Related
Not long after I enabled the power saving mode on my S2 the device suddenly shutdown (while in my pocket, battery around 60% full) and couldn't turn on again. After 2 days the S2 suddenly booted again but still won't start up all the time when I want to.
My S2 device never had this issue before (I know it is a well known issue but apparently it should have been fixed in JB?)
Software I use:
- Apolo 4.12 kernel (Regular)
- Neatrom Lite
I am thinking of either hardware starting to fail or maybe the Apolo kernel has a bug that was triggered by enabling the powersafe mode?
I am not sure, anyone that can help/advise me?
It's probably a software issue, JB has tons of bugs. What kinda advise do you want? You need to re-install the rom (and clear cache ofc) and if that doesn't work re-install the stock rom via odin and then install neatrom if you want. And just don't use power save mode until you get an update? It's useless anyway... You can also try another kernel, this seems like a kernel problem.
Power saving actually just have a few advantages like turning of un-needed things like haptic feedback and some other stuff which you could do manually, and the main power saving feature is that it limits the CPU to use only 800Mhz max, this might be having some issues with Apollo kernel (as it works fine with stock or stock based kernel like Philz), but Apollo is a powerful kernel and will let you manually adjust the CPU limits even at your preferred limits manually, so if you want to save battery just manually adjust the settings instead of using Power Saving mode.
Sent from my GT-I9100 using Tapatalk
Perphide said:
Not long after I enabled the power saving mode on my S2 the device suddenly shutdown (while in my pocket, battery around 60% full) and couldn't turn on again. After 2 days the S2 suddenly booted again but still won't start up all the time when I want to.
My S2 device never had this issue before (I know it is a well known issue but apparently it should have been fixed in JB?)
Software I use:
- Apolo 4.12 kernel (Regular)
- Neatrom Lite
I am thinking of either hardware starting to fail or maybe the Apolo kernel has a bug that was triggered by enabling the powersafe mode?
I am not sure, anyone that can help/advise me?
Click to expand...
Click to collapse
It may be a bug in that rom. try another rom
Thank you!
Thank all of you for the help and advise!
I will no longer use the powersafe feature and start using the Apolo kernel again, since that kernel gave me the best battery life.
It might have been a coincidence of course that my S2 died/didn't want to start up no more shortly after using the powersafe feature... however from all of the above advise it seems that I don't need that feature anyway so I feel safe to switch back to the Apolo kernel again with my new installed NeatROM SuperLite 2.4.
If the problem returns I'll be here to post it, it might still be a bug in the Apolo kernel of the NeatROM ... I am not sure. Time will tell, or not if it had to do with the powersafe feature which I won't be using any more.
Thank you all!
Hey everyone. redoing my thread now that we have tried alot of solutions, hopefully someone has a vague idea of what we can do to my phone lol.
So then, my phone (redmi note 3 snapdragon) refuses to go into deep sleep no matter what combination I've tried.
Tried Combos
1. RR+ radon and agni
2. Miui 8 stable and dev preview (7.1.5 and 8.1.1.0)+ stock, radon, and neon kernel (flashing using miflash with unlocked bootloader official)
3. Cm13 latest nightly+ radon, stock, and agni
4. Nitrogen os+ nagato kernel (current rom)
All combinations we're tried with clean installs (factory data, system,cache and internal storage)
Hardware methods tried
1. Physically disconnecting fingerprint sensor (goodix)
now then, with wakelock detector, we can see im troubled with a 99% awake time, along with 100,00's of event wakelocks over 6hours, now event wakelocks deal with the actual hardware of the phone from what i've seen, which makes little sense to me because the screenshot i am attaching was just over an entire night of not touching the phone. so why it has any activity is bizarre to me. so heres what we have tried so far on my previous thread.
Tried methods of fixing event wakelocks
1. Greenify, force doze, wakelock blocker and blocking everything in frustration. deep sleep battery saver.
2. physically deleting events one by one (going into dev/input/eventx (x being wakelocks 1-10) after deleting some my display eventually stopped working, most likely because i just deleted the event that controls the lcd i assume. rebooting fixed the problem and remade the events in their directory so no harm done.
3. removing zram usage figuring it was a thrashing problem (saw a thread in the hd desire of the same issue. didnt help sadly.
4. flashing modem in radon thread, ended up making my phones earpiece not work for calls and still had the wakelocks.
5. disabling gps, along with auto brightness and auto rotate
so then if anyone needs any other information just let me know, currently using an iPhone for the time being so im desperate lol. but still id rather fix and find the problem then go for returning the phone. better to solve a problem for future people in my shoes then just thrust it away is how i see it. also someone bug the strix and darkstrix about this maybe they know the solution. anyway thanks for reading and i hope we can fix my phone soon
^Update^ now using epic rom 7.1.12 from the xda thread, still got wakelocks on stock without any other apps.
I have same problem in all versions of stock MIUI Rom. I too tried all sorts of combination but the problem remains. Finally I'm using RR Rom 5.7.4 (20161113 build) + radon Kernel. My deep sleep problem have been solved (though not 100%). Now my phone looses very little battery in standby time like 1-2% over a night. Before RR Rom I tried many custom Rom but had same problem. If you have not tried the ROM (RR Remix 20161113) I've mentioned above give it a try. Best Of Luck.
Thanks rj I'll install and post logs after work. Fingers crossed that it fixes my problem.
use the rom android 6.0.1 with module powernap , u can fix it !!
http://repo.xposed.info/module/net.jzhang.powernap
Small update: testing stamina mod currently with xposed. ressurection remix will be next only because xposed seemed a bit easier lol
Well damn :/ tried RR rom and still nothing sadly, also powernap with RR didn't do anything as well. both were tried with radon and agni kernels
Then once try nexus rom i am getting good battery life in this rom too.
rjrulz007 said:
Then once try nexus rom i am getting good battery life in this rom too.
Click to expand...
Click to collapse
surer rj which one?
Having same problem.. Battery is draining very fast in idle mode.. Deep sleep is not working in any rom.. Something is keeping cpu awake.... If u find any solution then plz let me know bro.. Thanks
That happens to me when background data enabled . when i disable backround data through data usage settings , the battery backup gets better, but sure my social apps wont sync.
It seems the wakelock come from android system itself , go check logcat and you will get messages like "ANDR_PERF_RESOURCES FAILED TO APPLY PERFORMANCE" , the likes of "decided to move IRQ from cpu0 to cpu1" , and the likes of "FPC listener : waiting..." , thats all that i notice and thats happening every single milisecond on every MM roms i have tried so far....
Well when i used miui 7 LL global didnt get that much messages on logcat , but its LL ...
I guess the problem is related to source code , i dont know .
Did you try to disable fingerprint also? In many previous ROM this solved the issue.
D4xel said:
Did you try to disable fingerprint also? In many previous ROM this solved the issue.
Click to expand...
Click to collapse
yes sir still nothing
rohit4kk said:
Having same problem.. Battery is draining very fast in idle mode.. Deep sleep is not working in any rom.. Something is keeping cpu awake.... If u find any solution then plz let me know bro.. Thanks
Click to expand...
Click to collapse
hey dont worry man you'll be the first when we find an answer lol
Zaccary said:
Well damn :/ tried RR rom and still nothing sadly, also powernap with RR didn't do anything as well. both were tried with radon and agni kernels
Click to expand...
Click to collapse
Poor network signal also can cause this issue. My old carrier had crappy signal, once I switched, it increased my phone's battery since the new network has much better signal.
deltatux said:
Poor network signal also can cause this issue. My old carrier had crappy signal, once I switched, it increased my phone's battery since the new network has much better signal.
Click to expand...
Click to collapse
thanks for the tip but we are running on airplane mode only at this point just to make sure we don't have more things to worry about battery drain. i appreciate the information though ^_^
Mine kenzo, tried all miui version, always the same.
sbor-si said:
Mine kenzo, tried all miui version, always the same.
Click to expand...
Click to collapse
I'm not alone!!!
Hey hopefully we find an answer buddy
Yesterday I want to flash 7.3.2.0 xiaomi.eu version (clean install via twrp), but get bootloop. Than I flashed official global developer version (7.1.19) (fastboot via miflash, flash all), nothing better, except android system used 6%, android 39% and dex2oat 20%.
Can somebody try 7.3.2.0 version, from earlier posts is visible, that this version rocks, all later versions have issues.
sbor-si said:
Yesterday I want to flash 7.3.2.0 xiaomi.eu version (clean install via twrp), but get bootloop. Than I flashed official global developer version (7.1.19) (fastboot via miflash, flash all), nothing better, except android system used 6%, android 39% and dex2oat 20%.
Can somebody try 7.3.2.0 version, from earlier posts is visible, that this version rocks, all later versions have issues.
Click to expand...
Click to collapse
i believe last time i tried 7.3.2.0 it gave me constant reboots and lagged quite a bit. but i also heard it was the best for battery so i can try flashing through miflash again after work. im also going to be trying this rom here https://forum.xda-developers.com/re...nzo-lldlm18-1-3m866beta-real-factory-t3375250. since it uses edl mode instead of fastboot so hey maybe that will knock something lose?
Well, right now I'm trying to get it working - without luck. I can flash 7.3.2. with miflash via edl without troubles, phone started normaly, all seems good, until "No service" for gsm signal. Bad luck. I think that modem version from that old flash is not compatible with hardware.
But it looks so good - Android takes 20% and Android system 6%...
Hey, what's up mates
So, I've finally been able to root my Moto G4 Plus XT1640, running the factory rom (Android Nougat 7.0) with twrp, busybox and supersu, and got Viper4Android back :victory: - I've never used it on this device before, I've only had success when I was using it on a Samsung Galaxy 4 Mini (I think), back on 2015.
But I wasn't able to make it work properly. I tried the official XDA thread step-by-step, tried some slight different things I've saw on other forums while researching about, and I've even tried following this one: https://forum.xda-developers.com/note-4/themes-apps/how-to-viper4android-install-proper-t3691597...
Even after installing the Policy mentioned on that thread, I can only make Viper4Android works with Spotify on Compatible Mode, and even then it doesn't work with my Local Synced Files - which is a great concern to me.
I tried turning out Selinux on Developer Mode V4A' settings - and this is was the first time it worked, it was then I realized I needed a Selinux Changer, so I got Sel. Switch, and now I'm staying with Sel. Mode Change.
Even after installing the Policy from that thread I've mentioned, I gotta change Sel. to Permissive to get V4A working ("Enabled: Yes" and "Processing: No" on Driver Status), and then change V4A to Compatible. Of course I'd like to use it on normal mode (so there'd be no delay on every intro), but I don't mind at all using Compatible, as long it works with Local Synced Files on Spotify too...
Does anyone know anything about how to get it?
Anyone...? Please? Any ideas are welcome
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community
Requirements:
- oreo bootloader
- twrp 3.2.0+
- backup everything before install
- wipe data before upgrading from LineageOS 14.1 or stock rom
Install:
- Flash zip in TWRP
- Don't forget about gapps (arm64 8.1)
- Root not included. Flash magisk before first start.
Google apps should be installed via recovery immediately after installing ROM.
If you reboot into ROM before installing Google apps, you must factory reset and then install them, otherwise expect crashes.
Not working:
gps
bt audio
stuff, I haven't checked
I broke my tablet. There are no more updates here further.
Download:
T820: https://drive.google.com/open?id=1ql4VIjTsSHNwzsoJm3Yb8wt0RW9OJerE
Device initial config sources:
https://github.com/bonuzzz
I was about to sell tablet...and get pixil c. Tablet is extremely laggy on stock Oreo. Switched back to your lineage 14.1 build which runs well but realized it was no longer supported. Very happy with your work! Thanks!
I'll give it a go when I get home. Thanks for supporting our device!
I did switch off WiFi upon initial setup, didn't seem to be liking 5g. After setup I switched to 5g WiFi but it kept showing no internet. My other devices don't have this problem. Not a big deal, just giving a heads up. I switched to 2g WiFi and all is well. Wayyyy smoother than stock Oreo. Didn't test gps, I know you said it wasn't working. I don't use GPS on my tablet so no loss there. Thanks again!
For gapps it shows "arm 8.1" it should be "arm64 8.1"
Edit: 5g seems to be working fine after a resetting WiFi, mobile & Bluetooth. Still can't seem to get audio playing through Bluetooth even though it's connected.
Cool! I will be installing this shortly. I was going to switch the the tweaked stock Oreo but will much rather use Lineage since I prefer more of a "vanilla Android" over Samsung's version.
P.S. I recently got myself a pixelbook for chromeos+android+linux and I find myself using that way more than my tab s3. If you need anyone to test something that doesn't really care about stability, let me know!
Edit:
Just wanted to let people know of what I've initially noticed and tested.
* Not laggy like stock is
* Able to format sd card for internal storage
* Official Keyboard case works (didn't use much before)
- show/hide key for virtual keyboard and Lang key don't do anything (at least it appears that way)
- Left 'alt' brings up emoji, right 'alt' brings up symbols on virtual keyboard.
* Auto wake/sleep works with 3rd party case (assume all work since it's just a magnet)
* Auto brightness works but I tested it with a flash light.
I liked the 14.1 version and I seem to like this version as well. It is to early to say more, but why can't you share this with lineage? It would be a dream, if this would be official and we would recieve updates. And maybe they will help you with the missing GPS?
Thanks so much for this. I've been wanting to get an Oreo ROM like this for my S3
EDIT: Is there any chance you could just give a dump of your terminal session of the build? I had started to try & build 15.1 for the S3 WiFi, based on your work for the LTE version, but wasn't having any luck. I'm hoping that if you could provide a terminal dump, it could help me work through my issues to get the build working as well. Would appreciate it =]
Regardless, thanks for taking the time to build this for us WiFi owners! =D
Finally, T820! Have been waiting for this for months now. Gonna give this ROM a try ASAP :laugh:
Thank you so much for this! Testing this weekend.
PuDLeZ said:
Just wanted to let people know of what I've initially noticed and tested.
* Not laggy like stock is
* Able to format sd card for internal storage
* Official Keyboard case works (didn't use much before)
- show/hide key for virtual keyboard and Lang key don't do anything (at least it appears that way)
- Left 'alt' brings up emoji, right 'alt' brings up symbols on virtual keyboard.
* Auto wake/sleep works with 3rd party case (assume all work since it's just a magnet)
* Auto brightness works but I tested it with a flash light.
Click to expand...
Click to collapse
Did you test the spen by any chance?
VVombat said:
Thank you so much for this! Testing this weekend.
Did you test the spen by any chance?
Click to expand...
Click to collapse
I didn't have software installed that I could use it in but I did put it to the home screen and got the circle indicator of where the tip is so it registers. Of course, there was no Samsung menu... Anything specific you want me to try this evening?
PuDLeZ said:
I didn't have software installed that I could use it in but I did put it to the home screen and got the circle indicator of where the tip is so it registers. Of course, there was no Samsung menu... Anything specific you want me to try this evening?
Click to expand...
Click to collapse
Mhm I'm using mainly Squid and Xodo to annotate and notate stuff. If you have them laying around anyways that would be nice, but if not no need to install and waste your time if I'll install tomorrow anyways. Thank you for your answer!
lineage-15.1-20180614-UNOFFICIAL-gts3lwifi doesn't work for me, bootloops, tried almost everything, etc.
RESOLVED: See below how and why.
Good afternoon. Everything works fine, the stylus in all orientations, the AnTuTu test runs fine and there is no understating of indicators on both stock, Wi-Fi is excellent, both 2.4 GHz and 5 GHz.
There are only 2 inconveniences
- Stereo sound from speakers is only in portrait orientation, and landscape channels do not change. Can you make a patch or fix yourself, you can not even change the channels when you turn, but only make a stereo Sound in landscape orientation (videos and movies often look into it);
- No sound goes to the Bluetooth headphones.
In any case, the firmware is super, thank you very much for the work done.
Hello, how to get Bluetooth working? I connect but no sound
Thank you also
Another problem, the sound slows down and stutters in applications (heavy or simple games)
JWnSC said:
For gapps it shows "arm 8.1" it should be "arm64 8.1"
Edit: 5g seems to be working fine after a resetting WiFi, mobile & Bluetooth. Still can't seem to get audio playing through Bluetooth even though it's connected.
Click to expand...
Click to collapse
edited, thanks
yes, bt audio doesn't work. seems I broke it in last moment...
PuDLeZ said:
Just wanted to let people know of what I've initially noticed and tested.
* Not laggy like stock is
* Able to format sd card for internal storage
* Official Keyboard case works (didn't use much before)
- show/hide key for virtual keyboard and Lang key don't do anything (at least it appears that way)
- Left 'alt' brings up emoji, right 'alt' brings up symbols on virtual keyboard.
* Auto wake/sleep works with 3rd party case (assume all work since it's just a magnet)
* Auto brightness works but I tested it with a flash light.
Click to expand...
Click to collapse
I have official keyboard case too. Unfortunately it's almost unusable in aosp if you need more than one keylayout. What about special keys, aosp doesn't have that triggers what stock rom has. I only could advice 3rd party app, but paid https://forum.xda-developers.com/showthread.php?t=1541916
HardWorker79 said:
I liked the 14.1 version and I seem to like this version as well. It is to early to say more, but why can't you share this with lineage? It would be a dream, if this would be official and we would recieve updates. And maybe they will help you with the missing GPS?
Click to expand...
Click to collapse
Nothing will change with official status except It would create more troubles and bureaucracy there.
Nobody will help. Believe me.
Comses said:
Good afternoon. Everything works fine, the stylus in all orientations, the AnTuTu test runs fine and there is no understating of indicators on both stock, Wi-Fi is excellent, both 2.4 GHz and 5 GHz.
There are only 2 inconveniences
- Stereo sound from speakers is only in portrait orientation, and landscape channels do not change. Can you make a patch or fix yourself, you can not even change the channels when you turn, but only make a stereo Sound in landscape orientation (videos and movies often look into it);
- No sound goes to the Bluetooth headphones.
In any case, the firmware is super, thank you very much for the work done.
Click to expand...
Click to collapse
I have an issue somewhere in audio behavior. Will check it deeper.
Comses said:
Another problem, the sound slows down and stutters in applications (heavy or simple games)
Click to expand...
Click to collapse
in games only? I've not noticed anything in videos.
samsuffit said:
Doesn't work for me.
What I did from Lineage 14.1:
- Upgraded TWRP to v3.2.1.1
- Wiped eveything
- Downloaded BRE2 firmware for my country
- Extracted BL....tar.md5 and flashed it with Odin v3.13.1
- Rebooted in recovery mode to be sure of... still don't know what
- Flashed Lineage 15.1
Then I could see the logo animation until the end, just before the system starts, then 3 boot loops and it went to recovery mode
I repeated the exact same sequence and flashed SuperSU v2.82-SR5, same result.
So...:
- Wipe everything
- Flash BL, CSC and CSC_HOME (no need of AP, system partition) with Odin
- Format/Erase Data
- Flash Lineage 15.1
Again a boot loop, this time without going back automaticaly to recovery mode.
Tried with SuperSU, boot loop...
So... This time I flashed eveything, reboot with Samsung Android, test a little bit, then:
- Flash TWRP v3.2.1.1
- Immediatly reboot to recovery mode
- Format/Erase Data
- Wipe everything
- Flash Lineage 15.1
Boot loop...
Tried with SuperSU, boot loop...
I was able to restore a full backup of my previous Lineage 14.1 installation.
What did I do wrong and which kind of logs do you need to help me to understand?
Thank you and thank you to have integrated S-Pen support, I love this thing. I don't realy need GPS.
Edit: in case it was mandatory I tried with Magisk v16.0 and v16.4 instead of SuperSU. Same boot loop.
If it's because I didn't flash the GAPPS, well... nevermind... I'll wait for something else.
Click to expand...
Click to collapse
Magisk is needed for device certification in Play store. That's because it should be flashed with gapps before first boot. So, rom works without gapps and root well.
For what region you downloaded oreo stock rom? I doubt but maybe samsung has different logic in bootloader for relocatable kernel stuff. It's strange how you restored lineage nougat, because that kernel shouldn't work with oreo bootloader.
edit: i'm wrong about bootloader and nougat, because I use now old twrp with nougat kernel.
Flashed old build. Have audio in bt, but don't have speaker rotation. I was sure it worked before...
If someone used or uses lineageos 14.1, is speaker rotation work there or not?
Hello @bonuzzz, thank you for the reply.
I was able to restore my Lineage 14.1 because I flashed the ARA2 boot loader (tried with Odin the first time, then with my TWRP backup, same result)
bonuzzz said:
If someone used or uses lineageos 14.1, is speaker rotation work there or not?
Click to expand...
Click to collapse
Only with VLC. Stuck in portrait mode with stock player. I don't have any games...
The last thing I need to try is installing the GAPPS... Like I said, I don't want to, so if the problem comes from this, I'll pass. But I have to try to be sure...
In this order from TWRP:
- Flash BRE2 boot loader
- Format Data and wipe everything
- Flash Lineage 15.1
- Flash openGAPPS nano arm64 8.1
- Flash Magisk 16.4
And... It's working...
Well...
I want to cry...
So the GAPPS are mandatory.
Thank you for creating a new os for sm-t820.
BT audio is working for me with Sony mdr zx220bt headphones
Who are we?
YAAP is a project founded by Adhitya Mohan (@poad42) and Ido Ben-Hur (@idoybh) with the goal of staying close to AOSP in design goals, offer a clean interface, do as much as original development as possible and avoid becoming a kitchen sink and cherry picked mess.
Bug reporting:
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab dmesg . (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Kernel Source
ROM Source
Download ROM
Recovery
Flashing Procedure:Have OOS11 flashed on both slots
1. Flash Recovery with "fastboot flash boot boot_yaap.img"
2. Boot recovery, format data
3. Sideload rom with "adb sideload <rom-name>.zip" [*Gapps are included*]
4. Reboot to System
5. Rejoice
To update the rom:
With inbuilt updater app, select new rom zip from storage, flash.
OR
reboot to recovery, sideload rom zip, switch slot, reboot.
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest OOS 11.x.x
Based On: AOSP
Version Information
Status: Stable
Created 2021-05-27
Last Updated 2021-05-29
Working:
Camera/Video/Mic
Fingerprint
Dash Charging/USB stuff
DRM(Netflix,prime video playback)
IMS (VoWIFI/VoLTE)
RIL
Video playback
Wi-Fi
Alert slider, Panel modes, HBM stuff
Permissive kernel
SafetyNet
Encryption
Note: The ROM includes gapps with some pixel additions.
Reserved
Finally yaap for op7...
I will take this rom under consideration..as i always like trying new roms on my devic
Update: 29May21:
Notch mask on landscape
FOD now hides when keyboard is opened at lockscreen
Used OP7 build FP and release keys to make Yono app work
Rom link has been updated**
This is the first custom rom (and I tried almost every rom on the OP7 forum) that has NO PROBLEM with 5ghz wifi and, above all, "ok google" working with SCREEN OFF... I don't know how you managed to do it but awesome, very good work!!
I misread the installing instruction and installed it in another way... I flashed it using the orangefox recovery that I found at this link:
[RECOVERY][DUALBOOT][Unified][A10][A11][OOS11]Orangefox-DualBoot-Unified-Reborn[21-03-2021]
Is it possible to get this recovery as an image file which can be used with 'fastboot boot recovery.img'? The reason I am asking is because the official magisk doesn't work if a recovery is installed and I prefer to use the official magisk then...
forum.xda-developers.com
I don't know if it's fault of this installing method or magisk's fault, but I don't pass safetynet and so google pay doesn't work -- no big deal for me anyway
Also, there's a couple of bugs, for example on the AOD the fingerprint icon partially overlaps with the battery percentage; and I cannot find a way to hide the "pill" (I mean the little white bar at the bottom of the screen) -- in fact if in YASP settings -> navigation bar I uncheck "enable navigation bar", the pill disappear but the back gesture doesn't work anymore (while the Home and Multitasking gestures still work)
Overall is a very good rom!! The battery also seems pretty good even if I'm using it for only a few hours
uhero2 said:
This is the first custom rom (and I tried almost every rom on the OP7 forum) that has NO PROBLEM with 5ghz wifi and, above all, "ok google" working with SCREEN OFF... I don't know how you managed to do it but awesome, very good work!!
I misread the installing instruction and installed it in another way... I flashed it using the orangefox recovery that I found at this link:
[RECOVERY][DUALBOOT][Unified][A10][A11][OOS11]Orangefox-DualBoot-Unified-Reborn[21-03-2021]
Is it possible to get this recovery as an image file which can be used with 'fastboot boot recovery.img'? The reason I am asking is because the official magisk doesn't work if a recovery is installed and I prefer to use the official magisk then...
forum.xda-developers.com
I don't know if it's fault of this installing method or magisk's fault, but I don't pass safetynet and so google pay doesn't work -- no big deal for me anyway
Also, there's a couple of bugs, for example on the AOD the fingerprint icon partially overlaps with the battery percentage; and I cannot find a way to hide the "pill" (I mean the little white bar at the bottom of the screen) -- in fact if in YASP settings -> navigation bar I uncheck "enable navigation bar", the pill disappear but the back gesture doesn't work anymore (while the Home and Multitasking gestures still work)
Overall is a very good rom!! The battery also seems pretty good even if I'm using it for only a few hours
Click to expand...
Click to collapse
regarding safety net, it'll only fail if magisk is flashed, n magisk hide isn't enabled. Without magisk it should pass safetynet by default.
google hotword detection, the credit goes to yaap team.
I'll check that charge string on aod
There's no option to hide nav bar. You should probably ask yaap team for it
escapee_skp said:
regarding safety net, it'll only fail if magisk is flashed, n magisk hide isn't enabled. Without magisk it should pass safetynet by default.
google hotword detection, the credit goes to yaap team.
I'll check that charge string on aod
There's no option to hide nav bar. You should probably ask yaap team for it
Click to expand...
Click to collapse
Yes, I don't know why but magiskhide was disabled by default, now I have enabled it and safetynet correctly passes, so google pay now works!! Thank you. I also tested the battery and I can confirm is better than OOS and than every other custom rom I tried.
But I have serious issues with calls... I use the google phone app. Whenever I receive a call I cannot use the volume buttons to adjust volume; swithing between ear speaker and handsfree doesn't work; the proximity sensor doesn't work and if I turn off the screen manually with the power button, if I turn it on again the UI become buggy, often the screen stays black and sometime the phone shuts down by itself and goes to "qualcomm crash dump"... Can you please try if the calls are working correctly for you? Before blaming the rom I would like to ensure that isn't an app I have installed causing these issues
uhero2 said:
Yes, I don't know why but magiskhide was disabled by default, now I have enabled it and safetynet correctly passes, so google pay now works!! Thank you. I also tested the battery and I can confirm is better than OOS and than every other custom rom I tried.
But I have serious issues with calls... I use the google phone app. Whenever I receive a call I cannot use the volume buttons to adjust volume; swithing between ear speaker and handsfree doesn't work; the proximity sensor doesn't work and if I turn off the screen manually with the power button, if I turn it on again the UI become buggy, often the screen stays black and sometime the phone shuts down by itself and goes to "qualcomm crash dump"... Can you please try if the calls are working correctly for you? Before blaming the rom I would like to ensure that isn't an app I have installed causing these issues
Click to expand...
Click to collapse
no issues here, perhaps install with the given procedure and let me kow then
after tht take logs
Excellent ROM, only issue I really have is that android 11 will no longer let me insecurely connect to the enterpise WIFI network at work. That is an issue for the IT guys at work....
escapee_skp said:
no issues here, perhaps install with the given procedure and let me kow then
after tht take logs
Click to expand...
Click to collapse
Nevermind, it was fault of a call recording app "skyvalex", it has a magisk module also. Now i uninstalled it and have no problem with calls
Great ROM, thanks dev.
Only concerns are widevine l1 not present and occasional heating of device.
Why is this thread closed?
Hi guys, can we expect any yaap support for guacamoleb ? It sounds so promising ! Best regards
Sjak Philipsen said:
Why is this thread closed?
Click to expand...
Click to collapse
yaap official team will post yaap updates for our device
escapee_skp said:
yaap official team will post yaap updates for our device
Click to expand...
Click to collapse
That's Great !!