Hi guys.
I recently bought a BLU Studio G Plus SoC MT6580M Lollipop 5.1.*
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I succesfully rooted this device using King Root and then I used Supersu-me to replace King Root with Supersu.
This is when my device got bricked.
The Supersu-me app showed a message telling me it was succesfull.
However, a second after this message, the phone rebooted and now it is stuck on boot screen.
I dont have a custom recovery so I have to find a workaround.*
Since this model was released on November 2015, there is still no stock Rom on the internet.*
I have a friend that has this same phone and he borrowed me his device to extract the Rom, but I had no luck.*
This is what I've tried:*
1. On my phone I did a Wipe data/Factory Reset and Wipe Cache using the stock recovery but it didnt help, still on bootloop.
2. I did a data backup on my friend's phone using the stock recovery and it was placed on his SD card , then I put his SD on my phone and did a data restore. It didn't help, still on bootloop.
3.Rooted my friend's phone using King Root and installed Busybox. It was successfull. Decided to stay with the King Root app to prevent bricking my friend's phone.
4. I tried MTK Droid Tools to extract the Rom from my friends phone. It says it was complete with errors
(ERROR :No Split Boot Image" - ERROR: Zero file, no space left on device! - ERROR : --- TotalBytesPerChunk Not Found. Set default )
There is plenty of space on the device and SD Card so I dont know what this means. Later I found out that this SoC is not supported yet by MTK Droid Tools
5. Tried editing MTKdroidTools.ini to make this SoC compatible. I managed to create a scatter file to use with SP Flash tools but I had no luck preparing
the previous Rom extracted from my friend's phone to use with SP Flash Tools since it was incomplete/corrupted (not sure).
6. Tried to flash CWM on my friend's phone using MTK Droid Tools but it didn't work (ERROR :No Split Boot Image)
7. Tried installing Philz Recovery and TWRP for MTK on my friend's phone using Easy Magic Istallers with both. Neither worked. It says It was successfull but
when I rebooted to recovery it was the same stock recovery.
8. Tried using MTK Droid Tools on my phone but it hangs in the process of recognizing my phone.
9. I managed to make a Nandroid Backup of my friend's phone using the app called Online Nandroid Backup. It was placed on the SD and then I saved it to my pc.
10. I managed to extract boot.img and recovery.img from my friend's phone using the app called Flashify and saved it to my pc.
So all I have now is My Bricked Phone; a Nandroid Backup taken from my friend's phone; the files boot.img and recovery.img taken from my friend's phone.
I realy need to fix my phone since I bought it to replace my old Blackberry 9360 phone wich no longers meet my work requeriments and right now I cant afford buying another one.
If you need further information please ask. English is not my original language so sorry for gramatical errors.
Any idea would be strongly aprecciated. Thanks in advance.
Any progress?
Any update on your progress? I bricked my Trini Bmobile Blu Studio G Plus in exactly the same way.... kingsroot followed by super sume.
gringobenuk said:
Any update on your progress? I bricked my Trini Bmobile Blu Studio G Plus in exactly the same way.... kingsroot followed by super sume.
Click to expand...
Click to collapse
Hi, gringobenuk.
Yeah my phone is from T&T Bmobile too..
I'm Still waiting.
I found a new tool called SpaceMTKtool wich claims to be similar to MTK Droid Tools and have more compatibility with new MTK SoCs.
http://chinagadgetsreviews.blogspot.com/2015/07/download-spacemtktool-v110.html
I just have to wait that my friend can borrow me his Blu Studio G Plus to make the rom backup using this tool and then flash it in my phone.
If you have access to another Blu Studio G Plus, please try this tool..
I also found this webpage
http://www.clangsm.com/forum/index.php?showtopic=375734
they have all the firmwares for Blu devices including Blu Studio G plus. The problem is that I have to pay 30 USD for a VIP Account in order to download the firmware. I don't even have a Credit Card so there's no chance for me.
If I make any progress I'll let you know. Also If you found something else please let me know.
BTW I'm from Venezuela. Where are you from?
Blu blues
I'm in Trini but from UK.
> I found a new tool called SpaceMTKtool... similar to MTK Droid Tools and have more compatibility with new MTK SoCs.
That sounds like a good find.
> [clangsm.com] have all the firmwares for Blu devices including Blu Studio G plus.
> The problem is that I have to pay 30 USD for a VIP
I found them also. The phone cost 60 USD so not worth spending more on the chance they actually have the right one.
> If I make any progress I'll let you know. Also If you found something else please let me know.
Will do. I have learned that the D790 roms are not the correct roms and that there are two versions of the STUDIO G PLUS ... the S500Q and the S510Q (I do not know the difference)
PS. Did you manage to get yours unlocked and if so, how?
You have been doing bad!
You are doing everything wrong. I can see you aren't familiar with how the phone works. Don't worry, just follow instructions and you will probably have your phone back.
This is the thread you need, everything you need:
http://forum.xda-developers.com/showthread.php?t=2160490
"NEVER EVER FLASH THE PRELOADER" you will be fine otherwise
You will be using this tool: SP_Flash_Tool_exe_Windows_v5.1452.00.000
in addition to the other one you know (MTK tools)
Flashing CWM takes like 5 minutes when you know what you are doing, but like 1 hour reading that post I gave you the first time. (That guru posted the same in russian, in case you can understand that one better)
The resume would be
1) Make scatter file with MTK tools AND a working phone
2) Use scatter in SP flash tools to extract Boot image (recovery) from working phone
3) Use MTK tools to generate a "compatible" CWM
4) Flash that CWM using SP flash tools to bricked phone
Now you have cwm. If it works on the bricked phone, you must do the same on the good phone
5) Flash CWM the way you just learned on the good phone
6) Use MTK tools to make a backup of the good phone
7) Restore the good phone's backup made by MTK tools using SP flashtolls on the other phone
SP flash tools works with the phone "turned on" and, while connected, turning it off when you are ready to start. Thrifty, eh?
You can't restore backups made by sp flash tools on these phones.
once you have CWM, you can flash supersu with another method, because MTK is not rooting my phone correctly.
if you are using MTK tools with these phones differently, you are not doing it right.
Look at the pictures at the end of this post, our phones have three screens
1) stock recovery (volume up)
2) Factory tests (volume down)
3) Fastboot (I can't enter this with keys, only with commands, if you discover how, please post)
==================================
I wonder If the lollipop could be ported to my phone. When you unbrick one, please post the SP Flash tools and the scatter file, will you? Thanks.
If you check this page, it is the BLU Product page for both our phones
http://bluproducts.com/index.php/studio-g-plus
http://bluproducts.com/index.php/studio-g
and
Check Mediatek's site (the one making the boards)
http://www.mediatek.com/en/products/mobile-communications/smartphone1/mt6582/
Our phones use the same board
These phones seem good quality, but the company (BLU) has poor quality control. So, bad phones make it into to stores. I bet your phone's memory is corrupted, but you won't have an easy time demonstrating it. Best bet is trying to exchange it for a new one.
It took me 5 minutes to find your stock room
https://clangsm.com/ftpdemo/index.php?dir=Flashes/BLU/Studio G Plus/
The problem is it is not free.
You can still extract your friend's phone system as stated. Please upload it once you retrieve your own phone!
make backup of good studio g plus with scatter file via infinity mtk or other tool and flash bricked one with sptools.
---------- Post added at 09:06 AM ---------- Previous post was at 09:00 AM ----------
need s500q 02 rom backup mt6580, i have s500q but not the 02 version, flashing it to the 02 version will make display white, but everything else still works.
mr64fixit said:
make backup of good studio g plus with scatter file via infinity mtk or other tool and flash bricked one with sptools.
---------- Post added at 09:06 AM ---------- Previous post was at 09:00 AM ----------
need s500q 02 rom backup mt6580, i have s500q but not the 02 version, flashing it to the 02 version will make display white, but everything else still works.
Click to expand...
Click to collapse
thats correct..and the thing is i changed motherboard and display is still white!!!!i have a next model and as i was about to take a backup..thats when this one is stuck on logo!!!!any help would be highly appreciated!!1
need recovery ... custom or stock for studio g plus S510 v10 generic
i lost my recovery for my studio g plus and need to flash one for this phone. available for the studio g but not plus. any help would be greatly appreciated
I have the same phone from Bmobile. I have the 02 version and I am unable to find the stock rom for it.
Who want stock ROM so click: Stock ROM G+ from William Smith or BLU Development Team G+
Who want be a tester for Custom Recoveries so PM me!
Related
THIS WILL ONLY WORK WITH DEVICES USING EMMC PARTITION LAYOUT!
otherwise flashtool cannot properly readback needed files wich will cause a bricked device. for rooting mt6573 or mt6575 without emmc partition layout,
refere to this method by rua1: http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
You need to upload the needed files to your Computer using the Read Page Only feature.
ALSO, MAKE SURE YOUR DON'T TRY THAT ON AN ALCATEL (OR SIMILAR) DEVICE, INDICATOR HERE IS A CUSTPACK PARTITION IN SCATTERFILE.
those devices have mt65xx, but have a totally different partition strukture. You can try this tutorial, BUT IF YOU BRICK YOUR DEVICE; I CANNOT HELP YOU OUT!!!
since a lot of devices have different hardware - e.g. Display or Camera - making a Backup of your device should have highest priority. Flashing a wrong ROM can brick your phone!!
What is needed:
VCOM Driver, thx to n2k1
ADB, thx to n2k1
MTK Droid Tools V2.46
If you wan't to use the newest Versionof MTK Droid Tools, refere to here:
http://forum.xda-developers.com/showthread.php?p=38337401#post38337401
also, you can buy Master Shifu rua1 a coffee for his great tool!
Support for the newest Version of Droid Tools is NOT given in this thread! I personally don't use his tool so if something unexpected happens, its not my fault.
SP Flashtool V3.1224 for mt6589, newer flashtool is needed!!! if there are some problems with reading back or flashing the device, newer flashtool is needed.
Install the needed drivers. installing VCOM drivers might take a while, because it will show up just a few seconds while connecting the phone(off).
and now the Step-by-Step tutorial to backup your boot.img, recovery.img and system.img for rooting.
1. enable USB-debugging under Settings-Development->USB debugging
2. phone should now get recognized as "Android Phone - Android Composite ADB Interface" -> if this is a Unknown Device, you should install the ADB drivers.
3.Open MTK Droid Tools
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Connect device to USB (USB Debugging has to be enabled)
5. Device informations has been loaded, Press on "Blocks Map"
We'll need to find the lines bootimg, recovery and Android. We'll need to write down Start-adress(Scatter) and the Size for every line.
(i made a screenshot, writing down isn't necessary.)
In MY Case, this is:
bootimg: 00F88000 size: 00600000
recovery: 01588000 size: 00600000
Android: 026E8000 size: 31900000
6. Now we'll need to click on "Create Scatter File" and you can save it as "MT6577_Android_scatter_emmc.txt"
7. You can Close MTK Droid Tools now.
8. Now we need to open SP Flash Tool and we need to load the scatter file.
9. Now we'll need to click on "Read Back" in the top of SP Flash Tool.
Click on "ADD" 3 Times, we will create "ROM_0", "ROM_1" and "ROM_2".
10. Doubleclick on "ROM_0", and select a place to save it, e.g. C:/N9770_backup/ and rename it to"boot.img"
11. now it will ask you for the Start Adress and lengh for bootimg, we wrote down earlier.
this is in my case: Start Address: 0x00F88000; Lenght: 0x00600000. the first "0x" MUST remain at its place!
12. the same thing you'll need to do for "recovery" and "android".
13. disconnect, shut down and remove the battery of your Device.
13. Now we'll need to click on "Read Back", insert your battery and connect your device to USB. (VCOM driver is needed now, you'll need to install it before getting to the next steps)
14. if this were correct, a red bar should appear on the bottom of SP Flash Tool. you'll need to wait until the green ring appears.
15.Flash Tool now read back the 3 files. system.img isn't that important, but boot.img and recovery.img should be around 6 MB. if the file is smaller or bigger, the length is different to my device or there was a failure while reading back your firmware. So make sure, that at least recovery or boot.img has the right size!!
16. Back to droid tools. reconnect your device to USB , debugging should be enabled, too. switch to "root, backup, recovery" tab in MTK Droid Tools.
select "to choose the boot.img" and press on "Recovery and boot". select your backup boot.img and recovery,img. MTK droid tools will patch boot.img, so you obtain permanent shellroot.
(optional) a window will pop-up and ask you, if you want to install CWM-r. i cannot tell you if that will work, but you can try it, since you backed up your recovery before. )
(optional) a window will pop-up and ask you for the name of your device(you connected it before starting droidtools, so this should not ask you for the name). you can just press enter or you can enter a name for your device.
17. Droid Tools should have modified the boot.img. "--a task is complete--" text should show up in the right of droidtools.
18. Back to Flashtool
You'll need to load the Scatter (like in Step 8)
select boot.img and recovery.img. make sure you select the modified files. (.../Droidtools/recovery/boot.img and recovery.img)
only boot and recovery should be selected!!
19.disconnect, shout down and remove the battery of your device. press on "Download", a window will show up that you have not selected all images. you can press on "OK".
20. insert the battery and connect your device to USB. Flash process should start and if it worked, green ring will appear.
21. Back to DroidTools. device needs to be connected and debugging enabled. switch to "root, backup, recovery" again and press on "SuperUser". this will push superuser, SU binary and busybox to your device.
22. Your Device is rooted now. you can make a Full backup with Droid Tools now.
thx to n2k1 and tommy0815 for the needed files and the original tutorial!!
if i helped you, don't forget to press on "thanks"
reserved for future updates
Testing on my Acer Z120 MT6575 base, I hope this will work, feedback later *fingers crossed*
FEEDBACK:
It totally worked, My Acer z120 is now rooted.
(optional) a window will pop-up and ask you, if you want to install CWM-r. i cannot tell you if that will work, but you can try it, since you backed up your recovery before.
Click to expand...
Click to collapse
Do not use CWM, it will cause your phone not to boot properly, that is my experience on my phone.
Thanks!
yeah never tested it though, thx for the reply!
Re: [HOWTO][GUIDE] Root & Backup of almost EVERY MT65xx based Device
is there anyone here who tried to follow this thread and successfully rooted his android phone?lenovo s720 user here.waiting for more positive feedbacks.
Will this method work on a Vodafone Smart III (975N) probably with 6575?
Guys, this will work on every mt65xx device, if you installed all drivers sucessfully .this whole thing basically changes a value in Boot.IMG To obtain permanent root in the shell. This is the same on EVERY mt65xx based smartphone. Basically you are rooted now. Just needs To push busybox, su and superuser To your device. Thos whole thing seems complex, but you make a backup oft your modified files before modifiing. I never Had device this tutorial was not working every mt6575, 6577 and 6589 should work without an problem. Mt6573 can be a Problem because oft their YAFFS partition strukture.
Chrizzly92 said:
Guys, this will work on every device, if you installed all drivers sucessfully .this whole thing basically changes a value in Boot.IMG To obtain permanent root in the shell. This is the same on EVERY mt65xx based smartphone. Basically you are rooted now. Just needs To push busybox, su and superuser To your device. Thos whole thing seems complex, but you make a backup oft your modified files before modifiing. I never Had device this tutorial was not working every mt6575, 6577 and 6589 should work without an problem. Mt6573 can be a Problem because oft their YAFFS partition strukture.
Click to expand...
Click to collapse
Thanks, I will try!
Sent from my Samsung I9300 with tapatalk4
thank you for this :thumbup:
Sent from my PICOpad GEW using xda app-developers app
dbius said:
Will this method work on a Vodafone Smart III (975N) probably with 6575?
Click to expand...
Click to collapse
Yes, i rooted my vodafone 975N with this method (CWM recovery working) :good:
Gynekolog said:
Yes, i rooted my vodafone 975N with this method :good:
Click to expand...
Click to collapse
:good: That sounds great! Thx man for the informations!
Edit:
Now i tried to root the phone. Everything is went fine till phase nr.19. At this point when the flashtool tried to write back the modified boot.img and recovery.img it gave back me the attached error window.
What should be the problem? I went through the steps with doublecheck and everything was fine till that point. I tried this step two or three times more, but every time gave me this error message.
What should I do now? If it helps I can upload the log folder content here.
Make sure the scatterfile is correct and the files should not be bigger than 6 MB. Flash tool tells you that you need to flash a full image cause the scatter is different from you phone.
Sent from my Star N9770 using xda app-developers app
Chrizzly92 said:
Make sure the scatterfile is correct and the files should not be bigger than 6 MB. Flash tool tells you that you need to flash a full image cause the scatter is different from you phone.
Sent from my Star N9770 using xda app-developers app
Click to expand...
Click to collapse
!EDIT!
Thanks for your answer!
Tonight I found a newer version for flash tool (v3.1304.0.119). Using that version rooting the phone was successful, so thanks, finally it worked.
VCOM Ports
Gynekolog said:
Yes, i rooted my vodafone 975N with this method :good:
Click to expand...
Click to collapse
I still cant root my device. I think its the VCOM ports, because i cant flash
When i click "Read Back" the device is not there..
Can you help me?
Thanks!
This will be very helpful. I have a china phone running on MT6577. I've successfully installed a ported V970 ROM to ZA-985 (which is compatible to my unit in terms of hardware and appearance). I wanna try porting a JB V970 Lewa OS ROM to Kata i1 (identical to ZA-985).
dbius said:
!EDIT!
Thanks for your answer!
Tonight I found a newer version for flash tool (v3.1304.0.119). Using that version rooting the phone was successful, so thanks, finally it worked.
Click to expand...
Click to collapse
thx for your reply, i updated Post #1 , that for mt6589 newer flashtool is required nad sumtimes youll need to play with them. this is because the widely spread devices, they are not the same and sometimes big differences in partitionlayout, SoC revision and so on.
@verntechguy: after rooting, make sure you get a full backup of your device using mtk droid tools. porting lewa is not that hard, but you maybe need to try different platforms to port from. you can refere to here, master shifu yuweng made a pretty good tutorial abut porting Roms.
@Beirajunior: is your device recognized as "mt65xx preloader" when connection to USB? (phone should be off) if not, you can try pressing VOL Up or down while connecting to USB. for flashing, VCOM port 1-16 should be assigned to the drivers.
6
Chrizzly92 said:
thx for your reply, i updated Post #1 , that for mt6589 newer flashtool is required nad sumtimes youll need to play with them. this is because the widely spread devices, they are not the same and sometimes big differences in partitionlayout, SoC revision and so on.
@verntechguy: after rooting, make sure you get a full backup of your device using mtk droid tools. porting lewa is not that hard, but you maybe need to try different platforms to port from. you can refere to here, master shifu yuweng made a pretty good tutorial abut porting Roms.
@Beirajunior: is your device recognized as "mt65xx preloader" when connection to USB? (phone should be off) if not, you can try pressing VOL Up or down while connecting to USB. for flashing, VCOM port 1-16 should be assigned to the drivers.
6
Click to expand...
Click to collapse
Can you help me by team viewer ? :x i still cant do the flash..and the phone is reconized as "mt65xx preloader" but after a while he disconect.
My email is: [email protected]
I appreciate any help.
Cheers
no, i cannot help you via teamviewer, my internet connection is too slow, cause i`m on tethering. some additional infos will be helpfull. device? mt6573,75,77,89?
if the device gets found, everything should work. you`ll need to assing the VCOM ports. just look in the driver settings or google it. i`m sure there is some kind of tutorial for it. also, trying another PC or OS will help, too. alot of guys have problems with that, just switching to XP or so will mostly help without tweaking the drivers.
device should be disconnected and battery should not be inserted. now press readback in flashtool, insert battery and connect the device to USB. now phone should be found by flashtool. if not, like i said, check VCOM ports.
Chrizzly92 said:
no, i cannot help you via teamviewer, my internet connection is too slow, cause i`m on tethering. some additional infos will be helpfull. device? mt6573,75,77,89?
if the device gets found, everything should work. you`ll need to assing the VCOM ports. just look in the driver settings or google it. i`m sure there is some kind of tutorial for it. also, trying another PC or OS will help, too. alot of guys have problems with that, just switching to XP or so will mostly help without tweaking the drivers.
device should be disconnected and battery should not be inserted. now press readback in flashtool, insert battery and connect the device to USB. now phone should be found by flashtool. if not, like i said, check VCOM ports.
Click to expand...
Click to collapse
Hi,
Im already done, but im receiving this error when i try to modified the backuped files (boot and recovery) on MTK Droid Root.I sai no to similar CWM, and i get this error:
"--- ERROR :Boot unthe public mailing list [email protected]"
" --- task is complete ---"
What do you suggest ?
Cheers!
what SoC? mt6573?
Hi my friends In this guide i will teach you how to root your Jiayu g5s+
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Steps:
1.Drivers
2.Rooting
3.backup with mtkdroidtools
4.Install cwm through mtkdroid tools
1.DriversDownload the drivers and mtkdroidtools from here : https://mega.co.nz/#!z9oXgCpD!5Vil8gYSC3rwUdTIImt0PYKRObbZVc17i4GpVx7RKQw
extract the archive and connect your phone with debugging enabled
then go to start and type device manager you will see that adb driver arent installed double click on it locate usb folder you extracted and your done
or google how to install adb drivers
2.RootingThere are many tools to root this phone
the tools you can use to root your jiayu are
1.Cydia Impactor
2.Kingoroot <-i recommend this how to root go here -> http://androidxda.com/root-android-device-using-kingo-root
3.Vroot <-Becareful this one is backdoored run it via sandboxie http://sandboxie.com/
3.Backup with mtkdroidtoolsdownload scatter file https://mega.co.nz/#!KwpWURQC!8CGoDjsE-BsGwBOT08Ljzu9XsXlfIFo3uBKRYb-VvaU and put in mtkdroid tools directory
copy scatter also in backup directory of your phone
open mtk droid tools connect phone with usb debugging enabled then go to "root,backup,recovery" tab click on backup and wait till its funished
then click on "to prepare blocks for flash tool" then choose files.md5 and wait till its finished
4.cwm recoverythere are many tools you can use to install cwm recovery
but these two i used are good
1.open mtk droid tools go to "root,backup,recovery" tab click on "recovery and boot" button
Please check always your phone the tools ask you for revoke acces you have to allow them
2.Easy Magic PhilZ Touch Installer for MediaTek Devices ONLY
http://forum.xda-developers.com/showthread.php?t=2748169
Download here my backup : https://mega.co.nz/#!DlhEGKJC!GJYxUBaJIaiEMuqnCMmctgO7XYnvcrlpo9aJ1S1wCac
Many thanks my friend, you have saved my phone, it works correctly now
We will keep alive this thread for any news for this phone.
Again, thank you very match.
Amazing timing, I just started looking for ROMs for this phone yesterday and today you post!
Subscribed for future updates
Have any one problemes with TitaniumBackup ?
I can not backup any thing, restore any things !
the sdcard contains already app backups (from an other phone) TB already see them but no way to restore.
bricked Jiayu G5S+ (Elephone P6i)
Hi!
I tried to change the ROM for a friend's fake Jiayu G5S+ phone (a have some previous experience with flashing ROMs but neither me and especially my friend didn't know about this being a fake) so I tried to flash a G5S ROM and the phone now is bricked. The SP_Flash stops after the red stripe, "DA Download 100%" and that is all. From time to time I hear the sound of a new connected device in my PC speakers and the MTK USB port reappears in Device Manager.
Any idea how could I revive this phone, even it is a fake ?
My friend is very sad as I ruined his phone. Anyway, he couldn't use it with the original ROM because the touchscreen keyboard wasn't calibrated, he could not type almost anything.
L.E.: I tried to flash the backup that Gr4nDT3R0R posted above, now I get this error BROM ERROR: S_CHIP_TYPE_NOT_MATCH. I guess the ROM is not for my chip(set):
In the picture, I see that you do not provide the preloader.bin, you must give it (it is a part of the backup).
Then you have also to provide android, cache and data images, even from other ROM (system.img is in the backup, and you can extract cache.img and userdata.img from an p6i ROM)
Use, as you do, "format all + download" and it must works (if your phone is JY-G5S+, otherwise, use an entire ROM from elephone p6i)
Sent from my ZOPO ZP990+ using XDA Free mobile app
Yes, it might be wrong what I showed in that picture, I guess I tried a dozen of times to flash different ROMs. Today I finally managed to flash the original ROM provided by the author of this topic. It seems that after plugging in the phone to the USB port, right after the "ding-dong" sound you have to insert the battery. So I could see the so long waited yellow bar. After this I used the MTK Droid Tools and which showed that in fact the phone is a Quad Core MTK i6, 4.4.2, ALPS.KK1.MP1.v2.13 phone (instead of Jiayu G5S+, full HD screen, octa core...). I don't know how but after repeated tries now the phone is showing the real specs in About phone section.
Anyway, the reason I tried to change the ROM is that the touchscreen is acting weirdly, it is not calibrated, it is impossible to tap a text using the virtual keyboard. Even the menu items are very hard to tap as they don't respond to touching but the ones from vicinity. I have found a few recent videos with the same problems on Youtube but none have the solution. The screen is 540x960 and I guess the LCD driver is not the proper one.
Right know I am glad I managed to revive my friend's phone but I am pretty sad of his loss (I recommended him to by another trusted phone but he wouldn't listen to me).
Maybe in time, some smart guys will find any workaround for these Jiayu G5S+ fakes.
Jiayu g5s+ fake
Hi I Jiayu G5S + fake. I downloaded the rom elephone P6I update. The sp falasha tool I put the firmware upgrade. All went well. But the phone is now dead. When I try to give my deposit so still lists the error. If you give the firmware upgrade takes place so blue about three times and then prints cheksum failed. If so I will just download again writes PMT changed for the rom, it must be downloaded. Please if anyone know help us some advice.
fake Jiayu G5s+
doldik611 said:
Hi I Jiayu G5S + fake. I downloaded the rom elephone P6I update. The sp falasha tool I put the firmware upgrade. All went well. But the phone is now dead. When I try to give my deposit so still lists the error. If you give the firmware upgrade takes place so blue about three times and then prints cheksum failed. If so I will just download again writes PMT changed for the rom, it must be downloaded. Please if anyone know help us some advice.
Click to expand...
Click to collapse
sorry for my english
I'd done so.
I used this version of SP.FlashTool v3.1320.0.174.
In addition to the files for flashtool is in this post, add the two missing (cache and userdata) of this rom.
http://www.needrom.com/download/elephone-p6i/
Then select all and give a firmaware upgrade and also mark "DA DL All whit check sum" and has to work.
luck:good:
:good::good::good::good::good::good:
Super. Already mobile lives. It is everything. Your procedure is a 100%. Had 24 hours of suffering.
I also do not know English. I am from Slovakia.
Once again many thanks.
doldik611 said:
:good::good::good::good::good::good:
Super. Already mobile lives. It is everything. Your procedure is a 100%. Had 24 hours of suffering.
I also do not know English. I am from Slovakia.
Once again many thanks.
Click to expand...
Click to collapse
Glad many, it is a pleasure to help
Just do not understand why he had killed the recording rom from elephone P6I.Everything passed smoothly until final confirmation.Everything passed smoothly until final confirmation. I used SP_Flash_Tool_v5.1352.01.A choice of upgrade.Through net download it would not let me on.Well, after reboot phone has not responded to anything.Then somehow after about 50 experiment has released a record at least preloader.The display has been seen batteries.Again, after several attempts we have recorded the entire archive.But the phone cycles through the android logo.They let me into the start menu via the minus button and start.No I did not find the file from the backup to SD card.Meanwhile told me the phone and I revived to full finery.I also tried older flash tool, but not load file scater.I wanted to remove the fake hardware information.Therefore, I recorded the rom elephone.And he made I have a lot of joy instead of worry.I did not know that the phone is fake when buying.But when I gave her ignorance was added resellers deceive my next concern.I do not know what a cell phone.What is hardware and what rom fit into it.I would be grateful if someone figured out how rom is good for this model.
fake
doldik611 said:
Just do not understand why he had killed the recording rom from elephone P6I.Everything passed smoothly until final confirmation.Everything passed smoothly until final confirmation. I used SP_Flash_Tool_v5.1352.01.A choice of upgrade.Through net download it would not let me on.Well, after reboot phone has not responded to anything.Then somehow after about 50 experiment has released a record at least preloader.The display has been seen batteries.Again, after several attempts we have recorded the entire archive.But the phone cycles through the android logo.They let me into the start menu via the minus button and start.No I did not find the file from the backup to SD card.Meanwhile told me the phone and I revived to full finery.I also tried older flash tool, but not load file scater.I wanted to remove the fake hardware information.Therefore, I recorded the rom elephone.And he made I have a lot of joy instead of worry.I did not know that the phone is fake when buying.But when I gave her ignorance was added resellers deceive my next concern.I do not know what a cell phone.What is hardware and what rom fit into it.I would be grateful if someone figured out how rom is good for this model.
Click to expand...
Click to collapse
http://service.elephone.hk/forum.php?mod=forumdisplay&fid=98#.VGzQbvmG8Zn
looking here
Thanks.You do not have to quote such a long post.
Original rom for ELPHONE not want to work. I run the risk of custom rom?
doldik611 said:
Thanks.You do not have to quote such a long post.
Original rom for ELPHONE not want to work. I run the risk of custom rom?
Click to expand...
Click to collapse
developments???io find nothing , the custom MIU , goes just as bad , I've tried, and locks the touch
You have Jiayu G5S +?Use the old rom how did you get it?You rom works by elephone P6I?
doldik611 said:
You have Jiayu G5S +?Use the old rom how did you get it?You rom works by elephone P6I?
Click to expand...
Click to collapse
Yes, I hold Jiayu G5S +, but I do not keep the rom originale.l'ho lost by putting a rom Jiayu G5S original (wrong) and I raised up with this post.
you have the original rom Jiayu G5S + ?????
Have a little different.Because I put the factory settings.And then I made a backup.When you try to load the rom elephone I had a brick.After recording my backup files from + 2 elephone I do not have computer and boot logo Jiayu, but android.Rom of elephone not want to work.I tried to put preloader.bin from my backup, but hangs at log elephone.
The information on phone type I: i6 and quad core.
Online test of CPU-Z as follows: http://valid.canardpc.com/a/2amvfb
doldik611 said:
Have a little different.Because I put the factory settings.And then I made a backup.When you try to load the rom elephone I had a brick.After recording my backup files from + 2 elephone I do not have computer and boot logo Jiayu, but android.Rom of elephone not want to work.I tried to put preloader.bin from my backup, but hangs at log elephone.
The information on phone type I: i6 and quad core.
Online test of CPU-Z as follows: http://valid.canardpc.com/a/2amvfb
Click to expand...
Click to collapse
we get closer to the truth.
try this (looks much better).
You'll say
http://www.needrom.com/download/zlr-i6/
I tried and the phone did not work - brick.I do not remember what rom would be good.To show the actual hardware.And there are still other data.We do not know what brand and model really is.While we remain in a false indication.Therefore, I would like to prefer the original rom.I did not have to look for information under the designation as a fake.So no elephone P6I.It just seems so outwardly.But (intestines) hardware is different.Perhaps better, but also can be worse.While this is a mystery.:laugh:
I have two of the units mentioned in the thread title. One simply is stuck at the Alcatel logo after a reboot. I can get into the stock recovery, have done a factory reset (plus cache), but still just stuck at the logo. I've also popped it open and unplugged the battery (it's the attached kind), but still back at a logo after everything was back together.
I mentioned that I had two because the other one is working fine and available to use for a firmware dump. The issue I'm running into is that a cat /proc/mtd command returns no partitions (just blank) and there is no emmc on this unit. From what I've read, bad Chinese firmwares sometimes do not report out partition tables from mtd. So, all the guides I've found for using MTK Rom Studio, MTK Droid Tools, and SP Flash Tool don't work for me (at the moment) because I cannot produce a firmware.info or scatter file, due to mtd not populating the required info. Also, from what I gather, there is no firmware file available for this. I've tried using the Mobile Upgrade program from Alcatel, but it reports that the ROM is the most up-to-date and then quits. Yay.
Any help or insight would be greatly appreciated. I'm not desperate or anything; just hoping to get this one back working is all.
my_former_self said:
I have two of the units mentioned in the thread title. One simply is stuck at the Alcatel logo after a reboot. I can get into the stock recovery, have done a factory reset (plus cache), but still just stuck at the logo. I've also popped it open and unplugged the battery (it's the attached kind), but still back at a logo after everything was back together.
I mentioned that I had two because the other one is working fine and available to use for a firmware dump. The issue I'm running into is that a cat /proc/mtd command returns no partitions (just blank) and there is no emmc on this unit. From what I've read, bad Chinese firmwares sometimes do not report out partition tables from mtd. So, all the guides I've found for using MTK Rom Studio, MTK Droid Tools, and SP Flash Tool don't work for me (at the moment) because I cannot produce a firmware.info or scatter file, due to mtd not populating the required info. Also, from what I gather, there is no firmware file available for this. I've tried using the Mobile Upgrade program from Alcatel, but it reports that the ROM is the most up-to-date and then quits. Yay.
Any help or insight would be greatly appreciated. I'm not desperate or anything; just hoping to get this one back working is all.
Click to expand...
Click to collapse
I'm not sure how to fix your device without knowing more about it. Is it possible you could provide the firmware dump of the one that is working? I was interested in using such to get a working TWRP recovery going for this model. With a working recovery, might be able to do more for your bricked unit.
I can provide some of the images - a noted exception is for the System partition, as I have already mucked with that one while doing my experimentation with my own.
If you already have the working one rooted, I would suggest just using dd and looking under /dev/devices/by-name (I think that is what it is called) which should provide you access to the partitions you need and what they are called.
titanshadow said:
I'm not sure how to fix your device without knowing more about it. Is it possible you could provide the firmware dump of the one that is working? I was interested in using such to get a working TWRP recovery going for this model. With a working recovery, might be able to do more for your bricked unit.
I can provide some of the images - a noted exception is for the System partition, as I have already mucked with that one while doing my experimentation with my own.
If you already have the working one rooted, I would suggest just using dd and looking under /dev/devices/by-name (I think that is what it is called) which should provide you access to the partitions you need and what they are called.
Click to expand...
Click to collapse
Thanks for the reply. Let me see what I can do. This model is very odd, I have to admit. The fact that it does not use emmc, but instead mtd, yet a cat /proc/mtd produces nothing is baffling to me.
my_former_self said:
Thanks for the reply. Let me see what I can do. This model is very odd, I have to admit. The fact that it does not use emmc, but instead mtd, yet a cat /proc/mtd produces nothing is baffling to me.
Click to expand...
Click to collapse
What you're trying to do is for older MTK phones....as in like everything not just the cat /proc/mtd.
What you have to do it make a backup of your working tab and flash the brick tab with the back up.
Here's some links that can help you:
MTK Preloader drivers for Win 7- https://thebroodle.com/microsoft/win...rs-in-windows/
MTK Preloader drivers for Win 10- http://laurentiumihet.ro/windows-10-...tion-tutorial/
How to create a scatter file- https://androidmtk.com/create-scatte...or-mtk-devices
How to make a backup of your phone/ROM- https://forum.hovatek.com/thread-526.html
After making a backup, restore your ROM_0 backup using this method-----> http://forum.xda-developers.com/showpost.php?p=65784715&postcount=953
Check out this thread as it relates to all things Pixi----> http://forum.xda-developers.com/android/general/root-alcatel-one-touch-pixi-34-official-t3193624
Good luck
Can I get a copy kind that back up
kirito9 said:
What you're trying to do is for older MTK phones....as in like everything not just the cat /proc/mtd.
What you have to do it make a backup of your working tab and flash the brick tab with the back up.
Here's some links that can help you:
MTK Preloader drivers for Win 7- https://thebroodle.com/microsoft/win...rs-in-windows/
MTK Preloader drivers for Win 10- http://laurentiumihet.ro/windows-10-...tion-tutorial/
How to create a scatter file- https://androidmtk.com/create-scatte...or-mtk-devices
How to make a backup of your phone/ROM- https://forum.hovatek.com/thread-526.html
After making a backup, restore your ROM_0 backup using this method-----> http://forum.xda-developers.com/showpost.php?p=65784715&postcount=953
Check out this thread as it relates to all things Pixi----> http://forum.xda-developers.com/android/general/root-alcatel-one-touch-pixi-34-official-t3193624
Good luck
Click to expand...
Click to collapse
Thanks. Sorry for the ridiculous delay; life happened. Anyways, I cannot create a scatter file (from the working unit), just as before.; it gives me no partitions.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Alcutel pixi 3 (7) 4G 9007T tablet soft bricked
decided to play around with cleaning up the bloatware and Sprint installed junk on my Alcutel one touch pixi 3 (7) 4G 9007T tablet running originally android 5.1.1 , and ended up soft bricked stuck in a loop cycle of optimizing/staring apps, have scoured XDA and every other resource i have seen and for every device but this one there seems to be a fix, a stock rom, etc ,... one good thing is i am able to factory reset to at least enable debugging for adb access (though fastboot wont detect it) and hence cant get the device into a fastboot mode or unlock the loader.
Is there any compatible roms or recoveries out there for this particular device
Recovery <3e> Android L(not sure how to get a recovery log dump for providing more info)
I used nobloat app from google play had things pretty well cleaned up but thought to see how far i could go and i used the backup function in the app, but evidently i deleted something I shouldn't have and of course after trying a factorry rest the nobloat backup would be gone even if i could get botted back up)
after recovery I do get through the intitial setup, wifi, google account login etc,.. (using safemode) but if i use google backup files it gets to the loop fast, so i try to skip all that being restored, and am able to get to the settings to enable developer mode /debugging mode but once I exit that its a blank screen outside the clock showing then it reboots and keeps in the abov mentioned loop.
(as i mentioned adb detects the device but fastboot won't it just stuck on "waiting for any device"
Hey guys , i m trying to root the OUKITEL K6000 PRO but i cant make it. I 've searched in the net a lot, used (i think) all the tutorials (kingoroot, rootgenius, towelroot, rootkhp, android_root) but still i cant root it. If anyone has a hint i would appreciate it a lot, thanks for your time
How To ROOT
Please contact me I'll teach you, I posted a tutorial but the xda forum prevents me to send you the download links, [email protected]
Hello! I'm having problems to do root in my k6000 pro. Any news about this?
Hi there, any update on this?
Any update on this?
I need to know this as well. Can some one help. Found something here but it is in spanish:
http://www.movilesdualsim.com/tema/supersu-k6000-pro.140140/#post-1580954
Can someone translate it please if this is valid?
Found a french guide if anyone care to translate and post here please:
http://www.phonandroid.com/forum/ouiktel-k6000-pro-android-6-3g-ram-32g-avec-su-et-twrp-t151298.html
Okay I found this English guide and I have successfully install TWRP and Chainfire root.
I have followed this article and it works.
http://www.needrom.com/download/twrp-3-0-2-1-k6000-pro/
This is specs of Oukitel K6000 Pro:
SoC: MediaTek6753
CPU: MTK6753 Octa Core 1.3GHz
Build Number: OUKITEL_K6000_Pro_V8.0_20160607
Here is the screenshot from sp flash tool during the download process of TWRP to phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
See the root status:
Root OK
Xposed OK
TWRP OK
And now an official x64 rom and also the 1st custom rom xOS appeared a few days ago.
hi everybody i have maked a mistake to root oukitel k6000pro...i have opened the flash tool...i added the scatter ....clicked Download...all good....and then....i'm going to open the phone and is not opening....i'm very crazy for this (( what can i do...please help meee !!!!!!!!!!!!!!!!!!
My phone has damaged after fashing the TWRP the device doesn't reboot
hello! my phone Oukitel K6000 pro how TWRP and Root please tell kind of TWRP version& root step by step Thank you.....
Hi friends,
I have few question :
1. know anyone what is difference between Clasics ROM and FZ ROM (newer phones coming with FZ ROM)
OUKITEL K6000 Pro FZ V11 20161119
OUKITEL K6000 Pro ROM V9.0 - 2016.09.24
2. I install FZ ROM to my phone with Clasics ROM without problem phone is working.
3. NEW phone: In android recovery mode is test "Root Integrity Check" Every time if i run this test i receive message
"Error: found 9 new files / System chceck FAIL!!" same error with original Clasic ROM and same error with FZ ROM
Thank You
Guys, this can be solved. If you have the mediatek drivers correctly installed, and then the driver signature deactivated (follow this tehnotone.com/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation-tutorial/ ).
Download firmware with scatter file from here: .needrom.com/download/oukitel-k6000-pro-v12/
TURN OFF THE PHONE (make sure is no background light, some times when the phone is dead ocurre this when pressing power botton)
After that use sp flash tool, Load scatter file and in the Format tab mark Validation, Autoformat flash and Format whole flash
conect the phone to the usb
Disconect the phone
On the Download tab, select Format all+Download
And this is it! OUKITEL K6000 PRO come back to live
Sorry for my strange english
One more thing, you will lose your imei,and there is no CDS option to change it.
You need to root the phone to asign an imei.
---------- Post added at 01:02 AM ---------- Previous post was at 12:48 AM ----------
babardy said:
My phone has damaged after fashing the TWRP the device doesn't reboot
Click to expand...
Click to collapse
Guys, this can be solved. If you have the mediatek drivers correctly installed, and then the driver signature deactivated (follow this tehnotone.com/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation-tutorial/ ).
Download firmware with scatter file from here: needrom.com/download/oukitel-k6000-pro-v12/
TURN OFF THE PHONE (make sure is no background light, some times when the phone is dead ocurre this when pressing power botton)
After that use sp flash tool, Load scatter file from downloaded folder, and in the Format tab mark Validation, Autoformat flash and Format whole flash and click start
connect the phone to the usb
wait to finish (ok messege)
Disconnect the phone
On the Download tab, select Format all+Download and click Download
Connect the phone to the usb
what to finish (ok messege)
disconnect and power on
And this is it! OUKITEL K6000 PRO come back to live
Sorry for my strange english
One more thing, you will lose your imei,and there is no CDS option to change it.
You need to root the phone to asign an imei.
oukitelk6000 said:
Guys, this can be solved. If you have the mediatek drivers correctly installed, and then the driver signature deactivated (follow this tehnotone.com/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation-tutorial/ ).
Download firmware with scatter file from here: .needrom.com/download/oukitel-k6000-pro-v12/
TURN OFF THE PHONE (make sure is no background light, some times when the phone is dead ocurre this when pressing power botton)
After that use sp flash tool, Load scatter file and in the Format tab mark Validation, Autoformat flash and Format whole flash
conect the phone to the usb
Disconect the phone
On the Download tab, select Format all+Download
And this is it! OUKITEL K6000 PRO come back to live
Sorry for my strange english
One more thing, you will lose your imei,and there is no CDS option to change it.
You need to root the phone to asign an imei.
---------- Post added at 01:02 AM ---------- Previous post was at 12:48 AM ----------
Guys, this can be solved. If you have the mediatek drivers correctly installed, and then the driver signature deactivated (follow this tehnotone.com/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation-tutorial/ ).
Download firmware with scatter file from here: needrom.com/download/oukitel-k6000-pro-v12/
TURN OFF THE PHONE (make sure is no background light, some times when the phone is dead ocurre this when pressing power botton)
After that use sp flash tool, Load scatter file from downloaded folder, and in the Format tab mark Validation, Autoformat flash and Format whole flash and click start
connect the phone to the usb
wait to finish (ok messege)
Disconnect the phone
On the Download tab, select Format all+Download and click Download
Connect the phone to the usb
what to finish (ok messege)
disconnect and power on
And this is it! OUKITEL K6000 PRO come back to live
Sorry for my strange english
One more thing, you will lose your imei,and there is no CDS option to change it.
You need to root the phone to asign an imei.
Click to expand...
Click to collapse
You are my hero, i have trying to fix my phone for hours and your description is perfect, thank you so much :highfive:
As there is no sub-form for this phone, I am going to piggyback off of this due to the keywords and such... But.. Does anyone have issues with getting anything more than EDGE network from within the USA? Namely TMobile. I checked the freq's the phone and TMO uses and most match up with a few missing on the LTE side, but utilizing one at least... But I have not been able to get anything past EDGE connection, and that won't even pull web pages... Any ideas?
And there is a way to root the new k6000 plus?
Truzzman2 said:
And there is a way to root the new k6000 plus?
Click to expand...
Click to collapse
wrong thread
Okitel k 6000 pro os
Greetings!
What would be safe to use to unlock root access for
OUKITEL_K6000_Pro_FZ_V12_20161129_211434
?
There doesn't seem to be anything specifically for this version at...
https://www.needrom.com/category/oukitel/k6000-pro/
-- There are releases for somewhat earlier or later versions. Releases with more positive feedback and ratings are not chronologically the closest to '20161129_211434' available.
Thank you in advance!
All the best!
Unbrick Maze Alpha X 6/64GB only phone is black screen and phone is total brick (format all partition).
https://drive.google.com/file/d/12t3MHsAWBlXyKm_ktJt9GKqZ9sOrFRVi/view
Rom is no official :
System : official rom for Maze Alpha B6/64GB . (! no update after - OTA !!),
boot, logo and recovery is normal (copy from original my phone).
Good luck.
Sorry for bad english, my french ^^
File not found on your drive
https://drive.google.com/file/d/12t3MHsAWBlXyKm_ktJt9GKqZ9sOrFRVi/view?usp=drivesdk
full rom V03 6/64GB Rom Ofifcial Stock
https://drive.google.com/file/d/1WjXKj8abnghy_OjfUW5TYkAppjWg0amH/view?usp=sharing
Stive87 said:
Unbrick Maze Alpha X 6/64GB only phone is black screen and phone is total brick (format all partition).
https://drive.google.com/file/d/12t3MHsAWBlXyKm_ktJt9GKqZ9sOrFRVi/view
Rom is no official :
System : official rom for Maze Alpha B6/64GB . (! no update after - OTA !!),
boot, logo and recovery is normal (copy from original my phone).
Good luck.
Sorry for bad english, my french ^^
Click to expand...
Click to collapse
Update ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rafaello21 said:
Update ?
Click to expand...
Click to collapse
update possible for official rom :
full rom V03 6/64GB Rom Ofifcial Stock
https://drive.google.com/open?id=1WjXKj8abnghy_OjfUW5TYkAppjWg0amH
I am looking for a stock rom of The Alpha X 6/128.
Have you any news ?
Thanks!
Originally posted here
Flash v03, root and recover lost IMEI
I have the 6/64 version. I'll share my method with you. The only one that didn't stuck me in booting TWRP over and over again.
First, I used fastboot flash recovery recovery.img and immediately after fastboot flash boot boot.img . It's the only way I managed to escape the problem. Now, I flashed the ROM provided by them, linked in this post here #123 and I lost IMEI. I used chamelephon to insert IMEI and the IMEI is there but I can't get any signal. What to do?!
Later edit: that didn't work the second time I tried. Neither camelephon.
New method: The last thing I tried was also successful. So, I flashed the ROM they gave me (coolicool store), which you can find here. I selected "auto flash" and "except bootloader" options in SP Flash Tool, pressed "start" and let it on for 3 second and pressed "stop". Then I selected "format all+download", pressed download and connected my phone while holding VOLUME UP. I kept it pressed a few seconds after seeing the red bar getting to 100%. After flashing I started the phone and installed the latest version OTA, v04. After updating I flashed recovery by fastboot flash recovery recovery.img. Of course, I was stuck in booting in TWRP like every other time so I thought of recovering boot from a backup, and since I didn't have one of my own, I used the one provided by @dreambo found here (thanks dude). When I was prompted to select the items I want to recover, I thought of choosing only "boot", in order to restore boot, but I said why not try restoring "nvram" and "nvdata" too, maybe it will solve my other problem , the lost IMEI problem. And it worked.
I finally succeeded to restore my IMEI and boot, thanks to a recovery, which, now I see, is mandatory before every modification you implement on your phone. Especially when you don't have original ROM.
Sorry for the long post and I hope it comes in handy
Stive87 said:
Unbrick Maze Alpha X 6/64GB only phone is black screen and phone is total brick (format all partition).
Rom is no official :
System : official rom for Maze Alpha B6/64GB . (! no update after - OTA !!),
boot, logo and recovery is normal (copy from original my phone).
Good luck.
Sorry for bad english, my french ^^
Click to expand...
Click to collapse
I have a Maze Alpha X 64GB in which I can only see a black screen will not turn on at all. Only the red charging LED light turns on to say that the phone is charging and connected to the computer.
I have tried flashing the ROM in the link in your post in this thread but only receive BROM errors in the SP Flash Tool.
I have tried the second link full rom V03 6/64GB Rom Official Stock as well but this one does not have a Preloader so I cannot use this ROM to unbrick my phone as my phone will not turn on it needs a Preloader for the phone to turn on.
My phone is being detected by my computer as it makes a sound when connecting the USB cable and also shows up in the Device Manager. Have also tried another computer and tried another USB Type-C cable but only receive BROM errors in the SP Flash Tool.
I have also uninstalled and re-installed the latest Mediatek drivers.
Any ideas?
I'm pretty sure it does have a preloader, since I have used it twice to install with SPFlash Tools.
amonapophis said:
I'm pretty sure it does have a preloader, since I have used it twice to install with SPFlash Tools.
Click to expand...
Click to collapse
This ROM does not contain a Preloader:
full rom V03 6/64GB Rom Ofifcial Stock
That ROM would work if your phone is turning on. My Maze Alpha X does not turn on at all hence the need for a ROM that has a Preloader so that I can get the phone to turn on again.
I have tried the ROM in the first post in this thread I keep getting "could not get PMT info" error messages in the SP Flash Tool. That ROM has a Preloader included.
I have installed the Mediatek drivers that are on the Maze Mobile Download Center and have tried different computers with different USB Type-C cables with no luck. My Maze Alpha X is still dead and won't turn on only the red charging light turns on and stays on when connected to USB or Mains. The charging light does not go green to show that the phone is fully charged even if the phone has been plugged in for 6 to 8 hours.
Any ideas?
Don't use the one provided by OP. Use the one I got from Maze, it's complete. Download here, it's the official version. I haven't tested the one provided by OP, but the one posted by me here is the one that works. You will find a folder named 18-02-06... and inside one named R14. There you will find all the files needed, including preloader. I have to warn you, though, you will lose IMEI by flashing it ( I don't know why) and the method to restore it is quite complicated, but I wrote it above. Good luck restoring your phone!
shinystar77 said:
This ROM does not contain a Preloader:
full rom V03 6/64GB Rom Ofifcial Stock
That ROM would work if your phone is turning on. My Maze Alpha X does not turn on at all hence the need for a ROM that has a Preloader so that I can get the phone to turn on again.
I have tried the ROM in the first post in this thread I keep getting "could not get PMT info" error messages in the SP Flash Tool. That ROM has a Preloader included.
I have installed the Mediatek drivers that are on the Maze Mobile Download Center and have tried different computers with different USB Type-C cables with no luck. My Maze Alpha X is still dead and won't turn on only the red charging light turns on and stays on when connected to USB or Mains. The charging light does not go green to show that the phone is fully charged even if the phone has been plugged in for 6 to 8 hours.
Any ideas?
Click to expand...
Click to collapse
amonapophis said:
Don't use the one provided by OP. Use the one I got from Maze, it's complete. Download here, it's the official version. I haven't tested the one provided by OP, but the one posted by me here is the one that works. You will find a folder named 18-02-06... and inside one named R14. There you will find all the files needed, including preloader. I have to warn you, though, you will lose IMEI by flashing it ( I don't know why) and the method to restore it is quite complicated, but I wrote it above. Good luck restoring your phone!
Click to expand...
Click to collapse
I have tried that link just now downloaded and installed everything properly followed the instructions to a tee but still get the same errors.
I have installed the Drivers that came with the ROM that you have given to me which like you said are official directly from Maze but this has not made a difference for my Maze Alpha X 64GB.
I tried flashing with the Maze Alpha Flash Tool but just receive a DA error:
I tried flashing with the SP Flash Tool but receive a failed to get PMT info error:
Any Idea as to what I am doing wrong here or is my phone just hard-bricked?
I have noticed that on SPFT you selected "firmware upgrade". You should use "format all and download". Maybe this fixes your problem. I am not that much of a techie but I hope you will solve your problem.
amonapophis said:
I have noticed that on SPFT you selected "firmware upgrade". You should use "format all and download". Maybe this fixes your problem. I am not that much of a techie but I hope you will solve your problem.
Click to expand...
Click to collapse
I have tried Format All + Download but get this error:
I have also tried Download only but get this error:
shinystar77 said:
I have tried Format All + Download but get this error:
I have also tried Download only but get this error:
Click to expand...
Click to collapse
I'm sorry to hear that. Unfortunately, this forum seems dead and I can't help you, since I don't know that much either... It might help if you get to those phone servicing shops.