Request for Root Method compatible with (ZTE Stratos Z819L) - Android Q&A, Help & Troubleshooting

**Hi, as a developer myself I here find this task very difficult and frustraiting, aswell as a "CHALLENGE" if you shall call it. I have a ZTE Stratos LTE on Straight Talk and ive tried countless methods to root it but have not succeded. I haven't found anything similar to this device that would lead me to believe I can root it. So I here I present you with this challenge/favor of finding/developing a root method for this device. Below is all the phone info (Needed info aswell as all other info included).
***!Methods Atempted!***
-KingoRoot APK & Windows Version
-FramaRoot with all 3 different build codes
-KingRoot Windows Program
-OneClickRoot APK & Windows Program
-PogoRoot APK
-Android SDK/ADB (Experience using ADB to mod and debug, No Luck)
-Other insignificant methods attempted that had not even a glimmer of success.
***!Preparations Already Done!***
-Freshly executed data wipe/factory reset
-Installed Android SDK/ADB on PC
-Gathered all Attempted Methods on pc for testing purposes
-Setup communication for myself to be available 24/7 provided I'm not sleeping
***!My Developer Settings!***
-Enable OEM Unlock [(On)/Off]
-Unknown Sources [(On)/Off]
-Verify Apps [On/(Off)]
-USB Debugging [(On)/Off]
***!General Info!***
-Manufacturer: ZTE
-Device: Sungod
-Model #: Z819L
-Simple Name: ZTE Stratos
***!Hardware Info!***
- GPU: Adreno (TM) 306; Qualcomm; OpenGL ES-CM 1.1; OpenGL ES [email protected] [email protected] ([email protected])
-RAM: 1024 MB (924 MB) Available
-Flash: Internal(8GB) External(32GB)
***!In-Depth CPU Info!***
-Processor: 0
-Model Name: ARMv7 Processor rev 0 (v7l)
-CPU Implementer: 7
-CPU Variant: 0x0
-CPU Part: 0xd03
-CPU Revision: 0
-BogoMIPS: 38.40
-# of Cores: 4 Cores
-Clock Speed: 200 MHz- 1209 MHz
***!Misc. Info!***
-MEID(H): 99000609016526
-MEID(D): 2566 9155 93000 91430
-Serial #: 52c0dada
-Build #: Z819L V 1.0.0B05
-BaseBand Version: Z819LB01
-Kernel Version: [email protected]
-MIN: 5053344008
-PRL Version: 15448
-Hardware Version: Z819LHWV1.0
-Frequency Band: CDMA/D0:800/1900 MHz LTE: 700 MHz, 1.7/2.1 GHz
-SIMD Instructions: NEON
-Fingerprint: ZTE/Z819L/Sungod:5.1/LMY490/2015.0701.104916: USER/Release-Keys
-SDK: 22
-FCC ID: 512Q Z819L
-IMEI: 990006090165266
-IMEI SV: 00
-ICC ID: 89148000002049423202
-API Level: 22
-Build ID: LMY490
-Instruction Sets: armaebi-V7a, armaebi
-Compressed Texture Formats: ATITC,ETCL,PALEFTED
-GLSL Version: OpenGL ES 3.0 [email protected] [email protected] ([email protected])
-Chipset: Qualcomm Technologies, Inc. MSM8916
-Extended Baseband Version: 2-00004-M8936FAAAANUZM-1.22048.1
-RIL Version: Qualcomm RIL 1.0
-CPU Features: swp half thumb fastmult vfp edsp neon vfpu3 tls vfpu4 idiva
---------------------------------------------------------------------------------------------------------------------------------------------------------------
**If you decide to accept this challenge I have given all device info necessary as well as unnecessary information. If you require info that I did not include, simply reply to thread or PM me and I will update the thread for everyone.
***!Self-Formed Liability Agreement!***
**I hereby state and completely by all means take any and all responsibility for any Damage or Unexpected Event that occurs during attempting Methods/Tests given to me to test on the device ZTE Stratos (Z819L) by (You & Everyone else). (You and everyone else besides myself) will not and cannot be held responsible for damages that occur to this device (Internally, Externally, Software wise, Hardware wise, visually, audio, video etc..).***
**P.S. I code aswell, produce standalone properly executable programs for all Operating Systems, repair hardware/troubleshoot hardware, repair software/troubleshoot software for (Android 2.2.3+, Windows Vista+, All Linux versions, Mac, and Apple OS) For anyone possibly needing assistance or just would like to pick my brain feel free to contact me on here, or my emails listed below.
**Thank you "XDA Team & Members" and I hope to hear good news about this device and as soon as possible!!
[Zardoshax© Co. Original Forum Thread/Post]

Oblivious
Apparently the ZTE Stratos LTE model: Z819L, can not be rooted.. It would be wonderful if someone could figure this phone out.
Thanks

I have heard from twitter that you could root Z918L Stratos in srsroot(.)com I haven't tried it this way yet but it might work.

Ginger77 said:
I have heard from twitter that you could root Z918L Stratos in srsroot(.)com I haven't tried it this way yet but it might work.
Click to expand...
Click to collapse
tried srsroot with my stratos but it failed

I'd place a small bounty, but the irony of donating towards developing a budget device would haunt me.
I've attempted king, kingo, and superoneclick as well with zero luck. I think this ZTE will join my vault of worthless tech.

Halsik123 said:
tried srsroot with my stratos but it failed
Click to expand...
Click to collapse
If anyone gets around to rooting this phone I also would donate

Related

[Q] Information MIDI Japan MD-785IP

Hello all.
I recently received as a gift a cheap tablet Android based and I am new in this Android world.
Till now I had a lot of problems with it that are software based (since I googled it all before post here). My main problem is that this tablet is a kind of general Chinese tablet that some manufacturer here in my country buy, put it brand on it and sell without any support or information.
The tablet I am talking about is named "MD-785IP" from "MIDI Japan" ( Since I can't post any external link I can tell you that if you google for "MIDI Japan MD-785IP" it is probably the first result)
A friend told me to install Electric sheep in order to discover something that could be usefull for a mod ROM search but till now I did not found any information about it over the web, apparently I am the only bastard that have one of those so I asking a help for you.
I need help to identify which tablet it really is and know if I have any chance with this information to find a better ROM, so far this is what I got in the Electric Sheep resume:
Build Infos
Android version: 2.2.1
Release Codename: REL
API LEVEL: 8
CPU ABI: mips
Manufacturer: ingenic
Bootloader: unknown
COU ABI2: unknown
Hardware: lynx
Radio, Board: unknown
Brand: lynx
Device: lynx
Display: lynx-eng 2.2.1 FRG83 eng.huangsen.20111015.104502 test keys
Fingerprint: lynx/lynx/lynx/:2.2.2/FRG83/eng.huangsen.20111015.104502:eng/test-keys
Host: HuangSen
ID: FRG83
....
CPU
system type: JZ4760B
processor: MIPS-compatible processor JZ4760B
cpu model: Ingenic Xburst V4.15 FPU V0.0
BoboMIPS: 598.01
wait instruction: yes
microsecond timers: no
tlb_entries: 32
extra interrupt vector: yes
hardware watchpoint: yes, count
ASEs implemented: mxu
...
CPU implementer: CHNBJJZ
CPU architecture: XBurst
Hardware: LYNX
Revision: 0005
So, my question is. Does anyone have any idea which tablet this one really is?
Please use the Q&A Forum for questions Thanks
Moving to Q&A

Generic China Tablet Moddification! (Help required)

Hello all!
I was surfing the internet for 100's of hours just to find some mod and rom for my china Mid tablet.
There is no brand name written on the TAB, So I used Android system info app to find some specification about this tablet!
Now, let's go to the real matter......
Before buying this tab I used more than 3-4 android devices and helped so many people to modify there phones. So, I know a little bit about android modding! But this is not gonna help me to create a whole new custom rom for my Generic MID Tablet. So I need your help,
First I am gonna give you some specification about my Tbalet....
Android Version: 4.0.4 (Icecream Sandwich)
Release Codename: REL
API LEVEL: 15
CPU ABI: armeabi-v7a
Bootloader: Unknown
Manufacturer: Unknown
CPU ABI2: armeabi
Hardware: Sun4i (That means Allwinner a10 I hope)
Radio: Unknown
Board: Crane
Brand: hn
Device: crane-hn
Display: crane_hn-eng 4.0.4 IMM76D 20121112 dev-keys
Host: ubuntu
ID: IMM76D
Model: MID-CH719H
Product: crane_hn
Total RAM: 1GB
Processor: ARMv7 Processor rev 2(v71)
Screen Resolution: 1024 * 552
Refresh rate: 59.396
Now, There is some other information I should provide.....
I rooted my device after taking a lot of surfing on the internet.
I also installed CWM Recovery
But i can't get into the recovery mode by restarting by pressing various keys.
The only way i get into the recovery mode by writing "echo -e 'boot-recovery\0' > /dev/block/nandf; sync" into the terminal emulator and reboot after that.
Now, What I want to do.....
1. I want to change all the "unknown" parts of the specification to show something...(Not mandatory)
2. Modify the kernel for adding few tweaks as overclocking, adding governors etc.
3. Find out is there any way to install 4.1.1 or 4.1.2 to this device
etc.......
Now I would be pleased if u guys give me some suggestion where to start...
I took a nandroid backup. but trying a lot of methods I couldn't make a copy of the kernel..
I found a boot.img file inside of the nandroid backup, is this the stock kernel of my device. it's 30mb file

[Q] Spreadtrum SCP6820a N7100 Mini_Note_II

HI
I Have Collected info for My Spreadtrum Mobile about model.
Info Collection
Settings > About Phone
Model number
MINI_NOTE_II
Android version
4.0.3
Baseband version
MAUI.11AMD.W11.37.SP.V16
04-02-2012
Kernel Version
2.6.35.7
[email protected]
Software Version
WXJ_K880C_08_V0_4
HARDWARE
1.1.0
Click to expand...
Click to collapse
http://ylt.com/
www.myltmobile.com
Spreadtrum Engineering Mode: *#*#83781#*#*
Boot Logo da Samsung: *#*#555#*#*
Boot Logo Padrão: *#*#556#*#*
Version Info
Plataforma Versão:
MOCOR_880XG_MODEM_W12.32_Debug
Project Version
sc8810_modem
Base Version
DM_BASE_12A_W12.32
HW Version
sc8810_modem,08-09-2012 16:47:10
Click to expand...
Click to collapse
Net Info
SCELL
724,03,520,16
NCELL
724,03,518,7
724,03,638,5
724,03,517,12
Debug Param
Band Select
GSM900 DSC1800 PCS1900 GSM850
Processor ARMv7 Rev 1 v7l
BOGOMIPS 1024.00
Features:
swp half thumb fastmult vfp edsp neon vfpv3
CPU
Implamenter: 0x41
Archtecture: 7
Variant: 0x0
part: 0xC05
revision: 1
Hardware:
Mediatek MT6515
Revision 0101
GPU doenst match
Click to expand...
Click to collapse
Device Hsdroid
Product Sprdroid_base
Display 240x320
Graphics MALI-300
OpenGL ES_CM 1.1
Sensor: AK8975-3-axis Magnectic field
Vendor: Asahi Kasei
Uname -a
Linux Version 2.6.35.8 [email protected] gcc 4.4.3 #6 Sun Apr 28 18:47:17 CST 2013
PAC https://docs.google.com/file/d/0BxZ0ZMeuhpwidlJWY3loQ1hhWUU/edit?usp=sharing
Extract packeted with ResearchDownload 2.9.7002
---
Im trying searching for ROM and specially howto create a second partition to use with /data, it's doesnt have /system/etc/init.d but /system/system/etc/init.goldfish.sh thread 2462984
I think this is a NOT CWM Clockwork set, maybe is another.
I Have almost connect with ResearchDownloa but fail to start flash because port com not working, but adb can shell it.
I Apreciate if somewhere have news for this mobile.
Reggards
do u have d backup of this original rom? we have desame phone but mine is dead when i flash wrong rom. please upload d original rom please!

Allwinner H6: how to root it (Orange PI One Plus Android 7.0)

Here is what we have:
Code:
cat /proc/cpuinfo
Processor : AArch64 Processor rev 4 (aarch64)
processor : 0
Features : fp asimd aes pmull sha1 sha2 crc32 wp half thumb fastmult vfp edsp neon vfpv3 tlsi vfpv4 idiva idivt
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
Hardware : sun50iw6
Serial : 0c000141091e5820090b
petrel-p1:/ # uname -a
uname -a
Linux localhost 3.10.65 #1 SMP PREEMPT Sun Apr 8 17:45:54 CST 2018 armv8l
petrel-p1:/ #
Old kernel...
I tried KingoRoot, TowelRoot, FramaRoot and KingRoot with no luck.
I had found this, but it does not work (the file path does not exist).
Any other idea?
Thanks.
Hi. Try this. It is for Orange pi lite2, but i think One Plus can be rooted same way.
Hi There,
I have recently bought a Orange Pi Lite 2 H6 1GB Quad Core Development Board, it comes with one USB 2.0 Port and one USB 3.0 Port.
I like to connect the HD Web Camera using the USB 2.0 Port or USB 3.0 Port on to that board, and including setting up the Live-Stream using a Wi-Fi on my PC, so do you have Video Tutorial or Instructions for it .
I don’t have Google drive so how can I download instructions for the Orange Pi Lite 2 H6 1GB Quad Core Development Board,
Because the Orange Pi Forums is a joke, I can’t even chat to people on the forums when I am logged in, and I cannot Post my message in the forums regarding about technical help I need.
So can you Please be kind enough to help me with this.
How to make WiFi work on Android with a Wifi Adapter using USB? (orange pi one plus)

[Question] How to root a ZTE Blade V0800

Hey all,
before we come to my question:
I searched already in the whole web, tried many ways, searched for many ways.
My Question:
Anyone know a way to Root a ZTE Blade V0800?
I tried already all popular one click root Methods like iroot, rootgenius, wondershare, kingoroot, kingroot, framaroot and many many more, all of these programs failed to root this Phone.
And yeah, i grant Permission to " unlock OEM " in the Device Settings.
I tried Odin and Magisk too, the Problem is CWM and TWRP don't Support this Device and i didn't found any other Recovery, which support this Device.
So the result until now: No Custom Recovery which support this Device, no one click root which is able to root this Device, can't install Magisk or anything like that, because no Recovery.
Anyone have an idea?
Sadly i can't post Pictures, because im new, so i will write here all things:
Device
Model: ZTE BLADE V0800 (P840F10_GLOBAL_CHANNEL)
Manufacturer: ZTE
Board: MSM8940
Hardware: qcom
System
Android Version: 7.0
API Level: 24
Security Patch Level: 2018-07-01
Bootloader: unknown
Build ID: GEN_GLB_BV0800_V1.12
Java VM: ART 2.1.0
OpenGL ES: 3.2
Kernel Architecture: armv8l
Kernel Version: 3.18.31-perf (20180802.042007)
Soc
Qualcomm Snapdragon 435 1,40 GHz
Cores: 8
Architecture: 8xARM Cortex-A53 @ 1,40 GHz
Revision: r0p4
Process: 28nm
GPU Vendor: Qualcomm
GPU Renderer: Adreno (TM) 505

Categories

Resources