Related
Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
ergotelis said:
Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
Click to expand...
Click to collapse
You'll probably need to flash a new recovery partition. Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1950307
RaiderDuck said:
You'll probably need to flash a new recovery partition. Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1950307
Click to expand...
Click to collapse
Thanks, but the problem is that this guy can get into the recovery with powering up+holding volume down button, if i understood well.but I can't!
ergotelis said:
Thanks, but the problem is that this guy can get into the recovery with powering up+holding volume down button, if i understood well.but I can't!
Click to expand...
Click to collapse
flasing a recovery is done via fastboot so you don't have to enter recovery but fastboot (hold power and volume down till it shows fastboot, then press up) .
look at this post: http://forum.xda-developers.com/showpost.php?p=33137046&postcount=10
Fix
ergotelis said:
Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
Click to expand...
Click to collapse
hello i had this problem yesterday, it happens in neutrino rom to alot of people!
and btw i could not open recovery either
ill explain what i had to do
i had to use moto-fastboot and install a new recovery, basically your recovery is dead and your rom is unbootable
heres the steps
download the moto drivers and install
http://forum.xda-developers.com/attachment.php?attachmentid=1381183&d=1349549067
then download the motofastboot zip http://forum.xda-developers.com/attachment.php?attachmentid=1381414&d=1349555102
and create a new folder in C: (computer) called Android and then drag the files from the moto zip into android
Then download a new recovery http://www.mediafire.com/?6ww8wrjrdqq9m97
place the recovery.img into the android folder
now you have all the files needed to reflash your new recovery and fix your phone the whole idea is to reinstall recovery so you can access it and wipe and install the rom fresh again
now you need to do these steps
1) Attach your phone to the PC via USB (use a port closest to the power supply)
2) Reboot phone while holding volume down until you see "fastboot"
3) Press volume up to initiate fastboot
4) On your PC click the Start menu, then in the search box type "cmd"
5) In the command prompt type the following commands (no quotes, hit enter after each command)
6a) "cd c:/android"
6b) "moto-fastboot devices"
your CMD promt should show something like this
C:\Users\Me>cd c:/android
c:\Android>fastboot devices
TA20703SX9 fastboot
c:\Android>
now if that has all worked type the following phrases
moto-fastboot erase recovery
moto-fastboot flash recovery recovery-clockwork-6.0.1.4-maguro.img
moto-fastboot reboot
now the phone should reboot, unplug the usb and pull battery out.
put battery back in and then try to boot into recovery like you normally would (power button + Vol Down)
and your new recovery should load!
from here you can wipe your whole system which i would reccomended as your current one is corrupt and install a new rom or reflash your current on onto a clean wipe. if you dont understand how to clean wipe do all of these steps, factory reset, clear cache, clean dalvik cache then go to mounts > storage and format data + format cache + format system
now install new rom and let it boot up, should bootloop a couple of times then start! if not unplug battery from phone and ask for further assitance
Pixelguy said:
1) Attach your phone to the PC via USB (use a port closest to the power supply)
2) Reboot phone while holding volume down until you see "fastboot"
3) Press volume up to initiate fastboot
Click to expand...
Click to collapse
Thank you for your help, the problem is exactly here, i put on the usb, i power up the phone by pressing the volume down, and the phone does nothing,doesn't show the fastboot,and after 10-15 secs starts rebooting again. This is my problem!
The only response from my phone is when powering up, and pressing the volume up, it says "starting rsd protocol support"
Is there any case that my volume down is dead?
ergotelis said:
Thank you for your help, the problem is exactly here, i put on the usb, i power up the phone by pressing the volume down, and the phone does nothing,doesn't show the fastboot,and after 10-15 secs starts rebooting again. This is my problem!
The only response from my phone is when powering up, and pressing the volume up, it says "starting rsd protocol support"
Is there any case that my volume down is dead?
Click to expand...
Click to collapse
unplug usb
remove battery, then put battery back in make sure phone off (no green light)
then hold power button and vol down at the same time for a few seconds
Fastboot should appear in white writing then press up volume and it should say starting rsd protocal or something similiar
then plug in usb and follow the steps i have written above
i do exactly what you said, but doesn't show fastboot. from switched off, if i press volume up with power button, i see the message "starting rsd protocol support" .but no fastboot option!
Is there any chance that you can access adb after bootscreen? than you can use "adb reboot recovery" to get there...
jorno88 said:
Is there any chance that you can access adb after bootscreen? than you can use "adb reboot recovery" to get there...
Click to expand...
Click to collapse
When i start up phone, the only combination possible to stop restarting is by pressing power+vol up to show that with RSD. There is no other option then selectable. Power + volume down does not work, doesn't show anything, has anyone of you experienced this thing?
If the only working option you have is RSD, then I'm afraid you're stuck with having to flash a stock SBF. I hope you know/remember exactly what stock version you had installed before any modding or flashing, because the SBF has to match exactly. Choose wisely and read up as much as you can before flashing.
I have over a year now with custom roms, and i can't remember which version i had. Why do i have to find exactly the version that i had? The latest stock version won't work with rsd? It will make it hard brick?If i manage at least to recover the fastboot menus etc it would be great!
I will later also try to open it, to see if the side button "volume down" is not working,.
I have another question, in your moto atrix, if you press on startup power+vol up, are you also seeing the "starting RSD" etc option??
ergotelis said:
I have over a year now with custom roms, and i can't remember which version i had. Why do i have to find exactly the version that i had? The latest stock version won't work with rsd? It will make it hard brick?If i manage at least to recover the fastboot menus etc it would be great!
Click to expand...
Click to collapse
Yes, flashing a wrong SBF will most likely hardbrick your device.
ergotelis said:
I have another question, in your moto atrix, if you press on startup power+vol up, are you also seeing the "starting RSD" etc option??
Click to expand...
Click to collapse
Can't try right now, but as far as I know, yes, that is a standard way to enter RSD mode.
thank you, so, i know that at least my phone responds to some instructions.
Is there anyone else to suggest me to do anything else?
IN rsd mode, (other than flashing a stock random rom with chance of hardbricking,)the phone can be read by usb, can i do anything there?
ergotelis said:
IN rsd mode, (other than flashing a stock random rom with chance of hardbricking,)the phone can be read by usb, can i do anything there?
Click to expand...
Click to collapse
Sadly no. The RSD mode can only ever be used to flash SBFs. That's it. Nothing less, nothing more.
I will now try to open it to see if vol down is not working well. If it does work, i will select a stock rom 1 year old and i will flash it using rsd, and whatever happens....:good:
I disassembled the phone, the button seems to operate fine(?).
I flashed with RSDlite the 2.3.6 version, the RSD stuck to waiting for phone to restart.
The phone restarted, the "unlocked" logo disappeared.
Starts normally, passes the red motorola logo, shows the graphic of AT&T, and after ~10sec starts restarting again. Bootloop again!
At boot, pressing power+vol up, i can still get the RSD support. Pressing power+vol down does nothing, I don't see any error messages, like the ones in hard brick.
What can i do now, any ideas please!!!
try this
ergotelis said:
I disassembled the phone, the button seems to operate fine(?).
I flashed with RSDlite the 2.3.6 version, the RSD stuck to waiting for phone to restart.
The phone restarted, the "unlocked" logo disappeared.
Starts normally, passes the red motorola logo, shows the graphic of AT&T, and after ~10sec starts restarting again. Bootloop again!
At boot, pressing power+vol up, i can still get the RSD support. Pressing power+vol down does nothing, I don't see any error messages, like the ones in hard brick.
What can i do now, any ideas please!!!
Click to expand...
Click to collapse
Yesterday I had a hard time getting my phone into fastboot mode, after loading a bad SV kernel,it only wanted to start the RSD protocol mode. I eventually got into fastboot by plugging into the wall charger, then removing and installing the battery while holding the vol button. When fastboot appears, unplug the charger to allow sd access.
Thanks for the suggestion, i tried even this,it didn't work. The funny thing is that it shows the battery charging level full screen if i connect the charger, as it starts.
I noticed also that when i press vol down now, it takes longer to start and continue to the moving red logo, it stays for a while stable red,feels like it is thinking whether to start or not lol (if i don't press vol down, on the power up the red moto logo immediately starts the classic "waving" effects)
Anyone having any kind of suggestion?I guess you don't, right?
my xperia device is stuck on the sony logo. wont pass that part. doesn't go into flashmode or fastboot, nothing. what can I do plz I need help. cant use flashmode on the pc as the computer never recognizes the phone bcuz it doesn't go into fastboot mode.
If your phone even starts, then fastboot and flashmode should work just fine. What's the last thing you did before it wouldn't boot?
1. Hold VOL UP while plugging it in the USB on your computer. The LED should get blue
2. Either use fastboot through command-line or use QuickIMG to boot a custom kernel with recovery.
3. Flash or restore a ROM
Klaos3000 said:
If your phone even starts, then fastboot and flashmode should work just fine. What's the last thing you did before it wouldn't boot?
1. Hold VOL UP while plugging it in the USB on your computer. The LED should get blue
2. Either use fastboot through command-line or use QuickIMG to boot a custom kernel with recovery.
3. Flash or restore a ROM
Click to expand...
Click to collapse
I was trying to unroot the phone to go back to stock and update to stock lollipop. the led lights don't light up anymore, holding volume up or down doesn't do anything as soon as I plug in the usb cable the screen comes on and it stays on the sony logo.
antrax360 said:
my xperia device is stuck on the sony logo. wont pass that part. doesn't go into flashmode or fastboot, nothing. what can I do plz I need help. cant use flashmode on the pc as the computer never recognizes the phone bcuz it doesn't go into fastboot mode.
Click to expand...
Click to collapse
Do the following exactly as outlined.
1- with the phone DISCONNECTED from your pc or charger, hold the power and up buttons until it vibrates and turns off.
2- open the flashtool and select an ftf to flash, and wait for the message that asks you to connect the phone in flash mode.
3- the phone must still be off. Hold the down button and connect the phone to the usb port in the pc. The flashing will start.
I tried that it goes back to the sony logo.
najoor said:
Do the following exactly as outlined.
1- with the phone DISCONNECTED from your pc or charger, hold the power and up buttons until it vibrates and turns off.
2- open the flashtool and select an ftf to flash, and wait for the message that asks you to connect the phone in flash mode.
3- the phone must still be off. Hold the down button and connect the phone to the usb port in the pc. The flashing will start.
Click to expand...
Click to collapse
I tried that. Doesnt work
antrax360 said:
I was trying to unroot the phone to go back to stock and update to stock lollipop. the led lights don't light up anymore, holding volume up or down doesn't do anything as soon as I plug in the usb cable the screen comes on and it stays on the sony logo.
Click to expand...
Click to collapse
How did you try to unroot? It's weird if you don't have working fastboot or flashmode, and without those, you're pretty much screwed. Those two should work even if you screw up big-time, like flashing a wrong kernel, but you must have done something weird if they stopped working?
And let me get this straight, you are pressing and HOLDING the volume buttons when you plug it to your computer, right? Make sure that the device is completely off by pressing and holding POWER + VOL UP. It'll vibrate a couple of times. Note that you're not supposed to be connected to the computer, since it'll then just boot again.
Then press and HOLD VOL UP for fastboot (blue LED), OR VOL DOWN for flashmode (green LED flashing shortly)
You probably already know these steps, but we have to make it absolutely certain that it's a hardware issue, and not an issue with the thing you do
Klaos3000 said:
How did you try to unroot? It's weird if you don't have working fastboot or flashmode, and without those, you're pretty much screwed. Those two should work even if you screw up big-time, like flashing a wrong kernel, but you must have done something weird if they stopped working?
And let me get this straight, you are pressing and HOLDING the volume buttons when you plug it to your computer, right? Make sure that the device is completely off by pressing and holding POWER + VOL UP. It'll vibrate a couple of times. Note that you're not supposed to be connected to the computer, since it'll then just boot again.
Then press and HOLD VOL UP for fastboot (blue LED), OR VOL DOWN for flashmode (green LED flashing shortly)
You probably already know these steps, but we have to make it absolutely certain that it's a hardware issue, and not an issue with the thing you do
Click to expand...
Click to collapse
I was going to flash the stock rom using flashtool right but everytime i tried to put the phone into fastboot mode it would go to the battery icon. At this point the phone was working fine. But no fastboot mode at all. Then i factory erased the phone through twrp. After that it doesnt boot up. Just sony logo no led lights. Even if i do vol up or down. Straight to the sony logo. Vol up plus power button, vibrates couple of times. I redo the process and it goes back to the sony logo.
antrax360 said:
I was going to flash the stock rom using flashtool right but everytime i tried to put the phone into fastboot mode it would go to the battery icon. At this point the phone was working fine. But no fastboot mode at all. Then i factory erased the phone through twrp. After that it doesnt boot up. Just sony logo no led lights. Even if i do vol up or down. Straight to the sony logo. Vol up plus power button, vibrates couple of times. I redo the process and it goes back to the sony logo.
Click to expand...
Click to collapse
The thing is that the screen shouldn't power on when you enter fastboot. The only thing that should go on is the blue LED. I don't use TWRP, and I don't know how it wipes stuff and if it only deletes user data, or if it formats the system. If it does the latter, then it literally wipes the system partition, making it empty, so if you ever format the system, you should flash a new ROM ASAP. A little late for that now though, but I'm still not convinced that fastboot isn't working.
ONE LAST TIME :laugh:
NOTE: The device should be disconnected from the computer.
1. Turn the device OFF by holding and pressing the POWER button and VOL UP. It should be disconnected from the computer by now. Got it? Nice.
2. Plug the USB-cable in the device first, since it's easier to plug it into the computer. Do not plug it into the computer yet. Only the Ultra.
3. Now HOLD VOL UP. Just hold it in.
4. Stick the USB cable, which is already inside your Ultra, to your computer WHILE still holding VOL UP.
5. The blue LED above the screen should light up now. The display should not power on or anything else. The blue LED is the only thing that should turn on.
Still nothing?
Klaos3000 said:
The thing is that the screen shouldn't power on when you enter fastboot. The only thing that should go on is the blue LED. I don't use TWRP, and I don't know how it wipes stuff and if it only deletes user data, or if it formats the system. If it does the latter, then it literally wipes the system partition, making it empty, so if you ever format the system, you should flash a new ROM ASAP. A little late for that now though, but I'm still not convinced that fastboot isn't working.
ONE LAST TIME :laugh:
NOTE: The device should be disconnected from the computer.
1. Turn the device OFF by holding and pressing the POWER button and VOL UP. It should be disconnected from the computer by now. Got it? Nice.
2. Plug the USB-cable in the device first, since it's easier to plug it into the computer. Do not plug it into the computer yet. Only the Ultra.
3. Now HOLD VOL UP. Just hold it in.
4. Stick the USB cable, which is already inside your Ultra, to your computer WHILE still holding VOL UP.
5. The blue LED above the screen should light up now. The display should not power on or anything else. The blue LED is the only thing that should turn on.
Still nothing?
Click to expand...
Click to collapse
I have windows 8. I remember i had a hard time trying to get it into fastboot first time i rooted and unlocked bootloader. Just dont remember what i did to get it working.
antrax360 said:
I have windows 8. I remember i had a hard time trying to get it into fastboot first time i rooted and unlocked bootloader. Just dont remember what i did to get it working.
Click to expand...
Click to collapse
Check whether the drivers have been properly installed in ur PC. If u can't get into flashmode try another system to flash the ftf. Procedure hold volume down while connecting the usb to plug. U will see a green led blink.
antrax360 said:
I have windows 8. I remember i had a hard time trying to get it into fastboot first time i rooted and unlocked bootloader. Just dont remember what i did to get it working.
Click to expand...
Click to collapse
Oh! You probably haven't installed fastboot on your computer. Download and install, and try again.
Klaos3000 said:
Oh! You probably haven't installed fastboot on your computer. Download and install, and try again.
Click to expand...
Click to collapse
Wooooohoooo phones alive jajaja. Thankssss. Though i got some more questions. First time i unlocked boatloader i was told to backup my TA files. what do i do with those now? I just flashed a stock c6806 unbranded rom. When i try to update the phone through settings it says it couldn't verify the update. i retried the process through sony companion app, and it says my phone is modded so it wont do anything.
antrax360 said:
Wooooohoooo phones alive jajaja. Thankssss. Though i got some more questions. First time i unlocked boatloader i was told to backup my TA files. what do i do with those now? I just flashed a stock c6806 unbranded rom. When i try to update the phone through settings it says it couldn't verify the update. i retried the process through sony companion app, and it says my phone is modded so it wont do anything.
Click to expand...
Click to collapse
The TA partition is where your DRM keys are. It's a good idea to backup those keys in case you want to revert to complete stock in the future, or when you need to send it in for repairs. Unlocking the bootloader will remove the keys, but since your device was - weirdly enough, already bootloader unlocked, I don't think you even had DRM keys to start with, which is again, very weird.
No biggie though. Gone is gone. The reason why PC Companion told you that it's been modified, is because you're rooted, and it knows it, so you'll have to unroot before you update. That's only if you're updating through official channels, but you have a second alternative; Flashtool. It allows you to flash stock Sony ROMs, or FTF-files.
But you're saying that you flashed a stock 6806 ROM now, and that's what? 5.0.2? Why don't you just download the .368-update (Android 5.1.1)? Then you'll be on the latest version.
Klaos3000 said:
The TA partition is where your DRM keys are. It's a good idea to backup those keys in case you want to revert to complete stock in the future, or when you need to send it in for repairs. Unlocking the bootloader will remove the keys, but since your device was - weirdly enough, already bootloader unlocked, I don't think you even had DRM keys to start with, which is again, very weird.
No biggie though. Gone is gone. The reason why PC Companion told you that it's been modified, is because you're rooted, and it knows it, so you'll have to unroot before you update. That's only if you're updating through official channels, but you have a second alternative; Flashtool. It allows you to flash stock Sony ROMs, or FTF-files.
But you're saying that you flashed a stock 6806 ROM now, and that's what? 5.0.2? Why don't you just download the .368-update (Android 5.1.1)? Then you'll be on the latest version.
Click to expand...
Click to collapse
I did unlock bootloader myself, TA file were backup. My phone is the 6806 model. The only ftf file i found on xda with a working link was for 4.2 jellybean. I just restored my TA files am going to reflash that stock rom and see what it says now.
antrax360 said:
I did unlock bootloader myself, TA file were backup. My phone is the 6806 model. The only ftf file i found on xda with a working link was for 4.2 jellybean. I just restored my TA files am going to reflash that stock rom and see what it says now.
Click to expand...
Click to collapse
Well carry on then! :laugh:
Klaos3000 said:
Well carry on then! :laugh:
Click to expand...
Click to collapse
Ill keep you posted thanks for replying though i really appreciate that.
Klaos3000 said:
Well carry on then! :laugh:
Click to expand...
Click to collapse
Phones fixed. I needed to restore my TA files in order to be fully stock. Thanks guys.
antrax360 said:
Phones fixed. I needed to restore my TA files in order to be fully stock. Thanks guys.
Click to expand...
Click to collapse
Nice!
Klaos3000 said:
Nice!
Click to expand...
Click to collapse
have my xperia z ultra same error that file will solve i dont know if my sony has unlock bootloader,
alright guys, so here's the story. just yesterday i bought a brand new lg v10, got it home and the first thing i did was root the device and used ADB to load TWRP following the instructions here on SDA to a T for the ROOT/RECOVERY setup. and it worked. all was fine and dandy, the first time i booted into TWRP via ADB after root i got in, flashed a debloated ROM + xposed and again, everything went fine.. loaded into the OS of the new ROM, went through setup, turned on USB debugging, clicked always allow this computer, installed xposed app yadayadayada. I then, using ADB again, loaded into TWRP. i created a backup there just in case something went wrong with the changes i was about to make and once the backup was complete i loaded back in to the OS. at this point i thought i had done everything right and was confident that if i made system changes that didn't work out i could just flash the phone with TWRP from the backup i made. right? WRONG! ...apparently... so anyways, i made my first change, which was to use a NONROOT app called texdroider or whatever to change my DPI (as i have done with a couple phones previously without much issue) but i didn't take into account that stupid second screen... making the DPI changes system wide, as i'm sure those of you that know this phone are aware, causes the systemUI to crash with an error.. making the OS unusable.. so i tried to load into TWRP by holding the volume down and power button.. but instead it just booted me to the factory recovery.. not TWRP... the phone is unusable within the OS, i can't get the phone to connect to adb to boot into twrp as i had previously, i can't seem to get the phone into download mode, and i can't boot to TWRP and the OS is junk at this point.. but it DOES say on the "LG" screen that the bootloader is unlocked so i'm really hoping i'm not completely out of luck.. but i am not sure what to do at this point. does anyone here know of anything i can try to get into a custom recovery at this point? if i could get into TWRP my SD card in the phone has a backup, the original image, not to mention i could pull the SD card and add anything i need via my pc and then boot back to twrp etc etc and i would have no issue fixing the phone... i really don't understand what i did wrong or why i can't boot to my custom recovery but i'm at a loss.. i'm just looking for a way to force the phone into a custom recovery... or restore the original factory image.. if you have any advice at all i would really appreciate it.
Thanks for reading
**UPDATE** this may or may not make things much easier... but I got download mode working!! so at least there's that, still no custom recovery and i'm currently looking for a KDZ or TOT file to flash via lg flash tool... hopefully that makes things easier..
When you say you got to the factory recovery, what was that, an Android on its side or something asking you to factory reset your device? If it was the factory reset screen, if you select yes and then yes, it will take you to TWRP if you have it installed. If you don't it will factory reset your device.
ngoblirsch said:
**UPDATE** this may or may not make things much easier... but I got download mode working!! so at least there's that, still no custom recovery and i'm currently looking for a KDZ or TOT file to flash via lg flash tool... hopefully that makes things easier..
Click to expand...
Click to collapse
To boot into recovery from power off, you hold volume down & power. When you see the LG logo release and press power while continuing to hold volume down. Then as said above, it come up as a factory reset, select yes each time, and it should boot into twrp, providing you installed it correctly.
Sent from my LG-H901 using Tapatalk
YrrchSebor said:
When you say you got to the factory recovery, what was that, an Android on its side or something asking you to factory reset your device? If it was the factory reset screen, if you select yes and then yes, it will take you to TWRP if you have it installed. If you don't it will factory reset your device.
Click to expand...
Click to collapse
it was a screen asking me to do a factory reset, i click yes, it asks to confirm, i click yes again and then it "successfully" factory resets my phone... it shows the android factory reset symbol that its resetting, then says that its "optimizing apps" and goes through that whole process.. but when it finally loads the "welcome" screen (so i know for a fact that some sort reset has taken place) i get the same "systemui has crashed" error and the OS is unusable and won't connect to my computer.. idk why i can't access TWRP.. i booted to it 3 times before this happened, though never by the hardware buttons on the phone.. everytime i booted to TWRP i had used ADB to boot to TWRP.. what makes me the most sad is that i have a nandroid backup on my SD card... but i can't flash it without recovery.. which i can't install on the phone without getting into the OS..
is there any way to install TWRP or even boot to a temporary TWRP so that i can do so? if i can flash my nandroid i'm saved.. if i can get into a custom recovery i'm saved.. if i can find a .kdz file to flash, i'm saved... if i can get my phone to be recognized by my computer/adb i'm saved.... there simply has to be a way to unbrick this phone...
ZDeuce2 said:
To boot into recovery from power off, you hold volume down & power. When you see the LG logo release and press power while continuing to hold volume down. Then as said above, it come up as a factory reset, select yes each time, and it should boot into twrp, providing you installed it correctly.
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
well i seem to have somehow NOT installed TWRP correctly because it just proceeds to factory reset my phone.. which for some odd reason doesn't reset the DPI... leaving me stranded... is there any way to get ADB to see my device in its present state? my computer makes the device recognition noise when i enter download mode and i can see it in device manager but not my computer or ADB
I've had this phone just over 2 months but I'm not positive, is download mode the same as the bootloader on this device? If so, fastboot commands should work, and you can flash TWRP again, or do 'fastboot boot TWRP_filename' and it will boot TWRP temporarily.
Oh, and the factory reset just wipes your data, but otherwise doesn't restore your system to factory state. That's why your dpi change remained.
YrrchSebor said:
I've had this phone just over 2 months but I'm not positive, is download mode the same as the bootloader on this device? If so, fastboot commands should work, and you can flash TWRP again, or do 'fastboot boot TWRP_filename' and it will boot TWRP temporarily.
Oh, and the factory reset just wipes your data, but otherwise doesn't restore your system to factory state. That's why your dpi change remained.
Click to expand...
Click to collapse
dude.. then what good is a factory reset?!? like seriously... and yeah, i tried that but i can't get adb to connect in download mode.. the device doesn't show up when I type "adb devices" like it did when i first rooted it. ... and i thought i followed the instructions exactly as it was laid out from this link.
http://forum.xda-developers.com/tmobile-lg-v10/general/guide-how-to-root-lg-v10-easy-t3274699
i think somewhere in there i must have missed something and ended up only booting into twrp temporarily.. which is certainly possible since i never boot to twrp during that initial process from the hardware keys or soft keys.. always through adb.. the phone was already plugged in.. typing the command was a couple keys away..
is there anyway to get TWRP on to the phone now? or am i screwed :'(
Well, it is a factory restore for the average user, because the average person isn't modifying their system. But no, I'm sure you're not screwed. If you're in the bootloader you can't use adb, you're already past that step, so you can skip to the fastboot part. What happens when you type fastboot devices? If the phone shows up then you can either fastboot flash or boot TWRP..
YrrchSebor said:
Well, it is a factory restore for the average user, because the average person isn't modifying their system. But no, I'm sure you're not screwed. If you're in the bootloader you can't use adb, you're already past that step, so you can skip to the fastboot part. What happens when you type fastboot devices? If the phone shows up then you can either fastboot flash or boot TWRP..
Click to expand...
Click to collapse
from what screen should i be attempting this? hold volume up with phone off and plug in to computer to enter download mode? should i try it at the factory reset screen (volume down plus power)? those are the only two screens i seem to have access to.. in download mode my pc/adb just doesn't recognize the phone.. it doesn't show up as a proper device like it did before this whole thing and in that factory reset mode i get nothing.. the download mode seems like its built for LG and runs from different drivers because in device manager it shows up with an error code that it couldn't start the device (this was not the case when i was using adb to unlock the bootloader and then using the bootloader to boot to TWRP..) what am i missing?
and hey, thank you so very much for taking time out of your day to help me. I really do appreciate it.
ngoblirsch said:
from what screen should i be attempting this? hold volume up with phone off and plug in to computer to enter download mode? should i try it at the factory reset screen (volume down plus power)? those are the only two screens i seem to have access to.. in download mode my pc/adb just doesn't recognize the phone.. it doesn't show up as a proper device like it did before this whole thing and in that factory reset mode i get nothing.. the download mode seems like its built for LG and runs from different drivers because in device manager it shows up with an error code that it couldn't start the device (this was not the case when i was using adb to unlock the bootloader and then using the bootloader to boot to TWRP..) what am i missing?
and hey, thank you so very much for taking time out of your day to help me. I really do appreciate it.
Click to expand...
Click to collapse
No problem buddy, and sorry for the confusion. You want to be on the bootloader screen, so here is what you can do: turn the phone off(or remove the battery if you have to, and put it back in), plug the usb cable into the computer only(not phone), hold volume down on phone, plug the usb cable into the phone. That should get you into the bootloader, and then you should be able to fastboot flash or fastboot boot TWRP.
Waiting for a resolution to this thread!
I'm pulling for you from the cheering section. (otherwise known as afraid to do it myself section!)
I'm pretty sure others have come through this exact situation unharmed (I've pretty much read every thread here.) so it's only a matter of time before you get this figured out.
Here's hoping it's sooner than later.
Sorry I can't offer more besides encouragement!
Sent from my pretty nifty brand new LG V10
ngoblirsch said:
from what screen should i be attempting this? hold volume up with phone off and plug in to computer to enter download mode? should i try it at the factory reset screen (volume down plus power)? those are the only two screens i seem to have access to.. in download mode my pc/adb just doesn't recognize the phone.. it doesn't show up as a proper device like it did before this whole thing and in that factory reset mode i get nothing.. the download mode seems like its built for LG and runs from different drivers because in device manager it shows up with an error code that it couldn't start the device (this was not the case when i was using adb to unlock the bootloader and then using the bootloader to boot to TWRP..) what am i missing?
and hey, thank you so very much for taking time out of your day to help me. I really do appreciate it.
Click to expand...
Click to collapse
Hold volume down and plug the cable in, already have completed in terminal.....
Sent from my LG-H901 using Tapatalk
YrrchSebor said:
No problem buddy, and sorry for the confusion. You want to be on the bootloader screen, so here is what you can do: turn the phone off(or remove the battery if you have to, and put it back in), plug the usb cable into the computer only(not phone), hold volume down on phone, plug the usb cable into the phone. That should get you into the bootloader, and then you should be able to fastboot flash or fastboot boot TWRP.
Click to expand...
Click to collapse
planetbeen said:
Waiting for a resolution to this thread!
I'm pulling for you from the cheering section. (otherwise known as afraid to do it myself section!)
I'm pretty sure others have come through this exact situation unharmed (I've pretty much read every thread here.) so it's only a matter of time before you get this figured out.
Here's hoping it's sooner than later.
Sorry I can't offer more besides encouragement!
Sent from my pretty nifty brand new LG V10
Click to expand...
Click to collapse
ZDeuce2 said:
Hold volume down and plug the cable in, already have completed in terminal.....
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
@ngoblirsch Along with the information provided in these suggestions and what you have said, you need to reinstall your LG/fastboot drivers on your PC while in fastboot mode
YrrchSebor said:
No problem buddy, and sorry for the confusion. You want to be on the bootloader screen, so here is what you can do: turn the phone off(or remove the battery if you have to, and put it back in), plug the usb cable into the computer only(not phone), hold volume down on phone, plug the usb cable into the phone. That should get you into the bootloader, and then you should be able to fastboot flash or fastboot boot TWRP.
Click to expand...
Click to collapse
OH DEAR GOD THANK YOU!!!!
I spent all damn day yesterday trying to figure out how to get to the bootloader on this phone.. everything i read online said to hold volume down PLUS power while plugging it in and it was NOT working lmao. dude, thank you so much. after i read that comment here it took me about 30 seconds to connect to adb and boot to TWRP. This thread can be listed as RESOLVED!
Thanks again!! can't wait to start tweaking this awesome phone!
planetbeen said:
Waiting for a resolution to this thread!
I'm pulling for you from the cheering section. (otherwise known as afraid to do it myself section!)
I'm pretty sure others have come through this exact situation unharmed (I've pretty much read every thread here.) so it's only a matter of time before you get this figured out.
Here's hoping it's sooner than later.
Sorry I can't offer more besides encouragement!
Sent from my pretty nifty brand new LG V10
Click to expand...
Click to collapse
Well I appreciate the encouragement, it sure seems to have helped! Issue has been resolved. ended up that i just didn't know the hardware key combination to get to the bootloader/fastboot mode without being already connected to adb. nothing that i could find online said to hold volume down while plugging it in to a computer. as soon as i was able to do so i connected to adb and it was a breeze from there; I am now back with an OS AND a customer recovery properly installed on the device!! I will be hanging around these forums for as long as i have this phone so i'm sure i'll bump into you guys! absolutely love the community here on XDA, you guys are freaking awesome!!
ngoblirsch said:
OH DEAR GOD THANK YOU!!!!
I spent all damn day yesterday trying to figure out how to get to the bootloader on this phone.. everything i read online said to hold volume down PLUS power while plugging it in and it was NOT working lmao. dude, thank you so much. after i read that comment here it took me about 30 seconds to connect to adb and boot to TWRP. This thread can be listed as RESOLVED!
Thanks again!! can't wait to start tweaking this awesome phone!
Click to expand...
Click to collapse
Glad you got it fixed, and welcome to the V10 device and forums!
hello,
I bought a CN version of gt, I unlocked the bootloader and changed the rom. Then I got again in twrp and pressed on reboot - then my phone bricked. It is not responding, and when I connect it to my pc, it connects and disconnects every 10 seconds while the cable still plugged in.
I don't know what to do, I spent 400$ on something that I can't use...
thanks.
Atalephinio said:
hello,
I bought a CN version of gt, I unlocked the bootloader and changed the rom. Then I got again in twrp and pressed on reboot - then my phone bricked. It is not responding, and when I connect it to my pc, it connects and disconnects every 10 seconds while the cable still plugged in.
I don't know what to do, I spent 400$ on something that I can't use...
thanks.
Click to expand...
Click to collapse
You can reflash the rom with realme flash tool。（https://androidmtk.com/realme-flash-tool) ----Sorry for making a mistake earlier
Have you tried it?
yiyinglaohu said:
You can reflash the rom with MIFLASH。（https://c.mi.com/oc/miuidownload/detail?guide=1 ）or (http://www.miui.com/shuaji-393.html)
Click to expand...
Click to collapse
but the problem is that it is connecting and disconnecting every few seconds
Atalephinio said:
but the problem is that it is connecting and disconnecting every few seconds
Click to expand...
Click to collapse
Try to get into fastboot mode first . Your situation seems to be that the ADB driver is not fully installed
you can find it on google
yiyinglaohu said:
Try to get into fastboot mode first . Your situation seems to be that the ADB driver is not fully installed
Click to expand...
Click to collapse
how??? it is not responding when I am pressing on the buttons. It is hard bricked.
no fastboot no recovery. nothing - just black screen.
Atalephinio said:
hello,
I bought a CN version of gt, I unlocked the bootloader and changed the rom. Then I got again in twrp and pressed on reboot - then my phone bricked. It is not responding, and when I connect it to my pc, it connects and disconnects every 10 seconds while the cable still plugged in.
I don't know what to do, I spent 400$ on something that I can't use...
thanks.
Click to expand...
Click to collapse
try vol "down" +" power" button, if it'll go to recovery stable you can use adb commands
or
vol "up"+"down"+"power" (3 buttons in total) and when you see chinese letters just relesease them. if its succesful, you'll see bootloader menu
grown_man said:
try vol "down" +" power" button, if it'll go to recovery stable you can use adb commands
or
vol "up"+"down"+"power" (3 buttons in total) and when you see chinese letters just relesease them. if its succesful, you'll see bootloader menu
Click to expand...
Click to collapse
I wish it was my situation... I tried it nothing happens.
Atalephinio said:
I wish it was my situation... I tried it nothing happens.
Click to expand...
Click to collapse
then i suggest official repair services
Atalephinio: "but the problem is that it is connecting and disconnecting every few seconds""no fastboot no recovery. nothing - just black screen"
You probably only have EDL mode active. I think only MSM Download Tool will help you. However, but this is a paid service.
This is my opinion, but maybe someone more experienced should have a say.
Try to press three buttons (vol up- vol down- power) during 40 seconds aprox....
May only use 9008 mode.
I solved it. The only solution is to pay to someone who got msmtool.
This problem happens when you flash another rom through twrp on gt, it erases the recovery of the phone and then when the phone is trying to go to recovery it becomes bricked .
If you want to avoid it use the commands of adb and fastboot through the computer (not through the phone itself).
I paid 15$ to @hoangzk9 he solved the problem.
Big thanks.
Atalephinio said:
I solved it. The only solution is to pay to someone who got msmtool.
This problem happens when you flash another rom through twrp on gt, it erases the recovery of the phone and then when the phone is trying to go to recovery it becomes bricked .
If you want to avoid it use the commands of adb and fastboot through the computer (not through the phone itself).
I paid 15$ to @hoangzk9 he solved the problem.
Big thanks.
Click to expand...
Click to collapse
As I know that realme gt dont public the flash tool so we need contact to the services to get they help.
Same with you, I have some problem when I tried to flash twrp to realme phone. No luck and my phone became hard brick. But you can send an email to eu services of realme, they can help without any paid.
Good to know.
Hey,
I installed TWRP as I have done many times before using the links from here and Odin, now all that happens is TeamWin flashes up every few seconds if I get into recovery, if I do adb reboot download, it just goes to the samsung splash screen and sits there forever. All I have access to is adb recovery, so I can open a adb shell, but from there I can do nothing.
I feel it is bricked, unless anyone knows what I can do from adb, any help would be greatly appreciated. It's not so much the issue twrp I need help with, I assume I did something wrong and that's caused the brick, but more the possible things I can do to fix.
Thanks in advance if anyone can help
Phrive said:
Hey,
I installed TWRP as I have done many times before using the links from here and Odin, now all that happens is TeamWin flashes up every few seconds if I get into recovery, if I do adb reboot download, it just goes to the samsung splash screen and sits there forever. All I have access to is adb recovery, so I can open a adb shell, but from there I can do nothing.
I feel it is bricked, unless anyone knows what I can do from adb, any help would be greatly appreciated. It's not so much the issue twrp I need help with, I assume I did something wrong and that's caused the brick, but more the possible things I can do to fix.
Thanks in advance if anyone can help
Click to expand...
Click to collapse
So did you backup the original boot partition? If not, maybe just use odin and flash your rom back. The term 'bricked' means the device is completely unresponsive, that's not your case. It's not 'bricked'.
AsItLies said:
So did you backup the original boot partition? If not, maybe just use odin and flash your rom back. The term 'bricked' means the device is completely unresponsive, that's not your case. It's not 'bricked'.
Click to expand...
Click to collapse
I have the original boot partition but I can't get into download so can't use Odin
Phrive said:
I have the original boot partition but I can't get into download so can't use Odin
Click to expand...
Click to collapse
Use the combo keys for Odin?
AsItLies said:
Use the combo keys for Odin?
Click to expand...
Click to collapse
Tried all the key combos for download and none of them work, I figured if abd reboot download didn't work the keys wouldn't either but still tried
i can help go to adb recovery remove usb cable hold power+volume up+down all three together once the device vibrates only remove power button keep holding volume up+down and plug in the usb cable(connected to computer) immediately otherwise it may go to Samsung screen then in odin mode just download firmware from samfw website and flash ap file done
if it shows Samsung logo its not a hard brick its a soft brick i had my tab hard bricked actually no response to charger screen doesn't turn on nothing i gave it to repair guy he just removed battery put it back and it started lol
zenitsu man said:
i can help go to adb recovery remove usb cable hold power+volume up+down all three together once the device vibrates only remove power button keep holding volume up+down and plug in the usb cable(connected to computer) immediately otherwise it may go to Samsung screen then in odin mode just download firmware from samfw website and flash ap file done
Click to expand...
Click to collapse
I 'think' I've sorted it, turning the device of in this state just don't seem to do anything or is too quick not sure.
If I get it into 'recovery' I can then do adb reboot and as soon as I hit enter hold both volume buttons and it makes it into download.
Currently reflashing the stock rom so thank you