Related
Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
ANYONE?
goophone v88 i5 from dhgate seller name shenzhen
Hey my phone is goophone i5 v88 i5 I brought from dhgate seller nane is shenzhen iam also trying to bypass cwm recovery but no sucess when flashing thrpugh mut and the reebooting to recovery blank display I think the processor is mt6577 dual core ram is 512 mb and screen resolution is 480*854 but with a yweaked stock kernel the system show fake hardware like 2gb ram higher screen resolution and so more but the phone rxactly looks and feels like iphpne 5 and about the software running on this phone I thing it is tje bugg free and coolest full ios6 themed rom
cj27282 said:
Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
Click to expand...
Click to collapse
Same here....unable to enter recovery mode after flashing CWM ...phone works but it "skips'" the recoverymode...factory mode works but yee...some solution for this would be nice......atleast i can still use the phone...altho with the stock rom witch is crap cause i cant back it up for flashing the phone...
cj27282 said:
Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
Click to expand...
Click to collapse
Any progress?
cj27282 said:
Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
Click to expand...
Click to collapse
Ok so problem solved.... unfortunately it will delete everything on your phone....i simply flashed the phone using SP-Flashtool and a rom from here => http://pan.baidu.com/share/link?shareid=324294&uk=540296524#dir/path=/Rom/Goophone I5 Rom supplyed by Zap ...
its the version v18 ... theres a v22 also you can download from http://pan.baidu.com/share/link?shareid=412131&uk=3022339290 but i havent tryed it yet so i dont know how well it works....
can you see what version your stock rom is? ... i think mine was 27 but im not 100% and i have been looking for a later version stock rom but i havent found any yet.....so yee.... the rom i installed now semes to be pretty much the same although it gave me lower antutu scores than the first one i had...dunno how mush that has to do with the software.... but userwise i havent noticed any major differance more than the charging animation thats different when the phone is switched of..and yes the system recovery 3e is in english
now ofcourse these roms are for the Fastcardtech Goophone I5 N2 micro simcard!!!
all is done at your own risk!!
also you HAVE TO INSTALL the mtk6577 VCOM driver in order to be able to use the sp.flastool correctly.....anything else might **** up your phone.... theres a good tutorial here http://forum.xda-developers.com/showthread.php?t=2206421
good luck and please post what stock version you have running now!! and if the phone is running fine otherwise maybe you want to reconsider flashing it since the versions i posted for download are v18 and v22....would love to get my hands on the newest stock rom...(did try to just flash the recovery image from the v18 but it bricked my phone)
jinishpv said:
Hey my phone is goophone i5 v88 i5 I brought from dhgate seller nane is shenzhen iam also trying to bypass cwm recovery but no sucess when flashing thrpugh mut and the reebooting to recovery blank display I think the processor is mt6577 dual core ram is 512 mb and screen resolution is 480*854 but with a yweaked stock kernel the system show fake hardware like 2gb ram higher screen resolution and so more but the phone rxactly looks and feels like iphpne 5 and about the software running on this phone I thing it is tje bugg free and coolest full ios6 themed rom
Click to expand...
Click to collapse
Hello,
About that phone, i buyed that phone, from the same seller, yesterday.
It is fake?Its not the actual goophone i5s that we see on their website?
Thanks!
i have the goophone i5 mt6577 with bee on the back cover
i can have the original recovery image recovery E3?
i wanto to turn back to original factory rom but my older backup don't recognize from colonelzap's cmw recovery
thank you
luponero76 said:
i have the goophone i5 mt6577 with bee on the back cover
i can have the original recovery image recovery E3?
i wanto to turn back to original factory rom but my older backup don't recognize from colonelzap's cmw recovery
thank you
Click to expand...
Click to collapse
did you flash the colonelzap recovery with flashtool??
if your colonelzap cwm works then you should back up your rom with cwm...
(I have not tryed it my self but i think it should work)
download this rom
http://pan.baidu.com/share/link?shareid=412128&uk=3022339290
uncompress and youl find a file called RECOVERY.IMG.....
now open your flashtool (i use sp-flashtool) and load the scatterfile "MT6577_Android_scatter_emmc.txt"
the flash tool is gonna show you a list with all the files that where in the zip..
uncheck all of them so the only one that is checkes is the RECOVERY.IMG ....and then you flash and TADA.....you should have your old S3 recovery back
if it all goes to **** you can just flash the complete rom and it will work.. .....atleast if you have the gooptone i5 n2/lte mtk6577
dont use mobile uncle for these files...that screwed up my phone....they need to be flashed to the phone!!
AND... this is the international v18 rom... dont know what version you have right now....but if you manage to make a back up rom of your phone PLEASE SHARE!!! .... ive been looking for the later international rom....and if you have the backup you can allways upgrade from the v18....so
GOOD LUCK!! ...keep us posted! ...and if you need more flashingdeetales you can just google or ask
CWM Goophone i5 N2 black screen
Hi , I have similar issue like this ...
I have Goophone i5 N2 from aliexpres.com
It's come with original ROM and with Root, unfortunately it has lot of bugs . So I would like to install custom ROM from Colonelzap.blogspot
I spent more then 2 days with trying to flash Clock work recovery mode . So I'll be able to flash new ROM. But there I'm stuck
I red several tutorial for instalation , I did go trough threads here on forum , etc but still without any success .
1, I tried to use MobileUncle MTK for set recovery image with image from colonel zap blog
2, I tried to use (maybe 10 different version of) SP Flash Tool and still got 2 issue (4050 or 8038) during flashing
I used recovery image from Greg's Mobile gadgets
And result is still same , When I try to load to recovery mode , I still got black screen only .. And I have to restart mobile again , then it start up normally ...
I'm starting to be little bit desperate
I'll really appreciate any help or advice
PS: because forum rules , I can't add any links to sources which I used .. But I'll response very fast for any questions. Thanks
Dude!! u gotta make sure u have the MTK Vcom drivers installed on your computer......when u got that its easy peasy..... make sure your phone us turbned of and DISSCONNECTED from the coputer... now in SPflashtool you load the rom that u wanna flash and you press the transfer button....when thats done the computer is gonna start looking for the phone.....this is the moment you connect your phone to the computer....otherwise it wont work...windows will start looking for som other crap driver to use with your phone.......
if u wanna get ur phone to work well you should go to the talkingmobi blog and download the stock rom and flash that one....then when thats done flash the CMW and throu that u put in the manuxo rom!!......thats more or less what ive done...altho i made my own rom...but its more or less the same as manuxos just with less chinese crap...but that u can do your self when u got the phone set up...easyest way i think is with "root app remover" that u can get for free from the app store...or "Playstore" to be precise... good luck!!
ja.viper said:
Hi , I have similar issue like this ...
I have Goophone i5 N2 from aliexpres.com
It's come with original ROM and with Root, unfortunately it has lot of bugs . So I would like to install custom ROM from Colonelzap.blogspot
I spent more then 2 days with trying to flash Clock work recovery mode . So I'll be able to flash new ROM. But there I'm stuck
I red several tutorial for instalation , I did go trough threads here on forum , etc but still without any success .
1, I tried to use MobileUncle MTK for set recovery image with image from colonel zap blog
2, I tried to use (maybe 10 different version of) SP Flash Tool and still got 2 issue (4050 or 8038) during flashing
I used recovery image from Greg's Mobile gadgets
And result is still same , When I try to load to recovery mode , I still got black screen only .. And I have to restart mobile again , then it start up normally ...
I'm starting to be little bit desperate
I'll really appreciate any help or advice
PS: because forum rules , I can't add any links to sources which I used .. But I'll response very fast for any questions. Thanks
Click to expand...
Click to collapse
virre62 said:
Dude!! u gotta make sure u have the MTK Vcom drivers installed on your computer......when u got that its easy peasy..... make sure your phone us turbned of and DISSCONNECTED from the coputer... now in SPflashtool you load the rom that u wanna flash and you press the transfer button....when thats done the computer is gonna start looking for the phone.....this is the moment you connect your phone to the computer....otherwise it wont work...windows will start looking for som other crap driver to use with your phone.......
if u wanna get ur phone to work well you should go to the talkingmobi blog and download the stock rom and flash that one....then when thats done flash the CMW and throu that u put in the manuxo rom!!......thats more or less what ive done...altho i made my own rom...but its more or less the same as manuxos just with less chinese crap...but that u can do your self when u got the phone set up...easyest way i think is with "root app remover" that u can get for free from the app store...or "Playstore" to be precise... good luck!!
Click to expand...
Click to collapse
Hi ,
I did this , several times . I installed correct Vcom driver, and update to last version . And I did follow steps for SP Flash tools. And i can see for aprox 2 sec , load driver for Vcom for Mediatek and So I think , that this part I made correctly.
When I tried load scattle file in to SP flash tool , and then run download and after that I connect switch off phone via cable .
SP FT find mobile via Vcom , and start upload and I see red progress bar on 100 and then after couple seconds I got error message :
1 , sometimes : BROM ERROR: S_FT_NEED_DOWNLOAD_ALL_FAIL (4050) ...
2, or : SP Flash Tool error 8038
ohh yee... ive had that aswell when i flashed the ladies n9589.....thats either due to a bad rom...maybe some error when you downloaded it OR ande most probably an incompatible version of SPFlashtool.... sometimes you have to try diffrent versions to get it to work on your specific phone... if u got the goophone i5 n2/LTE then you should try "SP_Flash_Tool_v3.1224.01"...
Thats the one i use for flashing my goophone and it works just fine.....and when you flash the CWM you should first boot up the phone with the latest rom you flashed b4 cause if you flash on an unbooted rom it wil most probably brick your phone so u gotta do the complete romflash from scratch....remember most costum roms are basically like "CWMbackups" that people do on their modifyed roms and spread....so with spflashtool you allways need to start with a propper rom with scatterfile....but ye....try running annother version of spflashtool... like the one i wrote in top...works for me ...and u can find it on goolgle
ja.viper said:
Hi ,
I did this , several times . I installed correct Vcom driver, and update to last version . And I did follow steps for SP Flash tools. And i can see for aprox 2 sec , load driver for Vcom for Mediatek and So I think , that this part I made correctly.
When I tried load scattle file in to SP flash tool , and then run download and after that I connect switch off phone via cable .
SP FT find mobile via Vcom , and start upload and I see red progress bar on 100 and then after couple seconds I got error message :
1 , sometimes : BROM ERROR: S_FT_NEED_DOWNLOAD_ALL_FAIL (4050) ...
2, or : SP Flash Tool error 8038
Click to expand...
Click to collapse
virre62 said:
ohh yee... ive had that aswell when i flashed the ladies n9589.....thats either due to a bad rom...maybe some error when you downloaded it OR ande most probably an incompatible version of SPFlashtool.... sometimes you have to try diffrent versions to get it to work on your specific phone... if u got the goophone i5 n2/LTE then you should try "SP_Flash_Tool_v3.1224.01"...
Thats the one i use for flashing my goophone and it works just fine.....and when you flash the CWM you should first boot up the phone with the latest rom you flashed b4 cause if you flash on an unbooted rom it wil most probably brick your phone so u gotta do the complete romflash from scratch....remember most costum roms are basically like "CWMbackups" that people do on their modifyed roms and spread....so with spflashtool you allways need to start with a propper rom with scatterfile....but ye....try running annother version of spflashtool... like the one i wrote in top...works for me ...and u can find it on goolgle
Click to expand...
Click to collapse
I used your suggested version of SP_Flash_Tool_v3.1224.01 and I used 2 different recovery.img , but in both tries i got same error as you can see on image
So i tried to upload new rom .
And it's look like a made a brick from this ... Now it doesn't respond at all ... SP flash tool doesn't recognize mobile at all
I can't connect now to the SP flash tool , it's just dont recognize phone , I can see only in device manager , which see 2 cards
and when I connect phone I can see for a moment USB Vcom port driver in list and for 1 second I can see that it write
Code:
Device is work properly
and then is change to image
Code:
Currently, this hardware device is not connected to the computer. (Code 45)
To fix this problem, reconnect this hardware device to the computer.
Do you have the ADB drivers installed on your computer? .... might be there where your problem is.....or annother conflicting driver on your computer....google the forums for ADB driver MTK Vcom driver install.... as i get it the computer wont know how to talk linux without the ADB pack.......i think its included in some vcom driver packs but i do believe i had to install that separatly the first time.....check that out...cause it should work.....if now try it with annother computer...could be some crap driver on your computer messing it up...i had an emulator at one point messing my spflashtool up....
ja.viper said:
So i tried to upload new rom .
And it's look like a made a brick from this ... Now it doesn't respond at all ... SP flash tool doesn't recognize mobile at all
I can't connect now to the SP flash tool , it's just dont recognize phone , I can see only in device manager , which see 2 cards
and when I connect phone I can see for a moment USB Vcom port driver in list and for 1 second I can see that it write
Code:
Device is work properly
and then is change to image
Code:
Currently, this hardware device is not connected to the computer. (Code 45)
To fix this problem, reconnect this hardware device to the computer.
Click to expand...
Click to collapse
stock ROM goophone-i5-0428-f-yzs.zip
virre62 said:
Do you have the ADB drivers installed on your computer? .... might be there where your problem is.....or annother conflicting driver on your computer....google the forums for ADB driver MTK Vcom driver install.... as i get it the computer wont know how to talk linux without the ADB pack.......i think its included in some vcom driver packs but i do believe i had to install that separatly the first time.....check that out...cause it should work.....if now try it with annother computer...could be some crap driver on your computer messing it up...i had an emulator at one point messing my spflashtool up....
Click to expand...
Click to collapse
So , I don't think so that problem is the driver, because SP flash tool works fine when I try to update firmware , it's finish all task , but then the mobile doesn't start . I think that I don't have correct ROM . I tried 3 different ROM and mobile still not start up . Still just blink screen and that's all . And then I have to some how switch off . Then I'm able to do update again trough SP flash Tool , but I need correct one ROM.
I tried to find stock ROM Goophone-i5-0428-f-yzs.zip , but I found it only on some crazy Chinese site 400GB.com (file/19858713) and I was unable to download it .:silly:
are you sure its a goophone you have?
Also..... your phone NEEDS to be charged with ATLEAST 60% or it will fail....flashing really drains the battery and ive had flashings fail just cause of low battery......but yee.... if its not a real goophone it wont work either way.... or if its annother model....you need to have the correct rom for the right phone or it will fail 99,5% of the times..
dont think i can do much more for u.....running out of ideas......it should work with that assuming your hardware is good.
ja.viper said:
So , I don't think so that problem is the driver, because SP flash tool works fine when I try to update firmware , it's finish all task , but then the mobile doesn't start . I think that I don't have correct ROM . I tried 3 different ROM and mobile still not start up . Still just blink screen and that's all . And then I have to some how switch off . Then I'm able to do update again trough SP flash Tool , but I need correct one ROM.
I tried to find stock ROM Goophone-i5-0428-f-yzs.zip , but I found it only on some crazy Chinese site 400GB.com (file/19858713) and I was unable to download it .:silly:
Click to expand...
Click to collapse
stock ROM goophone-i5-0428-f-yzs.zip
virre62 said:
are you sure its a goophone you have?
Also..... your phone NEEDS to be charged with ATLEAST 60% or it will fail....flashing really drains the battery and ive had flashings fail just cause of low battery......but yee.... if its not a real goophone it wont work either way.... or if its annother model....you need to have the correct rom for the right phone or it will fail 99,5% of the times..
dont think i can do much more for u.....running out of ideas......it should work with that assuming your hardware is good.
Click to expand...
Click to collapse
I saw some fake goophone on net , but it was with dual core CPU MTK 6587 etc ...
When I download SU and some other app like CPU Z ,etc I checked and I didn't see any suspicions information . So I hope that it is real Goophone i5 N2 ...
When I finished update firmware I saw in SP Flash tool that it's show some device info , so I'll add tomorrow another screen from this app.And try to verify if it's original goophone i5 N2 .
But this info about at least 60% of batter is important! Because it was charged about 50 % when I run update!
But process of flashing finished without any errors and in the end I saw Green circle , SO I was thinking that It's was finished successfully .....
Important question is . What should be done after updating new Firmware ?
I just tried to Start up the mobile .Should I do anything else ?
well if you get the green circle then its most probably that your out of battery......leave the phone charging for some hours... flash it and when your doen unplug it from the computer and just start it and wait cause the first boot up usually takes time,.....maybe up to 2-10 min depending on what rom u flashed......if you dont have enough battery to complete first boot you might run in to problems.....and if you wanna test your hardware you press the volume + and power and you get in to the factory hardware test menu just if u wanna make sure that ur phone is ok
ja.viper said:
I saw some fake goophone on net , but it was with dual core CPU MTK 6587 etc ...
When I download SU and some other app like CPU Z ,etc I checked and I didn't see any suspicions information . So I hope that it is real Goophone i5 N2 ...
When I finished update firmware I saw in SP Flash tool that it's show some device info , so I'll add tomorrow another screen from this app.And try to verify if it's original goophone i5 N2 .
But this info about at least 60% of batter is important! Because it was charged about 50 % when I run update!
But process of flashing finished without any errors and in the end I saw Green circle , SO I was thinking that It's was finished successfully .....
Important question is . What should be done after updating new Firmware ?
I just tried to Start up the mobile .Should I do anything else ?
Click to expand...
Click to collapse
LG L5 (E610 )
Windows 8 x64
oryginall usb cable
Hello,
When I was flashing my phone yesterday, something went wrong, and my phone isn't working very well(i guess ). So, i have had Android 4.1.2 on stock non-brand ROM. I've decided ,that i will upgrade it to CM 10 , which has nightly builds. There were no errors during instalation and after reboot i have seen my CM ROM working. BUT, i haven't got any GSM connection, and phone was saying, that "there were errors on refreshing networks list" or smth similiar. I've decided to install baseband switcher from L7 device ( i know, stupid decision .. ) in recovery . I did it, and after reboot i got stripes on my screen. I thinked, that it's bricked, but when I plugged in USB cable to my computer, android boots and , have normal desktop with all features enabld, BUT i don't have ability to go to Emergency mode or Recovery mode ( stripes, stripes everywhere ) . What shall i do, is there a small chance to restore my phone from adb in eclipse, or smth ?
rybczyns said:
LG L5 (E610 )
Windows 8 x64
oryginall usb cable
Hello,
When I was flashing my phone yesterday, something went wrong, and my phone isn't working very well(i guess ). So, i have had Android 4.1.2 on stock non-brand ROM. I've decided ,that i will upgrade it to CM 10 , which has nightly builds. There were no errors during instalation and after reboot i have seen my CM ROM working. BUT, i haven't got any GSM connection, and phone was saying, that "there were errors on refreshing networks list" or smth similiar. I've decided to install baseband switcher from L7 device ( i know, stupid decision .. ) in recovery . I did it, and after reboot i got stripes on my screen. I thinked, that it's bricked, but when I plugged in USB cable to my computer, android boots and , have normal desktop with all features enabld, BUT i don't have ability to go to Emergency mode or Recovery mode ( stripes, stripes everywhere ) . What shall i do, is there a small chance to restore my phone from adb in eclipse, or smth ?
Click to expand...
Click to collapse
My friend Eclipse is used to build android apps,in our case(Eclipse application is a plug-in that creates an extension for the extension point,to create applications in java form)... http://wiki.eclipse.org/FAQ_What_is_an_Eclipse_application?
As for the bricked phone,its not bricked if it comes on,its called a soft brick and can be fixed by reinstalling a recovery,then a rom that is compatible with your phone.
Diablo 7 is right as your phone is booting up then you are having soft brick it happens to lot of people what you have to do is just flash custom recovery through pc and look for some compatible rom and flash it via recovery
Total brick means it will not boot up it cannot be detected by USB it's boot got corrupt
Sent from my LG-P765 using xda app-developers app
Ok, thanks for your reply. The thing is, I can't go to recovery or emergency mode, so I think, that i can't use flash tool. What kind of tools, do you mean, which can help me?
EDIT:
Ok, i got it works, First I uninstalled all drivers from my OS, then installed it again from LGMobileSupportTool and using Emergency System Recovery make it works. I'm glad to have Android 4.1.2
Thanks for your replies.
How to do it?
I have the same problem. Can you give me a step-by-step method on how to do it. Thank you very much?
Looks like I have a made a mistake which could easily hand me "The dumbest noob in XDA of the year" Award
I have a ZEN ultrafone 701 HD (MTK 6589) device with HD screen
Things were going fine when this Fine day I got a bright idea to change ROM
I have a rooted Phone with working CWM, so went into recovery and cleared data/cache/dalvik cache,battery log etc
Then I did a epic goof up by clicking on the ROM file of a different device to install as ZIP from CWM . by the time i realized, it was too late
Now the phone boots up, shows logo and reboots,again and again. a previously working key combination to bring diagnostic mode is now not working
The phone starts up and reboots so fast the PC cannot detect the device in adb mode. perfect aint it ?
SO I was wondering is there any way possible at all to get out of this situation ?
me too i am also facing similar problem mine get flashed through sp flash tool ,but still hang on logo after blue screen
any suggestion please
rkinfo_khan said:
me too i am also facing similar problem mine get flashed through sp flash tool ,but still hang on logo after blue screen
any suggestion please
Click to expand...
Click to collapse
flash original stock rom through sp tool
http://support.moulnisky.com/index....ltrafone 701HD_Software_V06_20130424.rar.html
hello sir, iam new to android, i also have zen ultrafone 701 hd, i rooted it using the method given here then installed cwm recovery using mobile uncle tools, ten i tried to flash sam701hd rom but i got status 7 error in cwm and now my phone is stuck on zen logo:crying:, can u please help me, how can i make my phone work??? help would be greatly appreciated sir,,,, regards....
And.. MA phone is back !
I gave my phone to service center and just said I have no Idea what happened .. they took a month and then gave it back repaired ! in other words with Stock ROM
Another thing is maybe If I would have been patient and used SP flash tools properly , things would might have been easier
got a very svere problem .. with my zen ultra 701
hello guys, This is my first post , but that doesn't mean I havn't read a lot of posts on this site
the main reason why I am writing here because I am having problem with my zen ultra 701 it resrats continuously after trying custom rom from here http://forum.xda-developers.com/showthread.php?t=2172803&page=69 ... I am sure I covered all the steps very carefully.. rooted the phn with uncle tools from playstore and cwm recovery from this site .. its been many days since my phn is off.. plz help ..
diagnostic mode doesn't work
and this phn is not being detected properly , it restarts before windows detects and installs anything .... very fast rebooting . I have downloaded vcom driver , zen phn drivers (usb) from this site , before trying custom rom I made sure I have followed all the steps very carefully .. Don't know where it went all wrong .. Plz help asap ..
every suggestion and solution is most welcomed .. and I am here online for 4 hours today ..waiting for any reply
got stuck in boot loop in my zen 701 hd... plz help
i got my phone stuck in boot loop although I installed cwm recovery via mobile uncle tools but i am not able to get into CWM recovery I did made a backup of my rom via CWM before... plz help
boot lopp problem solved
KamaldeepV said:
hello guys, This is my first post , but that doesn't mean I havn't read a lot of posts on this site
the main reason why I am writing here because I am having problem with my zen ultra 701 it resrats continuously after trying custom rom from here http://forum.xda-developers.com/showthread.php?t=2172803&page=69 ... I am sure I covered all the steps very carefully.. rooted the phn with uncle tools from playstore and cwm recovery from this site .. its been many days since my phn is off.. plz help ..
diagnostic mode doesn't work
and this phn is not being detected properly , it restarts before windows detects and installs anything .... very fast rebooting . I have downloaded vcom driver , zen phn drivers (usb) from this site , before trying custom rom I made sure I have followed all the steps very carefully .. Don't know where it went all wrong .. Plz help asap ..
every suggestion and solution is most welcomed .. and I am here online for 4 hours today ..waiting for any reply
Click to expand...
Click to collapse
just download the above package of zen ultraffone 701 hd rom and flash via sp flash tool it works I got my device back...
Is there a way to get into CWM recovery when the phone enters a bootloop or some key combinations. I tried all the key combinations but none of them work.
miui v5 rom for 701 hd here
http://forum.xda-developers.com/showthread.php?t=2747072
Hey guys!!
Here is the latest miui rom for zen ultrafone 701hd but has some bugs...
Chk it out
vishwasnp said:
I gave my phone to service center and just said I have no Idea what happened .. they took a month and then gave it back repaired ! in other words with Stock ROM
Another thing is maybe If I would have been patient and used SP flash tools properly , things would might have been easier
Click to expand...
Click to collapse
how much it will cost if warranty has ended??
Unable to download
nileshtambe
Unable to download the ROM file...post a alternate download and procedure to do it
did u get any way to repair ur Zen ultrafone 701..?? i m also facing thr same problem
KamaldeepV said:
hello guys, This is my first post , but that doesn't mean I havn't read a lot of posts on this site
the main reason why I am writing here because I am having problem with my zen ultra 701 it resrats continuously after trying custom rom from here http://forum.xda-developers.com/showthread.php?t=2172803&page=69 ... I am sure I covered all the steps very carefully.. rooted the phn with uncle tools from playstore and cwm recovery from this site .. its been many days since my phn is off.. plz help ..
diagnostic mode doesn't work
and this phn is not being detected properly , it restarts before windows detects and installs anything .... very fast rebooting . I have downloaded vcom driver , zen phn drivers (usb) from this site , before trying custom rom I made sure I have followed all the steps very carefully .. Don't know where it went all wrong .. Plz help asap ..
every suggestion and solution is most welcomed .. and I am here online for 4 hours today ..waiting for any reply
Click to expand...
Click to collapse
did u get any way to repair ur Zen ultrafone 701..?? i m also facing thr same problem
hello .... sorry for my bad English
at the beginning i was trying to root my mate 9 pro .. every thing went fine until i tried to install super user, then i don't know what happened but the phone was bricked and i cant boot it normally anymore !! i tried to flash several roms through twrp with no luck at all ...
so i started to look for a solution until i found this guide on youtube , i downloaded a tool that screwed my twrp and i can't access it anymore !!
also my pc won't read my phone even through adb .. i can only go to fastboot mode and recovery mode .. please help me !
i just want to get access to twrp again because now i know how to flash roms properly
Hmmm... pat pat this is so sad... I'm kindda getting the same thing as you do, now my phone can only go to fastboot and recovery mode, but what I did is that I tried to flash a custom ROM, I was using the other ROM made by the same team on my other HUAWEI phone for about two years and everything works really well, so I thought this could also works out but not. Since mate9 pro don't have the SD card method of flashing the system, it's really hard to copy the file into the system to modify.
Did you unlock the bootloader and turn on the usb debugging mode before you brick the phone? I happen to have a script that can flash either twrp or the official recovery into the phone, I think if you did those two steps above, it should be working. Also I'm going to try the usb OTG connecting method and see if I can get the file into the system. Good luck on unbrick the phone! Have faith with it!!
Hello Dear Community!
I tried lately to flash a custom rom to my Mi 10T using OrangeFox Custom Recovery.
The Problem is the flashing operation didn't complete successfully, and a result the system partition is empty. in other words there is no rom installed, as many of you are thinking right now - Okey bro flash another rom - , The Problem is my phone do not connect to pc - I tried many Cables and many PCs - and I changed the charging port with new one many times , so I am sure it's a Software issue.
if anyone can help I will be grateful.