and then click on ADD?
And I think I'm mistaken for adjusting the goto, I do not think I set a good setting.
I'd like to ask you once more to explain to me.
When I finish the profile, I click on the play icon, but again shows No active profiles
Thanks so much , very much thanks .
Just received the phone and already stumped, can't figure out how to disable the lock screen, so annoying when it locks! Thanks in advance
Solved! Thanks to Jamesbarr2000 on Reddit!
https://www.reddit.com/r/Huawei/comments/bdgz00/huawei_p_smart_2019_how_to_deactivate_lock_screen/
jamesbarr2000
2 points ·
10 hours ago
Settings - system - developer options - screen lock
The developer options menu is hidden by default, Try this 1 :Unlock your phone and go to Settings.
Step 2 : Under Settings, scroll down and open About phone.
Step 3 : Under About phone, find Build Number and tap seven times on it.
You will get a message on your screen that "you are now a developer"
Click to expand...
Click to collapse