Can't activate through ting - Sprint HTC One (M9)

I installed a non cdma rom it would only boot into bootloader. I then installed crDroid and it worked but I wasn't feeling it so I installed BadBoyz rom. Forgot to wipe before flash got stuck in a boot loop. Wiped and flashed badboyz again. Rom works but no txt/phone calls. Ting said that I'd have to put the stock rom on. Installed the new sprint RUU which is what is on it now. ##72786# didn't work. Tried ##298606# but it didn't bring up a menu. I have internet but no txts or calls. Ting said I might need to figure out how to change the APN. I'm freaking out and need help.

Related

Sprint TP flashed to metro, phone stopped working when flashed to stock rom

Hi,
I got my sprint touch pro flashed to metro pcs, then I flashed it to mighty rom 6, and it was working all good for a long while. After I saw all these new roms coming out, with newer manila I decided to flash a new rom, and I read that it is better if I flash the stock rom before flashing to a custom rom, and so I did. After I flashed to the stock shipped sprint rom the phone stopped working, and after I flashed the custom rom, nfsfans B14 rom, the phone still doesn't work (I can't call or receive calls). I have installed the carrier cab for metro pcs, but it doesn't work, and anyways, as far as I know it only takes care of the internet, right?
Did I break the phone, or can I do something in service mode? Do I need to get it flashed again?
Please, any help would be greatly appreciated.
Thank You!
In case somebody would fall into the same situation, I had to get Metro PCS' PRL file which I had to update in ##778# settings, and now it all works fine

[Q] CM9 Activation

So... I can't get my phone to activate on CM9 beta 0.3.3. Now, before you say anything, I have tried restoring by backup I made of stock before flashing the rom for the first time, activating, and then flashing CM9, but when I boot after flashing, the device is not activated anymore. Is there a step that I am missing, or does my phone just dislike me?
Thanks for any help in advance.
It's fixed. I restored back to stock, activated, wiped, flashed 0.3.1, checked for activation, flashed 0.3.2, check for activation, flashed 0.3.3, and it was still activated. Kind of a long process... but whatever works.

Stuck on 3G

Recently replaced my Rezound with a used one; S-Off'd, flashed Amon Ra and CM10.1. Noticed this morning I was only getting 3G. Thought it might have been a software issue so I toggled network modes a few times, it didn't help. Wiped and reflashed, didn't help. Wiped again and installed a stock based ROM, didn't help. Flashed the new firmware and radios (again), didn't help. I know for a fact that LTE does work on this phone; I activated it before I started the software mods. 4G is working fine on my old Rezound (and my government issued Razr M) so it's not a network issue.
Help would be greatly appreciated...I'm about to call Verizon on my wife's phone and make sure that this one was properly activated (I punched in the ESN on Verizon's site).
socal87 said:
Recently replaced my Rezound with a used one; S-Off'd, flashed Amon Ra and CM10.1. Noticed this morning I was only getting 3G. Thought it might have been a software issue so I toggled network modes a few times, it didn't help. Wiped and reflashed, didn't help. Wiped again and installed a stock based ROM, didn't help. Flashed the new firmware and radios (again), didn't help. I know for a fact that LTE does work on this phone; I activated it before I started the software mods. 4G is working fine on my old Rezound (and my government issued Razr M) so it's not a network issue.
Help would be greatly appreciated...I'm about to call Verizon on my wife's phone and make sure that this one was properly activated (I punched in the ESN on Verizon's site).
Click to expand...
Click to collapse
Make sure LTE/CDMA is selected in network options. If they are. You probably need to flash stock recovery and do a factory reset inside of HBOOT.
Flyhalf205 said:
Make sure LTE/CDMA is selected in network options. If they are. You probably need to flash stock recovery and do a factory reset inside of HBOOT.
Click to expand...
Click to collapse
Factory reset after RUU worked. Thanks man.

I think I borked my phone...

So...I was on CM10.2 and decided to try out Carbon. I used the latest TWRP recovery, wiped everything, and installed. I then installed the custom gapps, then got careless and installed the other .zips on the custom gapps page. I wasn't paying attention and thought they were required.
I'm S-ON so I did the fastboot flash boot boot.img from the boot.img in the Carbon zip.
ROM worked great, though, I was at home and had the wifi connected. I guess I didn't realize that the mobile data wan't working.
I noticed it yesterday at work and thought it might be a ROM problem. So, followed the process above and installed the 4.3 version of LiquidSmooth, Paranoid, and finally Revolt.
I couldn't get my mobile data to come on to save my life.
So, I just relocked it and RUU'ed with rezound_AndroidPolice_4.03.605.2_PH98IMG.zip (I had used this once before and it worked, before re-unlocking and playing with various roms)
I make it through all of the setup...still no mobile. The notifications bar *shows* three bars, but, the Mobile Network entry in Settings says "Turning on"
I've even tried a factory reset...everything on the phone works except the mobile network.
Anything else I can try?
greenhead916 said:
So...I was on CM10.2 and decided to try out Carbon. I used the latest TWRP recovery, wiped everything, and installed. I then installed the custom gapps, then got careless and installed the other .zips on the custom gapps page. I wasn't paying attention and thought they were required.
I'm S-ON so I did the fastboot flash boot boot.img from the boot.img in the Carbon zip.
ROM worked great, though, I was at home and had the wifi connected. I guess I didn't realize that the mobile data wan't working.
I noticed it yesterday at work and thought it might be a ROM problem. So, followed the process above and installed the 4.3 version of LiquidSmooth, Paranoid, and finally Revolt.
I couldn't get my mobile data to come on to save my life.
So, I just relocked it and RUU'ed with rezound_AndroidPolice_4.03.605.2_PH98IMG.zip (I had used this once before and it worked, before re-unlocking and playing with various roms)
I make it through all of the setup...still no mobile. The notifications bar *shows* three bars, but, the Mobile Network entry in Settings says "Turning on"
I've even tried a factory reset...everything on the phone works except the mobile network.
Anything else I can try?
Click to expand...
Click to collapse
check you sim card. i might be a goner. you can take it to vzw and they will issue a new card.
EDIT:
if you are on the stock rom could try this. pull the sim out, boot the phone. it will give you a sim error. turn off the phone and place sim back in

[Q] Phone requires activation a few hours after installing CM10.2

I went from stock to rooted, TWRP, S-off, CM 10.2. The first time I tried it, the phone immediately required activation. So I went back to a stock rooted ROM performed the activation and then went back to CM 10.2. I tested calling, Data, and text everything worked. 2 hours later I tried to place a call and the phone wanted to be activated again. Everything I've found referring to this issue says going back to stock and activating before flashing the ROM fixes this problem. Any ideas?

Categories

Resources