I've been trying to get an original Omate Truesmart (mostly for Android 4.2) and I've been having difficulty finding this watch.
You can't get it anymore, can you? I bought an Ordro SW16 and the compass is broken on it, so I had to return it.
AT328PRO said:
I've been trying to get an original Omate Truesmart (mostly for Android 4.2) and I've been having difficulty finding this watch.
You can't get it anymore, can you? I bought an Ordro SW16 and the compass is broken on it, so I had to return it.
Click to expand...
Click to collapse
I sent you a PM.
The DooGee S1 and the Lemfo UC08 appear to be identical in looks and specs.
Thanks for the replies, guys. I just bought one off eBay.
After a bad experience with the ORDRO SW16 (a TS clone) because of it's borked compass, I decided to go with an original TS instead.
Related
broken cant find any replasment..any help please?
You tried ebay?
sure did..but there is nothing. i found a uk used seller (he sold over 150 digitizers) but no available any more...
i need a digitizer for that phone (zte blade - orange san fransisco or dell).. i only have it for 2 weeks
Probably just as cheap to buy a new phone.
sirios6 said:
sure did..but there is nothing. i found a uk used seller (he sold over 150 digitizers) but no available any more...
i need a digitizer for that phone (zte blade - orange san fransisco or dell).. i only have it for 2 weeks
Click to expand...
Click to collapse
you can find 100% Genuine ZTE Blade Front Fascia + digitizer screen in HERE
Dealsextreme.com
I think this will help you. if it does please THANK me.
Sent from my Blade
Helo.
My gf has ZTE blade, suddenly she wakes up one morning and the digitizer looks like spider net (as ussually noone did that, right...). So this wouldn't be a problem, im IT fan, so the order of new digitizer after a few informations flew to me was placed and the digitize came, even with the tools to replace - it is this one:
ebay
I replaced it and all fitted together, everything was cool, BUT! (here it is, when the trouble starts)
It doesn't recognize touches.
So after the whole summer I had some time to do a little research and found this post in forum on DX site, where they sell the digitizers:
Not valid for ZTE Blade (European) -> Hi all.
I've bought and installed this touch screen. The phone don't recognize it. It doesn't work.
The chip is diferent than the original. The chip's mark of the original screen is synaptics. Although in the screen is printed ZTE like the original.
I suspect that this model is incompatible with the european phone at least.
Click to expand...
Click to collapse
So does anyone know, how to find the correct model? As everyone, I dont want to spend extra money for something not working with my model.
The model of the phone is this one, so with the TFT screen, not the OLED. already rooted.
Can the problem be caused by the phone beiing rooted? I dont believe that.
Thanks all, xda has always been my best hope in unsolvable problems:cyclops:
Try a more recent rom, like Cyanogen 7.2, I think they changed the digitizer in later models.
wbaw said:
Try a more recent rom, like Cyanogen 7.2, I think they changed the digitizer in later models.
Click to expand...
Click to collapse
There is ICS with CM i think, so it's one of the latest. Are there any other suggestions please? Don't tell me,that XDA won't come up with something
you need to find out exactly what chipset it is & if there is a driver in the kernel for it. if it's a standard blade touchscreen (there have been a few different versions) then it should work in recent cm7 or cm9 & most roms based on those. if there is a working kernel driver for the digitizer, then either your new digitizer doesn't work, there is some other fault on the phone, or you connected it wrong.
wbaw said:
you need to find out exactly what chipset it is & if there is a driver in the kernel for it. if it's a standard blade touchscreen (there have been a few different versions) then it should work in recent cm7 or cm9 & most roms based on those. if there is a working kernel driver for the digitizer, then either your new digitizer doesn't work, there is some other fault on the phone, or you connected it wrong.
Click to expand...
Click to collapse
Can hou pls explain, how am i going to find out what chipset i have and wheter my screen is standard? I think the digitizer is.connected properly. Also is there a way to find what drivers do i need for the digitizer? Or where can i finnd my kernels drivera? Thanks a lot for helping.
so the problem sits at the same stage at the time. another birthsday is coming, im playing with a thought to buy a new phone instead - do you think blade 2/3 is worth it? is it equal to this first model comparing price/user output? im aware of the topic non related to the section, but it is still solving the initial problem
Sent from my HTC Desire using xda app-developers app
Shmaic said:
so the problem sits at the same stage at the time. another birthsday is coming, im playing with a thought to buy a new phone instead - do you think blade 2/3 is worth it? is it equal to this first model comparing price/user output? im aware of the topic non related to the section, but it is still solving the initial problem
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
They're pretty good phones for the price but they have basically have no dev support and they are after all Chinese phones. Its better to go for a renowned company
the zte blade digitizers have run out for quite some time now!
---------- Post added at 04:46 PM ---------- Previous post was at 04:30 PM ----------
it's annoying having to post 10 times just to get over limitations... I have confirmed my email address you know!
I am curious to know why I don't encounter the issues/problems that are mentioned here, eg . wifi disconnection, screen flickering, long charging hours, etc. even before the ics upgrade.
The reason I'm asking is that my friend is coming to HK from the U.S. and wants to buy the Sony Tablet S. My concerns, apart from the region for future update, are the above issues associated with the Sony sold overseas (local forum here did mention these issues but not as often as here).
My tablet is made in China and is not rooted.
Would those who have issues with the tablets please advise where is your device made and whether it is rooted or not.
Appreciate that.
p.s. there is now promotion in HK when buying Sony tablets, US$40 supermarket voucher and free cover. I got a free cover when I bought my tablet s in Feb this year.
I got all those problems AFTER ICS upgrade. No issues before I upgraded.
Not rooted device.
shuckle said:
I got all those problems AFTER ICS upgrade. No issues before I upgraded.
Not rooted device.
Click to expand...
Click to collapse
Is yours made in China? It's shown on the lower left hand corner at the back. I don't know if all are made in China.
I havent experienced any software problem with this tab. Bought in India and still on Honeycomb (Latest Version).
Same
Hi, i got almost same problems.
I bought tablet in Malaysia and before upgrate it was awesome, i couldnt see any problems.
After update, i have wifi issue, screen cutting (when i use multitasking), it is very slow. browser always FC both chrome and stock
I guess it is related to software, ics is not ready for tablets i guess.
No root, everything stock.
i cant switch ON my tablet s ..press power button few times and screen still blank ..battery is fully charged.
Do reset. That helped me. (my table is made in China)
pin in the reset hole - it's like taking out the battery and re-inserting.
Hi, I initially got the Truesmart through kickstarter and then went on to get Omate X. Hardly used the Truesmart as it did not work with IOS, could only use it as a standalone. Similar situation with Omate X, got excited yesterday when read a thread of an IOS app so I synced it and found something wrong with the Day on the date, tried sync on/off but same result, is it just me ? (pic attached)
Also how do I install app on Truesmart other than ostore ? I am thinking of using it as a remote viewfinder with a wifi camera like go pro or sony, etc.
Any advise ?
gadgetfreak75 said:
Hi, I initially got the Truesmart through kickstarter and then went on to get Omate X. Hardly used the Truesmart as it did not work with IOS, could only use it as a standalone. Similar situation with Omate X, got excited yesterday when read a thread of an IOS app so I synced it and found something wrong with the Day on the date, tried sync on/off but same result, is it just me ? (pic attached)
Also how do I install app on Truesmart other than ostore ? I am thinking of using it as a remote viewfinder with a wifi camera like go pro or sony, etc.
Any advise ?
Click to expand...
Click to collapse
Gave up Omate....No support, my SD card which I order during Kickstart is still not sent to me. Wrote to them and asked me write to their support. Asked for order detail which I compiled many times for them but still no action. The charger is also malfunction but they refuse to rectify for me and you also cannot buy as they told me they got no stock and not sure when they will stock it. Hopeless vendor.
bkling said:
Gave up Omate....No support, my SD card which I order during Kickstart is still not sent to me. Wrote to them and asked me write to their support. Asked for order detail which I compiled many times for them but still no action. The charger is also malfunction but they refuse to rectify for me and you also cannot buy as they told me they got no stock and not sure when they will stock it. Hopeless vendor.
Click to expand...
Click to collapse
Everyone gave up on Omate long ago. So many unfulfilled promises. It's a miracle they still manage to sell watches to uninformed consumers.
Hello everybody. I am very new here and never worked with tablet ROMs.
I purchased a cheap Chinese tablet (sorry, unable to post link but I got it from everbuying net) back in March just to have a Pandora streamer. Unit is called S93, has AllWinner A33 and running Android 4.4.
It ran fine until about 4 months ago when it started with random pop-ups. I ran several adware, virus, spyware tools, it takes care of the problem unless unit is booted. Obviously loader is contaminated. I read lately that it is common for cheap tablets to have a lots of trash installed - did not know it when I ordered it. While tossing it would not be a big loss, it works for what I need it, for other things I have Samsung Note 2014.
Is there a way to either clean t up or flash with clean ROM? Again, I am totally new with all this, so do not beat me if I am asking stupid questions.
I have read "Venstar V140D A33 tablet: How to get rid of the preinstalled malware of Stock ROM" by BlueFlame on this forum, but I do not know if it applies to my model.
I would appreciate any help anybody may offer.
JM
Bump
I found that one of the system level apps running on the tablet is CloudsService.apk and another is Globalweather.apk. None of removal tools can clean it since it is a part of the system. Ideas?
JustMad said:
Hello everybody. I am very new here and never worked with tablet ROMs.
I purchased a cheap Chinese tablet (sorry, unable to post link but I got it from everbuying net) back in March just to have a Pandora streamer. Unit is called S93, has AllWinner A33 and running Android 4.4.
It ran fine until about 4 months ago when it started with random pop-ups. I ran several adware, virus, spyware tools, it takes care of the problem unless unit is booted. Obviously loader is contaminated. I read lately that it is common for cheap tablets to have a lots of trash installed - did not know it when I ordered it. While tossing it would not be a big loss, it works for what I need it, for other things I have Samsung Note 2014.
Is there a way to either clean t up or flash with clean ROM? Again, I am totally new with all this, so do not beat me if I am asking stupid questions.
I have read "Venstar V140D A33 tablet: How to get rid of the preinstalled malware of Stock ROM" by BlueFlame on this forum, but I do not know if it applies to my model.
I would appreciate any help anybody may offer.
JM
Click to expand...
Click to collapse
Today my Amazfit Pace with original firmware 1.3.3a won't start up (yesterday night I've made a shutdown). The screen stay black, no spinning setup screen, non change of luminosity. Battery was about 90%.
Is there something I can do? Longer button press? Is it dead?
Thanks everyone!
Looks dead. Do you see any USB device, if it is connected?
Neuer_User said:
Looks dead. Do you see any USB device, if it is connected?
Click to expand...
Click to collapse
No USB detected
Arrived and used less than 1 month
:crying:
gianky69 said:
No USB detected
Arrived and used less than 1 month
:crying:
Click to expand...
Click to collapse
Sorry for your watch. Try to get it replaced.
Just contacted GearBest... waiting for reply...
Thanks
I have the same problem.
To me it seems like a hardware problem in the last batch from the factory.
What is your serial number? Mine is 16121728047891.
I returned it for replacement.
You can see the problem also here:
https://www.youtube.com/watch?v=Xva5O95LHA4
Also other people who have the problem in the comment section.
Amazfit is DEAD !
Hi everyone.
I have the same problem, i contact the amazfit company, and i dont like the answers.
According to them the device was not manufactured by them and do not want to give due support.
Still, according to them the gearbest is not an authorized dealer, I sent SKU code and the SN and the amazfit does not know the device.
Funny a fake device connect to the application and have all the features.
Unfortunately I believe the utilima update was a scheduled obsolescence.
I really really like the device is usual practical and very beautiful. So the display could be more colorful. rsrsr!
My device lasted exactly 2 years. No one wants to take on the support responsibility.