{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This kernel is made for the Moto X Style/Pure (xt1575). I have not tested it on the xt1572. If you would like to test it be my guest. This kernel was based off the wok done by AICP and Hashbang173 . I wanted to bring the custom kernel features into a cm based environment. The features brought over were originally done for a stock kernel setting by dirtyhank and his Frankenclark kernel. I have optimized the settings to work with BlissRom. My goal is to provide better battery life surrounded by a stable experience. I will add more features as I go... I planned to just make this the default kernel on BlissRom, but with the overall lack of development for this device and the overwhelming support I got for it. I have decided to offer it as a standalone download as well.
WARNING
I have tested this kernel....With that said. I DO NOT hold any responsibility for what you may do to your device with this product. Also make a proper backup before flashing.
Features of the Kernel
Kernel Version 3.10.95
color control (Kcal)
Underclocking (302mhz)
KSM & UKSM
Voltage readings
Fsync option (on/off)
Touchboost option (on/off)
MultiRom Support
DoubleTap2Wake/Sweet2Wake
Added Govs - ElementalX, Intelliactive, Lionheart, BioShock, BluActive, Wheatley, InteractiveX & Interactive
Bricked Hotplug
Added I/O schedulers (SIO, FIOPS & Zen)
And much more...
To Install
Be on a custom rom (also test with cm base so far)
Download ZIP
Reboot to Recovery (I have only tested on TWRP 3.0)
Flash
Wipe Cache
Reboot
ENOY
Downlad PureBliss Kernel
I currently use Kernel Adiutor for my kernel settings. It had also been tested and works with EX Kernel Manager
Credits for all the HARD work
vadimtk
flar2
franciscofranco
nimrodsv
anarkia1976
savoca
myfluxi
AudioGod
osm0sis
nychitman1
jollaman999
imoseyon
showp1984
HashBang173
dirtyhank
XDA:DevDB Information
[KERNEL][MM 6.0] PureBliss Kernel, Kernel for the Moto X Style (Pure)
Contributors
pjgraber03
Source Code: https://github.com/BlissRoms-Kernels/kernel_motorola_msm8992
Kernel Special Features:
Version Information
Status: Testing
Created 2016-02-24
Last Updated 2016-03-07
Good Job! And thank you!
Sent from my XT1575 using Tapatalk
Sheetzie03 said:
Good Job! And thank you!
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
Thanks more to come
Tried on RR 5.6.4 and don't have access to internal storage and sdcard on any file manager i.e. /sdcard, /mnt/sdcard and any other dirs/symlinks at /mnt are empty. Will try now on BlissRom.
But perfomance is awesome compared to stock RR kernel.
demon65 said:
Tried on RR 5.6.4 and don't have access to internal storage and sdcard on any file manager i.e. /sdcard, /mnt/sdcard and any other dirs/symlinks at /mnt are empty. Will try now on BlissRom.
But perfomance is awesome compared to stock RR kernel.
Click to expand...
Click to collapse
Yes, you are righr, same here.
pjgraber03 said:
Thanks more to come
Click to expand...
Click to collapse
Can you please explain the difference between BlissPure kernel and PureBliss kernel(if there is any?)...I've looked around and am still confused. I've downloaded them both and they're the same size just named differently. Either way i've flashed one of them over the maintenance build of Bliss ROM and its running smooth and I'm getting great battery life for first cycle
I think it has just been renamed to roll of the tongue more. I actually suggested it to him lol, as it makes more sense in english to call is pure bliss, than bliss pure. Sorry if my suggestion caused any confusion, that was not my intention. It's a great kernel!
No new posts in a while. Usually kernel threads have tons of posts and questions. Eerily quiet.
Sent from my XT1575 using Tapatalk
humor2008 said:
Yes, you are righr, same here.
Click to expand...
Click to collapse
Same here... I she the same problem using @hashbang1117's kernal from his latest aicp build (i took the unofficial build and flashed the boot.img in the zip.) and i was unable to access the SD card. I assume this is based off of the kernal made by @HashBang117
Sent from my XT1575 using XDA Labs
HikingMoose said:
No new posts in a while. Usually kernel threads have tons of posts and questions. Eerily quiet.
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
The OP is confusing people with nearly duplicate threads:
http://forum.xda-developers.com/moto-x-style/development/blisspure-kernel-t3321663/post65569748
What is the difference???
gpz1100 said:
The OP is confusing people with nearly duplicate threads:
http://forum.xda-developers.com/moto-x-style/development/blisspure-kernel-t3321663/post65569748
What is the difference???
Click to expand...
Click to collapse
It's been discussed in most of them. It was an accident. Everyone is aware of it (well we thought everyone was). If people stop commenting on the other ones, they'd go away.
Sent from my XT1575 using Tapatalk
WelcomeToTheSkye said:
Same here... I she the same problem using @hashbang1117's kernal from his latest aicp build (i took the unofficial build and flashed the boot.img in the zip.) and i was unable to access the SD card. I assume this is based off of the kernal made by @HashBang117
Sent from my XT1575 using XDA Labs
Click to expand...
Click to collapse
Well the kernel was based off aicps' kernel yes....But is WAS not an identical match....he has since incorporated the changes in from this kernel into theirs....
pjgraber03 said:
Well the kernel was based off aicps' kernel yes....But is WAS not an identical match....he has since incorporated the changes in from this kernel into theirs....
Click to expand...
Click to collapse
I did say based off of... All I was saying was you and hashbangs kernal both have the same sd card issue
Sent from my XT1575 using XDA Labs
WelcomeToTheSkye said:
I did say based off of... All I was saying was you and hashbangs kernal both have the same sd card issue
Sent from my XT1575 using XDA Labs
Click to expand...
Click to collapse
what sd card issue? I use my sd card without any problems
pjgraber03 said:
what sd card issue? I use my sd card without any problems
Click to expand...
Click to collapse
It's on Resurrection Remix. Use any custom kernels on that ROM and normal user loses access to internal and external sdcards.
Seemed like a permissions problem. Built-in file manager and Gallery could no longer see files, but Root Browser was ok using this kernel on RR. Sorry, I didn't troubleshoot it more thoroughly than that or get any logs.
updated posted http://downloads.blissroms.com/Bliss/Official/clark/kernel/PureBliss_Kernel_v.1.1.zip
Thanks. Working fine with CM13 build too.
Running with cm13 build, so far, I am not experiencing delays, phone seems faster,
overnight drain is normal. Haven't had screen on delay when pressing power button yet.
So far, not bad. I'm using Elementalx kernel manager and I don't see any hotplug settings, CPUs hover at 302 most of the time, no deep sleep on any of them. Anyone else have that, or just me? Using the most recent zip with Temasek.
Edit:
Moved to Kernel Adiutor and hotplug is there. Moving on, thank you much!
I am just wondering if dt2w is actually working? I thought I read somewhere that it breaks something but for life of me can't remember
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Only for CM 13.0-based ROMs!
Downloads:
https://www.androidfilehost.com/?w=files&flid=51727
Supporting my work:
To motivate me and keep me going, simply click the 'thanks' button.
XDA:DevDB Information
zwliew Kernel, Kernel for the Moto X
Contributors
zwliew
Source Code: https://github.com/zwliew
Kernel Special Features: Smooth performance? Check. Solid battery life? Check. Customization options? Check. Enjoy.
Version Information
Status: Stable
Current Stable Version: r13
Stable Release Date: 2016-03-10
Created 2014-11-02
Last Updated 2016-03-10
Changelogs:
r13
Fixed several kernel vulnerabilities
Fixed several cpufreq issues - most notably the bug whereby CPU1 is stuck on 1.5 GHz (patch awaiting approval from CM)
Fixed a whole ton of deadlocks and issues in the scheduler subsystem, potentially improving performance and power
Fixed many issues in several kernel subsystems (including patches from CAF and Linux-stable)
Increased IO performance
Reduced boot times (patch partially merged by CM)
Enabled and optimised a kernel option that allows the CPUs to go to idle states faster, improving power consumption
Merged a series of patches that simplify the hotplug architecture greatly, improving power consumption
Many other misc. improvements and fixes - check out the GitHub!
Features coming soon:
FauxSound (or a similar sound control driver)
Color calibration
The kernel is pre-tweaked for a nice balance between smooth, buttery performance, and solid battery life.
If the expert in you absolutely wants to customise some more, stay tuned for further documentation!
I guess you have provided a wrong kernel in your directory. I think the one you have provided is for Samsung Ace 2. Plz look into it. Really would like to try your kernel.
Downloaded the file zwliew-kernel-r1.zip
Got error in recovery. After checking updater script, it appears something is wrong
Booted with Krypton Rom 1.4.1
Need feedback and I install ?
Sent from my XT1052 using XDA Free mobile app
athulele said:
Downloaded the file zwliew-kernel-r1.zip
Got error in recovery. After checking updater script, it appears something is wrong
Click to expand...
Click to collapse
What error is it? I'll take a look soon.It seems fine to me.
DaRkRhiNe said:
I guess you have provided a wrong kernel in your directory. I think the one you have provided is for Samsung Ace 2. Plz look into it. Really would like to try your kernel.
Click to expand...
Click to collapse
I've updated the links, go check it out.
Good work friend.... Impossible flash in XT1052 with TWRP.....
isaakmg said:
Good work friend.... Impossible flash in XT1052 with TWRP.....
Click to expand...
Click to collapse
Sorry guys! I screwed up big time! The links were all garbled
Now they work fine.
zwliew said:
Sorry guys! I screwed up big time! The links were all garbled
Now they work fine.
Click to expand...
Click to collapse
Booted fine here with latest fix, everything working so far. Krypton 1.4.1 xt1060
boots fine with epsilon 3.1. Will report if I find any bugs
isaakmg said:
Good work friend.... Impossible flash in XT1052 with TWRP.....
Click to expand...
Click to collapse
That's what happened to me.
XT1060 TWRP 2.8.1.0 Krypton 1.4.1
isaakmg said:
Good work friend.... Impossible flash in XT1052 with TWRP.....
Click to expand...
Click to collapse
rebretz000 said:
That's what happened to me.
XT1060 TWRP 2.8.1.0 Krypton 1.4.1
Click to expand...
Click to collapse
I've updated the download links a little while ago. Are you sure you're flashing the file "zwliew_ghost_r1.zip"? That is the kernel.
Running on XT1053 4.4.4 Generic GSM FXZ.
Flashed with TWRP 2.8.1
Sent from my XT1053 using XDA Free mobile app
kenosis said:
Running on XT1053 4.4.4 Generic GSM FXZ.
Flashed with TWRP 2.8.1
Sent from my XT1053 using XDA Free mobile app
Click to expand...
Click to collapse
Any question Work in stock rom 4.4.4 sprint rom whit root and recovery brot ????
makysssdroid said:
Any question Work in stock rom 4.4.4 sprint rom whit root and recovery brot ????
Click to expand...
Click to collapse
It works
Ok I am confused why are the build dates of all the files JULY but the commits are as new as 10 hours ago?
Anyone seen any performance improvements or other user noticeable improvements over lets say faux or krypton? Just curious looks like way more activity on this kernel
adm1jtg said:
Ok I am confused why are the build dates of all the files JULY but the commits are as new as 10 hours ago?
Anyone seen any performance improvements or other user noticeable improvements over lets say faux or krypton? Just curious looks like way more activity on this kernel
Click to expand...
Click to collapse
Last and final fix to the links in OP. The downloads are in XDA DevDB downloads section.
http://forum.xda-developers.com/devdb/project/?id=6479#downloads
I messed up the links when copying over from my old XDA thread for another device.
Work on stock rom or CM rom only ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SOURCE | CREDITS | DISCLAIMER | DOWNLOADS | FEATURES | FAQ
**Snapdragon™ is a registered trademark owned by Qualcomm Technologies Inc.
**Synapse™ is a registered trademark owned by @Andreilux
**(v1)Xceed Logo™ is created by @fareed_extreme
**(v2)Xceed Logo™ is created by @Sharan Narayan
**(v3)Xceed Logo™ is created by @JeGuina
XDA:DevDB Information
Xceed Custom Kernel, Kernel for the LG G3
Contributors
kairi_zeroblade
Source Code: https://github.com/zeroblade1984/Galbi
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: Production build 2
Stable Release Date: 2016-04-10
Created 2015-10-10
Last Updated 2016-12-07
wow amazing
am gonna try it.looks amazing.hope there is kcal and yankactive governer as i find this hoverner the best balanced between performance battery and temperature.kcal for tuning the screen as u know lg g3s screen calibration not so good.other all stock or little modded is fine.
Kernel LG G3
What up bro,
My names is Gregory I from Brazil
The kernel is to stock or aosp ?
Link download ?
Regards
Gregorypac said:
What up bro,
My names is Gregory I from Brazil
The kernel is to stock or aosp ?
Link download ?
Regards
Click to expand...
Click to collapse
stock: https://github.com/zeroblade1984/Galbi/wiki/Features
Gregorypac said:
What up bro,
My names is Gregory I from Brazil
The kernel is to stock or aosp ?
Link download ?
Regards
Click to expand...
Click to collapse
Where it says features and downloads.
Is there any reason why to use Synapse? features / settings wich only can handeld with synapse ? I prefere Kernel Adiutor...
Your kernel is super fine on G2. Glad you make kernel for G3. Your kernel on Marshmallow would be awesome.
Sent from my LG-D855 using Tapatalk
Happy to see a new dev for the G3!
Thanks for your work!
Envoyé de mon LG-D855 en utilisant Tapatalk
Can't wait to try this one!
Sent from my LG-D855 using XDA Free mobile app
For aosp or stock roms guys?
STOCK...
@Smittels Look at AH. Greets Chojin
Will you ever build your kernel for Canadian and American models?
Hi there and thanks
Ext-Card is not mounting for me. Running Cloudy Rom.
Coming from Navel, I Installed Xceed running Cloudy G3 2.5 (20P stock based ROM). Booted flawlessly without problems.. It is a pure stock kernel with minor modifications like OC which is stuck on the 2649 MHz clock speed! Couldn't lower the set OC frequency.. Performance is great due to the OC. Standard Governors, Schedulers and MP decision Hotplug.. Kcal support is there.. No UV support.. Battery life too early to judge.. Hope there are some Kernel and build.prop tweaks embedded..
Good work but more options could really add up to the value of this kernel.. And please fix the OC issue.. I use Kernel Auditor by the way.. Will update about any issues or problems later if any, but so far phone is ultra stable..
Thanks mate
P.S. External card mounted and working good.
Sent from my LG G3-D55 using Tapatalk, running Cloudy 3G V2.5 Powered by Xceed Production Build 1
jokerpappu said:
am gonna try it.looks amazing.hope there is kcal and yankactive governer as i find this hoverner the best balanced between performance battery and temperature.kcal for tuning the screen as u know lg g3s screen calibration not so good.other all stock or little modded is fine.
Click to expand...
Click to collapse
The sharpening fix is already included..I'll add Savoca's sharpening mod also..
theoverfiend said:
Is there any reason why to use Synapse? features / settings wich only can handeld with synapse ? I prefere Kernel Adiutor...
Click to expand...
Click to collapse
Its because only stuff I added to Synapse are the only ones important to fiddle with..other options are needless of any attention since they are auto-magically managed..
qu3becker said:
Will you ever build your kernel for Canadian and American models?
Click to expand...
Click to collapse
I can just hit me up with a stock bumped boot.img and also I need you on my crew as a tester..
Saratoga79 said:
Hi there and thanks
Ext-Card is not mounting for me. Running Cloudy Rom.
Click to expand...
Click to collapse
if your External SD card is on EX-Fat file system it really won't be mounted..I'll add that for the next build for both G2 and G3..
tghandour said:
Coming from Navel, I Installed Xceed running Cloudy G3 2.5 (20P stock based ROM). Booted flawlessly without problems.. It is a pure stock kernel with minor modifications like OC which is stuck on the 2649 MHz clock speed! Couldn't lower the set OC frequency.. Performance is great due to the OC. Standard Governors, Schedulers and MP decision Hotplug.. Kcal support is there.. No UV support.. Battery life too early to judge.. Hope there are some Kernel and build.prop tweaks embedded..
Good work but more options could really add up to the value of this kernel.. And please fix the OC issue.. I use Kernel Auditor by the way.. Will update about any issues or problems later if any, but so far phone is ultra stable..
Thanks mate
P.S. External card mounted and working good.
Sent from my LG G3-D55 using Tapatalk, running Cloudy 3G V2.5 Powered by Xceed Production Build 1
Click to expand...
Click to collapse
Use only Synapse..the option to lower frequencies sticks there..also on my kernel you do not need to underclock..the Ondemand is intelligent enough to choose what frequencies to use on a given situation..for low load/simple tasks it won't even go above 2ghz..my kernel performs out of the box..it does not need attention, so you can enjoy your phones to the fullest..you can read reviews on my G2 kernel thread..
You guys are in for a huge treat with this kernel kairi is a kernel wizard!
thanks for the kernel.after the gabriel kernel not being supported i thought it was the end for kernel for us bt u saved us and gave us a great kernel.thank u for the kernel dude.
just used the kernel and its performance is buttery smooth even with interactive governer.havent checked the battery lifr coz ext card not aupported so i just checked the performance and reverted back.will use this kernel when ext card support and kcal is added.thank you alot.
jokerpappu said:
just used the kernel and its performance is buttery smooth even with interactive governer.havent checked the battery lifr coz ext card not aupported so i just checked the performance and reverted back.will use this kernel when ext card support and kcal is added.thank you alot.
Click to expand...
Click to collapse
My SD Card is mounting..its on NTFS though..KCAL is supported..USE SYNAPSE(for God's sake read read read!!)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is my custom kernel that I've been using personally since the Nexus 9 was released. I have started updating it more frequently, and it has some unique features that other kernels on this device do not have currently.
Some of the features include:
SELinux Permissive (for root on M)
Faux's Intelliplug
Custom Governors:
bioshock, blu_active, lionheart, zzmoove, yank active, intelliactive
Arm64 topography
BFQ Scheduler (my clear favorite, there are others!)
Graphite Build Optimizations
Uber 5.3.1 aarch64 Toolchain
Linux 3.10.98 (always will be the most current linux stable)
CPU Overclock
No forced encryption
Instructions:
Flash zip in recovery
Flash SuperSU for root
Here's a link to the download (flash via twrp)
https://www.androidfilehost.com/?fid=24438995911967758
Here's a link to source
https://github.com/gchild320/flounder
Please make a backup before flashing. I'm not responsible for anything that happens to your device.
Thanks to anyone and everyone that I've picked commits from. I try very hard to ensure authorship is kept.
I recommend kernel adiutor
V1.3
Upstream Linux 3.10.93
Yankactive Governor
V1.2
Upstream Linux 3.10.60
V1.1
Upstream Linux 3.10.48
No Force Encryption
Flashable zip instead of boot.img
V1.0
Initial release
Reserved for changelog.
Tells me I need to be logged in to download from AndroidFileHost.
access denied
looks like you don't have permission to access this folder. Make sure you are signed in to an account that has permission, or check with the developer to request access.
This is what I get from AFH.
Erik
I found it here
Thanks my fault on the link, fixed.
Sent from my Nexus 6 using Tapatalk
Quick question, does it have the no force encryption also? Didn't see it in the OP.
Thanks.
Sent from my Nexus 6 using Tapatalk
ricco333 said:
Quick question, does it have the no force encryption also? Didn't see it in the OP.
Thanks.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
From my understanding it's not the kernel that forces encryption, but the fstab included while flashing whatever rom. If I'm wrong I will add whatever is necessary to kernel.
Sent from my Nexus 6 using Tapatalk
gchild320 said:
From my understanding it's not the kernel that forces encryption, but the fstab included while flashing whatever rom. If I'm wrong I will add whatever is necessary to kernel.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
fstab is always in ramdisk (so it's inside boot.img). You need to unpack and patch fstab.flounder and fstab.flounder64 (replace forceencrypt to encryptable). I wrote a quick flasheable zip yesterday to edit those files in TWRP, but maybe I missed something and that weird message of corrupted device appears in early boot. After that I flashed fire-ice kernel and it boots normally. I can share my zip with you if you want.
jolinnard said:
fstab is always in ramdisk (so it's inside boot.img). You need to unpack and patch fstab.flounder and fstab.flounder64 (replace forceencrypt to encryptable). I wrote a quick flasheable zip yesterday to edit those files in TWRP, but maybe I missed something and that weird message of corrupted device appears in early boot. After that I flashed fire-ice kernel and it boots normally. I can share my zip with you if you want.
Click to expand...
Click to collapse
Thanks I didn't think of it that way since I usually build ROM+kernel together and end up editing fstab in my device files.
Sent from my Nexus 6 using Tapatalk
Update to v1.1
Upstream Linux changes, no force encryption, flashable zip.
Thanks to @jolinnard for helping me further understand the encryption stuff!
https://www.androidfilehost.com/?fid=24052804347849159
Any plans to add f2fs support? i flashed the latest and hung so i figured it was because my data was f2fs
joeyddr said:
Any plans to add f2fs support? i flashed the latest and hung so i figured it was because my data was f2fs
Click to expand...
Click to collapse
Sure will do.
Sent from my Nexus 6 using Tapatalk
gchild320 said:
Update to v1.1
Upstream Linux changes, no force encryption, flashable zip.
Thanks to @jolinnard for helping me further understand the encryption stuff!
https://www.androidfilehost.com/?fid=24052804347849159
Click to expand...
Click to collapse
You are welcome.
Flashing new build now!
Ahoy "old friend" @gchild320 THX for your work ...
Clean Flash etc & Co tried and nothing has helped. Neverending Bootloop ...
BTW
I saw nice new BrokenOS Marshmallow screenshots ... have or you may know more infos ?!
MotoFlasher said:
Ahoy "old friend" @gchild320 THX for your work ...
Clean Flash etc & Co tried and nothing has helped. Neverending Bootloop ...
BTW
I saw nice new BrokenOS Marshmallow screenshots ... have or you may know more infos ?!
Click to expand...
Click to collapse
I've installed Ubermallow + Slim gapps and ninja kernel. It's smooth and all is running fine and smooth. Kernel is great as far as I can tell.
Hmmm ok
I test again ...
Edit
No idea what was going on ... All good now.
Nice standby ☺
Sent from my Nexus 9 using Tapatalk
gchild320 said:
Nice standby
Click to expand...
Click to collapse
Running great here too... What settings do you have? Never seen bioshock or zzmoove... I'm on bioshock now with hotplug enabled and SIO (CFQ is for hard drives). So far everything seems good (performance and battery).
I run BioShock or Lionheart usually, always underclocked...I don't typically hotplug but as far as schedulers bfq.
Sent from my Nexus 6 using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This kernel is made for the Moto X Style/Pure (xt1575). I have not tested it on the xt1572. If you would like to test it be my guest. This kernel was based off the wok done by AICP and Hashbang173 . I wanted to bring the custom kernel features into a cm based environment. The features brought over were originally done for a stock kernel setting by dirtyhank and his Frankenclark kernel. I have optimized the settings to work with BlissRom. My goal is to provide better battery life surrounded by a stable experience. I will add more features as I go... I planned to just make this the default kernel on BlissRom, but with the overall lack of development for this device and the overwhelming support I got for it. I have decided to offer it as a standalone download as well.
WARINING
I have tested this kernel....With that said. I DO NOT hold any responsibility for what you may do to your device with this product. Also make a proper backup before flashing.
Features of the Kernel
Kernel Version 3.10.95
color control (Kcal)
Underclocking (302mhz)
KSM & UKSM
Voltage readings
Fsync option (on/off)
Touchboost option (on/off)
MultiRom Support
DoubleTap2Wake/Sweet2Wake
Added Govs - ElementalX, Intelliactive, Lionheart, BioShock, BluActive, Wheatley, InteractiveX & Interactive
Bricked Hotplug
Added I/O schedulers (SIO, FIOPS & Zen)
And much more...
To Install
Be on a custom rom (also test with cm base so far)
Download ZIP
Reboot to Recovery (I have only tested on TWRP 3.0)
Flash
Wipe Cache
Reboot
ENOY
DOWNLOAD
BlissPure Kernel
I currently use Kernel Adiutor for my kernel settings. It had also been tested and works with EX Kernel Manager
Credits for all the HARD work
vadimtk
flar2
franciscofranco
nimrodsv
anarkia1976
savoca
myfluxi
AudioGod
osm0sis
nychitman1
jollaman999
imoseyon
showp1984
HashBang173
dirtyhank
XDA:DevDB Information
[KERNEL][MM 6.0] BlissPure Kernel, Kernel for the Moto X Style (Pure)
Contributors
pjgraber03
Source Code: https://github.com/BlissRoms-Kernels/kernel_motorola_msm8992
Kernel Special Features:
Version Information
Status: Testing
Created 2016-02-24
Last Updated 2016-02-24
Reserved
Reserved
Great to see a new custom kernel! Is this only for cm based ROMs (maybe you could change the thread title)?
You accidentally posted this Kernel three times in the forum.
But besides that, this looks awesome!
Sent from my XT1575 using Tapatalk
Chuckleb0ne said:
You accidentally posted this Kernel three times in the forum.
But besides that, this looks awesome!
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
I wasn't sure what was going on there
Sent from my XT1575 using Tapatalk
Thanks!
So be to be clear: Can we request features here for Blissrom only? Will you develop in parallel to Hashbang or will your work be unified?
I would like to see Wake Gestures from flar2.
I can't get either of the wake controls to work :/
HikingMoose said:
I can't get either of the wake controls to work :/
Click to expand...
Click to collapse
Working great here with Bliss Rom.
Have enabled it in your Kernel manager app ( FX or kernel adiutor)?
What is the difference between this thread and your other thread in this section?
Sent from my XT1575 using Tapatalk
I am having some issues with the kernel. The first one is all of the cores are on all of the time. The second problem is the little cluster is scaling like crazy. I use very slow scaling settings that using frankenclark would only show one core and sometimes two at 384 with everything closed and now all little cores constantly scale up to 1440 with everything closed. Other wise, I love seeing some a cm kernel. O, I had the issue on acip and RR
suprstar29 said:
I am having some issues with the kernel. The first one is all of the cores are on all of the time. The second problem is the little cluster is scaling like crazy. I use very slow scaling settings that using frankenclark would only show one core and sometimes two at 384 with everything closed and now all little cores constantly scale up to 1440 with everything closed. Other wise, I love seeing some a cm kernel. O, I had the issue on acip and RR
Click to expand...
Click to collapse
Did you turn on hotplug? I played around with this for a while last night, and I think MSM MPdecision was off by default if kernel adiutor was picking up the setting right. It didn't start unplugging cores until it was enabled.
It did seem like cores online and core frequency was a little more up and down and in general higher than stock frankenclark even with the same profile for the tunables. I rarely had less than three little cores on and usually around 50% when I would have expected two on at min frequency. That was on bliss ROM.
HikingMoose said:
I can't get either of the wake controls to work :/
Click to expand...
Click to collapse
You enable them on the kernel audit app?
mrdunlop said:
You enable them on the kernel audit app?
Click to expand...
Click to collapse
Well yeah, it won't work if they are not turned on. lol. I tried them both, neither would wake the phone. I am on stock kernel right now, I'm going to flash it again tonight on Temasek and see if it still isn't working.
jason2678 said:
Did you turn on hotplug? I played around with this for a while last night, and I think MSM MPdecision was off by default if kernel adiutor was picking up the setting right. It didn't start unplugging cores until it was enabled.
It did seem like cores online and core frequency was a little more up and down and in general higher than stock frankenclark even with the same profile for the tunables. I rarely had less than three little cores on and usually around 50% when I would have expected two on at min frequency. That was on bliss ROM.
Click to expand...
Click to collapse
I didn't have it on, but it did help the cores go offline. I'm getting down to only one or two cores while idling with the screen on, but i am also only running at 1080p. And just like you, the cores are scaling like crazy
The link in the OP is not working but you can find the kernel here:
http://downloads.blissroms.com/Bliss/Official/clark/kernel
Make sure you guys on TWRP are backing up your boot before flashing the kernel.
Because if for some reason you have trouble with this kernel, then restoring your boot will restore your original kernel and get you back up and running again.
I flashed the kernel on an AOSP-CAF based ROM knowing full well it probably wouldn't work because it's not FOR that ROM. And sure enough, it didn't.
So restoring my boot took three seconds and I was back up & running again.
Ya'll probably won't have any issues on any CM based ROM's but back up your boot just in case!
added to index
[INDEX] Moto X Pure Resources Compilation Roll-Up
I mentioned it on one of the three kernal forums already but this time it's more of a heads up
If you are on Resurrection Remix do not flash this kernal. Currently there is a bug where you lose accesses to your sd card. I am unable to determine if it's something that the Resurrection remix rom maker did to the kernal to make his rom specific to to that kernal or if it's just a kernal bug as with the stock (xclark kernal) you can access your sdcard fine. This isn't only this kernal however. The AICP kernal does the exact same thing on Resurrection Remix
Sent from my XT1575 using XDA Labs
WelcomeToTheSkye said:
I mentioned it on one of the three kernal forums already but this time it's more of a heads up
If you are on Resurrection Remix do not flash this kernal. Currently there is a bug where you lose accesses to your sd card. I am unable to determine if it's something that the Resurrection remix rom maker did to the kernal to make his rom specific to to that kernal or if it's just a kernal bug as with the stock (xclark kernal) you can access your sdcard fine. This isn't only this kernal however. The AICP kernal does the exact same thing on Resurrection Remix
Sent from my XT1575 using XDA Labs
Click to expand...
Click to collapse
Didn't see this until after I tried to install it on RR Whats funny is it wouldnt even boot for me, it just hung on the RR red and black screen after I flashed it. I was like, wait this should 100% work with RR. So weird. Still looking for another kernel to use, specifically one that has screen color profile Support, but haven't found any.
Sent from my XT1575 using Tapatalk
Sheetzie03 said:
Didn't see this until after I tried to install it on RR Whats funny is it wouldnt even boot for me, it just hung on the RR red and black screen after I flashed it. I was like, wait this should 100% work with RR. So weird. Still looking for another kernel to use, specifically one that has screen color profile Support, but haven't found any.
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
Today I decided to take upon it myself to download CM's source and add color profile into kernel since I love the ROM but can't stand the washed out look.
I might share it later, although I know nothing about configuring kernels, except how to cherry-pick stuff for it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello everyone, this is my personal kernel for the OnePlus 5. While I am not a super star kernel developer, I do know my way around it. Hopefully you enjoy :highfive:
NOTE: This list fluctuates with versions, it will not always been 100% up to date
Here are the major features of the kernel (feel free to explore Github)
Based on GzR kernel
Up to date with the latest stable Linux version (4.4.159)
Up to date with the latest CAF branch (kernel.lnx.4.4.r27-rel)
Mainline patches from Linux, focusing on bug fixes/security
Mainline CFQ scheduler improvements
Several subsystems converted to use power efficient workqueues
Backlight dimmer
KCAL color control
CPU Input Boost driver
Devfreq Boost driver
Sound control
Wakelock control
Westwood as the default TCP algorithm
Built with the latest Google Clang 7.0.2 toolchain
Hides bootloader unlock from SafetyNet (can still fail through other means)
Disables dm-verity
Does NOT modify decryption status
Flashed with AnyKernel2 (thanks to @osm0sis)
Primary: https://androidfilehost.com/?w=files&flid=283181
Through TWRP:
If you are on a custom ROM:
If you are on the kernel that came with your ROM: flash the kernel zip and reboot
If you are on a custom kernel: dirty flash your ROM zip, flash the kernel zip, and reboot
Upgrading from one Reaper version to the other:
Just flash the kernel zip and reboot
1.1 Q: I am having an issue, can you help me?
1.1 A: I am not an amazing kernel developer but I will certainly try my best. First, start by reading the release posts, as I may make note of a particular issue. Also search the thread to see if I have discussed it before. If you see nothing, please provide me with a dmesg/last_kmsg and logcat, your ROM/kernel version, and a detailed description of the issue, following this guide. If I can't reproduce reliably, I'm not going to fix the issue.
1.2 Q: What ROMs are compatible with the custom builds?
1.2 A: My daily driver is GZOSP so I test all the builds on this ROM but this kernel should work on other pie ROMs. If you are using a ROM with no issues, let me know and I'll add it here! If you are having issues, following the above steps and I'll attempt to fix whatever incompatibility there is. If I can't do it without breaking GZOSP compatibility, you're out of luck.
1.3 Q: Can you add xyz feature?
1.3 A: If you link me the commits or tell me what kernel you had the feature in, I can take a look at them. I will not go digging super hard for commits and I will ignore requests that don't include this information. I won't promise that I will merge every request but I will always take it into consideration.
1.4 Q: How do I control the kernel?
1.4 A: I want to be very clear: the kernel does NOT need to be tuned to be useful. Most of the improvements are under the hood and don't require any user intervention to take advantage of them. In fact, if you don't know what you are doing, you could degrade the experience. To control the user visible features of the kernel listed above, I recommend using @flar2's EX Kernel Manager.
1.5 Q: OMFG MY BATTERY SUXXXX PLS FIX!!!
1.5 A: The kernel doesn't drain any battery, use an app like BetterBatteryStats to figure out what app is screwing with your phone.
The various other developers for their patches
@martinusbe, @nathanchane for their work on GzR kernel
@nathanchance for android-linux-stable organization, thread inspiration, patches, tips and for inspiring me to start kernel development
@KuranKaname for helping me with kernel and being a bro
@nychitman1 for him work on DU kernel (lots of patches are inspired from him work)
@mady51 for introducing me in kernel development
@osm0sis for AnyKernel2
@akhilnarang for him modified AnyKernel2 for OP5, help and patches for my kernel
All of you guys for viewing the thread
reaper (custom ROMs - 9.0): https://github.com/FRNKSTN/Reaper/tree/reaper
DISCLAIMER: I openly welcome off topic in my threads. Mods, please do not clean off topic discussion and users, do not complain about off topic discussion here. I may direct you to another thread if it is so suited but I won't have the discussion cleaned. Thank you.
XDA:DevDB Information
Reaper, Kernel for the OnePlus 5T
Contributors
FRNKSTN, martinusbe, KuranKaname
Source Code: https://github.com/LiquidRemix-Devices/android_kernel_oneplus_msm8998
Kernel Special Features: HMP
Version Information
Status: Stable
Current Stable Version: 20180930
Stable Release Date: 2018-09-30
Created 2018-09-30
Last Updated 2018-10-15
Reserved
Reserved
Great job
fowzanaamir said:
Great job
Click to expand...
Click to collapse
Thanks
Nice kernel, so far it's very responsive and idles at 300 consistently using interactive. Looking forward to increased standby battery life. You rock!!
For castom or OOS ?
Ideas4ya said:
Nice kernel, so far it's very responsive and idles at 300 consistently using interactive. Looking forward to increased standby battery life. You rock!!
Click to expand...
Click to collapse
Thanks! I'm glad you like
[email protected] said:
For castom or OOS ?
Click to expand...
Click to collapse
For custom ROMs only
Can we OC ? thx
mannyalba said:
Can we OC ? thx
Click to expand...
Click to collapse
Give me commits for that and I'll take a look
Using on CRdroid 9.0 and is all working a treat great work
Sent from my ONEPLUS A5010 using Tapatalk
danny19901 said:
Using on CRdroid 9.0 and is all working a treat great work
Click to expand...
Click to collapse
Thanks
Delivered on the crDroid 8.1. While everything is fine
[email protected] said:
Delivered on the crDroid 8.1. While everything is fine
Click to expand...
Click to collapse
Very cool :highfive: Let me to know if all is working perfect.
manojpawarsj12 said:
Good work ?
Click to expand...
Click to collapse
Thanks
FRNKSTN said:
Very cool :highfive: Let me to know if all is working perfect.
Click to expand...
Click to collapse
I like your work so much, and I know you do everything perfect, I'll add your kernel in my build as default kerenl as soon as I'll get time to build.
Best of luck [emoji106]
mukesh22584 said:
I like your work so much, and I know you do everything perfect, I'll add your kernel in my build as default kerenl as soon as I'll get time to build.
Best of luck [emoji106]
Click to expand...
Click to collapse
Thanks, bro! This is cool
FRNKSTN said:
Give me commits for that and I'll take a look
Click to expand...
Click to collapse
No idea how to do that, i mean overclock/underclock ?
mannyalba said:
No idea how to do that, i mean overclock/underclock ?
Click to expand...
Click to collapse
Check FAQ