Related
Hi guys, after installing chainfire3d and reboot the device it win't start any more, it stop on teclast logo, rockchip flash tool don't recognize the device that in windows is seen as adb device..for some strange reason if i look at the device details it will be recognized as an htc?? I can start in recovery mode (the one with the little android ko with a red "!")
I really don't know what to do now.. someone with a brillant idea and some more experience than me can help in a flash with some other tool? or if exist an emergency flash from sd..
Thank you!!
Solved...
I'm sorry to have bothered you all.
It's strange.. but i changed the usb cable (that works perfect with my phone) and tablet was seen from the rockchip flasher..
Really sorry.
Thx.
Help
figus77 said:
Hi guys, after installing chainfire3d and reboot the device it win't start any more, it stop on teclast logo, rockchip flash tool don't recognize the device that in windows is seen as adb device..for some strange reason if i look at the device details it will be recognized as an htc?? I can start in recovery mode (the one with the little android ko with a red "!")
I really don't know what to do now.. someone with a brillant idea and some more experience than me can help in a flash with some other tool? or if exist an emergency flash from sd..
Thank you!!
Click to expand...
Click to collapse
Hello, how did you solve it? Please any help will do.
Hi
Ive been playing around with my mums rk30sdk tablet and managed to fully brick it. It WAS in blue mode (maskrom) but I managed to fix it and now its in green mode. Still nothing on the screen though and unable to flash it or connect via adb
I have the dumps of all partition images but cant adb to it or get into bootloader mode so im a bit stuck. I have an old rkflash tool that allows for flashing of separate partitions but it doesnt recognise the device
Using Windows I do get the 'bing' so I know its alive and rkbatchtool v1.7 gives me a green connection (no switch but can upload firmware)
Ive searched the net for firmware for this device with no luck The guy I got it off is a **** and doesnt even know where it comes from. Im sure I could flash it if i could make a single .img file from my dump .img files but ive had no luck so far
Im thinking my only option may be to build android from the source but thats a massive effort and fraught with problems so Im after an easier way.
It uses an ext3 file system. If I could just get the recovery back it would help but I really need to build a single flashable image from my dumps!
Im not the only one on here with issues with this device so anyone who can help me will be helping other people.
SPEC:
rk3066
1Gb RAM
8Gb ROM
10.1" display
model PT10.1
rk30sdk
Im using both Linux and Windows 7.
Anyone who can help me will get ALL the info on how I just got a FREE rk3188 10.1" tab (Unfortunatlly I think its a 't' chip but i havent opened it up yet so not sure)! It was free though so pretty cool! I found an idiot seller who can be blackmailed into refunding you and letting you keep the tablet as they list it as a totally different model
I know im bribing you guys here but my mum WILL kick my ass for bricking her tab so PLEASE help!
Unpack the rom to a folder then unpack SPFT start SPFT, Select and load scatter file from rom folder, press download,Then connect the powered off V785 phone to the usb cable.
Original Stock rom
http://www.mediafire.com/download/hoaken3645l0r3c/ot-V785-2AVDEG1_Original_SPFT_ROM_by_bRkA.7z
flash tool
http://www.mediafire.com/download/q5zrm94o4in1ga8/SP-Flash-Tool-v3.1344.0.212.7z
bricked my vodafone 785
hello...do i have a hard brick {vodafone smart mini 4:crying::crying:}?i flashed wrong boot image then i formatted with sp tools by mistake(i know,dump hey) so now i think my backup is corrupt,most files short...so can u pliz upload a sp flash tool backup plllizz i beg u...or preloader file....thanx
MTK Flash Tool dump of Alcatel OneTouch 4033 ...........Just build prop edit it back to vodafone 785 once flashed if it bugs you. <<<< What is the format of this file ??? OK ARC compressed managed it...
I've got bricked Vodafone 785 and I think only spflash will help me but I don't have any stock rom
Please help ?
EDIT:
Someone did format phone .... sp flash works but only Alcatel popc3 logo and recovery is avaible... after spflash I have broken partition table .... I don't know what to do :/
H_C_K said:
Someone did format phone .... sp flash works but only Alcatel popc3 logo and recovery is avaible... after spflash I have broken partition table .... I don't know what to do :/
Click to expand...
Click to collapse
Check it out:
gsmpro.com.pl/serwis/item/190-vodafone-785-smart-4-mini-naprawa-firmware-imei-polskie-menu-usuwanie-blokad-root
HEELP!!!
I was trying to put the nav bar (qemu.hw.mainkeys=0) in the build.prop file and rebooted the phone and iit is boot loop. What can I do? I haven´t CWM because I didnt find it, and I dont find the drivers of the phone.
Please help me it is a new phone ( 2 weeks) and my mum wont ever buy me a smartphone anymore .:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Is there a way to get fota updates for this device as a regular download through pc? If so, could someone please point me to the location? I need the latest update zip for this phone (i think from nov/dec 14) in german.
HI, I followed the instructions above, but I can't get the o.s. Just have the clockworkmod recovery now, so the vodafone 785 doesn't start. I also tried to put the backup folder into my extsd but I'm not able to restore the smartphone from the backup you uploaded (from cwm recovery), because it says "no file". Please can you help me?
Does this work? Anyone confirm?
CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fulgerul46 for posting.
Link
---------------------------------------------------------
Click to expand...
Click to collapse
Hello guys.
I really need this file to restore my phone can someone reupload it somewhere or pm me a link?
Thanks in advance.
I have a new vodafone smart 4 mini UK PAYG with 4.4.2
and another with 4.2.2.
Cant get it to update to same as other one ie 4.2.2 to 4.4.2
using OTA as both say they are uptodate.
Am newbie.
I guess copy firmware from one to the other somehow
and pass a copy to stock firmware archives.
Phone is DEAD. Don't Flash Flashtool File...
Can anyone explain what is to be done is phone is dead ? Totally confused !
I create fw 4 you
ex.ua/163049604103
Anyone? VF785 stock rom?
suslix78 said:
I create fw 4 you
ex.ua/163049604103
Click to expand...
Click to collapse
Where is the file please I need it.
CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fu
" CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fulgerul46 for posting."
Any chance we can get a re-up of this ROM, link is dead. Thanks!
Vodafone smart 4 mini doesn't start
Hi
I bought brand new vodafone smart 4 mini and first I did was root to unlock phone, next a very stupid idea came to my had to update software, after that my phone worked terreble, so another stupid idea came to my head to flash oryginal ROM, I downloaded rom, SPFlash tool , load scatter file and pressed download, everything looked good, it took about one minute and green circle ok at the end. I was verry happy, for couple seconds only, my brand new phone never started again. there was only short blink when I pressed power button , and then nothing. I've been trying to flash the phone many times after that with couple different ROM's but no succes. sometime phone doesn't even blink after flashing. Sometimes at the begining of flashing there is mesage "no partition table" or memory error. Please somebody help me, I'm loosing hope.
I think the only good news is that the "Media Tek PreLoader USB VCOM" still works, and looks like phone cooperates with the tool, maybe I should use different tool, or test phone first with some tool, or create partitin table ?
wigor75 said:
Hi
I bought brand new vodafone smart 4 mini and first I did was root to unlock phone, next a very stupid idea came to my had to update software, after that my phone worked terreble, so another stupid idea came to my head to flash oryginal ROM, I downloaded rom, SPFlash tool , load scatter file and pressed download, everything looked good, it took about one minute and green circle ok at the end. I was verry happy, for couple seconds only, my brand new phone never started again. there was only short blink when I pressed power button , and then nothing. I've been trying to flash the phone many times after that with couple different ROM's but no succes. sometime phone doesn't even blink after flashing. Sometimes at the begining of flashing there is mesage "no partition table" or memory error. Please somebody help me, I'm loosing hope.
I think the only good news is that the "Media Tek PreLoader USB VCOM" still works, and looks like phone cooperates with the tool, maybe I should use different tool, or test phone first with some tool, or create partitin table ?
Click to expand...
Click to collapse
somebody please help
there are away by sd card if anyone can plz pm me umor.raihan skype
Thank you very much, it unbrick the phone and add Arabic language
there is Arabic language in it .
this is not working for me what exactly is supposed to happen when you plug in phone?
Hello, I dont know if this is the right place to get help. I'm new here, i really need help. Because my Lenovo A369i can't turn on, maybe bricked or something. I will tell what did i exactly do until my phone get like this.
I have ROOTED my Lenovo A369i , no backups and no nothing.
Well the thing is, i found an app named Uninstaller Pro last friday , i downloaded it since i want to remove unnecessary things in my phone. So i tried removing an app, removed success but something popped up and the pop up said things that i dont even understand, something like chinese writing. Then i press Home, i tried to install the App back but i can't then i reboot my phone. ): It stays on the Lenovo LOGO. I do can't anything, i already tried reboot but still the same. I already test to factory reset in my phone Recovery, still the same. So i googled about how to repair my phone, i see this website ~> LenovoA369i Blogspot *GOOGLE IT* / I cant put the website. I followed this website How To Update, I don't know anything i just followed its guide. Then i tried , after doing it nothing happens. Then i can't even reboot, go to Recovery mode.
Can anyone help me with this PROBLEM !! Please help me find a solution.
My Phone
Lenovo A369i 4.2.2 OS JB
I forgot the ROW thing, maybe its Lenovo A369i ROW S201 if im not mistaken
Download the firmware first from lenovo. Blogspot, search for the a369i s108, Then download the latest sp flash tool and follow the methods by typing : how to flash lenovo a369i... U can find it here
Sent from my Lenovo A369i using XDA Free mobile app
---------- Post added at 04:12 AM ---------- Previous post was at 03:56 AM ----------
http://forum.xda-developers.com/showthread.php?p=55744573
Sent from my Lenovo A369i using XDA Free mobile app
AnonymousV3 said:
Hello, I dont know if this is the right place to get help. I'm new here, i really need help. Because my Lenovo A369i can't turn on, maybe bricked or something. I will tell what did i exactly do until my phone get like this.
I have ROOTED my Lenovo A369i , no backups and no nothing.
Well the thing is, i found an app named Uninstaller Pro last friday , i downloaded it since i want to remove unnecessary things in my phone. So i tried removing an app, removed success but something popped up and the pop up said things that i dont even understand, something like chinese writing. Then i press Home, i tried to install the App back but i can't then i reboot my phone. ): It stays on the Lenovo LOGO. I do can't anything, i already tried reboot but still the same. I already test to factory reset in my phone Recovery, still the same. So i googled about how to repair my phone, i see this website ~> LenovoA369i Blogspot *GOOGLE IT* / I cant put the website. I followed this website How To Update, I don't know anything i just followed its guide. Then i tried , after doing it nothing happens. Then i can't even reboot, go to Recovery mode.
Can anyone help me with this PROBLEM !! Please help me find a solution.
My Phone
Lenovo A369i 4.2.2 OS JB
I forgot the ROW thing, maybe its Lenovo A369i ROW S201 if im not mistaken
Click to expand...
Click to collapse
Flash stock rom using SP Flash Tool
download the firmware then flash it with sp flash tools.
Im Also Having Same Problem Maybe Even So Terible [sorry for my english]
Before This Happen,I like to modding my lenovo a369i with xposed framework modules and like to changing fonts for my phone,everything works fine until i have change my fonts to some of unsupported fonts that i get it from the internet,then after i reboot its come to bootloop,without thinking anything I go to recovery mode and then i make HARD RESET,and then i think it will okay,until then its still nothing happens,so i search trough the internet looking for the best way and found someway like flashing the stock rom for lenovo a369i and then i download this file: Lenovo A369i_ROW_S110_140108 and start flashing likethey doing,everything works fine,they load the pink-purple bars and go to green and yellow and then its pop out some green circle,i think its done but after that when im going to turn it on,NOTHING HAPPENS OR LIGHTS UP.....:crying: now i dont know what im gonna do,try to flash its back but now its says,BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
i know it become like that because of the driver,its no longer Mediatek VCOM PORT,its become MTK USB PORT (COM5), i also read some threads they post that is the way to fix it by pressing the vol down button or the volume down + power button or vice versa and yes its working and show the MediaTek DA VCOM PORT but sometims its also show Unknown Device,I try to update it with the given lenovo driver but its say that it have been up to date....
PLEASE SOMEONE HELP ME RECOVER THIS :crying:
MAY GOD BLESS THEM THAT HELP ME
THE POOR MAN
MH1368
Brom error!!
mh1368 said:
Before This Happen,I like to modding my lenovo a369i with xposed framework modules and like to changing fonts for my phone,everything works fine until i have change my fonts to some of unsupported fonts that i get it from the internet,then after i reboot its come to bootloop,without thinking anything I go to recovery mode and then i make HARD RESET,and then i think it will okay,until then its still nothing happens,so i search trough the internet looking for the best way and found someway like flashing the stock rom for lenovo a369i and then i download this file: Lenovo A369i_ROW_S110_140108 and start flashing likethey doing,everything works fine,they load the pink-purple bars and go to green and yellow and then its pop out some green circle,i think its done but after that when im going to turn it on,NOTHING HAPPENS OR LIGHTS UP.....:crying: now i dont know what im gonna do,try to flash its back but now its says,BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
i know it become like that because of the driver,its no longer Mediatek VCOM PORT,its become MTK USB PORT (COM5), i also read some threads they post that is the way to fix it by pressing the vol down button or the volume down + power button or vice versa and yes its working and show the MediaTek DA VCOM PORT but sometims its also show Unknown Device,I try to update it with the given lenovo driver but its say that it have been up to date....
PLEASE SOMEONE HELP ME RECOVER THIS :crying:
MAY GOD BLESS THEM THAT HELP ME
THE POOR MAN
MH1368
Click to expand...
Click to collapse
Hello mh1368,
Sorry to hear about your issue.The S_FT_ENABLE_DRAM_FAIL Occurs when you have used an unsupported scatter loading file...at this point when you click download in sp flash tool, the bootloader is cleared but due to the wrong scatterer loading file the new firmware does not get flashed leaving behind a bricked smartphone:crying:.But no need to worry its just a soft brick:laugh:.We can get your phone back to life through certain steps.Can you tell me your about your build no??
Just flash this
https://drive.google.com/file/d/0B_KxHkaDeA14QWM0QkNUZzRuMHM/edit?usp=sharing
and it will work
I also have this kind of problem in my lenovo a369i but case is that after i flash row_s108 thru SPFT , I cannot turn on my phone anymore and i tried to flash again but SPFT doesn't recognize my phone anymore.. Is there any way to fix this problem??
Any information is a big help.. Thanks In Advance
Hi Guys
i have bricked my Vodafone VF685/ Alcatel Pop D1/ Huawei U1860 or whatever make this is (quite confusing) with SP Flash tool MT6572.
I tried to flash CWM recovery (successfully rooted with KingRoot) with the Scatter file compatible with the SP Tool version. All went well, bur my phone didnt want to go past the start up logo. So i tried flashing it again, and now it doesnt want to switch on nor charge, cant boot into recovery. Just a dead phone with a black screen. My pc doesnt pick up my phone via usb and i get error code 4004, i did some searching on how to fix the error code but im still stuck in a rut...
Any advice on how to fix this and please any advice on how to tell which recovery and scatter and firmware is for this phone?
Model: V685-1
SVN: 120HJG1
MANF: TCT MOBILE LTD
CU REF: V685-2AVDZA1
Thank you in advance, i really appreciate your help and advice.
Johan
Well, this is quite dissappointing... Not a yes or a no... Nothing....