Mobistel Cynus T2 rooting problems - Android Q&A, Help & Troubleshooting

Hello Guyz Im Tanmay Currently Running cynus t2 rom on canvas 2 a110
If ur device is running Mobistel cynus T2 rom and after lots of try u r unable to root it, well hard luck though
After almost 1 month of struggle to root this rom using Sp Flash Tool i m here to say Its impossible
SO, there is a way out to get your device again rooted.
I ve managed to install official MCCX ICS 4.0.4 rom n flashed it using SP FLASH TOOL.
To Proceed u must have inter net connection with windows 8 64 bit because i have tested on it. not so sure about other os.
1. download official stock rom from here "http://d-h.st/NOR". If have skip step.
2. uninstall all mobistel cynus t2 drivers/ pre loader drivers .
3. open control panel in win 8 the metro Ui one not classic one.I think u all might be knowing how to go there.
There click on general tab then click- advanced startup n press restart.
then go to troubleshoot option n press option 7 i.e disable driver signature. Thats the most Important step.
4. Ur pc will get restarted n u ll enter in the in that option.
5. ur UAC User Account Control must be enabled atleast to the recommended level/2nd one from the top.
6. connect ur phone to usb and install mobistel cynus t2 drivers according to ur architecture . the windows will ask u to install drivers in red box.
Press yes. it will be pomp for 3 times all the times press yes.It must be pomp up in red box REMEMBER THAT. if not try x86 drivers.
7.Its time to play.
8. time to install PreLoader drivers. very important step open ur eyes n ears n follow the steps carefully. without it mobile wont flash.
9. switch off ur canvas 2 n remove the battery. remover for atleast 10 sec n then reinsert it.
10. open device manager. In switch off state connect ur phone there the device manager screen will flick and u will see under ports
Mobistel Cynus T2 Da Usb Vcom(3) or some thing like that. Hurry up as it will be visible for only 3 secs.
if its shows that means drivers are sucessfuly installed. For some users if there is pomp MT65xx like that then update drivers manually and browse under mobistel cynus T2 in programme files.
11. open/unrar spflash tool in folder Micromax A110 Stock Rom,Gude,Drivers & Tools. open it.
Load scatter file in folder "Micromax A110 Stock Rom,Gude,Drivers & Tools\S9081_MP_F4_B1_IN_MMX_0.09__flasher_user (1)\S9081_MP_F4_B1_IN_MMX_0.09__flasher_user\S9081_MP_F4_B1_IN_MMX_0.09__flasher_user" NAMED "MT6577_Android_scatter_emmc"
12. Tick all options including recovery.
Press Firmware->upgrade, need not to press download, then at that moment connect canvas 2 in switched off state with battery.
First u will see red ring completes to 100% n further phone will restart. dont panic or dont try to remove usb as it may lead to brick.
remove only when sptool shows error. The error can be 4050 or 8100.
after red ring there will be voilet ring then grey then yellow in last the green ring
Ufff Thats it phone has been flashed. remove battery n press power u r having original micromax ICs stock rom.
:victory:
13. in last use binary tool to root canvas 2 n install CWM recovery n plz install Only pre rooted roms.
the best rom is JellyDream By dark4droid available in Xda site.
I M NOT RESPONSIBLE IF U BRICK UR PHONE. ALL THE PROCESS IS CARRIED IN A SAFE PROCESS AND IS SUCCESSFUL.
THANX TO SOME PEOPLE "DARK4DROID", "TECHIZIES", "lopestom", "mmxa110user" FOR KEEPING ME UP.
IF U LIKE MY WORK PLZ HIT THANX.
IF ANY HELP PLZ POST SUGGESTIONS

---

Tested this process on Windows 7 32 n 64 bit
The process was sucessful
Haven't tested on xp
any Voltaire can post if the process was sucessful.

---

Cant get it to flash
I followed the tutorial link given.. the problem is my phone doesnt get any progress bar or anything when i start the firmware upgrade and connect my turned off phone.. nothing happens at all.. please help..
Thanks in advance

---

First of all its not the phone but the sptool which shows progress in red green voilet yellow n grey bar .
Secondly if sptool doesnt shows progress that mean there is problem with your drivers.
HInt-
1. In win 8 enter the disable driver enforcement signature.
2. install drivers for mobistel. In red box press install drivers for three times . Remember that in red box.
3. connect phone in switch off state and open device manager. Under ports see Mobistel cynus preloader da vcom(3) .
If its there then use flash tool n try to press firmware->upgrade and connect phone immediately in switched of state.
4. Enable UAC to second level atleast.
5. only use sptool provided in the link. and run as admin.
If helped hit thanx.

---

Hello bro i had d same problem but eventually solves it out so if u need any assistance then pm me n if u dont get a quick reply plz dont loose hope
Xda is for helping each other :thumbup:
Sent from my Cynus T2 using xda app-developers app
---------- Post added at 04:31 PM ---------- Previous post was at 04:30 PM ----------
I can help u as i faced d same prob jus update me wid pm n ill reach to ur help
Sent from my Cynus T2 using xda app-developers app

---

Look all as I mentioned above that it took me approx a month to got things done. So its not about loosing hope or all.
I was performing steps right my drivers was also installed properly. I tried many old n new versions of sp tool but the sp tool
Provided In this link worked for me so i posted the steps through which i got things working.
For those still error pomp up do these step
First of all try various versions of sp flash tool
Second format ur windows n proceed freshly.
Third try the same process by using ur friends laptop/desktop
Fourth try using different architecture like 32 bit or windows 7
enjoy

---

mayur.3.92 said:
Hello bro i had d same problem but eventually solves it out so if u need any assistance then pm me n if u dont get a quick reply plz dont loose hope
Xda is for helping each other :thumbup:
Sent from my Cynus T2 using xda app-developers app
---------- Post added at 04:31 PM ---------- Previous post was at 04:30 PM ----------
I can help u as i faced d same prob jus update me wid pm n ill reach to ur help
Sent from my Cynus T2 using xda app-developers app
Click to expand...
Click to collapse
can u please elaborate what the error was and how did u solve it...
It will help others if u want to share n myself will get a help to ease the problems

---

INVALID IMEI error
i installed New ROM DARK4DROID Jelly dream 4.1 on my QMobile A10 through CWM recovery method.
1) I flashed the CWM recovery file for QMobile A10 to my phone. It goes perfect.
2) Reboot the phone in CWM and installed the new Custom ROM above.
3) Got problem. Invalid IMEI when my sim is loaded by phone. I can not call or receive any thing like messages.
4) The ROM has no issues. Like autorotation and accelerometer is working fine. Just played the games like Temple run , subway surfers and can access google play also.
5) i have made a backup before installing This New ROM. actually i make backup by using default recovery method of phone.
6) one of my friend told me to get back important user data like IMEI by going into CWM recovery boot. but there when i click restore option, can't find the back even i placed it in internal memory and sd card. Please help how to solve this problem. ROM is perfect.. i know its not related to ROM.

---

Dil2013 said:
i installed New ROM DARK4DROID Jelly dream 4.1 on my QMobile A10 through CWM recovery method.
1) I flashed the CWM recovery file for QMobile A10 to my phone. It goes perfect.
2) Reboot the phone in CWM and installed the new Custom ROM above.
3) Got problem. Invalid IMEI when my sim is loaded by phone. I can not call or receive any thing like messages.
4) The ROM has no issues. Like autorotation and accelerometer is working fine. Just played the games like Temple run , subway surfers and can access google play also.
5) i have made a backup before installing This New ROM. actually i make backup by using default recovery method of phone.
6) one of my friend told me to get back important user data like IMEI by going into CWM recovery boot. but there when i click restore option, can't find the back even i placed it in internal memory and sd card. Please help how to solve this problem. ROM is perfect.. i know its not related to ROM.
Click to expand...
Click to collapse
I know these errors are possesd by many
First of all do a factory backup.
Get root access by root tool n copy modem.img to system folder u will get modem at any site.
If not install some other rom compatible to ur device. Dont forget to hit thanx

---

tanmay5 said:
Tested this process on Windows 7 32 n 64 bit
The process was sucessful
Haven't tested on xp
any Voltaire can post if the process was sucessful.
Click to expand...
Click to collapse
can u tel me how to install official ICS using windows 7

---

This post is how to install ics official stock rom on canvas 2 l.
Read the blog carefully

---

Error
hello SIr
ERROR ERROR !!!!!!
device driver not installed Successfully................on my mmx canvas 2.............. when connect usb cable.

---

SP flash just says searching and progress bar is at 0% and nothing happens. I have installed preloaded drivers . please assist

---

lukip005 said:
SP flash just says searching and progress bar is at 0% and nothing happens. I have installed preloaded drivers . please assist
Click to expand...
Click to collapse
does it asked u to install the drivers in red box????