Hi Friends,
Rooted my phone with e-root tool; happy to share the tool if anyone needs it.
Problem is --
Accidentally deleted the google service apk after rooting my spice MI 502 and it seems some more damage is already done....
Understood from this forum that CWM is one option but my Spice mi502 has a dead recovery when try to boot into recovery mode by pressing the power+volUP+optionkey;
Troubleshooted but failed ----
1. Already tried with CWM but in absence of recovery could not work out;
tried with recovery images of SPICE - MI500 , MI495 , MI425, and some more but invane...
2. Next go was SP flash utility but in again in absence of stock rom of SPICE MI502 have gave a go with SPICE MI500 stock rom and scatter file and other data inclosed; but all received was invalid and unsupported scatter file and partition format and similar issues while trying options within SP flash utility like trying to upgrade firmware, renaming the scatter file from MTK6577 to MTK6575;
Anything i have missed please ask ......... since its a new phone just 5days old, one can understand the desperation and fear of bricking!!!!!!!!
ANYONE PLEASE SHARE THE STOCK ROM FOR SPICE MI502 OR THE RECOVERY IMAGE FOR CWM OR SOME GUIDANCE TOWARDS FIXING THE SPICE MI502; ALSO ANY SUGGESTION ON RESTORING THE GOOGLE SERVICE IS HELPFUL ... !!
Appreciate help...............
Thanks for your time going through and helping for the cause...
I too had some similar problem with my Mi 502 had to get it recovered from the service centre which took more than 15 days
Trying using the Android Commander 0.7.9.11 and put the vending & service apk back to the /system/app ... if nothing works than no option you have to get help from the service centre.. i too couldnt find the stock rom anywhere on the web ..
What did you do for the internal memory part.. im still trying to work on that... cant get much apps on this phone... let me know if you know any way to increase the internal memory....
HM
You can save all by sharing the Stock ROM !!
harry619 said:
I too had some similar problem with my Mi 502 had to get it recovered from the service centre which took more than 15 days
Trying using the Android Commander 0.7.9.11 and put the vending & service apk back to the /system/app ... if nothing works than no option you have to get help from the service centre.. i too couldnt find the stock rom anywhere on the web ..
What did you do for the internal memory part.. im still trying to work on that... cant get much apps on this phone... let me know if you know any way to increase the internal memory....
HM
Click to expand...
Click to collapse
Hi Harry,
If you got the spice recovered from service center; may be you can save us all;
It would be great if you can back up your stock rom and share the link for us to download so we can flash the image to our spice mi502;
further if you can find the scatter file via browsing the rom and recovery.img; if not familiar with browsing the rom, appreciate if you can share the complete stock rom back and will try to do the rest;
Thanks in advance;
Cheers !!
hi
I too looking for recovery.img or custom rom
thanks in advance
finally got the stock recovery of spice mi-502
here it is... the stock recovery of spice mi502...backed up this using adb backup... now you can use this to mk cwm or to solve dead recovery problem... :laugh::laugh::laugh::laugh::laugh:
hit thnnxxx button if u like my work.... i can give full rom if u want... ask me fr dat aftr pressing thnx :laugh::laugh::
dropbox.com/s/szf95vpo6jfj8tc/recovery.img
thanks dude.. but still it shows the red triangle ... before that it won't show that also.. so ur file helped a bit can you tell me how to get cwm or twrp recovery ... ?? i tried the recovery files of Cherry TV and Karbonn but didnt work ... and any idea how to swap the memory in this phone... ? i tried a lot but no luck cant get huge game app on this phone..
at last got it
harry619 said:
at last got it
Click to expand...
Click to collapse
hey can you please tell us hw do you flashed recovery on your phone and can also provide us the recovery file.
tried a lot but it stuck showing a red warning symbols.....
help required waiting fr ur reply
and thanks in advance.....
You can use MTKDroid Tool to get your CWM Recovery
It's available in spice mind 530 and Spice mi 535 pages submitted by me procedure is also given there. You just search.
Sent from my A210 using xda app-developers app
hm0911.blogspot.in
hey check out my blog for the procedure to get CWM
hm0911.blogspot.in
harry619 said:
hey check out my blog for the procedure to get CWM
hm0911.blogspot.in
Click to expand...
Click to collapse
I thing something went wrong
I used mtktools 2.4.5 when I attached my phone to it has shown my phone model and every thing
I followed ur instruction
problem 1 when I was making a backup while making backup of system file it showed that ur device suddenly disconnected
problem2 than I tried to flash cwm
it has shown that task is complete after clicking many yes
than after seeing task complete I sawed an option of reboot I rebooted in recovery suddenly it showed device not connected than my phone restarted it shows the logo of spice than it switch off
after that I tried a lot but my phone is not started
every time it shows spice logo than it is switched off
help me what to do immediate help needed
did u follow the steps properly... I had no problem getting it... if ur phone got stuck in bootloop may b u should try to install moborobo software in ur PC ... connect ur phone to pc and switch it on ..wait for few mins.. it may remove the bootloop....
harry619 said:
did u follow the steps properly... I had no problem getting it... if ur phone got stuck in bootloop may b u should try to install moborobo software in ur PC ... connect ur phone to pc and switch it on ..wait for few mins.. it may remove the bootloop....
Click to expand...
Click to collapse
its boot loop problem I knw that
I think it is giving that problem in flashing recovery
after saying to install cwm it is demanding to flash recovery and while flashing it showing booting problem
and u have one more problem :- i have created boot image and recovery image through sp flash but whn I m downloading it boot image is not loading it showing that image is too large
but it is the exact size required....
so can you help me out
and thanks friend for your help
harry619 said:
hey check out my blog for the procedure to get CWM
hm0911.blogspot.in
Click to expand...
Click to collapse
ERROR during write of the block recovery...this error coming while flashind created recovery...please help...
hey man someone please help
we stuck at this stage. what abut the next stage custom rom plesse help us here to go to the next stage
Spice Mi-502 Flashing
Install latest Version of SP Flash Tool Download Here:
Update MTK 65XX Preloaded Driver from device manager other Sp tool not work. Download here:
Download the SPice MI-502 Stock ROM rooted from here:
Select Download Tab than, than select Download Agend-> MTK AlllnOne_DA.bin
Select Scatter-loading->MT6577_Android_scatter.txt from (!Files_to_FlashTool) Folder
Now click Download and connect your Spice Mi-502 with pc
After Red Bar get Violet Bar than yellow Bar, finally Green Bar Than complete
CHINMAY SARKAR said:
Install latest Version of SP Flash Tool Download Here:
Update MTK 65XX Preloaded Driver from device manager other Sp tool not work. Download here:
Download the SPice MI-502 Stock ROM rooted from here:
Select Download Tab than, than select Download Agend-> MTK AlllnOne_DA.bin
Select Scatter-loading->MT6577_Android_scatter.txt from (!Files_to_FlashTool) Folder
Now click Download and connect your Spice Mi-502 with pc
After Red Bar get Violet Bar than yellow Bar, finally Green Bar Than complete
Click to expand...
Click to collapse
hey man can you provide the stock rom proper link
thank you
I dont know how to do this stuff but my spice mi-502 is stuck in bootloop
CHINMAY SARKAR said:
Install latest Version of SP Flash Tool Download Here:
Update MTK 65XX Preloaded Driver from device manager other Sp tool not work. Download here:
Download the SPice MI-502 Stock ROM rooted from here:
Select Download Tab than, than select Download Agend-> MTK AlllnOne_DA.bin
Select Scatter-loading->MT6577_Android_scatter.txt from (!Files_to_FlashTool) Folder
Now click Download and connect your Spice Mi-502 with pc
After Red Bar get Violet Bar than yellow Bar, finally Green Bar Than complete
Click to expand...
Click to collapse
I dont know how to do this stuff but my spice mi-502 is stuck in bootloop
rajat007 said:
here it is... the stock recovery of spice mi502...backed up this using adb backup... now you can use this to mk cwm or to solve dead recovery problem... :laugh::laugh::laugh::laugh::laugh:
hit thnnxxx button if u like my work.... i can give full rom if u want... ask me fr dat aftr pressing thnx :laugh::laugh::
dropbox.com/s/szf95vpo6jfj8tc/recovery.img
Click to expand...
Click to collapse
hey friend cn you provide me the complete rom backup
spice mi502 stock rom request
dear frnds, can anyone provide stock rom of spice mi 502 ,pls.
Thnk u!
Related
Hello Guyz Im Tanmay Currently Running cynus t2 rom on canvas 2 a110
If ur device is running Mobistel cynus T2 rom and after lots of try u r unable to root it, well hard luck though
After almost 1 month of struggle to root this rom using Sp Flash Tool i m here to say Its impossible
SO, there is a way out to get your device again rooted.
I ve managed to install official MCCX ICS 4.0.4 rom n flashed it using SP FLASH TOOL.
To Proceed u must have inter net connection with windows 8 64 bit because i have tested on it. not so sure about other os.
1. download official stock rom from here "http://d-h.st/NOR". If have skip step.
2. uninstall all mobistel cynus t2 drivers/ pre loader drivers .
3. open control panel in win 8 the metro Ui one not classic one.I think u all might be knowing how to go there.
There click on general tab then click- advanced startup n press restart.
then go to troubleshoot option n press option 7 i.e disable driver signature. Thats the most Important step.
4. Ur pc will get restarted n u ll enter in the in that option.
5. ur UAC User Account Control must be enabled atleast to the recommended level/2nd one from the top.
6. connect ur phone to usb and install mobistel cynus t2 drivers according to ur architecture . the windows will ask u to install drivers in red box.
Press yes. it will be pomp for 3 times all the times press yes.It must be pomp up in red box REMEMBER THAT. if not try x86 drivers.
7.Its time to play.
8. time to install PreLoader drivers. very important step open ur eyes n ears n follow the steps carefully. without it mobile wont flash.
9. switch off ur canvas 2 n remove the battery. remover for atleast 10 sec n then reinsert it.
10. open device manager. In switch off state connect ur phone there the device manager screen will flick and u will see under ports
Mobistel Cynus T2 Da Usb Vcom(3) or some thing like that. Hurry up as it will be visible for only 3 secs.
if its shows that means drivers are sucessfuly installed. For some users if there is pomp MT65xx like that then update drivers manually and browse under mobistel cynus T2 in programme files.
11. open/unrar spflash tool in folder Micromax A110 Stock Rom,Gude,Drivers & Tools. open it.
Load scatter file in folder "Micromax A110 Stock Rom,Gude,Drivers & Tools\S9081_MP_F4_B1_IN_MMX_0.09__flasher_user (1)\S9081_MP_F4_B1_IN_MMX_0.09__flasher_user\S9081_MP_F4_B1_IN_MMX_0.09__flasher_user" NAMED "MT6577_Android_scatter_emmc"
12. Tick all options including recovery.
Press Firmware->upgrade, need not to press download, then at that moment connect canvas 2 in switched off state with battery.
First u will see red ring completes to 100% n further phone will restart. dont panic or dont try to remove usb as it may lead to brick.
remove only when sptool shows error. The error can be 4050 or 8100.
after red ring there will be voilet ring then grey then yellow in last the green ring
Ufff Thats it phone has been flashed. remove battery n press power u r having original micromax ICs stock rom.
:victory:
13. in last use binary tool to root canvas 2 n install CWM recovery n plz install Only pre rooted roms.
the best rom is JellyDream By dark4droid available in Xda site.
I M NOT RESPONSIBLE IF U BRICK UR PHONE. ALL THE PROCESS IS CARRIED IN A SAFE PROCESS AND IS SUCCESSFUL.
THANX TO SOME PEOPLE "DARK4DROID", "TECHIZIES", "lopestom", "mmxa110user" FOR KEEPING ME UP.
IF U LIKE MY WORK PLZ HIT THANX.
IF ANY HELP PLZ POST SUGGESTIONS
Tested this process on Windows 7 32 n 64 bit
The process was sucessful
Haven't tested on xp
any Voltaire can post if the process was sucessful.
Cant get it to flash
I followed the tutorial link given.. the problem is my phone doesnt get any progress bar or anything when i start the firmware upgrade and connect my turned off phone.. nothing happens at all.. please help..
Thanks in advance
First of all its not the phone but the sptool which shows progress in red green voilet yellow n grey bar .
Secondly if sptool doesnt shows progress that mean there is problem with your drivers.
HInt-
1. In win 8 enter the disable driver enforcement signature.
2. install drivers for mobistel. In red box press install drivers for three times . Remember that in red box.
3. connect phone in switch off state and open device manager. Under ports see Mobistel cynus preloader da vcom(3) .
If its there then use flash tool n try to press firmware->upgrade and connect phone immediately in switched of state.
4. Enable UAC to second level atleast.
5. only use sptool provided in the link. and run as admin.
If helped hit thanx.
Hello bro i had d same problem but eventually solves it out so if u need any assistance then pm me n if u dont get a quick reply plz dont loose hope
Xda is for helping each other :thumbup:
Sent from my Cynus T2 using xda app-developers app
---------- Post added at 04:31 PM ---------- Previous post was at 04:30 PM ----------
I can help u as i faced d same prob jus update me wid pm n ill reach to ur help
Sent from my Cynus T2 using xda app-developers app
Look all as I mentioned above that it took me approx a month to got things done. So its not about loosing hope or all.
I was performing steps right my drivers was also installed properly. I tried many old n new versions of sp tool but the sp tool
Provided In this link worked for me so i posted the steps through which i got things working.
For those still error pomp up do these step
First of all try various versions of sp flash tool
Second format ur windows n proceed freshly.
Third try the same process by using ur friends laptop/desktop
Fourth try using different architecture like 32 bit or windows 7
enjoy
mayur.3.92 said:
Hello bro i had d same problem but eventually solves it out so if u need any assistance then pm me n if u dont get a quick reply plz dont loose hope
Xda is for helping each other :thumbup:
Sent from my Cynus T2 using xda app-developers app
---------- Post added at 04:31 PM ---------- Previous post was at 04:30 PM ----------
I can help u as i faced d same prob jus update me wid pm n ill reach to ur help
Sent from my Cynus T2 using xda app-developers app
Click to expand...
Click to collapse
can u please elaborate what the error was and how did u solve it...
It will help others if u want to share n myself will get a help to ease the problems
INVALID IMEI error
i installed New ROM DARK4DROID Jelly dream 4.1 on my QMobile A10 through CWM recovery method.
1) I flashed the CWM recovery file for QMobile A10 to my phone. It goes perfect.
2) Reboot the phone in CWM and installed the new Custom ROM above.
3) Got problem. Invalid IMEI when my sim is loaded by phone. I can not call or receive any thing like messages.
4) The ROM has no issues. Like autorotation and accelerometer is working fine. Just played the games like Temple run , subway surfers and can access google play also.
5) i have made a backup before installing This New ROM. actually i make backup by using default recovery method of phone.
6) one of my friend told me to get back important user data like IMEI by going into CWM recovery boot. but there when i click restore option, can't find the back even i placed it in internal memory and sd card. Please help how to solve this problem. ROM is perfect.. i know its not related to ROM.
Dil2013 said:
i installed New ROM DARK4DROID Jelly dream 4.1 on my QMobile A10 through CWM recovery method.
1) I flashed the CWM recovery file for QMobile A10 to my phone. It goes perfect.
2) Reboot the phone in CWM and installed the new Custom ROM above.
3) Got problem. Invalid IMEI when my sim is loaded by phone. I can not call or receive any thing like messages.
4) The ROM has no issues. Like autorotation and accelerometer is working fine. Just played the games like Temple run , subway surfers and can access google play also.
5) i have made a backup before installing This New ROM. actually i make backup by using default recovery method of phone.
6) one of my friend told me to get back important user data like IMEI by going into CWM recovery boot. but there when i click restore option, can't find the back even i placed it in internal memory and sd card. Please help how to solve this problem. ROM is perfect.. i know its not related to ROM.
Click to expand...
Click to collapse
I know these errors are possesd by many
First of all do a factory backup.
Get root access by root tool n copy modem.img to system folder u will get modem at any site.
If not install some other rom compatible to ur device. Dont forget to hit thanx
tanmay5 said:
Tested this process on Windows 7 32 n 64 bit
The process was sucessful
Haven't tested on xp
any Voltaire can post if the process was sucessful.
Click to expand...
Click to collapse
can u tel me how to install official ICS using windows 7
This post is how to install ics official stock rom on canvas 2 l.
Read the blog carefully
Error
hello SIr
ERROR ERROR !!!!!!
device driver not installed Successfully................on my mmx canvas 2.............. when connect usb cable.
SP flash just says searching and progress bar is at 0% and nothing happens. I have installed preloaded drivers . please assist
lukip005 said:
SP flash just says searching and progress bar is at 0% and nothing happens. I have installed preloaded drivers . please assist
Click to expand...
Click to collapse
does it asked u to install the drivers in red box????
Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
ANYONE?
goophone v88 i5 from dhgate seller name shenzhen
Hey my phone is goophone i5 v88 i5 I brought from dhgate seller nane is shenzhen iam also trying to bypass cwm recovery but no sucess when flashing thrpugh mut and the reebooting to recovery blank display I think the processor is mt6577 dual core ram is 512 mb and screen resolution is 480*854 but with a yweaked stock kernel the system show fake hardware like 2gb ram higher screen resolution and so more but the phone rxactly looks and feels like iphpne 5 and about the software running on this phone I thing it is tje bugg free and coolest full ios6 themed rom
cj27282 said:
Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
Click to expand...
Click to collapse
Same here....unable to enter recovery mode after flashing CWM ...phone works but it "skips'" the recoverymode...factory mode works but yee...some solution for this would be nice......atleast i can still use the phone...altho with the stock rom witch is crap cause i cant back it up for flashing the phone...
cj27282 said:
Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
Click to expand...
Click to collapse
Any progress?
cj27282 said:
Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
Click to expand...
Click to collapse
Ok so problem solved.... unfortunately it will delete everything on your phone....i simply flashed the phone using SP-Flashtool and a rom from here => http://pan.baidu.com/share/link?shareid=324294&uk=540296524#dir/path=/Rom/Goophone I5 Rom supplyed by Zap ...
its the version v18 ... theres a v22 also you can download from http://pan.baidu.com/share/link?shareid=412131&uk=3022339290 but i havent tryed it yet so i dont know how well it works....
can you see what version your stock rom is? ... i think mine was 27 but im not 100% and i have been looking for a later version stock rom but i havent found any yet.....so yee.... the rom i installed now semes to be pretty much the same although it gave me lower antutu scores than the first one i had...dunno how mush that has to do with the software.... but userwise i havent noticed any major differance more than the charging animation thats different when the phone is switched of..and yes the system recovery 3e is in english
now ofcourse these roms are for the Fastcardtech Goophone I5 N2 micro simcard!!!
all is done at your own risk!!
also you HAVE TO INSTALL the mtk6577 VCOM driver in order to be able to use the sp.flastool correctly.....anything else might **** up your phone.... theres a good tutorial here http://forum.xda-developers.com/showthread.php?t=2206421
good luck and please post what stock version you have running now!! and if the phone is running fine otherwise maybe you want to reconsider flashing it since the versions i posted for download are v18 and v22....would love to get my hands on the newest stock rom...(did try to just flash the recovery image from the v18 but it bricked my phone)
jinishpv said:
Hey my phone is goophone i5 v88 i5 I brought from dhgate seller nane is shenzhen iam also trying to bypass cwm recovery but no sucess when flashing thrpugh mut and the reebooting to recovery blank display I think the processor is mt6577 dual core ram is 512 mb and screen resolution is 480*854 but with a yweaked stock kernel the system show fake hardware like 2gb ram higher screen resolution and so more but the phone rxactly looks and feels like iphpne 5 and about the software running on this phone I thing it is tje bugg free and coolest full ios6 themed rom
Click to expand...
Click to collapse
Hello,
About that phone, i buyed that phone, from the same seller, yesterday.
It is fake?Its not the actual goophone i5s that we see on their website?
Thanks!
i have the goophone i5 mt6577 with bee on the back cover
i can have the original recovery image recovery E3?
i wanto to turn back to original factory rom but my older backup don't recognize from colonelzap's cmw recovery
thank you
luponero76 said:
i have the goophone i5 mt6577 with bee on the back cover
i can have the original recovery image recovery E3?
i wanto to turn back to original factory rom but my older backup don't recognize from colonelzap's cmw recovery
thank you
Click to expand...
Click to collapse
did you flash the colonelzap recovery with flashtool??
if your colonelzap cwm works then you should back up your rom with cwm...
(I have not tryed it my self but i think it should work)
download this rom
http://pan.baidu.com/share/link?shareid=412128&uk=3022339290
uncompress and youl find a file called RECOVERY.IMG.....
now open your flashtool (i use sp-flashtool) and load the scatterfile "MT6577_Android_scatter_emmc.txt"
the flash tool is gonna show you a list with all the files that where in the zip..
uncheck all of them so the only one that is checkes is the RECOVERY.IMG ....and then you flash and TADA.....you should have your old S3 recovery back
if it all goes to **** you can just flash the complete rom and it will work.. .....atleast if you have the gooptone i5 n2/lte mtk6577
dont use mobile uncle for these files...that screwed up my phone....they need to be flashed to the phone!!
AND... this is the international v18 rom... dont know what version you have right now....but if you manage to make a back up rom of your phone PLEASE SHARE!!! .... ive been looking for the later international rom....and if you have the backup you can allways upgrade from the v18....so
GOOD LUCK!! ...keep us posted! ...and if you need more flashingdeetales you can just google or ask
CWM Goophone i5 N2 black screen
Hi , I have similar issue like this ...
I have Goophone i5 N2 from aliexpres.com
It's come with original ROM and with Root, unfortunately it has lot of bugs . So I would like to install custom ROM from Colonelzap.blogspot
I spent more then 2 days with trying to flash Clock work recovery mode . So I'll be able to flash new ROM. But there I'm stuck
I red several tutorial for instalation , I did go trough threads here on forum , etc but still without any success .
1, I tried to use MobileUncle MTK for set recovery image with image from colonel zap blog
2, I tried to use (maybe 10 different version of) SP Flash Tool and still got 2 issue (4050 or 8038) during flashing
I used recovery image from Greg's Mobile gadgets
And result is still same , When I try to load to recovery mode , I still got black screen only .. And I have to restart mobile again , then it start up normally ...
I'm starting to be little bit desperate
I'll really appreciate any help or advice
PS: because forum rules , I can't add any links to sources which I used .. But I'll response very fast for any questions. Thanks
Dude!! u gotta make sure u have the MTK Vcom drivers installed on your computer......when u got that its easy peasy..... make sure your phone us turbned of and DISSCONNECTED from the coputer... now in SPflashtool you load the rom that u wanna flash and you press the transfer button....when thats done the computer is gonna start looking for the phone.....this is the moment you connect your phone to the computer....otherwise it wont work...windows will start looking for som other crap driver to use with your phone.......
if u wanna get ur phone to work well you should go to the talkingmobi blog and download the stock rom and flash that one....then when thats done flash the CMW and throu that u put in the manuxo rom!!......thats more or less what ive done...altho i made my own rom...but its more or less the same as manuxos just with less chinese crap...but that u can do your self when u got the phone set up...easyest way i think is with "root app remover" that u can get for free from the app store...or "Playstore" to be precise... good luck!!
ja.viper said:
Hi , I have similar issue like this ...
I have Goophone i5 N2 from aliexpres.com
It's come with original ROM and with Root, unfortunately it has lot of bugs . So I would like to install custom ROM from Colonelzap.blogspot
I spent more then 2 days with trying to flash Clock work recovery mode . So I'll be able to flash new ROM. But there I'm stuck
I red several tutorial for instalation , I did go trough threads here on forum , etc but still without any success .
1, I tried to use MobileUncle MTK for set recovery image with image from colonel zap blog
2, I tried to use (maybe 10 different version of) SP Flash Tool and still got 2 issue (4050 or 8038) during flashing
I used recovery image from Greg's Mobile gadgets
And result is still same , When I try to load to recovery mode , I still got black screen only .. And I have to restart mobile again , then it start up normally ...
I'm starting to be little bit desperate
I'll really appreciate any help or advice
PS: because forum rules , I can't add any links to sources which I used .. But I'll response very fast for any questions. Thanks
Click to expand...
Click to collapse
virre62 said:
Dude!! u gotta make sure u have the MTK Vcom drivers installed on your computer......when u got that its easy peasy..... make sure your phone us turbned of and DISSCONNECTED from the coputer... now in SPflashtool you load the rom that u wanna flash and you press the transfer button....when thats done the computer is gonna start looking for the phone.....this is the moment you connect your phone to the computer....otherwise it wont work...windows will start looking for som other crap driver to use with your phone.......
if u wanna get ur phone to work well you should go to the talkingmobi blog and download the stock rom and flash that one....then when thats done flash the CMW and throu that u put in the manuxo rom!!......thats more or less what ive done...altho i made my own rom...but its more or less the same as manuxos just with less chinese crap...but that u can do your self when u got the phone set up...easyest way i think is with "root app remover" that u can get for free from the app store...or "Playstore" to be precise... good luck!!
Click to expand...
Click to collapse
Hi ,
I did this , several times . I installed correct Vcom driver, and update to last version . And I did follow steps for SP Flash tools. And i can see for aprox 2 sec , load driver for Vcom for Mediatek and So I think , that this part I made correctly.
When I tried load scattle file in to SP flash tool , and then run download and after that I connect switch off phone via cable .
SP FT find mobile via Vcom , and start upload and I see red progress bar on 100 and then after couple seconds I got error message :
1 , sometimes : BROM ERROR: S_FT_NEED_DOWNLOAD_ALL_FAIL (4050) ...
2, or : SP Flash Tool error 8038
ohh yee... ive had that aswell when i flashed the ladies n9589.....thats either due to a bad rom...maybe some error when you downloaded it OR ande most probably an incompatible version of SPFlashtool.... sometimes you have to try diffrent versions to get it to work on your specific phone... if u got the goophone i5 n2/LTE then you should try "SP_Flash_Tool_v3.1224.01"...
Thats the one i use for flashing my goophone and it works just fine.....and when you flash the CWM you should first boot up the phone with the latest rom you flashed b4 cause if you flash on an unbooted rom it wil most probably brick your phone so u gotta do the complete romflash from scratch....remember most costum roms are basically like "CWMbackups" that people do on their modifyed roms and spread....so with spflashtool you allways need to start with a propper rom with scatterfile....but ye....try running annother version of spflashtool... like the one i wrote in top...works for me ...and u can find it on goolgle
ja.viper said:
Hi ,
I did this , several times . I installed correct Vcom driver, and update to last version . And I did follow steps for SP Flash tools. And i can see for aprox 2 sec , load driver for Vcom for Mediatek and So I think , that this part I made correctly.
When I tried load scattle file in to SP flash tool , and then run download and after that I connect switch off phone via cable .
SP FT find mobile via Vcom , and start upload and I see red progress bar on 100 and then after couple seconds I got error message :
1 , sometimes : BROM ERROR: S_FT_NEED_DOWNLOAD_ALL_FAIL (4050) ...
2, or : SP Flash Tool error 8038
Click to expand...
Click to collapse
virre62 said:
ohh yee... ive had that aswell when i flashed the ladies n9589.....thats either due to a bad rom...maybe some error when you downloaded it OR ande most probably an incompatible version of SPFlashtool.... sometimes you have to try diffrent versions to get it to work on your specific phone... if u got the goophone i5 n2/LTE then you should try "SP_Flash_Tool_v3.1224.01"...
Thats the one i use for flashing my goophone and it works just fine.....and when you flash the CWM you should first boot up the phone with the latest rom you flashed b4 cause if you flash on an unbooted rom it wil most probably brick your phone so u gotta do the complete romflash from scratch....remember most costum roms are basically like "CWMbackups" that people do on their modifyed roms and spread....so with spflashtool you allways need to start with a propper rom with scatterfile....but ye....try running annother version of spflashtool... like the one i wrote in top...works for me ...and u can find it on goolgle
Click to expand...
Click to collapse
I used your suggested version of SP_Flash_Tool_v3.1224.01 and I used 2 different recovery.img , but in both tries i got same error as you can see on image
So i tried to upload new rom .
And it's look like a made a brick from this ... Now it doesn't respond at all ... SP flash tool doesn't recognize mobile at all
I can't connect now to the SP flash tool , it's just dont recognize phone , I can see only in device manager , which see 2 cards
and when I connect phone I can see for a moment USB Vcom port driver in list and for 1 second I can see that it write
Code:
Device is work properly
and then is change to image
Code:
Currently, this hardware device is not connected to the computer. (Code 45)
To fix this problem, reconnect this hardware device to the computer.
Do you have the ADB drivers installed on your computer? .... might be there where your problem is.....or annother conflicting driver on your computer....google the forums for ADB driver MTK Vcom driver install.... as i get it the computer wont know how to talk linux without the ADB pack.......i think its included in some vcom driver packs but i do believe i had to install that separatly the first time.....check that out...cause it should work.....if now try it with annother computer...could be some crap driver on your computer messing it up...i had an emulator at one point messing my spflashtool up....
ja.viper said:
So i tried to upload new rom .
And it's look like a made a brick from this ... Now it doesn't respond at all ... SP flash tool doesn't recognize mobile at all
I can't connect now to the SP flash tool , it's just dont recognize phone , I can see only in device manager , which see 2 cards
and when I connect phone I can see for a moment USB Vcom port driver in list and for 1 second I can see that it write
Code:
Device is work properly
and then is change to image
Code:
Currently, this hardware device is not connected to the computer. (Code 45)
To fix this problem, reconnect this hardware device to the computer.
Click to expand...
Click to collapse
stock ROM goophone-i5-0428-f-yzs.zip
virre62 said:
Do you have the ADB drivers installed on your computer? .... might be there where your problem is.....or annother conflicting driver on your computer....google the forums for ADB driver MTK Vcom driver install.... as i get it the computer wont know how to talk linux without the ADB pack.......i think its included in some vcom driver packs but i do believe i had to install that separatly the first time.....check that out...cause it should work.....if now try it with annother computer...could be some crap driver on your computer messing it up...i had an emulator at one point messing my spflashtool up....
Click to expand...
Click to collapse
So , I don't think so that problem is the driver, because SP flash tool works fine when I try to update firmware , it's finish all task , but then the mobile doesn't start . I think that I don't have correct ROM . I tried 3 different ROM and mobile still not start up . Still just blink screen and that's all . And then I have to some how switch off . Then I'm able to do update again trough SP flash Tool , but I need correct one ROM.
I tried to find stock ROM Goophone-i5-0428-f-yzs.zip , but I found it only on some crazy Chinese site 400GB.com (file/19858713) and I was unable to download it .:silly:
are you sure its a goophone you have?
Also..... your phone NEEDS to be charged with ATLEAST 60% or it will fail....flashing really drains the battery and ive had flashings fail just cause of low battery......but yee.... if its not a real goophone it wont work either way.... or if its annother model....you need to have the correct rom for the right phone or it will fail 99,5% of the times..
dont think i can do much more for u.....running out of ideas......it should work with that assuming your hardware is good.
ja.viper said:
So , I don't think so that problem is the driver, because SP flash tool works fine when I try to update firmware , it's finish all task , but then the mobile doesn't start . I think that I don't have correct ROM . I tried 3 different ROM and mobile still not start up . Still just blink screen and that's all . And then I have to some how switch off . Then I'm able to do update again trough SP flash Tool , but I need correct one ROM.
I tried to find stock ROM Goophone-i5-0428-f-yzs.zip , but I found it only on some crazy Chinese site 400GB.com (file/19858713) and I was unable to download it .:silly:
Click to expand...
Click to collapse
stock ROM goophone-i5-0428-f-yzs.zip
virre62 said:
are you sure its a goophone you have?
Also..... your phone NEEDS to be charged with ATLEAST 60% or it will fail....flashing really drains the battery and ive had flashings fail just cause of low battery......but yee.... if its not a real goophone it wont work either way.... or if its annother model....you need to have the correct rom for the right phone or it will fail 99,5% of the times..
dont think i can do much more for u.....running out of ideas......it should work with that assuming your hardware is good.
Click to expand...
Click to collapse
I saw some fake goophone on net , but it was with dual core CPU MTK 6587 etc ...
When I download SU and some other app like CPU Z ,etc I checked and I didn't see any suspicions information . So I hope that it is real Goophone i5 N2 ...
When I finished update firmware I saw in SP Flash tool that it's show some device info , so I'll add tomorrow another screen from this app.And try to verify if it's original goophone i5 N2 .
But this info about at least 60% of batter is important! Because it was charged about 50 % when I run update!
But process of flashing finished without any errors and in the end I saw Green circle , SO I was thinking that It's was finished successfully .....
Important question is . What should be done after updating new Firmware ?
I just tried to Start up the mobile .Should I do anything else ?
well if you get the green circle then its most probably that your out of battery......leave the phone charging for some hours... flash it and when your doen unplug it from the computer and just start it and wait cause the first boot up usually takes time,.....maybe up to 2-10 min depending on what rom u flashed......if you dont have enough battery to complete first boot you might run in to problems.....and if you wanna test your hardware you press the volume + and power and you get in to the factory hardware test menu just if u wanna make sure that ur phone is ok
ja.viper said:
I saw some fake goophone on net , but it was with dual core CPU MTK 6587 etc ...
When I download SU and some other app like CPU Z ,etc I checked and I didn't see any suspicions information . So I hope that it is real Goophone i5 N2 ...
When I finished update firmware I saw in SP Flash tool that it's show some device info , so I'll add tomorrow another screen from this app.And try to verify if it's original goophone i5 N2 .
But this info about at least 60% of batter is important! Because it was charged about 50 % when I run update!
But process of flashing finished without any errors and in the end I saw Green circle , SO I was thinking that It's was finished successfully .....
Important question is . What should be done after updating new Firmware ?
I just tried to Start up the mobile .Should I do anything else ?
Click to expand...
Click to collapse
Unpack the rom to a folder then unpack SPFT start SPFT, Select and load scatter file from rom folder, press download,Then connect the powered off V785 phone to the usb cable.
Original Stock rom
http://www.mediafire.com/download/hoaken3645l0r3c/ot-V785-2AVDEG1_Original_SPFT_ROM_by_bRkA.7z
flash tool
http://www.mediafire.com/download/q5zrm94o4in1ga8/SP-Flash-Tool-v3.1344.0.212.7z
bricked my vodafone 785
hello...do i have a hard brick {vodafone smart mini 4:crying::crying:}?i flashed wrong boot image then i formatted with sp tools by mistake(i know,dump hey) so now i think my backup is corrupt,most files short...so can u pliz upload a sp flash tool backup plllizz i beg u...or preloader file....thanx
MTK Flash Tool dump of Alcatel OneTouch 4033 ...........Just build prop edit it back to vodafone 785 once flashed if it bugs you. <<<< What is the format of this file ??? OK ARC compressed managed it...
I've got bricked Vodafone 785 and I think only spflash will help me but I don't have any stock rom
Please help ?
EDIT:
Someone did format phone .... sp flash works but only Alcatel popc3 logo and recovery is avaible... after spflash I have broken partition table .... I don't know what to do :/
H_C_K said:
Someone did format phone .... sp flash works but only Alcatel popc3 logo and recovery is avaible... after spflash I have broken partition table .... I don't know what to do :/
Click to expand...
Click to collapse
Check it out:
gsmpro.com.pl/serwis/item/190-vodafone-785-smart-4-mini-naprawa-firmware-imei-polskie-menu-usuwanie-blokad-root
HEELP!!!
I was trying to put the nav bar (qemu.hw.mainkeys=0) in the build.prop file and rebooted the phone and iit is boot loop. What can I do? I haven´t CWM because I didnt find it, and I dont find the drivers of the phone.
Please help me it is a new phone ( 2 weeks) and my mum wont ever buy me a smartphone anymore .:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Is there a way to get fota updates for this device as a regular download through pc? If so, could someone please point me to the location? I need the latest update zip for this phone (i think from nov/dec 14) in german.
HI, I followed the instructions above, but I can't get the o.s. Just have the clockworkmod recovery now, so the vodafone 785 doesn't start. I also tried to put the backup folder into my extsd but I'm not able to restore the smartphone from the backup you uploaded (from cwm recovery), because it says "no file". Please can you help me?
Does this work? Anyone confirm?
CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fulgerul46 for posting.
Link
---------------------------------------------------------
Click to expand...
Click to collapse
Hello guys.
I really need this file to restore my phone can someone reupload it somewhere or pm me a link?
Thanks in advance.
I have a new vodafone smart 4 mini UK PAYG with 4.4.2
and another with 4.2.2.
Cant get it to update to same as other one ie 4.2.2 to 4.4.2
using OTA as both say they are uptodate.
Am newbie.
I guess copy firmware from one to the other somehow
and pass a copy to stock firmware archives.
Phone is DEAD. Don't Flash Flashtool File...
Can anyone explain what is to be done is phone is dead ? Totally confused !
I create fw 4 you
ex.ua/163049604103
Anyone? VF785 stock rom?
suslix78 said:
I create fw 4 you
ex.ua/163049604103
Click to expand...
Click to collapse
Where is the file please I need it.
CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fu
" CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fulgerul46 for posting."
Any chance we can get a re-up of this ROM, link is dead. Thanks!
Vodafone smart 4 mini doesn't start
Hi
I bought brand new vodafone smart 4 mini and first I did was root to unlock phone, next a very stupid idea came to my had to update software, after that my phone worked terreble, so another stupid idea came to my head to flash oryginal ROM, I downloaded rom, SPFlash tool , load scatter file and pressed download, everything looked good, it took about one minute and green circle ok at the end. I was verry happy, for couple seconds only, my brand new phone never started again. there was only short blink when I pressed power button , and then nothing. I've been trying to flash the phone many times after that with couple different ROM's but no succes. sometime phone doesn't even blink after flashing. Sometimes at the begining of flashing there is mesage "no partition table" or memory error. Please somebody help me, I'm loosing hope.
I think the only good news is that the "Media Tek PreLoader USB VCOM" still works, and looks like phone cooperates with the tool, maybe I should use different tool, or test phone first with some tool, or create partitin table ?
wigor75 said:
Hi
I bought brand new vodafone smart 4 mini and first I did was root to unlock phone, next a very stupid idea came to my had to update software, after that my phone worked terreble, so another stupid idea came to my head to flash oryginal ROM, I downloaded rom, SPFlash tool , load scatter file and pressed download, everything looked good, it took about one minute and green circle ok at the end. I was verry happy, for couple seconds only, my brand new phone never started again. there was only short blink when I pressed power button , and then nothing. I've been trying to flash the phone many times after that with couple different ROM's but no succes. sometime phone doesn't even blink after flashing. Sometimes at the begining of flashing there is mesage "no partition table" or memory error. Please somebody help me, I'm loosing hope.
I think the only good news is that the "Media Tek PreLoader USB VCOM" still works, and looks like phone cooperates with the tool, maybe I should use different tool, or test phone first with some tool, or create partitin table ?
Click to expand...
Click to collapse
somebody please help
there are away by sd card if anyone can plz pm me umor.raihan skype
Thank you very much, it unbrick the phone and add Arabic language
there is Arabic language in it .
this is not working for me what exactly is supposed to happen when you plug in phone?
hello..
i was trying to root and install cwm.. and i unfortunately installed the wrong recovery now my phone does not start.. not even in recovery mode..
it shows a messege "Download and install package...........etc. press volume up to proceed down to cancel" pressing the keys don't do any thing phone gets off after a while.. i have a backup of stock recovery and boot but i think both files are same its 20mb both.. i had used Flashify to backup. and i can't even enter fastboot my pc does not detect my phone perhaps because i don't have the drivers... is it possible to fix my phone or its dead for ever..:crying::crying::crying::crying::crying::crying::silly::silly::crying:
i was following this method here.. www[dot]gizdev[dot]com/easy-way-to-root-coolpad-dazen-1/
same problem here
same problem here I try all method from google but I can't my suggestion to go service centre
fixed dazen 1
m.sajid969 said:
same problem here I try all method from google but I can't my suggestion to go service centre
Click to expand...
Click to collapse
Hey.. I have fixed my dazen 1 you can do so... Its easy.. Head to the following thread...
http://forum.xda-developers.com/che...g-boot-img-recovery-img-t3170809#post62587856
New thread..
http://forum.xda-developers.com/showthread.php?t=3236337
can we use custom recovery of same chipset phones
Hey guys,
Yureka Yunique and Yuphoria have same chipset as Coolpad Dazen 1 4g. So can we port their custom recoveries or custom rom into coolpad.??
Is there a tool or way to take full backup of Coolpad Dazen 1 4g like, boot.img, recovery.img, system.img, all radio related and other things??
Hi ,
i am trying to install ROM for coolpad dazen 1 i was selected wrong ROM ,so now my Mobil not working, not starting if u press any and at list it not recognize USB .if i connect USB it not identifying ,,plz any now to solution give me
thanks friends
modem soft bricked
Sir please help me..
I have tried volt modem of other phone. so my mobile modem was soft bricked then I tried non vote modem of yureka then my phone not detecting both sim cads sir please help me.... help me please ..please...
Shivakdl66 said:
Sir please help me..
I have tried volt modem of other phone. so my mobile modem was soft bricked then I tried non vote modem of yureka then my phone not detecting both sim cads sir please help me.... help me please ..please...
Click to expand...
Click to collapse
Same problem I faced ..
1 month ago ...
Solution :--
Flash the original stock ROM(1.1gb) with PC
RAGHAV RT said:
Same problem I faced ..
1 month ago ...
Solution :--
Flash the original stock ROM(1.1gb) with PC
Click to expand...
Click to collapse
Thanks I did it successfully.
Shivakdl66 said:
Thanks I did it successfully.
Click to expand...
Click to collapse
Ok bro
Solution
I have a solution of dead coolpad phones
I know phone is not detect in pc
So I made one boot disk to solve this its work 100%
And you phone will be revert back to its factory versions .
Solution 123 said:
I have a solution of dead coolpad phones
I know phone is not detect in pc
So I made one boot disk to solve this its work 100%
And you phone will be revert back to its factory versions .
Click to expand...
Click to collapse
If you really have solution then share it to others. It may help them to revive their android.
In my coolpad dazen 1 when I was try to flash new software it stop at 11%. What should I do? Plz help me. I tried both stock room software.
bricked my coolpad dazen 1
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
got it working
devendra singh panwar said:
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
Click to expand...
Click to collapse
i have managed to get my coolpad dazen 1 back to life.what i have done is flash different partition with fastboot.
if ur coolpad boots in download mode and secure phone is written and cant be flashed with ygdp tool.there this method is applicable.
like fastboot flash (partition) (file name) .for example "fastboot flash system system.img".if u r confused let me explain widely-
1.I have coolpad stock firmware in .cfb file.you can download it from internet.
2.I installed ygdp tool latest version.To copy data of firmware.you can copy it just load the .cfb file in ygdp tool.Do not flash with it just load the firmware in ygdp tool now when checking is done. go to your ygdp tool installation directory like "c:/ygdp".where ygdp tool is intalled. go to folder downfiles there u will find a folder named 8297l-100 copy it to another safe location.
3.now open partition.xml file in 8297l-100.there u will find partition name and file name.
4.go to ur adb or fastboot folder.
5.open a cmd window by "shift+right click".
6.now command fastboot devices.if ur phone is detected u can flash the partition manually.like fastboot flash (partition name) (file name).
7.partition name should be named correctly otherwise it will fail.
"Tools " u will need-
1. coolpad dazen 1 drivers for pc
2. adb drivers for coolpad dazen 1.
3. ygdp tool latest
thats all folks hope u will able to unbrick ur dazen 1
devendra singh panwar said:
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
Click to expand...
Click to collapse
jackey31 said:
hello..
i was trying to root and install cwm.. and i unfortunately installed the wrong recovery now my phone does not start.. not even in recovery mode..
it shows a messege "Download and install package...........etc. press volume up to proceed down to cancel" pressing the keys don't do any thing phone gets off after a while.. i have a backup of stock recovery and boot but i think both files are same its 20mb both.. i had used Flashify to backup. and i can't even enter fastboot my pc does not detect my phone perhaps because i don't have the drivers... is it possible to fix my phone or its dead for ever..:crying::crying::crying::crying::crying::crying::silly::silly::crying:
i was following this method here.. www[dot]gizdev[dot]com/easy-way-to-root-coolpad-dazen-1/
Click to expand...
Click to collapse
bro go to this link-https://forum.xda-developers.com/android/help/coolpad-dazen-1-dead-plz-help-t3178510/page2#post71688300
dead
hey my coolpad dazen 1 is completly dead it does not show any mesage when connected to pc via data cable nd pressing vol up nd power button. how can i make this working
what happened to ur hanset before it gone dead pls explain
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
King smus said:
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
Click to expand...
Click to collapse
buddy pls tell us if
1. The phone is rooted.
2. The android version is factory or you installed it.
3. You are flashing the rom in stock recovery or other recovery.
When you bought it what was the android language?
If you are having trouble with flasing i advice you to use pc tools. Because in phone you will need to root the device first. If you well know the conditions of root. :good:
Hi
My phone Infocus m370i is soft bricked. If you have the stock rom of this (or this phone), then kindly please update the rom on the forum. I've searched everywhere on the net for it and I haven't found it anywhere as of yet.
Thanks,
handsome_94 said:
Hi
My phone Infocus m370i is soft bricked. If you have the stock rom of this (or this phone), then kindly please update the rom on the forum. I've searched everywhere on the net for it and I haven't found it anywhere as of yet.
Thanks,
Click to expand...
Click to collapse
Got it!!
All roms of INFOCUS are given on their Taiwan website. Unfortunately, the site is in local language but with little exploration I was able to find out the rom in it. I'm pasting a link to it:
Code:
dl.infocusphone.com/update/M370_00WW(INF)/FAO-1120-0-00WW-A01-update.zip
This worked absolutely fine on my phone with stock recovery.
Procedure Required
Please help me to follow the procedure for doing this ....my phone isn"t working for 1 month service centers also nothing to do
saikrishna veerla said:
Please help me to follow the procedure for doing this ....my phone isn"t working for 1 month service centers also nothing to do
Click to expand...
Click to collapse
Ok, here is the procedure.
1) Download firmware for your phone (I'm supposing its m370i) and put it in a mini SD card.
2) Now insert this memory card into your phone, and boot into recovery mode.
3) Now select update zip from SD Card and select the firmware file in your SD Card.
4) Once the operation has started wait for 15-20 mins. for the entire process to end. Do not restart the phone till the procedure ends on its own.
That's it!!
Infocus M370i
Hello ,
At the moment I have this Phone in my hand ..
Its getting error on Unfortunately ,System UI has stopped !!
I already download Rom ..
But Phone can't go to Recovery Mode ..
Plz shear if have any way to put Recovery Mode !!
Thanks
Wbr'
AniAXN
AniAXN said:
Hello ,
At the moment I have this Phone in my hand ..
Its getting error on Unfortunately ,System UI has stopped !!
I already download Rom ..
But Phone can't go to Recovery Mode ..
Plz shear if have any way to put Recovery Mode !!
Thanks
Wbr'
AniAXN
Click to expand...
Click to collapse
1) Make sure you have adb and fastboot
2) Enable USB debugging in your phone (In developer options)
3) Change your USB computer connection -> Camera (PTP)
4) Execute command "adb devices" Now it should show your device's serial on the screen.
5) After (4) execute the command "adb reboot recovery". That's it.
Error to Install
handsome_94 said:
1) Make sure you have adb and fastboot
2) Enable USB debugging in your phone (In developer options)
3) Change your USB computer connection -> Camera (PTP)
4) Execute command "adb devices" Now it should show your device's serial on the screen.
5) After (4) execute the command "adb reboot recovery". That's it.
Click to expand...
Click to collapse
Hello ..
I Trying Install in Recovery Mode with SD Card
But Get This Error ..
Here I Use Your File which you Post ..
I Don't know why i can't post screen shot ..???
Wbr'
AniAXN
handsome_94 said:
Got it!!
All roms of INFOCUS are given on their Taiwan website. Unfortunately, the site is in local language but with little exploration I was able to find out the rom in it. I'm pasting a link to it:
Code:
dl.infocusphone.com/update/M370_00WW(INF)/FAO-1120-0-00WW-A01-update.zip
This worked absolutely fine on my phone with stock recovery.
Click to expand...
Click to collapse
This firmware is meant for M370. Will it function properly on M370i?
I compared the hardware properties and I don't seem to identify any relevant differences, so, I just want to confirm here.
von COLLINZO said:
This firmware is meant for M370. Will it function properly on M370i?
I compared the hardware properties and I don't seem to identify any relevant differences, so, I just want to confirm here.
Click to expand...
Click to collapse
Yes, It has worked on my Infocus M370i twice (1 GB Ram/8 GB memory). I'm not so sure about 2 GB version as I don't have it but theoretically it should work on it too.
Hello ..
This Rom not work with my Phone ..!!
If any body have this file ..
Plz shear here ..
Its I need very badly ..
Wbr'
AniAXN
how to root infocus m370i please help
puipuia said:
how to root infocus m370i please help
Click to expand...
Click to collapse
Use kingroot app to root m370i. Search, download the app of this app from Google. Run it and in press of a button everything will get done.
try to install system update but I remove some system app will this brick my phone if I install it...please help
khopsa said:
try to install system update but I remove some system app will this brick my phone if I install it...please help
Click to expand...
Click to collapse
If you have ever rooted your phone which I believe you have, then installing software update will brick your phone.
To avoid this, you should first install stock rom and then update the system.
thanks for your reply....
is there any custom ROM for infocus m370i...
how to root infocus m 370i
---------- Post added at 08:10 AM ---------- Previous post was at 08:07 AM ----------
kingroot is not working both apk and pc version in infocus m 370i.can it works for u ? pls rply
handsome_94 said:
Hi
My phone Infocus m370i is soft bricked. If you have the stock rom of this (or this phone), then kindly please update the rom on the forum. I've searched everywhere on the net for it and I haven't found it anywhere as of yet.
Thanks,
Click to expand...
Click to collapse
bro how long does it take for verifying update package? Its took 25 mins since the procedure started!
plz help bro
Hi
I am having problem with the touch in my in focus m370i to my knowledge I didn't drop it ... After the latest software update this problem arose .... Any ideas ????
i had done the same procedure tht you told to update the rom from stock recovery but it bricked and showing only logo and restarts wht to do now ?