DISCONTINUED DUE TO LOWER PERFORAMNCE THAN LEGACY!!!
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What are Nightly builds? Auto compiled builds of the latest CyanogenMod source from github. This version change each night and aren't officialy supported. If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).
All bug reports that don't meet this conditions will be ignored:
You have the kernel provided in the zip file
You made a clean flash and didn't restore anything
You made a detailed review of the problem
You provide a logcat in a .txt file (Search internet)
You provide dmesg or last_kmsg if it is a kernel panic (Search internet)
EVERY AND ALL REPORTS OF BUGS WITHOUT LOGS WILL BE IGNORED. DO NOT POST WITHOUT LOGS BECAUSE NOTHING WILL BE SOLVED. THANKS. I CAN'T DO WITCHCRAFT.
What's working :
Booting
RIL and Mobile Data (Should work for Dual-Sim also) !!! SOMEONE CONFIRM
Storages (Internal and External)
Notification Led
Flashlight
Sound
Wi-Fi
Bluetooth
GPS
Tethering (BT, Wi-Fi, USB)
Sensors
Camera
Browser
Autoselecting your phone based on your MODEM partition
BATTERYLIFE SHOULD BE CRAAAAZYYYY
What's not working :
Video playback
Fm Radio
NFC (I never used it and it is a pain to separate from other versions other than P710)
Other things might be broken please report with logs
Instructions :
Reboot to recovery
Make a full wipe (/system, /data, /cache, /dalvik-cache)
Flash the CM11 zip
Flash Gapps (if you want)
Make factory reset
Reboot to system
Downloads :
ROM:
Older versions:
cm-11-20160222-UNOFFICIAL-vee7-RC1.zip
md5: abe9b3aaa42a3e8dd6f9bdd96bdb02c3
cm-11-20160222-UNOFFICIAL-vee7-RC2.zip
md5: 5dafd54589f603b43780bee5a5d134da
GAPPS:
pa_gapps-modular-nano-4.4.4-20150308-signed.zip
If you really appreciate my work on the L7 II series please consider getting me a coffee right now
Credits :
@Caio99BR
chil360
Y300 Team
TeamHackLg
CyanogenMod
Xda for this nice home
Donators (BIG THANKS!!!) :
XDA:DevDB Information
CM11 vee7 CAF, ROM for the LG Optimus L7 II
Contributors
neutrondev
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CM
Version Information
Status: Stable
Created 2016-02-22
Last Updated 2016-02-22
Reserved
Changelog :
22.02.2016 ---> Initial Release RC1
You have the bugs and what is working in the first post
24.02.2016 ---> RC2
overclocked cpu
added governors
added hardware monitoring for battery
probably fixed dual sim
Reserved
Wow! This so fast. hahaha!
I have P716 and I will flash then as soon as I download it.
'll test and post the feedback. If you need some test of roms for dual sim devices you can ask me.
Anyway thank's for your efforts for our device.
In P716 boot is run( although the boot in this is slightly slower than the other ROMs, but ok), so start the device,
sim card's are detecded, but when i try enable then, an error occurs and activation failed, and return to mesage "new sim card detected....", then I was not able to activate neither one sim card.
So, return to the welcome page and after choose the language, a bar run, and aking "just a sec...", after few minutes, setup wizard crashes "Unfortunately, Setup Wizard has stoped". Device does not start.
I was trying reboot for sometimes, but every time the same occurs.
I read and follow all instructions and flash this rom two times.
As the device does not start, I was unable to get Catlog. Sorry.
Edit:
Now I tried to flash without GAPPS and it worked.
But, Setup Wizard not loaded. it probably crash. Before the first boot go directly to the Home screen. All configuration, wifi, data, time, language, ... was done manually.
Too, simcard's faliled to activated. included by terminal. I will provide the logcat soon. I'm sleepy now. hehe
After, I reboot to recovery and flash GAPPS now it worked. When rebooted playstore app not works in first time, after new rebooted, playstore app works but was slowly for now all ok.
The rest all ok for now. too videoplayback is ok.
What is CAF? How is it different from normal and your previous cm11 build.
XDA-00 said:
What is CAF? How is it different from normal and your previous cm11 build.
Click to expand...
Click to collapse
First search result in google: https://www.reddit.com/r/Android/comments/1rt9md/eli5_what_is_caf_why_is_cm_going_caf_affects_the/
shhnedo said:
First search result in google: https://www.reddit.com/r/Android/comments/1rt9md/eli5_what_is_caf_why_is_cm_going_caf_affects_the/
Click to expand...
Click to collapse
So Qualcomm devices(like my p715) will have increased performance/battery life with custom roms having CAF. Right?
XDA-00 said:
So Qualcomm devices(like my p715) will have increased performance/battery life with custom roms having CAF. Right?
Click to expand...
Click to collapse
Something along those lines, yes.
Sorry i don't understand one thing, to flash this rom, and Also your cm12-13, i have to use twrp3 or can I use my old cwm, the old no-touch version? Sorry for my bad english
MustangBR said:
In P716 boot is run( although the boot in this is slightly slower than the other ROMs, but ok), so start the device,
sim card's are detecded, but when i try enable then, an error occurs and activation failed, and return to mesage "new sim card detected....", then I was not able to activate neither one sim card.
So, return to the welcome page and after choose the language, a bar run, and aking "just a sec...", after few minutes, setup wizard crashes "Unfortunately, Setup Wizard has stoped". Device does not start.
I was trying reboot for sometimes, but every time the same occurs.
I read and follow all instructions and flash this rom two times.
As the device does not start, I was unable to get Catlog. Sorry.
Edit:
Now I tried to flash without GAPPS and it worked.
But, Setup Wizard not loaded. it probably crash. Before the first boot go directly to the Home screen. All configuration, wifi, data, time, language, ... was done manually.
Too, simcard's faliled to activated. included by terminal. I will provide the logcat soon. I'm sleepy now. hehe
After, I reboot to recovery and flash GAPPS now it worked. When rebooted playstore app not works in first time, after new rebooted, playstore app works but was slowly for now all ok.
The rest all ok for now. too videoplayback is ok.
Click to expand...
Click to collapse
I need dmesg and logcat and logcat -b radio. we will fix it
@MustangBR
Flash this in recovery then tell me if it works.
https://www.androidfilehost.com/?fid=24421527759886035
shhnedo said:
Something along those lines, yes.
Click to expand...
Click to collapse
Great!
Its strange for me TWRP 3x recovery writes during installation about "unable to mount system on block 14 and data on block 20 device is busy".Nothing wrong,just strange.
First bug just on first start,setup wizard "unfortunatelly stopped" after lang selection,with or without SIM and all.Maybe reason is i am flashing not provided gApps pack but just micro[dont need lots of junk in /system]. Logcat named xD is in attached RAR.May be You will see what went wrong,sir.
Flashed without gApps,first start is working well=) .BTW if i install that micro gApps after first start,evth is fine.
Then,about camera.While focusing camera app crushes,the same was on Weritos CM with his videorecording fix.Logcat named camera attached[not filtered by error type and thats why too large,sorry].
Gonna test and look now,what else can I see.
Okay,turned developer settings ON,setted all animations to 0.5x,seems all works well on my 713.
And a question,will ART work better than Dalvik?
neutrondev said:
I need dmesg and logcat and logcat -b radio. we will fix it
@MustangBR
Flash this in recovery then tell me if it works.
https://www.androidfilehost.com/?fid=24421527759886035
Click to expand...
Click to collapse
Log are attached.
I was not able to download RIL_DS.zip, tried several mirror, but will not download.
I'll try to download more times, so get flash it I reply here.
Edit:
I was able to download now and flash it.
Remain the same any sim can not be activated. New log's below
MustangBR said:
Log are attached.
I was not able to download RIL_DS.zip, tried several mirror, but will not download.
I'll try to download more times, so get flash it I reply here.
Edit:
I was able to download now and flash it.
Remain the same any sim can not be activated. New log's below
Click to expand...
Click to collapse
I will look into it. It seems there are some issues .
@MustangBR add this line to build.prop and restart
ro.telephony.ril_class=LGEQualcommUiccRIL
Okay,played a bit with ROM.
First,smth is with lockscreen when music is played.Pictures sometime stuck,and even with player off it sometimes freezes a bit while unlocking.
Second,few times stuck on main screen with music played,one time phone even rebooted itself,other times i pulled battery.
Then,as in another CM builds,maximum volume is ABNORMAL high.
Also,sometimes battery indicates strange.I was goin home with 9%,then raised to 14% and now 20%.
Will try to catch error about freezes in music/locker soon,probably tomorrow will send an logcat.
ART works good=)
And my opinion:This will be the best ROM for vee7.Holds battery great,and works great[i changed launcher to Nova for myself to have biggest grid in menu]
And can i ask to add Smartass Governor to kernel?
DS_katauri said:
Okay,played a bit with ROM.
First,smth is with lockscreen when music is played.Pictures sometime stuck,and even with player off it sometimes freezes a bit while unlocking.
Second,few times stuck on main screen with music played,one time phone even rebooted itself,other times i pulled battery.
Then,as in another CM builds,maximum volume is ABNORMAL high.
Also,sometimes battery indicates strange.I was goin home with 9%,then raised to 14% and now 20%.
Will try to catch error about freezes in music/locker soon,probably tomorrow will send an logcat.
ART works good=)
And my opinion:This will be the best ROM for vee7.Holds battery great,and works great[i changed launcher to Nova for myself to have biggest grid in menu]
Click to expand...
Click to collapse
Will add governors and Hardware monitor of battery sure.
neutrondev said:
I will look into it. It seems there are some issues .
@MustangBR add this line to build.prop and restart
ro.telephony.ril_class=LGEQualcommUiccRIL
Click to expand...
Click to collapse
No way.
Now when to open dialer app this is crashes. The same occurs when trying to configure and activate simcard in configurations he crashes.
Also now show only one sim card symbol on the top bar of the screen, before this command appeared two.
I confirm all @DS_katauri has written. I noted the same things. + sometimes after pressing the power button to block screen and press it again to unblock screem takes several seconds with black screen until to show the screen.
GPS(included navigation mode), camera, wifi, sensors, usb, sound,video, browsers are fine, batterylife is unbelievable, very good.
Not a ROM bug,i forget to use some autostarts manager and disable sync=)
Seems ROM is stable,no reboots for night.Just damn gApps.
@MustangBR
Try the new version. Clean flash. Tell me if Dual Sim works.
@DS_katauri
Overclocked CPU and governors are there.
Also battery is monitored with kernel interface now.
Related
Q&A for [ROM][SIRIUS][LP][5.0.2][SM-4.9] CyanogenMod 12 Unofficial [NIGHTLY BUILDS]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][SIRIUS][LP][5.0.2][SM-4.9] CyanogenMod 12 Unofficial [NIGHTLY BUILDS]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Google play and audiofx
The audiofx app doesn't appear to have any effect on the music playing from the google play music app. I've tried going into the audiofx app from within play music, but I just can't get it to work on play music. Not too sure whether audiofx has any affect on other apps other than the default music app. I'm on the latest build (20150111 V2)
Other than that, I can't find any problems. Great work!
no vibration
Hi! This is a great ROM!
Is there a option to activate Vibration?
Bluetooth audio fix by one click
At least for me with my car hi-fi (LAC7000) on the latest nightly dirty flashed over 12. Click Bluetooth, than the device connected for, the gear next to it. Uncheck the first and the third. Like the screenshot attached.
Recovery is not Ok. Lopping on boot.
I have flashed recovey like that
fastboot flash recovery openrecovery-twrp-2.8.3.0-sirius.img
After it, My ph is looping on logo. Pls fix bro.
greenhorn82 said:
Hi! This is a great ROM!
Is there a option to activate Vibration?
Click to expand...
Click to collapse
As in vibrate mode? Sure! Just keep pressing the volume down button when there's no media playing and you'll feel the phone switch to vibrate.
TheDefaultState said:
As in vibrate mode? Sure! Just keep pressing the volume down button when there's no media playing and you'll feel the phone switch to vibrate.
Click to expand...
Click to collapse
No, I mean sound and viration at the Same time.
greenhorn82 said:
No, I mean sound and viration at the Same time.
Click to expand...
Click to collapse
Media volume can be changed within the sound and notification settings in the settings and also when media is playing. There's also an option to also vibrate for calls in the sound and notification settings as well.
Thanks!
After closely watching the development for a month, yesterday I decided to flash it with some outdayed cwm based PhilZ Touch recovery. The install was not successful, and even broke the recovery :S This freaked me out a bit, but after successfully fastboot-flashing stock firmware and newest cwm, I tried again today. The result was the most butter smooth android lollipop experience! Thanks for this amazing rom
Recovery Doesn't work for me
Hi !
First thanks for your amazing rom Infected_ .
For me I have a problem with recovery , it doesn't work with CM12 Recovery ( I can't flash any zip files from my sd card), I must install CM11 recovery V6.0.5.1 which is working very well. When I want to update cm12, I must install CM11 recovery each time.
Do you have a solution for this?
Reboot doesn't works for me, only power off my phone.
Thanks a lot
Build 2015-01-14
Big thx to you infected for your amazing work. Keep it up !
build 2015-01-14 with included kernel
- bluetooth is seriously ****ed up (reboot, switching on/off doesn't help) (i hear something for a second or two then it stops)
- call keeps ending after a minute or so (without speaker phone, i didn't try speaker phone)
That's it
Lockscreen background
Maybe i`m blind, but is there a point to change the Lockscreen background ???
Upgrading to the 20150116 from 20150112v2 via a dirty flash caused it to fail to boot (stuck at the Sony logo). Required me to format System and clean install. Total pain in the ass cause I hadn't done a backup (I'm an idiot, complacency is gonna be my downfall).
Just a gentle reminder to do backups frequently when flashing nightlies!
Super stoked with the ROM, the camera quality is fantastic (better than stock I think - I rooted before you could backup your TA partition and I think my camera quality was never quite the same).
Solution?
I had the exact same problem with the kernel you use, only I managed to wipe both the rom and the recovery. After I flashed a stock fw and the newest cwm (http://forum.xda-developers.com/showthread.php?t=2702001) I could finally flash this rom.
Testing Results for latest version (nightly 1-16-15)
This build is in very good shape. Throughout my wanderings, I have noticed that only a few things that could be fixed (these might have already been recommended, but I am posting them anyways). First, the physical camera button does not work. I understand it is hard to build that button into a CM build, but I figured I would just write it down. I already know that someone has posted this recently, but I would just like to confirm. Another thing is that the double tap to wake feature in the display settings does not function. It can be selected, but the feature will not function, and sometimes the toggle undoes itself after a short period of time anyways. Although, it does not function even right after enabling the feature through the settings. I would also like to ask about charging. I believe CM does not support quick charging at this time, but I have noticed that it takes significantly longer to charge my device than stock rom. I have tried a variety of chargers, and I achieve the same result. I am just using standard 2.0-2.4 Amp chargers that my device has always used. I just have noticed that it takes a long time to charge (significantly longer than my OPO, but that thing charged faster than my Z2 in the first place). Last thing that I have noticed is very minor. On stock rom, the camera had an option for 16:9 15.5 MP shots that I frequently used since I do not really like 4:3 photos. I know the camera was a pain to get working in the first place, but this setting is not present anymore (in the included app and third-party apps). Anyways, these builds are really nice, much better than I expected for nightly revisions, so thank you!
DT2W works 20150118.
TWRP
Hi there,
first of all great work! The Rom ist just running fine on my device. The only problem seems to be the delay on calls.....but that's nothing to worry about^^. The other problem i have.....i flashed the twrp recovery several times. The twrp recovery does start....but only with the *.bat installer in windows. When i try to start it from the device it doesnt work. Instead, the cm12 recovery does start. Did i miss smth?
Greets form germany ;D
Got some problems with last build. Phone restarts after shutting down. Calls on Viber, Hangouts and Skype are broken. So I cant hear the other person. but he can hear me.
Su binary
cannot update my su binary..any suggestion?
Updating SuperSu
freshvibez77 said:
cannot update my su binary..any suggestion?
Click to expand...
Click to collapse
This is an issue, but you can update supersu by flashing the latest zip file here: download.chainfire.eu/supersu
I'm sorry for not posting a link, but XDA won't allow me to because of how new my account is. Just copy and paste that to get to Chainfire's SuperSu download page
Hello partners!!!
Here we share the functional rom last for our MaX2!
At the request of many colleagues, I created this CM13 based on 29 September.
And adding the entire S19 firmware to have it fully updated and upgraded.
Fully functional quick and steady myself I was surprised with the performance tests ... 143,000 AnTuTu with hot enough to test mobile Cold believe can draw record numbers ...
To say that I still have problems with slow motion ....
I'm starting to not know where mistakes can be ....
Libs I managed to trace the entire structure of the official EUI and still does not work ....
Permits revised from top to bottom ...
Libs mother and CM13 ... zilch ...
Perhaps there may be something in the kernel (boot) but there are limited ...
As I change anything to do directly test the ROM does not start or comes into infinite loops ....
So ... I leave the rom completely finished but with 2 bugs.
And each user knows what he wants or what you need.
But the ROM is fully functional for day to day and is really fast and stable.
BUGS:
1 Slowmotion nonfunctional. The rest of the camera is fully functional with 21mpxl.
2nd nonfunctional IRDA. (With this ... if not roms stocks moment ... little we can do ...)
The first!!!! IMPORTANT
We do not force anyone has use or install the rom.
We do not make yourself responsible for possible errors or brik the terminal.
We simply share our work for all so that we can have the terminal in our language.
RoM CM13
CM13 based official of the day 29/09/2016
s19 official firmware with all its libs + kernel.
Rom eliminated completely stock only apks that created conflict with our terminal.
Doze functional.
Sound perfect.
wiffi
BT
Integrated Pico gapps
Some improvements in the build.prop
Installation Method
We have created a zip FULL.
ROM contains firmware s19 + recovery + 5.8 everything necessary for you to come firmware do not have problems to come and stay all properly installed and running smoothly or silly scares.
* Download rom.
* Enter the zip rom on your terminal.
* Restart recovery.
* Since the recovery to the wipes.
* Once the wipes, select the zip and install.
* Once installation is complete, restart System.
* Wait for the rom you first start, it takes a few minutes not alarmed.
downloads TeaMSpaiN
CM13 ROM S19: https://mega.nz/#!SwIHSB7C!rFQJsQxx-J-RI121GWsaC6DAhDkLHzJdDPvdVabZRRY
Your comments on this rom.
And if you find any bug report to try to fix them.
Greetings comrades!
DONATE PAYPAL: https://www.paypal.me/ParasiteYgaseOso
thanks for sharing this
Sent from my Le X821 using XDA-Developers mobile app
Thank you! I will try this rom.
Changing action of the left hardware button doesnt work, it just keeps working as "menu" button.
ArctiX said:
Changing action of the left hardware button doesnt work, it just keeps working as "menu" button.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=68885350&postcount=235
meangreenie said:
http://forum.xda-developers.com/showpost.php?p=68885350&postcount=235
Click to expand...
Click to collapse
Thanks, that worked
Thanks for your work! Does Camera API 2 work this time?
I flashed this rom today. Everything works well for me!
wiped system and dirty flashed from previous cm13 and it seems to be running very well
Nice, smooth, we will see battery performance compared to Mokee.
- Camera2 api doesnt work
- Slowmotion doesnt work
- IR doesnt work
- For me, missing Aegis app from Mokee is a big step back
Sent from my Le X820 using Tapatalk
@ParasiTe_RemiX Did you build this from source or port from another device?
Beautiful ROM, but for me in Japan for some reason LTE is not working, I can get only HSPA. This is strange because in the stock eui I can use LTE no problem.
Also the hardware buttons light up when you touch the screen, on Eui they only lit up when you touched the buttons, not the screen.
Oh, and after checking now, the AudioFX doesn't work system wide, only in the cm music app, in e.g. YouTube or Tidal, it doesn't make any change in sound.
Notification light is blinking when charging, is there any way to make it always on and not blinking?
ArctiX said:
Also the hardware buttons light up when you touch the screen, on Eui they only lit up when you touched the buttons, not the screen.
Oh, and after checking now, the AudioFX doesn't work system wide, only in the cm music app, in e.g. YouTube or Tidal, it doesn't make any change in sound.
Notification light is blinking when charging, is there any way to make it always on and not blinking?
Click to expand...
Click to collapse
For the hardware buttons backlight, you can turn them off in settings/buttons or you can turn the brightness of them right down, via editing the max_brightness file.(can't remember the path name atm, but can easily google)
For the charging light, you can turn the charging light off in settings/display. The options for them don't seem to work unfortunately.
When I plugged my phone to the computer I noticed a blank file with no name and hard disk icon on my sd card, when I tried to delete it, it wiped my whole sd card! don't delete that file if you see it.
Hello, This ROM is also compatible with the version Le Max 2 Pro?
pickmod said:
Hello, This ROM is also compatible with the version Le Max 2 Pro?
Click to expand...
Click to collapse
No, you can't flash it for X620!
bahuy2003 said:
No, you can't flash it for X620!
Click to expand...
Click to collapse
I have Le Max 2 Pro X820... it is compatible?
Thank you, looks really production quality
This is extremely close to what I wanted from this device: Straighforward CM13 (ok, I'll want CM14 next), no bloat, functional and fast.
Also rooted, which means I control my device, not some vendor who wanted my money but fails to cede the control over what he sold.
And most importantly: No longer any of these Chinese apps, which refused to get uninstalled while they claimed about any privilege Android can provide.
I sure hope security patches will be coming for years as the device looks powerful enough to last a long time.
Only bug I've found so far is apps like Hangouts and Duo can't access the Camera for video calls. Apart from that, flawless so far.
LineageOS 14.1 for the Samsung Galaxy A3 2016
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Bugs and changelogs are in 2nd post !
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Installation
1. Download the ROM from the link below
2. Download GAPPS
3. Transfer the zip files to your SD card
4.. Reboot to recovery mode ( Vol UP + Home + Power )
5. Optional: Do nandroid backup
6. Wipe data / Factory Reset
Note: Needed if you are updating from other android version or stock
7. Install CM zip and GApps zip
8. Reboot to system
Enjoy!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Download
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Source
Check out the ROM Source available on Github.
Feel free to submit any fixes, Just remember to give proper credits when using other people's source.
Credits
LineageOS team
If i missed someone contact me!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
XDA:DevDB Information
LineageOS 14.1, ROM for the Samsung Galaxy A Series
Contributors
aapav01
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Testing
Created 2017-04-09
Last Updated 2017-04-16
Reserved
Bug LIST:
NOT KNOWN may have many bugs <not tested as i dont have the Device>
Downloads
Downloads
20170409 build 1 : removed getting a new build
20170416 build 2: Click Here
Report bug with LOGs only please !!
This....Doesn't boot whatsoever. Maybe remove the download link until you have a verifiably bootable build.
Yes not boot, it is blocked on boot logo.
Edit :
it Booted with edited ini.environ.rc
Sim card work, but not data
patrickjquinn said:
This....Doesn't boot whatsoever. Maybe remove the download link until you have a verifiably bootable build.
Click to expand...
Click to collapse
Really? Why not provide a log instead of being ungrateful that someone that don't even have this model are trying? How you suggest he will get it booted without help?
Grow up.
tys0n said:
Really? Why not provide a log instead of being ungrateful that someone that don't even have this model are trying? How you suggest he will get it booted without help?
Click to expand...
Click to collapse
You're really picking a bad day to come at me. Basically its hard to get a damn log when it failed to get past the bootloader. Also he stated that he doesnt have the device and therefore can not verify that it works at all. I simply made the suggestion that he remove the link until one of us can verify that it works otherwise you'll have a deluge of people installing this and soft bricking their phone followed by a million and one complaints.
What is it with XDA, its become worse than YouTube comment sections.
patrickjquinn said:
You're really picking a bad day to come at me. Basically its hard to get a damn log when it failed to get past the bootloader. Also he stated that he doesnt have the device and therefore can not verify that it works at all. I simply made the suggestion that he remove the link until one of us can verify that it works otherwise you'll have a deluge of people installing this and soft bricking their phone followed by a million and one complaints.
What is it with XDA, its become worse than YouTube comment sections.
Click to expand...
Click to collapse
You got a point to what you're saying. Maybe I missread the reason to why the link should be removed.
I'd say let the link be here. Don't attempt to flash if you don't know how to recover from a soft brick.
Anyway. I'll try to get some kernel logs when I get home, if I got the time.
I made a boot.img that boots and detects sim but no mobile data/text messaging etc.
Thanks for the port, but there is a wakelock bug
(sorry, i don't have logs)
Patched build with boot.img by Kqdi + small changes in ramdisk: https://drive.google.com/file/d/0B6vI9V6s4jvbRWhreWZUNkk1Sk0/view?usp=sharing
alexax66 said:
Patched build with boot.img by Kqdi + small changes in ramdisk: https://drive.google.com/file/d/0B6vI9V6s4jvbRWhreWZUNkk1Sk0/view?usp=sharing
Click to expand...
Click to collapse
what small changes
Kqdi said:
what small changes
Click to expand...
Click to collapse
- remove some stuff for supersu
- add support for swap (sswap) for better performance (we have 1,5 RAM only)
any solutions or ideas for fixing the problem with mobile internet/gprs ?
i dont want to be annoying, im just extremely curious
if i can help, msg me
i have no life, therefore i have always time to do stuff
richiM said:
any solutions or ideas for fixing the problem with mobile internet/gprs ?
i dont want to be annoying, im just extremely curious
if i can help, msg me
i have no life, therefore i have always time to do stuff
Click to expand...
Click to collapse
Send logs for help @aapav01 (locat and dmesg)
Use SysLog if you don't know how do it
Sorry I don't have logs. I tried the patched one real quick but unfortunatly I need my phone to be working for the moment.
I'd still like to share what I did try. Maybe someone else got more time to log it.
Sim card gets detected and APN is there. It finds my carrier, but can't get signal.
Bluetooth connected to computer, but failed on filetransfer. No crash, only defauld notification that transfer failed.
Wifi worked but I got very slow connection. (Could be any reason and may not be because of rom.)
ADB seems to work and also mtp.
Camera worked for pictures, but failed to connect to camera when I tried to record.
Phone can't wake up screen if it's been laying with screen off for some time.
That's about what I had time to try. Other than that it felt fluent, so thanks!
Here's my logs: https://drive.google.com/open?id=0B3Crq630YX4zNDVuUy1GMk02TkE
1) My dialer doesnt work, it freeeze when launching, but after the 3rd try, i skipped google setting in the beginning and it works.
2)No mobile network, only emergency calls for 1 sim and no sim for the second slot ( i tried mobile fix but it didn't changed anything)
3) Power off charging - freeeze and only hard reboot (vol down + power for 10 seconds helps)
4) camera - described above
5) Didn't have time to check phone wake up after sleeep, also the same with bluetooth
6) My wi-fi connection is ok
7) UI lagging
Hope it will help you a little
Vittario Vicci said:
Here's my logs: https://drive.google.com/open?id=0B3Crq630YX4zNDVuUy1GMk02TkE
1) My dialer doesnt work, it freeeze when launching, but after the 3rd try, i skipped google setting in the beginning and it works.
2)No mobile network, only emergency calls for 1 sim and no sim for the second slot ( i tried mobile fix but it didn't changed anything)
3) Power off charging - freeeze and only hard reboot (vol down + power for 10 seconds helps)
4) camera - described above
5) Didn't have time to check phone wake up after sleeep, also the same with bluetooth
6) My wi-fi connection is ok
7) UI lagging
Hope it will help you a little
Click to expand...
Click to collapse
This rom is for A310F/Y/M so no A310FD Thats why the 2nd sim isn't working
Kqdi said:
This rom is for A310F/Y/M so no A310FD Thats why the 2nd sim isn't working
Click to expand...
Click to collapse
My phone is A310F......
View attachment 4109028
Vittario Vicci said:
My phone is A310F......
View attachment 4109028
Click to expand...
Click to collapse
thats not a slot for a second sim, but one for a microSD
whats wrong with you lol
EUI 6.1 FINAL
6.1.712S_FKXOSOP617120407S
This is a stable release of the EUI 6.
Maximally close to the firmware, without any extraneous services and applications.
The main thing in this build:
- SMS Messenger from LeEco. Now fully work.
- The Contacts application is cured of an editing error
- Removed Google's analogs (sms, music, calendar)
- Build white (white bootanimation and splash screen)
- A compromise is found between performance and overheating
- more Russian
This build is the final release.
Installation is simple:
- maximum possible cleaning
- Installation via TWRP
- Magisk is put automatically
Reboot and configure.
The firmware is optimized within an hour.
Download links:
EUI 6.1.712S FINAL
- final release
GoogleDrive
EUI 6.0.617S ST2
- more bugfixes
is no longer available
EUI 6.0.617S RC3 ST
is no longer available
P.S. Who has a problem with the focus of the camera, this build also does not have its solution.
In build only 3 full languages:
English, Russian, Chinese
Important!
This is a fully saved port from the x850.
All EUI functional are presented in the form in which he got from the test build!
Only Fixed some issue.
It's RU build as the basis.
Working All and working fine.
The information below is part of the story. It is no longer relevant when installing and using the final release.
advantages of our build:
- we do not steal other people's works
- do not castrate the original system
- no blue diode
- there is Vulkan API
- correct and logical operation of the processor
- do not add strange software
- and we know how to do better without stealing
- and many many others!
EUI 6.0.617T port from X850
Installation:
Download the zip(s)
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash ROM
Install Magisk (if you need)
Reboot
Attention!!!
After first install, please be patient!
When you see screen with Language choise, turn off screen and wait 3-5 min. After, you may to continue settings!
Otherwise, the device may reboot during the setup process.
In build only 3 full languages:
English, Russian, Chinese
Now LeEco servers didn't work, but you may skip enter in you Account during Setup Wizard.
In this build work FP and most functions EUI, but online LeEco services didn't work (may be now, may be forever).
Important warnings for use:
//Never turn on this function!//
Otherwise, you will receive a reboot of the device instead of an incoming call. (this bug from x850)
//This function didn't work too//
When you turn on nothing will not happen, but the battery consumption will increase slightly
//After any reboot, wait up to 2-3 minutes. This will help avoid rebooting again.//
Tips and Tricks in second post later
Download:
- is no longer available
Contributors:
prsapphire
Kirich_Kumchenko
and LeEco
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based On: EUI 6
Version Information
Status: Final
Created 2018-01-05
Last Updated 2018-07-13
Already normally did not eat and did not sleep more than a month. Would you like to support my work, it would be nice. :laugh:
Not needed!!!
* Dolby Atmos work only with Magisk
If you want it, install this module:
download
*In build including Vulkan API drivers
cool thanks for your work
Everything is working? Thanks!
F*** yeah I have tried Eui 6.0 on Le Max 2 and it's great. Excellent thanks I'll try this out.
K got past setup but rebooted like 6 times. Now I'm in system keeps rebooting randomly
allrockedout said:
K got past setup but rebooted like 6 times. Now I'm in system keeps rebooting randomly
Click to expand...
Click to collapse
Read first post, if you do how in recommendation, your problems did not occur
Attention!!!
After first install, please be patient!
When you see screen with Language choise, turn off screen and wait 3-5 min. After, you may to continue settings!
Otherwise, the device may reboot during the setup process.
Click to expand...
Click to collapse
prsapphire said:
Read first post, if you do how in recommendation, your problems did not occur
Click to expand...
Click to collapse
Yes I read it. I'm in system now will do more testing thanks
OK not rebooting anymore also dialed *#46350000#*#* and turned everything off. Pretty stable restoring some apps now. More testing
allrockedout said:
OK not rebooting anymore also dialed *#46350000#*#* and turned everything off. Pretty stable restoring some apps now. More testing
Click to expand...
Click to collapse
Not needed now! It's work correctly with CPU and LMK! ONLY Scene you may turn off.
Stability in system after one - two hours, then the first logs and update some sys app in background.
prsapphire said:
Not needed now! It's work correctly with CPU and LMK! ONLY Scene you may turn off.
Stability in system after one - two hours, then the first logs and update some sys app in background.
Click to expand...
Click to collapse
Camera, Focus, Sencors, batery gyroscop any info? what about tranlations? could you share untranslated eng files so comunity could help?
kihope12 said:
Camera, Focus, Sencors, batery gyroscop any info? what about tranlations? could you share untranslated eng files so comunity could help?
Click to expand...
Click to collapse
Read the post, all inside.
About other lng, I didn't plan added more.
prsapphire said:
Read the post, all inside.
About other lng, I didn't plan added more.
Click to expand...
Click to collapse
But i cant found any info about working non working things, only about FP
Does everything work on it ?
I will give a try and give you feedback.
3 dot in circle notification is back again. Any way to trick the system to show the correct icon of the app that sends the notification?
Rear Camera doesn't work, fingerprints works but slow, lag fixed, battery is bad, 50% to 5% in 4hours without turning screen on.
Anw thank devs very much.
does it lag like the previous eui 6 rom?
If you are on eui 6 alpha, you needn't wipe anything before rom installation
Devanshu Biswas said:
does it lag like the previous eui 6 rom?
Click to expand...
Click to collapse
Lag fixed
Everything is working?
roushankumarsharma said:
Everything is working?
Click to expand...
Click to collapse
Reading is the Secret instead of asking the same question multiple times. [email protected]
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community
Requirements:
- oreo bootloader
- twrp 3.2.0+
- backup everything before install
- wipe data before upgrading from LineageOS 14.1 or stock rom
Install:
- Flash zip in TWRP
- Don't forget about gapps (arm64 8.1)
- Root not included. Flash magisk before first start.
Google apps should be installed via recovery immediately after installing ROM.
If you reboot into ROM before installing Google apps, you must factory reset and then install them, otherwise expect crashes.
Not working:
gps
bt audio
stuff, I haven't checked
I broke my tablet. There are no more updates here further.
Download:
T820: https://drive.google.com/open?id=1ql4VIjTsSHNwzsoJm3Yb8wt0RW9OJerE
Device initial config sources:
https://github.com/bonuzzz
I was about to sell tablet...and get pixil c. Tablet is extremely laggy on stock Oreo. Switched back to your lineage 14.1 build which runs well but realized it was no longer supported. Very happy with your work! Thanks!
I'll give it a go when I get home. Thanks for supporting our device!
I did switch off WiFi upon initial setup, didn't seem to be liking 5g. After setup I switched to 5g WiFi but it kept showing no internet. My other devices don't have this problem. Not a big deal, just giving a heads up. I switched to 2g WiFi and all is well. Wayyyy smoother than stock Oreo. Didn't test gps, I know you said it wasn't working. I don't use GPS on my tablet so no loss there. Thanks again!
For gapps it shows "arm 8.1" it should be "arm64 8.1"
Edit: 5g seems to be working fine after a resetting WiFi, mobile & Bluetooth. Still can't seem to get audio playing through Bluetooth even though it's connected.
Cool! I will be installing this shortly. I was going to switch the the tweaked stock Oreo but will much rather use Lineage since I prefer more of a "vanilla Android" over Samsung's version.
P.S. I recently got myself a pixelbook for chromeos+android+linux and I find myself using that way more than my tab s3. If you need anyone to test something that doesn't really care about stability, let me know!
Edit:
Just wanted to let people know of what I've initially noticed and tested.
* Not laggy like stock is
* Able to format sd card for internal storage
* Official Keyboard case works (didn't use much before)
- show/hide key for virtual keyboard and Lang key don't do anything (at least it appears that way)
- Left 'alt' brings up emoji, right 'alt' brings up symbols on virtual keyboard.
* Auto wake/sleep works with 3rd party case (assume all work since it's just a magnet)
* Auto brightness works but I tested it with a flash light.
I liked the 14.1 version and I seem to like this version as well. It is to early to say more, but why can't you share this with lineage? It would be a dream, if this would be official and we would recieve updates. And maybe they will help you with the missing GPS?
Thanks so much for this. I've been wanting to get an Oreo ROM like this for my S3
EDIT: Is there any chance you could just give a dump of your terminal session of the build? I had started to try & build 15.1 for the S3 WiFi, based on your work for the LTE version, but wasn't having any luck. I'm hoping that if you could provide a terminal dump, it could help me work through my issues to get the build working as well. Would appreciate it =]
Regardless, thanks for taking the time to build this for us WiFi owners! =D
Finally, T820! Have been waiting for this for months now. Gonna give this ROM a try ASAP :laugh:
Thank you so much for this! Testing this weekend.
PuDLeZ said:
Just wanted to let people know of what I've initially noticed and tested.
* Not laggy like stock is
* Able to format sd card for internal storage
* Official Keyboard case works (didn't use much before)
- show/hide key for virtual keyboard and Lang key don't do anything (at least it appears that way)
- Left 'alt' brings up emoji, right 'alt' brings up symbols on virtual keyboard.
* Auto wake/sleep works with 3rd party case (assume all work since it's just a magnet)
* Auto brightness works but I tested it with a flash light.
Click to expand...
Click to collapse
Did you test the spen by any chance?
VVombat said:
Thank you so much for this! Testing this weekend.
Did you test the spen by any chance?
Click to expand...
Click to collapse
I didn't have software installed that I could use it in but I did put it to the home screen and got the circle indicator of where the tip is so it registers. Of course, there was no Samsung menu... Anything specific you want me to try this evening?
PuDLeZ said:
I didn't have software installed that I could use it in but I did put it to the home screen and got the circle indicator of where the tip is so it registers. Of course, there was no Samsung menu... Anything specific you want me to try this evening?
Click to expand...
Click to collapse
Mhm I'm using mainly Squid and Xodo to annotate and notate stuff. If you have them laying around anyways that would be nice, but if not no need to install and waste your time if I'll install tomorrow anyways. Thank you for your answer!
lineage-15.1-20180614-UNOFFICIAL-gts3lwifi doesn't work for me, bootloops, tried almost everything, etc.
RESOLVED: See below how and why.
Good afternoon. Everything works fine, the stylus in all orientations, the AnTuTu test runs fine and there is no understating of indicators on both stock, Wi-Fi is excellent, both 2.4 GHz and 5 GHz.
There are only 2 inconveniences
- Stereo sound from speakers is only in portrait orientation, and landscape channels do not change. Can you make a patch or fix yourself, you can not even change the channels when you turn, but only make a stereo Sound in landscape orientation (videos and movies often look into it);
- No sound goes to the Bluetooth headphones.
In any case, the firmware is super, thank you very much for the work done.
Hello, how to get Bluetooth working? I connect but no sound
Thank you also
Another problem, the sound slows down and stutters in applications (heavy or simple games)
JWnSC said:
For gapps it shows "arm 8.1" it should be "arm64 8.1"
Edit: 5g seems to be working fine after a resetting WiFi, mobile & Bluetooth. Still can't seem to get audio playing through Bluetooth even though it's connected.
Click to expand...
Click to collapse
edited, thanks
yes, bt audio doesn't work. seems I broke it in last moment...
PuDLeZ said:
Just wanted to let people know of what I've initially noticed and tested.
* Not laggy like stock is
* Able to format sd card for internal storage
* Official Keyboard case works (didn't use much before)
- show/hide key for virtual keyboard and Lang key don't do anything (at least it appears that way)
- Left 'alt' brings up emoji, right 'alt' brings up symbols on virtual keyboard.
* Auto wake/sleep works with 3rd party case (assume all work since it's just a magnet)
* Auto brightness works but I tested it with a flash light.
Click to expand...
Click to collapse
I have official keyboard case too. Unfortunately it's almost unusable in aosp if you need more than one keylayout. What about special keys, aosp doesn't have that triggers what stock rom has. I only could advice 3rd party app, but paid https://forum.xda-developers.com/showthread.php?t=1541916
HardWorker79 said:
I liked the 14.1 version and I seem to like this version as well. It is to early to say more, but why can't you share this with lineage? It would be a dream, if this would be official and we would recieve updates. And maybe they will help you with the missing GPS?
Click to expand...
Click to collapse
Nothing will change with official status except It would create more troubles and bureaucracy there.
Nobody will help. Believe me.
Comses said:
Good afternoon. Everything works fine, the stylus in all orientations, the AnTuTu test runs fine and there is no understating of indicators on both stock, Wi-Fi is excellent, both 2.4 GHz and 5 GHz.
There are only 2 inconveniences
- Stereo sound from speakers is only in portrait orientation, and landscape channels do not change. Can you make a patch or fix yourself, you can not even change the channels when you turn, but only make a stereo Sound in landscape orientation (videos and movies often look into it);
- No sound goes to the Bluetooth headphones.
In any case, the firmware is super, thank you very much for the work done.
Click to expand...
Click to collapse
I have an issue somewhere in audio behavior. Will check it deeper.
Comses said:
Another problem, the sound slows down and stutters in applications (heavy or simple games)
Click to expand...
Click to collapse
in games only? I've not noticed anything in videos.
samsuffit said:
Doesn't work for me.
What I did from Lineage 14.1:
- Upgraded TWRP to v3.2.1.1
- Wiped eveything
- Downloaded BRE2 firmware for my country
- Extracted BL....tar.md5 and flashed it with Odin v3.13.1
- Rebooted in recovery mode to be sure of... still don't know what
- Flashed Lineage 15.1
Then I could see the logo animation until the end, just before the system starts, then 3 boot loops and it went to recovery mode
I repeated the exact same sequence and flashed SuperSU v2.82-SR5, same result.
So...:
- Wipe everything
- Flash BL, CSC and CSC_HOME (no need of AP, system partition) with Odin
- Format/Erase Data
- Flash Lineage 15.1
Again a boot loop, this time without going back automaticaly to recovery mode.
Tried with SuperSU, boot loop...
So... This time I flashed eveything, reboot with Samsung Android, test a little bit, then:
- Flash TWRP v3.2.1.1
- Immediatly reboot to recovery mode
- Format/Erase Data
- Wipe everything
- Flash Lineage 15.1
Boot loop...
Tried with SuperSU, boot loop...
I was able to restore a full backup of my previous Lineage 14.1 installation.
What did I do wrong and which kind of logs do you need to help me to understand?
Thank you and thank you to have integrated S-Pen support, I love this thing. I don't realy need GPS.
Edit: in case it was mandatory I tried with Magisk v16.0 and v16.4 instead of SuperSU. Same boot loop.
If it's because I didn't flash the GAPPS, well... nevermind... I'll wait for something else.
Click to expand...
Click to collapse
Magisk is needed for device certification in Play store. That's because it should be flashed with gapps before first boot. So, rom works without gapps and root well.
For what region you downloaded oreo stock rom? I doubt but maybe samsung has different logic in bootloader for relocatable kernel stuff. It's strange how you restored lineage nougat, because that kernel shouldn't work with oreo bootloader.
edit: i'm wrong about bootloader and nougat, because I use now old twrp with nougat kernel.
Flashed old build. Have audio in bt, but don't have speaker rotation. I was sure it worked before...
If someone used or uses lineageos 14.1, is speaker rotation work there or not?
Hello @bonuzzz, thank you for the reply.
I was able to restore my Lineage 14.1 because I flashed the ARA2 boot loader (tried with Odin the first time, then with my TWRP backup, same result)
bonuzzz said:
If someone used or uses lineageos 14.1, is speaker rotation work there or not?
Click to expand...
Click to collapse
Only with VLC. Stuck in portrait mode with stock player. I don't have any games...
The last thing I need to try is installing the GAPPS... Like I said, I don't want to, so if the problem comes from this, I'll pass. But I have to try to be sure...
In this order from TWRP:
- Flash BRE2 boot loader
- Format Data and wipe everything
- Flash Lineage 15.1
- Flash openGAPPS nano arm64 8.1
- Flash Magisk 16.4
And... It's working...
Well...
I want to cry...
So the GAPPS are mandatory.
Thank you for creating a new os for sm-t820.
BT audio is working for me with Sony mdr zx220bt headphones