Related
Hello!
I need some help and I know this is the place to find it!
I have searched for several days all over the internet trying to read and gather information, and I am coming up short.
I know Bruno Martins has posted some information on his blog on how to "readback" (backup) your current rom for your phone, but there is no information on how to flash the entire ROM package back to your phone (at least with regard to the errors you may receive).
Basically, I am looking for some help on how to backup one of my phones entire rom package and put it on my other phone that I messed up via the Smart Phone Flash Tool (the exact same model: Star Touch Diamond 2 B2000 MT6573).
The new phone works perfect, I have never touched it, my old phone which is the same model I deleted and formatted the system so I need to put the stock rom on.
I was able to do a "backup" of my new phone, but when i try to flash the preloader and uboot, etc, the sp flash tool says error loading file, or region too large with overlap.
Any help would be greatly appreciated!
By the way, my phone is not bricked, but I cannot access recovery! I was able to find and install another fully assembled rom to my phone and the phone does power on with lights, but it doesnt have the display driver I need so I cannot see anything.
The reason I flashed another rom was because the phone was essentially bricked and wouldnt do anything, and that was the only rom I could find on the internet that was a full package (preloader, uboot, system, etc) but isnt compatible with phone.
Anyhow, if I understand correctly I need to use hexadecimal calculator to find length of partitions of original phones rom, readback the files, somehow edit the preloader file? then flash them back to the old phone?
Please help!
I would love to make a tutorial of this method with pictures and possible errors for everyone if we could get this solved!
Please point me in the right direction!
And I wanted to thank BRUNO in advance for his hard work and help!!
have you tried the neutrino rom from notorious? its reallllly small around 50mb. you may be able to install that since it so small, then work your way back down? not too sure and i can say im no grandmaster but it might work!
***derp. neutrino... thats for atrix only. but hey same concept. maybe a small barebones rom will get you running enough to get things done properly.
Hello stokemonkey!
No, I have not tried the neutrino rom. My main goal is to take my working phone and copy the firmware to my other phone which is the same model. I attempted to flash a rom and then it didnt work out so well (phone still lights up, drivers are not compatible).
I all else fails I can attempt the neurtino rom (as long as you dont have to install from sd card zip file because I cannot!)
the neutrino is an Atrix 4G rom only, so you cant use it and it also needs to be installed via internal so its a no go either way. isnt your phone the china "htc" model? i dont have much user time on an htc so im not too sure what you can do?
again id try to find a barebones that you can flash the way you did with the rom that gave you errors. ill try to do some searching too and see what i can find. let me know if you get anything workin! and if there is someone else out there that can enlighten the both of us help would be appreciated!
and isnt yours like an evo 4g? maybe one of those roms will work?
Thanks for your response and suggestions. I will try to dish up a small tutorial with how far I can get in the backup/flashing process. I can check for an evo 4g rom and see what the specs are. The current rom I used i believe works, but doesnt have the video driver so the screen has no image. I believe each partition of ram has a set size so you can only flash a rom for the mt6573 chipset which will fit in the available space for each partition and also happens to contain the video, audio, bluetooth, etc drivers.
I have used SP Flash Tool and was able to backup all of the partitions of my working phone but the SP Flash Tool gives all sorts of errors when I try to load the files and flash them to my non-working phone.
The funny thing is that I downloaded files for a different phones rom and was able to flash those to the non-working phone, as mentioned in my previous post, which allows the phone to power on, but the phone doesnt work besides lighting up.
I know it is possible to make a backup of my good phone and flash that rom onto my non-working phone, I just dont know what I am doing wrong.
So far, this is what I have done . . .
1. Installed SDK tools for android
2. Obtained my scatter txt file by using command prompt
3. Used MTKRomStudio to open that file which tells me the addresses of all the partitions and their file sizes
4. Used SP Flash Tool V.2.11.29.00 to "readback" (backup) each individual rom file (preloader, uboot, bootimg, android, dsp, etc)
5. Confirmed the file sizes of each of the above files to what MTKRomStudio said the file size should be
6. Attempted to load these files into SP Flash Tool and get errors such as "partition too large, failed to load", or "partitions overlap".
7. I was able to open some of the partitions such as android, and usrdata but when attempting to flash I receive errors such as "dram error".
8. I was able to download an entire backup of all "readback" files for a different model phone, and each one of those files loaded fine and downloaded to my non-working phone.
9. Just to mention, my non-working phone was completely dead (no power up, no lights) before I flashed the random phone rom I found online, and now at least it powers up (lights up).
Anyone have any information? I have created a small visual representation of what I have been looking at and messing around with. Let me know!
Mt6573 phone flash help
Hi all, I need help. I used sp flash tool and flashed the original files to my phone. I then restarted the phone and it would not go past the blue android screen. I let se overnight and still no success. After that i flash the boot and still no progress. Finally i flashed the uboot and now it only lights up but no picture at all. I have used sp flash to try to flash the entire file system back to the mt6573 but it will not flash the recovery, android, or sec_ro files. Can anyone help?
CrimsonX said:
Hi all, I need help. I used sp flash tool and flashed the original files to my phone. I then restarted the phone and it would not go past the blue android screen. I let se overnight and still no success. After that i flash the boot and still no progress. Finally i flashed the uboot and now it only lights up but no picture at all. I have used sp flash to try to flash the entire file system back to the mt6573 but it will not flash the recovery, android, or sec_ro files. Can anyone help?
Click to expand...
Click to collapse
Same problem here except I can't flash dsp and preloader
UPDATE : flash worked finaly.my phone is fixed
Sent from my GT-P5110 using xda app-developers app
Whistler011 said:
Same problem here except I can't flash dsp and preloader
UPDATE : flash worked finaly.my phone is fixed
Sent from my GT-P5110 using xda app-developers app
Click to expand...
Click to collapse
Please share how you did it, i'm in the same position with a MT6573 phone that are stuck on boot, and wont accept the preloaderfile
nsxtas said:
Please share how you did it, i'm in the same position with a MT6573 phone that are stuck on boot, and wont accept the preloaderfile
Click to expand...
Click to collapse
Same here.
Can somebody please post all the files .
I have an Alcatel one touch 918 not d/m/n
It`s the second phone that i have bricked.
Sharing it`s caring.
LeStonga said:
4. Used SP Flash Tool V.2.11.29.00 to "readback" (backup) each individual rom file (preloader, uboot, bootimg, android, dsp, etc)
Click to expand...
Click to collapse
I'm using MTK6573 phone but could i know how do you start the "readback" using SP Flash. I'm not able to start it while holding VOL-UP button and connect the USB data cable into your phone. Are there any other methods to start it. Thanks for your help.
CM
Why don't you make a try with CyanogenMod?
LeStonga said:
Thanks for your response and suggestions. I will try to dish up a small tutorial with how far I can get in the backup/flashing process. I can check for an evo 4g rom and see what the specs are. The current rom I used i believe works, but doesnt have the video driver so the screen has no image. I believe each partition of ram has a set size so you can only flash a rom for the mt6573 chipset which will fit in the available space for each partition and also happens to contain the video, audio, bluetooth, etc drivers.
I have used SP Flash Tool and was able to backup all of the partitions of my working phone but the SP Flash Tool gives all sorts of errors when I try to load the files and flash them to my non-working phone.
The funny thing is that I downloaded files for a different phones rom and was able to flash those to the non-working phone, as mentioned in my previous post, which allows the phone to power on, but the phone doesnt work besides lighting up.
I know it is possible to make a backup of my good phone and flash that rom onto my non-working phone, I just dont know what I am doing wrong.
So far, this is what I have done . . .
1. Installed SDK tools for android
2. Obtained my scatter txt file by using command prompt
3. Used MTKRomStudio to open that file which tells me the addresses of all the partitions and their file sizes
4. Used SP Flash Tool V.2.11.29.00 to "readback" (backup) each individual rom file (preloader, uboot, bootimg, android, dsp, etc)
5. Confirmed the file sizes of each of the above files to what MTKRomStudio said the file size should be
6. Attempted to load these files into SP Flash Tool and get errors such as "partition too large, failed to load", or "partitions overlap".
7. I was able to open some of the partitions such as android, and usrdata but when attempting to flash I receive errors such as "dram error".
8. I was able to download an entire backup of all "readback" files for a different model phone, and each one of those files loaded fine and downloaded to my non-working phone.
9. Just to mention, my non-working phone was completely dead (no power up, no lights) before I flashed the random phone rom I found online, and now at least it powers up (lights up).
Click to expand...
Click to collapse
I have a MT6575 phone and I have exactly your nr. 7 issue (BROM ERROR:S_DL_GET_DRAM_SETTING_FAIL(5054)). Were you able to get this working somehow? I am confident that the selected partitions are for this phone as I read them out myself. But flashing back won't work. Does anyone have any leads?
e-lime said:
I have a MT6575 phone and I have exactly your nr. 7 issue (BROM ERROR:S_DL_GET_DRAM_SETTING_FAIL(5054)). Were you able to get this working somehow? I am confident that the selected partitions are for this phone as I read them out myself. But flashing back won't work. Does anyone have any leads?
Click to expand...
Click to collapse
If you have the correct files use the newest version:
http://forum.xda-developers.com/showthread.php?t=1982587
It is easy to mess things up if you try random files.
MTK 6577 and SP Flash Tool
I too am also having problems with the flash tool. I am trying to help a friend bring his chinese note 2 clone back to life. He somehow got CWM onto the phone and the custom recovery seems to be functioning properly, but I cant find any sort of ROM file to flash in recovery.
Now I am going back and trying to restore the phone to factory using the flash tool. Installed the VCOM drivers, then went to load the scatter file we obtained from the factory (Bro Tech) it says the scatter file is incorrect format?
My question is: are there any roms we could try to flash on this phone from CWM or do we have to use the Flash Tool? I'm hoping since CWM seems to be working that I can simply flash an acceptable rom with that instead of trying to find a scatter file.
Maybe someone can suggest some ROMs to try flashing with CWM. The phone is: Goophone N2 7100 I believe. Thanks for reading, I really want to help him resurrect this interesting piece of copyright infringement (the phone looks amazingly like a Note 2 till you get close to it)
Evita Carbonized
GTab 2 7 AOKP'd
DollarStrawz said:
I too am also having problems with the flash tool. I am trying to help a friend bring his chinese note 2 clone back to life. He somehow got CWM onto the phone and the custom recovery seems to be functioning properly, but I cant find any sort of ROM file to flash in recovery.
Now I am going back and trying to restore the phone to factory using the flash tool. Installed the VCOM drivers, then went to load the scatter file we obtained from the factory (Bro Tech) it says the scatter file is incorrect format?
My question is: are there any roms we could try to flash on this phone from CWM or do we have to use the Flash Tool? I'm hoping since CWM seems to be working that I can simply flash an acceptable rom with that instead of trying to find a scatter file.
Maybe someone can suggest some ROMs to try flashing with CWM. The phone is: Goophone N2 7100 I believe. Thanks for reading, I really want to help him resurrect this interesting piece of copyright infringement (the phone looks amazingly like a Note 2 till you get close to it)
Evita Carbonized
GTab 2 7 AOKP'd
Click to expand...
Click to collapse
Create personalized file scatter for your device with MTK Droid. Here: http://forum.xda-developers.com/showthread.php?t=2160490
[email protected] said:
Same here.
Can somebody please post all the files .
I have an Alcatel one touch 918 not d/m/n
It`s the second phone that i have bricked.
Sharing it`s caring.
Click to expand...
Click to collapse
Have a alcatel 4033a Phone Got bricked and needs to be flash any help on that ..? plz i need help
Alecupid said:
Have a alcatel 4033a Phone Got bricked and needs to be flash any help on that ..? plz i need help
Click to expand...
Click to collapse
hi, i've made a mistake.
I've installed an odex version from a modified recovery(with dalvick cache). Can anyone help me?
I find myself with a big problem. I just got a new Huawei Ascend D1 (not quad) and I am having MAJOR issues. My programing friend decided that he was going to root it for me and add the play store to it. He didn't and now now it won't boot. Near as I can tell, he did something to the system file, based on how gapps seems to be installed. Anyway, I can boot to the splash screen and put it in download mode. I can get to the bootloader, but it fails to allow me to flash the factory ROM back....something about a signature failure. I really need help. I have some knowledge of ADB, but seem to be failing. Can anyone help me?
Any pro. expert help you
danaber11 said:
I find myself with a big problem. I just got a new Huawei Ascend D1 (not quad) and I am having MAJOR issues. My programing friend decided that he was going to root it for me and add the play store to it. He didn't and now now it won't boot. Near as I can tell, he did something to the system file, based on how gapps seems to be installed. Anyway, I can boot to the splash screen and put it in download mode. I can get to the bootloader, but it fails to allow me to flash the factory ROM back....something about a signature failure. I really need help. I have some knowledge of ADB, but seem to be failing. Can anyone help me?
Click to expand...
Click to collapse
My Suggestion is to take back to the Huawei service centre , might they help you !
Or any expert will help you here and get you out of trouble
danaber11 said:
I find myself with a big problem. I just got a new Huawei Ascend D1 (not quad) and I am having MAJOR issues. My programing friend decided that he was going to root it for me and add the play store to it. He didn't and now now it won't boot. Near as I can tell, he did something to the system file, based on how gapps seems to be installed. Anyway, I can boot to the splash screen and put it in download mode. I can get to the bootloader, but it fails to allow me to flash the factory ROM back....something about a signature failure. I really need help. I have some knowledge of ADB, but seem to be failing. Can anyone help me?
Click to expand...
Click to collapse
I need more detailed description of actions your friend perfomed, and version of your firmware. Also, if you do not afraid of russian language, you can check this thread (to download any attachments, you must be logged in, or it give you 404).
SionGrey said:
I need more detailed description of actions your friend perfomed, and version of your firmware. Also, if you do not afraid of russian language, you can check this thread (to download any attachments, you must be logged in, or it give you 404).
Click to expand...
Click to collapse
I was able to get some info on what Z did. After rooting the phone with Root Bin4ry v18, he copied the contents of the System folder in the gapps package, using es file explorer, into the system folder of the phone. He then restarted the phone and now it goes straight to bootloader and will not flash the ROM. Unfortunately, I could not tell you what firmware was on it other than the latest one. The one bright spot in all of this is that Z made a copy of original system folder. I think I just need to get that back into the system folder on the phone and I should be all set.
danaber11 said:
I was able to get some info on what Z did. After rooting the phone with Root Bin4ry v18, he copied the contents of the System folder in the gapps package, using es file explorer, into the system folder of the phone. He then restarted the phone and now it goes straight to bootloader and will not flash the ROM. Unfortunately, I could not tell you what firmware was on it other than the latest one. The one bright spot in all of this is that Z made a copy of original system folder. I think I just need to get that back into the system folder on the phone and I should be all set.
Click to expand...
Click to collapse
have you try data wipe in recovery ?
if no so check and try wiping :good:
That was the first thing I tried.
Hello Everyone,
I badly need help on my Huawei Honor U8860 phone. I have recently updated it from 2.3.6 to 4.03 over WIFI and the update went smoothly. So now here is what my phone have:
Kernel Version: 3.0.8-perf-00059-g3a757a2 [email protected] #1
Build Number: U8860IV100R001C00B923SP01
I have not rooted the phone at this time. It was working fine until 2 days ago when I started getting messages on the screen like:
"Unfortunately, 2D Home has stopped"
"Unfortunately, Google Play has stopped"
"Unfortunately, Contacts has stopped"
"Unfortunately, Settings has stopped"
"Unfortunately, Google Play Music has stopped"
"Unfortunately, Browser has stopped"
And so on, and so forth. It seems that all apps and processes have stopped when I try to use them so I literally can't use the phone. I went through several threads here just trying to restore my phone back to a
working state. I tried to do the following in order but without success:
1.) Factory data reset / erase everything - the phone boots to the recovery menu then it formats the /Data, /Cache and /HWUserData then it reboots. After reboot, the phone is back to where it was before the factory data reset with everything in it including downloaded apps.
2.) Manually uninstalled all downloaded apps. Removed screen lock (just to see if phone behavior changes). Then rebooted the phone but after reboot, all the apps are still installed and the screen lock is back as well.
3.) I tried to Force Update with the following official ROMs: B886, B919 and B923 but I always get the message "Update failed" during the update process.
4.) I downloaded the file "recovery-u8860-en.img" so I can replace the "recovery.img" file . Rebooted the phone w/ the pink screen and connected it to my PC but there is no USB mass storage device mounted.
5.) Finally, I tried to root the phone. I enabled USB debugging. I installed the ADB drivers then I downloaded the U8860 root tools and rootexplorer.apk. When I ran the "root-me.cmd", it tried to copy some files to the phone but it failed. The error was "read-only file system".
So it seems that the problem is because of the "read-only filesystem". I does not permit/allow any changes made to the phone. Can you help me restore my phone?
Please.. Can somebody help me on this?
Thanks, clint2rose
clint2rose said:
Please.. Can somebody help me on this?
Thanks, clint2rose
Click to expand...
Click to collapse
I still did not find any solution for my problem. I read from this thread that all ICS versions can be downgraded.
http://forum.xda-developers.com/showthread.php?t=1552038&page=232
Is there a way to downgrade from B923 to B919? I think this will solve the problem I'm facing.
clint2rose said:
I still did not find any solution for my problem. I read from this thread that all ICS versions can be downgraded.
http://forum.xda-developers.com/showthread.php?t=1552038&page=232
Is there a way to downgrade from B923 to B919? I think this will solve the problem I'm facing.
Click to expand...
Click to collapse
try to back-up some of the data form the partitions that are full on your phone and delete them, maybe afterwards the stock-rom-flashing procedure will work again.
kaefert said:
try to back-up some of the data form the partitions that are full on your phone and delete them, maybe afterwards the stock-rom-flashing procedure will work again.
Click to expand...
Click to collapse
thanks for the reply. it did not work. I even formatted the internal SD. Re-run the firmware update but it failed. when i boot the phone, all the contents of the internal SD remains intact. any other suggestion?
I can remember there was some talk of "downgrade patches" to flash before official ROMs if downgrades failed
http://forum.xda-developers.com/showpost.php?p=36819830&postcount=2312
http://forum.xda-developers.com/showpost.php?p=36117718&postcount=2228
http://forum.xda-developers.com/showpost.php?p=35376103&postcount=2104
http://forum.xda-developers.com/showpost.php?p=34105274&postcount=1865
http://forum.xda-developers.com/showthread.php?p=32996711&highlight=patch#post32996711
working download linka (just tested them) -->
https://docs.google.com/file/d/0B4MkDBK_iI-gWEoyaWpEekRXT00/edit
http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDE5Nzg=
kaefert said:
I can remember there was some talk of "downgrade patches" to flash before official ROMs if downgrades failed
http://forum.xda-developers.com/showpost.php?p=36819830&postcount=2312
http://forum.xda-developers.com/showpost.php?p=36117718&postcount=2228
http://forum.xda-developers.com/showpost.php?p=35376103&postcount=2104
http://forum.xda-developers.com/showpost.php?p=34105274&postcount=1865
http://forum.xda-developers.com/showthread.php?p=32996711&highlight=patch#post32996711
working download linka (just tested them) -->
https://docs.google.com/file/d/0B4MkDBK_iI-gWEoyaWpEekRXT00/edit
http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDE5Nzg=
Click to expand...
Click to collapse
I downloaded the files from both links. Can you tell me how to flash my current ROM? Because when I tried to use the file like a regular ROM (I created dload folder then put UPDATE.APP in the folder, then ran firmware update.. the update failed)..
clint2rose said:
I downloaded the files from both links. Can you tell me how to flash my current ROM? Because when I tried to use the file like a regular ROM (I created dload folder then put UPDATE.APP in the folder, then ran firmware update.. the update failed)..
Click to expand...
Click to collapse
what do you mean by flashing your current ROM? Just like any other stock ROM put the dload folder on the sd-card and start the update procedure either from the settings menu or via the boot-key-combination.
Yes the way you discribed is the correct one for flashing those patches, If those patches also don't work, I'm out of ideas, sorry.
kaefert said:
what do you mean by flashing your current ROM? Just like any other stock ROM put the dload folder on the sd-card and start the update procedure either from the settings menu or via the boot-key-combination.
Yes the way you discribed is the correct one for flashing those patches, If those patches also don't work, I'm out of ideas, sorry.
Click to expand...
Click to collapse
Thank you once more for your time. Most of the thread I read regarding these patches often used the phrase" you have to flash the current version of your ROM using the patch"...
And yes I created dload folder, place the UPDATE.APP and put it on the sdcard. I turned off the phone and removed the battery. Then I pressed vol+ vol- and power on/off button. The firmware update went to about 70% installing before displaying update failed.
I guess I will have to bring my phone to a repair center. My only problem is that there is no Huawei service center at my place (I reside here in Saudi Arabia). I got the phone as a free device on a broadband package and the warranty is already expired. I'm a little worried to take the phone to the small mobile repair shops as they might screw up the phone even more. Huawei is not a popular device here unlike iPhone, HTC and Samsung Galaxy.
As I understood that your device is rooted, you should get some custom ROM and try to install it.
okty2k said:
As I understood that your device is rooted, you should get some custom ROM and try to install it.
Click to expand...
Click to collapse
No, my device is not rooted. I tried to root it but I get the message "failed to copy file: Read-only file system".
clint2rose said:
No, my device is not rooted. I tried to root it but I get the message "failed to copy file: Read-only file system".
Click to expand...
Click to collapse
you don't need to be rooted, you only need to have a custom recovery deployed (which you can either do with root permissions, or by using the pink screen method, but some newer stock roms (you said your on 932 or something? last non-locked working is b919) this has been locked and the device will not boot if the kernel or the recovery image has been manipulated.
I think you will have to find some (huawei-certified!) repair-center, small do-it-all phone-shops probably won't be able to take care of this problem for you.. I'm sorry but I don't see any other solution
kaefert said:
you don't need to be rooted, you only need to have a custom recovery deployed (which you can either do with root permissions, or by using the pink screen method, but some newer stock roms (you said your on 932 or something? last non-locked working is b919) this has been locked and the device will not boot if the kernel or the recovery image has been manipulated.
I think you will have to find some (huawei-certified!) repair-center, small do-it-all phone-shops probably won't be able to take care of this problem for you.. I'm sorry but I don't see any other solution
Click to expand...
Click to collapse
Ok. I will try to find a repair-center experienced in Huawei devices. I have one last question if you don't mind. Is it possible to erase everything on the phone? As in completely erase or reformat after which there will not be an operating system on the phone. I read in some threads that this is possible w/ custom recovery but I want to know if it is also possible for phones without the custom recovery. I'm hoping there might be some tool or something..
U8860 not responding
clint2rose said:
Ok. I will try to find a repair-center experienced in Huawei devices. I have one last question if you don't mind. Is it possible to erase everything on the phone? As in completely erase or reformat after which there will not be an operating system on the phone. I read in some threads that this is possible w/ custom recovery but I want to know if it is also possible for phones without the custom recovery. I'm hoping there might be some tool or something..
Click to expand...
Click to collapse
Have you find the solution yet? I have the same problem. Somehow my phone system is "locked". I can't install or uninstall app. Some google apps keep showing not responding. Everything changes i made, keep showing up after the phone rebooted.
This was happen a few days after I upgrade to ICS B932SP01 and rooted my phone (to remove original chinese apps).
Luckily i have friend in huawei indonesia. He gave my u8860 to the technical support. But the result was no good.
They try everything, even install my phone with the original GB and always failed.
The last suggestion is change the phone machine, which is as same as buy a new phone.
I really appreciate is someone can help me here...
Thanks
Disclaimer​
Code:
Neither Me Nor XDA Are Responsible If You Lose Your Job/Break Your Device.
Your Warranty Is Now Void
Downloads :
WIP
Instructions :
Extract The .rar
Open The Setup File And Install LG Flashtool
Right Click On The Shortcut Created On Your Desktop And Open File Location.
Copy The .dll Files From The DLL Folder To The Previously Opened Location And Replace The .dll In Flash Tool Folder If Any.
Open The Flashtool,Select The .dll Then The .tot/.bin File And You Are Ready To Flash The Firmware,Connect The Phone In Download Mode When Asked.
Note :
I Don't Know Whether It Works For N4 Converted Devices.I Had Successfully Flashed Stock .20 .bin File With It.But I Suggest To Use This Only When LGNPST Does Not Work/Fails To Flash The FW As For Me.Please Don't Perform Unwanted Experiments With Your Device Or It Will Result In A Hard Brick.
This Guide Was Originally Created By madmack @ Optimus G Pro Section So Thanks To Him.
I was Searching For The .dll File For Our Device And Found It So Decided To Create A Thread.And Those Who Are Thinking That The Required .dll Is The Same That We Use For LGNPST,NO,This Is A Different .dll
It Did Not Ask For Unlock Code When I Flashed The Stock JB FW.But As Posted By madmack there is A Possibility That It Can Ask For Your Unlock Code.So Proceed With Caution.
Again This Is A Alternate To LGNPST And Only I Have Successfully Flashed The Stock FW.It Is Recommended That Unless It Is Tested By 4-5 Experienced Users,Its A No Go For Noobs/New Users.
And Be Advised That This Process Will Wipe Your Internal Storage.
Enjoy!
Regards,
acervenky,
XPT
reserved
Thanks for sharing.
Edit: There are many more things to do in his (madmack) thread... Did u follow them all? Or for us we do not need all those steps? Let us know before someone bricks.. I use LGNPST but if anyone tries this.. at least they have a better understanding. thanks again for sharing.
just a heads up.. TeenyBin does not work in LG Flash. There are extra CRC checks which I haven't been able to bypass yet. This may change in the future.
also, not sure if this version of LG Flash is same as the newer one I use but I have to set the COM port to 40+ for LG flash to see my device.. altho maybe I'm missing something. I have to go into windows device manager and manually change the COM port used for the phone ( its in properties ).
LG Flash is no better or worse than LGNPST in my opinion. On the plus side.. there's no dll to register... and options are good
Googler_1976 said:
Thanks for sharing.
Edit: There are many more things to do in his (madmack) thread... Did u follow them all? Or for us we do not need all those steps? Let us know before someone bricks.. I use LGNPST but if anyone tries this.. at least they have a better understanding. thanks again for sharing.
Click to expand...
Click to collapse
Changed The Status To WIP.
Will Search For The Info And Update The Thread Soon
Regards,
acervenky,
XPT
autoprime said:
just a heads up.. TeenyBin does not work in LG Flash. There are extra CRC checks which I haven't been able to bypass yet. This may change in the future.
also, not sure if this version of LG Flash is same as the newer one I use but I have to set the COM port to 40+ for LG flash to see my device.. altho maybe I'm missing something. I have to go into windows device manager and manually change the COM port used for the phone ( its in properties ).
LG Flash is no better or worse than LGNPST in my opinion. On the plus side.. there's no dll to register... and options are good
Click to expand...
Click to collapse
Yup.
Regards,
acervenky,
XPT
Download link is missing.
I've try to found the download link for the Lg Flash tool on this page, but i haven't. Can you fix it or explain? Thanks anyway.
Which .TOT and .DLL files will you be providing? I need the .DLL and .TOT file for, of course, the AT&T Optimus G E-970 US version! I flashed my wifes phone cause it boot looped and the .TOT used was SUPPOSED to be this file but it is the Korean FW. Now my wifes phone will not update via OTA because it changed her IMEI number. I need to get her phone back to stock 4.1.2 US VERSION!
cougar214 said:
Which .TOT and .DLL files will you be providing? I need the .DLL and .TOT file for, of course, the AT&T Optimus G E-970 US version! I flashed my wifes phone cause it boot looped and the .TOT used was SUPPOSED to be this file but it is the Korean FW. Now my wifes phone will not update via OTA because it changed her IMEI number. I need to get her phone back to stock 4.1.2 US VERSION!
Click to expand...
Click to collapse
Here is the file you need to get her phone back to STOCK U.S: http://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip I'm not sure on the DLL file, I use LGNPST so not sure if they are the same but attached it also just incase you can use it.. stock firmware file above is a .tot file so if you need to you can just change it to .bin if you need to.
Thank you blake but no. That is the fw file that turned her phone Korean. So may people are under the impression this is the stock US fw but it isn't. I even had another person here check their phone and his too in fact says "Lg Electronics Korea".
cougar214 said:
Thank you blake but no. That is the fw file that turned her phone Korean. So may people are under the impression this is the stock US fw but it isn't. I even had another person here check their phone and his too in fact says "Lg Electronics Korea".
Click to expand...
Click to collapse
Where do you go check to see if its U.S or Korean?
All settings--> about phone -->phone Identity.
It's under settings-->about phone-->phone identity.
I had another person tell me that's normal because it's only the "manufacturer" info. Which im told this phone is manufactured in Korea. I don't know. All I do know is everyone is saying this is the stock fw for this phone but my wifes phone has changed. The start up screen is different and so is the shut down screen. Example, when her phone would shut down, she would get the AT&T logo and sound. After flashing this file she gets the blue circle and no sound. I do know that 4.1.2 is different depending on the region the phone is in. I don't know anything else that would explain this. Maybe this FW file WAS a different region but it was stripped out and converted somehow?
cougar214 said:
It's under settings-->about phone-->phone identity.
I had another person tell me that's normal because it's only the "manufacturer" info. Which im told this phone is manufactured in Korea. I don't know. All I do know is everyone is saying this is the stock fw for this phone but my wifes phone has changed. The start up screen is different and so is the shut down screen. Example, when her phone would shut down, she would get the AT&T logo and sound. After flashing this file she gets the blue circle and no sound. I do know that 4.1.2 is different depending on the region the phone is in. I don't know anything else that would explain this. Maybe this FW file WAS a different region but it was stripped out and converted somehow?
Click to expand...
Click to collapse
After a little checking I found out the same thing, It was normal as it was the place of manufacturer. I'm not sure what the problem might be but as far as I know that's the stock firmware for the phone.. You might try this one out http://www.androidfilehost.com/?fid=22901594685177912 you just boot into recovery do the normal wipes and flash through recovery, its supposed to be stock except for being rooted and as far as I know those are the only two stock files floating around for the phone...
Thanks Blake. Can you confirm for me that this phone will NOT get OTA updates if it's changed in any way, including rooting? It's what I was told by someone else. If that's the case then I guess there really is nothing wrong with the phone except those weird unexplained small changes.
I've got all the correct files download and I made it so far as to try to actually flash the phone, but it fails and gives me a wrong model number message because it's detecting my phone as a E960 (it's an E970). Any ideas? I had installed the latest CM11 ROM over some encrypted data and now I'm locked out (old encryption PIN doesn't work) and I can't restore it to stock.
can someone help me with a .tot or .bin stock for lg l70 d320n? cuz i"ve looked for it everywhere but couldn"t find anything
need help bad.
i got this phone from a friend and it originally had cm11 on it. the phone in question is the lg e970. i wanted to get back to stock. so i downloaded the correct firmware and added it to my external sd card. using twrp before i proceeded to wipe the phone via twrp. when it was finished i restarted the phone into twrp and went to install the stock firmware and i could not find my exsd card. twrp does not recognize it at all. so now im stuck with a phone with no os on it. i can ge into twrp and download mode, and when i just boot the phone it goes to lg logo and stays there. i need help in trying to figure out how to get stock firmware back on phone. i am used to samsung phones and odin. so im a noob when it comes to lg. i am very tech savy when it comes to computers. plzzzzzz any help would be great!!!!!!!! and appreciated
I can not add .tot file in LG flash tool
I have unrooted my lg g3 before on another computer. But i can't add the .tot file with my new computer. I am doing everything the same.
Does anyone have any ideas?
Hello, please help me.
I rooted my phone few months back and it was working fine.
I had the brilliant idea of trying to back everything up so i can install the stock rom to get the new 4.1.2 update on my note 2 from verizon.
I downloaded this recommended back up app that only works on rooted phones.
After i downloaded and installed, it went blank and it said i had an invalid system something and i needed to take to the verizon store.
I did that, they told me they cant help obviously because its a rooted phone
i tried following steps in installing the stock rom such as:
Getting odin:
Installing the driver:
But when i download the file from various sources and extract, it does not become a valid file name to load into odin.
I tried many roms and none of them work.
I tried extracting with 7zip win zip winrar, and nothing works.
I keep getting the file .xz
someone please help me get my phone back to work.
I cant do anything...now i get a new message saying the firware is invalid or something.
Im so desperate im not sure what else to do.
Thank you for reading this.
the .xz is fine. click on pda, then click on file extension and types, select all, the file should show up. select it, hit start and odin will verify the md5.