I'm not able to flash any custom ROM..
I had flashed before but then I came back to stock and now it just doesn't work..
I first tried RR ROM it flashes and in end says unmount of /system failed (which I know can be ignored.) when I boot it just remains in boot animation.
Then I tried Ashwins cm13 again same.. It just stays in animation.
Then Cm 12.1 and it also stays in animation.. I also wiped internal thinking maybe it would help but it didn't..
At last I flashed stock and it just flashes fiine and boots..
Note : I'm using TWRP 3.0.0-1 the official one..
Any help would be appreciated
Sent from my ONE E1003 using Tapatalk
hey if u are on stock.i guess u again installed twrp and r rooted.
the reason is that u need to go to advanced wipe.check dalvik,cache,data,system..wipe.dont touch internal and micro sd if u want to save your data.then go back and try the install again.let me know if its successful
sand87ch said:
hey if u are on stock.i guess u again installed twrp and r rooted.
the reason is that u need to go to advanced wipe.check dalvik,cache,data,system..wipe.dont touch internal and micro sd if u want to save your data.then go back and try the install again.let me know if its successful
Click to expand...
Click to collapse
Dude.. I always do the same.. I also wiped internal.. (Already mentioned..). Thanks for replying.
Sent from my ONE E1003 using Tapatalk
sarthakspiker said:
Dude.. I always do the same.. I also wiped internal.. (Already mentioned..). Thanks for replying.
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
could you try with twrp 2.8.7.0...which i guess is the older version.i think i read smwhr in this forum that the latest twrp has issues.not sure abt that but do try the above version
sand87ch said:
could you try with twrp 2.8.7.0...which i guess is the older version.i think i read smwhr in this forum that the latest twrp has issues.not sure abt that but do try the above version
Click to expand...
Click to collapse
I don't really think that should be am issue.. Coz stock is working just fine.. And I was already planning it.. Just did a twrp back hope .
Sent from my ONE E1003 using Tapatalk
Damn.. TWRP 2.7.8.0 just solved it... So there are issues in 3.0.0-1
Sent from my OnePlus X using Tapatalk
sarthakspiker said:
Damn.. TWRP 2.7.8.0 just solved it... So there are issues in 3.0.0-1
Sent from my OnePlus X using Tapatalk
Click to expand...
Click to collapse
great to know
If there are issues with TWRP, you seem to be the only one experiencing them.
Flash the full stock ROM and start from the beginning.
TWRP has gone official, so there's no use posting on eng.stk's kernel thread about it.
Related
http://www.youtube.com/watch?v=AgTKl_TJRAI&feature=youtu.be
can anyone help me?
already did custom firmware/stock flashing but still failed.
At least its not bricked , did you do full wipes ? With installs ?
Sent from my SAMSUNG-SGH-T989 using xda premium
yes , i dont know what's the problem , did repartitioning and flashed CF root , custom roms. i dont know whats wrong .
what do you think?
cuddlemybowel said:
yes , i dont know what's the problem , did repartitioning and flashed CF root , custom roms. i dont know whats wrong .
what do you think?
Click to expand...
Click to collapse
Try a different kernel ? Maybe I know ive had issues with some roms but flashing a kernel sometimes helps , u said u tried stock already ?
Sent from my SAMSUNG-SGH-T989 using xda premium
funziebear said:
Try a different kernel ? Maybe I know ive had issues with some roms but flashing a kernel sometimes helps , u said u tried stock already ?
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
already did , flashed Siyah . didnt work, stock didnt work also
Try going into cwm and format everithing in advanced menu, including sdcard.
After formating everithing, go into download mode and flash a stock rom.
This should work...
Sent from my Transformer TF101 using Tapatalk 2
Have you tried Odin a stock rom ? Or are u just going thru recovery o your phone ?
Sent from my SAMSUNG-SGH-T989 using xda premium
AllanJacques said:
Try going into cwm and format everithing in advanced menu, including sdcard.
After formating everithing, go into download mode and flash a stock rom.
This should work...
Sent from my Transformer TF101 using Tapatalk 2
Click to expand...
Click to collapse
i already did. even tried to install custom rom , loads at the animation but phone shuts down before it is completed.
could it be a hardware problem though?
Try to make a full wipe ... etc also format system and fix permission when all done ...
go to download mode and flash a stock rom ... if u can't flash a stock rom then flash a kernel first then u should be able to flash a stock rom with odin ...
Harchaoui said:
Try to make a full wipe ... etc also format system and fix permission when all done ...
go to download mode and flash a stock rom ... if u can't flash a stock rom then flash a kernel first then u should be able to flash a stock rom with odin ...
Click to expand...
Click to collapse
i can flash anything but still it doesn't work. on gingerbread i can almost go as far as on the video . But when i flash ICS stock rom it could go to the S2 animation before it shuts down.
I had some problem..
I solved changing just the kernel and it started working again, just use Odin..
ALready changed kernel still aint working. ALso when in CWM , it says cant unmount emmc ,what does this mean? And on android recovery idit says install preload customer failed something like te thathat
Seems like faulty hardware for me...
Sent from my Transformer TF101 using Tapatalk 2
damn
so there's no chance left?
cuddlemybowel said:
so there's no chance left?
Click to expand...
Click to collapse
Boot loop. Can most commonly be fixed by flashing stock firmware for your phone.
Can you confirm the model of your phone? I know the boot screen says GT-I9100, but what is printed on the label under your battery?
it says i9100 also so there's nothing wrong when choosing rom. do you know if -rw mounting has anything to do with this?
I had the same problem , wiped cache and dalvik cache and wiped data then installed jb compatible siyah and Rootbox jb 2.3 .. then my phone booted up
in ur case .. U have messed something up with a root app , and u will be able to flash slim ics and jb roms .. Other roms will give u a boot loop
Dont install a 4.0.4 rom and wipe anything .. Coz this will result in a hardbrick .. So be careful!!!
sent from my SGSII
cuddlemybowel said:
it says i9100 also so there's nothing wrong when choosing rom. do you know if -rw mounting has anything to do with this?
Click to expand...
Click to collapse
Your phone looks like soft brick.
Visit this thread for solution:
forum.xda-developers.com/showthread.php?t=1457458
Good luck
Swyped from my Samsung Galaxy SII
tried that
didnt work.
cuddlemybowel said:
didnt work.
Click to expand...
Click to collapse
what's the error you encountered?
Swyped from my Samsung Galaxy SII
what i did was i followed hanzoo guide about unlocking bootloader and then when i already unlocked and have a cwm international installed and supersu i followed his guide on how to flash a rom so im hyped to try my first custom rom i went to recovery made a backup and downloaded this rom ROM 05/2/13 Cm10.1 4.2.1 hox+ international, first i backup then i "click Wipe. Wipe Cache, Dalvik, Factory Reset and System" and then i flash this zip in recovery and installed the rom and i forgot to install the gapps 4.2 now im stuck in the cynogenmod logo. can i still fix this please help!
Flash the correct kernel
Notechis said:
Flash the correct kernel
Click to expand...
Click to collapse
which kernel sir please help i dunno which one i should download so im scared im might never use my phone again,,
http://goo.im/devs/maxwen/BLADE/boot-BLADE-CM10.1-201302241749.img
FOLLOW THIS THREAD
http://forum.xda-developers.com/showthread.php?t=2027201
Notechis said:
http://goo.im/devs/maxwen/BLADE/boot-BLADE-CM10.1-201302241749.img
FOLLOW THIS THREAD
http://forum.xda-developers.com/showthread.php?t=2027201
Click to expand...
Click to collapse
sir just a question should i use hanzoo all in one kit to flash that kernel? because i dont have that TWRP recovery.
Yes, use the toolkit to flash a kernel.
Always use a custom recovery like TWRP or CWM to make a backup before flashing something - 1 st RULE
Notechis said:
Yes, use the toolkit to flash a kernel.
Always use a custom recovery like TWRP or CWM to make a backup before flashing something - 1 st RULE
Click to expand...
Click to collapse
thank you so much my phone is working now, uhm after this how can i install twrp sir
Download it and flash it, using the toolkit,too.
- use the right version
Notechis said:
Download it and flash it, using the toolkit,too.
- use the right version
Click to expand...
Click to collapse
Half the issues you guys have, is cause you use toolkits n such to do the simplest of tasks like flash a kernel.
Sent from my HTC One X+ using Tapatalk 2
AndroHero said:
Half the issues you guys have, is cause you use toolkits n such to do the simplest of tasks like flash a kernel.
Sent from my HTC One X+ using Tapatalk 2
Click to expand...
Click to collapse
i agree it just over complicates things, just a simple adb\fastboot command and done..
fastboot is a whole lot easier.
Sent from my HTC One X+ using xda premium
Installed MESA HYBRID 4.3 Yesterday and i am not able to install any CM10/10.1 based ROM
Whether it be PACman/CM/AOKP or the unofficial Cm10.1 by shufuking.
Everytime i try to install any rom except Stock based ICS Rom's I get a STATUS 7 error
Tried removing the first three lines from the updater script and it still dosent work
Re: Trouble installing CM10./10.1
Million threads on status 7 error, give some of them a read.
Sent from Myushi
Been there,done that
Tried everything before posting
Thats the only reason I posted it here on XDA
BTW,ICS ROMs install fine...all of em actually !
antechx said:
Been there,done that
Click to expand...
Click to collapse
You've only listed one thing you've tried, but if you have tried everything else then god knows.
status 7 error means you formatted the system. Never format system. Try a google search. you will get xda links of people explaining how to recover from that.
http://forum.xda-developers.com/showthread.php?t=1884746
this thread will help.
dekanayanjyoti said:
status 7 error means you formatted the system. Never format system. Try a google search. you will get xda links of people explaining how to recover from that.
http://forum.xda-developers.com/showthread.php?t=1884746
this thread will help.
Click to expand...
Click to collapse
Thanks for the help , but unfortunately this didnt helped me either...
Tried installing the ROM without Formatting the system while wiped the data and cache .
Still gives me the ****ty status 7 error .
@XperienceD - Even tried FXP 213 and MIUI 142.
Gives the same error.
Re: Trouble installing CM10./10.1
This happens to me too.
So the best solution for now. Flash the roms you want using the provided kernel.
Then take a backup, flash Mesa, switch between roms via restoring them from recovery.
I do so
Sent from my ST15i using xda app-developers app
Mysteryagr said:
This happens to me too.
So the best solution for now. Flash the roms you want using the provided kernel.
Then take a backup, flash Mesa, switch between roms via restoring them from recovery.
I do so
Sent from my ST15i using xda app-developers app
Click to expand...
Click to collapse
I know that will work, but I really wanted a workaround for this :/
Switching kernels every time isn't a solution after all
You dont delete system for first instal JB
SalyczeQ said:
You dont delete system for first instal JB
Click to expand...
Click to collapse
Still gives the error :[
Got any other solutions ?
antechx said:
Still gives the error :[
Got any other solutions ?
Click to expand...
Click to collapse
I had this problem as well. I searched through google and found out the solution is to flash a newer version of CWM which actually worked for me. I couldn't find a separate package with CWM but I found a kernel containing it. Everything has been fine since then.
Trzepaczka said:
I had this problem as well. I searched through google and found out the solution is to flash a newer version of CWM which actually worked for me. I couldn't find a separate package with CWM but I found a kernel containing it. Everything has been fine since then.
Click to expand...
Click to collapse
Flashed to a newer version of CWM ?
I guess MESA already has CWM6.xx
You found a kernel containing it means ? Most of the kernels already use CWM as default recovery I guess
antechx said:
Flashed to a newer version of CWM ?
I guess MESA already has CWM6.xx
You found a kernel containing it means ? Most of the kernels already use CWM as default recovery I guess
Click to expand...
Click to collapse
Lupus uses twrp, actually the newer kernels come either as dual or with twrp.
mnishamk said:
Lupus uses twrp, actually the newer kernels come either as dual or with twrp.
Click to expand...
Click to collapse
MESA also uses dual recoveries and TWRP as default.
What did he exactly meant ?
Flash another CWM on top of the pre-installed recovery ?
?? Anyone ? knows how to update CWM ?
antechx said:
?? Anyone ? knows how to update CWM ?
Click to expand...
Click to collapse
if you have unlocked bootloader, try some of the kernels which use newer cwm or twrp.
if on locked, i think xparts installs latest cwm.
antechx said:
Still gives the error :[
Got any other solutions ?
Click to expand...
Click to collapse
Flash boot.img (in the zip by rom)
Install Zip
Install Gapps
Wipe data (do this first and only once and never do it again)
then flash custom kernels ..
mnishamk said:
Lupus uses twrp, actually the newer kernels come either as dual or with twrp.
Click to expand...
Click to collapse
!I hope not cause twrp only,are bad news
Actually will not happen cause this recovery has problems with our phones
Sent from my ST15i using xda app-developers asp
TWRP has problems with our the 2011MDPI's ?
antechx said:
TWRP has problems with our the 2011MDPI's ?
Click to expand...
Click to collapse
no
---------- Post added at 09:41 PM ---------- Previous post was at 09:37 PM ----------
aftergr said:
!I hope not cause twrp only,are bad news
Actually will not happen cause this recovery has problems with our phones
Sent from my ST15i using xda app-developers asp
Click to expand...
Click to collapse
i m using lupus twrp,no problem
I haven't had this error till today! I was flashing DarkRom 2.5 and following its procedure for flashing. When i tried to factory reset via CWM recovery I got this error " error mounting /emmc/ .android_secure " .
I searched Google for fixes. Many had recommended to format the internal memory but again many mentioned it is not safe to format internal SD.
I am using SlidingXP v9 stable.
Any suggestions?
Edit: it gets stuck at Sony logo if i flash DarkRom v2.5
reflash back to stock rom.. via flashtool if possible (not sure if it can be done on Xperia to prevent doing brick.. ujff)
me too i have seem problem
xperia P works fine but i cannot format emmc partition
BlackRainX said:
reflash back to stock rom.. via flashtool if possible (not sure if it can be done on Xperia to prevent doing brick.. ujff)
Click to expand...
Click to collapse
I did, many times!!
But this problem still exists!!
I am gonna try different kernel and see if iy helps!
edit: nope flashing another kernel didn't help.. i formatted my internal memory but that didn't help either..
Sent from my LT22i using Tapatalk 2
that's the kernel related problem bro even in Phantom and Sliding cause the CWM is the same!This is probably due the CWM problem.
Xperia_Fans said:
that's the kernel related problem bro even in Phantom and Sliding cause the CWM is the same!This is probably due the CWM problem.
Click to expand...
Click to collapse
Yea I finally figured it out! new version of CWM recovery gives this problem!
Thanks!
Sent from my LT22i using Tapatalk 2
i got the same problem with the sliding v9 kernel. i dont know how to fix this :/
SupaaRoxxa said:
i got the same problem with the sliding v9 kernel. i dont know how to fix this :/
Click to expand...
Click to collapse
This problem is caused my Phil's kernel. Flash the standard cwm kernel and you'll fix it! You can find it on dark rom 2.5 thread!!
Here flash the recovery mentioned here. This should fix the problem! http://forum.xda-developers.com/showthread.php?p=34812923
Sent from my LT22i using Tapatalk 2
AmG77 said:
This problem is caused my Phil's kernel. Flash the standard cwm kernel and you'll fix it! You can find it on dark rom 2.5 thread!!
Here flash the recovery mentioned here. This should fix the problem! http://forum.xda-developers.com/showthread.php?p=34812923
Sent from my LT22i using Tapatalk 2
Click to expand...
Click to collapse
the link u have given is for ics rom. Wat about JB? I'm also facing this problem and another problem i'm facing is unable to play games like fifa14, sims..which have sd files. Games like subway surfers and temple run work fine.....can anyone help me please....
I had this problem in other kernels, but in latest Nemesis kernel 6.1 (6.2 released yesterday) I tend to relieve from the problem.
Hi people i wouldnt have posted this but the problem is getting serious
Whenever i try to install any marshmallow rom in my Moto E,the device gets a bootloop ( cm 13)
Can anyone please help me out
Maybe i am doing something wrong
Thanks in advance
Mythdroid said:
Hi people i wouldnt have posted this but the problem is getting serious
Whenever i try to install any marshmallow rom in my Moto E,the device gets a bootloop ( cm 13)
Can anyone please help me out
Maybe i am doing something wrong
Thanks in advance
Click to expand...
Click to collapse
Which recovery are you using ???? .. secondly.....do clean flash if you arent
Sent from my Moto E using Tapatalk
Abhimanyu Shekhawat 121 said:
Which recovery are you using ???? .. secondly.....do clean flash if you arent
Sent from my Moto E using Tapatalk
Click to expand...
Click to collapse
i am using twrp 2.7.0.0 and yes i did a clean flash
Use latest 3.0.2 ....it's because of recovery ...I faced same issue earlier .....or you can go to mount option of recovery and then select system and after this flash rom
Sent from my Moto E using Tapatalk
Abhimanyu Shekhawat 121 said:
Use latest 3.0.2 ....it's because of recovery ...I faced same issue earlier .....or you can go to mount option of recovery and then select system and after this flash rom
Sent from my Moto E using Tapatalk
Click to expand...
Click to collapse
Can i do it using twrp manager ?
Mythdroid said:
Can i do it using twrp manager ?
Click to expand...
Click to collapse
Yes
Sent from my Moto E using Tapatalk
Abhimanyu Shekhawat 121 said:
Yes
Sent from my Moto E using Tapatalk
Click to expand...
Click to collapse
didnt work dude :crying:
Mythdroid said:
didnt work dude :crying:
Click to expand...
Click to collapse
Try flashing twrp 3.0.2 from flashify or using adb
drs22 said:
Try flashing twrp 3.0.2 from flashify or using adb
Click to expand...
Click to collapse
+1
Sent from my Moto E using Tapatalk
drs22 said:
Try flashing twrp 3.0.2 from flashify or using adb
Click to expand...
Click to collapse
recovery is updated but still cm 13 not booting up
i waited for 45 mins for it but still it didnt boot up
battery dropped from 90 to 23%
i flashed the latest build along with nano gapps and supersu
Mythdroid said:
recovery is updated but still cm 13 not booting up
i waited for 45 mins for it but still it didnt boot up
battery dropped from 90 to 23%
i flashed the latest build along with nano gapps and supersu
Click to expand...
Click to collapse
Which su version?
Try flashing just the rom. If it boots up, then clean flash the rom again along with gapps
If no ROM is booting up, then here is what you can try.
Flash CM11, its kitkat based. It brings back some parts of firmware to stock. I don't know why it works but it works for me. It has happened with me for like 2-3 times in an year where even the stable ROMs which i flashed previously worked but did not boot when flashed after some time.
So, if you are sure it is not ROM's problem then try flashing CM11. One more thing, flash stock 5.1 ROM for at least one time. I had similar issue when I unlocked my friend's moto e bootloader on kitkat and installed lollipop based ROM. It didn't boot. Then I flashed Lollipop stock ROM first.
If your phone was on Lollipop stock ROM at least once and still you are getting bootloop then try flashing CM11. Also just flash ROM first, without any gapps or SuperSU.
Mythdroid said:
recovery is updated but still cm 13 not booting up
i waited for 45 mins for it but still it didnt boot up
battery dropped from 90 to 23%
i flashed the latest build along with nano gapps and supersu
Click to expand...
Click to collapse
So you are now on 3.0.2 first check if zip is corrupt or not and secondly try flashing some other rom
Sent from my Moto E using Tapatalk