Related
So after experiencing first hand the poor figment of any tempered glass screen protectors I have deiced to create this OP. I have purchased 3 types of plastic screen protectors from amazon to see which if any will be a suitable replacement. I figured if I buy some and they are terrible I can always return them.
1. Mr Shield clear:
http://www.amazon.com/gp/aw/d/B00OD...416363968&sr=8-1-spell&pi=AC_SX110_SY165_QL70
I had high hopes for these after buying them for my Nexus 9 and having s good experience. The ones for the Nexus 6 are a far different story. The fitting is so poor they cant cover my display. I believe that these were cut very poorly because you can't align them properly to fit even with their tiny size. They have a nice feel and are easy to swipe back and forth on while using the office but if they can't protect my screen then there's no point in having it. (Pictures coming soon)
2. iSmooth:
http://www.amazon.com/gp/aw/d/B00O3OSBHI/ref=mp_s_a_1_1?qid=1416364063&sr=8-1&pi=AC_SY200_QL40
3. icarez: (coming Wednesday)
These looks just the the Mr Shield screen protectors above, except they are packaged better and come with better instructions. The downside is that they are again cut very small. I have learned that this is due to the curved nature that the ends of the display have, but its rather unfortunate that we are left with a screen that can't be fully protected. These also have a better feeling that the Mr. Shield protectors.
4. Spigen Crystal:
http://www.amazon.com/Protector-Spi...533171&sr=8-1&keywords=spigen+crystal+nexus+6
These are the best plastic screen protectors by a long shot. The fit and finish is far superior to any of the other brands that I have tried thus far. They are very thin compared to the other 3 I tried above. The costing allowing your fingers to slide across it with ease for people who prefer the gesture typing. The screen protector does cover the camera, and proximity sensor. Don't let this discourage you because they both work fine on my phone. The fit is much closer to the curves without causing issues. There is a fix for people with proximity sensor issues in the tempered glass OP. I would recommend these to anyone who wants a nice quality screen protector.
Update: from what I have seen, the Spigen is still your best bet. I have a couple as backups and I couldn't be happier. TG has been and still is very hit and miss but you can't go wrong with the Spigen Crystal screen protectors. I have no issues with my proximity sensor for FFC and its the only screen protector I've used since discovering it.
feel free to add your own choices and a brief description about the quality and whether or not you would recommend it.
I got the iSmooth protectors. A little difficult to install, but quite good once they're on. They feel almost like glass, they have a coating on them to prevent fingerprints too.
ryude said:
I got the iSmooth protectors. A little difficult to install, but quite good once they're on. They feel almost like glass, they have a coating on them to prevent fingerprints too.
Click to expand...
Click to collapse
This Review differs, http://www.amazon.com/Google-Nexus-...tBy=bySubmissionDateDescending#R1XWOBSF3898N4
What is your opinion?
Cheetohz said:
This Review differs, http://www.amazon.com/Google-Nexus-...tBy=bySubmissionDateDescending#R1XWOBSF3898N4
What is your opinion?
Click to expand...
Click to collapse
Pretty sure the cutout isn't for the camera, but the ambient sensor.
i ordered the invisible defenders. should be here tomorrow just ahead of the phone. never used them before as i've always gone with spigen, but since they're not shipping until next week i went with these. from a spec perspective, they sound every bit as good as the spigen crystals. i'll find out tomorrow/friday
http://www.amazon.com/gp/product/B00NU7DMC8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
indianajonze said:
i ordered the invisible defenders. should be here tomorrow just ahead of the phone. never used them before as i've always gone with spigen, but since they're not shipping until next week i went with these. from a spec perspective, they sound every bit as good as the spigen crystals. i'll find out tomorrow/friday
http://www.amazon.com/gp/product/B00NU7DMC8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Let us know how they are. The Spigen ones are good from past experience ( I won't buy their TG again) I hope they are offered with prime to make shipping faster.
I was planning on getting a glass protector, but after reading several posts here I see that is a bad idea.
I normally bought Zagg with my S4, but I'm not really sure what kind I want to get with my new Nexus 6. I absolutely HATE finger prints so anything that gets them easy is a no go for me.
for anyone that bought from SuperShieldz on amazon they just sent me this:
Dear Customer
We would like to inform you that the nexus 6 screen protector we sent to you is incorrect for the camera lens. The proper one will be send to you on Next Monday. Sorry and we apologize for any inconvenience.
Best Regards,
Ann
I would stay away from the iSmooth screen protectors. Received mine today and they are not properly aligned for the front camera as the protector covers it. Only reason I'm not returning is because I need something on the phone until the other screen protectors I ordered arrive.
My Xtreme Guards had the wrong camera cutout also. If all these companies have the wrong cutout, were they given the incorrect dimensions from Motorola when they all started cutting these out?
PaisanNYC said:
My Xtreme Guards had the wrong camera cutout also. If all these companies have the wrong cutout, were they given the incorrect dimensions from Motorola when they all started cutting these out?
Click to expand...
Click to collapse
According to iSmooth, yes that's exactly what happened.
Thank you for purchasing our Nexus 6 screen protectors and writing a review on your experience with them. I sincerely apologize for the inconvenience you have experienced thus far with our product. Since we are extremely fanatical about our customers, I wanted to reply back to you so I could explain the errors behind the engineering of the Google Nexus 6 screen protectors.
I will point out that in order for us to get to market by the Nexus 6's launch date sometimes we have to make an educated guess with our screen protectors. This time, we failed with our cutout design.
Below are the key points that will point out where our screen protectors were either botched or made to fit this new device and the reasoning behind it:
1.) The cutout for the camera is a full camera width to the left of the actual camera -- this is obviously a mistake. However, the clarity of the screen protector will still insure that the camera is NOT affected by the screen protector. It is just customary that the cutouts exist. However, there will still be a little notch for no reason on your screen protector. We sincerely apologize for this error.
2.) The screen protector will NOT go "edge-to-edge" but that was done on purpose as there is a curved edge on the Nexus 6.
3.) If it did go "edge-to-edge", then the screen protector will lift up on the edges as it would not properly adhere to the curved edges.
4.) We decided that 95% coverage on the phone was better than having faulty screen protectors.
5.) Our screen protectors were also meant to work with cases which means if we DID cover the edges of the screen, then the case would force the screen protector to lift and cause a lot of bubbling and ruin the screen protector.
Please know that getting a revised cut of our Nexus 6 screen protectors is top priority at iSmooth - our customers are our #1.
If you would like to receive these updated screen protector cuts when we receive them, please email [email protected] with your name, mailing address and Order Number. When we receive them we will promptly email you and mail those corrected screen protector replacements out post haste with absolutely NO charge to you.
Or, should you need anything else or have any other concerns at all, kindly contact me at that same email address - I sincerely want to help and make this situation right by you.
Have a nice Wednesday and I hope to talk to you soon,
Channele
Customer Support Manager
Click to expand...
Click to collapse
I'm updating the OP it appears like there will be no good screen protectors that are edge to edge with the exception of wet install ones which are a nightmare. I wouldn't risk a wet install with FF speakers but that's just me. I may just get a dbrand front skin to cover the gaps.
Pilz said:
I'm updating the OP it appears like there will be no good screen protectors that are edge to edge with the exception of wet install ones which are a nightmare. I wouldn't risk a wet install with FF speakers but that's just me. I may just get a dbrand front skin to cover the gaps.
Click to expand...
Click to collapse
I never even thought about that. I liked the Zagg ones but on my S4 there isn't front facing speakers.
Zenzr said:
I never even thought about that. I liked the Zagg ones but on my S4 there isn't front facing speakers.
Click to expand...
Click to collapse
Thats what I am worried about the most. The speakers are rather large and I've had bad experiences with wet install screen protectors. They killed my LG G Pad 8.3 (even when I barely put any solution on it, some managed to get into a small gap). Anyway I guess I'll see what else is available.
i just need any of the three screen protectors i ordered to show up. This POS one they put on the phone out of the box is killing me. I swear, would it kill moto (or any other manufacturer) to at least put a half way decent one on the device out of the box?
mb3030 said:
i just need any of the three screen protectors i ordered to show up. This POS one they put on the phone out of the box is killing me. I swear, would it kill moto (or any other manufacturer) to at least put a half way decent one on the device out of the box?
Click to expand...
Click to collapse
I'm pretty sure it's not an actual screen protector, just something to cover it until it gets to your door.
Zenzr said:
I'm pretty sure it's not an actual screen protector, just something to cover it until it gets to your door.
Click to expand...
Click to collapse
whatever- you know what i mean. This would add like a penny cost to a big manu
Pilz said:
Thats what I am worried about the most. The speakers are rather large and I've had bad experiences with wet install screen protectors. They killed my LG G Pad 8.3 (even when I barely put any solution on it, some managed to get into a small gap). Anyway I guess I'll see what else is available.
Click to expand...
Click to collapse
Well, I guess I won't be installing the wet ones I just got when I get my device.
mb3030 said:
i just need any of the three screen protectors i ordered to show up. This POS one they put on the phone out of the box is killing me. I swear, would it kill moto (or any other manufacturer) to at least put a half way decent one on the device out of the box?
Click to expand...
Click to collapse
heh that pos oem one the phone comes with lasted me a good month on the nexus 5. worked great!
anyway, my invisible defenders are out for delivery today. of course my phone isnt being delivered until tomorrow...
I ordered Spigen's for the N6. I Love it! can't even tell that i had one on my N5. As smooth as the screen.
---------- Post added at 10:17 AM ---------- Previous post was at 10:16 AM ----------
Pilz said:
I'm updating the OP it appears like there will be no good screen protectors that are edge to edge with the exception of wet install ones which are a nightmare. I wouldn't risk a wet install with FF speakers but that's just me. I may just get a dbrand front skin to cover the gaps.
Click to expand...
Click to collapse
I prefer wet install. I get the best install. Plus isn't this phone "splash" proof? (or was that a miscommunication?)
Has anyone found any screen protectors, film, PET, glass, etc. that cover the entire screen correctly? I've already ordered a film one that was all misaligned and didn't cover it well.
I hear that Zagg is coming out with one that's pretty awesome. It supposedly wrap around entirely, front to back.
I must be lucky because I never use a screen protector and have never experienced a broken screen, just use a Otterbox commuter.
I'm also looking for one of the self-healing screen protectors that fits... the ones on Amazon have reviews that say it's cut wrong
Spigen. #closethread
superleeds27 said:
Spigen. #closethread
Click to expand...
Click to collapse
Have you tested them?
I have a few of their screen protectors on order and should arrive in a few days.
Anybody else having issues with SPIGEN?
Don't seem to be sticking at the edges of the protector
I picked up an amFilm glass screen protector -- it's supposed to be full screen coverage.
I think I'll wait on ordering a glass screen protector until someone actually gets one installed and thinks it looks right. I'm wanting an edge to edge one. Even the Amfilm does not mention it's curved or not. Edge to Edge and curved to go to the edges are two different things.
I am going to buy the glass one here. http://www.ebay.com.au/itm/Galaxy-S...hash=item1a0f20ea52:m:mvH5yB-EhsNPPk95uO127rg
I live in Australia and don't want to wait a month for a screen protector
Leeum said:
I am going to buy the glass one here. http://www.ebay.com.au/itm/Galaxy-S...hash=item1a0f20ea52:m:mvH5yB-EhsNPPk95uO127rg
I live in Australia and don't want to wait a month for a screen protector
Click to expand...
Click to collapse
It says "Not Tempered Glass" if you read closely.
Just put on my skinomi matte. Perfect edge to edge fit. Not digging the rainbow effect though.
vesu said:
It says "Not Tempered Glass" if you read closely.
Click to expand...
Click to collapse
OMG thanks for that, Didn't see that. Might just go but this one http://www.ebay.com.au/itm/17211459...49&var=470953615215&ssPageName=STRK:MEBIDX:IT
And then order a full coverage tempered glass later
I've found the IQ Shield wet apply to be a decent alternative to tempered glass. Not quite as smooth and clear, but excellent fit and protection.
mrnamster said:
Just put on my skinomi matte. Perfect edge to edge fit. Not digging the rainbow effect though.
Click to expand...
Click to collapse
Second the Skinomi Matte, fits nicely. The Edge display looks a bit different under it, like the skin itself is lighting up not like it's a layer on top of the display. Previously used a tempered glass on my GS5 so this is a big difference. Touch feel of the skin is good. Had to remember how to put on a protector cleanly though, took a couple tries to get it done (but I had budgeted one 'practice' protector to burn).
Haven't noticed a rainbow effect though.
Spigen ones cover the whole screen (not full coverage) and from S6 experiance they are actually slightly wider than the active parts of the screen, unliek most ones I have seen that are exactly the same width as the screen.
Can someone confirm that the front dimesions of S6/S7 are the same? Have some spigen ones left and guessing they will fit exactly the same?
superleeds27 said:
Anybody else having issues with SPIGEN?
Don't seem to be sticking at the edges of the protector
Click to expand...
Click to collapse
Read both positive and negative ones on the S7 version. Some say perfect fit and some say its peels. Might be some quality control issues on first batches I guess as they were selling way before phone release.
Same here with spigen, they don't stick at sides.
Artius89 said:
Same here with spigen, they don't stick at sides.
Click to expand...
Click to collapse
Thats a bit of bad news. I would have expected better from Spigen.
Indeed, i always buy spigen screen/glass protectors but this time they're not very different from others.
Tbh i tried other screen protectors and spigen ones are the best, they don't stick for less than 1mm but it's away from perfect anyway.
Hi everyone, I’m wondering if anyone knows for sure whether or not the Pixel is going to have curved edges like the Galaxy S7?
srltzz342 said:
Hi everyone, I’m wondering if anyone knows for sure whether or not the Pixel is going to have curved edges like the Galaxy S7?
Click to expand...
Click to collapse
If you're talking about the screen, the edges of the screen are curved.
sn0warmy said:
If you're talking about the screen, the edges of the screen are curved.
Click to expand...
Click to collapse
Are you sure? It looks pretty flat from really looking at it...
It definitely has a curved edge. However, none of us know yet, whether the curve starts close enough to the edge to allow tempered glass screen protectors to fit without issues, or not. We will know shortly.
its suppose to be curved similar to how the iphone and note 4 are i believe.
Looks like it's going to have curved edges. Look at the images on this screen protector page. Looks like they are making it so that there's no halo effect.
https://www.amazon.com/Google-Scree...&keywords=Google+Pixel+Glass+Screen+Protector
tayluft said:
Looks like it's going to have curved edges. Look at the images on this screen protector page. Looks like they are making it so that there's no halo effect.
https://www.amazon.com/Google-Scree...&keywords=Google+Pixel+Glass+Screen+Protector
Click to expand...
Click to collapse
yeah, a number of the TG descriptions say the same thing. I'm fine with that, hate the halo.
This is one of those things I dislike about a lot of new phones. The slight curve at the edge looks nice, but makes screen protectors more difficult to deal with.
I'd much prefer a perfectly flat screen so that I can get a nice glass screen protector that covers the entire face of the phone. This is why I keep falling back to the Spigen plastic film screen protectors on my Nexus 6, they cover as far out on the edges as possible. I just replace them as they get scratched.
I've got a Orzly pro fit protector on the way and it says the edges are curved on it to fit the screen perfectly
rosswaa said:
I've got a Orzly pro fit protector on the way and it says the edges are curved on it to fit the screen perfectly
Click to expand...
Click to collapse
...we meet again.
Does it say when the protector is estimated to arrive? I just ordered the Orzly protector this morning and I'm really hoping it will magically get here before the phone does, even though shipping estimate for the protector is Nov 14 - 28.
sn0warmy said:
...we meet again.
Does it say when the protector is estimated to arrive? I just ordered the Orzly protector this morning and I'm really hoping it will magically get here before the phone does, even though shipping estimate for the protector is Nov 14 - 28.
Click to expand...
Click to collapse
If I'm right its at home now. My sister messaged me saying there's a package for me
Its either that or drone parts
atlp99 said:
This is one of those things I dislike about a lot of new phones. The slight curve at the edge looks nice, but makes screen protectors more difficult to deal with.
I'd much prefer a perfectly flat screen so that I can get a nice glass screen protector that covers the entire face of the phone. This is why I keep falling back to the Spigen plastic film screen protectors on my Nexus 6, they cover as far out on the edges as possible. I just replace them as they get scratched.
Click to expand...
Click to collapse
The purpose isn't even to look nice with a screen protector (which are useless anyway -- won't stop you from cracking the screen, since it will crack right through a screen protector). The purpose of curved edges is to EXPOSE the screen to drop damage, since the screen now sticks out beyond the frame instead of being tucked slightly into the frame.
This is what they do in order to maintain sales volumes when they realize that phone technology is so good now that you are likely to keep the same phone for several years. Make them break and you have to replace!
I can confirm that the pixel has curved edges and it is slightly less curved compared to the oneplus 3
lordred12345 said:
I can confirm that the pixel has curved edges and it is slightly less curved compared to the oneplus 3
Click to expand...
Click to collapse
Good deal. This means the Orzly TG protector with black borders should be a perfect option. I have the Skinomi wet apply protector going on the phone when it arrives tomorrow and it will hold me over until the Orzly protector arrives in November.
sn0warmy said:
Good deal. This means the Orzly TG protector with black borders should be a perfect option. I have the Skinomi wet apply protector going on the phone when it arrives tomorrow and it will hold me over until the Orzly protector arrives in November.
Click to expand...
Click to collapse
Exactly! That's what I will be using
Hi Guys,
Since there is no good tempered glass or screen protector available for the S7(not edge), Spigen has one but that's way too expensive and I wasn't able to find an authentic one in the market. Has anyone tried protectors and skins by GadgetShieldz? Here's the link-
http://www.gadgetshieldz.com/samsung-galaxy-s7-screen-protectors-covers-cases.html
The plus is that if the product is as good as they are describing then it covers the sides too. The con is that there is no actual proof or hands on video regarding the same+it is still expensive atleast for me but there's no other alternative.
Thanks
I just ordered the matte and the ultra clear screen protectors. I didn't buy the body because I have a Rhinoshield bumper and back protector. I'll post a review once they arrive.
Good product the body shield is
Have been using the Gadgetshielz full body protector for 6 months now. It is quite good and the cuts are precise. Quite a lot of work, applying them is. Be patient after applying, in a week or so, the bubbles and wobbles will sort themselves out. Was hard to believe when I completed installation and saw what a mess it was.
That doesn't look like tempered glass. I will NEVER go back to the flimsy protectors. Too many issues with bubbles, etc. But, I have yet to find a tempered glass that full covers the edges. It's more of an issue when things are right at the edges (such as text) that makes it difficult to read, but I'll take that as it's rare knowing that I have a tempered glass protector on that does a better job of absorbing the shock of a drop.
Using their screen protector, with my rhinoshield bumper case and no bubble. Wanted glass first but all those that I bought, the case lifted them or they had the big halo, lifting all around cause the curve screen.
http://s30.postimg.org/6k9nxdkm9/1.jpg
http://s30.postimg.org/u2bgpk80x/4.jpg
They are working way far better than the TGP.
billubakra said:
Hi Guys,
Since there is no good tempered glass or screen protector available for the S7(not edge), Spigen has one but that's way too expensive and I wasn't able to find an authentic one in the market. Has anyone tried protectors and skins by GadgetShieldz? Here's the link-
http://www.gadgetshieldz.com/samsung-galaxy-s7-screen-protectors-covers-cases.html
The plus is that if the product is as good as they are describing then it covers the sides too. The con is that there is no actual proof or hands on video regarding the same+it is still expensive atleast for me but there's no other alternative.
Thanks
Click to expand...
Click to collapse
Thanks mate. I bought two and will report when it arrives
So, here's why review-
Finally ordered them. It was my first time that I was installing any sort of protector and I was super nervous. The protector kept coming off. I had to wet it with the solutions many times. I drove out the bubbles as many as I could but the end result was way too foggy and messy. But after 48 hours everything was gone, except few dust and fingerprints particles which are my fault BTW there's a huge particle of dust on the back button. Can I lift it up just a tad to remove it? I still have the solution, I am planning to wet it to reapply. Will it work?
Also can anyone suggest a good cover for S7? My current one is a chinese one, but I think it will remove the side protectors if I take the phone out few times because with the side protectors the sides bulge out a bit. @r3xx3r @ere1nion
Any way to get the same cover in India?
iBolski said:
That doesn't look like tempered glass. I will NEVER go back to the flimsy protectors. Too many issues with bubbles, etc. But, I have yet to find a tempered glass that full covers the edges. It's more of an issue when things are right at the edges (such as text) that makes it difficult to read, but I'll take that as it's rare knowing that I have a tempered glass protector on that does a better job of absorbing the shock of a drop.
Click to expand...
Click to collapse
I searched for a month, ordered like 10 different tempered glasses from various websites but they all sucked. GS's protector is not a glass but it is the best alternative to a glass.
An out of context question, what are these four stripes/white lines located on the top and bottom side of the phone for? Just along the charger and speaker in the photos below-
http://www.theinquirer.net/w-images...xys7edgereviewusbport-540x334.jpeg?1458143499
https://fscl01.fonpit.de/userfiles/.../AndroidPIT-Samsung-galaxy-s7-edge-2-w782.jpg
billubakra said:
An out of context question, what are these four stripes/white lines located on the top and bottom side of the phone for? Just along the charger and speaker in the photos below-
http://www.theinquirer.net/w-images...xys7edgereviewusbport-540x334.jpeg?1458143499
https://fscl01.fonpit.de/userfiles/.../AndroidPIT-Samsung-galaxy-s7-edge-2-w782.jpg
Click to expand...
Click to collapse
Those plastic lines are antenna separators. The frame of the phone is used for different antennas, so they must be separated.
MrDusan said:
Those plastic lines are antenna separators. The frame of the phone is used for different antennas, so they must be separated.
Click to expand...
Click to collapse
Thanks Brother. When I saw them for the first time I thought they are there for the light notification purposes.
billubakra said:
Thanks Brother. When I saw them for the first time I thought they are there for the light notification purposes.
Click to expand...
Click to collapse
You're welcome! That would actually be cool
Are U still using those GadgetShieldz? I want to buy them.
MrDusan said:
You're welcome! That would actually be cool
Are U still using those GadgetShieldz? I want to buy them.
Click to expand...
Click to collapse
Yes, since there's no curved/rounded tempered glass available so still using them. Go for them Brother.
Look into rhinosheild. Absolutely unbeliveable. I'll be ordering mine this week.
With that screen protector, ip68, and my otterbox defender; I will never worry about this phone breaking on me.
James.Markham0757 said:
Look into rhinosheild. Absolutely unbeliveable. I'll be ordering mine this week.
With that screen protector, ip68, and my otterbox defender; I will never worry about this phone breaking on me.
Click to expand...
Click to collapse
Not full coverage as per the reviews-
https://rhinoshield.io/products/galaxy-s7-screen-protector?variant=12329024001
An update, I used my phone with the Samsung Gear VR yesterday and when I removed it the protector from the upper side of the phone, where the front camera is got removed I tried to paste the same but it is full of bubbles now . Is anyone else using GS's protector with VR?
billubakra said:
Not full coverage as per the reviews-
https://rhinoshield.io/products/galaxy-s7-screen-protector?variant=12329024001
Click to expand...
Click to collapse
Correct it is not. I use the Otterbox Commuter and Otterbox Defender so this is not an issue for me particularly. I had a partial screen protector on already so no shift in change for me there either. I just received mine in the mail today. The back application was by far harder than the front. I didn't get it perfect. It's the material used on the back. I will not be testing this screen protector but I feel confident with it on. Hopefully it will never need to prove itself.
So, my protector is screwed thanks to Gear VR, it kept on removing the upper part of the protector every time I put the phone in the Gear VR or took it out. Has anyone tried the so called buff guard(a type of tempered glass) which covers the whole screen even the edges? Is there any alternative for the GadgetShieldz protector?
My wife just upgraded to an S7 (tried the Moto Z and it was too big, bulky and heavy for her). She wanted a tempered glass screen protector, but not like the one I have (which doesn't cover the entire screen due to the curved edges of the S7).
After much research, I found the amFilm glass protector was one that was listed in many top-10 lists as being excellent. This covers the entire glass but gives room on the edges for cases. My wife has a Speck Candyshell case for her phone and the screen protector works fine with it. My only issue with it is that on the top and bottom (which is fully protected), it's colored. So you have to choose the correct color based on your phone (black or gold). I don't understand why it has to be colored. Why not make it all clear so you can see the actual color of the phone? But it DOES cover the entire screen unlike the earlier brands that came out. And it was very easy to apply and there are no bubbles at all. Touch response is excellent from what I could tell. I tested it and couldn't find any "soft" or "blind" spots that didn't react and I just lightly touched, so it was pretty good. I'll wait and see how it goes with my wife after she's had it for awhile. It also comes with a lifetime warranty for the purchased product. That means, and they state this in the documentation that comes with the protector, that the warranty does NOT apply to a warranty replacement item. So that means, if you've swapped out your initial purchase with a warranty item, you'll have to purchase a brand new screen protector to get a lifetime warranty again. That is pretty standard across most things like this, so I have no complaints.
Here is the gold colored one that I ordered and installed since she has a gold S7:
https://www.amazon.com/gp/product/B01CUKZ296/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
iBolski said:
My wife just upgraded to an S7 (tried the Moto Z and it was too big, bulky and heavy for her). She wanted a tempered glass screen protector, but not like the one I have (which doesn't cover the entire screen due to the curved edges of the S7).
After much research, I found the amFilm glass protector was one that was listed in many top-10 lists as being excellent. This covers the entire glass but gives room on the edges for cases. My wife has a Speck Candyshell case for her phone and the screen protector works fine with it. My only issue with it is that on the top and bottom (which is fully protected), it's colored. So you can to choose the correct color based on your phone (black or gold). I don't understand why it has to be colored. Why not make it all clear so you can see the actual color of the phone? But it DOES cover the entire screen unlike the earlier brands that came out. And it was very easy to apply and there are no bubbles at all. Touch response is excellent from what I could tell. I tested it and couldn't find any "soft" or "blind" spots that didn't react and I just lightly touched, so it was pretty good. I'll wait and see how it goes with my wife after she's had it for awhile. It also comes with a lifetime warranty for the purchased product. That means, and they state this in the documentation that comes with the protector, that the warranty does NOT apply to a warranty replacement item. So that means, if you've swapped out your initial purchase with a warranty item, you'll have to purchase a brand new screen protector to get a lifetime warranty again. That is pretty standard across most things like this, so I have no complaints.
Here is the gold colored one that I ordered and installed since she has a gold S7:
https://www.amazon.com/gp/product/B01CUKZ296/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Thanks for such a detailed review. There are many protector glasses of that sort available in India, all of them are manufactured in china, but not the brand which you have mentioned. The reviews of the chinese one's is pathetic. So, I didn't go for them. Can you please check and confirm whether the phone fits fine in Gear Vr with the protector that you have installed or not?
This one, though its for the Edge model, looks tempting but I will wait for an early bird's review before ordering the one for the non-Edge version which should be available by tomorrow-
http://www.amazon.in/CEDO-Samsung-G...ems&ie=UTF8&qid=1489471980&sr=1-4&keywords=s7
I've been reading all the threads in the forum after I brought my OP 5 yesterday (supposed to arrive to me in the next 2 weeks) and I cant find any solid recommendation.
There aren't any brands making screen protectors to our devices and even less reviews.
-I saw people saying to stay away from the original screen protector made by Oneplus due to the few millimeter lost cause by it.
-I looked on the Orzly screen protector and it looked quiet well but after searching the web I saw multitude negative reviews due lack of adhesiv, dot metrix and rainbows showing up on the screen. but some other who claims the protector is completely fine
In conclusion: In the Glass screen protectors section, there is no good product that will be fine with guarantee ?
If so, there is any other kind of screen protector (not glass one's) such as Skinomi or IQ Shield that are recommended?
I have to order any kind of screen protector as soon as possible before my device will arrive.
thanks for your professional support !
Every single option, glass or TPU, sucks. The best option is the non-glass protector that ships applied to the phone. Baby that one as long as you can.
Goronok said:
Every single option, glass or TPU, sucks. The best option is the non-glass protector that ships applied to the phone. Baby that one as long as you can.
Click to expand...
Click to collapse
I would agree with you, when it wouldn't collect more dust than a vacuum cleaner.
GTI86 said:
I would agree with you, when it wouldn't collect more dust than a vacuum cleaner.
Click to expand...
Click to collapse
Still the best, even covered in 2" of lint lol
As much as the screen protectors suck, the Orzly is stil the best of the bunch. I have it installed with no rainbow effect in the middle. Again, I think this is a case of people who have the issues are the ones you see. It depends on how you install it I guess. I know a few others who have also installed it without the rainbow, but I know people who have installed it and have had the rainbow. At least it is a fully screen protector, that doesnt cut off a millimeter of the screen basically, and at least they aren't a company that blames the user for obvious issues with their TGSP *cough* Oneplus *cough*
Take it from someone who has been through 5+ different screen protectors... About the only one that was semi worth a damn was Orzly. You run into ones that don't fill the entire screen and leave the edges exposed, don't stick, cover the front camera or ones that just flat out don't end up sticking. I wish I didn't end up taking off the one that the OP5 came shipped with but oh well lesson learned. As I said as of right now the only semi decent one is Orzly but even that one I had issues with the glue towards the edges peeling so the screen wouldn't respond because the protector was coming off the screen a little. Still though - Orzly or Manufacturer screen that was originally on the one are your best options at this point.
I really like the IQ branded film protector. I've had no problems with it and I only really notice it when I swipe along the edges and feel the film.
xeonyxorich said:
I really like the IQ branded film protector. I've had no problems with it and I only really notice it when I swipe along the edges and feel the film.
Click to expand...
Click to collapse
do you use the clear protector or the matte one?
how does it feel ? smooth enough? fingerprints residue ?
you dont have problems using it with cases?
liadatz said:
do you use the clear protector or the matte one?
how does it feel ? smooth enough? fingerprints residue ?
you dont have problems using it with cases?
Click to expand...
Click to collapse
I'm using the clear one. It's definitely not as smooth as glass but it's smooth enough. It's more smooth than a glass screen without a oleophobic coating. Fingerprint residue is minimal. The only case I have is the sandstone one from OnePlus and I have no problems with it.
xeonyxorich said:
I'm use the clear one. It's definitely not as smooth as glass but it's smooth enough. It's more smooth than a glass screen without a oleophobic coating. Fingerprint residue is minimal. The only case I have is the sandstone one from OnePlus and I have no problems with it.
Click to expand...
Click to collapse
Using the clear IQ protector here too. So far it's the best I've found. I've used the official TGSP, Orzly TGSP, and a couple other cheaper TGSPs. The wet application film screen protectors are the way to go for this phone it seems. Helps a lot with finger prints and I haven't had any issues with it not being slick enough.
think ill just go nude and use a thick case lol. haven't had any scratches on my s8+ which also has gorilla glass 5.
man do i hate how all phones have curved glass of some sort.
Damn those curves.. Let's hope that maybe in a few weeks we will finally get a proper screen protector.
cdig said:
think ill just go nude and use a thick case lol. haven't had any scratches on my s8+ which also has gorilla glass 5.
man do i hate how all phones have curved glass of some sort.
Click to expand...
Click to collapse
I went and removed the factory installed protector, it was a bad idea. Now I have small hairline scratches on the bottom right corner. I've now ordered a tempered glass in Amazon to hide the scratches.
The one that came with the phone is fantastic imo. I haven't enjoyed tgsp since my nexus 6p because of the 2.5D curved glass craze, no tgsp fits any phone good anymore. Axon, Samsung (ROFL, you thought OUR screen was bad?) , I haven't looked at the screen protectors for the G6, but the screen doesn't appear to be 2.5d so that's a step in the right direction..
When my stock screen protector gets unusable, I'll buy the 30$ crash guard from rhinosheidl ?????? Just to see if the hype is real...
Unless someone already has photos of it....
MrWilsonxD said:
The one that came with the phone is fantastic imo. I haven't enjoyed tgsp since my nexus 6p because of the 2.5D curved glass craze, no tgsp fits any phone good anymore. Axon, Samsung (ROFL, you thought OUR screen was bad?) , I haven't looked at the screen protectors for the G6, but the screen doesn't appear to be 2.5d so that's a step in the right direction..
When my stock screen protector gets unusable, I'll buy the 30$ crash guard from rhinosheidl Just to see if the hype is real...
Unless someone already has photos of it....
Click to expand...
Click to collapse
Any idea when the crashguard is shipping. I don't wanna drop that type of money without looking at reviews.
A Guy Called Revive said:
Any idea when the crashguard is shipping. I don't wanna drop that type of money without looking at reviews.
Click to expand...
Click to collapse
No idea whatsoever, my stock screen protector from oneplus is still in fantastic shape, so I don't imagine ordering four a couple more months at least.
The ones for the oneplus 3 are 13 dollars on amazon, and ship with prime in the US.. So I imagine in a few weeks the price will become more better.
I've recently seen this on the taobao site. GOR branded TSP. I've used their flat ones on other phones and am quite satisfied with the performance. They have 2 versions, one with the black border, one with a edge sealant sort of thing. I'm planning to get the sealant version next month since my option to add items for cheap shipping is exhausted for July....
If anyone's in China or has bought one, some feedback would be appreciated.
https://m.intl.taobao.com/detail/detail.html?id=554613982294
Sent from my ONEPLUS A5000 using Tapatalk
A Guy Called Revive said:
Any idea when the crashguard is shipping. I don't wanna drop that type of money without looking at reviews.
Click to expand...
Click to collapse
https://rhinoshield.io/products/oneplus-5-bumper-case?variant=35872333313
RhinoShield should be out by second half of August according to their site.
failure_2_win said:
https://rhinoshield.io/products/oneplus-5-bumper-case?variant=35872333313
RhinoShield should be out by second half of August according to their site.
Click to expand...
Click to collapse
that's only their bumper.
they are already sending out screen protectors.
i just received mine.
will send it back right away.
waaaay to small, doesn't even cover the display correctly.
Dinjesk said:
that's only their bumper.
they are already sending out screen protectors.
i just received mine.
will send it back right away.
waaaay to small, doesn't even cover the display correctly.
Click to expand...
Click to collapse
Its says in the description, "Not edge to edge protection. (NOT FULL COVERAGE)" so there is no false advertising