I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community
Requirements:
- oreo bootloader
- twrp 3.2.0+
- backup everything before install
- wipe data before upgrading from LineageOS 14.1 or stock rom
Install:
- Flash zip in TWRP
- Don't forget about gapps (arm64 8.1)
- Root not included. Flash magisk before first start.
Google apps should be installed via recovery immediately after installing ROM.
If you reboot into ROM before installing Google apps, you must factory reset and then install them, otherwise expect crashes.
Not working:
gps
bt audio
stuff, I haven't checked
I broke my tablet. There are no more updates here further.
Download:
T820: https://drive.google.com/open?id=1ql4VIjTsSHNwzsoJm3Yb8wt0RW9OJerE
Device initial config sources:
https://github.com/bonuzzz
I was about to sell tablet...and get pixil c. Tablet is extremely laggy on stock Oreo. Switched back to your lineage 14.1 build which runs well but realized it was no longer supported. Very happy with your work! Thanks!
I'll give it a go when I get home. Thanks for supporting our device!
I did switch off WiFi upon initial setup, didn't seem to be liking 5g. After setup I switched to 5g WiFi but it kept showing no internet. My other devices don't have this problem. Not a big deal, just giving a heads up. I switched to 2g WiFi and all is well. Wayyyy smoother than stock Oreo. Didn't test gps, I know you said it wasn't working. I don't use GPS on my tablet so no loss there. Thanks again!
For gapps it shows "arm 8.1" it should be "arm64 8.1"
Edit: 5g seems to be working fine after a resetting WiFi, mobile & Bluetooth. Still can't seem to get audio playing through Bluetooth even though it's connected.
Cool! I will be installing this shortly. I was going to switch the the tweaked stock Oreo but will much rather use Lineage since I prefer more of a "vanilla Android" over Samsung's version.
P.S. I recently got myself a pixelbook for chromeos+android+linux and I find myself using that way more than my tab s3. If you need anyone to test something that doesn't really care about stability, let me know!
Edit:
Just wanted to let people know of what I've initially noticed and tested.
* Not laggy like stock is
* Able to format sd card for internal storage
* Official Keyboard case works (didn't use much before)
- show/hide key for virtual keyboard and Lang key don't do anything (at least it appears that way)
- Left 'alt' brings up emoji, right 'alt' brings up symbols on virtual keyboard.
* Auto wake/sleep works with 3rd party case (assume all work since it's just a magnet)
* Auto brightness works but I tested it with a flash light.
I liked the 14.1 version and I seem to like this version as well. It is to early to say more, but why can't you share this with lineage? It would be a dream, if this would be official and we would recieve updates. And maybe they will help you with the missing GPS?
Thanks so much for this. I've been wanting to get an Oreo ROM like this for my S3
EDIT: Is there any chance you could just give a dump of your terminal session of the build? I had started to try & build 15.1 for the S3 WiFi, based on your work for the LTE version, but wasn't having any luck. I'm hoping that if you could provide a terminal dump, it could help me work through my issues to get the build working as well. Would appreciate it =]
Regardless, thanks for taking the time to build this for us WiFi owners! =D
Finally, T820! Have been waiting for this for months now. Gonna give this ROM a try ASAP :laugh:
Thank you so much for this! Testing this weekend.
PuDLeZ said:
Just wanted to let people know of what I've initially noticed and tested.
* Not laggy like stock is
* Able to format sd card for internal storage
* Official Keyboard case works (didn't use much before)
- show/hide key for virtual keyboard and Lang key don't do anything (at least it appears that way)
- Left 'alt' brings up emoji, right 'alt' brings up symbols on virtual keyboard.
* Auto wake/sleep works with 3rd party case (assume all work since it's just a magnet)
* Auto brightness works but I tested it with a flash light.
Click to expand...
Click to collapse
Did you test the spen by any chance?
VVombat said:
Thank you so much for this! Testing this weekend.
Did you test the spen by any chance?
Click to expand...
Click to collapse
I didn't have software installed that I could use it in but I did put it to the home screen and got the circle indicator of where the tip is so it registers. Of course, there was no Samsung menu... Anything specific you want me to try this evening?
PuDLeZ said:
I didn't have software installed that I could use it in but I did put it to the home screen and got the circle indicator of where the tip is so it registers. Of course, there was no Samsung menu... Anything specific you want me to try this evening?
Click to expand...
Click to collapse
Mhm I'm using mainly Squid and Xodo to annotate and notate stuff. If you have them laying around anyways that would be nice, but if not no need to install and waste your time if I'll install tomorrow anyways. Thank you for your answer!
lineage-15.1-20180614-UNOFFICIAL-gts3lwifi doesn't work for me, bootloops, tried almost everything, etc.
RESOLVED: See below how and why.
Good afternoon. Everything works fine, the stylus in all orientations, the AnTuTu test runs fine and there is no understating of indicators on both stock, Wi-Fi is excellent, both 2.4 GHz and 5 GHz.
There are only 2 inconveniences
- Stereo sound from speakers is only in portrait orientation, and landscape channels do not change. Can you make a patch or fix yourself, you can not even change the channels when you turn, but only make a stereo Sound in landscape orientation (videos and movies often look into it);
- No sound goes to the Bluetooth headphones.
In any case, the firmware is super, thank you very much for the work done.
Hello, how to get Bluetooth working? I connect but no sound
Thank you also
Another problem, the sound slows down and stutters in applications (heavy or simple games)
JWnSC said:
For gapps it shows "arm 8.1" it should be "arm64 8.1"
Edit: 5g seems to be working fine after a resetting WiFi, mobile & Bluetooth. Still can't seem to get audio playing through Bluetooth even though it's connected.
Click to expand...
Click to collapse
edited, thanks
yes, bt audio doesn't work. seems I broke it in last moment...
PuDLeZ said:
Just wanted to let people know of what I've initially noticed and tested.
* Not laggy like stock is
* Able to format sd card for internal storage
* Official Keyboard case works (didn't use much before)
- show/hide key for virtual keyboard and Lang key don't do anything (at least it appears that way)
- Left 'alt' brings up emoji, right 'alt' brings up symbols on virtual keyboard.
* Auto wake/sleep works with 3rd party case (assume all work since it's just a magnet)
* Auto brightness works but I tested it with a flash light.
Click to expand...
Click to collapse
I have official keyboard case too. Unfortunately it's almost unusable in aosp if you need more than one keylayout. What about special keys, aosp doesn't have that triggers what stock rom has. I only could advice 3rd party app, but paid https://forum.xda-developers.com/showthread.php?t=1541916
HardWorker79 said:
I liked the 14.1 version and I seem to like this version as well. It is to early to say more, but why can't you share this with lineage? It would be a dream, if this would be official and we would recieve updates. And maybe they will help you with the missing GPS?
Click to expand...
Click to collapse
Nothing will change with official status except It would create more troubles and bureaucracy there.
Nobody will help. Believe me.
Comses said:
Good afternoon. Everything works fine, the stylus in all orientations, the AnTuTu test runs fine and there is no understating of indicators on both stock, Wi-Fi is excellent, both 2.4 GHz and 5 GHz.
There are only 2 inconveniences
- Stereo sound from speakers is only in portrait orientation, and landscape channels do not change. Can you make a patch or fix yourself, you can not even change the channels when you turn, but only make a stereo Sound in landscape orientation (videos and movies often look into it);
- No sound goes to the Bluetooth headphones.
In any case, the firmware is super, thank you very much for the work done.
Click to expand...
Click to collapse
I have an issue somewhere in audio behavior. Will check it deeper.
Comses said:
Another problem, the sound slows down and stutters in applications (heavy or simple games)
Click to expand...
Click to collapse
in games only? I've not noticed anything in videos.
samsuffit said:
Doesn't work for me.
What I did from Lineage 14.1:
- Upgraded TWRP to v3.2.1.1
- Wiped eveything
- Downloaded BRE2 firmware for my country
- Extracted BL....tar.md5 and flashed it with Odin v3.13.1
- Rebooted in recovery mode to be sure of... still don't know what
- Flashed Lineage 15.1
Then I could see the logo animation until the end, just before the system starts, then 3 boot loops and it went to recovery mode
I repeated the exact same sequence and flashed SuperSU v2.82-SR5, same result.
So...:
- Wipe everything
- Flash BL, CSC and CSC_HOME (no need of AP, system partition) with Odin
- Format/Erase Data
- Flash Lineage 15.1
Again a boot loop, this time without going back automaticaly to recovery mode.
Tried with SuperSU, boot loop...
So... This time I flashed eveything, reboot with Samsung Android, test a little bit, then:
- Flash TWRP v3.2.1.1
- Immediatly reboot to recovery mode
- Format/Erase Data
- Wipe everything
- Flash Lineage 15.1
Boot loop...
Tried with SuperSU, boot loop...
I was able to restore a full backup of my previous Lineage 14.1 installation.
What did I do wrong and which kind of logs do you need to help me to understand?
Thank you and thank you to have integrated S-Pen support, I love this thing. I don't realy need GPS.
Edit: in case it was mandatory I tried with Magisk v16.0 and v16.4 instead of SuperSU. Same boot loop.
If it's because I didn't flash the GAPPS, well... nevermind... I'll wait for something else.
Click to expand...
Click to collapse
Magisk is needed for device certification in Play store. That's because it should be flashed with gapps before first boot. So, rom works without gapps and root well.
For what region you downloaded oreo stock rom? I doubt but maybe samsung has different logic in bootloader for relocatable kernel stuff. It's strange how you restored lineage nougat, because that kernel shouldn't work with oreo bootloader.
edit: i'm wrong about bootloader and nougat, because I use now old twrp with nougat kernel.
Flashed old build. Have audio in bt, but don't have speaker rotation. I was sure it worked before...
If someone used or uses lineageos 14.1, is speaker rotation work there or not?
Hello @bonuzzz, thank you for the reply.
I was able to restore my Lineage 14.1 because I flashed the ARA2 boot loader (tried with Odin the first time, then with my TWRP backup, same result)
bonuzzz said:
If someone used or uses lineageos 14.1, is speaker rotation work there or not?
Click to expand...
Click to collapse
Only with VLC. Stuck in portrait mode with stock player. I don't have any games...
The last thing I need to try is installing the GAPPS... Like I said, I don't want to, so if the problem comes from this, I'll pass. But I have to try to be sure...
In this order from TWRP:
- Flash BRE2 boot loader
- Format Data and wipe everything
- Flash Lineage 15.1
- Flash openGAPPS nano arm64 8.1
- Flash Magisk 16.4
And... It's working...
Well...
I want to cry...
So the GAPPS are mandatory.
Thank you for creating a new os for sm-t820.
BT audio is working for me with Sony mdr zx220bt headphones
Related
Q&A for [ROM][SIRIUS][LP][5.0.2][SM-4.9] CyanogenMod 12 Unofficial [NIGHTLY BUILDS]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][SIRIUS][LP][5.0.2][SM-4.9] CyanogenMod 12 Unofficial [NIGHTLY BUILDS]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Google play and audiofx
The audiofx app doesn't appear to have any effect on the music playing from the google play music app. I've tried going into the audiofx app from within play music, but I just can't get it to work on play music. Not too sure whether audiofx has any affect on other apps other than the default music app. I'm on the latest build (20150111 V2)
Other than that, I can't find any problems. Great work!
no vibration
Hi! This is a great ROM!
Is there a option to activate Vibration?
Bluetooth audio fix by one click
At least for me with my car hi-fi (LAC7000) on the latest nightly dirty flashed over 12. Click Bluetooth, than the device connected for, the gear next to it. Uncheck the first and the third. Like the screenshot attached.
Recovery is not Ok. Lopping on boot.
I have flashed recovey like that
fastboot flash recovery openrecovery-twrp-2.8.3.0-sirius.img
After it, My ph is looping on logo. Pls fix bro.
greenhorn82 said:
Hi! This is a great ROM!
Is there a option to activate Vibration?
Click to expand...
Click to collapse
As in vibrate mode? Sure! Just keep pressing the volume down button when there's no media playing and you'll feel the phone switch to vibrate.
TheDefaultState said:
As in vibrate mode? Sure! Just keep pressing the volume down button when there's no media playing and you'll feel the phone switch to vibrate.
Click to expand...
Click to collapse
No, I mean sound and viration at the Same time.
greenhorn82 said:
No, I mean sound and viration at the Same time.
Click to expand...
Click to collapse
Media volume can be changed within the sound and notification settings in the settings and also when media is playing. There's also an option to also vibrate for calls in the sound and notification settings as well.
Thanks!
After closely watching the development for a month, yesterday I decided to flash it with some outdayed cwm based PhilZ Touch recovery. The install was not successful, and even broke the recovery :S This freaked me out a bit, but after successfully fastboot-flashing stock firmware and newest cwm, I tried again today. The result was the most butter smooth android lollipop experience! Thanks for this amazing rom
Recovery Doesn't work for me
Hi !
First thanks for your amazing rom Infected_ .
For me I have a problem with recovery , it doesn't work with CM12 Recovery ( I can't flash any zip files from my sd card), I must install CM11 recovery V6.0.5.1 which is working very well. When I want to update cm12, I must install CM11 recovery each time.
Do you have a solution for this?
Reboot doesn't works for me, only power off my phone.
Thanks a lot
Build 2015-01-14
Big thx to you infected for your amazing work. Keep it up !
build 2015-01-14 with included kernel
- bluetooth is seriously ****ed up (reboot, switching on/off doesn't help) (i hear something for a second or two then it stops)
- call keeps ending after a minute or so (without speaker phone, i didn't try speaker phone)
That's it
Lockscreen background
Maybe i`m blind, but is there a point to change the Lockscreen background ???
Upgrading to the 20150116 from 20150112v2 via a dirty flash caused it to fail to boot (stuck at the Sony logo). Required me to format System and clean install. Total pain in the ass cause I hadn't done a backup (I'm an idiot, complacency is gonna be my downfall).
Just a gentle reminder to do backups frequently when flashing nightlies!
Super stoked with the ROM, the camera quality is fantastic (better than stock I think - I rooted before you could backup your TA partition and I think my camera quality was never quite the same).
Solution?
I had the exact same problem with the kernel you use, only I managed to wipe both the rom and the recovery. After I flashed a stock fw and the newest cwm (http://forum.xda-developers.com/showthread.php?t=2702001) I could finally flash this rom.
Testing Results for latest version (nightly 1-16-15)
This build is in very good shape. Throughout my wanderings, I have noticed that only a few things that could be fixed (these might have already been recommended, but I am posting them anyways). First, the physical camera button does not work. I understand it is hard to build that button into a CM build, but I figured I would just write it down. I already know that someone has posted this recently, but I would just like to confirm. Another thing is that the double tap to wake feature in the display settings does not function. It can be selected, but the feature will not function, and sometimes the toggle undoes itself after a short period of time anyways. Although, it does not function even right after enabling the feature through the settings. I would also like to ask about charging. I believe CM does not support quick charging at this time, but I have noticed that it takes significantly longer to charge my device than stock rom. I have tried a variety of chargers, and I achieve the same result. I am just using standard 2.0-2.4 Amp chargers that my device has always used. I just have noticed that it takes a long time to charge (significantly longer than my OPO, but that thing charged faster than my Z2 in the first place). Last thing that I have noticed is very minor. On stock rom, the camera had an option for 16:9 15.5 MP shots that I frequently used since I do not really like 4:3 photos. I know the camera was a pain to get working in the first place, but this setting is not present anymore (in the included app and third-party apps). Anyways, these builds are really nice, much better than I expected for nightly revisions, so thank you!
DT2W works 20150118.
TWRP
Hi there,
first of all great work! The Rom ist just running fine on my device. The only problem seems to be the delay on calls.....but that's nothing to worry about^^. The other problem i have.....i flashed the twrp recovery several times. The twrp recovery does start....but only with the *.bat installer in windows. When i try to start it from the device it doesnt work. Instead, the cm12 recovery does start. Did i miss smth?
Greets form germany ;D
Got some problems with last build. Phone restarts after shutting down. Calls on Viber, Hangouts and Skype are broken. So I cant hear the other person. but he can hear me.
Su binary
cannot update my su binary..any suggestion?
Updating SuperSu
freshvibez77 said:
cannot update my su binary..any suggestion?
Click to expand...
Click to collapse
This is an issue, but you can update supersu by flashing the latest zip file here: download.chainfire.eu/supersu
I'm sorry for not posting a link, but XDA won't allow me to because of how new my account is. Just copy and paste that to get to Chainfire's SuperSu download page
DISCONTINUED DUE TO LOWER PERFORAMNCE THAN LEGACY!!!
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What are Nightly builds? Auto compiled builds of the latest CyanogenMod source from github. This version change each night and aren't officialy supported. If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).
All bug reports that don't meet this conditions will be ignored:
You have the kernel provided in the zip file
You made a clean flash and didn't restore anything
You made a detailed review of the problem
You provide a logcat in a .txt file (Search internet)
You provide dmesg or last_kmsg if it is a kernel panic (Search internet)
EVERY AND ALL REPORTS OF BUGS WITHOUT LOGS WILL BE IGNORED. DO NOT POST WITHOUT LOGS BECAUSE NOTHING WILL BE SOLVED. THANKS. I CAN'T DO WITCHCRAFT.
What's working :
Booting
RIL and Mobile Data (Should work for Dual-Sim also) !!! SOMEONE CONFIRM
Storages (Internal and External)
Notification Led
Flashlight
Sound
Wi-Fi
Bluetooth
GPS
Tethering (BT, Wi-Fi, USB)
Sensors
Camera
Browser
Autoselecting your phone based on your MODEM partition
BATTERYLIFE SHOULD BE CRAAAAZYYYY
What's not working :
Video playback
Fm Radio
NFC (I never used it and it is a pain to separate from other versions other than P710)
Other things might be broken please report with logs
Instructions :
Reboot to recovery
Make a full wipe (/system, /data, /cache, /dalvik-cache)
Flash the CM11 zip
Flash Gapps (if you want)
Make factory reset
Reboot to system
Downloads :
ROM:
Older versions:
cm-11-20160222-UNOFFICIAL-vee7-RC1.zip
md5: abe9b3aaa42a3e8dd6f9bdd96bdb02c3
cm-11-20160222-UNOFFICIAL-vee7-RC2.zip
md5: 5dafd54589f603b43780bee5a5d134da
GAPPS:
pa_gapps-modular-nano-4.4.4-20150308-signed.zip
If you really appreciate my work on the L7 II series please consider getting me a coffee right now
Credits :
@Caio99BR
chil360
Y300 Team
TeamHackLg
CyanogenMod
Xda for this nice home
Donators (BIG THANKS!!!) :
XDA:DevDB Information
CM11 vee7 CAF, ROM for the LG Optimus L7 II
Contributors
neutrondev
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CM
Version Information
Status: Stable
Created 2016-02-22
Last Updated 2016-02-22
Reserved
Changelog :
22.02.2016 ---> Initial Release RC1
You have the bugs and what is working in the first post
24.02.2016 ---> RC2
overclocked cpu
added governors
added hardware monitoring for battery
probably fixed dual sim
Reserved
Wow! This so fast. hahaha!
I have P716 and I will flash then as soon as I download it.
'll test and post the feedback. If you need some test of roms for dual sim devices you can ask me.
Anyway thank's for your efforts for our device.
In P716 boot is run( although the boot in this is slightly slower than the other ROMs, but ok), so start the device,
sim card's are detecded, but when i try enable then, an error occurs and activation failed, and return to mesage "new sim card detected....", then I was not able to activate neither one sim card.
So, return to the welcome page and after choose the language, a bar run, and aking "just a sec...", after few minutes, setup wizard crashes "Unfortunately, Setup Wizard has stoped". Device does not start.
I was trying reboot for sometimes, but every time the same occurs.
I read and follow all instructions and flash this rom two times.
As the device does not start, I was unable to get Catlog. Sorry.
Edit:
Now I tried to flash without GAPPS and it worked.
But, Setup Wizard not loaded. it probably crash. Before the first boot go directly to the Home screen. All configuration, wifi, data, time, language, ... was done manually.
Too, simcard's faliled to activated. included by terminal. I will provide the logcat soon. I'm sleepy now. hehe
After, I reboot to recovery and flash GAPPS now it worked. When rebooted playstore app not works in first time, after new rebooted, playstore app works but was slowly for now all ok.
The rest all ok for now. too videoplayback is ok.
What is CAF? How is it different from normal and your previous cm11 build.
XDA-00 said:
What is CAF? How is it different from normal and your previous cm11 build.
Click to expand...
Click to collapse
First search result in google: https://www.reddit.com/r/Android/comments/1rt9md/eli5_what_is_caf_why_is_cm_going_caf_affects_the/
shhnedo said:
First search result in google: https://www.reddit.com/r/Android/comments/1rt9md/eli5_what_is_caf_why_is_cm_going_caf_affects_the/
Click to expand...
Click to collapse
So Qualcomm devices(like my p715) will have increased performance/battery life with custom roms having CAF. Right?
XDA-00 said:
So Qualcomm devices(like my p715) will have increased performance/battery life with custom roms having CAF. Right?
Click to expand...
Click to collapse
Something along those lines, yes.
Sorry i don't understand one thing, to flash this rom, and Also your cm12-13, i have to use twrp3 or can I use my old cwm, the old no-touch version? Sorry for my bad english
MustangBR said:
In P716 boot is run( although the boot in this is slightly slower than the other ROMs, but ok), so start the device,
sim card's are detecded, but when i try enable then, an error occurs and activation failed, and return to mesage "new sim card detected....", then I was not able to activate neither one sim card.
So, return to the welcome page and after choose the language, a bar run, and aking "just a sec...", after few minutes, setup wizard crashes "Unfortunately, Setup Wizard has stoped". Device does not start.
I was trying reboot for sometimes, but every time the same occurs.
I read and follow all instructions and flash this rom two times.
As the device does not start, I was unable to get Catlog. Sorry.
Edit:
Now I tried to flash without GAPPS and it worked.
But, Setup Wizard not loaded. it probably crash. Before the first boot go directly to the Home screen. All configuration, wifi, data, time, language, ... was done manually.
Too, simcard's faliled to activated. included by terminal. I will provide the logcat soon. I'm sleepy now. hehe
After, I reboot to recovery and flash GAPPS now it worked. When rebooted playstore app not works in first time, after new rebooted, playstore app works but was slowly for now all ok.
The rest all ok for now. too videoplayback is ok.
Click to expand...
Click to collapse
I need dmesg and logcat and logcat -b radio. we will fix it
@MustangBR
Flash this in recovery then tell me if it works.
https://www.androidfilehost.com/?fid=24421527759886035
shhnedo said:
Something along those lines, yes.
Click to expand...
Click to collapse
Great!
Its strange for me TWRP 3x recovery writes during installation about "unable to mount system on block 14 and data on block 20 device is busy".Nothing wrong,just strange.
First bug just on first start,setup wizard "unfortunatelly stopped" after lang selection,with or without SIM and all.Maybe reason is i am flashing not provided gApps pack but just micro[dont need lots of junk in /system]. Logcat named xD is in attached RAR.May be You will see what went wrong,sir.
Flashed without gApps,first start is working well=) .BTW if i install that micro gApps after first start,evth is fine.
Then,about camera.While focusing camera app crushes,the same was on Weritos CM with his videorecording fix.Logcat named camera attached[not filtered by error type and thats why too large,sorry].
Gonna test and look now,what else can I see.
Okay,turned developer settings ON,setted all animations to 0.5x,seems all works well on my 713.
And a question,will ART work better than Dalvik?
neutrondev said:
I need dmesg and logcat and logcat -b radio. we will fix it
@MustangBR
Flash this in recovery then tell me if it works.
https://www.androidfilehost.com/?fid=24421527759886035
Click to expand...
Click to collapse
Log are attached.
I was not able to download RIL_DS.zip, tried several mirror, but will not download.
I'll try to download more times, so get flash it I reply here.
Edit:
I was able to download now and flash it.
Remain the same any sim can not be activated. New log's below
MustangBR said:
Log are attached.
I was not able to download RIL_DS.zip, tried several mirror, but will not download.
I'll try to download more times, so get flash it I reply here.
Edit:
I was able to download now and flash it.
Remain the same any sim can not be activated. New log's below
Click to expand...
Click to collapse
I will look into it. It seems there are some issues .
@MustangBR add this line to build.prop and restart
ro.telephony.ril_class=LGEQualcommUiccRIL
Okay,played a bit with ROM.
First,smth is with lockscreen when music is played.Pictures sometime stuck,and even with player off it sometimes freezes a bit while unlocking.
Second,few times stuck on main screen with music played,one time phone even rebooted itself,other times i pulled battery.
Then,as in another CM builds,maximum volume is ABNORMAL high.
Also,sometimes battery indicates strange.I was goin home with 9%,then raised to 14% and now 20%.
Will try to catch error about freezes in music/locker soon,probably tomorrow will send an logcat.
ART works good=)
And my opinion:This will be the best ROM for vee7.Holds battery great,and works great[i changed launcher to Nova for myself to have biggest grid in menu]
And can i ask to add Smartass Governor to kernel?
DS_katauri said:
Okay,played a bit with ROM.
First,smth is with lockscreen when music is played.Pictures sometime stuck,and even with player off it sometimes freezes a bit while unlocking.
Second,few times stuck on main screen with music played,one time phone even rebooted itself,other times i pulled battery.
Then,as in another CM builds,maximum volume is ABNORMAL high.
Also,sometimes battery indicates strange.I was goin home with 9%,then raised to 14% and now 20%.
Will try to catch error about freezes in music/locker soon,probably tomorrow will send an logcat.
ART works good=)
And my opinion:This will be the best ROM for vee7.Holds battery great,and works great[i changed launcher to Nova for myself to have biggest grid in menu]
Click to expand...
Click to collapse
Will add governors and Hardware monitor of battery sure.
neutrondev said:
I will look into it. It seems there are some issues .
@MustangBR add this line to build.prop and restart
ro.telephony.ril_class=LGEQualcommUiccRIL
Click to expand...
Click to collapse
No way.
Now when to open dialer app this is crashes. The same occurs when trying to configure and activate simcard in configurations he crashes.
Also now show only one sim card symbol on the top bar of the screen, before this command appeared two.
I confirm all @DS_katauri has written. I noted the same things. + sometimes after pressing the power button to block screen and press it again to unblock screem takes several seconds with black screen until to show the screen.
GPS(included navigation mode), camera, wifi, sensors, usb, sound,video, browsers are fine, batterylife is unbelievable, very good.
Not a ROM bug,i forget to use some autostarts manager and disable sync=)
Seems ROM is stable,no reboots for night.Just damn gApps.
@MustangBR
Try the new version. Clean flash. Tell me if Dual Sim works.
@DS_katauri
Overclocked CPU and governors are there.
Also battery is monitored with kernel interface now.
Hello partners!!!
Here we share the functional rom last for our MaX2!
At the request of many colleagues, I created this CM13 based on 29 September.
And adding the entire S19 firmware to have it fully updated and upgraded.
Fully functional quick and steady myself I was surprised with the performance tests ... 143,000 AnTuTu with hot enough to test mobile Cold believe can draw record numbers ...
To say that I still have problems with slow motion ....
I'm starting to not know where mistakes can be ....
Libs I managed to trace the entire structure of the official EUI and still does not work ....
Permits revised from top to bottom ...
Libs mother and CM13 ... zilch ...
Perhaps there may be something in the kernel (boot) but there are limited ...
As I change anything to do directly test the ROM does not start or comes into infinite loops ....
So ... I leave the rom completely finished but with 2 bugs.
And each user knows what he wants or what you need.
But the ROM is fully functional for day to day and is really fast and stable.
BUGS:
1 Slowmotion nonfunctional. The rest of the camera is fully functional with 21mpxl.
2nd nonfunctional IRDA. (With this ... if not roms stocks moment ... little we can do ...)
The first!!!! IMPORTANT
We do not force anyone has use or install the rom.
We do not make yourself responsible for possible errors or brik the terminal.
We simply share our work for all so that we can have the terminal in our language.
RoM CM13
CM13 based official of the day 29/09/2016
s19 official firmware with all its libs + kernel.
Rom eliminated completely stock only apks that created conflict with our terminal.
Doze functional.
Sound perfect.
wiffi
BT
Integrated Pico gapps
Some improvements in the build.prop
Installation Method
We have created a zip FULL.
ROM contains firmware s19 + recovery + 5.8 everything necessary for you to come firmware do not have problems to come and stay all properly installed and running smoothly or silly scares.
* Download rom.
* Enter the zip rom on your terminal.
* Restart recovery.
* Since the recovery to the wipes.
* Once the wipes, select the zip and install.
* Once installation is complete, restart System.
* Wait for the rom you first start, it takes a few minutes not alarmed.
downloads TeaMSpaiN
CM13 ROM S19: https://mega.nz/#!SwIHSB7C!rFQJsQxx-J-RI121GWsaC6DAhDkLHzJdDPvdVabZRRY
Your comments on this rom.
And if you find any bug report to try to fix them.
Greetings comrades!
DONATE PAYPAL: https://www.paypal.me/ParasiteYgaseOso
thanks for sharing this
Sent from my Le X821 using XDA-Developers mobile app
Thank you! I will try this rom.
Changing action of the left hardware button doesnt work, it just keeps working as "menu" button.
ArctiX said:
Changing action of the left hardware button doesnt work, it just keeps working as "menu" button.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=68885350&postcount=235
meangreenie said:
http://forum.xda-developers.com/showpost.php?p=68885350&postcount=235
Click to expand...
Click to collapse
Thanks, that worked
Thanks for your work! Does Camera API 2 work this time?
I flashed this rom today. Everything works well for me!
wiped system and dirty flashed from previous cm13 and it seems to be running very well
Nice, smooth, we will see battery performance compared to Mokee.
- Camera2 api doesnt work
- Slowmotion doesnt work
- IR doesnt work
- For me, missing Aegis app from Mokee is a big step back
Sent from my Le X820 using Tapatalk
@ParasiTe_RemiX Did you build this from source or port from another device?
Beautiful ROM, but for me in Japan for some reason LTE is not working, I can get only HSPA. This is strange because in the stock eui I can use LTE no problem.
Also the hardware buttons light up when you touch the screen, on Eui they only lit up when you touched the buttons, not the screen.
Oh, and after checking now, the AudioFX doesn't work system wide, only in the cm music app, in e.g. YouTube or Tidal, it doesn't make any change in sound.
Notification light is blinking when charging, is there any way to make it always on and not blinking?
ArctiX said:
Also the hardware buttons light up when you touch the screen, on Eui they only lit up when you touched the buttons, not the screen.
Oh, and after checking now, the AudioFX doesn't work system wide, only in the cm music app, in e.g. YouTube or Tidal, it doesn't make any change in sound.
Notification light is blinking when charging, is there any way to make it always on and not blinking?
Click to expand...
Click to collapse
For the hardware buttons backlight, you can turn them off in settings/buttons or you can turn the brightness of them right down, via editing the max_brightness file.(can't remember the path name atm, but can easily google)
For the charging light, you can turn the charging light off in settings/display. The options for them don't seem to work unfortunately.
When I plugged my phone to the computer I noticed a blank file with no name and hard disk icon on my sd card, when I tried to delete it, it wiped my whole sd card! don't delete that file if you see it.
Hello, This ROM is also compatible with the version Le Max 2 Pro?
pickmod said:
Hello, This ROM is also compatible with the version Le Max 2 Pro?
Click to expand...
Click to collapse
No, you can't flash it for X620!
bahuy2003 said:
No, you can't flash it for X620!
Click to expand...
Click to collapse
I have Le Max 2 Pro X820... it is compatible?
Thank you, looks really production quality
This is extremely close to what I wanted from this device: Straighforward CM13 (ok, I'll want CM14 next), no bloat, functional and fast.
Also rooted, which means I control my device, not some vendor who wanted my money but fails to cede the control over what he sold.
And most importantly: No longer any of these Chinese apps, which refused to get uninstalled while they claimed about any privilege Android can provide.
I sure hope security patches will be coming for years as the device looks powerful enough to last a long time.
Only bug I've found so far is apps like Hangouts and Duo can't access the Camera for video calls. Apart from that, flawless so far.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my version for the n5120 on LineageOS 16.0.
At first I want to thank @forkbomb444, @rINanDO, @ChronoMonochrome and all the others who are working on the exynos 4 devices, also big thanks to @prkfsz for donating me a n5120 and also the shipping cost.
Also big thx to @cngbrick for donating a n5100.
It already took me a few hundred hours and it will become more and more to support you with great updates.
it's mostly based on my work on for the Samsung Galaxy Note 10.1 (GT-N80XX) devices.
Here you can see how far everything is working:
Spoiler: Whats working
Boot
Audio
Bluetooth
Graphics
Main camera
Wifi
USB
Video playback (HW/SW)
OTA Updates
RIL
GPS, not sure if completely
Tethering via USB, WIFI and Bluetooth
consumerir transmitter
Sensors
Spoiler: Whats not working
Bluetooth headset in a mobile call
Some apps because of decoding issues
GPS fix, but navigating is working fine
Maybe more
Spoiler: Links
TWRP
N5100 Rom
N5110 Rom
N5120 Rom
If you're having problems with decoding some videos (blurried),
this is mostly because the avc hardware decoder gets configured wrongly.
You can disable it with my magisk module:
avc_decoder_disabler.zip
If you are going to use Gapps,
I recommend to use the pico package!
https://opengapps.org/
For the others, you can use microG if you want, I've enabled signature spoofing.
If you want to pass the safety net check, root your device with magisk.
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Spoiler: Changelog
13.02.2021
14.02.2021
17.02.2021
19.02.2021
24.02.2021
25.02.2021
26.02.2021
09.03.2021
24.03.2021
25.03.2021
07.04.2021
22.04.2021
14.07.2021
10.08.2021
26.08.2021
08.09.2021
30.09.2021
12.12.2021
23.12.2021
09.01.2022
15.02.2022
20.04.2022 Re-Implemented Boeffla Sound
Spoiler: How to improve GPS
You could use a gps.conf from https://app.box.com/s/w57s1v1n3hie7l5lk28i for your location and replace /system/etc/gps.conf.
Or you try GPS Server Optimizer app for a faster 3D fix.
For both methods you need root rights.
Spoiler: How to encrypt
If you plan to encrypt your device, the first step is to backup all your important stuff.
Reboot into recovery and choose:
Wipe->Advanced Wipe->Data (check)
Choose "Repair or Change File System" and afterwards "Resize File System".
After this step, choose Reboot System and you can start to encrypt your drive.
If you can't find this option in the settings by your own, use the search function and type "encryption" and you can start.
Spoiler: How to install it?
Instructions
Wanna improve your sound configs, control your charging current and more?
Now you can use my app to access boeffla sound and other configurations, there will follow more functions.
Exynos4 Kernel Manager - Apps on Google Play
This app provides Boeffla sound control and other kernel + charging tweaks
play.google.com
XDA:DevDB Information
[ROM][9.x][N5100/N5110/N5120][STABLE] LineageOS 16.0, ROM for the Samsung Galaxy Note 8.0
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.3.0
Based On: LineageOS
Version Information
Status: Stable
Created 2021-02-09
Last Updated 2022-04-20
XDA DevDB Information
[ROM][9.x][N5100/N5110/N5120][STABLE] LineageOS 16.0, ROM for the Samsung Galaxy Note 8.0
Version Information
Status:Alpha
Created 2021-02-09
Last Updated 2021-02-09
Why devdb information says stable and version information shows alpha?
jjgvv said:
XDA DevDB Information
[ROM][9.x][N5100/N5110/N5120][STABLE] LineageOS 16.0, ROM for the Samsung Galaxy Note 8.0
Version Information
Status:Alpha
Created 2021-02-09
Last Updated 2021-02-09
Why devdb information says stable and version information shows alpha?
Click to expand...
Click to collapse
Sorry, copy paste error....
It is alpha, the first test version.
html6405 said:
Sorry, copy paste error....
It is alpha, the first test version.
Click to expand...
Click to collapse
Thanks for your ROM. Tried to install it on N5110, but nothing worked, have you built it for this version? If not yet, than may I be able to change updater-script somehow? Want to test it very much, thanks.
nCoV said:
Thanks for your ROM. Tried to install it on N5110, but nothing worked, have you built it for this version? If not yet, than may I be able to change updater-script somehow? Want to test it very much, thanks.
Click to expand...
Click to collapse
This version is for the n5120, but just wait a little bit,
i will try to build a version for the n5110,
I dont own this device.
html6405 said:
This version is for the n5120, but just waint a little bit,
i will try to build a version for the n5110,
I dont own this device.
Click to expand...
Click to collapse
Great. I'll be ready to test ASAP and report here.
if necessary, i am also ready to become a gt-n5110 firmware tester
[email protected] said:
if necessary, i am also ready to become a gt-n5110 firmware tester
Click to expand...
Click to collapse
Ok great, but at first I have to buy at least a n5100, with this I could also build for n5110 because they are equal enough.
Maybe we find another device donator or I will wait until I can buy it from the donations.
Update 13.02.2021:
Fixed livedisplay support
Fixed zram and set it to 400MB
Fixed magnetic sensor, the rest is still in progress...
Only via OTA.
Update 14.02.2021:
First test build for GT-N5110, now I need you.
Hi @html6405,
First thanks for working on this device.
I am rocking a n5110 and just flashed the new build (in TWRP 3.3.1-0). I formatted all filesystems (cache, system and data) (not just wiping) as ext4.
Unfortunately, my device is bootlooping at first startup.
I just flashed the ROM, nothing else.
As doing an adb logcat does not work during startup, I tried flashing this zip and retried getting a logcat, to no avail. The device is still bootlooping for 10+ minutes.
Maybe you can instruct me to help you better.
Mynacol said:
Maybe you can instruct me to help you better.
Click to expand...
Click to collapse
Thanks for testing it, I had to build this completely blind because I still dont own this device.
I will create a adb enabled kernel for tomorrow and then I hope you can provide me a logcat.
html6405 said:
I will create a adb enabled kernel for tomorrow and then I hope you can provide me a logcat.
Click to expand...
Click to collapse
Nice. Waiting for it.
Some further observations/clarifications:
The kernel is probably fine. When booting normally, the Lineage boot animation is running. When connecting the tablet to a charger, it goes in this "charging" mode just fine.
The tablet is not bootlooping, but rather stuck in the booting process. It just stays at the Lineage boot animation. No restarts.
Mynacol said:
Nice. Waiting for it.
Some further observations/clarifications:
The kernel is probably fine. When booting normally, the Lineage boot animation is running. When connecting the tablet to a charger, it goes in this "charging" mode just fine.
The tablet is not bootlooping, but rather stuck in the booting process. It just stays at the Lineage boot animation. No restarts.
Click to expand...
Click to collapse
Hmm I was able to boot it up on my n5120. But it is very complicated this way, I think I will need a own device...
Have had time to play a little with rom for 5120. Looks nice overall, nice work pal @html6405!
I couldn't make some things work tho:
(I am sorry, i am not a 'pro' as a tester. I don't know how to provide logs. If there is some crash course in testing i might try, but time is scarce nowadays.)
ROM with MicroG = NO boot. Gets stuck in the first loop, after a while aborts and restarts to TWRP.
(Haven't really tested with gapps, don't use that)
ROM alone = BOOT.
Clean flashed, haven't tried anything else.
Blutooth: Tried to connect to a keyboard that works ok with everything else. Finds it but loses connection very quickly. Hard to reconnect. Seems very unstable.
Wifi: works. Seems stable.
Mobile calls: work, after two reboots.
SMS: work
MMS: don't work directly, but that usually is a matter of finding the right settings for your provider.
Mobile data: not working.
Autorotate: Not working. When you start the camera it flips the autorotate once but you can't turn it back. Goes away with rebooting but the same thing then.
Cameras don't work. Video does tho.
That's all i had time for tonight. Hope it helps in some way!
Thanx for all the work! Looking forward to next versions!
prkfsz said:
ROM with MicroG = NO boot.
Click to expand...
Click to collapse
Hmm microG should actually work, I've set the permissions and enabled signature spoofing.
How have you installed it?
prkfsz said:
Blutooth: Tried to connect to a keyboard that works ok with everything else. Finds it but loses connection very quickly. Hard to reconnect. Seems very unstable.
Click to expand...
Click to collapse
Hmm ok, I will test one of mine.
prkfsz said:
MMS: don't work directly, but that usually is a matter of finding the right settings for your provider.
Mobile data: not working.
Click to expand...
Click to collapse
Yep, I'm struggling with this the last days...
prkfsz said:
Autorotate: Not working. When you start the camera it flips the autorotate once but you can't turn it back. Goes away with rebooting but the same thing then.
Click to expand...
Click to collapse
Yes, the sensor isnt working yet, I have to overwork the whole hal. It was already a big fight to get the light, proximity and magnetic sensor working.
You could disable auto rotation.
prkfsz said:
Cameras don't work. Video does tho.
Click to expand...
Click to collapse
Main camera should work fine, doesn't it?
html6405 said:
Hmm microG should actually work, I've set the permissions and enabled signature spoofing.
How have you installed it?
Hmm ok, I will test one of mine.
Yep, I'm struggling with this the last days...
Yes, the sensor isnt working yet, I have to overwork the whole hal. It was already a big fight to get the light, proximity and magnetic sensor working.
You could disable auto rotation.
Main camera should work fine, doesn't it?
Click to expand...
Click to collapse
I installed microG in TWRP, directly after the rom, without booting the rom in between. As i always do with microG. I just didn't run the patcher since you said you enabled the signature spoofing. First time I chose factory reset between flashing and booting, and the other time without it. Same result.
I didn't get any of the cameras to work. The app opens, i can press the shutterbutton but no shots are made. Same for both cameras. But the videos are made and they lay obediently in the gallery.
Today i'm flash your rom for gt-n5110
and...this working! (i not install gapps)
in all the little time of testing, I found the following things:
Spoiler: Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Spoiler: Working
Camera
Wifi (internet)
Keyboard! I'm really surprised, because in lineage 14.1 the keyboard did not work and I thought it was a problem with the bluetooth adapter (keyboard: vontar)
Works connected to a bluetooth speaker with feedback
Recorder (sound and screen)
Root worked after install zip
SPen, using spencommand 1.2.30* (root)
IR port working, using galaxy s4 universal remote
audioFX
Spoiler: Bugs
Memory permission strange working, first time all apps give error and not work, but now working
Root is not installed initially, i think you want make it, because app magisk installed
when the device starts, in the middle of the setup there is a page about the mobile network, which is not on the tablet
have flashlight button in upper spoiler
This is a very good test firmware for me. I also want (if possible) that there was a setting of the vibration strength as on lineage 14.1, otherwise it is quite strong and unpleasant)
[email protected] said:
Today i'm flash your rom for gt-n5110
and...this working! (i not install gapps)
in all the little time of testing, I found the following things:
Spoiler: Screenshots
View attachment 5223927View attachment 5223929
Spoiler: Working
Camera
Wifi (internet)
Keyboard! I'm really surprised, because in lineage 14.1 the keyboard did not work and I thought it was a problem with the bluetooth adapter (keyboard: vontar)
Works connected to a bluetooth speaker with feedback
Recorder (sound and screen)
Root worked after install zip
SPen, using spencommand (root)
IR port working, using galaxy s4 universal remote
audioFX
Spoiler: Bugs
Memory permission strange working, first time all apps give error and not work, but now working
Root is not installed initially, i think you want make it, because app magisk installed
when the device starts, in the middle of the setup there is a page about the mobile network, which is not on the tablet
This is a very good test firmware for me. I also want (if possible) that there was a setting of the vibration strength as on lineage 14.1, otherwise it is quite strong and unpleasant)
Click to expand...
Click to collapse
I try to install it on my N5110 i have an error, how did you do ?
EDIT: i have update TWRP and now it's ok
prkfsz said:
I didn't get any of the cameras to work. The app opens, i can press the shutterbutton but no shots are made. Same for both cameras. But the videos are made and they lay obediently in the gallery.
Click to expand...
Click to collapse
Does any of your cameras capture at all?
Who are we?
YAAP is a project founded by Adhitya Mohan (@poad42) and Ido Ben-Hur (@idoybh) with the goal of staying close to AOSP in design goals, offer a clean interface, do as much as original development as possible and avoid becoming a kitchen sink and cherry picked mess.
Bug reporting:
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab dmesg . (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Kernel Source
ROM Source
Download ROM
Recovery
Flashing Procedure:Have OOS11 flashed on both slots
1. Flash Recovery with "fastboot flash boot boot_yaap.img"
2. Boot recovery, format data
3. Sideload rom with "adb sideload <rom-name>.zip" [*Gapps are included*]
4. Reboot to System
5. Rejoice
To update the rom:
With inbuilt updater app, select new rom zip from storage, flash.
OR
reboot to recovery, sideload rom zip, switch slot, reboot.
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest OOS 11.x.x
Based On: AOSP
Version Information
Status: Stable
Created 2021-05-27
Last Updated 2021-05-29
Working:
Camera/Video/Mic
Fingerprint
Dash Charging/USB stuff
DRM(Netflix,prime video playback)
IMS (VoWIFI/VoLTE)
RIL
Video playback
Wi-Fi
Alert slider, Panel modes, HBM stuff
Permissive kernel
SafetyNet
Encryption
Note: The ROM includes gapps with some pixel additions.
Reserved
Finally yaap for op7...
I will take this rom under consideration..as i always like trying new roms on my devic
Update: 29May21:
Notch mask on landscape
FOD now hides when keyboard is opened at lockscreen
Used OP7 build FP and release keys to make Yono app work
Rom link has been updated**
This is the first custom rom (and I tried almost every rom on the OP7 forum) that has NO PROBLEM with 5ghz wifi and, above all, "ok google" working with SCREEN OFF... I don't know how you managed to do it but awesome, very good work!!
I misread the installing instruction and installed it in another way... I flashed it using the orangefox recovery that I found at this link:
[RECOVERY][DUALBOOT][Unified][A10][A11][OOS11]Orangefox-DualBoot-Unified-Reborn[21-03-2021]
Is it possible to get this recovery as an image file which can be used with 'fastboot boot recovery.img'? The reason I am asking is because the official magisk doesn't work if a recovery is installed and I prefer to use the official magisk then...
forum.xda-developers.com
I don't know if it's fault of this installing method or magisk's fault, but I don't pass safetynet and so google pay doesn't work -- no big deal for me anyway
Also, there's a couple of bugs, for example on the AOD the fingerprint icon partially overlaps with the battery percentage; and I cannot find a way to hide the "pill" (I mean the little white bar at the bottom of the screen) -- in fact if in YASP settings -> navigation bar I uncheck "enable navigation bar", the pill disappear but the back gesture doesn't work anymore (while the Home and Multitasking gestures still work)
Overall is a very good rom!! The battery also seems pretty good even if I'm using it for only a few hours
uhero2 said:
This is the first custom rom (and I tried almost every rom on the OP7 forum) that has NO PROBLEM with 5ghz wifi and, above all, "ok google" working with SCREEN OFF... I don't know how you managed to do it but awesome, very good work!!
I misread the installing instruction and installed it in another way... I flashed it using the orangefox recovery that I found at this link:
[RECOVERY][DUALBOOT][Unified][A10][A11][OOS11]Orangefox-DualBoot-Unified-Reborn[21-03-2021]
Is it possible to get this recovery as an image file which can be used with 'fastboot boot recovery.img'? The reason I am asking is because the official magisk doesn't work if a recovery is installed and I prefer to use the official magisk then...
forum.xda-developers.com
I don't know if it's fault of this installing method or magisk's fault, but I don't pass safetynet and so google pay doesn't work -- no big deal for me anyway
Also, there's a couple of bugs, for example on the AOD the fingerprint icon partially overlaps with the battery percentage; and I cannot find a way to hide the "pill" (I mean the little white bar at the bottom of the screen) -- in fact if in YASP settings -> navigation bar I uncheck "enable navigation bar", the pill disappear but the back gesture doesn't work anymore (while the Home and Multitasking gestures still work)
Overall is a very good rom!! The battery also seems pretty good even if I'm using it for only a few hours
Click to expand...
Click to collapse
regarding safety net, it'll only fail if magisk is flashed, n magisk hide isn't enabled. Without magisk it should pass safetynet by default.
google hotword detection, the credit goes to yaap team.
I'll check that charge string on aod
There's no option to hide nav bar. You should probably ask yaap team for it
escapee_skp said:
regarding safety net, it'll only fail if magisk is flashed, n magisk hide isn't enabled. Without magisk it should pass safetynet by default.
google hotword detection, the credit goes to yaap team.
I'll check that charge string on aod
There's no option to hide nav bar. You should probably ask yaap team for it
Click to expand...
Click to collapse
Yes, I don't know why but magiskhide was disabled by default, now I have enabled it and safetynet correctly passes, so google pay now works!! Thank you. I also tested the battery and I can confirm is better than OOS and than every other custom rom I tried.
But I have serious issues with calls... I use the google phone app. Whenever I receive a call I cannot use the volume buttons to adjust volume; swithing between ear speaker and handsfree doesn't work; the proximity sensor doesn't work and if I turn off the screen manually with the power button, if I turn it on again the UI become buggy, often the screen stays black and sometime the phone shuts down by itself and goes to "qualcomm crash dump"... Can you please try if the calls are working correctly for you? Before blaming the rom I would like to ensure that isn't an app I have installed causing these issues
uhero2 said:
Yes, I don't know why but magiskhide was disabled by default, now I have enabled it and safetynet correctly passes, so google pay now works!! Thank you. I also tested the battery and I can confirm is better than OOS and than every other custom rom I tried.
But I have serious issues with calls... I use the google phone app. Whenever I receive a call I cannot use the volume buttons to adjust volume; swithing between ear speaker and handsfree doesn't work; the proximity sensor doesn't work and if I turn off the screen manually with the power button, if I turn it on again the UI become buggy, often the screen stays black and sometime the phone shuts down by itself and goes to "qualcomm crash dump"... Can you please try if the calls are working correctly for you? Before blaming the rom I would like to ensure that isn't an app I have installed causing these issues
Click to expand...
Click to collapse
no issues here, perhaps install with the given procedure and let me kow then
after tht take logs
Excellent ROM, only issue I really have is that android 11 will no longer let me insecurely connect to the enterpise WIFI network at work. That is an issue for the IT guys at work....
escapee_skp said:
no issues here, perhaps install with the given procedure and let me kow then
after tht take logs
Click to expand...
Click to collapse
Nevermind, it was fault of a call recording app "skyvalex", it has a magisk module also. Now i uninstalled it and have no problem with calls
Great ROM, thanks dev.
Only concerns are widevine l1 not present and occasional heating of device.
Why is this thread closed?
Hi guys, can we expect any yaap support for guacamoleb ? It sounds so promising ! Best regards
Sjak Philipsen said:
Why is this thread closed?
Click to expand...
Click to collapse
yaap official team will post yaap updates for our device
escapee_skp said:
yaap official team will post yaap updates for our device
Click to expand...
Click to collapse
That's Great !!