[Guide] OnePlus 2 Home Button Dead Solutions - OnePlus 2 General

Ok, so loads of people have faced this problem. This guide will help you to make the home button/fps work again!
Do the fingerprint sensor test first
Dial *#808#
A menu will appear
Select Finger print test
Select Finger Print auto test
If it says pass, you already have a working sensor
Reboot the phone to make it work again
If it says fail, follow the given methods!
Method 1
Put the phone on charging
Note: Do not remove the charging cable during the whole procedure
Go to Settings>Apps>All
Find com.oneplus.fingerprints.service
Select Clear Cache
Select Force Stop
Press the Power button for 10 seconds until the phone is completely off
Switch it on normally
Check if it works or not!
Method 2
Press the power button to bring up the reboot menu
Long press on Power Off option
Reboot to Safe Mode will appear
Click ok and let it reboot
Check home button if it works or not
Reboot normally
Tip: Try doing method 1 in method 2 when in safe mode
Method 3 <<Tested working by me
Drain the battery to 0%
When the phone switches off, keep pressing the power button and starting it
Keep doing Step 2 for 20 times
This is for draining the left over battery completely
Now, charge the phone to 100% keeping it switched off
Remember: Charge to 100% Works only when it is fully charged
After it says "OK" and it is fully charged, keeping the charging cable in, press the power button to boot the phone
Remember: DO NOT TAKE OFF THE CHARGING CABLE HERE
Enable the hardware buttons from settings if you have turned them off if you have been using software buttons (Settings>Buttons)
Check if the home button and fingerprint sensor works
Method 4
Clean flash OOS Stock version 2.0
Check if the home button works now
Best of luck!

Will keep this in bookmarks, because as a regular thing, this device should break my home button too.
Thanks so much buddy.

method 3 worked for me when all else failed.
Nice post here

Method 2
Method 2 worked for me! I've tried a lot of things, including Safe Mode things. but this time Method 2 while charging worked! Thank you very much!

For me none of the methods worked.
I presed the sensor arround until somehow changed to homescreen guess it was a bad contact or ground issue but its been working flawless since yesterday
Sent from my ONE A2005 using Tapatalk

I should mention that there is a shortcut rather than having to dial the number, you can make a shortcut with any activity launcher, in fact Nova launcher for instance can do that natively.
Sent from my ONE A2003 using Tapatalk

Wow I should have came across this thread before!
I had this issue before, but I fixed this issue with a clean install to OOS 2.2.0 myself.
Overall, nice post OP!

sewer56lol said:
I should mention that there is a shortcut rather than having to dial the number, you can make a shortcut with any activity launcher, in fact Nova launcher for instance can do that natively.
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
What number? Wrong group/thread lmao
Or am i missing something
Sent from my ONE A2003 using Tapatalk

regalstreak said:
What number? Wrong group/thread lmao
Or am i missing something
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Fingerprint sensor test number and really any other hidden utility.
Sent from my ONE A2003 using Tapatalk

regalstreak said:
Ok, so loads of people have faced this problem. This guide will help you to make the home button/fps work again!
Do the fingerprint sensor test first
Dial *#808#
A menu will appear
Select Finger print test
Select Finger Print auto test
If it says pass, you already have a working sensor
Reboot the phone to make it work again
If it says fail, follow the given methods!
Method 1
Put the phone on charging
Note: Do not remove the charging cable during the whole procedure
Go to Settings>Apps>All
Find com.oneplus.fingerprints.service
Select Clear Cache
Select Force Stop
Press the Power button for 10 seconds until the phone is completely off
Switch it on normally
Check if it works or not!
Method 2
Press the power button to bring up the reboot menu
Long press on Power Off option
Reboot to Safe Mode will appear
Click ok and let it reboot
Check home button if it works or not
Reboot normally
Tip: Try doing method 1 in method 2 when in safe mode
Method 3 <<Tested working by me
Drain the battery to 0%
When the phone switches off, keep pressing the power button and starting it
Keep doing Step 2 for 20 times
This is for draining the left over battery completely
Now, charge the phone to 100% keeping it switched off
Remember: Charge to 100% Works only when it is fully charged
After it says "OK" and it is fully charged, keeping the charging cable in, press the power button to boot the phone
Remember: DO NOT TAKE OFF THE CHARGING CABLE HERE
Enable the hardware buttons from settings if you have turned them off if you have been using software buttons (Settings>Buttons)
Check if the home button and fingerprint sensor works
Method 4
Clean flash OOS Stock version 2.0
Check if the home button works now
Best of luck!
Click to expand...
Click to collapse
Unfortunately, neither of the 4 methods works for me.
*edit: What I did, I reformatted all data wiped all cache. Installed the latest CM13/picogapps. BAM! it's working again!

teeluun said:
Unfortunately, neither of the 4 methods works for me.
*edit: What I did, I reformatted all data wiped all cache. Installed the latest CM13/picogapps. BAM! it's working again!
Click to expand...
Click to collapse
Lucky you. Will add this method lulz
Sent from my ONE A2003 using Tapatalk

few days ago I wrote that method 2 with charging helped, but now it stopped working again

Elxaan said:
few days ago I wrote that method 2 with charging helped, but now it stopped working again
Click to expand...
Click to collapse
Did you flash the latest ota? That might be the problem. Try method 2 again lol and reflash the old oos
Sent from my ONE A2003 using Tapatalk

regalstreak said:
Did you flash the latest ota? That might be the problem. Try method 2 again lol and reflash the old oos
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
No, I didn't anything with OS after fixing

Elxaan said:
No, I didn't anything with OS after fixing
Click to expand...
Click to collapse
Hmm try method 2/3 again
Sent from my ONE A2003 using Tapatalk

After following step 1 and step 2 my oneplus launcher isn't responding at all. now i don't have a working phone. GREAT!!!......

aleco90 said:
After following step 1 and step 2 my oneplus launcher isn't responding at all. now i don't have a working phone. GREAT!!!......
Click to expand...
Click to collapse
You really did something wrong
Sent from my ONE A2003 using Tapatalk

regalstreak said:
You really did something wrong
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Love how that's your first reaction. It's a Step By Step thing, you can't go wrong!. How about the phone is just ****ty as hell? or better? help me?

aleco90 said:
Love how that's your first reaction. It's a Step By Step thing, you can't go wrong!. How about the phone is just ****ty as hell? or better? help me?
Click to expand...
Click to collapse
Sideload some launcher with adb, otherwise dirtyflash the rom zip
Sent from my ONE A2003 using Tapatalk

What I did was two things. First I went to system/usr/keylayout and added 102 HOME VIRTUAL to the end of that file (follow the examples in the file) and then I installed xposed, downloaded gravity box MM, turned on the option in navigation keys to disable double tapping home button, and rebooted. This fixed my home button.

Related

A working Svoice on SII.

http://forum.xda-developers.com/showthread.php?t=1662552
Just installed on AOKP. Everything works. Just want to share.
Give a ljnk the one he gives sucks I get 10kbs
Sent from my SGH-I777 using Tapatalk 2
Virus1x said:
Give a ljnk the one he gives sucks I get 10kbs
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
+1. I cant even get the download page to load. Times out on me every time.
Sent from my SAMSUNG-SGH-I777 using XDA
This link worked for me just fine.
http://wanamlite.com/forums/showthread.php?tid=28
Ask it something complex like "How tall is the Empire State Building" then click the "More" button below S-Voice's response.
Why whats supposed to happen
Sent from my SAMSUNG-SGH-I777 using XDA
moneyover said:
Why whats supposed to happen
Sent from my SAMSUNG-SGH-I777 using XDA
Click to expand...
Click to collapse
Well I don't know about this particular version since people are still reporting problems downloading it, but in all the versions of S-Voice I've tried crash and logcat cites a missing resource
I have no issues asking about empire state building and hitting more. The flashable zip I posted link to from wanam is like 80mb and has the libs and everything. I haven't gotten it to fc yet and I have tried.
kytrauma said:
I have no issues asking about empire state building and hitting more. The flashable zip I posted link to from wanam is like 80mb and has the libs and everything. I haven't gotten it to fc yet and I have tried.
Click to expand...
Click to collapse
okay that's good, looks like someone listened to my fix. BTW you can make it crash if you ask it to open Gallery
shishir95 said:
okay that's good, looks like someone listened to my fix. BTW you can make it crash if you ask it to open Gallery
Click to expand...
Click to collapse
Mine opens gallery just fine. I also tried complex multiplication and division and that worked also.
kytrauma said:
Mine opens gallery just fine. I also tried complex multiplication and division and that worked also.
Click to expand...
Click to collapse
Huh. Well that's great, that means someone even changed the pointers. Well now the rest of the world's caught up to my ROM
I tried this zip on serendipity and it force closes when you click more
Sent from my SAMSUNG-SGH-I777 using XDA
so far so good on ShoStock 3.0.5
I got force closed when setting a calendar entry. It set the entry but force closed in the process so it "sorta worked"
Alarm, open app, navi, texting, posting to facebook, asking questions, etc....works great on S2.
I got a massive scare though when flashing it. I hit reboot the screen dimmed and then went all funky colors. I had to rip the battery. It booted back up fine into CWM, rebooted again, and phone is working fine. I'm going to chuck that up as random.
I get s-voice to work, and well, but I don't see it listed in my app drawer. The only way to bring it up is to long press the search button. Any ideas?
Just switched roms today to Mystic v4.
EDIT: nevermind. Reboot and it showed up. ::slaps forehead
Sent from my SGH-I777 using XDA
Big Problem!
I'm running Mystic's Glory v4.0. I just dl'ed this Svoice zip to my phone. The ROM Manager asked if I wanted to install and I followed the prompts. The opening Samsung Galaxy SII screen comes on, then it goes black and nothing happens.
I popped out the battery a few times and tried to reboot, but same thing happens: Intro screen then black.
Any ideas?
drjim said:
I'm running Mystic's Glory v4.0. I just dl'ed this Svoice zip to my phone. The ROM Manager asked if I wanted to install and I followed the prompts. The opening Samsung Galaxy SII screen comes on, then it goes black and nothing happens.
I popped out the battery a few times and tried to reboot, but same thing happens: Intro screen then black.
Any ideas?
Click to expand...
Click to collapse
Try wiping cache and dalvik with a fix permissions for good measure. If that doesn't work sounds like a reflash of from is in order.
PS. Try flashing it manually in recovery instead of using rom manager. I've seen it do all kinds of weird ****.
Sent from my SGH-I777 using xda premium
kytrauma said:
Try wiping cache and dalvik with a fix permissions for good measure. If that doesn't work sounds like a reflash of from is in order.
PS. Try flashing it manually in recovery instead of using rom manager. I've seen it do all kinds of weird ****.
Click to expand...
Click to collapse
Thanks for the fast reply!
Can you give me a little more detailed instructions. How do I get into my CWM to wipe cache and dalvik with a dead phone? Or how do I reflash with a dead phone?
In fact, how do I get into recovery? I hold down the Vol Down button and the power button and instead of taking me to recovery, it goes to:
Warning!!
A custom OS can cause critical problems...
I can then either Vol Up to Continue or Vol Down to Restart phone. If I press Vol Down, say problem. Vol UP takes me to another screen that says:
Odin Mod, Downloading...Do not turn off target!!
Please advise.
Thanks!!!
drjim said:
Thanks for the fast reply!
Can you give me a little more detailed instructions. How do I get into my CWM to wipe cache and dalvik with a dead phone? Or how do I reflash with a dead phone?
In fact, how do I get into recovery? I hold down the Vol Down button and the power button and instead of taking me to recovery, it goes to:
Warning!!
A custom OS can cause critical problems...
I can then either Vol Up to Continue or Vol Down to Restart phone. If I press Vol Down, say problem. Vol UP takes me to another screen that says:
Odin Mod, Downloading...Do not turn off target!!
Please advise.
Thanks!!!
Click to expand...
Click to collapse
Sounds like you went to download mode...
To get to CWM recovery, hold vol up, vol down, and power until CWM recovery menu shows up. You can do this on a phone that is on or off.
Sent from my SGH-I777 using XDA
bookem11 said:
Sounds like you went to download mode...
To get to CWM recovery, hold vol up, vol down, and power until CWM recovery menu shows up. You can do this on a phone that is on or off.
Click to expand...
Click to collapse
I tried holding Vol Up/Down and Power buttons to go into recovery (a finger on each Vol button, then press Power), but it doesn't work. Is there a trick to it?
drjim said:
I tried holding Vol Up/Down and Power buttons to go into recovery (a finger on each Vol button, then press Power), but it doesn't work. Is there a trick to it?
Click to expand...
Click to collapse
You got this posted in more than one thread huh? Good move!
Yes theres a trick. Use the damn search function!.

[Q] power button doesn't enter in recovery

I've searched this and saw other phones ask and the answers for them not help me.
I get into recovery. The volume buttons work, but all the other buttons (power and digital) just take the screen to the wallpaper. Hitting one of the buttons again brings the text back. I have the revolutionary recovery in I see.
I haven't used this phone in like 2 years. But before I stopped I rooted and installed a good working ROM. Everything worked fine. Now I can't use it. I updated recovery with ROM manager. Then let ROM manager try and install a ROM for me, but it takes me to this same screen and does nothing.
I can't even turn the phone off when in recovery, I have to pull the Battery. This is a great little phone, I hope I didnt' screw something up.
Suggestions?
In the newer versions of CWM, you have to use the trackball at the bottom of the phone to move around and press it to select.
Wow I feel really stupid... that's he only thing I didn't push. Thank you.
Sent from my HTC Desire HD using xda app-developers app
drumist said:
In the newer versions of CWM, you have to use the trackball at the bottom of the phone to move around and press it to select.
Click to expand...
Click to collapse
It tool Me a while to figure it out. I was using the button volume up button.
Sent from my Liberty using Tapatalk 2
illogicalmind said:
Wow I feel really stupid... that's he only thing I didn't push. Thank you.
Sent from my HTC Desire HD using xda app-developers app
Click to expand...
Click to collapse
I had the same problem a week ago when trying to flash cm9 lol
Sent from my HTC One X
illogicalmind said:
I've searched this and saw other phones ask and the answers for them not help me.
I get into recovery. The volume buttons work, but all the other buttons (power and digital) just take the screen to the wallpaper. Hitting one of the buttons again brings the text back. I have the revolutionary recovery in I see.
I haven't used this phone in like 2 years. But before I stopped I rooted and installed a good working ROM. Everything worked fine. Now I can't use it. I updated recovery with ROM manager. Then let ROM manager try and install a ROM for me, but it takes me to this same screen and does nothing.
I can't even turn the phone off when in recovery, I have to pull the Battery. This is a great little phone, I hope I didnt' screw something up.
Suggestions?
Click to expand...
Click to collapse
It happens to me sometimes when I take SD card out and then go into recovery lol

Strange bug : impossible to wake the phone when it's locked

Hi!
I'm using a recent CM9 nightly with default kernel.
I would like to have your opinion : about 3/4 a week my SGS3 is "stuck" when it's locked : impossible to wake up using home or power button, the screen stays black.
The weird thing is that when it happens, the phone is not frozen : I can still hear music on the headphones and control volume using Up/Down buttons.
Sometimes I let it stuck and receive a notification some minutes later and the phone magically can be unlocked again, screen wakes when I push Home button.
Very weird and annoying when that happens.
My question is : what do you think it could be? An app? How can I debug this and know what prevents the screen to wake up when that happens?
Thanks.
Wipe and reflash the rom
zodiaxe66 said:
Wipe and reflash the rom
Click to expand...
Click to collapse
Thanks, but is that the kind of easy answer you all tell when you don't know the exact answer?
When I installed CM9 a week ago, I did do a full wipe...
I think that next time it happens, I will try to connect my SGS3 on USB and do a adb logcat, maybe I'll find useful information.
Have you tinkered with any of the could settings or voltage settings?
Sent from my GT-I9300 using xda premium
ricey1986 said:
Have you tinkered with any of the could settings or voltage settings?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Nope
slainer68 said:
Nope
Click to expand...
Click to collapse
Having a similar problem to yourself. Installed CM9 rom had a play and then went back to omegaV9 performing a full wipe using the instructions on this site before reflashing.
Since then when my phone is locked screen off then i unlock either via swipe or using security code (digits ) it looks like the phone unlocks but sort of does a warm boot with black screen for a few seconds with the two buttons down the bottom light up.
When it starts it looks like all the apps have stopped and are restarting again.
I re flashed again omega 9 thought i had it sorted but it started playing up again this evening.
If anyone has any ideas please post..
Hi, I'm a newbie here. I also exprience this problem with my samsung GT-i9300. I hoping to see a fix with this problem.
This forum has been so helpful to new android users. Thank you guys.

Sense 4.1 and + DEEP-SLEEP Wake-On-Vol FIX -- 12/9/12

Credits: Andybones, Zarboz, Nitsuj17:init.d script
You must already be on a ROM with this MOD in it, this does not add the Wake-on-vol MOD to the ROM, it just makes it work in deep-sleep now.
thanks to Nitsuj17 -- it now survives reboot.
just flash this in recovery:
http://dl.dropbox.com/u/26383143/HTC Incredible 4G/ViperLTE_2.1.1-volumewake.zip
----------------------------------------------------------------------------------------------------
You have to do this on every reboot as haven't found a way to get it to stick yet.
using something like root explorer
go to sys/keyboard/vol_wakeup
open using text editor
change the 0 to 1
save changes and exit, it'll say something about a back-up being made, but there isn't but that's ok. just open it again and make sure it's now 1, and you are good until you reboot the phone.
Once reboot, just re-do steps 1-5.
------------------------------------------------------
Feel free to use this MOD without permission.
Please give credit though..
This no work for me on viper2.1.1.
Values are changed to 1 but no go?
sent from my all powerful INC4G
prairiedogn said:
This no work for me on viper2.1.1.
Values are changed to 1 but no go?
sent from my all powerful INC4G
Click to expand...
Click to collapse
really?
that's what I'm using it's working for me..
try setting all permissions
I rebooted, locked phone, waited 2 mins, and wake-on-vol didn't work.
then did what's in the OP, waited 5 mins, and wake-on-vol worked for me.
I'll experiment further with it, but under this I assumed it worked.
I can't get it to work even messing with permissions or rebooting and retrying to set it, oh well.
sent from my all powerful INC4G
prairiedogn said:
I can't get it to work even messing with permissions or rebooting and retrying to set it, oh well.
sent from my all powerful INC4G
Click to expand...
Click to collapse
once you change it, that's it, it works until you reboot the phone.
andybones said:
once you change it, that's it, it works until you reboot the phone.
Click to expand...
Click to collapse
It's not that it's important its the fact it works for you and not me what aggravates me.
sent from my all powerful INC4G
prairiedogn said:
It's not that it's important its the fact it works for you and not me what aggravates me.
sent from my all powerful INC4G
Click to expand...
Click to collapse
user error
haha j/k
I'm not too sure man, I just re-flashed completely stock and tried again tested a bunch of times, reboot, wake on vol doesn't work, do what's in the OP, I've now tested up to 10 mins and wake on vol still works.
ill keep posting longer updates, this could just be a fluke but I'll keep reporting.
update: it's been charging now for 30 minutes, came back and used vol keys, will report back again more once fully charged and let it sit for an hour or so.
I'm glad you said user error cause that prompted me to take a look at the actual mod and thats what it was an ignorant user error I had neglected to check it in viper tweaks it now works properly....oops.
sent from my all powerful INC4G
prairiedogn said:
I'm glad you said user error cause that prompted me to take a look at the actual mod and thats what it was an ignorant user error I had neglected to check it in viper tweaks it now works properly....oops.
sent from my all powerful INC4G
Click to expand...
Click to collapse
hehe, I figured it something was going on.
Glad you got it working and thanks for confirming for me.
andybones said:
Credit: Zarboz
You have to do this on every reboot as haven't found a way to get it to stick yet.
You must already be on a ROM with this MOD in it, this does not add the Wake-on-vol MOD to the ROM, it just makes it work in deep-sleep now.
using something like root explorer
go to sys/keyboard/vol_wakeup
open using text editor
change the 0 to 1
save changes and exit, it'll say something about a back-up being made, but there isn't but that's ok. just open it again and make sure it's now 1, and you are good until you reboot the phone.
Once reboot, just re-do steps 1-5.
Click to expand...
Click to collapse
i see you noted but might want to make more clear
the mod will reset after rebooting your phone
Zarboz said:
i see you noted but might want to make more clear
the mod will reset after rebooting your phone
Click to expand...
Click to collapse
it's noted twice thought.
the very first line in red after your Credits.
and it's number 6 in the directions.
what else do you suggest?
andybones said:
it's noted twice thought.
the very first line in red after your Credits.
and it's number 6 in the directions.
what else do you suggest?
Click to expand...
Click to collapse
andy try this: http://d-h.st/KFf
md5: 2e400400b2bf850099534f3bd15b0ee2
its a quick init.d script i put together
seemed to work on my inc4g on viperLTE...tried it a few times
nitsuj17 said:
andy try this: http://d-h.st/KFf
md5: 2e400400b2bf850099534f3bd15b0ee2
its a quick init.d script i put together
seemed to work on my inc4g on viperLTE...tried it a few times
Click to expand...
Click to collapse
awesome dude thank you!! finally sticks now!!
nitsuj17 said:
andy try this: http://d-h.st/KFf
md5: 2e400400b2bf850099534f3bd15b0ee2
its a quick init.d script i put together
seemed to work on my inc4g on viperLTE...tried it a few times
Click to expand...
Click to collapse
andybones said:
awesome dude thank you!! finally sticks now!!
Click to expand...
Click to collapse
Same here!
sent from my all powerful INC4G
this is great. I went back to viper 1 for this, so now i can return to the newest. Thanks guys!
I applied this last night and everything worked fine. This morning when I tried it, it didn't work from deep sleep. Just to confirm, I'm on viper 2.0 and the only option to wake with volume is to use the volume up button. This option was fine yesterday but today didn't always work.
Sent from my ADR6410LVW using Tapatalk 2
MJL99 said:
I applied this last night and everything worked fine. This morning when I tried it, it didn't work from deep sleep. Just to confirm, I'm on viper 2.0 and the only option to wake with volume is to use the volume up button. This option was fine yesterday but today didn't always work.
Sent from my ADR6410LVW using Tapatalk 2
Click to expand...
Click to collapse
it works.
sometimes u may have to manually check to make sure it is applied. today at one point it didnt work, and i checked and it was at 0, and i changed it to 1 and it's fine. The init.d script for the most part i think 9/10 times will change it automatically.
and in Viper2.0 and up only the VOL UP key wakes the device..
this is because of the new tweak for down key to turn the device off.
even if you are not using the vol down to turn phone off tweak, only VOL UP will wake it.
I can fix this for u if you want to make both keys wake device.
andybones said:
it works.
sometimes u may have to manually check to make sure it is applied. today at one point it didnt work, and i checked and it was at 0, and i changed it to 1 and it's fine. The init.d script for the most part i think 9/10 times will change it automatically.
and in Viper2.0 and up only the VOL UP key wakes the device..
this is because of the new tweak for down key to turn the device off.
even if you are not using the vol down to turn phone off tweak, only VOL UP will wake it.
I can fix this for u if you want to make both keys wake device.
Click to expand...
Click to collapse
i'd prefer both keys (vol up, and vol down) to wake if it's easy to do.
Thanks
andybones said:
it works.
sometimes u may have to manually check to make sure it is applied. today at one point it didnt work, and i checked and it was at 0, and i changed it to 1 and it's fine. The init.d script for the most part i think 9/10 times will change it automatically.
and in Viper2.0 and up only the VOL UP key wakes the device..
this is because of the new tweak for down key to turn the device off.
even if you are not using the vol down to turn phone off tweak, only VOL UP will wake it.
I can fix this for u if you want to make both keys wake device.
Click to expand...
Click to collapse
I'd prefer a mod to allow up and down wake if you have time. I'd really appreciate it. And I'm guessing what you're saying that's happening is my problem. The script probably didn't have it changed to 1. It's not that big of a deal to me, if it works 95% of the time I'm cool with that.
Sent from my ADR6410LVW using Tapatalk 2

droid razr xt912 battery discharging super fast + hangs

i charge it at night and when i wake up battery is at 93%, a 7% discharge in about 8 hours which is reasonable. from the last few days its at 53% when i wake up.
have checked all battery apps etc and cant find any faulty app.
i need to force restart it and after some time it again hangs.
factory reset also did not solve the issue.
pls suggest what to do
What ROM are you using.?
And what does you battery usage say.?
Sent from my XT912 using Tapatalk 2
nitin_ko said:
i charge it at night and when i wake up battery is at 93%, a 7% discharge in about 8 hours which is reasonable. from the last few days its at 53% when i wake up.
have checked all battery apps etc and cant find any faulty app.
i need to force restart it and after some time it again hangs.
factory reset also did not solve the issue.
pls suggest what to do
Click to expand...
Click to collapse
Post your battery stats here
1. Run System Panel App from google play - just have a look on all the processes and see if any App is hogging the memory. - Just check if a process called android media process is running and % utilization.
2. Goto recovery and wipe your cache.
3. Download Motomizer and wipe battery stats.
4. Check if you have given permission to any location based App to access your GPS ( FB, Google Now, Maps etc)
See if it helps.
neo.ank said:
What ROM are you using.?
And what does you battery usage say.?
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
am on stock
SAJdroid said:
Post your battery stats here
1. Run System Panel App from google play - just have a look on all the processes and see if any App is hogging the memory. - Just check if a process called android media process is running and % utilization.
2. Goto recovery and wipe your cache.
3. Download Motomizer and wipe battery stats.
4. Check if you have given permission to any location based App to access your GPS ( FB, Google Now, Maps etc)
See if it helps.
Click to expand...
Click to collapse
sure, will try and post the stats here
seems i have lost root also
the phone continues to hang and gets hot
anyone in delhi can help me fix it
Back your data ,go into stock recovery and do a factory reset.
Reset will require a minimum battery level of 25%. If you are unable to perform a reset, please charge for 20-30 minutes and try reset again.
1. With the phone powered off, press the VOL UP + VOL DOWN KEY together + POWER KEY .
2. The device will display different BOOT OPTIONS
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to SELECT
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL DOWN key for 5-10 seconds
6. While still holding the VOL DOWN key tap and release the VOL UP key.
Tip: Try this step, holding the phone in landscape. If you are stuck on step 6, do a force reboot by pressing the power Key and Vol Down key, and start the process again.
7. The device will display additional menu options (Text will appear in BLUE)
8. Use the VOL DOWN Key to scroll to Wipe data / factory reset and the POWER Key to SELECT this option.
9. Use the VOL DOWN key again to select YES - delete all user data and press the POWER key to CONFIRM
10. Once the Formatting is complete, press the POWER key to confirm a REBOOT
11. The device will reboot and start the normal power up sequence .
thanks for the tip, since i am using it on reliance cdma with my number programmed, will i lose my programming + evdo ?
nitin_ko said:
thanks for the tip, since i am using it on reliance cdma with my number programmed, will i lose my programming + evdo ?
Click to expand...
Click to collapse
Yes you will lose it and have to reprogram it.
Sent from my XT912 using Tapatalk 2
can anyone in delhi do this & the programming for me ?
i will pay for the services
nitin_ko said:
can anyone in delhi do this & the programming for me ?
i will pay for the services
Click to expand...
Click to collapse
I'll look into it and help you as much as I can.
Sent from my XT912 using Tapatalk 2
neo.ank said:
I'll look into it and help you as much as I can.
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
please check the PM
thanks
nitin_ko said:
please check the PM
thanks
Click to expand...
Click to collapse
Checked it. I'm unable to PM you 'cause of your settings.
I'm not from delhi, though i live close to it. However what i meant was I can help you to do it. Its not that difficult. why pay someone for what you can do for yourself.
neo.ank said:
Checked it. I'm unable to PM you 'cause of your settings.
I'm not from delhi, though i live close to it. However what i meant was I can help you to do it. Its not that difficult. why pay someone for what you can do for yourself.
Click to expand...
Click to collapse
edited the settings to allow pm;s from members
i think it was like that by default coz i dont remember unticking that option
my issue is i am not a geek. so wud need help
other option is i discard this phone and buy a new one, but for this episode, droid razr has served me well. so am trying my final bit else will change my handset if i dont fix this issue by tomm.
nitin_ko said:
edited the settings to allow pm;s from members
i think it was like that by default coz i dont remember unticking that option
my issue is i am not a geek. so wud need help
other option is i discard this phone and buy a new one, but for this episode, droid razr has served me well. so am trying my final bit else will change my handset if i dont fix this issue by tomm.
Click to expand...
Click to collapse
As I said already I'll help you as much as I can. But m not sure how much time it might take.
Sent from my XT912 using Tapatalk 2
SAJdroid said:
Back your data ,go into stock recovery and do a factory reset.
Reset will require a minimum battery level of 25%. If you are unable to perform a reset, please charge for 20-30 minutes and try reset again.
1. With the phone powered off, press the VOL UP + VOL DOWN KEY together + POWER KEY .
2. The device will display different BOOT OPTIONS
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to SELECT
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL DOWN key for 5-10 seconds
6. While still holding the VOL DOWN key tap and release the VOL UP key.
Tip: Try this step, holding the phone in landscape. If you are stuck on step 6, do a force reboot by pressing the power Key and Vol Down key, and start the process again.
7. The device will display additional menu options (Text will appear in BLUE)
8. Use the VOL DOWN Key to scroll to Wipe data / factory reset and the POWER Key to SELECT this option.
9. Use the VOL DOWN key again to select YES - delete all user data and press the POWER key to CONFIRM
10. Once the Formatting is complete, press the POWER key to confirm a REBOOT
11. The device will reboot and start the normal power up sequence .
Click to expand...
Click to collapse
i did factory reset twice, cleared dalvik cache etc using the method above but did not do the wipe data option coz the usb was not being recognised by the pc. i took my phone to the guy who had programmed it initially , he told me if i do a wipe data i will loose all cdma settings and there will be no way to reprogramme it unless i get the usb fixed. i took the phone to gafar and showed it to a few guys, one shop asked me 3500 bucks and i was like Hell NO !!! shop # 111 asked me 800 bucks and i said yeah go ahead, he took an hour or so and later said that he changed the usb port and all but still pc did not detect it. came back sad. Seems there is hardware issue but surprisingly the usb port charges my mobile but does not recognise it.
now decided to use it till it is dies. am at a dead end now. had i not purchased a xperia tablet Z, i would have not have thought twice to go for samsung S4 cdma @35k. but seems i will have to wait a bit. Purchased a new battery for my backup phone moto glam XT800.
Let see how long does this droid razr lasts.
latest update > got my razr back to full glory
nor is it heating nor any unnecessary battery drain
i had lost root and was able to root it again
all is well that ends well
Question
nitin_ko said:
latest update > got my razr back to full glory
nor is it heating nor any unnecessary battery drain
i had lost root and was able to root it again
all is well that ends well
Click to expand...
Click to collapse
Hi, can you explain what you did to restore your phone? I have a Razr XT912 stock Jelly Bean and I think I may have the same quick battery drain problem.
thanks!
Marcelocohenarg said:
Hi, can you explain what you did to restore your phone? I have a Razr XT912 stock Jelly Bean and I think I may have the same quick battery drain problem.
thanks!
Click to expand...
Click to collapse
i had installed the drivers again , using safe mod cleaned all apps and somehow it worked.
but few days later the battery started dying. i tried everything including the wakelocks etc etc but nothing worked.
seems the battery died. my phone was may'11 and it lasted 2.3 years. use this site to find details of your handset http://sndeep.info/en
now moved on to HTC one.

Categories

Resources