Hi all,
I got this S2 today, did unlock and root, when tried to load CMW in recovery mode,did mistake and run update form sdcard. I guess, I had old stuff on sdcard. So now I cannot get out from there at all, I tried to reboot or power off option, but it just sit there and does nothing. Tried to remove battery and reboot, it takes me back to CMW recovery. Please, help me to fix this matter.
---------- Post added at 01:37 AM ---------- Previous post was at 01:22 AM ----------
I tried to get in Downloading mode and install Lite'ning Rom v6.1 XXKH3, it went though, but after reboot I got into ClockworkMode Recovery again
Hmmmm, this is very weird, if you can get into download mode, you should try flashing a stock rom, and not Lightening Rom....
Thnx, I got it fixed. I am coming from Samsaung Captivatre and button there are diiferent combination as navigation vise. Stupid me.
Alright so my current issue is very strange. I was trying to install cm10.1 on my HTC One X+ ATT and I got it on there yet it has some issues. Those issues in particular being that it reboots every few minutes, and I cannot get it to mount as a mass storage device. If someone can help me with either of those issues that would be great, but I would rather just flash back to stock if possible. My boot loader is currently unlocked and I don't think I even have a rom on here anymore. Any and all help is appreciated, I really need to get this fixed!
1. Download stock rom or any rom onto phone and computer
2. Extract boot.img
3. Boot into fastboot and flash the boot.img
4. Boot into recovery and...
- wipe data/factory reset
...then flash the rom.zip
5. Reboot.
---------- Post added at 11:10 PM ---------- Previous post was at 11:08 PM ----------
The issues on the rom will only be fixed by the dev. These are known bugs.
Hi,
My phone boots to TWRP recovery only. I can boot into TWRP recovery, flush any ROM and set it up but after reboot my phone is not coming up.
It boots to the Samsung logo with BLACKSTAR BLACKJELLY ROM or to the AOKP logo with [ROM][4.3.1]*10/24 update* AOKP for SGH-I717 [The Family/AllianceROM]
Any help?
ursusca said:
Hi,
My phone boots to TWRP recovery only. I can boot into TWRP recovery, flush any ROM and set it up but after reboot my phone is not coming up.
It boots to the Samsung logo with BLACKSTAR BLACKJELLY ROM or to the AOKP logo with [ROM][4.3.1]*10/24 update* AOKP for SGH-I717 [The Family/AllianceROM]
Any help?
Click to expand...
Click to collapse
I got similar problem with beanstalk 4.3.
CWM and TWRP were tried to make backups, and every time of rebooting need a fully wipe and restore.
Even when a rom failed to boot, backup, factory reset and restore will make it bootable once.
Any idea?
---------- Post added at 05:03 PM ---------- Previous post was at 04:28 PM ----------
Not knowing the reason, but I tried to the oldest TWRP I can found (2.2) and it worked well.
First restore with 2.6 then flash 2.2, and after another cycle of backup and restoring, without booting up yet, boot up at last and it works seamlessly with rebooting. Don't know if I can flash back to 2.6 but no need to bother again. 2.2 is just as good, for me.
Hope it help.
hotgly said:
I got similar problem with beanstalk 4.3.
CWM and TWRP were tried to make backups, and every time of rebooting need a fully wipe and restore.
Even when a rom failed to boot, backup, factory reset and restore will make it bootable once.
Any idea?
---------- Post added at 05:03 PM ---------- Previous post was at 04:28 PM ----------
Not knowing the reason, but I tried to the oldest TWRP I can found (2.2) and it worked well.
First restore with 2.6 then flash 2.2, and after another cycle of backup and restoring, without booting up yet, boot up at last and it works seamlessly with rebooting. Don't know if I can flash back to 2.6 but no need to bother again. 2.2 is just as good, for me.
Hope it help.
Click to expand...
Click to collapse
Thank You, Man!!! It helped I've just downloaded the 2.2 viersion from here http://goo.im/devs/OpenRecovery/sgh-i717, flashed it and reinstalled BLACKSTAR
Thank you!! I have been having this same issue, and couldn't figure it out for the past few days. AT&T Samsung SGH-i717.
I started with TWRP 2.6.3.0 and using ROM BeanStalk-4.3.1009-20131015-quincyatt.zip (from thread [Rom][JellyBean][4.2/4.3][4.4 Apha Preview][PAC kernel]).
I used ODIN3.07 to get TWRP 2.6.3.0 set up, then did backups, wiped, and installed 4.3. It would run FLAWLESSLY, until it was powered down, or rebooted, at which point I would get the initial Samsung pop, then black screen. This was happening with 4.3 as well as the backup from stock 4.1.2 (I think).
TWRP files:
http://goo.im/devs/OpenRecovery/sgh-i717
Started with:
openrecovery-twrp-2.6.3.0-quincyatt.img.tar
Downgraded to:
openrecovery-twrp-2.2-sgh-i717-signed.zip
In case anyone is confused, as I was initially..... here is what I did to get it to work....
1. From TWRP 2.6.3.0, wipe & restore backup of 4.3, then shut down.
2. Boot to TWRP, install openrecovery-twrp-2.2-sgh-i717-signed.zip from within TWP, shut down again.
3. Boot to TWRP again, should be at 2.2 now, do a backup of current install.
4. DO NOT REBOOT OR POWER DOWN
5. Restore the back up you JUST MADE
6. Reboot
So far so good, over a dozen test reboots and power offs, no issues yet.
3 new members, helping each other, help themselves.
this is great, some folks who are not afraid to read and the confidence to experiment.
good job to all 3 of you and an official thanks to each by using the thanks button at the bottom left of each post of that person
welcome to all
ursusca said:
Hi,
My phone boots to TWRP recovery only. I can boot into TWRP recovery, flush any ROM and set it up but after reboot my phone is not coming up.
It boots to the Samsung logo with BLACKSTAR BLACKJELLY ROM or to the AOKP logo with [ROM][4.3.1]*10/24 update* AOKP for SGH-I717 [The Family/AllianceROM]
Any help?
Click to expand...
Click to collapse
okay so this is a very old post but i guess i found a working solution for this!
i have Galaxy A7 (SM-A700FD) 5.0.2
in basic terms:
-u need to remove TWRP recovery from your phone totally.
-i Flashed stock android recovery (well i got it by experimenting, as i rooted my phone again by ODIN it replaced the TWRP recovery with android recovery(turn off Auto-Reboot))
-you will be stuck in boot loop mode (stuck with the logo- good news is you are out of TWRP recovery boot loop)
-you have to get to boot loader anyhow (either by adb commands or vol down, home, Power key pressed all together)
-Flash TWRP recovery again using ODIN (turn of Auto-Reboot)
-hold the power key which will try to restart the phone.
-still it is boot loop mode.
-enter Boot loader (pressing Power key, Volume down, home- all three keys together or by adb commands)
-enter TWRP recovery (pressing Power key, Volume up, Home key- all three keys together or by adb commands)
-Restore your backup
-and you are good to go
hotgly said:
I got similar problem with beanstalk 4.3.
CWM and TWRP were tried to make backups, and every time of rebooting need a fully wipe and restore.
Even when a rom failed to boot, backup, factory reset and restore will make it bootable once.
Any idea?
---------- Post added at 05:03 PM ---------- Previous post was at 04:28 PM ----------
Not knowing the reason, but I tried to the oldest TWRP I can found (2.2) and it worked well.
First restore with 2.6 then flash 2.2, and after another cycle of backup and restoring, without booting up yet, boot up at last and it works seamlessly with rebooting. Don't know if I can flash back to 2.6 but no need to bother again. 2.2 is just as good, for me.
Hope it help.
Click to expand...
Click to collapse
Thank you very much for this tip! :laugh: Simply went to the official twrp .me site, chose the first img, and flashed it in the way described there. Phone booted fully now.
Tried flashing SR KK Rom.. Was on AOKP 4.4.4 but was super buggy.
Flashed without issue, but stuck in red verizon bootup screen. I skipped flashing via ODIN the 4.3 firmware. I resorted back to stored TWRP backup, all good and usable.
To try and fix, i changed from TWRP to Philz per recommendation int he thread. Then reflashed. No go still. Tried to go back to TWRP backup, but Philz doesnt like it, and now i cant get to my phone via USB to reinstall TWRP.
I have AOKP still on my phnoe, so tried to reflash, but no dice.
I'm stuck with an unusable phone, and it looks like NO way to fix it.
I can access phone and flash via ODIN. But, i can not see phone via USB (in order to copy over ZIPs). I can mount my external SD, but then when i unmount, data goes away.
So screwed - need help so bad.
Rom that started it all:
http://forum.xda-developers.com/showthread.php?t=2582313
Okay, used ADB push to get TWRP to the phone. That worked... Restored backup, but because of flashing the 4.3 firmware, lost root per TWRP
However, when i boot now, it just sits at "Samsung Galaxy Note II" screen. Doesnt go any further. EFf me.
EDIT: I see why.. backup restore failed. arghhhhhhhhhhhh
I cant flash anything. Everything fails.
Bump
Stop trying to restore backups and wipe everything in twrp and then flash a clean a rom of your choice.
---------- Post added at 09:20 PM ---------- Previous post was at 09:18 PM ----------
DatacomGuy said:
Bump
Click to expand...
Click to collapse
No need to bump your thread. We have small, but talented group of ppl that can help you but bumping because of no response instantly isn't good taste.
I've just unlocked the bootload and flashed TWRP on to my moto G4 plus and went to flash magisk after to get root. After i flashed it I rebooted my phone but it wouldn't boot into the system and wouldn't even show the boot animation. I tried to use the Stock recovery I made after putting TWRP on my phone but it kept on saying error 255. This lead me to sideload lineage OS onto the phone which work. However when I tried to boot into android it did the same thing again. I have a feeling that something is wrong with the /boot partition as when i go to recover using my stock img there is only a system box.
Any help is appreciated
Welcome to XDA,
and did you try reflashing stock firmware?
That will always work.
Hello there. I'm having a major issue with flashing magisk right now. So all was fine. Then today, I flashed OxygenOS open beta 19 on my OnePlus 5T. I then tried flashing Magisk. What's really weird is it boots, but as soon as it does, I get a split second of enter pin, before my phone just says shutting down before it does just that. I've tried the uninstaller then reinstalling it with no luck. I'd really like to stay rooted without wiping data, but I can live without root. Does anyone know how I could fix this problem? Thanks so much in advance.
---------- Post added at 09:12 PM ---------- Previous post was at 09:10 PM ----------
Oh very sorry, I mean open beta 29.