Looks like I have a made a mistake which could easily hand me "The dumbest noob in XDA of the year" Award
I have a ZEN ultrafone 701 HD (MTK 6589) device with HD screen
Things were going fine when this Fine day I got a bright idea to change ROM
I have a rooted Phone with working CWM, so went into recovery and cleared data/cache/dalvik cache,battery log etc
Then I did a epic goof up by clicking on the ROM file of a different device to install as ZIP from CWM . by the time i realized, it was too late
Now the phone boots up, shows logo and reboots,again and again. a previously working key combination to bring diagnostic mode is now not working
The phone starts up and reboots so fast the PC cannot detect the device in adb mode. perfect aint it ?
SO I was wondering is there any way possible at all to get out of this situation ?
me too i am also facing similar problem mine get flashed through sp flash tool ,but still hang on logo after blue screen
any suggestion please
rkinfo_khan said:
me too i am also facing similar problem mine get flashed through sp flash tool ,but still hang on logo after blue screen
any suggestion please
Click to expand...
Click to collapse
flash original stock rom through sp tool
http://support.moulnisky.com/index....ltrafone 701HD_Software_V06_20130424.rar.html
hello sir, iam new to android, i also have zen ultrafone 701 hd, i rooted it using the method given here then installed cwm recovery using mobile uncle tools, ten i tried to flash sam701hd rom but i got status 7 error in cwm and now my phone is stuck on zen logo:crying:, can u please help me, how can i make my phone work??? help would be greatly appreciated sir,,,, regards....
And.. MA phone is back !
I gave my phone to service center and just said I have no Idea what happened .. they took a month and then gave it back repaired ! in other words with Stock ROM
Another thing is maybe If I would have been patient and used SP flash tools properly , things would might have been easier
got a very svere problem .. with my zen ultra 701
hello guys, This is my first post , but that doesn't mean I havn't read a lot of posts on this site
the main reason why I am writing here because I am having problem with my zen ultra 701 it resrats continuously after trying custom rom from here http://forum.xda-developers.com/showthread.php?t=2172803&page=69 ... I am sure I covered all the steps very carefully.. rooted the phn with uncle tools from playstore and cwm recovery from this site .. its been many days since my phn is off.. plz help ..
diagnostic mode doesn't work
and this phn is not being detected properly , it restarts before windows detects and installs anything .... very fast rebooting . I have downloaded vcom driver , zen phn drivers (usb) from this site , before trying custom rom I made sure I have followed all the steps very carefully .. Don't know where it went all wrong .. Plz help asap ..
every suggestion and solution is most welcomed .. and I am here online for 4 hours today ..waiting for any reply
got stuck in boot loop in my zen 701 hd... plz help
i got my phone stuck in boot loop although I installed cwm recovery via mobile uncle tools but i am not able to get into CWM recovery I did made a backup of my rom via CWM before... plz help
boot lopp problem solved
KamaldeepV said:
hello guys, This is my first post , but that doesn't mean I havn't read a lot of posts on this site
the main reason why I am writing here because I am having problem with my zen ultra 701 it resrats continuously after trying custom rom from here http://forum.xda-developers.com/showthread.php?t=2172803&page=69 ... I am sure I covered all the steps very carefully.. rooted the phn with uncle tools from playstore and cwm recovery from this site .. its been many days since my phn is off.. plz help ..
diagnostic mode doesn't work
and this phn is not being detected properly , it restarts before windows detects and installs anything .... very fast rebooting . I have downloaded vcom driver , zen phn drivers (usb) from this site , before trying custom rom I made sure I have followed all the steps very carefully .. Don't know where it went all wrong .. Plz help asap ..
every suggestion and solution is most welcomed .. and I am here online for 4 hours today ..waiting for any reply
Click to expand...
Click to collapse
just download the above package of zen ultraffone 701 hd rom and flash via sp flash tool it works I got my device back...
Is there a way to get into CWM recovery when the phone enters a bootloop or some key combinations. I tried all the key combinations but none of them work.
miui v5 rom for 701 hd here
http://forum.xda-developers.com/showthread.php?t=2747072
Hey guys!!
Here is the latest miui rom for zen ultrafone 701hd but has some bugs...
Chk it out
vishwasnp said:
I gave my phone to service center and just said I have no Idea what happened .. they took a month and then gave it back repaired ! in other words with Stock ROM
Another thing is maybe If I would have been patient and used SP flash tools properly , things would might have been easier
Click to expand...
Click to collapse
how much it will cost if warranty has ended??
Unable to download
nileshtambe
Unable to download the ROM file...post a alternate download and procedure to do it
did u get any way to repair ur Zen ultrafone 701..?? i m also facing thr same problem
KamaldeepV said:
hello guys, This is my first post , but that doesn't mean I havn't read a lot of posts on this site
the main reason why I am writing here because I am having problem with my zen ultra 701 it resrats continuously after trying custom rom from here http://forum.xda-developers.com/showthread.php?t=2172803&page=69 ... I am sure I covered all the steps very carefully.. rooted the phn with uncle tools from playstore and cwm recovery from this site .. its been many days since my phn is off.. plz help ..
diagnostic mode doesn't work
and this phn is not being detected properly , it restarts before windows detects and installs anything .... very fast rebooting . I have downloaded vcom driver , zen phn drivers (usb) from this site , before trying custom rom I made sure I have followed all the steps very carefully .. Don't know where it went all wrong .. Plz help asap ..
every suggestion and solution is most welcomed .. and I am here online for 4 hours today ..waiting for any reply
Click to expand...
Click to collapse
did u get any way to repair ur Zen ultrafone 701..?? i m also facing thr same problem
Related
Hello Guyz Im Tanmay Currently Running cynus t2 rom on canvas 2 a110
If ur device is running Mobistel cynus T2 rom and after lots of try u r unable to root it, well hard luck though
After almost 1 month of struggle to root this rom using Sp Flash Tool i m here to say Its impossible
SO, there is a way out to get your device again rooted.
I ve managed to install official MCCX ICS 4.0.4 rom n flashed it using SP FLASH TOOL.
To Proceed u must have inter net connection with windows 8 64 bit because i have tested on it. not so sure about other os.
1. download official stock rom from here "http://d-h.st/NOR". If have skip step.
2. uninstall all mobistel cynus t2 drivers/ pre loader drivers .
3. open control panel in win 8 the metro Ui one not classic one.I think u all might be knowing how to go there.
There click on general tab then click- advanced startup n press restart.
then go to troubleshoot option n press option 7 i.e disable driver signature. Thats the most Important step.
4. Ur pc will get restarted n u ll enter in the in that option.
5. ur UAC User Account Control must be enabled atleast to the recommended level/2nd one from the top.
6. connect ur phone to usb and install mobistel cynus t2 drivers according to ur architecture . the windows will ask u to install drivers in red box.
Press yes. it will be pomp for 3 times all the times press yes.It must be pomp up in red box REMEMBER THAT. if not try x86 drivers.
7.Its time to play.
8. time to install PreLoader drivers. very important step open ur eyes n ears n follow the steps carefully. without it mobile wont flash.
9. switch off ur canvas 2 n remove the battery. remover for atleast 10 sec n then reinsert it.
10. open device manager. In switch off state connect ur phone there the device manager screen will flick and u will see under ports
Mobistel Cynus T2 Da Usb Vcom(3) or some thing like that. Hurry up as it will be visible for only 3 secs.
if its shows that means drivers are sucessfuly installed. For some users if there is pomp MT65xx like that then update drivers manually and browse under mobistel cynus T2 in programme files.
11. open/unrar spflash tool in folder Micromax A110 Stock Rom,Gude,Drivers & Tools. open it.
Load scatter file in folder "Micromax A110 Stock Rom,Gude,Drivers & Tools\S9081_MP_F4_B1_IN_MMX_0.09__flasher_user (1)\S9081_MP_F4_B1_IN_MMX_0.09__flasher_user\S9081_MP_F4_B1_IN_MMX_0.09__flasher_user" NAMED "MT6577_Android_scatter_emmc"
12. Tick all options including recovery.
Press Firmware->upgrade, need not to press download, then at that moment connect canvas 2 in switched off state with battery.
First u will see red ring completes to 100% n further phone will restart. dont panic or dont try to remove usb as it may lead to brick.
remove only when sptool shows error. The error can be 4050 or 8100.
after red ring there will be voilet ring then grey then yellow in last the green ring
Ufff Thats it phone has been flashed. remove battery n press power u r having original micromax ICs stock rom.
:victory:
13. in last use binary tool to root canvas 2 n install CWM recovery n plz install Only pre rooted roms.
the best rom is JellyDream By dark4droid available in Xda site.
I M NOT RESPONSIBLE IF U BRICK UR PHONE. ALL THE PROCESS IS CARRIED IN A SAFE PROCESS AND IS SUCCESSFUL.
THANX TO SOME PEOPLE "DARK4DROID", "TECHIZIES", "lopestom", "mmxa110user" FOR KEEPING ME UP.
IF U LIKE MY WORK PLZ HIT THANX.
IF ANY HELP PLZ POST SUGGESTIONS
Tested this process on Windows 7 32 n 64 bit
The process was sucessful
Haven't tested on xp
any Voltaire can post if the process was sucessful.
Cant get it to flash
I followed the tutorial link given.. the problem is my phone doesnt get any progress bar or anything when i start the firmware upgrade and connect my turned off phone.. nothing happens at all.. please help..
Thanks in advance
First of all its not the phone but the sptool which shows progress in red green voilet yellow n grey bar .
Secondly if sptool doesnt shows progress that mean there is problem with your drivers.
HInt-
1. In win 8 enter the disable driver enforcement signature.
2. install drivers for mobistel. In red box press install drivers for three times . Remember that in red box.
3. connect phone in switch off state and open device manager. Under ports see Mobistel cynus preloader da vcom(3) .
If its there then use flash tool n try to press firmware->upgrade and connect phone immediately in switched of state.
4. Enable UAC to second level atleast.
5. only use sptool provided in the link. and run as admin.
If helped hit thanx.
Hello bro i had d same problem but eventually solves it out so if u need any assistance then pm me n if u dont get a quick reply plz dont loose hope
Xda is for helping each other :thumbup:
Sent from my Cynus T2 using xda app-developers app
---------- Post added at 04:31 PM ---------- Previous post was at 04:30 PM ----------
I can help u as i faced d same prob jus update me wid pm n ill reach to ur help
Sent from my Cynus T2 using xda app-developers app
Look all as I mentioned above that it took me approx a month to got things done. So its not about loosing hope or all.
I was performing steps right my drivers was also installed properly. I tried many old n new versions of sp tool but the sp tool
Provided In this link worked for me so i posted the steps through which i got things working.
For those still error pomp up do these step
First of all try various versions of sp flash tool
Second format ur windows n proceed freshly.
Third try the same process by using ur friends laptop/desktop
Fourth try using different architecture like 32 bit or windows 7
enjoy
mayur.3.92 said:
Hello bro i had d same problem but eventually solves it out so if u need any assistance then pm me n if u dont get a quick reply plz dont loose hope
Xda is for helping each other :thumbup:
Sent from my Cynus T2 using xda app-developers app
---------- Post added at 04:31 PM ---------- Previous post was at 04:30 PM ----------
I can help u as i faced d same prob jus update me wid pm n ill reach to ur help
Sent from my Cynus T2 using xda app-developers app
Click to expand...
Click to collapse
can u please elaborate what the error was and how did u solve it...
It will help others if u want to share n myself will get a help to ease the problems
INVALID IMEI error
i installed New ROM DARK4DROID Jelly dream 4.1 on my QMobile A10 through CWM recovery method.
1) I flashed the CWM recovery file for QMobile A10 to my phone. It goes perfect.
2) Reboot the phone in CWM and installed the new Custom ROM above.
3) Got problem. Invalid IMEI when my sim is loaded by phone. I can not call or receive any thing like messages.
4) The ROM has no issues. Like autorotation and accelerometer is working fine. Just played the games like Temple run , subway surfers and can access google play also.
5) i have made a backup before installing This New ROM. actually i make backup by using default recovery method of phone.
6) one of my friend told me to get back important user data like IMEI by going into CWM recovery boot. but there when i click restore option, can't find the back even i placed it in internal memory and sd card. Please help how to solve this problem. ROM is perfect.. i know its not related to ROM.
Dil2013 said:
i installed New ROM DARK4DROID Jelly dream 4.1 on my QMobile A10 through CWM recovery method.
1) I flashed the CWM recovery file for QMobile A10 to my phone. It goes perfect.
2) Reboot the phone in CWM and installed the new Custom ROM above.
3) Got problem. Invalid IMEI when my sim is loaded by phone. I can not call or receive any thing like messages.
4) The ROM has no issues. Like autorotation and accelerometer is working fine. Just played the games like Temple run , subway surfers and can access google play also.
5) i have made a backup before installing This New ROM. actually i make backup by using default recovery method of phone.
6) one of my friend told me to get back important user data like IMEI by going into CWM recovery boot. but there when i click restore option, can't find the back even i placed it in internal memory and sd card. Please help how to solve this problem. ROM is perfect.. i know its not related to ROM.
Click to expand...
Click to collapse
I know these errors are possesd by many
First of all do a factory backup.
Get root access by root tool n copy modem.img to system folder u will get modem at any site.
If not install some other rom compatible to ur device. Dont forget to hit thanx
tanmay5 said:
Tested this process on Windows 7 32 n 64 bit
The process was sucessful
Haven't tested on xp
any Voltaire can post if the process was sucessful.
Click to expand...
Click to collapse
can u tel me how to install official ICS using windows 7
This post is how to install ics official stock rom on canvas 2 l.
Read the blog carefully
Error
hello SIr
ERROR ERROR !!!!!!
device driver not installed Successfully................on my mmx canvas 2.............. when connect usb cable.
SP flash just says searching and progress bar is at 0% and nothing happens. I have installed preloaded drivers . please assist
lukip005 said:
SP flash just says searching and progress bar is at 0% and nothing happens. I have installed preloaded drivers . please assist
Click to expand...
Click to collapse
does it asked u to install the drivers in red box????
Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
ANYONE?
goophone v88 i5 from dhgate seller name shenzhen
Hey my phone is goophone i5 v88 i5 I brought from dhgate seller nane is shenzhen iam also trying to bypass cwm recovery but no sucess when flashing thrpugh mut and the reebooting to recovery blank display I think the processor is mt6577 dual core ram is 512 mb and screen resolution is 480*854 but with a yweaked stock kernel the system show fake hardware like 2gb ram higher screen resolution and so more but the phone rxactly looks and feels like iphpne 5 and about the software running on this phone I thing it is tje bugg free and coolest full ios6 themed rom
cj27282 said:
Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
Click to expand...
Click to collapse
Same here....unable to enter recovery mode after flashing CWM ...phone works but it "skips'" the recoverymode...factory mode works but yee...some solution for this would be nice......atleast i can still use the phone...altho with the stock rom witch is crap cause i cant back it up for flashing the phone...
cj27282 said:
Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
Click to expand...
Click to collapse
Any progress?
cj27282 said:
Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
Click to expand...
Click to collapse
Ok so problem solved.... unfortunately it will delete everything on your phone....i simply flashed the phone using SP-Flashtool and a rom from here => http://pan.baidu.com/share/link?shareid=324294&uk=540296524#dir/path=/Rom/Goophone I5 Rom supplyed by Zap ...
its the version v18 ... theres a v22 also you can download from http://pan.baidu.com/share/link?shareid=412131&uk=3022339290 but i havent tryed it yet so i dont know how well it works....
can you see what version your stock rom is? ... i think mine was 27 but im not 100% and i have been looking for a later version stock rom but i havent found any yet.....so yee.... the rom i installed now semes to be pretty much the same although it gave me lower antutu scores than the first one i had...dunno how mush that has to do with the software.... but userwise i havent noticed any major differance more than the charging animation thats different when the phone is switched of..and yes the system recovery 3e is in english
now ofcourse these roms are for the Fastcardtech Goophone I5 N2 micro simcard!!!
all is done at your own risk!!
also you HAVE TO INSTALL the mtk6577 VCOM driver in order to be able to use the sp.flastool correctly.....anything else might **** up your phone.... theres a good tutorial here http://forum.xda-developers.com/showthread.php?t=2206421
good luck and please post what stock version you have running now!! and if the phone is running fine otherwise maybe you want to reconsider flashing it since the versions i posted for download are v18 and v22....would love to get my hands on the newest stock rom...(did try to just flash the recovery image from the v18 but it bricked my phone)
jinishpv said:
Hey my phone is goophone i5 v88 i5 I brought from dhgate seller nane is shenzhen iam also trying to bypass cwm recovery but no sucess when flashing thrpugh mut and the reebooting to recovery blank display I think the processor is mt6577 dual core ram is 512 mb and screen resolution is 480*854 but with a yweaked stock kernel the system show fake hardware like 2gb ram higher screen resolution and so more but the phone rxactly looks and feels like iphpne 5 and about the software running on this phone I thing it is tje bugg free and coolest full ios6 themed rom
Click to expand...
Click to collapse
Hello,
About that phone, i buyed that phone, from the same seller, yesterday.
It is fake?Its not the actual goophone i5s that we see on their website?
Thanks!
i have the goophone i5 mt6577 with bee on the back cover
i can have the original recovery image recovery E3?
i wanto to turn back to original factory rom but my older backup don't recognize from colonelzap's cmw recovery
thank you
luponero76 said:
i have the goophone i5 mt6577 with bee on the back cover
i can have the original recovery image recovery E3?
i wanto to turn back to original factory rom but my older backup don't recognize from colonelzap's cmw recovery
thank you
Click to expand...
Click to collapse
did you flash the colonelzap recovery with flashtool??
if your colonelzap cwm works then you should back up your rom with cwm...
(I have not tryed it my self but i think it should work)
download this rom
http://pan.baidu.com/share/link?shareid=412128&uk=3022339290
uncompress and youl find a file called RECOVERY.IMG.....
now open your flashtool (i use sp-flashtool) and load the scatterfile "MT6577_Android_scatter_emmc.txt"
the flash tool is gonna show you a list with all the files that where in the zip..
uncheck all of them so the only one that is checkes is the RECOVERY.IMG ....and then you flash and TADA.....you should have your old S3 recovery back
if it all goes to **** you can just flash the complete rom and it will work.. .....atleast if you have the gooptone i5 n2/lte mtk6577
dont use mobile uncle for these files...that screwed up my phone....they need to be flashed to the phone!!
AND... this is the international v18 rom... dont know what version you have right now....but if you manage to make a back up rom of your phone PLEASE SHARE!!! .... ive been looking for the later international rom....and if you have the backup you can allways upgrade from the v18....so
GOOD LUCK!! ...keep us posted! ...and if you need more flashingdeetales you can just google or ask
CWM Goophone i5 N2 black screen
Hi , I have similar issue like this ...
I have Goophone i5 N2 from aliexpres.com
It's come with original ROM and with Root, unfortunately it has lot of bugs . So I would like to install custom ROM from Colonelzap.blogspot
I spent more then 2 days with trying to flash Clock work recovery mode . So I'll be able to flash new ROM. But there I'm stuck
I red several tutorial for instalation , I did go trough threads here on forum , etc but still without any success .
1, I tried to use MobileUncle MTK for set recovery image with image from colonel zap blog
2, I tried to use (maybe 10 different version of) SP Flash Tool and still got 2 issue (4050 or 8038) during flashing
I used recovery image from Greg's Mobile gadgets
And result is still same , When I try to load to recovery mode , I still got black screen only .. And I have to restart mobile again , then it start up normally ...
I'm starting to be little bit desperate
I'll really appreciate any help or advice
PS: because forum rules , I can't add any links to sources which I used .. But I'll response very fast for any questions. Thanks
Dude!! u gotta make sure u have the MTK Vcom drivers installed on your computer......when u got that its easy peasy..... make sure your phone us turbned of and DISSCONNECTED from the coputer... now in SPflashtool you load the rom that u wanna flash and you press the transfer button....when thats done the computer is gonna start looking for the phone.....this is the moment you connect your phone to the computer....otherwise it wont work...windows will start looking for som other crap driver to use with your phone.......
if u wanna get ur phone to work well you should go to the talkingmobi blog and download the stock rom and flash that one....then when thats done flash the CMW and throu that u put in the manuxo rom!!......thats more or less what ive done...altho i made my own rom...but its more or less the same as manuxos just with less chinese crap...but that u can do your self when u got the phone set up...easyest way i think is with "root app remover" that u can get for free from the app store...or "Playstore" to be precise... good luck!!
ja.viper said:
Hi , I have similar issue like this ...
I have Goophone i5 N2 from aliexpres.com
It's come with original ROM and with Root, unfortunately it has lot of bugs . So I would like to install custom ROM from Colonelzap.blogspot
I spent more then 2 days with trying to flash Clock work recovery mode . So I'll be able to flash new ROM. But there I'm stuck
I red several tutorial for instalation , I did go trough threads here on forum , etc but still without any success .
1, I tried to use MobileUncle MTK for set recovery image with image from colonel zap blog
2, I tried to use (maybe 10 different version of) SP Flash Tool and still got 2 issue (4050 or 8038) during flashing
I used recovery image from Greg's Mobile gadgets
And result is still same , When I try to load to recovery mode , I still got black screen only .. And I have to restart mobile again , then it start up normally ...
I'm starting to be little bit desperate
I'll really appreciate any help or advice
PS: because forum rules , I can't add any links to sources which I used .. But I'll response very fast for any questions. Thanks
Click to expand...
Click to collapse
virre62 said:
Dude!! u gotta make sure u have the MTK Vcom drivers installed on your computer......when u got that its easy peasy..... make sure your phone us turbned of and DISSCONNECTED from the coputer... now in SPflashtool you load the rom that u wanna flash and you press the transfer button....when thats done the computer is gonna start looking for the phone.....this is the moment you connect your phone to the computer....otherwise it wont work...windows will start looking for som other crap driver to use with your phone.......
if u wanna get ur phone to work well you should go to the talkingmobi blog and download the stock rom and flash that one....then when thats done flash the CMW and throu that u put in the manuxo rom!!......thats more or less what ive done...altho i made my own rom...but its more or less the same as manuxos just with less chinese crap...but that u can do your self when u got the phone set up...easyest way i think is with "root app remover" that u can get for free from the app store...or "Playstore" to be precise... good luck!!
Click to expand...
Click to collapse
Hi ,
I did this , several times . I installed correct Vcom driver, and update to last version . And I did follow steps for SP Flash tools. And i can see for aprox 2 sec , load driver for Vcom for Mediatek and So I think , that this part I made correctly.
When I tried load scattle file in to SP flash tool , and then run download and after that I connect switch off phone via cable .
SP FT find mobile via Vcom , and start upload and I see red progress bar on 100 and then after couple seconds I got error message :
1 , sometimes : BROM ERROR: S_FT_NEED_DOWNLOAD_ALL_FAIL (4050) ...
2, or : SP Flash Tool error 8038
ohh yee... ive had that aswell when i flashed the ladies n9589.....thats either due to a bad rom...maybe some error when you downloaded it OR ande most probably an incompatible version of SPFlashtool.... sometimes you have to try diffrent versions to get it to work on your specific phone... if u got the goophone i5 n2/LTE then you should try "SP_Flash_Tool_v3.1224.01"...
Thats the one i use for flashing my goophone and it works just fine.....and when you flash the CWM you should first boot up the phone with the latest rom you flashed b4 cause if you flash on an unbooted rom it wil most probably brick your phone so u gotta do the complete romflash from scratch....remember most costum roms are basically like "CWMbackups" that people do on their modifyed roms and spread....so with spflashtool you allways need to start with a propper rom with scatterfile....but ye....try running annother version of spflashtool... like the one i wrote in top...works for me ...and u can find it on goolgle
ja.viper said:
Hi ,
I did this , several times . I installed correct Vcom driver, and update to last version . And I did follow steps for SP Flash tools. And i can see for aprox 2 sec , load driver for Vcom for Mediatek and So I think , that this part I made correctly.
When I tried load scattle file in to SP flash tool , and then run download and after that I connect switch off phone via cable .
SP FT find mobile via Vcom , and start upload and I see red progress bar on 100 and then after couple seconds I got error message :
1 , sometimes : BROM ERROR: S_FT_NEED_DOWNLOAD_ALL_FAIL (4050) ...
2, or : SP Flash Tool error 8038
Click to expand...
Click to collapse
virre62 said:
ohh yee... ive had that aswell when i flashed the ladies n9589.....thats either due to a bad rom...maybe some error when you downloaded it OR ande most probably an incompatible version of SPFlashtool.... sometimes you have to try diffrent versions to get it to work on your specific phone... if u got the goophone i5 n2/LTE then you should try "SP_Flash_Tool_v3.1224.01"...
Thats the one i use for flashing my goophone and it works just fine.....and when you flash the CWM you should first boot up the phone with the latest rom you flashed b4 cause if you flash on an unbooted rom it wil most probably brick your phone so u gotta do the complete romflash from scratch....remember most costum roms are basically like "CWMbackups" that people do on their modifyed roms and spread....so with spflashtool you allways need to start with a propper rom with scatterfile....but ye....try running annother version of spflashtool... like the one i wrote in top...works for me ...and u can find it on goolgle
Click to expand...
Click to collapse
I used your suggested version of SP_Flash_Tool_v3.1224.01 and I used 2 different recovery.img , but in both tries i got same error as you can see on image
So i tried to upload new rom .
And it's look like a made a brick from this ... Now it doesn't respond at all ... SP flash tool doesn't recognize mobile at all
I can't connect now to the SP flash tool , it's just dont recognize phone , I can see only in device manager , which see 2 cards
and when I connect phone I can see for a moment USB Vcom port driver in list and for 1 second I can see that it write
Code:
Device is work properly
and then is change to image
Code:
Currently, this hardware device is not connected to the computer. (Code 45)
To fix this problem, reconnect this hardware device to the computer.
Do you have the ADB drivers installed on your computer? .... might be there where your problem is.....or annother conflicting driver on your computer....google the forums for ADB driver MTK Vcom driver install.... as i get it the computer wont know how to talk linux without the ADB pack.......i think its included in some vcom driver packs but i do believe i had to install that separatly the first time.....check that out...cause it should work.....if now try it with annother computer...could be some crap driver on your computer messing it up...i had an emulator at one point messing my spflashtool up....
ja.viper said:
So i tried to upload new rom .
And it's look like a made a brick from this ... Now it doesn't respond at all ... SP flash tool doesn't recognize mobile at all
I can't connect now to the SP flash tool , it's just dont recognize phone , I can see only in device manager , which see 2 cards
and when I connect phone I can see for a moment USB Vcom port driver in list and for 1 second I can see that it write
Code:
Device is work properly
and then is change to image
Code:
Currently, this hardware device is not connected to the computer. (Code 45)
To fix this problem, reconnect this hardware device to the computer.
Click to expand...
Click to collapse
stock ROM goophone-i5-0428-f-yzs.zip
virre62 said:
Do you have the ADB drivers installed on your computer? .... might be there where your problem is.....or annother conflicting driver on your computer....google the forums for ADB driver MTK Vcom driver install.... as i get it the computer wont know how to talk linux without the ADB pack.......i think its included in some vcom driver packs but i do believe i had to install that separatly the first time.....check that out...cause it should work.....if now try it with annother computer...could be some crap driver on your computer messing it up...i had an emulator at one point messing my spflashtool up....
Click to expand...
Click to collapse
So , I don't think so that problem is the driver, because SP flash tool works fine when I try to update firmware , it's finish all task , but then the mobile doesn't start . I think that I don't have correct ROM . I tried 3 different ROM and mobile still not start up . Still just blink screen and that's all . And then I have to some how switch off . Then I'm able to do update again trough SP flash Tool , but I need correct one ROM.
I tried to find stock ROM Goophone-i5-0428-f-yzs.zip , but I found it only on some crazy Chinese site 400GB.com (file/19858713) and I was unable to download it .:silly:
are you sure its a goophone you have?
Also..... your phone NEEDS to be charged with ATLEAST 60% or it will fail....flashing really drains the battery and ive had flashings fail just cause of low battery......but yee.... if its not a real goophone it wont work either way.... or if its annother model....you need to have the correct rom for the right phone or it will fail 99,5% of the times..
dont think i can do much more for u.....running out of ideas......it should work with that assuming your hardware is good.
ja.viper said:
So , I don't think so that problem is the driver, because SP flash tool works fine when I try to update firmware , it's finish all task , but then the mobile doesn't start . I think that I don't have correct ROM . I tried 3 different ROM and mobile still not start up . Still just blink screen and that's all . And then I have to some how switch off . Then I'm able to do update again trough SP flash Tool , but I need correct one ROM.
I tried to find stock ROM Goophone-i5-0428-f-yzs.zip , but I found it only on some crazy Chinese site 400GB.com (file/19858713) and I was unable to download it .:silly:
Click to expand...
Click to collapse
stock ROM goophone-i5-0428-f-yzs.zip
virre62 said:
are you sure its a goophone you have?
Also..... your phone NEEDS to be charged with ATLEAST 60% or it will fail....flashing really drains the battery and ive had flashings fail just cause of low battery......but yee.... if its not a real goophone it wont work either way.... or if its annother model....you need to have the correct rom for the right phone or it will fail 99,5% of the times..
dont think i can do much more for u.....running out of ideas......it should work with that assuming your hardware is good.
Click to expand...
Click to collapse
I saw some fake goophone on net , but it was with dual core CPU MTK 6587 etc ...
When I download SU and some other app like CPU Z ,etc I checked and I didn't see any suspicions information . So I hope that it is real Goophone i5 N2 ...
When I finished update firmware I saw in SP Flash tool that it's show some device info , so I'll add tomorrow another screen from this app.And try to verify if it's original goophone i5 N2 .
But this info about at least 60% of batter is important! Because it was charged about 50 % when I run update!
But process of flashing finished without any errors and in the end I saw Green circle , SO I was thinking that It's was finished successfully .....
Important question is . What should be done after updating new Firmware ?
I just tried to Start up the mobile .Should I do anything else ?
well if you get the green circle then its most probably that your out of battery......leave the phone charging for some hours... flash it and when your doen unplug it from the computer and just start it and wait cause the first boot up usually takes time,.....maybe up to 2-10 min depending on what rom u flashed......if you dont have enough battery to complete first boot you might run in to problems.....and if you wanna test your hardware you press the volume + and power and you get in to the factory hardware test menu just if u wanna make sure that ur phone is ok
ja.viper said:
I saw some fake goophone on net , but it was with dual core CPU MTK 6587 etc ...
When I download SU and some other app like CPU Z ,etc I checked and I didn't see any suspicions information . So I hope that it is real Goophone i5 N2 ...
When I finished update firmware I saw in SP Flash tool that it's show some device info , so I'll add tomorrow another screen from this app.And try to verify if it's original goophone i5 N2 .
But this info about at least 60% of batter is important! Because it was charged about 50 % when I run update!
But process of flashing finished without any errors and in the end I saw Green circle , SO I was thinking that It's was finished successfully .....
Important question is . What should be done after updating new Firmware ?
I just tried to Start up the mobile .Should I do anything else ?
Click to expand...
Click to collapse
hi accidently well formatted the entire flash after my fone got bricked now the phone doesnt get run.
i have gionee d1 dream , the phones gets detected in sp flash tool through usb but i have removed everything and i cant find a way to install a firmware again.
do i have hope? i just bought it 2 days back and im very sad for messing it up.
Sp flash tools - formatted android phone
i ve the same case here. usb detected. i can format as many time i want.. it works.... how to start my phone again. i did a backup before formatting . so i ve my previous rom files....
Help possible??
naxilla100 said:
i ve the same case here. usb detected. i can format as many time i want.. it works.... how to start my phone again. i did a backup before formatting . so i ve my previous rom files....
Help possible??
Click to expand...
Click to collapse
Same case here but ny device boot, its just doesn't have an operating system as it is formatted
aliranan8 said:
hi accidently well formatted the entire flash after my fone got bricked now the phone doesnt get run.
i have gionee d1 dream , the phones gets detected in sp flash tool through usb but i have removed everything and i cant find a way to install a firmware again.
do i have hope? i just bought it 2 days back and im very sad for messing it up.
Click to expand...
Click to collapse
same case here , after formatting , phone won't power on or can't be detected by sp flash tools , please please please , even if i connect a charger it is still not charging , is there hope for my dead phone? my phone is a110
Give it to customer care or flash factory image
Sent from my One V using Tapatalk
phone revived
My phone is already revived from the dead , and i already fixed the unknown imei for the sim card slots , my problem now is the NVRAM error for the wifi,
can any one help, i alreadt tried the temporary fix , with changing the wifi file using hex editor, i want a permanent fix.
Same Problem
I have also the same case and given to service center. I am afraid whether service center will consider it under warranty.
BTW, how did you revive your phone ? I am interested to know.
I have XOLO Q700.
markypuno said:
My phone is already revived from the dead , and i already fixed the unknown imei for the sim card slots , my problem now is the NVRAM error for the wifi,
can any one help, i alreadt tried the temporary fix , with changing the wifi file using hex editor, i want a permanent fix.
Click to expand...
Click to collapse
How?
markypuno said:
My phone is already revived from the dead , and i already fixed the unknown imei for the sim card slots , my problem now is the NVRAM error for the wifi,
can any one help, i alreadt tried the temporary fix , with changing the wifi file using hex editor, i want a permanent fix.
Click to expand...
Click to collapse
hey gay i saw your post saiyng that your phone is revived? how you got it? i have a phone dead for sp tools and want to reive it.
wt***
I have the same problem guys I just flash my spice dream uno (android one) with sp flash tool after the flashing my phone is not booting up even now s.p. flasher is not searching my phone.......................
what i have try
1. reinstall drivers.
2. reinstall sp flash tool
3. try it with battry and with out it
4.try to flash it with out virson of s.p. flash tool
5. use new data cabal
but nothing is working
if any one know how to resolve it please help us
:crying::crying: :crying: :crying: :crying:
i formated my intex aqua i5 by the sptools now my phone not detected in sp flash tool through usb i cant find a way to install a firmware again.
please help me ...........................
Hi Friends,
Rooted my phone with e-root tool; happy to share the tool if anyone needs it.
Problem is --
Accidentally deleted the google service apk after rooting my spice MI 502 and it seems some more damage is already done....
Understood from this forum that CWM is one option but my Spice mi502 has a dead recovery when try to boot into recovery mode by pressing the power+volUP+optionkey;
Troubleshooted but failed ----
1. Already tried with CWM but in absence of recovery could not work out;
tried with recovery images of SPICE - MI500 , MI495 , MI425, and some more but invane...
2. Next go was SP flash utility but in again in absence of stock rom of SPICE MI502 have gave a go with SPICE MI500 stock rom and scatter file and other data inclosed; but all received was invalid and unsupported scatter file and partition format and similar issues while trying options within SP flash utility like trying to upgrade firmware, renaming the scatter file from MTK6577 to MTK6575;
Anything i have missed please ask ......... since its a new phone just 5days old, one can understand the desperation and fear of bricking!!!!!!!!
ANYONE PLEASE SHARE THE STOCK ROM FOR SPICE MI502 OR THE RECOVERY IMAGE FOR CWM OR SOME GUIDANCE TOWARDS FIXING THE SPICE MI502; ALSO ANY SUGGESTION ON RESTORING THE GOOGLE SERVICE IS HELPFUL ... !!
Appreciate help...............
Thanks for your time going through and helping for the cause...
I too had some similar problem with my Mi 502 had to get it recovered from the service centre which took more than 15 days
Trying using the Android Commander 0.7.9.11 and put the vending & service apk back to the /system/app ... if nothing works than no option you have to get help from the service centre.. i too couldnt find the stock rom anywhere on the web ..
What did you do for the internal memory part.. im still trying to work on that... cant get much apps on this phone... let me know if you know any way to increase the internal memory....
HM
You can save all by sharing the Stock ROM !!
harry619 said:
I too had some similar problem with my Mi 502 had to get it recovered from the service centre which took more than 15 days
Trying using the Android Commander 0.7.9.11 and put the vending & service apk back to the /system/app ... if nothing works than no option you have to get help from the service centre.. i too couldnt find the stock rom anywhere on the web ..
What did you do for the internal memory part.. im still trying to work on that... cant get much apps on this phone... let me know if you know any way to increase the internal memory....
HM
Click to expand...
Click to collapse
Hi Harry,
If you got the spice recovered from service center; may be you can save us all;
It would be great if you can back up your stock rom and share the link for us to download so we can flash the image to our spice mi502;
further if you can find the scatter file via browsing the rom and recovery.img; if not familiar with browsing the rom, appreciate if you can share the complete stock rom back and will try to do the rest;
Thanks in advance;
Cheers !!
hi
I too looking for recovery.img or custom rom
thanks in advance
finally got the stock recovery of spice mi-502
here it is... the stock recovery of spice mi502...backed up this using adb backup... now you can use this to mk cwm or to solve dead recovery problem... :laugh::laugh::laugh::laugh::laugh:
hit thnnxxx button if u like my work.... i can give full rom if u want... ask me fr dat aftr pressing thnx :laugh::laugh::
dropbox.com/s/szf95vpo6jfj8tc/recovery.img
thanks dude.. but still it shows the red triangle ... before that it won't show that also.. so ur file helped a bit can you tell me how to get cwm or twrp recovery ... ?? i tried the recovery files of Cherry TV and Karbonn but didnt work ... and any idea how to swap the memory in this phone... ? i tried a lot but no luck cant get huge game app on this phone..
at last got it
harry619 said:
at last got it
Click to expand...
Click to collapse
hey can you please tell us hw do you flashed recovery on your phone and can also provide us the recovery file.
tried a lot but it stuck showing a red warning symbols.....
help required waiting fr ur reply
and thanks in advance.....
You can use MTKDroid Tool to get your CWM Recovery
It's available in spice mind 530 and Spice mi 535 pages submitted by me procedure is also given there. You just search.
Sent from my A210 using xda app-developers app
hm0911.blogspot.in
hey check out my blog for the procedure to get CWM
hm0911.blogspot.in
harry619 said:
hey check out my blog for the procedure to get CWM
hm0911.blogspot.in
Click to expand...
Click to collapse
I thing something went wrong
I used mtktools 2.4.5 when I attached my phone to it has shown my phone model and every thing
I followed ur instruction
problem 1 when I was making a backup while making backup of system file it showed that ur device suddenly disconnected
problem2 than I tried to flash cwm
it has shown that task is complete after clicking many yes
than after seeing task complete I sawed an option of reboot I rebooted in recovery suddenly it showed device not connected than my phone restarted it shows the logo of spice than it switch off
after that I tried a lot but my phone is not started
every time it shows spice logo than it is switched off
help me what to do immediate help needed
did u follow the steps properly... I had no problem getting it... if ur phone got stuck in bootloop may b u should try to install moborobo software in ur PC ... connect ur phone to pc and switch it on ..wait for few mins.. it may remove the bootloop....
harry619 said:
did u follow the steps properly... I had no problem getting it... if ur phone got stuck in bootloop may b u should try to install moborobo software in ur PC ... connect ur phone to pc and switch it on ..wait for few mins.. it may remove the bootloop....
Click to expand...
Click to collapse
its boot loop problem I knw that
I think it is giving that problem in flashing recovery
after saying to install cwm it is demanding to flash recovery and while flashing it showing booting problem
and u have one more problem :- i have created boot image and recovery image through sp flash but whn I m downloading it boot image is not loading it showing that image is too large
but it is the exact size required....
so can you help me out
and thanks friend for your help
harry619 said:
hey check out my blog for the procedure to get CWM
hm0911.blogspot.in
Click to expand...
Click to collapse
ERROR during write of the block recovery...this error coming while flashind created recovery...please help...
hey man someone please help
we stuck at this stage. what abut the next stage custom rom plesse help us here to go to the next stage
Spice Mi-502 Flashing
Install latest Version of SP Flash Tool Download Here:
Update MTK 65XX Preloaded Driver from device manager other Sp tool not work. Download here:
Download the SPice MI-502 Stock ROM rooted from here:
Select Download Tab than, than select Download Agend-> MTK AlllnOne_DA.bin
Select Scatter-loading->MT6577_Android_scatter.txt from (!Files_to_FlashTool) Folder
Now click Download and connect your Spice Mi-502 with pc
After Red Bar get Violet Bar than yellow Bar, finally Green Bar Than complete
CHINMAY SARKAR said:
Install latest Version of SP Flash Tool Download Here:
Update MTK 65XX Preloaded Driver from device manager other Sp tool not work. Download here:
Download the SPice MI-502 Stock ROM rooted from here:
Select Download Tab than, than select Download Agend-> MTK AlllnOne_DA.bin
Select Scatter-loading->MT6577_Android_scatter.txt from (!Files_to_FlashTool) Folder
Now click Download and connect your Spice Mi-502 with pc
After Red Bar get Violet Bar than yellow Bar, finally Green Bar Than complete
Click to expand...
Click to collapse
hey man can you provide the stock rom proper link
thank you
I dont know how to do this stuff but my spice mi-502 is stuck in bootloop
CHINMAY SARKAR said:
Install latest Version of SP Flash Tool Download Here:
Update MTK 65XX Preloaded Driver from device manager other Sp tool not work. Download here:
Download the SPice MI-502 Stock ROM rooted from here:
Select Download Tab than, than select Download Agend-> MTK AlllnOne_DA.bin
Select Scatter-loading->MT6577_Android_scatter.txt from (!Files_to_FlashTool) Folder
Now click Download and connect your Spice Mi-502 with pc
After Red Bar get Violet Bar than yellow Bar, finally Green Bar Than complete
Click to expand...
Click to collapse
I dont know how to do this stuff but my spice mi-502 is stuck in bootloop
rajat007 said:
here it is... the stock recovery of spice mi502...backed up this using adb backup... now you can use this to mk cwm or to solve dead recovery problem... :laugh::laugh::laugh::laugh::laugh:
hit thnnxxx button if u like my work.... i can give full rom if u want... ask me fr dat aftr pressing thnx :laugh::laugh::
dropbox.com/s/szf95vpo6jfj8tc/recovery.img
Click to expand...
Click to collapse
hey friend cn you provide me the complete rom backup
spice mi502 stock rom request
dear frnds, can anyone provide stock rom of spice mi 502 ,pls.
Thnk u!
hello..
i was trying to root and install cwm.. and i unfortunately installed the wrong recovery now my phone does not start.. not even in recovery mode..
it shows a messege "Download and install package...........etc. press volume up to proceed down to cancel" pressing the keys don't do any thing phone gets off after a while.. i have a backup of stock recovery and boot but i think both files are same its 20mb both.. i had used Flashify to backup. and i can't even enter fastboot my pc does not detect my phone perhaps because i don't have the drivers... is it possible to fix my phone or its dead for ever..:crying::crying::crying::crying::crying::crying::silly::silly::crying:
i was following this method here.. www[dot]gizdev[dot]com/easy-way-to-root-coolpad-dazen-1/
same problem here
same problem here I try all method from google but I can't my suggestion to go service centre
fixed dazen 1
m.sajid969 said:
same problem here I try all method from google but I can't my suggestion to go service centre
Click to expand...
Click to collapse
Hey.. I have fixed my dazen 1 you can do so... Its easy.. Head to the following thread...
http://forum.xda-developers.com/che...g-boot-img-recovery-img-t3170809#post62587856
New thread..
http://forum.xda-developers.com/showthread.php?t=3236337
can we use custom recovery of same chipset phones
Hey guys,
Yureka Yunique and Yuphoria have same chipset as Coolpad Dazen 1 4g. So can we port their custom recoveries or custom rom into coolpad.??
Is there a tool or way to take full backup of Coolpad Dazen 1 4g like, boot.img, recovery.img, system.img, all radio related and other things??
Hi ,
i am trying to install ROM for coolpad dazen 1 i was selected wrong ROM ,so now my Mobil not working, not starting if u press any and at list it not recognize USB .if i connect USB it not identifying ,,plz any now to solution give me
thanks friends
modem soft bricked
Sir please help me..
I have tried volt modem of other phone. so my mobile modem was soft bricked then I tried non vote modem of yureka then my phone not detecting both sim cads sir please help me.... help me please ..please...
Shivakdl66 said:
Sir please help me..
I have tried volt modem of other phone. so my mobile modem was soft bricked then I tried non vote modem of yureka then my phone not detecting both sim cads sir please help me.... help me please ..please...
Click to expand...
Click to collapse
Same problem I faced ..
1 month ago ...
Solution :--
Flash the original stock ROM(1.1gb) with PC
RAGHAV RT said:
Same problem I faced ..
1 month ago ...
Solution :--
Flash the original stock ROM(1.1gb) with PC
Click to expand...
Click to collapse
Thanks I did it successfully.
Shivakdl66 said:
Thanks I did it successfully.
Click to expand...
Click to collapse
Ok bro
Solution
I have a solution of dead coolpad phones
I know phone is not detect in pc
So I made one boot disk to solve this its work 100%
And you phone will be revert back to its factory versions .
Solution 123 said:
I have a solution of dead coolpad phones
I know phone is not detect in pc
So I made one boot disk to solve this its work 100%
And you phone will be revert back to its factory versions .
Click to expand...
Click to collapse
If you really have solution then share it to others. It may help them to revive their android.
In my coolpad dazen 1 when I was try to flash new software it stop at 11%. What should I do? Plz help me. I tried both stock room software.
bricked my coolpad dazen 1
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
got it working
devendra singh panwar said:
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
Click to expand...
Click to collapse
i have managed to get my coolpad dazen 1 back to life.what i have done is flash different partition with fastboot.
if ur coolpad boots in download mode and secure phone is written and cant be flashed with ygdp tool.there this method is applicable.
like fastboot flash (partition) (file name) .for example "fastboot flash system system.img".if u r confused let me explain widely-
1.I have coolpad stock firmware in .cfb file.you can download it from internet.
2.I installed ygdp tool latest version.To copy data of firmware.you can copy it just load the .cfb file in ygdp tool.Do not flash with it just load the firmware in ygdp tool now when checking is done. go to your ygdp tool installation directory like "c:/ygdp".where ygdp tool is intalled. go to folder downfiles there u will find a folder named 8297l-100 copy it to another safe location.
3.now open partition.xml file in 8297l-100.there u will find partition name and file name.
4.go to ur adb or fastboot folder.
5.open a cmd window by "shift+right click".
6.now command fastboot devices.if ur phone is detected u can flash the partition manually.like fastboot flash (partition name) (file name).
7.partition name should be named correctly otherwise it will fail.
"Tools " u will need-
1. coolpad dazen 1 drivers for pc
2. adb drivers for coolpad dazen 1.
3. ygdp tool latest
thats all folks hope u will able to unbrick ur dazen 1
devendra singh panwar said:
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
Click to expand...
Click to collapse
jackey31 said:
hello..
i was trying to root and install cwm.. and i unfortunately installed the wrong recovery now my phone does not start.. not even in recovery mode..
it shows a messege "Download and install package...........etc. press volume up to proceed down to cancel" pressing the keys don't do any thing phone gets off after a while.. i have a backup of stock recovery and boot but i think both files are same its 20mb both.. i had used Flashify to backup. and i can't even enter fastboot my pc does not detect my phone perhaps because i don't have the drivers... is it possible to fix my phone or its dead for ever..:crying::crying::crying::crying::crying::crying::silly::silly::crying:
i was following this method here.. www[dot]gizdev[dot]com/easy-way-to-root-coolpad-dazen-1/
Click to expand...
Click to collapse
bro go to this link-https://forum.xda-developers.com/android/help/coolpad-dazen-1-dead-plz-help-t3178510/page2#post71688300
dead
hey my coolpad dazen 1 is completly dead it does not show any mesage when connected to pc via data cable nd pressing vol up nd power button. how can i make this working
what happened to ur hanset before it gone dead pls explain
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
King smus said:
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
Click to expand...
Click to collapse
buddy pls tell us if
1. The phone is rooted.
2. The android version is factory or you installed it.
3. You are flashing the rom in stock recovery or other recovery.
When you bought it what was the android language?
If you are having trouble with flasing i advice you to use pc tools. Because in phone you will need to root the device first. If you well know the conditions of root. :good: