!!! PLEASE READ THIS ENTIRE POST BEFORE PROCEEDING !!!
this tutorial applies to all infinx note 2 X600 and it is not require a specified firmware do it when your phone totally dead (no boot, not detected by pc)
Caution :
Do it at your own risk, i'm not responsible for any bricks you may obtain. Please follow the thread rules and steps and everything will be gravy. Remember, select the right firmware for your phone
You must have the following to revive your phone:
- A hardware knowledge
- The right firmware for your phone " notice for 532 or 533 board "
X 600 H 532 A1 L
X 600 H 533 A1 L
X 600 H 533 B1 L
if you don't know your board number it will be written on the board as you will see in the pictures
- infinix drivers and xflash tools
- and of course a pc
how to do it:
- install the drivers
- identify your board number for the right firmware
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- after confirming that you have the right firmware
start xflash tool and load the scatter file and press start
- only connect the socket in the picture after that connect the usb cable " the pc must not detect the phone at this point "
- make a jumper between the ground and the force boot pinout
" just make the jumper for one touch don't keep them connected"
once you make that you must here that your pc recognize your phone and the xflash tool will make the rest
Contributors:
mhmyasser
thanks to "satin" for the pictures​
thnx for this
Sent from my Nexus 7 using Tapatalk 2
tanx for this life saver some day
you are a life saver bro........thanks so much
Every thing is proper but facing fallowing error .
correct me where i am wrong..
B.R
please, how can i locate the force boot point on the board so that i can make the jumper between the ground and the force boot point
infinix x600 error 3182
plz i did all that and got error 3182 storage not match plz help me
Thanks for your tutorial flashing infinix note 2
cant locate force boot
Dyeck said:
Thanks for your tutorial flashing infinix note 2
Click to expand...
Click to collapse
where can i find the force boot ? my board is on the 3rd picture, please can you label it on the 3rd pic where is the force boot? Thanks.
Related
Hai all.. help me please.. :crying:
I need to change CWMRecovery for this phone.
i am trying backup my phone with SPFT full backup with Length 13AA0000 (this area Cache).
after backup my phone is dead do not power on also brick, i am confusion, i don't know my phone is Nand Flash:crying::crying:
now i have ROM_0 and scatter file only. how to make file flash for flash tools..? my phone do not conected to MTKDroidTools.
my phone information:
MT6573 CPU @ 650MHZ 5.0 inch Samsung Galaxy Note I9220/N7000 Fake
512MB ROM(NAND flash) + 512MB RAM
Dimensions 145*80*9.9 mm
This phone from Malaysia
NAND Flash:
Device ID = "[Micron] MT29C4G96MAZAPCJA_5IT" (109)
Size = 0x20000000 (512MB/4096Mb)
I don't have other information because i am forget to try connected to MTKDroidTools now my phone is dead.
Give me solution for this phone... help me please...
Sorry my english so bad...
This image:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have tried several rom for these devices, there is no suitable and still bricked,
I currently don't have much information about this device, that I know my device is android v2.3.6
please help me which one is suitable rom for these devices
thanks
Same is here
SyGMa.Com said:
I have tried several rom for these devices, there is no suitable and still bricked,
I currently don't have much information about this device, that I know my device is android v2.3.6
please help me which one is suitable rom for these devices
thanks
Click to expand...
Click to collapse
I have the same problem , and i posted it but no one replies
I searched the whole internet for a fix or a tweak that could help us but unfortunately no hope.
I hope you find some solution
spft
search device firmware in google i cant post link but if you search you will find firmware and spft
then do a full flash!
I don't know , what is my phone rom ?
may be it is fake Samsung s4 but after rest factory logo in boot show "mediatek"
ram : 512
please help!!!!!
info typed on phone back:
MODEL: GT-I9500
FCC ID: A3LGTI9500
SSN:-I9500GSMH
RATED:3.8V-----1300MA
MADE IN KOREA BY SAMSUNG
ver : i9500xxuamdk
ver. no : jdq39.i9500xxuamdk
it is some snapshot :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
elhakim84 said:
I don't know , what is my phone rom ?
may be it is fake Samsung s4 but after rest factory logo in boot show "mediatek"
please help!!!!!
it is some snapshot
View attachment 2707681
View attachment 2707682
Click to expand...
Click to collapse
These things are hard to be 100% on since there are like 1000s of knock offs like this and many are very similar with only a few differences. But, this one:
http://www.needrom.com/mobile/model-i9500w-mtk6572/
looks like it should be the right one since it has the same baseband version. Sorry it's in Italian. Google Translate should help. But should be the same as loading any other MT6572 based rom.
I'd also suggest to remove the IMEI from the screenshot as it's not hard for someone with a lot of knowledge and not so many scruples to take your IMEI and use it on another phone which might make yours not work properly or at all. Especially on MTK devices as there are a lot of IMEI repair and changing tools available since security on that part is not as highly valued as say, Qualcomm.
thanks es0tericcha0s for advise....
I try that rom but not work
Sorry. :/ What is not working? Did it fail to install the rom? Does it not boot up at all? Does it freeze on the boot animation...? Details are very important in troubleshooting.
es0tericcha0s said:
Sorry. :/ What is not working? Did it fail to install the rom? Does it not boot up at all? Does it freeze on the boot animation...? Details are very important in troubleshooting.
Click to expand...
Click to collapse
some time it show booting logo and reboot again and again , and when tried to use recover by " +vol + power b. " show me that menu :
[recovery mode]
[fastboot mode]
[normal boot]
but recovery mode ( time before was showed cwm 3e) but now not work,
fastboot freezed not show anything
normal (time before was worked and load OS ) but now reboot device
I bricked my Blu life one x and I want to repair it can someone help me out ow to do it and where I can't find the Blu life one x rom?
Download this:
https://www.androidfilehost.com/?fid=24391638059058964
From user @Bad_MOFO_33
Then download the SPFlash tool from here:
http://spflashtool.com/
Then be sure to have usb drivers installed so the COM identifies your phone.
Open the ROM you downladed and extract the carpet into desktop or somewhere you can easily find it.
Open SPFlashtool and go to the DOWNLOAD window and select Scatter-loading and select the scatter file from the folder where the ROM is like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then with the phone turned off (surely is off since its bricked) click the DOWNLOAD button on the spflashtool
And then AFTER you clicked DOWNLOAD on SPFLASHTOOL connect the phone while holding the VOLUME UP and is should identify it and begin the process.
DONT disconect until its done and a BIG GREEN CHECK mark appears, then just unplug and power it on.
ANd thats it
-------------------------------------------
Sorry i dont know why the image is not loading but hopefully the instructions will guide you
Thanks I'm going to try it tomorrow.
Thanks bro... It has worked.... But now I have a different problem... The sim doesn't get recognized.
azazsxsxdcdcfvfv said:
Thanks bro... It has worked.... But now I have a different problem... The sim doesn't get recognized.
Click to expand...
Click to collapse
Might need to repair your IMEI
Follow this guide:
http://sheershbansl.blogspot.mx/2014/08/how-to-fix-invalid-imei-3-methods.html
NOTES:
1.- you IMEI numbers are on the battery sticker theres 2 of em one for sim 1 and the other for sim2
2.-when entering the imei where it say to type AT+ etc etc on our BLU you need to type AT (SPACE) + and the rest, so it looks like AT + and then all the rest (EGMR=1,7,"1234567890")
3.- remember to SET Command and then reset so the IMEI settles in.
Hope thats the problem solver
Thanks for all guys that helped me... The sim problem was my fault cause I messed around with the bands. Like north America and world bands...
Rohm was installed wrong phone
Now, the phone is a new operating system, but I did touch and the camera and the flash does not work
MT680 S7 G930FD
model rord : Z6U030HA
model:gxq6580_weg_l
More than 20 system experience
All the same problems
Touch inverse
Have you tried the firmware linked in this thread?
http://forum.gsmdevelopers.com/f51/samsung-s7-sm-g930fd-clone-mt-6580-firmware-here-12699/
Once it is flashed you may need to bring back the Samsung logo by rooting the phone and editing /proc/env_logo_id with a hex editor by adding 01 to the file. Save it, then restart the phone immediately for the changes to take effect.
His experience has been an ongoing problem
I don't understand you mate. If the above mentioned ROM doesn't work, you might want to try this ROM I dumped off my phone:
http://www.4shared.com/rar/6mMhYIk5ce/Galaxy_S7_mt6580_Z6U030HA_V105.html
Is there a password
I think the problem in Lisse rom
Deleted because the calibration file
When you attempt to calibrate the Miracle error appears:
* Waiting for USB Port ...
** Set? PreLoader USB VCOM Port (COM5)?
** Please Hold "ON" to connect with the phone ...
** Waiting for USB Port ...
** Set
** Connecting AT Mode
** Test Mode, Reading Information From the Phone ...
>> Completed, but data not Found
No, the ROM isn't password-protected.
Try pressing the reset pin on top of the phone and see what happens when you connect it.
I did not understand the meaning
Try pressing the reset pin on top of the phone and see what happens when you connect it.
There is a small hole at the top of the phone which you can press with a needle. Press it, and see if it works.
blakegriplingph said:
There is a small hole at the top of the phone which you can press with a needle. Press it, and see if it works.
Click to expand...
Click to collapse
Did not benefit a pin button is pressed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I think I need me lcd calibration files
Touch from the bottom and right side parked
I have the same problem. Looking for a solution as well.
Hello
I think I have hard-brick my smartphone. Issues are after some flash, it won't boot anymore. No MI logo, no notification light on, ... .
Configuration :
Redmi Note 4 [Snapdragon] 4GB 64GB Global Version
Windows 10 Pro x64
MIUI ROM Flashing Tool
MIUI ROM Redmi Note 4 Qualcomm Latest Global Developer Version Fastboot File Download
I am not responsible from any damages.
Open SIM card tray with ejector tool :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Open from bottom, left, right, top with tools :
Unconnect battery :
Wait 10 sec.
Plug USB side cable into laptop.
Test point method with tool catchs circles and plug micro-usb into smartphone :
If you read Qualcomm HS-USB Diagnostics 900E, it is not ok, retry previous step.
If you read Qualcomm HS-USB QDLoader 9008, it is ok, go next step :
Launch MiFlash, select mido_global_images folder, click refresh, device appears into list, select clean all on bottom (flash_all.bat), click flash, wait until result success.
Remove micro-USB.
Mount battery cache, top, bottom, left, right side.
Insert sim tray.
Power smartphone and configure it.
Enjoy
billcat74
Sorry for refresh but in MiFlash when I press "refresh" it can't find my phone I have Qualcomm HS-USB QDLoader 9008 but I have error like
It even dont show thinking on display
When i flash it stopped with error can't receive hello packet
Please help asap
flashing problem
works as described until the middle of step 7 when I hit 'flash' it tries to "ping target via firehose" for 20s and then returns "write timeote,maybe device was disconnected" and "error"
Tried repeating with different cables and different ports with the same results.
Any tips on troubleshooting / moving forward beyond this point would be very appreciated.
Thank you for this guide and your efforts
Worked for me!
Thanks a lot man. I was able to revive my mido.