Hey guys,
I just tried to root my Acer Iconia One 10 B3-A20 (not A3-A20!!!) with Kingsroot and it kinda worked. I could grant root access to apps and modify some stuff, but unfortunately after debloating something went wrong and my tablet is in a bootloop. I performed a hardreset so I could start from the beginning. After completing the android set up I was thrown instantly to another bootloop. After some researches I tried to do the android set up but without the last step and I installed another launcher via playstore and email. Afterwards I could start and do whatever I want to do. Unluckily I'm again in an bootloop after I did a restart. I can't enter the android set up procedure anymore and can't install any apps from the playstore.
Right now I can do following:
- I can access the download mode and try to do something with adb, BUT I'm unauthorized and can't tick the USB debugging think as you can imagine
- Try to flash something via recovery, but untill now I could not flash anything
Does anybody have a suggestion? Stock recovery is still accessible, but somehow I can't flash anything.
Hope anybody can help me out.
Thanks in advance. Best Regards,
GerasVille
EDIT: It's solved and the thread can be closed.
Thanks to Shreps I could flash the stock firmware via stock recovery. Here is his post.
GerasVille said:
Hey guys,
I just tried to root my Acer Iconia One 10 B3-A20 (not A3-A20!!!) with Kingsroot and it kinda worked. I could grant root access to apps and modify some stuff, but unfortunately after debloating something went wrong and my tablet is in a bootloop. I performed a hardreset so I could start from the beginning. After completing the android set up I was thrown instantly to another bootloop. After some researches I tried to do the android set up but without the last step and I installed another launcher via playstore and email. Afterwards I could start and do whatever I want to do. Unluckily I'm again in an bootloop after I did a restart. I can't enter the android set up procedure anymore and can't install any apps from the playstore.
Right now I can do following:
- I can access the download mode and try to do something with adb, BUT I'm unauthorized and can't tick the USB debugging think as you can imagine
- Try to flash something via recovery, but untill now I could not flash anything
Does anybody have a suggestion? Stock recovery is still accessible, but somehow I can't flash anything.
Hope anybody can help me out.
Thanks in advance. Best Regards,
GerasVille
EDIT: It's solved and the thread can be closed.
Click to expand...
Click to collapse
How you flash zip thru recovery? I geting error if i thry to flash xposed.
mcvisster said:
How you flash zip thru recovery? I geting error if i thry to flash xposed.
Click to expand...
Click to collapse
Hello, need help whith
I also had problems with kingroot, and decided to reset tablet "factory default".
The tablet would not start, loop on the logo. I saw this post, and download the "OS" official Acer ICONIA ACER ONE 10 B3-A20 and install it from a sd card and stock recovery.
Everything went well, the tablet starts asking me choose language, wifi network and login with google account I had before the reset. And here is the problem: I was not which account google it had before the reset, the tablet is 2nd hand and do not know how to solve this.
there any way you can skip this protection?
It is possible to flash a rom with spflash clean and able to put a new google account?
I'm bored to seek and find nothing.
Thanks in advance
similar problem
i rooted my iconica b3 a20 with kingroot and then it tried to update,now it just boots into recovery and says system fail due to modified files cause i used an app to adjust my processor speeds any idea how i can fix this or flash stock rom?
comagrun said:
Hello, need help whith
I also had problems with kingroot, and decided to reset tablet "factory default".
The tablet would not start, loop on the logo. I saw this post, and download the "OS" official Acer ICONIA ACER ONE 10 B3-A20 and install it from a sd card and stock recovery.
Everything went well, the tablet starts asking me choose language, wifi network and login with google account I had before the reset. And here is the problem: I was not which account google it had before the reset, the tablet is 2nd hand and do not know how to solve this.
there any way you can skip this protection?
It is possible to flash a rom with spflash clean and able to put a new google account?
I'm bored to seek and find nothing.
Thanks in advance
Click to expand...
Click to collapse
How to you flash the zip file? When i try to update from SDCard in the recovery, it can't locate the file. Thanks for your help.
ss7588 said:
How to you flash the zip file? When i try to update from SDCard in the recovery, it can't locate the file. Thanks for your help.
Click to expand...
Click to collapse
same here, you found ? when i go to update from SD it opens me a folder list, dunno if it's showing internal SD or external SD.
Maybe this will help. Read the whole post. https://forum.xda-developers.com/showpost.php?p=73606355&postcount=32
Hello together!
Does anyone still have an Stock Image for Acer Iconia 10 B3-A20 for the SPFlash? I could not make a backup of the device and flashed the wrong device image (was too tired :/ ).
Would appriciate that.
Kind regards!
Related
Hello
I hope someone can help me with this.
This is the first time I'm trying to install a new rom and had a problem. Now my phone doesn't start anymore. It hangs on the htc logo screen.
I'm trying to install the rom from the following link:
http://forum.xda-developers.com/showthread.php?t=2027304
WHat I did is :
Used all in one htc one x plus utitlity and flashed the boot.img found in the link.
After this the phone started to hang.
Now I wantot install the rom and gapp file but I don't have that in my phone yet.
I went to mount > mount usb storage in order to used adb push to put the zip files inside my phone but I get an error message saysing "device not found"
What can I do from here? please let me know what to do.
Thank you
cpu2007 said:
Hello
I hope someone can help me with this.
This is the first time I'm trying to install a new rom and had a problem. Now my phone doesn't start anymore. It hangs on the htc logo screen.
I'm trying to install the rom from the following link:
http://forum.xda-developers.com/showthread.php?t=2027304
WHat I did is :
Used all in one htc one x plus utitlity and flashed the boot.img found in the link.
After this the phone started to hang.
Now I wantot install the rom and gapp file but I don't have that in my phone yet.
I went to mount > mount usb storage in order to used adb push to put the zip files inside my phone but I get an error message saysing "device not found"
What can I do from here? please let me know what to do.
Thank you
Click to expand...
Click to collapse
Which version of the phone do you have? Sounds like the INTL one to me. You can still follow my tut here to get your rom and gapp's on your phone to flash.
Good luck
Maybe a silly question, but, do you have the windows drivers installed for the phone?
Clonz said:
Which version of the phone do you have? Sounds like the INTL one to me. You can still follow my tut here to get your rom and gapp's on your phone to flash.
Good luck
Click to expand...
Click to collapse
Thank you for the quick reply.
I managed to make it work.
Basically it seems like the phone takes time to get recognised by my system, is this normal?
After mounting the usb storage from recover and plugging the usb, when I used adb push, it says device not found.
After a minute, I used the command line again and it worked.
I pushed both the rom and gapps.zip file and installled them and now it's working.
My question now is: I had apps, messages,calls and contacts - is it possible to get them from the backup as well as keep this rom that I've just installed?
PS : is not connecting to the wifi, stating that there are authentication problem, is this normal?
Thank you
Can someone tell me if the wifi connection is an issue with this phone when intalling the rom mentioned earlier.
I had apps and other stuff on my phone, I can still see their respective folders, can I restore my apps back?
ps: I made a full backup of my official rom, I wanted to restore it back and this is what I've done:
Wiped system,dalvik,cache and factory
then restored all three partitions of my backup.
It turns on but it keeps hanging on the htc one logo
what can I do in this case?
Thank you
cpu2007 said:
Can someone tell me if the wifi connection is an issue with this phone when intalling the rom mentioned earlier.
I had apps and other stuff on my phone, I can still see their respective folders, can I restore my apps back?
ps: I made a full backup of my official rom, I wanted to restore it back and this is what I've done:
Wiped system,dalvik,cache and factory
then restored all three partitions of my backup.
It turns on but it keeps hanging on the htc one logo
what can I do in this case?
Thank you
Click to expand...
Click to collapse
I could be completely wrong but you might have to flashed the boot.img from your backup? did you flash a boot.img from a custom rom? TWRP won't flash boot.img properly so it has to be done in the bootloader.
Hope this sheds some light on your issue
Cheers!
When we make the backup, TWRP doesn't create a boot image file,at least not explicitly.
The file with the name "boot" have md5 and win extension.
I thought the same thing, that probably I need to flash the boot.image file as I did flash a custom boot before installing cm10.
So where is the boot.img file for my stock? how can I extract it?
gud day devs.
Ive root my device using vroot.exe using my desktop then install MT6582 repartition.apk(which I found on somewhere in my facebook groups)
then, tap the 1.5gb internal storage and reboot it into stock recovery mode. Then, I select to wipe/factory reset. After that Ive been stuck in android robot with something electricity on its belly.
Can anyone help me to fix this? :crying:
Ive tried to install CWM via SP Flash tool to create back up and restore but it doesnt work.
I tried also to wipe/factory reset on CWM but still not working.
This device is newly released here in PH. So thats why, I cant find any stock rom as of now.
Sorry for my bad english
Same problem here, did you already fix yours?
uopuh7 said:
gud day devs.
Ive root my device using vroot.exe using my desktop then install MT6582 repartition.apk(which I found on somewhere in my facebook groups)
then, tap the 1.5gb internal storage and reboot it into stock recovery mode. Then, I select to wipe/factory reset. After that Ive been stuck in android robot with something electricity on its belly.
Can anyone help me to fix this? :crying:
Ive tried to install CWM via SP Flash tool to create back up and restore but it doesnt work.
I tried also to wipe/factory reset on CWM but still not working.
This device is newly released here in PH. So thats why, I cant find any stock rom as of now.
Sorry for my bad english
Click to expand...
Click to collapse
-Same problem here and phone model, did you already fixed your phone?
Hey all
I am considering purchasing RCA Pro 10 tablet that runs Android 4.4. From the research I did on XDA for it I was able to find that it can be rooted using Kingo. But I couldn't find any mention of a custom recovery that can support it. As you know we need the custom recovery to flash ROMs and such. Anyone know of any custom recovery that will work with this tablet?
Thanks
it hasent been rooted yet the 4.4 one which is the one walmart had on black friday is differen t some how then the orginal the connectors are in different places and the modle number is different kingo does not work
I rooted mine but it was a jumbled mess of a process. First install SuperSU, then install and run iroot, afyer that using pdanet drivers plug it into your computer and use kango, open SuperSu and update your binary, finally use a root browser and remove the app iroot installed. Iroot installs the su binary but doesnt set anything up properly, kango will set everything up but cant install the files needed for some reason so you have to use them together. Its messy but it works.
I got 2of the new of the rca pro 10 edition with the 1.5 GHz quad core m/n rct6203w46 the easyist way to root it is plug it in your PC let it download the drivers download pdanet on your PC see if there's more drivers 4 it download Kingo root set tab to USB debuging open kingo root plug in tab to USB kingo root will find it click root it will go through a few steps it will ask if u have a special kernal choose other opt it will restart tab few times and it will say its rooted and install super su if not click root again then it should be rooted restart tab after it says rooted keep attached to PC it will say root status yes then should be 2 options remove root and root again hope this helps you guys who bought the new one on black Friday big plus it never deleted Aney apps app data pics music ect and you don't need SD chip for it ... as far as a custom kernal / recovery i have no idea sorry regarden that
I have my Pro10 RCT6203W46 rooted and have TWRP installed as custom recovery. Here is a link to another thread that may help: http://forum.xda-developers.com/showpost.php?p=57437408&postcount=113
Droidify said:
I have my Pro10 RCT6203W46 rooted and have TWRP installed as custom recovery. Here is a link to another thread that may help: http://forum.xda-developers.com/showpost.php?p=57437408&postcount=113
Click to expand...
Click to collapse
Cab you elaborate on how you got TWRP installed? I have it rooted via Kingo Root!
Thanks
Sargeue said:
Cab you elaborate on how you got TWRP installed? I have it rooted via Kingo Root!
Thanks
Click to expand...
Click to collapse
Sargeue,
Using the link I supplied, I downloaded (using my PC) the TWRP image from the last link PaTF provided. I copied the TWRP image over to my tablet. Then using the link mexicandroid provided to the Rashr flash tool on Google Play, I installed it and followed the instructions in the app to flash the TWRP image to my tablet and voila!, I had a custom recovery.
I can also verify everything works in TWRP, such as backup and restore, wipe menu, etc. No custom ROMS available that I know of, so did not try to flash any ROM.
Of note: If you allow an update to the RCA firmware, you will need to re-flash TWRP as the firmware update overwrites the custom recovery.
Hope this helps.
Droidify said:
Sargeue,
Using the link I supplied, I downloaded (using my PC) the TWRP image from the last link PaTF provided. I copied the TWRP image over to my tablet. Then using the link mexicandroid provided to the Rashr flash tool on Google Play, I installed it and followed the instructions in the app to flash the TWRP image to my tablet and voila!, I had a custom recovery.
I can also verify everything works in TWRP, such as backup and restore, wipe menu, etc. No custom ROMS available that I know of, so did not try to flash any ROM.
Of note: If you allow an update to the RCA firmware, you will need to re-flash TWRP as the firmware update overwrites the custom recovery.
Hope this helps.
Click to expand...
Click to collapse
Great, will try it out. Really don't need custom rom, just like having nandroid backup. Thanks for you help!
Perfect! Worked great, easiest recovery I installed to this date. Thanks for your help again Droidify.
Thanks to the thread maker. I knew a lot with this thread.
Thanks
Thanks to Patf for posting the files, Sargeue for asking Droidify to elaborate, and Droidify for elaborating I was able to do this with no problem. This wasn't my first time rooting, and I've flashed a cfw that already had a custom recovery on it which rooted a device( don't know if thats particularly considered rooting), but I think this was the first time I flashed a custom recovery. The TWRP recovery boots just fine how it should and everything works if the instructions are followed. Thanks a bunch guys. I had already got an update prior to this and I am not sure nor do I remember what it exactly was. Its the only update I've got since I had the tablet. I still attempted this, so it was risky, but never the less everything went fine.
Hi all! I somehow soft bricked my RCA tab after updating to an OTA. Anyone have a nandroid backup of the stock ROM? Thanks!
Same problem here. OTA update screwed it up looking for help.
RCA RCT6203W46 1.9.50 firmware upgrade failures
Below is the method I found to resolve the issue I had with the most recent firmware upgrade failing. Use at your own risk.
How to resolve RCA RCT6203W46 1.9.50 firmware upgrade failures (this should also unbrick your device provided you can access stock recovery):
1. Place these 1.3.51 and 1.9.50 update zip files on your external sdcard. If you can only boot into recovery, you will need to eject the sdcard and use an alternative method to transfer these files from your PC to the sdcard and then place the card back into your tablet.
2. Boot into stock recovery. You can do this from a powered off state by simultaneously depressing the power and volume buttons until the white RCA boot screen appears. Once this screen appears, release the power button but REMAIN DEPRESSING THE VOLUME BUTTON until you are in recovery.
3. Select: Wipe cache partition. (use the volume button to move selection up or down, press the power button to make selection)
*Factory reset wipes cache too in step 4, but I am cautious.
4. Select: Wipe data/factory reset. Warning: you will lose any app you had installed.
5. Select: apply update from sdcard. Select the 1.3.51 zip file. Allow it to complete.
6. Select: apply update from sdcard. Select the 1.9.50 zip file. Allow it to complete.
7. Select: reboot system now.
8. Enjoy your upgraded RCA RCT6203W46 once again!
Probable causes for issue:
Rooted system (forgot to unroot prior to upgrade)
Removed or froze any stock app (including Vudu, Walmart, etc)
Modified a system file (build.prop, etc)
Bad luck
installation aborted...
Hello! I just did this guide but it didn't work. I always get Installation Aborted with Step 5 and Step 6 both of them are Aborted. I followed carefully your guide but still no good for my tab. I uploaded the two installation aborted message from android recovery. The first photo is when i update the firmware 1.3.51.zip and the second photo is installation aborted too when i update the firmware to 1.9.50.zip... Please see those photos if you can see what it made to abort the installation process. I hope you can help Droidify. And also, when i rooted my tab pro 10, i only remove the Vudu app and another app that was included but not the Walmart app...
Did not work for me...
Droidify said:
Below is the method I found to resolve the issue I had with the most recent firmware upgrade failing. Use at your own risk.
How to resolve RCA RCT6203W46 1.9.50 firmware upgrade failures (this should also unbrick your device provided you can access stock recovery):
1. Place these 1.3.51 and 1.9.50 update zip files on your external sdcard. If you can only boot into recovery, you will need to eject the sdcard and use an alternative method to transfer these files from your PC to the sdcard and then place the card back into your tablet.
2. Boot into stock recovery. You can do this from a powered off state by simultaneously depressing the power and volume buttons until the white RCA boot screen appears. Once this screen appears, release the power button but REMAIN DEPRESSING THE VOLUME BUTTON until you are in recovery.
3. Select: Wipe cache partition. (use the volume button to move selection up or down, press the power button to make selection)
*Factory reset wipes cache too in step 4, but I am cautious.
4. Select: Wipe data/factory reset. Warning: you will lose any app you had installed.
5. Select: apply update from sdcard. Select the 1.3.51 zip file. Allow it to complete.
6. Select: apply update from sdcard. Select the 1.9.50 zip file. Allow it to complete.
7. Select: reboot system now.
8. Enjoy your upgraded RCA RCT6203W46 once again!
Probable causes for issue:
Rooted system (forgot to unroot prior to upgrade)
Removed or froze any stock app (including Vudu, Walmart, etc)
Modified a system file (build.prop, etc)
Bad luck
Click to expand...
Click to collapse
First of all Thank You for trying to help, you are doing more that Walmart & RCA combined.
I followed your instructions and this process did not work for me. I have attached pictures of my screen after using both zip files...
Also I only rooted the tablet using Kingo I didn't remove any system apps
I think a key difference in my case is that I had TWRP installed and was able to boot into the system and unroot, install stock recovery, and then perform this procedure. Seems like you guys never had TWRP installed as recovery. I have a couple other tricks I am working on, but be patient as I vet them and see if something might work. Sorry this didn't work for you guys!
Any updates on this?
Droidify said:
I think a key difference in my case is that I had TWRP installed and was able to boot into the system and unroot, install stock recovery, and then perform this procedure. Seems like you guys never had TWRP installed as recovery. I have a couple other tricks I am working on, but be patient as I vet them and see if something might work. Sorry this didn't work for you guys!
Click to expand...
Click to collapse
No didn't use TWRP.
My tab is only 20 days old & still under warranty so I'm just going to send it back to RCA.
Was hoping to fix it myself so I wouldn't have to wait 4-6 weeks.
PHug said:
No didn't use TWRP.
My tab is only 20 days old & still under warranty so I'm just going to send it back to RCA.
Was hoping to fix it myself so I wouldn't have to wait 4-6 weeks.
Click to expand...
Click to collapse
Unfortunately, I'm boned as far as returning it goes because rooting voids your warranty.
PHug said:
No didn't use TWRP.
My tab is only 20 days old & still under warranty so I'm just going to send it back to RCA.
Was hoping to fix it myself so I wouldn't have to wait 4-6 weeks.
Click to expand...
Click to collapse
Well then there is no sense for me to keep trying to resolve this considering I have no way to test fixes, especially if what I posted resolved my particular case. I did send someone a test to try and if that is successful I will share, but outside of that I tried guys.
I guess the lesson learned here is that we all have to remember to unroot and not delete the apps that came with the device, only freeze them using Titanium or similar and unfreeze them before updating.
Hi guys!
Today I rooted my tablet (Android 4.2.2), but unfortunately I deleted some Google Apps so I decided to bring back factory settings. After that I always get "Setup Wizard stopped working" and can't get through it.
I can't even go to settings.
Can you help me?
Thanks!
FYI: Factory reset doesn't bring back deleted apps. You will have to restore your tablet with the original firmware or if you have a custom recovery like TWRP, then you might able to reinstall the missing apps that way. Without more details on what kind of tablet, we can't provide more detailed assistance.
My tablet is Lifetab (Lenovo) E10320.
I tried to install GApps for 4.2.2 (zip file) through recovery mode (I don't have TWRP installed) but after few seconds from start I get "Installation aborted".
E: Any ideas?
Gapps will only work through a custom recovery. Very unlikely that a random Gapps package would even work for stock software. Generally it doesn't. If you don't have a custom recovery, then you will need to restore your tablet to stock with whatever tool and firmware Lenovo has for that. This would be the easiest, best way to complete this task anyway.
http://www.arctablet.com/blog/forum...manufacturers/rom-aldi-medion-lifetab-e10320/
You might check that forum out. I'm sure they have a lot more knowledge about these devices then most people here on XDA are going to have.
Phone: LG Aristo MS210 (Metro PCS)
Bootloader: TWRP 3.0.3.0
So let me explain. I was just figuring out how to root the LG Aristo since I had never done it with a custom ROM. Yes, true story. Anyway, I was happy I got it working perfectly until I rebooted my phone. When I rebooted it, SuperSU was gone. I tried going to the play store and redownloading it, but I got an error code -504, and the thing is, I couldn't download any apps. ANY. I decided to look the error code up and I can't find anything on it. I tried multiple times doing multiple different things. From factory resetting, reflashing SuperSU, to factory resetting and then flashing SuperSU, wiping dalvik-cache along with everything except for system. It didn't work and I thought I could get it working.. Well... this next part I really messed up on. I decided to wipe everything. I selected all options and slid the cursor and it failed. The wipe failed. It said "E: /sdcard1 unable to partition" or something like that. I noticed that when I was wiping earlier the internal storage was also called that, and the funny thing is I have no microSD card in my phone. So. :/
Now when I boot I'm stuck on the LG splash screen and nothing else happens. I tried recovery mode (without ADB) with the power button + vol down key as I read here: (I'd post link but I'm a new member) that's how you get into recovery/factory reset. I'd use ADB to get into recovery, but since I just wiped the system, I don't have USB debugging enabled. I tried anyway and I gotta say this is my worst nightmare as I'm too young to get a job, (15 yrs. old) so I can't get a phone. :/ Oh, and if this can be useful: I know it connects to my PC over USB because I hear the sound it makes when a new device is connected. Is there any way I can use that to unbrick it?
EDIT 9/10/2017 9:31 PM (Eastern Time): I managed to get into twrp. I'm currently looking online for how to flash android 7.0 nougat (OS it originally had)
RyokoOnXDA said:
Phone: LG Aristo MS210 (Metro PCS)
Bootloader: TWRP 3.0.3.0
So let me explain. I was just figuring out how to root the LG Aristo since I had never done it with a custom ROM. Yes, true story. Anyway, I was happy I got it working perfectly until I rebooted my phone. When I rebooted it, SuperSU was gone. I tried going to the play store and redownloading it, but I got an error code -504, and the thing is, I couldn't download any apps. ANY. I decided to look the error code up and I can't find anything on it. I tried multiple times doing multiple different things. From factory resetting, reflashing SuperSU, to factory resetting and then flashing SuperSU, wiping dalvik-cache along with everything except for system. It didn't work and I thought I could get it working.. Well... this next part I really messed up on. I decided to wipe everything. I selected all options and slid the cursor and it failed. The wipe failed. It said "E: /sdcard1 unable to partition" or something like that. I noticed that when I was wiping earlier the internal storage was also called that, and the funny thing is I have no microSD card in my phone. So. :/
Now when I boot I'm stuck on the LG splash screen and nothing else happens. I tried recovery mode (without ADB) with the power button + vol down key as I read here: (I'd post link but I'm a new member) that's how you get into recovery/factory reset. I'd use ADB to get into recovery, but since I just wiped the system, I don't have USB debugging enabled. I tried anyway and I gotta say this is my worst nightmare as I'm too young to get a job, (15 yrs. old) so I can't get a phone. :/ Oh, and if this can be useful: I know it connects to my PC over USB because I hear the sound it makes when a new device is connected. Is there any way I can use that to unbrick it?
EDIT 9/10/2017 9:31 PM: I managed to get into twrp. I'm currently looking online for how to flash android 7.0 nougat (OS it originally had)
Click to expand...
Click to collapse
Hi,
Well the only way to fix this is that u need to be able to boot into recovery.
If u tried booting into recovery by holding the power and vol+/- and u end up booting to the boot logo, then recovery is also wiped.
In this case, u will need to check if u have access to fastboot. If so then obtain the twrp recovery for ur device and flash it then tried booting into recovery using the appropriate keys.
When I get time, I will research ur device for any recovery tool and stuff.
Sent from my ONE A2005 using Tapatalk
Brandon Indar said:
Hi,
Well the only way to fix this is that u need to be able to boot into recovery.
If u tried booting into recovery by holding the power and vol+/- and u end up booting to the boot logo, then recovery is also wiped.
In this case, u will need to check if u have access to fastboot. If so then obtain the twrp recovery for ur device and flash it then tried booting into recovery using the appropriate keys.
When I get time, I will research ur device for any recovery tool and stuff.
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
I managed to get into recovery. I don't know how to flash Android 7.0 for my Aristo, though.. so I'm researching it.
EDIT: Got a ROM flashed. Everything working now.
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
King smus said:
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
Click to expand...
Click to collapse
Sent from my LGE LM-X220 using XDA Labs