Hey...
I'm stuck with locked bootloader with Cyapop 5.6.
And i cannot do anything from the fastboot.
I want to restore Oxygen OS 2.2.0 but i cannot do anything...
I have TWRP 2.8.7.0 ( what i got) and i tried to flash the 3.0.0.0 and it fails too.
What should i do?!
Flash the full oxygen dump with your twrp
Here is the link:-
https://www.androidfilehost.com/?fid=24389512218017971
yot2703 said:
Hey...
I'm stuck with locked bootloader with Cyapop 5.6.
And i cannot do anything from the fastboot.
I want to restore Oxygen OS 2.2.0 but i cannot do anything...
I have TWRP 2.8.7.0 ( what i got) and i tried to flash the 3.0.0.0 and it fails too.
What should i do?!
Click to expand...
Click to collapse
Try flashing suggested full rom and don't install roms while you have locked bootloader
Related
Ok , So I finally was able to unlock my bootloader after getting that 50 % error, I thought that I'd flash miui 8 , so I downloaded the rom from official mi website and flashed it with twrp but for some reason I got stuck in a bootloop. I dont want to download fastboot rom as it takes a lot of time due to slow internet, so could anyone tell me how can i successfully flash a rom from twrp. I've got bot miui 8 chinese developer rom and global beta rom downloaded.
You need patched boot for normal twrp or u must use cofface twrp to flash the rom.
You cant flash stock rom via twrp without patched boot.img
And if you are flashing marshmallow rom u must know that the bootloader will lock itself again.
Why not just flash the miui.eu version? No boot image mess..
s-u-f-f-e-r said:
You need patched boot for normal twrp or u must use cofface twrp to flash the rom.
You cant flash stock rom via twrp without patched boot.img
And if you are flashing marshmallow rom u must know that the bootloader will lock itself again.
Click to expand...
Click to collapse
Edit : The recovery worked. Thanx.
where can I find a patched boot.img for latest chinese developer rom.Thanx for the fast reply.
Just use cofface recovery for stock roms:
http://forum.xda-developers.com/redmi-note-3/development/recovery-kenzotwrp-cafface-3-0-0-t3369341
I think that the Alca recovery do the same, but I haven't test it yet
s-u-f-f-e-r said:
Just use cofface recovery for stock roms:
http://forum.xda-developers.com/redmi-note-3/development/recovery-kenzotwrp-cafface-3-0-0-t3369341
I think that the Alca recovery do the same, but I haven't test it yet
Click to expand...
Click to collapse
Thanks. Problem solved.
While H2OS was loaded, I flashed TWRP. After that I rebooted to recovery, cleared all the essential things, flashed a ROM followed by a Gapps package. After that, when I chose reboot to system, the phone stays stuck at the OnePlus logo screen. I can't access the recovery either. I flashed 3 different versions of TWRP, but still couldn't boot to recovery. P.S.: Bootloader is unlocked
What can I do now?
UPDATE: BluSpark's modded TWRP works, but after flashing the ROM nothing boots
meraj99 said:
While H2OS was loaded, I flashed TWRP. After that I rebooted to recovery, cleared all the essential things, flashed a ROM followed by a Gapps package. After that, when I chose reboot to system, the phone stays stuck at the OnePlus logo screen. I can't access the recovery either. I flashed 3 different versions of TWRP, but still couldn't boot to recovery. P.S.: Bootloader is unlocked
What can I do now?
UPDATE: BluSpark's modded TWRP works, but after flashing the ROM nothing boots
Click to expand...
Click to collapse
You should fastboot flash old OOS 2 stock recovery, then full OOS 2.2.2 Rom.
Then root and install offical TWRP (not BS V41).
Then install what you want (but not Oxygen or hydrogen on MM)
Kéno40 said:
You should fastboot flash old OOS 2 stock recovery, then full OOS 2.2.2 Rom.
Then root and install offical TWRP (not BS V41).
Then install what you want (but not Oxygen or hydrogen on MM)
Click to expand...
Click to collapse
oh, root access is compulsory?
Just tinking about root, because I used it to install TWRP but you're right, fastboot flash could do it
I am using TWRP 3.0.2.0 It is giving me problems as shown in images below.
I tried flashing new recovery but it also couldn't get flashed. While flashing new CM 13/CM14.1 ROMs it is giving errors, but it flashes older CM 13 ROMs fine.
dvaibhavd said:
I am using TWRP 3.0.2.0 It is giving me problems as shown in images below.
I tried flashing new recovery but it also couldn't get flashed. While flashing new CM 13/CM14.1 ROMs it is giving errors, but it flashes older CM 13 ROMs fine.
Click to expand...
Click to collapse
Bro wait....!!!
Is this real?
You are using too old recovery(as your ss says 2.8.7)+old boot loader..you need some work on your phone to be able to flash new cm 13/14.1.
Just head over to general thread and find how to upgrade boot loader and install latest twrp.
After that you can flash all latest available ROM.
Boot logo Problem
Hey I have used this method http://forum.xda-developers.com/one...update-bootloader-firmware-to-t3478917/page20 and updated the BL.However after flashing CM14 I am stuck on 1+ logo.
I was able to flash stock Oxygen Rom .I want to flash CM 14 please help
Same
utkhirodka said:
Hey I have used this method http://forum.xda-developers.com/one...update-bootloader-firmware-to-t3478917/page20 and updated the BL.However after flashing CM14 I am stuck on 1+ logo.
I was able to flash stock Oxygen Rom .I want to flash CM 14 please help
Click to expand...
Click to collapse
Same here with the TZ issues. As for the recovery, the TWRP version 3.0.2-0 is the most latest one that I can flash & boot into successfully. If I flash anything newer than 3.0.0-1 my OPX is stuck on OP logo as well.
My phone is stuck at one plus boot logo when i tried to go into recovery mode or tried to start it the oneplus logo popped and goes out again and again and when i tried to flash twrp through fastboot mode it say the device is locked cant change or erase the recovery what should i do please guide me
The only recovery that will flash on mine is 3.0.2-0. I've tried flashing through Fastboot. I've even tried to use the dd command for both 3.0.3-0 official and blu sparkz v41 and it gets stuck at the OnePlus logo.
Phone still boots into OOS just fine and 3.0.2-0 flashes through the old JMZ TWRP app just fine. It's just any other method that doesn't work.
The latest recoverys for new bootloader is 3.0.3, bluesparks 3.0.2-1 V41 or Sultans updated TWRP. 3.0.2 and under us for old bootloader.
Exodusche said:
The latest recoverys for new bootloader is 3.0.3, bluesparks 3.0.2-1 V41 or Sultans updated TWRP. 3.0.2 and under us for old bootloader.
Click to expand...
Click to collapse
Again, I tried flashing 3.0.3 and it wouldn't stick.
blackknightavalon said:
Again, I tried flashing 3.0.3 and it wouldn't stick.
Click to expand...
Click to collapse
After flashing recovery you have to boot right into it with fastboot command then swipe to allow modifications?
Exodusche said:
After flashing recovery you have to boot right into it with fastboot command then swipe to allow modifications?
Click to expand...
Click to collapse
As stated above, all it does is hang at the OnePlus logo.
Also...
fastboot boot drive:\path\to\twrp-3.0.3-0-onyx.img
downloading 'boot.img'...
OKAY [ 0.507s]
booting...
FAILED (remote: dtb not found)
finished. total time: 0.540s
Click to expand...
Click to collapse
blackknightavalon said:
As stated above, all it does is hang at the OnePlus logo.
Click to expand...
Click to collapse
Ok sorry what I did was keep it simple. Reflash original stock recovery, flash 2.2.3 then flash 3.1.4 and boot. Just skip everything and reboot back to bootloader mode. Now you can flash latest TWRP and should boot latest ROMs without any issues.
Exodusche said:
Ok sorry what I did was keep it simple. Reflash original stock recovery, flash 2.2.3 then flash 3.1.4 and boot. Just skip everything and reboot back to bootloader mode. Now you can flash latest TWRP and should boot latest ROMs without any issues.
Click to expand...
Click to collapse
2.2.3 flashed successfully. I already know 3.1.4 will work. I'll post again if your plan completely works.
...and I'm still getting the same errors after flashing 3.1.4 through stock recovery. o.0
I'm going to start from the earliest firmware available and flash progressively from there and see if that works.
My phone stucks on oneplus logo after flashing paranoid rom . I do everything like wiping dalvin cache, data , system . TWRP recovery i am using is 3.03 and currently running cm 13. Any solution?
Mandeep Singh 07 said:
My phone stucks on oneplus logo after flashing paranoid rom . I do everything like wiping dalvin cache, data , system . TWRP recovery i am using is 3.03 and currently running cm 13. Any solution?
Click to expand...
Click to collapse
Is ur bootloader updated to latest one ??
[email protected] said:
Is ur bootloader updated to latest one ??
Click to expand...
Click to collapse
yeah its latest one 3.0.3
Mandeep Singh 07 said:
yeah its latest one 3.0.3
Click to expand...
Click to collapse
PA I believe is on the old bootloader still. So you would have to downgrade your bootloader by flashing LL stock recovery and 2.x.x OOS firmware. Not worth the hassle if you ask me.
Mandeep Singh 07 said:
yeah its latest one 3.0.3
Click to expand...
Click to collapse
actually when i root the phone , then it goes into bootloop, i didn`t backup my data so i lost my all data ,
after that i install paranoid then it stucks on boot logo , i tried it several times but none happens,
then i use adb push command ino twrp recovery(3.0.2) to copy cyanogenmod after that i flash it , it fails ,
then i flash cwm recovery then flash is succeded and currently running cm 13 ,
when i installed root checker it said your phone is partially rooted, when i enable root option in developer option then it said root verified.
But when i tried to flash other roms using twrp (3.0.3, 3.0.2) it stucks on boot logo.
Please help me
Exodusche said:
PA I believe is on the old bootloader still. So you would have to downgrade your bootloader by flashing LL stock recovery and 2.x.x OOS firmware. Not worth the hassle if you ask me.
Click to expand...
Click to collapse
lower bootloader can`t flash it fails every time....
Mandeep Singh 07 said:
lower bootloader can`t flash it fails every time....
Click to expand...
Click to collapse
Did you also revert to the old TWRP version 3.0.2? Other then that I'm out of ideas.
Exodusche said:
Did you also revert to the old TWRP version 3.0.2? Other then that I'm out of ideas.
Click to expand...
Click to collapse
At that twrp blu spark 3.0.2 is available and of only that recovery is working lower recoviers cant flash and boot
Mandeep Singh 07 said:
At that twrp blu spark 3.0.2 is available and of only that recovery is working lower recoviers cant flash and boot
Click to expand...
Click to collapse
Right but if your downgrading your bootloader to flash PA you need to use old bootloader TWRP 3.0.2. So that being said easiest way is flash 2.2.3 with blusprk 3.0.2-2 TWRP then immediately after flash TWRP 3.0.2 image. Now re boot back into recovery and flash PA. I prefer flashing 2.2.3 with stock LL recovery less chance of issues. Then just fastboot flash old TWRP 3.0.2 and continue with PA.
Exodusche said:
Right but if your downgrading your bootloader to flash PA you need to use old bootloader TWRP 3.0.2. So that being said easiest way is flash 2.2.3 with blusprk 3.0.2-2 TWRP then immediately after flash TWRP 3.0.2 image. Now re boot back into recovery and flash PA. I prefer flashing 2.2.3 with stock LL recovery less chance of issues. Then just fastboot flash old TWRP 3.0.2 and continue with PA.
Click to expand...
Click to collapse
thanks bro this works fine
hello,
my current situation: i am on oos 2.2.3, not rooted, twrp 3.0.1-0 running.
i want to install a 3.x.x oos, version, i wanted to install 3.1.2 first, cause oneplus site i can install that directly form 2.2.3 (no such info on 3.1.3 and 3.1.4)
when i try to install with twrp, it says "this package is for "Oneplus" devices, this is a "ONE"
i think i am using the wrong twrp version. tried to install the newest (3.0.3-0), but this one doenst work, can not boot into it.
please help
Best is to fastboot flash old OOS 2 recovery
Then, with it, flash the 2.2.3. Reboot. then Flash 3.1.4. with the recovery
First you need to flash official oxygen os recovery for android 5.1 lollipop https://s3.amazonaws.com/oxygenos.oneplus.net/OPX_recovery.img Now you will be able to boot the phone. Now download and copy oxygen os 3.1.4 to internal memory http://downloads.oneplus.net/devices/oneplus-x/ Reboot into recovery and flash the rom.
Aftrr successful flash of oos3 boot into fastboot and flash latest twrp from twrp website.. This time it should work.
thanks, it work with the costum recovery.
on 3.1.4 i installed a slightly older twrp form sparkfire (3.0.2 i think), rooting and installing xposed worked fine though.
is it important to have the latest twrp?
and another question. at some point in my hours long struggel with updating my opx i softbricked it. i guess my bootloader was locked and i tried to install another recovery. i expected it to be still unlocked from my first rooting months ago. when does the bootloader lock?
dooglrig said:
thanks, it work with the costum recovery.
on 3.1.4 i installed a slightly older twrp form sparkfire (3.0.2 i think), rooting and installing xposed worked fine though.
is it important to have the latest twrp?
and another question. at some point in my hours long struggel with updating my opx i softbricked it. i guess my bootloader was locked and i tried to install another recovery. i expected it to be still unlocked from my first rooting months ago. when does the bootloader lock?
Click to expand...
Click to collapse
It is always recommended to use latest (bugs free)
You can use this one https://dl.twrp.me/onyx/twrp-3.0.3-0-onyx.img latest as of now. And no u didn't brick ur phone. U flashed a new twrp for old bootloader version. Thts y u got stuck with oneplus logo. Its all oneplus things. Its always preferred to use stock recovery for updating bootloader which is safe. Check your bootloader state by giving this cmds "fastboot oem device-info"
cva_kabil said:
It is always recommended to use latest (bugs free)
You can use this one https://dl.twrp.me/onyx/twrp-3.0.3-0-onyx.img latest as of now. And no u didn't brick ur phone. U flashed a new twrp for old bootloader version. Thts y u got stuck with oneplus logo. Its all oneplus things. Its always preferred to use stock recovery for updating bootloader which is safe. Check your bootloader state by giving this cmds "fastboot oem device-info"
Click to expand...
Click to collapse
Hmm isnt that for new BL as well ?
NielDK said:
Hmm isnt that for new BL as well ?
Click to expand...
Click to collapse
Yes it is. OP said that he's on OOS 3.1.3, so already on the new BL.