Hi I am Ali. I had a galaxy s2 gt- i9100 which i updated through odin using a stock firmwaire i downloaded from sammobile. So my firend ask me to do thesame with his. When i try using thesame rom with odin it failed and the phone displayed a yellow triangle with an exclamation + mobile and computer icon. Then i flashed a siyah 4.0.1 kernel it came on anfd just stopped at the boot logo. Now i don't know what to do. I am confuse. Please i need help
Download a stockrom for your model again, and flash it with odin, dont flash custom rom untill you finish booting the stockrom first time.
Reflashing gt i9100 with new rom
I Downloaded a new rom today this morning android 4.0.3 and still can't flash it with odin. Should i download and flash it with the rom which already there in the phone before i try updating it?
Related
some one helps~~!!
I tried to flash my I9100G to Lite'ning ROM firmware 5.0, I using ODIN 1.85 to flash. Follow the step by step from xda recommanded.everything start smooth during start but it just show failed after all.
and my S2 is hang and show black scree..how can it recover? do I download another firmware to re-flash it again? any way to do factory recovery?
Please help!!!
no body helps??
the i9100G phone is incompatible with all international i9100 ROM's
which means my I9100G = brick? Any recovery method ? please help~~
Hi everyone,
First off I apologize if this is too stupid, but I am a complete newbie at this (yes, I watched the noob video before registering).
I rooted my galaxy s2 GT-I9100 using the Odin insecure kernel --> S2 root --> Odin secure kernel method. Then i installed CWM Rom manager. However it says that I do not have CWM Recovery on the phone, I cannot flash the ROM. So I downloaded recovery-clockwork-4.0.1.5-galaxys2.zip and flashed it to the phone using Odin. It shows PASSED but the phone was stuck at the boot-up screen with the yellow triangle.
I tried to flash the CF-root kernel onto the phone, which many said will solve the problem, however it seems the kernel for this phone "ZSLPE" is very rare (phone purchased in Hong Kong) and I cannot find anything with this particular kernel. Also, when I connect the phone via Odin and try to flash anything, it now gets stuck at "setting up connection", so i suppose even if i find the right kernel, it cannot be loaded onto the phone. Please help! I will be eternally grateful.
yellowtriangle said:
Hi everyone,
First off I apologize if this is too stupid, but I am a complete newbie at this (yes, I watched the noob video before registering).
I rooted my galaxy s2 GT-I9100 using the Odin insecure kernel --> S2 root --> Odin secure kernel method. Then i installed CWM Rom manager. However it says that I do not have CWM Recovery on the phone, I cannot flash the ROM. So I downloaded recovery-clockwork-4.0.1.5-galaxys2.zip and flashed it to the phone using Odin. It shows PASSED but the phone was stuck at the boot-up screen with the yellow triangle.
I tried to flash the CF-root kernel onto the phone, which many said will solve the problem, however it seems the kernel for this phone "ZSLPE" is very rare (phone purchased in Hong Kong) and I cannot find anything with this particular kernel. Also, when I connect the phone via Odin and try to flash anything, it now gets stuck at "setting up connection", so i suppose even if i find the right kernel, it cannot be loaded onto the phone. Please help! I will be eternally grateful.
Click to expand...
Click to collapse
Download .tar (Odin version) version of Siyah kernel here: www.gokhanmoral.com/gm/2012/07/29/siyahkernel-s2-v3-5/
Flash the kernel via Odin.
Ps: asking questions, or even searching could have saved you all these mess because, ROOTING ICS doesn't really require flashing any kernel unlike gingerbread.
Swyped from my Samsung Galaxy SII
yellowtriangle said:
Hi everyone,
First off I apologize if this is too stupid, but I am a complete newbie at this (yes, I watched the noob video before registering).
I rooted my galaxy s2 GT-I9100 using the Odin insecure kernel --> S2 root --> Odin secure kernel method. Then i installed CWM Rom manager. However it says that I do not have CWM Recovery on the phone, I cannot flash the ROM. So I downloaded recovery-clockwork-4.0.1.5-galaxys2.zip and flashed it to the phone using Odin. It shows PASSED but the phone was stuck at the boot-up screen with the yellow triangle.
I tried to flash the CF-root kernel onto the phone, which many said will solve the problem, however it seems the kernel for this phone "ZSLPE" is very rare (phone purchased in Hong Kong) and I cannot find anything with this particular kernel. Also, when I connect the phone via Odin and try to flash anything, it now gets stuck at "setting up connection", so i suppose even if i find the right kernel, it cannot be loaded onto the phone. Please help! I will be eternally grateful.
Click to expand...
Click to collapse
If you're on ICS you can flash siyah kernel for S2(the .tar file) and you'll get custom recovery and root at the same time. Kernel are usually universal you don't need to find the specific kernel for your rom. Only if you're using a 4.0.4 rom you have to use a 4.0.4 kernel same goes for the 4.0.3 because you're going to have bugs with the camera etc
duykhang524 said:
If you're on ICS you can flash siyah kernel for S2(the .tar file) and you'll get custom recovery and root at the same time. Kernel are usually universal you don't need to find the specific kernel for your rom. Only if you're using a 4.0.4 rom you have to use a 4.0.4 kernel same goes for the 4.0.3 because you're going to have bugs with the camera etc
Click to expand...
Click to collapse
Thanks a lot for the reply. I believe the phone was running on ICS 4.0.3. Can I still flash the Siyah kernel? Also it seems that when trying to flash anything with Odin, it gets stuck at "setting up connection" stage and does not proceed.
yellowtriangle said:
Thanks a lot for the reply. I believe the phone was running on ICS 4.0.3. Can I still flash the Siyah kernel? Also it seems that when trying to flash anything with Odin, it gets stuck at "setting up connection" stage and does not proceed.
Click to expand...
Click to collapse
Yeah. Flash the Siyah kernel.
Are you sure kies is not running?
Swyped from my Samsung Galaxy SII
Jokesy said:
Yeah. Flash the Siyah kernel.
Are you sure kies is not running?
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
I exited Kies, so yes I don't think it's running. Plus Odin was able to flash the CWM recovery onto the phone right before it got stuck at the yellow sign. After that it stopped working.
Should I flash the latest version of Siyah (v4.1.4) instead of the one you suggested?
Thanks again
yellowtriangle said:
I exited Kies, so yes I don't think it's running. Plus Odin was able to flash the CWM recovery onto the phone right before it got stuck at the yellow sign. After that it stopped working.
Should I flash the latest version of Siyah (v4.1.4) instead of the one you suggested?
Thanks again
Click to expand...
Click to collapse
Both should work, but i suggest you Flash mine.
Is Odin working now? If not reboot your Pc and try again
Swyped from my Samsung Galaxy SII
Jokesy said:
Both should work, but i suggest you Flash mine.
Is Odin working now? If not reboot your Pc and try again
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Thanks for all the help. The phone is now back and running. However there is now another problem. After I flashed CM10 jelly bean 4.1.1, Google Play has gone missing. The little shopping bag icon is no longer there and I cannot find it in the app list either. Any help?
yellowtriangle said:
Thanks for all the help. The phone is now back and running. However there is now another problem. After I flashed CM10 jelly bean 4.1.1, Google Play has gone missing. The little shopping bag icon is no longer there and I cannot find it in the app list either. Any help?
Click to expand...
Click to collapse
After you flashed CM10, you were suppose to flash gapps. So flash Gapps now
Hi Everybody,
Can you help me please, my wife phone SGS2, is stuck on the Galaxy start screen, it keep rebooting every few seconds and return to the same screen. I can get to the Download mode but cant get to recovery mode. I have tried to flash stock rom (I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5) and (I9100XWLP7_I9100OXELP7_I9100XXLPS_HOME.tar) and even the CM9 Resurrection editon (cm-9-20120420-ODIN-galaxys2.tar). I tried the instruction in these threads (http://forum.xda-developers.com/showthread.php?t=1457458) and (http://forum.xda-developers.com/showthread.php?t=1916331). I couldnt fully understand the instruction in this thread about the PIT file but tried to flash the stock PIT file for my device with the other modem, code, CSC files through ODIN. in all my trials through ODIN the process will finish and I will get the PASS result and then the phone will restart to the same Samsung galaxy screen. can you help me please.
Alsager said:
Hi Everybody,
Can you help me please, my wife phone SGS2, is stuck on the Galaxy start screen, it keep rebooting every few seconds and return to the same screen. I can get to the Download mode but cant get to recovery mode. I have tried to flash stock rom (I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5) and (I9100XWLP7_I9100OXELP7_I9100XXLPS_HOME.tar) and even the CM9 Resurrection editon (cm-9-20120420-ODIN-galaxys2.tar). I tried the instruction in these threads (http://forum.xda-developers.com/showthread.php?t=1457458) and (http://forum.xda-developers.com/showthread.php?t=1916331). I couldnt fully understand the instruction in this thread about the PIT file but tried to flash the stock PIT file for my device with the other modem, code, CSC files through ODIN. in all my trials through ODIN the process will finish and I will get the PASS result and then the phone will restart to the same Samsung galaxy screen. can you help me please.
Click to expand...
Click to collapse
Did you try flashing just the Siyah or Dorimanx kernel using Odin and get to CWM recovery? It had worked for me once. Once in CWM recovery, I flashed one of the ROMS I knew was working for me and got my phone working.
adityawagle said:
Did you try flashing just the Siyah or Dorimanx kernel using Odin and get to CWM recovery? It had worked for me once. Once in CWM recovery, I flashed one of the ROMS I knew was working for me and got my phone working.
Click to expand...
Click to collapse
I tried flashing the Dorimanx kernel, but still didn't boot into recovery, will try the Dotage kernel and let you know. Than
Sent from my HTC Sensation using xda app-developers app
Hi,
I just tried to flash CWM with Odin. Odin told me "Pass!" but my Galaxy S2 is stuck on the yellow triangle since the reboot. What should I do, please?
I have Odin 1.85
I downloaded this CWM: download.chainfire. eu/51/CF-Root/SGS2/CF-Root-SGS2_XW_XEF_KJ2-v5.0-CWM5.zip (remove space before .eu)
I have:
GT-I9100
Android 4.0.3
Bande de base I9100XXLPX
Kernel 30.015-I9100XWLPG-CL619441 [email protected] #3
Version IML74K.XWLPG
PDA I9100XWLPG
Phone I9100XXLPX
CSC I9100BOGLP8
Build info : Thu May 24 17:50:50 KST 2012
Thank you...
Re: [HELP] Yellow Triangle After Flashing CWM with Odin
Can you boot into recovery. Power+Home+Vol Up
Sent from my HTC One XL using xda premium
Seems to work.
But volume down (restart) leads to the same problem again.
Volume up (continue), then?
Re: [HELP] Yellow Triangle After Flashing CWM with Odin
Zuddi said:
Seems to work.
But volume down (restart) leads to the same problem again.
Volume up (continue), then?
Click to expand...
Click to collapse
If you can get in CWM download your desired ROM. If not download an Odin version of Android 4.1 JellyBean for your phone and flash that.
Sent from my HTC One XL using xda premium
weeo said:
If you can get in CWM download your desired ROM. If not download an Odin version of Android 4.1 JellyBean for your phone and flash that.
Click to expand...
Click to collapse
Sorry, but I don't get it
I don't know if I can "get in CWM" because I never used it. I tried to install CWM for the first time as I want to install a new Rom on my phone. It's rooted but I have never changed the Rom.
I just tried to re-flash this CWM but it still doesn't work. I guess I need to find something else to flash with Odin (is this Odin 1.85 ok?) but I don't know what.
Ok I tried with CF-Root-SGS2_XW_INU_KL1-v5.0-CWM5.zip but it doesn't work either.
Please tell me what to flash, I'm starting to worry...
Re: [HELP] Yellow Triangle After Flashing CWM with Odin
Siyah v5 is what you need.
Sent from the little guy
Re: [HELP] Yellow Triangle After Flashing CWM with Odin
You need triangle away in the play store
Sent from my Galaxy Nexus using xda app-developers app
Re: [HELP] Yellow Triangle After Flashing CWM with Odin
I think he's stucked at the yellow triangle, can't get it to boot.
Sent from the little guy
I don't know where to find the right Siyah v5. Do you have a link, maybe?
Re: [HELP] Yellow Triangle After Flashing CWM with Odin
Ummmmmm.....gokhnanmoral.com?
Sent from the little guy
Ok, I didn't know the official site and found only millions of different tutos with different links when I searched. I'm a real newbie at this!
Thank you very much, flashing Siyah worked well.
Glad to hear that
Sent from the little guy
Hi there guys,
Hope anyone can help, i didnt start a new thread since i have the same issue as the OP.
I was on stock 4.0.3 XWLP7, I wanted to root, so i flashed CF-Root via Odin, all went well, but then when the phone rebooted, it is now stuck on the Yellow triangle.
I tried it all, flashed Siyah 5.0.1, still stuck, reflashed the CF-Root, still stuck, and also tried flashing the stock XWLP7 Kernel, and still stuck.
I can still go to download mode, but can't get into recovery.
I am really hoping i can solve this without flashing stock FW, as i need the data on the phone.
Any assistance will be much appreciated.
r u sure u flashed rite kernel for 4.0.3 im im rite syiah5is for jb . try to find tar version of root kernel for ,4.0.3 and flash vis odin
Sent from my GT-I9100 using xda premium
hi all,
i just purchased this S2 I9100 handset from one of my freind..he had rooted and installed some kitkat resurrenction mix custom rom which i did not like
i flashed cwm through odin but when it rebooted in yellow traingle..i cna go into cwm recovery mode by presiing (vol up+power+home), yellow triangle appears briefly and then cwm menu appears..but when i select REBOOT SYSTEM it again goes into yellow traiangle..
i have searched on net and right now downloading stock rom from sammy I9100XWLST FOR indian s2 i9100LKAINU
my question is if i just flash this rom thru odin will the triangle go away? odin or copy to sd card and flash via cwm?
or do i have to download kernel seperately also,..where do i find if yes?
thanks
dheerpat said:
hi all,
i just purchased this S2 I9100 handset from one of my freind..he had rooted and installed some kitkat resurrenction mix custom rom which i did not like
i flashed cwm through odin but when it rebooted in yellow traingle..i cna go into cwm recovery mode by presiing (vol up+power+home), yellow triangle appears briefly and then cwm menu appears..but when i select REBOOT SYSTEM it again goes into yellow traiangle..
i have searched on net and right now downloading stock rom from sammy I9100XWLST FOR indian s2 i9100LKAINU
my question is if i just flash this rom thru odin will the triangle go away? odin or copy to sd card and flash via cwm?
or do i have to download kernel seperately also,..where do i find if yes?
thanks
Click to expand...
Click to collapse
i had the same problem after install CWM for first time in my phone, i solve this installing triangle away
TriangleAway v3.26
sorry for bad english
kimera_v4 said:
i had the same problem after install CWM for first time in my phone, i solve this installing triangle away
TriangleAway v3.26
sorry for bad english
Click to expand...
Click to collapse
HI KIMERA,
how do i install the apk when the handset is not booting beyond yellow traiangle at all
dheerpat said:
HI KIMERA,
how do i install the apk when the handset is not booting beyond yellow traiangle at all
Click to expand...
Click to collapse
hmm... your phone is soft bricked....flash the stock rom, root your phone, install and execute triangle away, this should fix your problem
sorry for bad english
If you still want to, you can remove this triangle. But it's not doing any harm, so you can leave it like it is. Just so you know.