help bricked huawei g630-u10 - Android Q&A, Help & Troubleshooting

hi. i need help, i have huawei g630-u10, and i canot turn on phone, when i conect him to pc i see Qualcomm HS-USB QDLoader 9008. thanks to all!

hi, i am facing this today. did u solved it?

AEZ_BEST said:
hi, i am facing this today. did u solved it?
Click to expand...
Click to collapse
no,i still have that problem

i have the same problem
any solution ?
thanks in advance

shuki11 said:
hi. i need help, i have huawei g630-u10, and i canot turn on phone, when i conect him to pc i see Qualcomm HS-USB QDLoader 9008. thanks to all!
Click to expand...
Click to collapse
Can you boot into recovery ? If you can, you'll have to do a factory reset.

G630-U10 or G6-U10 Bricked
Skr00z said:
Can you boot into recovery ? If you can, you'll have to do a factory reset.
Click to expand...
Click to collapse
Same problem, also tried Qfil, Tool Studio etc but still bricked. waiting for solution.
Don't know its G630-U10 or G6-U10.
Already tried both board repairing firmware's....:crying::crying::crying:

Related

i need help moto e is not starting not charging after the battery is completely to 0%

My moto e is not starting not charging after the battery is completely to 0%
i removed and placed but also no use
not starting/charging
no boot logo and no battery charging logo
plz tell me what to do???
never shown display
.When I connect charger to it to my laptop, white led blinks for 1 second.. It shown qhsusb_bulk device. I updated its driver successfully with Qualcomm HS-USB QLoader 9008.
I am very sorry to say but your phone is hard bricked. You must have tried downgrading/upgrading firmware in a fatal pathway. Only thing you can do is getting your motherboard replaced.
nilanko said:
I am very sorry to say but your phone is hard bricked. You must have tried downgrading/upgrading firmware in a fatal pathway. Only thing you can do is getting your motherboard replaced.
Click to expand...
Click to collapse
sir plz tell me how to do it ...?
Go to service centre for a new motherboard!
vsaik1999 said:
My moto e is not starting not charging after the battery is completely to 0%
i removed and placed but also no use
not starting/charging
no boot logo and no battery charging logo
plz tell me what to do???
never shown display
.When I connect charger to it to my laptop, white led blinks for 1 second.. It shown qhsusb_bulk device. I updated its driver successfully with Qualcomm HS-USB QLoader 9008.
Click to expand...
Click to collapse
sir how to downgrading/upgrading firmware without entering into fastboot mode
hi!
vsaik1999 said:
sir how to downgrading/upgrading firmware without entering into fastboot mode
Click to expand...
Click to collapse
there's one post here, need jflash drivers (box) and flash with USB
i don't you how to but i did it in a nokia...
vsaik1999 said:
sir how to downgrading/upgrading firmware without entering into fastboot mode
Click to expand...
Click to collapse
Using custom recovery such as TWRP and then flashing TWRP-flashable firmware which you can find on the forums.
marianoasis said:
there's one post here, need jflash drivers (box) and flash with USB
i don't you how to but i did it in a nokia...
Click to expand...
Click to collapse
It does not work. Unbricking Moto E is not possible
nilanko said:
Using custom recovery such as TWRP and then flashing TWRP-flashable firmware which you can find on the forums.
It does not work. Unbricking Moto E is not possible
Click to expand...
Click to collapse
sir it is not "on"ing and it not going into fastboot also
vsaik1999 said:
sir it is not "on"ing and it not going into fastboot also
Click to expand...
Click to collapse
It won't because its hard bricked. U need a new motherboard.
nilanko said:
Using custom recovery such as TWRP and then flashing TWRP-flashable firmware which you can find on the forums.
It does not work. Unbricking Moto E is not possible
Click to expand...
Click to collapse
It is possible. Search for the thread by Lucas Eugene for unbricking moto e.
Hit Thanks if I Helped!!!
PoseidonKing said:
It is possible. Search for the thread by Lucas Eugene for unbricking moto e.
Hit Thanks if I Helped!!!
Click to expand...
Click to collapse
I followed his guide and after that, my computer stopped detecting my phone completely, not even that "bulk" thing anymore. It was totally dead.
Actually I don't think you phone is bricked because the same thing is happening to me too but I kepp on removing and disconnecting till the phone starts boot animation so not a brick by the way did you flash any roms?? Cause I'm running mm rom BTW this problem recently started with me so I'm looking for better suggestion s
What did you do to your phone before this happened?
This event occurred when my phone was completely at 0%.
The solution was to just keep it charging overnight like plugged in.
May or may not work for you.

Lg G4 HEEEEEEEEEEEElp !!!???,

hi guys i really need ur help guys and fast plsss
first
i get a new lg g4 tmobile work fine then i get the first problem when i try to run anything with sound he block bug and need to hard reset him
second
2 days after he dont wanna start i get the lg logo and he shutdown
third i try to flash him and then he dont wanna start at all and when i plug Usb i get only this
qualcomm hs-usb qdloader 9008 or something else i dont remeber pls help me
Nazough1899 said:
hi guys i really need ur help guys and fast plsss
first
i get a new lg g4 tmobile work fine then i get the first problem when i try to run anything with sound he block bug and need to hard reset him
second
2 days after he dont wanna start i get the lg logo and he shutdown
third i try to flash him and then he dont wanna start at all and when i plug Usb i get only this
qualcomm hs-usb qdloader 9008 or something else i dont remeber pls help me
Click to expand...
Click to collapse
Give some time here and read it carefully.
http://www.android.gs/update-lg-g4/
Don't worry. Just follow this guide and you will be back to life again. Good luck.
hELP
Thanks bro but my phone dont show download mode or anything else just qualcomm hs-usb qdloader 9008
Model NO : LG-H811
FCC ID : ZNFH811
H/W : 1.0 S/W : V10d
PLS HELP ME

[HELP] Tmobile V10 Hard Brick

I was changing the stock rom with H90120e_00_0316.kdz but my phone did not turn on. Not bootloader and not downloader
I was doing the method with dumph90120j but did not solve. Use the Qfile and nothing. I've tried everything and solved nothing: c
Please!!!! I do not want to lose my phone :crying::crying::crying::crying:
烧卡或者jtag
通过我的 1505-A02 上的 Tapatalk发言
im still trying it out just help me find the xml file for this device to see if we can make progress
jellomonster54994 said:
im still trying it out just help me find the xml file for this device to see if we can make progress
Click to expand...
Click to collapse
It's very difficult to get
Yep trying to create one right now
jellomonster54994 said:
Yep trying to create one right now
Click to expand...
Click to collapse
Ok, any information I am pending of your process. luck!!
try hard resetting the phone
if you want instructions let me know
exactly same problem . any one can help ? i tried boarddiag . didnt work / qfil didnt work i think files i used isnt right
now pc detect phone as qualcom 9008 any help would be apreciated

D620r EXTREMELY SUPER ULTRA HARD BRICKED.

Hello guys, it looks like this forum is still alive (unlike my phone lol) so let me explain what happened to my D620r.
Firstly - my friend bricked the phone during bootloader unlock process (xD rip) now the phone shows up as QDLoader 9008 yesterday it was like "QHSUSB_BULK" or something like this but after installing some drivers its QDLoader now lol xD (sometimes QDLoader disappears from device manager AND SHOWS UP AS http://imgur.com/a/qJSzE then i have to click the testpoint again)
BASICALLY
I'VE TRIED DOING THIS https://forum.xda-developers.com/showthread.php?t=2582142
nothing happened
and btw all partitions disappeared now there's only QDLoader in Device Manager that's all
Try this:
https://forum.xda-developers.com/g2-mini/general/guide-unbrick-bricked-wrong-aboot-img-t3128896
Nope, screen dont even light up when i connect the phone (one case was when i connected phone without battery then screen was lighting up but now there's nothing) btw im trying this right now https://forum.xda-developers.com/g2-mini/help/lg-g2-minid620r-hard-brick-recovery-t3543466 but i dont really know how to use this emmc software download app
You can follow the procedure in post #2 of the thread I linked.
not working
EMMC Software download app detects phone as "COM2 Phone in download mode"
pls halp
Kaszke said:
pls halp
Click to expand...
Click to collapse
Try to use the lg flash tool 2014 while using the downloadmode key combination. If the phone gets detect, you can flash a firmware, that is present somewhere in the internet (there are a lot).
doesnt work, pls halp again
Kaszke said:
doesnt work, pls halp again
Click to expand...
Click to collapse
If you need help, explain us your probem and tell us what you did before to solve it.
Read first post?
@ref
Simple QHSUSBBULK, I failed at flashing bootloader i think i flashed G2 one instead of G2 Mini
Kaszke said:
@ref
Simple QHSUSBBULK, I failed at flashing bootloader i think i flashed G2 one instead of G2 Mini
Click to expand...
Click to collapse
Then try again with the one for the g2m
How can i reinstall it without any adb and things?
Kaszke said:
How can i reinstall it without any adb and things?
Click to expand...
Click to collapse
I'm pretty sure you can't.
So why u tell me to do that XD
Kaszke said:
So why u tell me to do that XD
Click to expand...
Click to collapse
How did you flash the bootloader of the G2?
Do that again but with the bootloader of the g2m.
In the case you need adb:
https://forum.xda-developers.com/showthread.php?t=2317790

Bricked LG H930 (V30)

Is there any way to recover LG H930 (V30). I tried to reset FRP but chose wrong model (V300L) using Octoplus FRP by mistake.
During FRP reset the phone switched to Qualcomm HS-USB Diagnostics 9002 and then the process failed.
Now no response on phone - black screen and nothing showing on device manager. I have the dump file saved from Octoplus FRP.
Any method to save phone?
I tried volume up + power buttons
Volume down + Power button
Both volume buttons + power but no response.
If you have any tips, please share.
I have managed to get phone back into Qualcomm HS-USB QDLoader 9008 by opening phone and removing battery and reinserting. Showing up in device manager now but still black screen. Still looking into it.
I managed to fix the phone using dump file created during FRP reset, thanks to help from Octoplus Team.
To repair your device do the following:
1. Select the model which you chose by mistake. In my case V300 instead of H930 in the list of Software.
2. Select backup file "Your dump file.dump" into the Firmware slot in Software. Should be saved in the Octoplus backup folder.
3. Press "Reset FRP (Qualcomm 9008)" button in Software and write back the backup file.
It is a rare situation but I hope it helps someone in the event they need it.
iMoGGG said:
I managed to fix the phone using dump file created during FRP reset, thanks to help from Octoplus Team.
To repair your device do the following:
1. Select the model which you chose by mistake. In my case V300 instead of H930 in the list of Software.
2. Select backup file "Your dump file.dump" into the Firmware slot in Software. Should be saved in the Octoplus backup folder.
3. Press "Reset FRP (Qualcomm 9008)" button in Software and write back the backup file.
It is a rare situation but I hope it helps someone in the event they need it.
Click to expand...
Click to collapse
I just ran into this situation on my LG V30 Plus 128G. H932. I have no idea how to do what you're suggesting but i found the Qualcomm HS-USB QDLoader 9008 (COM10) in my Win 10 device manager. I was also able to pull event history etc. Anyway i can provide something from that and have the file built for me? I'll very happily donate!!
iMoGGG said:
Is there any way to recover LG H930 (V30). I tried to reset FRP but chose wrong model (V300L) using Octoplus FRP by mistake.
During FRP reset the phone switched to Qualcomm HS-USB Diagnostics 9002 and then the process failed.
Now no response on phone - black screen and nothing showing on device manager. I have the dump file saved from Octoplus FRP.
Any method to save phone?
I tried volume up + power buttons
Volume down + Power button
Both volume buttons + power but no response.
If you have any tips, please share.
Click to expand...
Click to collapse
At least you got a dump...I bricked my V35 last night while it was dumping I think but not sure like MTK you might have to wait a few days it to charge not sure about LG. Anyway have your tried this one ? all the other one didn't work so when I tried this one it worked but I didn't know so I yanked the cable and tha's how I got mine bricked.
---------- Post added at 11:47 AM ---------- Previous post was at 11:36 AM ----------
KennynGGG said:
At least you got a dump...I bricked my V35 last night while it was dumping I think but not sure like MTK you might have to wait a few days it to charge not sure about LG. Anyway have your tried this one ? all the other one didn't work so when I tried this one it worked but I didn't know so I yanked the cable and tha's how I got mine bricked.
Click to expand...
Click to collapse
I don't think I can attach yet since I'm new here.
to fix qdloader you must use jtag to restore ant boot to download mode,
send it to any repair service .
it hapen to me and the jtag soleve the problem , my device is v300s.
seloka180 said:
to fix qdloader you must use jtag to restore ant boot to download mode,
send it to any repair service .
it hapen to me and the jtag soleve the problem , my device is v300s.
Click to expand...
Click to collapse
Thanks Seloka, unfortunately it's now bricked. it lefrt Qdloader mode then never powered on again
KennynGGG said:
Thanks Seloka, unfortunately it's now bricked. it lefrt Qdloader mode then never powered on again
Click to expand...
Click to collapse
Actually it does power on just can't see it...only when I plug it into my laptop will I know because of the sounds and Device Manager.
KennynGGG said:
Actually it does power on just can't see it...only when I plug it into my laptop will I know because of the sounds and Device Manager.
Click to expand...
Click to collapse
you must install Qualcomm driver to see your device in device manager as " Qualcomm qdloader 9008"
- but for now you can't do anything without jtag or box like Medusa or octopus.
Sent from my LGM-V300S using XDA Labs
---------- Post added at 07:42 PM ---------- Previous post was at 07:34 PM ----------
seloka180 said:
you must install Qualcomm driver to see your device in device manager as " Qualcomm qdloader 9008"
- but for now you can't do anything without jtag or box like Medusa or octopus.
Click to expand...
Click to collapse
edit :
I had the same problem and was fixed by "jtag" at a repair shop . but the wide camera not work now . it see camera not available.
Sent from my LGM-V300S using XDA Labs
seloka180 said:
you must install Qualcomm driver to see your device in device manager as " Qualcomm qdloader 9008"
- but for now you can't do anything without jtag or box like Medusa or octopus.
Sent from my LGM-V300S using XDA Labs
---------- Post added at 07:42 PM ---------- Previous post was at 07:34 PM ----------
edit :
I had the same problem and was fixed by "jtag" at a repair shop . but the wide camera not work now . it see camera not available.
Sent from my LGM-V300S using XDA Labs
Click to expand...
Click to collapse
Yeah I read about those. Wonder if there's any online service for I kinda of hesistate on mailing it out. Can you recommend any ?
KennynGGG said:
Yeah I read about those. Wonder if there's any online service for I kinda of hesistate on mailing it out. Can you recommend any ?
Click to expand...
Click to collapse
no I'm in algeria ?? sorry ?.
it's a local repair shop here in algeria.
Sent from my LGM-V300S using XDA Labs
iMoGGG said:
I managed to fix the phone using dump file created during FRP reset, thanks to help from Octoplus Team.
To repair your device do the following:
1. Select the model which you chose by mistake. In my case V300 instead of H930 in the list of Software.
2. Select backup file "Your dump file.dump" into the Firmware slot in Software. Should be saved in the Octoplus backup folder.
3. Press "Reset FRP (Qualcomm 9008)" button in Software and write back the backup file.
It is a rare situation but I hope it helps someone in the event they need it.
Click to expand...
Click to collapse
How did you get a dump ? I want to do the samething just in case...
https://www.ebay.com/itm/Remote-Ser...e=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649
I used his service personally for my Qualcomm 9008 US998_20H while crossflashing H930_30b as too impatient to wait for PIE. $37 with tax. Teamviewer used to remotely install drivers and software for JTAG writting using Octopus box remotely. Worked great. I highly recommend this guy, Tennolee

Categories

Resources