Please Help ;(
i want to connect a PS3 controller to my Prime
i have done the setup (MAC adress)
now i want to Pair it but it says i shoud to tipp the CODE ( 6776) on the controller to Pair ??
wehn i Push the PS3 Button the controller Light are blink (all 4) , some second s later nothing Blink ;(
i have installed de Sixaxis Controller app , but it doesent works ;(
i start Sixaxis and give Root , then the Controller connectet ( Client Connected : 1 ) all lights Blink
some seconds later nothing Blink and ( Client Disconnected : 1 )
only a single light should be lit , but NOTHING lights ;(
i have RESET the Controller but its like before ;(
must i put it in the Dock ?
THANKS FOR ALL
any idear ?
This is the Controller
http://www.ebay.de/itm/160736356269?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Pls Help
Here is what I did:
1. Installed the Sixaxis Controller app, opened it, and found the local bluetooth adress on the bottom-left of the screen.
2. Downloaded and installed Motionjoy Gamepad Tool on my computer.
3. Connected my ps3 controller to my computer using USB, and clicked "BluetoothPair", then "Custom MAC" on Motionjoy.
4. Entered my prime's bluetooth adress, and clicked "Pair Now".
5. Removed the usb cable and went back to my prime and changed input method to "Sixaxis Controller".
6. Clicked "start" and waited for it to say "Successfully Configered Bluetooth" on the sixaxis app.
7. Pressed the home botton on my ps3 controller and voila, it's connected!
kidio007 said:
Here is what I did:
1. Installed the Sixaxis Controller app, opened it, and found the local bluetooth adress on the bottom-left of the screen.
2. Downloaded and installed Motionjoy Gamepad Tool on my computer.
3. Connected my ps3 controller to my computer using USB, and clicked "BluetoothPair", then "Custom MAC" on Motionjoy.
4. Entered my prime's bluetooth adress, and clicked "Pair Now".
5. Removed the usb cable and went back to my prime and changed input method to "Sixaxis Controller".
6. Clicked "start" and waited for it to say "Successfully Configered Bluetooth" on the sixaxis app.
7. Pressed the home botton on my ps3 controller and voila, it's connected!
Click to expand...
Click to collapse
THANKS a lot ,
but it doesn´t work for me ;(
i have done all from your HOW TO , but ...
i start Sixaxis , then the Controller connectet ( Client Connected : 1 ) all lights Blink
BUT some seconds later nothing Blink and ( Client Disconnected : 1 )
PLEASE HELP
Ok. When you connect the ps3 controller to the computer and open Motionjoy and click BluetoothPair, does it say "Have paired to:" then the bluetooth adress next to it? Since it does say "Client Connected" once, then I think you got the setup right though.
Did you try to connect the ps3 controller to the prime using USB and pressing the home botton? Are you able to use the controller with USB? If that works, then I would try sixaxis again and make sure wifi is turned off. If it still disconnects, then I would try connecting another bluetooth device to the prime, to check if that is the problem. Also, if you haven't, try to reboot. If it still doesn't work, then you might have to use the USB cable.
kidio007 said:
Ok. When you connect the ps3 controller to the computer and open Motionjoy and click BluetoothPair, does it say "Have paired to:" then the bluetooth adress next to it? Since it does say "Client Connected" once, then I think you got the setup right though.
Did you try to connect the ps3 controller to the prime using USB and pressing the home botton? Are you able to use the controller with USB? If that works, then I would try sixaxis again and make sure wifi is turned off. If it still disconnects, then I would try connecting another bluetooth device to the prime, to check if that is the problem. Also, if you haven't, try to reboot. If it still doesn't work, then you might have to use the USB cable.
Click to expand...
Click to collapse
Thanks one more time for your Help ,
"Have paired to:" NOTHING ?! ( see at the PIC please )
i connect it with the cable and press "Pair Controller" in the Sixaxis app
Sixaxis says =
Listening for Controllers.....
Master address updated
now when i Press my PS3 Button the Transformer goes to the HomeScreen ?
FIRST W-lan is not on ........
okay now i have install the Driver it connect toMotioninJoy and i have PAIR it to the Adress , but now when i start Sixaxis , it "Listening for Controllers ....."
i press the "P3 " button - the controller lights all 4 Blinks and....
Nothing (Sixaxis) Listening for Controllers .....
and the Controller s lights STOP blink ;(
EDIT 1:
okay i don´t now what i done but now the Sixaxis APP says one more time
Client connected: 1 ( The PS3 controllers lights are Blinking all 4 ! )
some seconds later ....
Client disconected : 1 ( The PS3 Controllers Lights are NOT blink )
THE CONTROLLER PS3 is not ORIGINAL , do you think thats the Problem ?
some one how can help PLS ?
WTF ;( ?
Try this and tell me if it works:
1. Plug controller in with USB port connected.
2. Play around with it to make sure it works for a bit.
3. Push the Playstation button and unplug it from the USB at the same time.
Weird, but it works for me, lol.
If you bought a cheap ps3 controller off ebay it might be the problem, yes. It should be super easy you see, so there might be something wrong with the controller. I'm assuming you don't have the dock, so you are not able to test if it works on the prime using usb?
When you are pairing it, this is how it should look like:
I don't have Sixaxis installed, it's unrooted, and it works fine with bluetooth. I don't know why you're going through the trouble of using Sixaxis at all.
Ov3rbyte said:
Try this and tell me if it works:
1. Plug controller in with USB port connected.
2. Play around with it to make sure it works for a bit.
3. Push the Playstation button and unplug it from the USB at the same time.
Weird, but it works for me, lol.
Click to expand...
Click to collapse
That actually worked lol, what the? xD Halljo, try this! Bluetooth has to be on of course.
Try it without bluetooth on too and tell me if it works please Kidio007.
Ov3rbyte said:
Try it without bluetooth on too and tell me if it works please Kidio007.
Click to expand...
Click to collapse
Tried 7 times, doesn't work for me when I turn off bluetooth. If it works for some with it off, then it's just a glitch probably.
I'm guessing it's a glitch, they fixed it in the update that I got I bet. Now it shows up in the actual bluetooth controllers in bluetooth settings, Woot! It caused reboots and i'm sure it was linked to that.
You conecct it without an app? If i want to pair manual it dont works .i have to do any settings in sixaxis ? Profil or anything?
Gesendet von meinem GT-I9100 mit Tapatalk
ok, first i had to wat da hell?
The knockoff PS3 controllers like the one you got from ebay DO NOT WORK. i learned that the hard way too. Something with how they authenticate, it works for a PS3 but barely, i can connect it to my computer and use it as a controller for that, but for sixaxis controller on my tablet, no way.
Spend the money, buy a real controller. Used game places, pawn shops, i found one with the old packaging at my local TheSource store (TheSource.ca) for like, 15% off. I bought it, it works awesome.
As far as apps go, sixaxis controller is the way to go. Pay the couple of bucks, its worth it. Actively updated, new features seemingly every other week. just do it. you wont be sorry.
As far as getting the controller to connect:
Get this app:
https://market.android.com/details?id=com.dancingpixelstudios.sixaxiscontroller&hl=en
Go to here and download the sixaxis pair tool:
http://www.dancingpixelstudios.com/sixaxiscontroller/tool.html
Other apps can do the same thing, i have used the one in the screenshots previous, however it reverses the mac address. Just use the one i linked, it works with no hassle.
Plug in sixaxis controller to your computer, use the tool to change the mac address.
Start the app on your tablet, it will turn off bluetooth if its on so no need to worry about that. start your sixaxis controller, it should connect pretty much no problem (as long as its genuine, if its a knockoff good luck)
The latest version of the app has a USB pair ability, you can connect your controller via USB and that, for whatever reason, worked on my knockoff controller. weird.
Hope this helps, i know its not the news your looking for. As of yet i cant find anything to get my cheap controller connected, aparently it uses nonstandard meathods for connecting to the PS3 so theres no definate way to make it work 100%.
Thanks for that i buy one and test it later.
I have to change the controller settings game by game ? Also for GTA one and other for shadowgun? Do you can send me your settings if i need it.
Thanks guys for your help
Gesendet von meinem GT-I9100 mit Tapatalk
One more problem is that when i change the input method to sixaxis and change back to hackers keyboard . The keyboard DON'T shows up
I have to restart the prime and sometimes it helps
Gesendet von meinem GT-I9100 mit Tapatalk
the trick of pushing the ps button and unplugging works for me too (without bluetooth on)
i have not turned bluetooth once since i got my prime and this little glitch works for me, and im not rooted
with the orginall PS3 controller works \fine jihaaaaa
but not vibrat. can i change that
new to the forums, read the sticky, is this the right place?
I'm sure this has been done to death on these forums, or maybe I'm just not reading the right thing, but...
I'm trying to use my Android Tablet to run as a Second Screen on my PS4. I have gotten the app to connect and I can see the Playstation screen on my device, but I cannot get the Dualshock to connect.
I have run the sixaxis app on my PC to change master for the dualshock controller to match the mac address of my tablet, and I think they see eachother, but when it asks me if I want to pair them and I press yes, the controller turns off. EVERY TIME. What am I doing wrong?
I have a rooted Samsung galaxy tab 2 gt-p5113, sixaxis controller app, and the rooted playstation connect apk.
Hello Folks,
I was curious to know if anyone has ever tried the Amazon Fire TV game controller with the Shield tablet.
A few posts confirmed that it works fine with the Shield TV, but I found none about the tablet.
Would all the controls work seamlessly ? Voice search too?
Also, the original Shield controller can act as a mouse controller on the Shield with the right stick, would this feature also work with the Fire TV controller ?
Thanks in advance for your help.
Mat.
i ve own the first fire controller, its working fine... better than my ipega
voice i dont know, but mouse works also fine...
If you're talking about the newer model (Wi-Fi Direct) version of the Amazon controller, it can be made to work in a roundabout way. You'll need root and some kind of local terminal program or ADB.
Basically, you can use the stock "accessories" app to try to pair it, and the controller will start working for a while, then the app will say there was a problem communicating and disconnect the pad again, not completing the pairing.
My workaround is to kill the pairing app while the controller is working. You'll need to do it in the background, since even opening the settings app will make the controller disconnect right away.
The process name you're trying to kill will be "com.nvidia.blakepairing". Ignore the quotes.
If you're on an ADB shell you can do it from your PC as soon as you can move the mouse pointer around with the joystick (become root first with su)
Code:
killall com.nvidia.blakepairing
If you're doing it from a terminal emulator, you should have it wait for about 25-35 seconds to give you time to get it running beforehand. Use this:
Code:
su
(sleep 30; killall com.nvidia.blakepairing)&
You'll also need to go to Developer Options and "disable USB audio routing", because otherwise you won't have any sound come out - it seems like it tries to play sound through the 3.5mm jack on the gamepad, but the volume is zero (faint hissing whenever a sound should play). When it does that, neither the speakers or the headphone jack that's on the tablet work at all.
Wouldn't an xbox/ps controller work better? I use an xbox360 controller via usb otg and seems to work really well for most things.
Hello, everyone!
As I have not found anything on this, neither on XDA, nor using friend Google, I'm posting this hoping to find a solution.
So I have an original PS4 bluetooth controller and it works like a charm with other devices (Win 8.1 laptop, K1 Shield on Android 7, Sony ZX2 on Android 8). but not on the M5.
Trying to pair it with the M5 first brings up an error message "Pairing failed Incorrect pairing key or the device you want to pair with is configured incorrectly. Tray again after viewing Help." ... which doesn't help.
A second attempt will then magically pair the device, but to no effect. It is shown as paired and coected, but will not work with the tablet and apps supporting controllers will not recognize that a controller is connected. Also the controller itself shows the "idle" instead of the "connected" light.
So, does anyone have any ideas how to solve this? I re-paired the controller with all other devices, just to make sure, and it worked. So the controller is still functioning.
If it's anything like the DS3 (dual shock 3) then the controller is very finicky and requries custom software. There's probably an app for it, the Sony phone will have the driver pre installed because it's sony, and probably the shield too.
If it's connected, then yeah there's no hardware fault, just needs the driver.
Michaelflat1 said:
If it's anything like the DS3 (dual shock 3) then the controller is very finicky and requries custom software. There's probably an app for it, the Sony phone will have the driver pre installed because it's sony, and probably the shield too.
If it's connected, then yeah there's no hardware fault, just needs the driver.
Click to expand...
Click to collapse
Well, PS3 controllers truly are difficult to set up, but not so PS4 controllers: Turn on bluetooth, put them into pairing mode, pair, done. I had my PS3 controller with Sixaxis running after much hassle but the PS4-one is really easy to set up. And I did it on multiple Android devices.
And then comes the M5 ...
By the way: Sixaxis does not support the M5.
Yeah I did notice the same thing on my M5 Pro.
I wanted to play the odd mame game with it, and as you say it paired on the 2nd attempt, but I couldn't get any controls to respond to any buttons/triggers etc.
I haven't tried using an OTG cable to see if it will work via cable, but disappointing that it connects but still doesn't work.
Can confirm that DualShock 4 and wired Switch controllers work with a USB C OTG cable.
Hi, it looks like that the Pad have a general Problem with Bluetooth controllers, because i tried a snakebyte controller:vr and the controller hangs or it is "endless scrolling" and in games very unprecise. the same Controller work with a P20 Pro like charm. So it looks like the Problem ist the m5 Pro. Oh, and the same with the PS4 Controller M5 + wired Ps4 working, M5 + Bluetooth PS4 "He´s dead jim", P20 Pro wired/bluetooth Ps4 working.
KleinerKObold said:
Hi, it looks like that the Pad have a general Problem with Bluetooth controllers, because i tried a snakebyte controller:vr and the controller hangs or it is "endless scrolling" and in games very unprecise. the same Controller work with a P20 Pro like charm. So it looks like the Problem ist the m5 Pro. Oh, and the same with the PS4 Controller M5 + wired Ps4 working, M5 + Bluetooth PS4 "He´s dead jim", P20 Pro wired/bluetooth Ps4 working.
Click to expand...
Click to collapse
just anyone connect the ps4? i have the same problem :\
dudestone said:
just anyone connect the ps4? i have the same problem :\
Click to expand...
Click to collapse
Is there something new about this issue? Someone tried with custom rom?