I9100G Hang After Flashed fail - Android Q&A, Help & Troubleshooting

some one helps~~!!
I tried to flash my I9100G to Lite'ning ROM firmware 5.0, I using ODIN 1.85 to flash. Follow the step by step from xda recommanded.everything start smooth during start but it just show failed after all.
and my S2 is hang and show black scree..how can it recover? do I download another firmware to re-flash it again? any way to do factory recovery?
Please help!!!

no body helps??

the i9100G phone is incompatible with all international i9100 ROM's

which means my I9100G = brick? Any recovery method ? please help~~

Related

GS2 stuck at yellow triangle, cannot find appropriate CF-root kernel

Hi everyone,
First off I apologize if this is too stupid, but I am a complete newbie at this (yes, I watched the noob video before registering).
I rooted my galaxy s2 GT-I9100 using the Odin insecure kernel --> S2 root --> Odin secure kernel method. Then i installed CWM Rom manager. However it says that I do not have CWM Recovery on the phone, I cannot flash the ROM. So I downloaded recovery-clockwork-4.0.1.5-galaxys2.zip and flashed it to the phone using Odin. It shows PASSED but the phone was stuck at the boot-up screen with the yellow triangle.
I tried to flash the CF-root kernel onto the phone, which many said will solve the problem, however it seems the kernel for this phone "ZSLPE" is very rare (phone purchased in Hong Kong) and I cannot find anything with this particular kernel. Also, when I connect the phone via Odin and try to flash anything, it now gets stuck at "setting up connection", so i suppose even if i find the right kernel, it cannot be loaded onto the phone. Please help! I will be eternally grateful.
yellowtriangle said:
Hi everyone,
First off I apologize if this is too stupid, but I am a complete newbie at this (yes, I watched the noob video before registering).
I rooted my galaxy s2 GT-I9100 using the Odin insecure kernel --> S2 root --> Odin secure kernel method. Then i installed CWM Rom manager. However it says that I do not have CWM Recovery on the phone, I cannot flash the ROM. So I downloaded recovery-clockwork-4.0.1.5-galaxys2.zip and flashed it to the phone using Odin. It shows PASSED but the phone was stuck at the boot-up screen with the yellow triangle.
I tried to flash the CF-root kernel onto the phone, which many said will solve the problem, however it seems the kernel for this phone "ZSLPE" is very rare (phone purchased in Hong Kong) and I cannot find anything with this particular kernel. Also, when I connect the phone via Odin and try to flash anything, it now gets stuck at "setting up connection", so i suppose even if i find the right kernel, it cannot be loaded onto the phone. Please help! I will be eternally grateful.
Click to expand...
Click to collapse
Download .tar (Odin version) version of Siyah kernel here: www.gokhanmoral.com/gm/2012/07/29/siyahkernel-s2-v3-5/
Flash the kernel via Odin.
Ps: asking questions, or even searching could have saved you all these mess because, ROOTING ICS doesn't really require flashing any kernel unlike gingerbread.
Swyped from my Samsung Galaxy SII
yellowtriangle said:
Hi everyone,
First off I apologize if this is too stupid, but I am a complete newbie at this (yes, I watched the noob video before registering).
I rooted my galaxy s2 GT-I9100 using the Odin insecure kernel --> S2 root --> Odin secure kernel method. Then i installed CWM Rom manager. However it says that I do not have CWM Recovery on the phone, I cannot flash the ROM. So I downloaded recovery-clockwork-4.0.1.5-galaxys2.zip and flashed it to the phone using Odin. It shows PASSED but the phone was stuck at the boot-up screen with the yellow triangle.
I tried to flash the CF-root kernel onto the phone, which many said will solve the problem, however it seems the kernel for this phone "ZSLPE" is very rare (phone purchased in Hong Kong) and I cannot find anything with this particular kernel. Also, when I connect the phone via Odin and try to flash anything, it now gets stuck at "setting up connection", so i suppose even if i find the right kernel, it cannot be loaded onto the phone. Please help! I will be eternally grateful.
Click to expand...
Click to collapse
If you're on ICS you can flash siyah kernel for S2(the .tar file) and you'll get custom recovery and root at the same time. Kernel are usually universal you don't need to find the specific kernel for your rom. Only if you're using a 4.0.4 rom you have to use a 4.0.4 kernel same goes for the 4.0.3 because you're going to have bugs with the camera etc
duykhang524 said:
If you're on ICS you can flash siyah kernel for S2(the .tar file) and you'll get custom recovery and root at the same time. Kernel are usually universal you don't need to find the specific kernel for your rom. Only if you're using a 4.0.4 rom you have to use a 4.0.4 kernel same goes for the 4.0.3 because you're going to have bugs with the camera etc
Click to expand...
Click to collapse
Thanks a lot for the reply. I believe the phone was running on ICS 4.0.3. Can I still flash the Siyah kernel? Also it seems that when trying to flash anything with Odin, it gets stuck at "setting up connection" stage and does not proceed.
yellowtriangle said:
Thanks a lot for the reply. I believe the phone was running on ICS 4.0.3. Can I still flash the Siyah kernel? Also it seems that when trying to flash anything with Odin, it gets stuck at "setting up connection" stage and does not proceed.
Click to expand...
Click to collapse
Yeah. Flash the Siyah kernel.
Are you sure kies is not running?
Swyped from my Samsung Galaxy SII
Jokesy said:
Yeah. Flash the Siyah kernel.
Are you sure kies is not running?
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
I exited Kies, so yes I don't think it's running. Plus Odin was able to flash the CWM recovery onto the phone right before it got stuck at the yellow sign. After that it stopped working.
Should I flash the latest version of Siyah (v4.1.4) instead of the one you suggested?
Thanks again
yellowtriangle said:
I exited Kies, so yes I don't think it's running. Plus Odin was able to flash the CWM recovery onto the phone right before it got stuck at the yellow sign. After that it stopped working.
Should I flash the latest version of Siyah (v4.1.4) instead of the one you suggested?
Thanks again
Click to expand...
Click to collapse
Both should work, but i suggest you Flash mine.
Is Odin working now? If not reboot your Pc and try again
Swyped from my Samsung Galaxy SII
Jokesy said:
Both should work, but i suggest you Flash mine.
Is Odin working now? If not reboot your Pc and try again
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Thanks for all the help. The phone is now back and running. However there is now another problem. After I flashed CM10 jelly bean 4.1.1, Google Play has gone missing. The little shopping bag icon is no longer there and I cannot find it in the app list either. Any help?
yellowtriangle said:
Thanks for all the help. The phone is now back and running. However there is now another problem. After I flashed CM10 jelly bean 4.1.1, Google Play has gone missing. The little shopping bag icon is no longer there and I cannot find it in the app list either. Any help?
Click to expand...
Click to collapse
After you flashed CM10, you were suppose to flash gapps. So flash Gapps now

[Q] Help... Samsung Galaxt S11 GT-19100 in BOOtLOOP and stuck on the Galaxy screen

Hi Everybody,
Can you help me please, my wife phone SGS2, is stuck on the Galaxy start screen, it keep rebooting every few seconds and return to the same screen. I can get to the Download mode but cant get to recovery mode. I have tried to flash stock rom (I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5) and (I9100XWLP7_I9100OXELP7_I9100XXLPS_HOME.tar) and even the CM9 Resurrection editon (cm-9-20120420-ODIN-galaxys2.tar). I tried the instruction in these threads (http://forum.xda-developers.com/showthread.php?t=1457458) and (http://forum.xda-developers.com/showthread.php?t=1916331). I couldnt fully understand the instruction in this thread about the PIT file but tried to flash the stock PIT file for my device with the other modem, code, CSC files through ODIN. in all my trials through ODIN the process will finish and I will get the PASS result and then the phone will restart to the same Samsung galaxy screen. can you help me please.
Alsager said:
Hi Everybody,
Can you help me please, my wife phone SGS2, is stuck on the Galaxy start screen, it keep rebooting every few seconds and return to the same screen. I can get to the Download mode but cant get to recovery mode. I have tried to flash stock rom (I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5) and (I9100XWLP7_I9100OXELP7_I9100XXLPS_HOME.tar) and even the CM9 Resurrection editon (cm-9-20120420-ODIN-galaxys2.tar). I tried the instruction in these threads (http://forum.xda-developers.com/showthread.php?t=1457458) and (http://forum.xda-developers.com/showthread.php?t=1916331). I couldnt fully understand the instruction in this thread about the PIT file but tried to flash the stock PIT file for my device with the other modem, code, CSC files through ODIN. in all my trials through ODIN the process will finish and I will get the PASS result and then the phone will restart to the same Samsung galaxy screen. can you help me please.
Click to expand...
Click to collapse
Did you try flashing just the Siyah or Dorimanx kernel using Odin and get to CWM recovery? It had worked for me once. Once in CWM recovery, I flashed one of the ROMS I knew was working for me and got my phone working.
adityawagle said:
Did you try flashing just the Siyah or Dorimanx kernel using Odin and get to CWM recovery? It had worked for me once. Once in CWM recovery, I flashed one of the ROMS I knew was working for me and got my phone working.
Click to expand...
Click to collapse
I tried flashing the Dorimanx kernel, but still didn't boot into recovery, will try the Dotage kernel and let you know. Than
Sent from my HTC Sensation using xda app-developers app

i9100 stuck at samsung screen

hello there
i have i9100 it's stuck on samsung logo no matter what i do
i can access download mode but no recovery
tried flashing with mmc and without
with repartition and without
I9100JPKJ2_I9100OJPKJ1_I9100XXKI4_HOME.tar.md5 one file
i9100XXKH3 three files
I9100XWLSD_I9100OJVLS6_I9100XXLS8_HOME.tar.md5 one file
plz help
foxthemene said:
hello there
i have i9100 it's stuck on samsung logo no matter what i do
i can access download mode but no recovery
tried flashing with mmc and without
with repartition and without
I9100JPKJ2_I9100OJPKJ1_I9100XXKI4_HOME.tar.md5 one file
i9100XXKH3 three files
I9100XWLSD_I9100OJVLS6_I9100XXLS8_HOME.tar.md5 one file
plz help
Click to expand...
Click to collapse
Remove battery after 5,minutes put back again and press volume up+home+power button for 10sec it's give you recovery
If nothing help then flash another firmware via Odin
Sent from my GT-I9100 using xda premium
Why would you do the repartition flash?
I dunno what's with people and repartition, it's like once they see the option you can't look away.
I really don get the appeal.
Flash this:
http://www.sammobile.com/2012/11/15/i9100xxlsj-–-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/
That's:
PDA : LSJ
PHONE : LS6
CSC : LS1
Not the pit files...obviously.
While you download that try flashing siyah v6.
(You do have an I9100, don't ya?)
Sent from the little guy
i also tried cm9 resurrection but it didn't work
ill download that and let u know
it's i9100 and still not able to enter recovery
Alright, while you're downloading it try siyah v5 or v6 (tar versions via odin).
Sent from the little guy
flashed syah kernel and the mentioned firmware and still no use
What message is odin showing at this point?
Sent from...this is not even my S2
it always give success but the phone still doesn't boot and cannot access recovery
Here's the thing, if odin passes your on the safe side.
Are you 100% sure it's an I9100?
Where are you getting stucked upon boot?
Sent from the little guy
yes am 100% sure
on samsung 1st logo samsung galaxy s2
foxthemene said:
yes am 100% sure
on samsung 1st logo samsung galaxy s2
Click to expand...
Click to collapse
While during 'ODIN' flash do u see the 'Blue Progress bar' on ur phone screen for now

[Q] flashed s2 gt i-9100 with i-9100g Custom ROM; Bricked my phone! :-|

Hi
I can't possibly state how foolish I feel right now, but I accidently flashed my Samsung Galaxy S2 I-9100 with a Custom ROM made for the I-9100G version. As a result my phone is now only able to reach the Download mode; not even recovery mode. However on connecting with Odin the test is repeatedly FAILED. I am now left with a stuck phone which when tried to be powered up is always stuck in an incomplete boot cycle. Do we have any suggestions / ways to get this corrected, or do I have to order a new phone!??
Please help...
Thanks!
narayanan.n010 said:
Hi
I can't possibly state how foolish I feel right now, but I accidently flashed my Samsung Galaxy S2 I-9100 with a Custom ROM made for the I-9100G version. As a result my phone is now only able to reach the Download mode; not even recovery mode. However on connecting with Odin the test is repeatedly FAILED. I am now left with a stuck phone which when tried to be powered up is always stuck in an incomplete boot cycle. Do we have any suggestions / ways to get this corrected, or do I have to order a new phone!??
Please help...
Thanks!
Click to expand...
Click to collapse
Have you tried re-partitioning your phone yet with ODIN?
gsstudios said:
Have you tried re-partitioning your phone yet with ODIN?
Click to expand...
Click to collapse
Not yet. I may actually be a perfect example of one who should NOT try rooting..complete newbie in this world!!
In case you have any suggestions how to go about doing that please do share the same.
I took a backup of the stock ROM using Nandroid and had TWRM installed.
Of course, these are of no use until I'm at least able to reach the recovery mode!!
Have a look at my guide here on how to use the pit files: http://forum.xda-developers.com/gal...ivatives/mod-increase-partition-size-t3011162
Download the stock pit file
Download the official stock firmware
Flash both in ODIN (tick repartition and make sure you have selected the pit file and the stock rom to flash)
Start the flashing process

GT-i9100 displaying a yellow triangle with exclamation + mobile and computer icon

Hi I am Ali. I had a galaxy s2 gt- i9100 which i updated through odin using a stock firmwaire i downloaded from sammobile. So my firend ask me to do thesame with his. When i try using thesame rom with odin it failed and the phone displayed a yellow triangle with an exclamation + mobile and computer icon. Then i flashed a siyah 4.0.1 kernel it came on anfd just stopped at the boot logo. Now i don't know what to do. I am confuse. Please i need help
Download a stockrom for your model again, and flash it with odin, dont flash custom rom untill you finish booting the stockrom first time.
Reflashing gt i9100 with new rom
I Downloaded a new rom today this morning android 4.0.3 and still can't flash it with odin. Should i download and flash it with the rom which already there in the phone before i try updating it?

Categories

Resources