Hello...i tryed to unlock my Galaxy Trend 2 lite but without any success so far.
I tried to root it, successfuly, installed variuos aps...etc. I tried to install not branded rom with Odin without success, bricked soft, repaired with Kies...after i rooted it again, changed CSC to france XEF and installed france based firmware. Still sim locked on my Vodafone RO.
Is there any way to sim unlock this phone at home ?
Bican said:
Hello...i tryed to unlock my Galaxy Trend 2 lite but without any success so far.
I tried to root it, successfuly, installed variuos aps...etc. I tried to install not branded rom with Odin without success, bricked soft, repaired with Kies...after i rooted it again, changed CSC to france XEF and installed france based firmware. Still sim locked on my Vodafone RO.
Is there any way to sim unlock this phone at home ?
Click to expand...
Click to collapse
I need the IMEI
Related
Hi,
I have a Samsung Galaxy S3 GT-I9300 locked to T-Mobile on Android 4.3 (baseband: I9300XXUGNA8) meaning it has changed the EFS parition to v2. The phone has been rooted as well. Is there any solution to remove the SIM lock? I have tried reflashing with older versions but the systems wouldn't boot up. I read that it can brick my phone completely. I tried using Vooodo unlocker and GalaxSim but error comes up, undefined. I tried EVERY SINGLE METHOD by using the codes: *#7465625# or *#197328640# but I either get Not registered on network message or some other error. In case of #0011# I can't pass the step 4 (when you type in 1 and the service should appear). The IMEI is fine, everything is fine as long as I'm on T-Mobile sim card (the signal works perfectly). I put any other foreign SIM and it doesn't ask me for the unlock code. Do you know what's the reason? I have bought an unlock code but I can't even use because any other method wouldn't work. Is there anything at all I could do? I'd really appreciate your help.
Regards,
- kali92uk
kali92uk said:
Hi,
I have a Samsung Galaxy S3 GT-I9300 locked to T-Mobile on Android 4.3 (baseband: I9300XXUGNA8) meaning it has changed the EFS parition to v2. The phone has been rooted as well. Is there any solution to remove the SIM lock? I have tried reflashing with older versions but the systems wouldn't boot up. I read that it can brick my phone completely. I tried using Vooodo unlocker and GalaxSim but error comes up, undefined. I tried EVERY SINGLE METHOD by using the codes: *#7465625# or *#197328640# but I either get Not registered on network message or some other error. In case of #0011# I can't pass the step 4 (when you type in 1 and the service should appear). The IMEI is fine, everything is fine as long as I'm on T-Mobile sim card (the signal works perfectly). I put any other foreign SIM and it doesn't ask me for the unlock code. Do you know what's the reason? I have bought an unlock code but I can't even use because any other method wouldn't work. Is there anything at all I could do? I'd really appreciate your help.
Regards,
- kali92uk
Click to expand...
Click to collapse
Try to flash an unbranded version, like this here: http://www.sammobile.com/firmwares/3/?download=28378
And than try it again with your code.
Tkkg1994 said:
Try to flash an unbranded version, like this here: http://www.sammobile.com/firmwares/3/?download=28378
And than try it again with your code.
Click to expand...
Click to collapse
This particular firmware fails to flash it through Odin. I assume it's designated for GT-I9305, not I9300 ... I have tried the unbranded versions for my model anyway and I usually end up in the bootloop. Any other solution? Thx
Factory reset after Odin flash.
Hello! How can I root a Vodafone Smart 7 Prime (Vodafone 600)? I used apps like kingroot,kingoroot etc. and no result... I used and PC versions of rooting apos, same without success. Is there a solution to root this phone?
I tried to install UK stock rom, but no result, returned an error and the install didn't start. My rom language is romanian.
EDIT: I'm trying with a STOCK ROM, not Custom... I can't change the title of this thread, sorry.
Hi everyone!
I bough my SM-G9650 in Paraguay and I'm from Brazil.
There they use the csc "UPO" and here we use "ZTO".. Because of this I can't use Samsung Pay for example.
I tried factory reset (and wiping from recovery too) my cellphone and installing the most recent custom rom zto through ODIN (most recent) but the csc still UPO.
Anyone can help me?
My SIM Card is from Brazil and in any try it not asked for apply the configurations from this SIM card.
If your device is factory unlocked try with a SIM from a another Brazil Carrier , that works for example using the last ARF (Multi CSC OWO) in México , if i put a Telcel (Mexican carrier) SIM in the first boot the device don´t ask anything and the CSC is from CHILE (CHL) , but i repeat the process (With a SIM from another carrier installed) and in the first boot the device ask for a factory reset to apply changes and my csc change to "MXO" (Mexico).
Try that.
A few days ago I got my Samsung A21s (SM-A217M) and I wanted to test out different firmware regions (choose the one where I live) so I downloaded 3, one was from Brasil and the other 2 are from here (tripled checked the CSC) but when I try to flash the correct firmware from my region it passes but when the phone boots up it looks exactly the same from the brasilian firmware, same network providers, apps language, etc. I have even tried just flashing the CSC but nothing has worked at all. Is there something that im missing? Is there another method that will allow me to change to the correct firmware?
Hi all...
I recently flashed BTU Android 12 firmware on my XFA Galaxy S10e (exynos). Everything went perfectly, it defaulted back to XFA...
Then tried the same thing on my Galaxy S20 FE (exynos) (also installed the BTU Android 12 firmware), and am now struggling. The firmware first defaulted to Russia (SER). I was able to downgrade back to Android 11 (BL 8 for both) but then the CSC defaulted to Turkey (TUR).
Now, no matter what I do, I cannot get it back to XFA, or anything other CSC for that matter. It's stuck on TUR, no matter what region of firmware I install. Even tried XFE which is not an OXM CSC and it still went back to TUR. And I cannot currently use Samsung Pay.
I cannot use SamKey as my work laptop won't let me install it (Endpoint Security quarantines it).
Does anybody have a reliable method I can follow to change it back to XFA.
I've tried flashing, even using the pit file and doing nand erase with no luck. The codes on the dialer don't work either. I've also tried flashing various firmwares such as BTU and XFE with no luck.
popz dude 10099 said:
Hi all...
I recently flashed BTU Android 12 firmware on my XFA Galaxy S10e (exynos). Everything went perfectly, it defaulted back to XFA...
Then tried the same thing on my Galaxy S20 FE (exynos) (also installed the BTU Android 12 firmware), and am now struggling. The firmware first defaulted to Russia (SER). I was able to downgrade back to Android 11 (BL 8 for both) but then the CSC defaulted to Turkey (TUR).
Now, no matter what I do, I cannot get it back to XFA, or anything other CSC for that matter. It's stuck on TUR, no matter what region of firmware I install. Even tried XFE which is not an OXM CSC and it still went back to TUR. And I cannot currently use Samsung Pay.
I cannot use SamKey as my work laptop won't let me install it (Endpoint Security quarantines it).
Does anybody have a reliable method I can follow to change it back to XFA.
I've tried flashing, even using the pit file and doing nand erase with no luck. The codes on the dialer don't work either. I've also tried flashing various firmwares such as BTU and XFE with no luck.
Click to expand...
Click to collapse
I am in the same situation
From coa(telekom romania) i go to tur(turkey) i cant still go back to my csc
S20fe.hype said:
I am in the same situation
From coa(telekom romania) i go to tur(turkey) i cant still go back to my csc
Click to expand...
Click to collapse
Mine is a Galaxy S20 FE G780F, do you have the same phone as me? I did manage to fix mine, read on to find out how.
This was not easy for me to fix. I tried samkey on someone elses laptop and wasted 2 credits because it did not work. I selected XFA on samkey and it went to SER (Russia). Second time it stayed on SER.
Downgraded to Android 11 XFA, and it got stuck on TUR (Turkey) again. No matter what I tried, it would not change from TUR.
I tried flashing pit files, rebooting with different sim cards, factory resetting many times as well as flashing about 10 firmwares both on Android 11 and 12. Still was stuck on TUR.
I then decided to flash the Australian firmware for Android 12. When the phone booted up, it was actually English. I thought it was fixed, but no, it was then on Indonesia. Atleast everything was English but samsung pay would still not work.
I then flashed the stock XFE (Samsung unbranded - South Africa) firmware and boom!!! When the phone booted everything was back to XFA.
I now have Samsung Pay as well as the latest security update which is not even out yet via OTA.
Only issue I'm experiencing now is bad battery life and the phone heats up a lot with light usage. So I'm still pissed