Hi guys, after installing chainfire3d and reboot the device it win't start any more, it stop on teclast logo, rockchip flash tool don't recognize the device that in windows is seen as adb device..for some strange reason if i look at the device details it will be recognized as an htc?? I can start in recovery mode (the one with the little android ko with a red "!")
I really don't know what to do now.. someone with a brillant idea and some more experience than me can help in a flash with some other tool? or if exist an emergency flash from sd..
Thank you!!
Solved...
I'm sorry to have bothered you all.
It's strange.. but i changed the usb cable (that works perfect with my phone) and tablet was seen from the rockchip flasher..
Really sorry.
Thx.
Help
figus77 said:
Hi guys, after installing chainfire3d and reboot the device it win't start any more, it stop on teclast logo, rockchip flash tool don't recognize the device that in windows is seen as adb device..for some strange reason if i look at the device details it will be recognized as an htc?? I can start in recovery mode (the one with the little android ko with a red "!")
I really don't know what to do now.. someone with a brillant idea and some more experience than me can help in a flash with some other tool? or if exist an emergency flash from sd..
Thank you!!
Click to expand...
Click to collapse
Hello, how did you solve it? Please any help will do.
Hi, I was trying to use Flash tool and Don't know what happend but My Phone is completely DEAD right now even power button is also not working no screen is there (just blank phone).
I am having UMI X2 2GB rom, 32 gb internal memory, 1.5 GHZ (MT6589T) Model.
I tried to use SP Flash tool to recover my phone. Firstly I tried to format the phone, After that I tried to run the correct scatter file for MT6589 (from one of the ROM Posted under UMI-X2).
Drivers for the SP Flash tool is loaded correctly (into my Windows 8 Pc). I was previosly getting error as follow : SP FLASH TOOL ERROR: (8200)
[Platform Error] The load and target are inconsistent!
Now, after searching a lot I found that its something wrong with SP Flash tool version.
So I downloaded SP Flash Tool V3.1304.O.sn119 version. After that I am trying to "Download" the rom (with the correct scatter file for my ROM). but its only showing me RED Bar (with 100%) and after that it does nothing. Its neither showing me any error nor its continuing the process.
I am in serious problem here. Please help me out.
Thanks in advance!
- Umang
umang_nine said:
Now, after searching a lot I found that its something wrong with SP Flash tool version.
So I downloaded SP Flash Tool V3.1304.O.sn119 version. After that I am trying to "Download" the rom (with the correct scatter file for my ROM). but its only showing me RED Bar (with 100%) and after that it does nothing. Its neither showing me any error nor its continuing the process.
I am in serious problem here. Please help me out.
Click to expand...
Click to collapse
Try this version of :
SP Flash Tool
October Official Rom
USB Drivers (if needed)
Works for me.
Necro thread...
I have the same issue.
A couple of days ago the phone just started turning off / locking up when off, and having great difficulty tuning on... i.e. pulling out the battery for a minute or a few times.
Now the phone won't turn on at all. They only sign of life is the charging animation when you plug it in.
Prior to all this, there appeared a window in Chinese with some options. my GF (who's phone it is) just pressed something, no idea what. But she said something about 'drawing on the screen'??? sound like something locked up and the previous frame wasn't deleted from the frame buffer before redrawing the new one... I have no idea.
Anyway, I tried going into recovery to see if there was anything I could do there, unfortunately everything was in Chinese, so not much help. for some reason now, the recovery isn't even working.
Now I can connect to the phone via SPflash, but I get the above response: '[Platform Error] The load and target are inconsistent!'
Some other ROMs I tried give me this response:
'The load to be downloaded is for MT6589;
The target platform is MT6582_S00'
Which is quite suspicious.
Any ideas?
Thanks
hisense HS-U980 bricked....
hi,i have the smartphone hisense hs-u980 with mt6589 or mt6589t, i dont understand.... so, i briched with sp.flash tool and now is ompletly dead,,, can i have ur help-sipport please?
thank u very much
Hs-u980 complete dead/bricked
carretto76 said:
hi,i have the smartphone hisense hs-u980 with mt6589 or mt6589t, i dont understand.... so, i briched with sp.flash tool and now is ompletly dead,,, can i have ur help-sipport please?
thank u very much
Click to expand...
Click to collapse
i have ur same phone and i have ur same problem,my pkone is dead later flash any wrong miui rom from cwm recovery and now is dead,i dont have any idea where is original firmware for sp.flash tool or other how piranha box,please,anyone can please me??? THANK U for read!!!!
I have the same Problem. So frustrating men. If anyone finds a solucion please email me [email protected] ...
SP FLASH TOOL ERROR: (8200)
As i connect my phone it disconnects after 2 seconds..
Please give me a site to download scatter file for my micromax a 310
hello i tried to flash recovery via generated by mtkdroidtools , went fine to phone but after reboot stuck on logo... now bat low and wont turn on , wont load wont do anything.... rly , phone is dead now ? i got BACKUP via MTK of boot and recovery but how to flash if only fastboot working with accesss denied everytime when trying to flash recovery ?
what to do ? dev =
kazam 4 aka trooper x40
dude you need to post the details of your phone if you have them...I.e
make,model,ROM,ram,kernel...etc...for people to help you...I assume you have a mtk chip set which is why you were using mtkdroidtools also from my understanding this company is a new UK company so maybe trying to flash anything onto this model is a no no until someone here at xda has done it first
sent from my STAR/Mpai N8000
Unpack the rom to a folder then unpack SPFT start SPFT, Select and load scatter file from rom folder, press download,Then connect the powered off V785 phone to the usb cable.
Original Stock rom
http://www.mediafire.com/download/hoaken3645l0r3c/ot-V785-2AVDEG1_Original_SPFT_ROM_by_bRkA.7z
flash tool
http://www.mediafire.com/download/q5zrm94o4in1ga8/SP-Flash-Tool-v3.1344.0.212.7z
bricked my vodafone 785
hello...do i have a hard brick {vodafone smart mini 4:crying::crying:}?i flashed wrong boot image then i formatted with sp tools by mistake(i know,dump hey) so now i think my backup is corrupt,most files short...so can u pliz upload a sp flash tool backup plllizz i beg u...or preloader file....thanx
MTK Flash Tool dump of Alcatel OneTouch 4033 ...........Just build prop edit it back to vodafone 785 once flashed if it bugs you. <<<< What is the format of this file ??? OK ARC compressed managed it...
I've got bricked Vodafone 785 and I think only spflash will help me but I don't have any stock rom
Please help ?
EDIT:
Someone did format phone .... sp flash works but only Alcatel popc3 logo and recovery is avaible... after spflash I have broken partition table .... I don't know what to do :/
H_C_K said:
Someone did format phone .... sp flash works but only Alcatel popc3 logo and recovery is avaible... after spflash I have broken partition table .... I don't know what to do :/
Click to expand...
Click to collapse
Check it out:
gsmpro.com.pl/serwis/item/190-vodafone-785-smart-4-mini-naprawa-firmware-imei-polskie-menu-usuwanie-blokad-root
HEELP!!!
I was trying to put the nav bar (qemu.hw.mainkeys=0) in the build.prop file and rebooted the phone and iit is boot loop. What can I do? I haven´t CWM because I didnt find it, and I dont find the drivers of the phone.
Please help me it is a new phone ( 2 weeks) and my mum wont ever buy me a smartphone anymore .:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Is there a way to get fota updates for this device as a regular download through pc? If so, could someone please point me to the location? I need the latest update zip for this phone (i think from nov/dec 14) in german.
HI, I followed the instructions above, but I can't get the o.s. Just have the clockworkmod recovery now, so the vodafone 785 doesn't start. I also tried to put the backup folder into my extsd but I'm not able to restore the smartphone from the backup you uploaded (from cwm recovery), because it says "no file". Please can you help me?
Does this work? Anyone confirm?
CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fulgerul46 for posting.
Link
---------------------------------------------------------
Click to expand...
Click to collapse
Hello guys.
I really need this file to restore my phone can someone reupload it somewhere or pm me a link?
Thanks in advance.
I have a new vodafone smart 4 mini UK PAYG with 4.4.2
and another with 4.2.2.
Cant get it to update to same as other one ie 4.2.2 to 4.4.2
using OTA as both say they are uptodate.
Am newbie.
I guess copy firmware from one to the other somehow
and pass a copy to stock firmware archives.
Phone is DEAD. Don't Flash Flashtool File...
Can anyone explain what is to be done is phone is dead ? Totally confused !
I create fw 4 you
ex.ua/163049604103
Anyone? VF785 stock rom?
suslix78 said:
I create fw 4 you
ex.ua/163049604103
Click to expand...
Click to collapse
Where is the file please I need it.
CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fu
" CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fulgerul46 for posting."
Any chance we can get a re-up of this ROM, link is dead. Thanks!
Vodafone smart 4 mini doesn't start
Hi
I bought brand new vodafone smart 4 mini and first I did was root to unlock phone, next a very stupid idea came to my had to update software, after that my phone worked terreble, so another stupid idea came to my head to flash oryginal ROM, I downloaded rom, SPFlash tool , load scatter file and pressed download, everything looked good, it took about one minute and green circle ok at the end. I was verry happy, for couple seconds only, my brand new phone never started again. there was only short blink when I pressed power button , and then nothing. I've been trying to flash the phone many times after that with couple different ROM's but no succes. sometime phone doesn't even blink after flashing. Sometimes at the begining of flashing there is mesage "no partition table" or memory error. Please somebody help me, I'm loosing hope.
I think the only good news is that the "Media Tek PreLoader USB VCOM" still works, and looks like phone cooperates with the tool, maybe I should use different tool, or test phone first with some tool, or create partitin table ?
wigor75 said:
Hi
I bought brand new vodafone smart 4 mini and first I did was root to unlock phone, next a very stupid idea came to my had to update software, after that my phone worked terreble, so another stupid idea came to my head to flash oryginal ROM, I downloaded rom, SPFlash tool , load scatter file and pressed download, everything looked good, it took about one minute and green circle ok at the end. I was verry happy, for couple seconds only, my brand new phone never started again. there was only short blink when I pressed power button , and then nothing. I've been trying to flash the phone many times after that with couple different ROM's but no succes. sometime phone doesn't even blink after flashing. Sometimes at the begining of flashing there is mesage "no partition table" or memory error. Please somebody help me, I'm loosing hope.
I think the only good news is that the "Media Tek PreLoader USB VCOM" still works, and looks like phone cooperates with the tool, maybe I should use different tool, or test phone first with some tool, or create partitin table ?
Click to expand...
Click to collapse
somebody please help
there are away by sd card if anyone can plz pm me umor.raihan skype
Thank you very much, it unbrick the phone and add Arabic language
there is Arabic language in it .
this is not working for me what exactly is supposed to happen when you plug in phone?
Hi,
i have tryed to make an firmware upgrade to the tablet and after complete and restart the tablet turn on and remain in a black screen, dont do nothing.
The big problem is that is not load in to Safe mode so i can reverse to factory firmware and my PC dont see it anymore.
Any clue what to do?
I have found SP Flash Tool but the ROM and Firmaware i found dont have a scatter file to load, and not sure if will work either because the pc dont see the tablet.
Im pretty noob at this so dont be to harsh. Any help is appreciated.
Thanks