Please Help ;(
i want to connect a PS3 controller to my Prime
i have done the setup (MAC adress)
now i want to Pair it but it says i shoud to tipp the CODE ( 6776) on the controller to Pair ??
wehn i Push the PS3 Button the controller Light are blink (all 4) , some second s later nothing Blink ;(
i have installed de Sixaxis Controller app , but it doesent works ;(
i start Sixaxis and give Root , then the Controller connectet ( Client Connected : 1 ) all lights Blink
some seconds later nothing Blink and ( Client Disconnected : 1 )
only a single light should be lit , but NOTHING lights ;(
i have RESET the Controller but its like before ;(
must i put it in the Dock ?
THANKS FOR ALL
any idear ?
This is the Controller
http://www.ebay.de/itm/160736356269?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Pls Help
Here is what I did:
1. Installed the Sixaxis Controller app, opened it, and found the local bluetooth adress on the bottom-left of the screen.
2. Downloaded and installed Motionjoy Gamepad Tool on my computer.
3. Connected my ps3 controller to my computer using USB, and clicked "BluetoothPair", then "Custom MAC" on Motionjoy.
4. Entered my prime's bluetooth adress, and clicked "Pair Now".
5. Removed the usb cable and went back to my prime and changed input method to "Sixaxis Controller".
6. Clicked "start" and waited for it to say "Successfully Configered Bluetooth" on the sixaxis app.
7. Pressed the home botton on my ps3 controller and voila, it's connected!
kidio007 said:
Here is what I did:
1. Installed the Sixaxis Controller app, opened it, and found the local bluetooth adress on the bottom-left of the screen.
2. Downloaded and installed Motionjoy Gamepad Tool on my computer.
3. Connected my ps3 controller to my computer using USB, and clicked "BluetoothPair", then "Custom MAC" on Motionjoy.
4. Entered my prime's bluetooth adress, and clicked "Pair Now".
5. Removed the usb cable and went back to my prime and changed input method to "Sixaxis Controller".
6. Clicked "start" and waited for it to say "Successfully Configered Bluetooth" on the sixaxis app.
7. Pressed the home botton on my ps3 controller and voila, it's connected!
Click to expand...
Click to collapse
THANKS a lot ,
but it doesn´t work for me ;(
i have done all from your HOW TO , but ...
i start Sixaxis , then the Controller connectet ( Client Connected : 1 ) all lights Blink
BUT some seconds later nothing Blink and ( Client Disconnected : 1 )
PLEASE HELP
Ok. When you connect the ps3 controller to the computer and open Motionjoy and click BluetoothPair, does it say "Have paired to:" then the bluetooth adress next to it? Since it does say "Client Connected" once, then I think you got the setup right though.
Did you try to connect the ps3 controller to the prime using USB and pressing the home botton? Are you able to use the controller with USB? If that works, then I would try sixaxis again and make sure wifi is turned off. If it still disconnects, then I would try connecting another bluetooth device to the prime, to check if that is the problem. Also, if you haven't, try to reboot. If it still doesn't work, then you might have to use the USB cable.
kidio007 said:
Ok. When you connect the ps3 controller to the computer and open Motionjoy and click BluetoothPair, does it say "Have paired to:" then the bluetooth adress next to it? Since it does say "Client Connected" once, then I think you got the setup right though.
Did you try to connect the ps3 controller to the prime using USB and pressing the home botton? Are you able to use the controller with USB? If that works, then I would try sixaxis again and make sure wifi is turned off. If it still disconnects, then I would try connecting another bluetooth device to the prime, to check if that is the problem. Also, if you haven't, try to reboot. If it still doesn't work, then you might have to use the USB cable.
Click to expand...
Click to collapse
Thanks one more time for your Help ,
"Have paired to:" NOTHING ?! ( see at the PIC please )
i connect it with the cable and press "Pair Controller" in the Sixaxis app
Sixaxis says =
Listening for Controllers.....
Master address updated
now when i Press my PS3 Button the Transformer goes to the HomeScreen ?
FIRST W-lan is not on ........
okay now i have install the Driver it connect toMotioninJoy and i have PAIR it to the Adress , but now when i start Sixaxis , it "Listening for Controllers ....."
i press the "P3 " button - the controller lights all 4 Blinks and....
Nothing (Sixaxis) Listening for Controllers .....
and the Controller s lights STOP blink ;(
EDIT 1:
okay i don´t now what i done but now the Sixaxis APP says one more time
Client connected: 1 ( The PS3 controllers lights are Blinking all 4 ! )
some seconds later ....
Client disconected : 1 ( The PS3 Controllers Lights are NOT blink )
THE CONTROLLER PS3 is not ORIGINAL , do you think thats the Problem ?
some one how can help PLS ?
WTF ;( ?
Try this and tell me if it works:
1. Plug controller in with USB port connected.
2. Play around with it to make sure it works for a bit.
3. Push the Playstation button and unplug it from the USB at the same time.
Weird, but it works for me, lol.
If you bought a cheap ps3 controller off ebay it might be the problem, yes. It should be super easy you see, so there might be something wrong with the controller. I'm assuming you don't have the dock, so you are not able to test if it works on the prime using usb?
When you are pairing it, this is how it should look like:
I don't have Sixaxis installed, it's unrooted, and it works fine with bluetooth. I don't know why you're going through the trouble of using Sixaxis at all.
Ov3rbyte said:
Try this and tell me if it works:
1. Plug controller in with USB port connected.
2. Play around with it to make sure it works for a bit.
3. Push the Playstation button and unplug it from the USB at the same time.
Weird, but it works for me, lol.
Click to expand...
Click to collapse
That actually worked lol, what the? xD Halljo, try this! Bluetooth has to be on of course.
Try it without bluetooth on too and tell me if it works please Kidio007.
Ov3rbyte said:
Try it without bluetooth on too and tell me if it works please Kidio007.
Click to expand...
Click to collapse
Tried 7 times, doesn't work for me when I turn off bluetooth. If it works for some with it off, then it's just a glitch probably.
I'm guessing it's a glitch, they fixed it in the update that I got I bet. Now it shows up in the actual bluetooth controllers in bluetooth settings, Woot! It caused reboots and i'm sure it was linked to that.
You conecct it without an app? If i want to pair manual it dont works .i have to do any settings in sixaxis ? Profil or anything?
Gesendet von meinem GT-I9100 mit Tapatalk
ok, first i had to wat da hell?
The knockoff PS3 controllers like the one you got from ebay DO NOT WORK. i learned that the hard way too. Something with how they authenticate, it works for a PS3 but barely, i can connect it to my computer and use it as a controller for that, but for sixaxis controller on my tablet, no way.
Spend the money, buy a real controller. Used game places, pawn shops, i found one with the old packaging at my local TheSource store (TheSource.ca) for like, 15% off. I bought it, it works awesome.
As far as apps go, sixaxis controller is the way to go. Pay the couple of bucks, its worth it. Actively updated, new features seemingly every other week. just do it. you wont be sorry.
As far as getting the controller to connect:
Get this app:
https://market.android.com/details?id=com.dancingpixelstudios.sixaxiscontroller&hl=en
Go to here and download the sixaxis pair tool:
http://www.dancingpixelstudios.com/sixaxiscontroller/tool.html
Other apps can do the same thing, i have used the one in the screenshots previous, however it reverses the mac address. Just use the one i linked, it works with no hassle.
Plug in sixaxis controller to your computer, use the tool to change the mac address.
Start the app on your tablet, it will turn off bluetooth if its on so no need to worry about that. start your sixaxis controller, it should connect pretty much no problem (as long as its genuine, if its a knockoff good luck)
The latest version of the app has a USB pair ability, you can connect your controller via USB and that, for whatever reason, worked on my knockoff controller. weird.
Hope this helps, i know its not the news your looking for. As of yet i cant find anything to get my cheap controller connected, aparently it uses nonstandard meathods for connecting to the PS3 so theres no definate way to make it work 100%.
Thanks for that i buy one and test it later.
I have to change the controller settings game by game ? Also for GTA one and other for shadowgun? Do you can send me your settings if i need it.
Thanks guys for your help
Gesendet von meinem GT-I9100 mit Tapatalk
One more problem is that when i change the input method to sixaxis and change back to hackers keyboard . The keyboard DON'T shows up
I have to restart the prime and sometimes it helps
Gesendet von meinem GT-I9100 mit Tapatalk
the trick of pushing the ps button and unplugging works for me too (without bluetooth on)
i have not turned bluetooth once since i got my prime and this little glitch works for me, and im not rooted
with the orginall PS3 controller works \fine jihaaaaa
but not vibrat. can i change that