Is there any way to recover LG H930 (V30). I tried to reset FRP but chose wrong model (V300L) using Octoplus FRP by mistake.
During FRP reset the phone switched to Qualcomm HS-USB Diagnostics 9002 and then the process failed.
Now no response on phone - black screen and nothing showing on device manager. I have the dump file saved from Octoplus FRP.
Any method to save phone?
I tried volume up + power buttons
Volume down + Power button
Both volume buttons + power but no response.
If you have any tips, please share.
I have managed to get phone back into Qualcomm HS-USB QDLoader 9008 by opening phone and removing battery and reinserting. Showing up in device manager now but still black screen. Still looking into it.
I managed to fix the phone using dump file created during FRP reset, thanks to help from Octoplus Team.
To repair your device do the following:
1. Select the model which you chose by mistake. In my case V300 instead of H930 in the list of Software.
2. Select backup file "Your dump file.dump" into the Firmware slot in Software. Should be saved in the Octoplus backup folder.
3. Press "Reset FRP (Qualcomm 9008)" button in Software and write back the backup file.
It is a rare situation but I hope it helps someone in the event they need it.
iMoGGG said:
I managed to fix the phone using dump file created during FRP reset, thanks to help from Octoplus Team.
To repair your device do the following:
1. Select the model which you chose by mistake. In my case V300 instead of H930 in the list of Software.
2. Select backup file "Your dump file.dump" into the Firmware slot in Software. Should be saved in the Octoplus backup folder.
3. Press "Reset FRP (Qualcomm 9008)" button in Software and write back the backup file.
It is a rare situation but I hope it helps someone in the event they need it.
Click to expand...
Click to collapse
I just ran into this situation on my LG V30 Plus 128G. H932. I have no idea how to do what you're suggesting but i found the Qualcomm HS-USB QDLoader 9008 (COM10) in my Win 10 device manager. I was also able to pull event history etc. Anyway i can provide something from that and have the file built for me? I'll very happily donate!!
iMoGGG said:
Is there any way to recover LG H930 (V30). I tried to reset FRP but chose wrong model (V300L) using Octoplus FRP by mistake.
During FRP reset the phone switched to Qualcomm HS-USB Diagnostics 9002 and then the process failed.
Now no response on phone - black screen and nothing showing on device manager. I have the dump file saved from Octoplus FRP.
Any method to save phone?
I tried volume up + power buttons
Volume down + Power button
Both volume buttons + power but no response.
If you have any tips, please share.
Click to expand...
Click to collapse
At least you got a dump...I bricked my V35 last night while it was dumping I think but not sure like MTK you might have to wait a few days it to charge not sure about LG. Anyway have your tried this one ? all the other one didn't work so when I tried this one it worked but I didn't know so I yanked the cable and tha's how I got mine bricked.
---------- Post added at 11:47 AM ---------- Previous post was at 11:36 AM ----------
KennynGGG said:
At least you got a dump...I bricked my V35 last night while it was dumping I think but not sure like MTK you might have to wait a few days it to charge not sure about LG. Anyway have your tried this one ? all the other one didn't work so when I tried this one it worked but I didn't know so I yanked the cable and tha's how I got mine bricked.
Click to expand...
Click to collapse
I don't think I can attach yet since I'm new here.
to fix qdloader you must use jtag to restore ant boot to download mode,
send it to any repair service .
it hapen to me and the jtag soleve the problem , my device is v300s.
seloka180 said:
to fix qdloader you must use jtag to restore ant boot to download mode,
send it to any repair service .
it hapen to me and the jtag soleve the problem , my device is v300s.
Click to expand...
Click to collapse
Thanks Seloka, unfortunately it's now bricked. it lefrt Qdloader mode then never powered on again
KennynGGG said:
Thanks Seloka, unfortunately it's now bricked. it lefrt Qdloader mode then never powered on again
Click to expand...
Click to collapse
Actually it does power on just can't see it...only when I plug it into my laptop will I know because of the sounds and Device Manager.
KennynGGG said:
Actually it does power on just can't see it...only when I plug it into my laptop will I know because of the sounds and Device Manager.
Click to expand...
Click to collapse
you must install Qualcomm driver to see your device in device manager as " Qualcomm qdloader 9008"
- but for now you can't do anything without jtag or box like Medusa or octopus.
Sent from my LGM-V300S using XDA Labs
---------- Post added at 07:42 PM ---------- Previous post was at 07:34 PM ----------
seloka180 said:
you must install Qualcomm driver to see your device in device manager as " Qualcomm qdloader 9008"
- but for now you can't do anything without jtag or box like Medusa or octopus.
Click to expand...
Click to collapse
edit :
I had the same problem and was fixed by "jtag" at a repair shop . but the wide camera not work now . it see camera not available.
Sent from my LGM-V300S using XDA Labs
seloka180 said:
you must install Qualcomm driver to see your device in device manager as " Qualcomm qdloader 9008"
- but for now you can't do anything without jtag or box like Medusa or octopus.
Sent from my LGM-V300S using XDA Labs
---------- Post added at 07:42 PM ---------- Previous post was at 07:34 PM ----------
edit :
I had the same problem and was fixed by "jtag" at a repair shop . but the wide camera not work now . it see camera not available.
Sent from my LGM-V300S using XDA Labs
Click to expand...
Click to collapse
Yeah I read about those. Wonder if there's any online service for I kinda of hesistate on mailing it out. Can you recommend any ?
KennynGGG said:
Yeah I read about those. Wonder if there's any online service for I kinda of hesistate on mailing it out. Can you recommend any ?
Click to expand...
Click to collapse
no I'm in algeria ?? sorry ?.
it's a local repair shop here in algeria.
Sent from my LGM-V300S using XDA Labs
iMoGGG said:
I managed to fix the phone using dump file created during FRP reset, thanks to help from Octoplus Team.
To repair your device do the following:
1. Select the model which you chose by mistake. In my case V300 instead of H930 in the list of Software.
2. Select backup file "Your dump file.dump" into the Firmware slot in Software. Should be saved in the Octoplus backup folder.
3. Press "Reset FRP (Qualcomm 9008)" button in Software and write back the backup file.
It is a rare situation but I hope it helps someone in the event they need it.
Click to expand...
Click to collapse
How did you get a dump ? I want to do the samething just in case...
https://www.ebay.com/itm/Remote-Ser...e=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649
I used his service personally for my Qualcomm 9008 US998_20H while crossflashing H930_30b as too impatient to wait for PIE. $37 with tax. Teamviewer used to remotely install drivers and software for JTAG writting using Octopus box remotely. Worked great. I highly recommend this guy, Tennolee
Related
I wanted to install the ClockworkMod and have inadvertently selected the wrong then the phone had been Hongen and now it will not boot, only a black screen and no recovery mode can any help myyyyyyyyyy ?
leinad1313 said:
I wanted to install the ClockworkMod and have inadvertently selected the wrong then the phone had been Hongen and now it will not boot, only a black screen and no recovery mode can any help myyyyyyyyyy ?
Click to expand...
Click to collapse
I have had the same thing by the same procedure to unlock bootloader and flash cwm ... :crying: :crying: :crying: help us
Try this: http://forum.xda-developers.com/showpost.php?p=36688645&postcount=808
PS.: If you can't get your phone in emergency mode (step 5) you can put in download mode instead. To get it in download mode press and hold volume down and up while you connect your usb cable to your pc
the phone does not go into any recovery mode (emergency) indeed, the PC recognizes it as USB\VID_05C6&PID_9008&REV_0000
Yet another brick. There should be a counter for this.
How do I reset the counter?
the samsung is reset with a simple jig... and lg phones?
same problem
mejinn said:
How do I reset the counter?
the samsung is reset with a simple jig... and lg phones?
Click to expand...
Click to collapse
I have the same problem... any idea?
thanks
mejinn said:
I have had the same thing by the same procedure to unlock bootloader and flash cwm ... :crying: :crying: :crying: help us
Click to expand...
Click to collapse
same problem ... on l7 ( does anyone unbrick his phone?
Flash the stock firmware
Sent from my LG-P880 using xda premium
No solution to this problem
I've tried everything.
The phone simply doesn't connect.
USB\VID_05C6&PID_9008&REV_0000
This is what I get when I connect the phone by USB.
I just cant get into emergency, DIAG or emergency CS
KDZ the phone connects and then I get a message afterwards PHONE NOT FOUND.
everytime I install the drivers by LG support tool, it keeps giving me the option to install the driver, like I havent done it a hundred times over.
I think there should be a driver somewhere that can be installed but the only people that have this driver are LG tech's. So they can bill you after
send the phone in cause you rooted it. So the one billion dollar question is witch hero will find a way to unbrick this device. We only need a way
to get a driver to install and we are home free. Or maybe the only other option is throwing the phone for sale on internet for spare parts:cyclops:
HELP PLEASE HELP find a way to unbrick this phone. Believe me I flashed and bricked alot of different phones and there was a way out but in
with this phone it seems impossible!!
---------- Post added at 04:02 PM ---------- Previous post was at 03:46 PM ----------
breakercris said:
I've tried everything.
The phone simply doesn't connect.
USB\VID_05C6&PID_9008&REV_0000
This is what I get when I connect the phone by USB.
I just cant get into emergency, DIAG or emergency CS
KDZ the phone connects and then I get a message afterwards PHONE NOT FOUND.
everytime I install the drivers by LG support tool, it keeps giving me the option to install the driver, like I havent done it a hundred times over.
I think there should be a driver somewhere that can be installed but the only people that have this driver are LG tech's. So they can bill you after
send the phone in cause you rooted it. So the one billion dollar question is witch hero will find a way to unbrick this device. We only need a way
to get a driver to install and we are home free. Or maybe the only other option is throwing the phone for sale on internet for spare parts:cyclops:
HELP PLEASE HELP find a way to unbrick this phone. Believe me I flashed and bricked alot of different phones and there was a way out but in
with this phone it seems impossible!!
Click to expand...
Click to collapse
And there is no mode to put it in in because te volume buttons don't do crap, the home button also, the only time that the phone does show up is when windows tells me it has an unknown device that I for the love of god can't find a driver for. I tried SDK, the LG drivers, but no dice:crying::crying::crying::crying::crying:
Sony st23i
Same chases with me, on my phone sony st23i, please help me, can anybody give me link for this chases???
Moto E is not displaying anything..Notification light blink once when long press power button or while connecting to usb cable..
But my PC detects the phone when connected..Device Manager showing Qualcomm HS-USB QDLoader 9008 .
PLEASE HELP!!!
UPDATED:
I heard that by using QFIL,all qualcomm mobiles could be flashed without fastboot..
Is it possible for MOTO E?
I am having exactly same issue with my Moto E XT1022
coder0000 said:
Moto E is not displaying anything..Notification light blink once when long press power button or while connecting to usb cable..
But my PC detects the phone when connected..Device Manager showing Qualcomm HS-USB QDLoader 9008 .
PLEASE HELP!!!
UPDATED:
I heard that by using QFIL,all qualcomm mobiles could be flashed without fastboot..
Is it possible for MOTO E?
Click to expand...
Click to collapse
Hi, I am having exactly the same issue with Moto E 1st Gen. I just want to if you were ever able to revive your mobile? Please do reply.
MusaddiqueAli said:
Hi, I am having exactly the same issue with Moto E 1st Gen. I just want to if you were ever able to revive your mobile? Please do reply.
Click to expand...
Click to collapse
No..Failed to make it work..
Okay. Thanks for the swift reply.
coder0000 said:
No..Failed to make it work..
Click to expand...
Click to collapse
But by the way, did you try the QFIL method.
MusaddiqueAli said:
But by the way, did you try the QFIL method.
Click to expand...
Click to collapse
Yes you can revive your phone through QFIL. I had. Lenovo a6000 plus and in case of hard brick (when you can't access recovery or fastboot), you can still revive your phone through the Diagnostics port. You need to have a ROW firmware file in my case. I don't have a link for your device. You have to search that for yourselves. But, I just want to give you some hope.
In case, you want to see how this works, you can see the 2nd method. Other methods might work too. CHECK OUT THIS LINK.
Okay. Thanks for the reply......
sasukay said:
Yes you can revive your phone through QFIL. I had. Lenovo a6000 plus and in case of hard brick (when you can't access recovery or fastboot), you can still revive your phone through the Diagnostics port. You need to have a ROW firmware file in my case. I don't have a link for your device. You have to search that for yourselves. But, I just want to give you some hope.
In case, you want to see how this works, you can see the 2nd method. Other methods might work too. CHECK OUT THIS LINK.
Click to expand...
Click to collapse
And, and about the ROW Firmware that you mentioned, I came to know that ROW is mostly in the case of Lenovo mobiles, whereas in case of Moto E, I didn't find anything with ROW firmware.
But, I would like to know that the ROW Firmware that you mentioned, is it in .zip file format or something else?
MusaddiqueAli said:
And, and about the ROW Firmware that you mentioned, I came to know that ROW is mostly in the case of Lenovo mobiles, whereas in case of Moto E, I didn't find anything with ROW firmware.
But, I would like to know that the ROW Firmware that you mentioned, is it in .zip file format or something else?
Click to expand...
Click to collapse
For me the format was .row only. I checked google for it and it's not so for others I guess. I've scoured some links for you, which might help, I'm not sure though. Specially, the firmware files, I don't know if these are what you need. But, you can have a look and atleast try unbricking your device. Good luck!
1) MOTO FIRMWARE FILES
2) Tutorial 1 (I would prefer this).
3) Tutorial 2
Thnaks.
sasukay said:
For me the format was .row only. I checked google for it and it's not so for others I guess. I've scoured some links for you, which might help, I'm not sure though. Specially, the firmware files, I don't know if these are what you need. But, you can have a look and atleast try unbricking your device. Good luck!
1) MOTO FIRMWARE FILES
2) Tutorial 1 (I would prefer this).
3) Tutorial 2
Click to expand...
Click to collapse
:good: Thank you very much for the links. I'll try those files. Hope it works.
One thing I am confident about now after my recent research online and here in XDA is that, my phone can be unbricked (whether QFIL method or otherwise) however severe the problem is.
MusaddiqueAli said:
:good: Thank you very much for the links. I'll try those files. Hope it works.
One thing I am confident about now after my recent research online and here in XDA is that, my phone can be unbricked (whether QFIL method or otherwise) however severe the problem is.
Click to expand...
Click to collapse
Plz Let me know if you succeed..
Please help Me.... I'm having the same problem.. Anyone found out the solution?
Can qfil be used?
If qfil can be used, please give me link for the. MBN, rawprogram0.xml and patch file for moto e xt1022
FIX suggestion
If anyone has another working Moto E then we just need to extract the internal backup which can be used to unbrick our phones. I'm trying from past 2 weeks to find a user with working moto e but couldn't find one..
If found please contact me..
Thank you.
coder0000 said:
Moto E is not displaying anything..Notification light blink once when long press power button or while connecting to usb cable..
But my PC detects the phone when connected..Device Manager showing Qualcomm HS-USB QDLoader 9008 .
PLEASE HELP!!!
UPDATED:
I heard that by using QFIL,all qualcomm mobiles could be flashed without fastboot..
Is it possible for MOTO E?
Click to expand...
Click to collapse
Am also having similar kind of problems with my Moto E, apart from the notification light blink once when long press the power button. In my case, notification light is blinking only when connected to charger.
Waiting for your problems to be resolved [emoji41]
Sent from my Lenovo P2a42 using Tapatalk
coder0000 said:
Moto E is not displaying anything..Notification light blink once when long press power button or while connecting to usb cable..
But my PC detects the phone when connected..Device Manager showing Qualcomm HS-USB QDLoader 9008 .
PLEASE HELP!!!
UPDATED:
I heard that by using QFIL,all qualcomm mobiles could be flashed without fastboot..
Is it possible for MOTO E?
Click to expand...
Click to collapse
Mine was also the same case , Downgraded to KitKat from lollipop received an OTA and bang! I got bricked!
My device gets detected as QUALCOMM HS-QDLOADER 9008 in COM ports which is also known as EMERGENCY DOWNLOAD MODE. I have rescued many phones from this incl. Nokia Lumia Devices(9006 and 9008)through Care Suite, Xiaomi devices but their Firmware allows them to flash from Emergency Download Mode.
But Motorola Has only released the FASTBOOT FIRMWARE which doesnt provide the way to Load FW in EDL mode, blank-flash files are leaked for the Moto G which does the same thing! But Blank-Flash are not available for Moto E which can resue you from Emergency DL mode . I tried using different tools like QPST an all but no luck.
The Solution till now is through JTAG/ATF recovery only which writes the eMMC through JTAG interface and RESTORES THE BOOT. It needs a specialised HW and can be done by a Mobile Technician for a small amount. This is the only solution i found though it was 1 yr ago
hi
my phone is bricked and as i unlocked the bl moto voids the warranty.
i need help if someone is ready to do the following:
Get an external MicroSD card with “exfat” system file, and the size of this SD card should be larger than 16 GB, which is the size of the whole partition.
Do a complete factory reset on the phone. If a custom recovery is installed, use it to wipe data, cache, and internal storage.
While the sdcard is in the phone, run the follow commands via adb
adb shell
su
dd if=/dev/block/mmcblk0 of=/storage/sdcard1/backup.img bs=512 count=30535646
The size of the backup.img is around 16 GB, However, if compressed would be about 2 GB
then upload the emmc image so i might have a chance to unbrick
using hdd raw copy tool
UPDATE 2017-feb-02:
moto replaced my unit
You should be more clear in what's your problem, what your situation and what you would try to do...
it's hard brick
no screen on
detected by computer as com port:
qualcomm hs-usb qdloader 9008
meaning u can only access it as described here:
https://www.leakite.com/2016/06/revised-how-to-unbrick-qualcomm-android.html
or here:http://www.androidbrick.com/unbrick...-you-have-the-right-kind-of-rom-qhsusb_dload/
reiteravi said:
it's hard brick
no screen on
detected by computer as com port:
qualcomm hs-usb qdloader 9008
meaning u can only access it as described here:
https://www.leakite.com/2016/06/revised-how-to-unbrick-qualcomm-android.html
or here:http://www.androidbrick.com/unbrick...-you-have-the-right-kind-of-rom-qhsusb_dload/
Click to expand...
Click to collapse
Oh man... How this could be happened exactly?
Anyway, instructions you provided could be right (I know quite all programs involved...), only some notes:
- it's better to use a just formatted PC to do the work (and be ready to reformat eventually). Use Windows 7 64 bit and Administrator user to have no hassle...
- it's not really needed to factory reset phone before backup command... Problem is that if someone don't, you'll restore all his private data too...
- external SD is not really needed as ext4... Even exFAT would be fine (only problem is the 4GB limit of FAT32). exFAT is even better because it could be read on Windows PC too (by who will send it to you...), while ext4 requires linux PC or some software on Windows...
Said that, I really can't, but there are A LOT of user here that are testing some firmware every day (read: e.g. testing for @janjan ) that can help you for sure... Stock software isn't really needed to unbrick: only a rooted working one is enough...
Good luck bro'...
thanks
data is no problem as u cannot access it anyway..
what i remeber is that i flashed retcn nougat
it booted and even id:n/a was reolaced with real id number
then wanted the us version so fastbooted verison system files
then rebooted to this brick
reiteravi said:
thanks
...then wanted the us version...
Click to expand...
Click to collapse
Same thing here... , please share if you solved it.
I took my moto to motocare, hopefully they can repair it or maybe apply warranty (finger crossed)
is your bl unlocked ?
plz report if they honor warranty
reiteravi said:
is your bl unlocked ?
plz report if they honor warranty
Click to expand...
Click to collapse
Yep BL unlocked, I know that unlocking it voids warranty but hope they do something :fingers-crossed:
Pal, put a short request and a link to this help thread in this discussion: http://forum.xda-developers.com/moto-z/development/twrp-ported-to-moto-z-eu-version-t3470920
There should be some people that could easily help there...
:good:
posted there
thanks
Lepezon
plz report how moto responded as i purchased mine in the uk
so sending there and back would cost some tens
would be nice to know i don't send it for nothing
reiteravi said:
it's hard brick
no screen on
detected by computer as com port:
qualcomm hs-usb qdloader 9008
meaning u can only access it as described here:
https://www.leakite.com/2016/06/revised-how-to-unbrick-qualcomm-android.html
or here:http://www.androidbrick.com/unbrick...-you-have-the-right-kind-of-rom-qhsusb_dload/
Click to expand...
Click to collapse
Did you followed these steps described in above links. I can take a look if you are close to my country Denmark. Can you boot in bootloader mod? Did you look at RSD ? Many possibilities there but difficult to help someone without the device. Hopefully you can solve your problem.
reiteravi said:
:good:
posted there
thanks
Lepezon
plz report how moto responded as i purchased mine in the uk
so sending there and back would cost some tens
would be nice to know i don't send it for nothing
Click to expand...
Click to collapse
Are you sure that's how it works, cause mine is also from UK, but I live in Poland, and the idea of sending it to the other side of the continent if something happens sound kind of silly to me, I mean, can't they just let you ship it to your closest Motorola service
no
i contacted mot us and they only deal with us units
had to contact moto uk
janjan
this brick means no screen
no bootloader or recovery mode
not fastboot or adb
only com port via qualcomm utility
reiteravi said:
:good:
posted there
thanks
Lepezon
plz report how moto responded as i purchased mine in the uk
so sending there and back would cost some tens
would be nice to know i don't send it for nothing
Click to expand...
Click to collapse
Yep I'll report
---------- Post added at 05:53 PM ---------- Previous post was at 05:09 PM ----------
Good news ! MOBO collaborates with Motorola here in mexico on repairing devices, I took my device to them and left it there for a couple of days. Today I phoned them to see the status, IT'S REPAIRED! :highfive:
thanks
will send it to moto then
hope uk are ok as mex
Is this issue resolved? If not may be I can assist you fix this issue. I too went through same steps.
it's not resolved
if u succeeded plz give some info how
i got sahara fail every time
Ok... You need to manually flash using fastboot command the firmware xt1650.246.45 (search blog you will find it, I can't remember link right now). Ignore any error messages while flashing.
After flashing, boot to recovery (stock recovery that was flashed manually earlier). Choose update from ADB, now sideload nougat firmware. After completion again boot to recovery and clear cache. Now you are done.
But your bootloader must be unlocked for this.
Thanks.
u missed big time
had i got any fastboot access then it was not bricked
unless u have found a way to fastboot in "qualcomm 9008 mode"
It's been hardbricked for almost a month now. I've looked everywhere on how to unbrick this specific model on XDA but didn't find anything.
I know it's been done for models like the V10, G3, etc.. so I thought there might be some hope from bringing my phone back to life.
I goofed up accidentally installing the wrong ROM for the phone. It had TWRP and all but the phone won't turn on at all.
Does anybody have system dump files for the RS988?
CP100 said:
It's been hardbricked for almost a month now. I've looked everywhere on how to unbrick this specific model on XDA but didn't find anything.
I know it's been done for models like the V10, G3, etc.. so I thought there might be some hope from bringing my phone back to life.
I goofed up accidentally installing the wrong ROM for the phone. It had TWRP and all but the phone won't turn on at all.
Does anybody have system dump files for the RS988?
Click to expand...
Click to collapse
Hello!
When you say that the phone won't turn on at all, do you mean that the LG logo does not appear when you attempt to turn it on? In any case, your phone seems to be recognized by your computer, so download LGUP (with UPPERCUT) and see if they can communicate. You can flash the stock firmware using the .kdz files linked by @autoprime in his All-in-One G5 thread. I believe the firmware made for the RS988 Brightpoint (BPT) variant doesn't have anti-rollback protection, so you'll have the most luck flashing it. Make sure, though, if you go that route, to flash the non-carrier firmware afterwards.
NextDroid said:
Hello!
When you say that the phone won't turn on at all, do you mean that the LG logo does not appear when you attempt to turn it on? In any case, your phone seems to be recognized by your computer, so download LGUP (with UPPERCUT) and see if they can communicate. You can flash the stock firmware using the .kdz files linked by @autoprime in his All-in-One G5 thread. I believe the firmware made for the RS988 Brightpoint (BPT) variant doesn't have anti-rollback protection, so you'll have the most luck flashing it. Make sure, though, if you go that route, to flash the non-carrier firmware afterwards.
Click to expand...
Click to collapse
The Logo doesn't appear, after being plugged in to my PC, it just gets a little warm.
As for the LGUP with uppercut, I ran the program and it gives me a message of it saying "no handset connected". It is currently on COM3 in device manager named "Qualcomm HS-USB QDLoader 9008".
CP100 said:
The Logo doesn't appear, after being plugged in to my PC, it just gets a little warm.
As for the LGUP with uppercut, I ran the program and it gives me a message of it saying "no handset connected". It is currently on COM3 in device manager named "Qualcomm HS-USB QDLoader 9008".
Click to expand...
Click to collapse
Interesting. This reminds me of APX mode from the NVIDIA Tegra devices.
I think there's a Qualcomm-developed firmware flashing tool that can detect the device via the COM3 port. I cannot recall the name, but if you find it, you should give it a try.
I also have same issue flashed wrong Rom showing qualcomm 9008,complete black screen not even showing charging also,no recovery mode no download mode.is there any solution for it.
balu9999 said:
I also have same issue flashed wrong Rom showing qualcomm 9008,complete black screen not even showing charging also,no recovery mode no download mode.is there any solution for it.
Click to expand...
Click to collapse
I don't know if they exist. You need qfil and whatever firmware parts and edl recovery files. Your fire hose programmer for your chipset.
I've read some guys claim sd card method. But I've never done it on this device
Where you ever able to unbrick the phone?
I am currently experiencing the same issue, the best method that would seem to work so far is through QFIL but I can't find the firehose file.
same problem, any help?
CP100 said:
It's been hardbricked for almost a month now. I've looked everywhere on how to unbrick this specific model on XDA but didn't find anything.
I know it's been done for models like the V10, G3, etc.. so I thought there might be some hope from bringing my phone back to life.
I goofed up accidentally installing the wrong ROM for the phone. It had TWRP and all but the phone won't turn on at all.
Does anybody have system dump files for the RS988?
Click to expand...
Click to collapse
I have the exact same problem but i have the h850
Hello! I have a bricked OnePlus Nord N200 5G with me, and I'm pretty sure I have tried everything at this point.
I mistakenly downloaded the N100 firmware files, namely XBL, ABOOT, and TZ and flashed them through fastboot, and came back to a nice looking brick on reboot.
MSM Download Tool or EDL should be able to save the phone, in theory, but even with the correct programmer, it won't take a flash of any kind. I have tried the global firmware, the T-Mobile firmware, tried Windows and Linux with QPST and EDL respectively, and can't get the phone to do anything.
Almost as if it is crashing halfway through firehose upload?
Would it be possible to short UFS through the board perhaps, maybe it's trying to crosscheck N200 files with N100? But PBL being in bootROM should take a flash with the correct programmer, right?
To be upfront about it too, if this phone is perma-dead, so be it. I have a lot of free time on my hands at the moment and wanted to try and revive it if possible. I'd appreciate anyone chiming in. Thanks!
do you have a screenshot of what the phone driver looks like in device manager when in EDL mode?
do you have a screenshot of what MSM download tool status looks like right before you click START?
AiM2LeaRn said:
do you have a screenshot of what the phone driver looks like in device manager when in EDL mode?
do you have a screenshot of what MSM download tool status looks like right before you click START?
Click to expand...
Click to collapse
I don't have any screenshots, however I installed the drivers correctly, phone on Windows shows up as Qualcomm 9008 COM Port. As for MSM Tool, I have tried messing with the SHA and lite and reboot options, to no avail.
I currently run Arch Linux, and bum family's Windows PC for flashing.
If you need any Linux screenshots, I have those.
have you tried a different USB cable?
different USB port?
and/or different computer?
AiM2LeaRn said:
have you tried a different USB cable?
different USB port?
and/or different computer?
Click to expand...
Click to collapse
Yeah, I have tried an Intel based Linux machine and a Ryzen based Windows machine, tried different cables, even made a DIY EDL cable where I short DAT+ with GND.
yea sounds like you been doing the right things, well im sorry but thats beyond my knowledge, sounds like you really did something unusual and changed up the wrong boot files, usually MSM download tools works. Good luck.
AiM2LeaRn said:
yea sounds like you been doing the right things, well im sorry but thats beyond my knowledge, sounds like you really did something unusual and changed up the wrong boot files, usually MSM download tools works. Good luck.
Click to expand...
Click to collapse
Thanks for the help either way. Maybe someone who has messed with EDL more than I will come across this with some new info...
DaKillaz98 said:
Thanks for the help either way. Maybe someone who has messed with EDL more than I will come across this with some new info...
Click to expand...
Click to collapse
out of curosity in windows devie manager is is EXACTLY saying "Qualcomm HS-USB QDLoader 9008 (COM)" or is it just saying exactly "Qualcomm 9008"?
another question: when you are in EDL mode what is showing on the phone screen?
It says Qualcomm HS-USB QDLoader 9008 (COM) exactly, I just couldn't think of how to type it off the top of my head.
Phone shows nothing, no vibrate, no screen. Doesn't boot or show any signs of life.
DaKillaz98 said:
It says Qualcomm HS-USB QDLoader 9008 (COM) exactly, I just couldn't think of how to type it off the top of my head.
Phone shows nothing, no vibrate, no screen. Doesn't boot or show any signs of life.
Click to expand...
Click to collapse
sounds like you pulled a number on it, good luck!
DaKillaz98 said:
It says Qualcomm HS-USB QDLoader 9008 (COM) exactly, I just couldn't think of how to type it off the top of my head.
Phone shows nothing, no vibrate, no screen. Doesn't boot or show any signs of life.
Click to expand...
Click to collapse
try this: https://github.com/bkerler/edl
it's an universal blankflash tool that allows you to flash every single partition individually.
WoKoschekk said:
try this: https://github.com/bkerler/edl
it's an universal blankflash tool that allows you to flash every single partition individually.
Click to expand...
Click to collapse
I've tried this tool,
Code:
edl --memory=ufs --debugmode --loader='/home/austen/Desktop/Phone Repair/0000000000515152_07b00c8737956b3d_fhprg_dre8t.bin' qfil '/home/austen/Desktop/Phone Repair/Firmware/extract/rawprogram0.xml' '/home/austen/Desktop/Phone Repair/Firmware/extract/patch0.xml' '/home/austen/Desktop/Phone Repair/Firmware/extract'
showed me that it is crashing halfway through the programmer upload. I get "Cannot receive number of program headers." when I send a bad programmer, as expected.
I made my own rawprogram0.xml and patch0.xml using the settings.xml to flash XBL and such, but didn't even get that far.
I'm going to try a clean Windows 10 VM, just to make sure this isn't a Windows 11 issue maybe.
DaKillaz98 said:
I've tried this tool,
Code:
edl --memory=ufs --debugmode --loader='/home/austen/Desktop/Phone Repair/0000000000515152_07b00c8737956b3d_fhprg_dre8t.bin' qfil '/home/austen/Desktop/Phone Repair/Firmware/extract/rawprogram0.xml' '/home/austen/Desktop/Phone Repair/Firmware/extract/patch0.xml' '/home/austen/Desktop/Phone Repair/Firmware/extract'
showed me that it is crashing halfway through the programmer upload. I get "Cannot receive number of program headers." when I send a bad programmer, as expected.
I made my own rawprogram0.xml and patch0.xml using the settings.xml to flash XBL and such, but didn't even get that far.
I'm going to try a clean Windows 10 VM, just to make sure this isn't a Windows 11 issue maybe.
Click to expand...
Click to collapse
you can also try a loader provided by the tool. it helped me to recover my Moto phone.
WoKoschekk said:
you can also try a loader provided by the tool. it helped me to recover my Moto phone.
Click to expand...
Click to collapse
That's the loader I used at first actually, I also tried one extracted from stock firmware, but no dice, trying a windows vm soon.