I own a old galaxy tab 10.1 that's doing nothing in my bottom drawer. So I thought let's get some use out of it by making it the music and gps in my car.
When I plug it into my usb car charger, I get the red x and it doesn't seem to charge. Can someone tell me what I need to be able to charge the tablet while running music and GPS in my car?
Will this work?
http://www.amazon.com/gp/product/B0...=QZZM8W8MDZZ3RXK3YA1G&ref_=pd_lutyp_cxhsh_2_1
Will I need anything else? maybe this?
http://www.amazon.com/Air4tech-Samsung-Charging-Accessories-Guarantee/dp/B00EIKHJAW
Any clarification as to what I need is appreciated.. Thanks!
The red x means it isn't charging. Best way is root it and install a custom ROM or kernel to avoid this problem. Otherwise you'll have to use the official charger and a 12v-220v converter...
My plan was to root so that I could run all apps in the dual view mode. So rooting it will also allow the device to charge with car charger (using the OEM cable, but 2.1a usb car charger)?
Rooting alone won't help. A custom ROM or kernel will.
Related
Hey everyone,
I'm having problems when connecting the thunderbolt to my Sony usb stereo. It asks me what I want to do and I choose charge only but it doesn't charge.
I use to have the Droid X and it worked fine on the stereo.
Anyone having the same problem?
Any hints or tips for this?
Sent from the Thunderbolt using Tapatalk
Your deck usb port might not provide enough power for the thunderbolt...but might have for the droid x. The usb addon for my pioneer never worked for charging when I had it installed. Just read flash dives, but that's just my two cents on the problem...could be something else.
Sent from my ADR6400L using XDA App
I know some devices (like my Motorola dumb phone) will not charge over generic USB power (power and ground only), but if you use a USB "Data blocker" (grounded data pins) some of them will charge. This may be the same way... or it could be the whole requires more than just 5V to initiate charge without detecting data (meaning a PC connection).
You could try placing some MP3s on your SD card and tell your radio to "play" the usb drive and set the phone to automatically mount as a drive. That may do it, if not, look into the grounded out USB cable.
I just installed a lighter receptacle behind the stereo and ran up a car charger (not a usb charger) through the back of the dash to the car dock.
I was able to get the phone to charge via the USB port on my kenwood deck, but it was USB power, and discharged faster than it could charge.
It now reports charging AC, and charges normally. Cost $6 at radio shack.
I just tapped into the positive and negative wires that were already going to the original 12v lighter.
I'm actually having a reverse problem. My phone charges in my car stereo's USB slot, but the receiver doesn't recognize it as a USB drive. The phone doesn't even notice there's a USB connection, even though it's charging.
Oh well. It has AUX too so, no problem really.
craighwk said:
I'm actually having a reverse problem. My phone charges in my car stereo's USB slot, but the receiver doesn't recognize it as a USB drive. The phone doesn't even notice there's a USB connection, even though it's charging.
Oh well. It has AUX too so, no problem really.
Click to expand...
Click to collapse
I have the same problem, but I suspect that's because of that stupid "Verizon Mobile" virtual CD on the phone. I bet that's what your deck sees and can't find any music.
If anyone knows how to get rid of that partition without rooting the phone, I'd like to know.
In my case I have to use the Bluetooth connection. That works, but it doesn't give me the song information on the deck. Might have to revert to an old iPod for our music in the car.
DJ_Colo said:
I have the same problem, but I suspect that's because of that stupid "Verizon Mobile" virtual CD on the phone. I bet that's what your deck sees and can't find any music.
If anyone knows how to get rid of that partition without rooting the phone, I'd like to know.
In my case I have to use the Bluetooth connection. That works, but it doesn't give me the song information on the deck. Might have to revert to an old iPod for our music in the car.
Click to expand...
Click to collapse
With my old Incredible, my car stereo acted differently. It would see the phone and the phone would ask me to go into disk mode. After a few moments of scanning, the receiver would say "Invalid Media". I was also on CM7 for a little and I was actually able to get the receiver to play music thought it.
It's a Pioneer DVD player.. Unfortunately with the Thunderbolt, it doesn't do any of the abolve. It just says "No Device" and the phone doesn't even do anything except charge. Doesn't ask me to mount.
Okay I found a solution. I believe the problem was the Verizon crap that ran when plugged in. I installed The Perfect Storm Rom and now its charging fine.
Sent from my ADR6400L using Tapatalk
Hi all
I have a standard Samsung Galaxy SIII I9300. It is not rooted and I don't see the point in rooting it,as it is quick, reliable and if I'm not fooling around with it all day, the battery can last up to 2 days!!
But there is one thing I'd like to know how to do, if it is possible to do.
I want to be able to play music and alarm sounds through the micro USB port when the USB cable is connected instead of only through the 3.5mm jack.
I am going to be building a dock station with built in speakers. The Micro USB cable will charge the phone and the data wires will go to the speaker.
Will this work?
And if not, how can I make it work?
Hi All,
I was wondering if anyone had any insights in to this problem I have been having.
Briefly, I have the 4g lte verion on EE's new network. I purchased the official MHL/HDMI adapter which works fine and the video is outputed to my sammy 50inch tv fine. The issue I have is the battery drains while doing so. I belive this may to due to the phone outputting more than it is drawing from the power source. Any thoughts ?
I spoke with Samsung tech and they said a number of people have started to report this issue and they are currently testing/investigating. If this is indeed the case seems a pointless acessory as a long video would possibly drain the whole battery, Im yet to test the full drain time.
Secondly, with a 3rd party docking cradle with spare battery slot which purchased from amazon (http://www.amazon.co.uk/eLifeStore®-Samsung-Desktop-Charger-Docking/dp/B008PPRGFY) also does not charge phone properly. Even with the orignial charger in the ac port (or usb port) . The phone reports as charging but stays the same or decreases. Charged directly from the socket it is fine. Strange!
Any help or thoughts would be greatly appreciated.
Thanks
Ian
It's common. Mine did that too! I switched to my old S2 charger, problem solved
Thanks Ill try that out, any idea why that works ?
lawboffin said:
Thanks Ill try that out, any idea why that works ?
Click to expand...
Click to collapse
No idea man? A design fault maybe? All I know is that my phone took for f#*%ing ever to charge with the USB type wall charger. I pulled it out of the socket and plugged my other other one in that was sitting right next to it and it started charging? Checked a few minutes later and it had climbed considerably so I pulled the USB cable out of the new plug and kicked it under the bed where it now lays resting not to be used again LOL.
USB plug/cord works perfectly fine? So I use it on the computer. My laptop even charges the phone via the USB cable faster than the socket plug (which is usually the opposite - as I am sure we are all aware). So yeah I would say poor design or defective wall plug or both or something? Wasn't going to send my phone back because of it. 2second decision problem solved Samsung phone is great!
Im having exactly the same problem.
I have an s3 on orange and have the same mhl adapter conected to my tv.
I have tried the charger from my s3 which does says its charging when I connect my phone but only for about a minute so I also tried using the charger from my s2 and that just does exactly the same.
An easier way is to buy the official allshare dongle for your hdtv then you can stream anything from your phones screen direct to your tv and can have the phone on charge via pc or wall socket at the same time,
Hope this helps
i suggest you throw away your original charger (slow charge) and its usb cable (loose - actually caused the extsd to become damaged to the point i had to repartition) and buy yourself a cheap usb cable for data (£2) and a 3rd party charger (pref not a usb adapter one - £5) and all should be fine!
I still experienced a small battery drain while using the mhl adapter, however, i froze a few apps with titianuim (ones i know run all the time like utter and tasker, paragon ntfs, easy ums, directory bind etc), and put it on min brightness - works like a charm. I know its a effort freezing apps but does the trick with my phone... Since finding that out i actually keep paragon & easy ums frozen till i need them...
just a few thoughts for you....
this is my work ... whit TAB 8.4 !!!
installed in my Audi A6 and connected to the car radio SONY REMOTE APP.
Slot car with homebuilt electric motor to eject the tablet !!
Fit in dual din
http://www.youtube.com/watch?v=kaRtDMauLQM
Very nice, just please don't watch movies while driving.
Nice! I want to do this in my 06 gti with some sort of custom fabricated float mount. Does your car use can bus?
Sent from my SM-T320 using Tapatalk
I removed the car stereo and just installed a radio sony bluetooth in the glove box.
I used the original system already complete amplifier.
I connected the outputs radio connector at busquadra connector AUDI!
looks fine...
mannyy said:
I removed the car stereo and just installed a radio sony bluetooth in the glove box.
I used the original system already complete amplifier.
I connected the outputs radio connector at busquadra connector AUDI!
Click to expand...
Click to collapse
Its cool. I'm testing same setup have u had any problems with auto connect bluetooth?
Not problem. . But I need push a sony radio for connection bluetooth App remote. .
I have call a Sony for this .. but need manual input..
Any one interested in this check out proclips (Google them). A non invasive easy way to install a tablet in the car. Works great with the Ford Sync system but anything with Bluetooth would be good. I've had iPad's, Note tabs, and now the 8.4 in my Fusion.
8.4 in my Jeep
Here's my setup in my Jeep. I got a custom mount that sits over the stock stereo. It slides in an out and locks. When I want it more secure, I slide it out and I have a lock box below my seat.
I ordered a ground loop adaptor to fix the hum when it's being charged and plugged into AUX. I'm currently shopping for a DAC that I can connect to a charge enabled OTG cable. The best I've seen is LAVA SimulCharge USB 1 but I wish it had more ports. Anyone find anything better?
TheBlueDuck said:
Here's my setup in my Jeep. I got a custom mount that sits over the stock stereo. It slides in an out and locks. When I want it more secure, I slide it out and I have a lock box below my seat.
I ordered a ground loop adaptor to fix the hum when it's being charged and plugged into AUX. I'm currently shopping for a DAC that I can connect to a charge enabled OTG cable. The best I've seen is LAVA SimulCharge USB 1 but I wish it had more ports. Anyone find anything better?
Click to expand...
Click to collapse
I have the lava adapter works pretty good. U can buy a 1 male to 3 female USB adapter for more ports. Make sure u have a good 2.1 amp charger and cable for the lava or it won't charge to good. I use a official Samsung car charger and the USB cable that came with the tab pro gets about 1000ma with my DAC hooked up. I use the Behringer uac 202 USB dac best for the money. Has optical also.. No ground loops or noise with optical.
b3ltazar said:
I have the lava adapter works pretty good. U can buy a 1 male to 3 female USB adapter for more ports. Make sure u have a good 2.1 amp charger and cable for the lava or it won't charge to good. I use a official Samsung car charger and the USB cable that came with the tab pro gets about 1000ma with my DAC hooked up. I use the Behringer uac 202 USB dac best for the money. Has optical also.. No ground loops or noise with optical.
Click to expand...
Click to collapse
Thanks. I was hoping I could get a 1/3 USB adaptor for more ports, but I didnt know if it would work. I have a two different 2.1 amp chargers now, and it barely gives any juice to it. It says max 1200 or so but it bare;y gets 3-400. It keeps the screen on and it drops a % every 5-10 min. I looked at the Behringer uac 202 but I'm connecting to a stock deck that goes have RGA inputs so I'm going in through an AUX jack. I could try an optical to headphone cable I suppose.
The ground loop cable I got killed the hissing noise. Is the UAC 202 a noticeable difference worth the extra cost and time setting it up? I'm concerned it will slow down charging even more. Does it suck up a lot of juice?
The sound difference is huge with the 202 dac even if u use the headphone out jack. Alot more clarity and output. doesn't suck much juice at all. U should invest in a Samsung Branded car charger most chargers say 2.1 amps but put out half.
Thanks, I just purchased the 202 and the lava so I'll be able to test this out this weekend.
I couldnt find the general samsung car charger that didn't have a cord already attached though.
Now I just need to find a USB backup camera solution and my car setup will finally be complete.
TheBlueDuck said:
Thanks, I just purchased the 202 and the lava so I'll be able to test this out this weekend.
I couldnt find the general samsung car charger that didn't have a cord already attached though.
Now I just need to find a USB backup camera solution and my car setup will finally be complete.
Click to expand...
Click to collapse
Lava just came out with the 3 port looks very nice.. ordered one will let u know how it works.
b3ltazar said:
Lava just came out with the 3 port looks very nice.. ordered one will let u know how it works.
Click to expand...
Click to collapse
Goodluck. The 3 port one looks pretty large. Does that function differently than if we were to buy a 1 to 3 USB adaptor?
I have my 1 port working correctly. Strangely whenever I use the Lava adaptor it lists it as 100% charges right away, but if I unplug the charger it drops back down to whatever it really is. Not a huge deal, but annoying to not see the accurate battery level when plugged in.
The 3 port adapter is supposed to be better with charging and has a button for charge only wich is cool. And according to lava there is no power feedback from the tablet to the the adapter. The tablet port keeps my usb dac on even when I unplug power With the one port. And I'm sure that the 3 port will have no problem with a dac hard drive and mouse (hopefully will let everyone know when I get it in a week or so).the one port would have a power supply issue with all 3 devices.
Hi guys, I have a problem with my Asus Z380KL tablet. Im want to use this tablet as a head unit in my car and I need to use OTG cable to make it work, also I need to have charging in the same time. I also want to use AutoMate app to control tablet, especially auto on/off while charging/not charging.
And now is the problem, I can easily achieve working external devices (usb dac, FM transmitter and pendrive) with charging in the same time, problem is when I cut off the power from charger tablet still thinks that is charging, of course it cant be cause there is no power source but still I can see charging icon and in settings showing that is still charging. It stop doing that when I unplug micro usb plug from tablet but obviously I cant do it all the time cause tablet will be build in dashboard.
Now, with normal charger, without OTG cable its working perfectly, when I cut off power it stops charging in the same time, also I tried couple OTG cables and on every single one is the same thing.
Any ideas guys how I can fix that? Im not sure if thats software of hardware problem.
Also device is not rooted and it has ASUS oem software with Android 6.0.1.
Thanks guys for your answers and your time! Cheers
Up
Really nobody knows what could be a problem?