Hi guys,
I have my Lenovo Ideapad A10 Android Laptop/Tablet.
The device here:
shop.lenovo*com/gb/en/laptops/lenovo/a-series/a10/
Virus has infected my tablet and virus has infected in tablet recovery. I'm doing a hard reset, but the virus (pornclub applications )again loading. I don't know how this virus is transmitted. This device is using my son. He's only 10 years old.
question-1: I want to install firmware with computer to tablet. I could not find anywhere that the tablet's firmware. Where can I get (or download) the android firmware for these tablets.
question-2:
I want to install windows8 on the ideapad A10. Is this possible? How can I boot USB drive or the DVD?
question-3: How do I remove this virus from recovery firmware? Antivirus failed to clear them.
Thank you for help.
Kind regards...
tulliana said:
Hi guys,
I have my Lenovo Ideapad A10 Android Laptop/Tablet.
The device here:
shop.lenovo*com/gb/en/laptops/lenovo/a-series/a10/
Virus has infected my tablet and virus has infected in tablet recovery. I'm doing a hard reset, but the virus (pornclub applications )again loading. I don't know how this virus is transmitted. This device is using my son. He's only 10 years old.
question-1: I want to install firmware with computer to tablet. I could not find anywhere that the tablet's firmware. Where can I get (or download) the android firmware for these tablets.
question-2:
I want to install windows8 on the ideapad A10. Is this possible? How can I boot USB drive or the DVD?
question-3: How do I remove this virus from recovery firmware? Antivirus failed to clear them.
Thank you for help.
Kind regards...
Click to expand...
Click to collapse
There is an update in the Drivers & Software of Ideapad A10 support page of Lenovo
download.lenovo.com/consumer/open_source_code/a10_open_source.tar.gz
Is this file "Open Source Code - Lenovo A10" The Stock ROM?
If yes - please help me regarding Flashing of the device with this
I had the same problem, fortunately for me I could update system via system update. I dont know if this is going to help you I extracted using romdump files from lenovo a10 that was not infected. Unfortunately I could not write files back.
Related
Hello
I have a Chinese tablet " INTEX AVATAR" android ICS 4.0.4 firmware rockchip which is bricked. Happens when I try to update it with a new firmware. Over identify it as unknown device but manage to fix it and now it shows RK29 device, the problem now is when I try to update it, it show an error, Prepare IDB Fail. Can't set it to recovery, I try CMW boot using sd card too no success.
Any help please
freemega said:
Hello
I have a Chinese tablet " INTEX AVATAR" android ICS 4.0.4 firmware rockchip which is bricked. Happens when I try to update it with a new firmware. Over identify it as unknown device but manage to fix it and now it shows RK29 device, the problem now is when I try to update it, it show an error, Prepare IDB Fail. Can't set it to recovery, I try CMW boot using sd card too no success.
Any help please
Click to expand...
Click to collapse
I have the same problem with a romanian tablet. Evolio Evotab 2. it has the Rockchip RK29 and i bricked it and now it wont power up,won;'t do anything. On windows 7 is shows like USB Device Not recognized.I tried every rk29 driver i could find but no luck. It won't even install them and it says that the best driver for your device is already installed. But no driver is installed.
Can someone help me?
Intex RK2918 based tab
I'm having an INTEX iTab. How did you update the tab? If it is an official update you'll have to take the tab to INTEX Service Center. There's no Intex PC Suite available at present,so you can't update it over internet. But, you can flash new ROMs to the tab. Refer to INTEX iTab thread. It may contain something useful. Or ask OMA if you want to flash custom ROMs.
Device : Karbonn Smart Tab 10
Problem : Hard Bricked
I have been trying to upgrade my ST 10 to custom rom available in this forum. But after update, tab was stuck in Red Boot Logo Screen. Then I tried many things but no success. Finally something went wrong and not device is not even responding to power switch.
Then I found on google that AMLOGIC flash tool can flash and restore tab. By hit and trial methods ... now i am able to connect my tab to PC and AMLOGIC flash tool detects it.
Device Manager of my Windows7 shows Tab as WORLDCUP DEVICE. But I am not able to go further from here as I dont have correct zip with some config xml file.
Please help.
Maybe I am using wrong software to flash (AMLOGIC). Then suggest better one along with files required.
Please Help !!
(Bump)
Karbonn tab 10
if you find any way please tell me because my karbonn tab 10 hard bricked and its not turn on i have using amlogic method but it says cannot find disk please help
Any luck?
Hey, my younger brother bricked his ST10 recently... Any luck in unbricking it? I can't even get to installing the drivers so that the tab shows as worldcup device in the device manager... I can only see Android ADB interface in the device manager (Running windows 10) and in Devices and Printers I see the device as "Velox"...
Hi, were you able to find any solution to your 'deep brick' of Karbonn S10? I'm facing the same issue with my Karbonn tab-8 velox.
Hello guys, i need your help.. I have an rk2918 tablet, its name is teclast p85a and i bricked it.. anyway i have installed a couple of roms but none of them worked(actually the 2nd one turned the screen into grey but that all)..anyway i plugged in my tablet but now my computer detects it as an Full AOSP rk29sdk device and not as RK29 device(which it was before i installed these roms). Now when i go to device manager in order to update the software and put rockusb.inf for windows 7-64 bit i get this error: Make sure you have selected the correct firmware for your operating system(windows 7-64bit) WHICH IS WHAT I DO..So now RKbatchtool doesnt recognize my tablet and i cant flash it with any rom... Does anyone know what to do?? Please i am completely lost.. Thanks in advance!!
Hi everyone,
A couple of days I posted in XDA Assist and was asked to seek help here. Therefore, I'm posting my original post here, along with some updates at the end.
Original Post:
#####################
I've got a reasonably unknown Tablet PC.. Here are the specs and miscellaneous information;
Name: Ainol Numy 3G P97
Internal Memory: 16GB
RAM: 1GB
GPU: Mali-400 MP
SoC: MediaTek MT8382 ARM Cortex A7 @ 1.3Ghz (Quad Core)
OS: Android Jellybean 4.2.2 (I'm pretty sure it's a Custom ROM)
Kernel Version: 3.4.5
Build Number: Numy_3G_P97_V1_2014090215
Custom Build Version: 1.19_20140822
Root Access: No (I never tried to root the device, never had a reason to do so)
I've been searching around for ways to upgrade the OS from Jellybean to Lollipop or higher. I've searched extensively within XDA Developers' various forums, but there doesn't seem to be any post in relation with my device.
I took to the internet and found some websites offering Flash Tools, Firmware (nothing above KitKat, or so it seems) and Android Studio. I've tried (in vain) to go through some tutorials on YouTube, but haven't come across anyone who's done anything with this particular device.
However, I have a rough idea rattling around in my head of what needs to be done, but I just need guidance from the Developers here to tell me how to get about doing it.
I have the following software downloaded;
1. MediaTek USB Drivers and Flash tools
2. SP Flash Tool v5.1620
3. Official Android Jellybean 4.2.2 System Image for the device
4. Android Lollipop 5.0 System Image (the site I downloaded it from says the Firmware is for a different tablet pc, but with the same specs as my device)
5. Android Studio (latest version, direct download from Google) - I read in some sites that Android Studio would help a lot to install a Custom ROM into any Android device, hence the download.
I'd greatly appreciate anyone helping me out in this endeavor. I'd like to install Lollipop (at least) on my Tablet PC, in order to gain some functionality as well as improved performance (hopefully!), as the current Jellybean OS is terribly laggy. I've seen other Tablet PC's with lesser specs running Lollipop smoothly, so I'm hopeful that there might be a silver lining to an otherwise very dark and sinister looking thunderstorm.
#####################
End Post
Updates:
While waiting, I've tried a few things. I downloaded the following;
1. Android SDK Tools with Platform Tools
2. Android Lollipop system images x 2 (.img file format) (similar specs to my Tablet PC)
3. Android Lollipop system image x 1 (.zip file format) (similar specs to my Tablet PC)
4. Android KitKat system image x 1 (supposedly the original and official KitKat OS for my Tablet PC)
5. Kingo Root app (Windows version)
Here's what I tried:
I tried using ADB to sideload a Lollipop system image (.zip file format) through a custom recovery already installed on my Tablet PC. Each time I tried, the installation would just stop with "Installation aborted". No matter what I did, I couldn't get it to work.
Next, I tried to "update" the current OS (Jellybean 4.2.2) to KitKat using the "official update" I found on the net, for my Tablet PC. I used SP Flash Tools to try and load the file, but that didn't pan out, as there was something corrupted in the Scatter file. Each time I tried to load the Scatter file, I'd get the error message that it was corrupted. Didn't know what else to do.
Following that, I read some articles where rooting the device in question was suggested, so I searched around for a bit, found the Kingo Root app, used it and rooted my device. Then, I tried using ADB again, this time using a more traditional method of custom ROM installation. But once I got to the Fastboot commands, I couldn't get any further. My device did boot up in Fastboot mode, but I got lost after that.
As of yet, my device is still running Jellybean 4.2.2. I've refurbished it by doing a master reset, but I'd really like to get Lollipop in, if it's possible. Any help would be much appreciated.
Thanks!
Serious help needed please!
I really need help, people, on this issue! Isn't there some kind soul who will respond??
Hi. I have a Lenovo Tab 4 8 inch tablet (TB-8704F). I rooted the tablet and in the process of trying to get rid of the Wifi feature I tried deleting the file wlan.ko from /system/lib/modules. Now the tablet refuses to start and it's not detected by my computer. I assume it's soft or hard bricked. Anyone could help to re-soft it or something like that?
Any luck yet ?
Any luck yet? Can you get the device in Fastboot mode ? In case you need IMG files: Using the brilliant YouTube tutorial from RootJunky on 'How to pull your own stock Android firmware from your device', I have pulled BOOT.IMG, SYSTEM.IMG and RECOVERY.IMG from my device, TB-8704F - Android 8.1.0.