Hey guys, so I have LG G2 Mini D620R rooted Android 5.0.2 (I think). So here is the problem: whenever I try to access settings it says: ''Unfortunatelly, Settings has stopped.'' This problem happened to me few times and I solved it with LG Mobile Support Tool, it just downloads full software from internet and install it to my phone. But now I can not do that. I try to do that when my phone is on but my computer don't recognize my device and I can not select connectivity on my phone because I can not get into settings. Last time I solved this problem going to download mode an that worked. Now when I go to download mode my computer does not recognize my phone. My phone is fully functionally and I can play games, use apps, I can do anything, just I can't go in Settings and thats just annoying. Even Bluetooth is crashing and calendar. I thing this problem came because I removed some apps that came pre installed like bloatware. I think it's because of Easy Home app which is some sort of launcher. Thanks for you reply.
Download the appropriate kdz file for your device(http://lg-phone-firmware.com/index.php?id_mod=57) and flash it using lg flash tool 2014(http://forum.xda-developers.com/showthread.php?t=2797190). After that be carefull of which stock apps you will delete so that the problem does not appear again!
Yes I found tutorial to do that and there is problem. I downloaded kdz and LG Flash Tool and done all needed but whe process goes then LG Mobile Support Tool runs for 15% and message pops out ant it says that it can not find phone. I spam reply but nothing. Just my computer does not recognize my mobile phone and thats it.
G1ML1 said:
Yes I found tutorial to do that and there is problem. I downloaded kdz and LG Flash Tool and done all needed but whe process goes then LG Mobile Support Tool runs for 15% and message pops out ant it says that it can not find phone. I spam reply but nothing. Just my computer does not recognize my mobile phone and thats it.
Click to expand...
Click to collapse
Do you flash the kdz while the phone is in download mode?
gismoO said:
Do you flash the kdz while the phone is in download mode?
Click to expand...
Click to collapse
This is what I have done: I turned off phone then I have connected USB to my PC and then went in download mode. Then I have downloaded kdz file and LG Flash Tool. Then I put kdz file into LGFT and I have started process. LG Mobile Support Tool pops out. Everything went OK until message pops out saying there's no connected phone.
G1ML1 said:
This is what I have done: I turned off phone then I have connected USB to my PC and then went in download mode. Then I have downloaded kdz file and LG Flash Tool. Then I put kdz file into LGFT and I have started process. LG Mobile Support Tool pops out. Everything went OK until message pops out saying there's no connected phone.
Click to expand...
Click to collapse
1. Check that your device appears in windows device manager.
2. Run Lg flash tool as administrator.
3. Check that you have the appropriate lg driver.
4. Try another micro-usb cable.
5. Try flashing it through another pc/ different windows version.
6. Do a cse and not a normal flash.
7. Try using emergency mode instead of DIAG (in cse mode).
8. If the above do not work, consider unlocking the bootloader, install TWRP custom recovery, install CM13 and feel the difference..
Hey I installed CWM 13 and Android 6 but I forgot to put GApps in it. How can I install GApps?
Hey again, so I installed GApps but I get crashes and I can not use phone. When phone boots I get to lock screen then I draw pattern and I got several crashes. I rebooted it few times but its same.
G1ML1 said:
Hey again, so I installed GApps but I get crashes and I can not use phone. When phone boots I get to lock screen then I draw pattern and I got several crashes. I rebooted it few times but its same.
Click to expand...
Click to collapse
Use Pico version.
Sent from my LG G2 Mini using XDA Labs
Vagelis1608 said:
Use Pico version.
Sent from my LG G2 Mini using XDA Labs
Click to expand...
Click to collapse
Hey, can you tell me what should I do now? I can't go into recovery mode because I can't run anything on phone. What should I do?
G1ML1 said:
Hey, can you tell me what should I do now? I can't go into recovery mode because I can't run anything on phone. What should I do?
Click to expand...
Click to collapse
Download Pico version of GAPPS on your PC and put it on an SD.
Use the hardware key combination to enter recovery mode.
Sent from my LG G2 Mini using XDA Labs
Vagelis1608 said:
Download Pico version of GAPPS on your PC and put it on an SD.
Use the hardware key combination to enter recovery mode.
Sent from my LG G2 Mini using XDA Labs
Click to expand...
Click to collapse
THANKS MAN, thanks to all who responded, thanks xda community, thanks to all who looked at this thread.
My device is working now and I have GApps. Cheers!
Related
My LG D605 does not boot and I have a black screen. Before brick i go via ADB to recovery on official KK. Mobile is dead USB dont work
I have the same problem help!!!
LoToR122 said:
My LG D605 does not boot and I have a black screen. Before brick i go via ADB to recovery on official KK. Mobile is dead USB dont work
Click to expand...
Click to collapse
No responses to Emergency mode flashing by KDZ?
Try at least with HARD RESET... Hold Power Key + Volumen Down key + Home key
When LG logo appears, release all the keys! Good luck!
LoToR122 said:
My LG D605 does not boot and I have a black screen. Before brick i go via ADB to recovery on official KK. Mobile is dead USB dont work
Click to expand...
Click to collapse
Give me a pm when you have 1 hour I might have an idea to save you.
christi9503 said:
Give me a pm when you have 1 hour I might have an idea to save you.
Click to expand...
Click to collapse
Can you help me? pls
kikobuendia said:
I have the same problem help!!!
Click to expand...
Click to collapse
First, there is no such thing as hardbrick (not anymore, most modern phones cant be hardbriked )
Be sure, u have all the drives and whatnots installed in the copmuter !
from: http://forum.xda-developers.com/showthread.php?t=2730501
[Q] How to install a .kdz?
[A] (Tutorial thanks to @[W]ar[H]ead, confirmed working by TaZRAge)
#1) First to get into download mode:
1. Remove battery
2. Put usb to computer and phone (w/o battery)
3. Hold "Vol up" button
4. Put battery back
You will get into download mode (aka emergency mode).
#2) Unpack kdz flasher, and install msxml.msi.
#3) Run KDZ_FW_UPD.exe set "type" to 3GQCT and "phonemode" to DIAG.
#4) Choose the .kdz file to flash. Download link is under the "Downloads"
#5) Click "Launch software update" and wait. Phone must be connected in download mode(!). KDZ installer might get stuck but DO NOT disconnect it. (Unless it stays that way for a hour as a example)
NOTE: .kdz is a .kdz, you cannot extract it. If you get a .zip from the LG .kdz site you did something wrong.
Cisf said:
First, there is no such thing as hardbrick (not anymore, most modern phones cant be hardbriked )
Be sure, u have all the drives and whatnots installed in the copmuter !
from: http://forum.xda-developers.com/showthread.php?t=2730501
[Q] How to install a .kdz?
[A] (Tutorial thanks to @[W]ar[H]ead, confirmed working by TaZRAge)
#1) First to get into download mode:
1. Remove battery
2. Put usb to computer and phone (w/o battery)
3. Hold "Vol up" button
4. Put battery back
You will get into download mode (aka emergency mode).
#2) Unpack kdz flasher, and install msxml.msi.
#3) Run KDZ_FW_UPD.exe set "type" to 3GQCT and "phonemode" to DIAG.
#4) Choose the .kdz file to flash. Download link is under the "Downloads"
#5) Click "Launch software update" and wait. Phone must be connected in download mode(!). KDZ installer might get stuck but DO NOT disconnect it. (Unless it stays that way for a hour as a example)
NOTE: .kdz is a .kdz, you cannot extract it. If you get a .zip from the LG .kdz site you did something wrong.
Click to expand...
Click to collapse
You don't know what you are saying. You can HARDBRICK ANY modern device. By definition hardbrick means phone won't turn on won't respond and in some cases recognized as usb when connected to pc as usb bulk or qcom usb. etc. You damage the second bootloader and tell me what happens. You will see what you get.
christi9503 said:
You don't know what you are saying. You can HARDBRICK ANY modern device. By definition hardbrick means phone won't turn on won't respond and in some cases recognized as usb when connected to pc as usb bulk or qcom usb. etc. You damage the second bootloader and tell me what happens. You will see what you get.
Click to expand...
Click to collapse
first this is offtopic. Second, u are wrong ! Unless the phone is pshisicaly damaged (misfuctioning components or damaged), u cant hardbrick the phone with uploading different soft. on it (unless u change voltages and overclok, if that is possible on the device). Ofecourse they are exceptions, but all major modern manufactors, make hardbrick proof devices. Also, how exactly would u modify the emergency mode, and more important even if you could, why wold u do it !?
More on to the topic, none of the operations of rooting, bootloader installing, kdz install or CMx install , gets near the emergency mode. It remains intact.
Just retry all normal steps for installing kdz or recovery again, check the cables, all drivers on pc, and is best to have a charged phone battery.
EDIT: @kikobuendia
i found this post, same operations as mentioned in first reply, but more detailed:
http://forum.xda-developers.com/opt...optimus-l9-ii-lg-d605-unroot-unbrick-t2964693
Cisf said:
first this is offtopic. Second, u are wrong ! Unless the phone is pshisicaly damaged (misfuctioning components or damaged), u cant hardbrick the phone with uploading different soft. on it (unless u change voltages and overclok, if that is possible on the device). Ofecourse they are exceptions, but all major modern manufactors, make hardbrick proof devices. Also, how exactly would u modify the emergency mode, and more important even if you could, why wold u do it !?
More on to the topic, none of the operations of rooting, bootloader installing, kdz install or CMx install , gets near the emergency mode. It remains intact.
Just retry all normal steps for installing kdz or recovery again, check the cables, all drivers on pc, and is best to have a charged phone battery.
EDIT: @kikobuendia
i found this post, same operations as mentioned in first reply, but more detailed:
http://forum.xda-developers.com/opt...optimus-l9-ii-lg-d605-unroot-unbrick-t2964693
Click to expand...
Click to collapse
I am not gonna reply again but I am just saying you have no idea. Do not talk unless you are sure you can hardbrick any device with just root and just writing on second bootloader partition. Read about it if you don't know. Do not argue about it.
I can't get into download mode
kikobuendia said:
I can't get into download mode
Click to expand...
Click to collapse
Then that's a hard brick pretty much. Pull the battery out and connect the phone to PC. Tell me if it gets recognized.
EDIT: OFC wait like 6 seconds then put it back and after that connect to USB.
When i connect it pc makes a sound
kikobuendia said:
When i connect it pc makes a sound
Click to expand...
Click to collapse
I don't care if it makes a sound or not it's like it gets recognized? Look into device manager.
christi9503 said:
I don't care if it makes a sound or not it's like it gets recognized? Look into device manager.
Click to expand...
Click to collapse
Yes but flashtool doesnt recognize it
kikobuendia said:
Yes but flashtool doesnt recognize it
Click to expand...
Click to collapse
If you want to get this fixed just listen to me. It won't work like this tell me the answers to my questions and we might solve your problem. What is your device recognized as. Make me a screenshot of device manager if you can't explain.
neutrondev said:
Then that's a hard brick pretty much. Pull the battery out and connect the phone to PC. Tell me if it gets recognized.
EDIT: OFC wait like 6 seconds then put it back and after that connect to USB.
Click to expand...
Click to collapse
I have the same probalem, cant get to download mode, when i connect to pc it recognise it in hs usb qdloader 9008, any solutions to fix it. I flashed wrong .tot file.
did you managed to unbricked it?
I have the same probalem, cant get to download mode, when i connect to pc it recognise it in hs usb qdloader 9008, any solutions to fix it. I flashed wrong .tot file.
Click to expand...
Click to collapse
No, no luck yet. Seems to be impossible.
I connect to this post cuz my d605 is also facing a similiar issue, no system, no recovery, no adb, download mode worked only twice, for the rest, only emergency mode works, phone cannot even charge.
Phone is recognized from pc, I uninstalled modem drivers but stays in Emergency only few seconds then it shuts down (not sure if its the battery, since it doesn't charge as well). It shuts down actually at the moment that LG mobile support tool seems to recognize it.
It worked couple of times, phone was keeping staying in emergency mode for the beginning of the procedure but at the moment it need to put the kdz into the phone, the phone die.
The two times download mode worked, same, just shutting down immediately. This with LG support tool or LG flashtool2014.
KDZ_FW_UPD worked the first time after install and then doesn't run anymore, on two different Win10 machines.
I have no idea how to come out of this nightmare, just want to flash it :/
Ag0n1a said:
I connect to this post cuz my d605 is also facing a similiar issue, no system, no recovery, no adb, download mode worked only twice, for the rest, only emergency mode works, phone cannot even charge.
Phone is recognized from pc, I uninstalled modem drivers but stays in Emergency only few seconds then it shuts down (not sure if its the battery, since it doesn't charge as well). It shuts down actually at the moment that LG mobile support tool seems to recognize it.
It worked couple of times, phone was keeping staying in emergency mode for the beginning of the procedure but at the moment it need to put the kdz into the phone, the phone die.
The two times download mode worked, same, just shutting down immediately. This with LG support tool or LG flashtool2014.
KDZ_FW_UPD worked the first time after install and then doesn't run anymore, on two different Win10 machines.
I have no idea how to come out of this nightmare, just want to flash it :/
Click to expand...
Click to collapse
well, sorry for not replying earlier. My phone was on guarantee for about 2 months after I wrote the post. I just send it to LG Hellas via the e-shop I bought it from and in about 2-3 weeks, I had my D605 back like it was brand new. I searched a lot about my D605 hard bricked and I found that it is not fixable. My phone could not go into download mode though, as yours. Hope I helped you even a lil bit. Sorry for my bad English.
Hello guys!
I have read everything here on this topic, but I have some questions that I need answered:
I used this "super easy" root method with that chinese application http://forum.xda-developers.com/showthread.php?t=2439667
I then used the root checker app and it said that the phone is rooted.
And then I used Flashify to flash a clockwork recovery image onto my LG L9 and it flashed okay, but when I rebooted the phone it said Security Error on the LG screen.
Please tell me there is a way to fix this without erasing all the data on the phone...........
Thank You very much in advance!
I somehow managed to install that firmware, but now everything is inverted and backwards. Touchscreen is barely functioning. Even the colors are not the same. I did a hard reset but it keeps on being inverted.
My phone have the T-Mobile logo on top, I dont know which kdz and from where should I download it.
sqnkov said:
I somehow managed to install that firmware, but now everything is inverted and backwards. Touchscreen is barely functioning. Even the colors are not the same. I did a hard reset but it keeps on being inverted.
My phone have the T-Mobile logo on top, I dont know which kdz and from where should I download it.
Click to expand...
Click to collapse
Can you access "Backup" app by LG?
If so, make an backup of all you have in the phone, place it in your PC (or somewhere safe), connect your phone to PC, and install LG Mobile Support Tool. After it is installed, open it, click Options and then Upgrade Recovery.
All files and saves from the phone will be lost (except SD Card), but when the program finishes restoring system, you will be able to restore your saves, apps, settings etc. back.
Don't forget to backup and but it in your PC!
After restoring the system, put backup file back in your phone, then enter in "Backup" app, and then restore.
Hope it was clear
mihai.apostu98 said:
Can you access "Backup" app by LG?
If so, make an backup of all you have in the phone, place it in your PC (or somewhere safe), connect your phone to PC, and install LG Mobile Support Tool. After it is installed, open it, click Options and then Upgrade Recovery.
All files and saves from the phone will be lost (except SD Card), but when the program finishes restoring system, you will be able to restore your saves, apps, settings etc. back.
Don't forget to backup and but it in your PC!
After restoring the system, put backup file back in your phone, then enter in "Backup" app, and then restore.
Hope it was clear
Click to expand...
Click to collapse
Yes, you were clear enough, but I CAN NOT access LG recovery neither I can NOT install Clockwork mod. The only thing I get is the inverted touchscreen phone and the S/W upgrade mode...
How can I install CWM or enter any kind of recovery??
This is my second day trying to fix this, I am getting mad.
P.S. I have backed up everthing before that.
sqnkov said:
Yes, you were clear enough, but I CAN NOT access LG recovery neither I can NOT install Clockwork mod. The only thing I get is the inverted touchscreen phone and the S/W upgrade mode...
How can I install CWM or enter any kind of recovery??
This is my second day trying to fix this, I am getting mad.
P.S. I have backed up everthing before that.
Click to expand...
Click to collapse
So enter in S/W upgrade mode, then connect your phone to PC and do as i said. Install LG Mobile Support Tool, after installing open LG Mobile Support Tool, click Options, then click Upgrade Recovery (all this stuff is in LG Mobile Support Tool, not in your phone, your phone needs to be in S/W upgrade mode)
It will install official KDZ from LG servers to your phone, and it will be like new.
mihai.apostu98 said:
So enter in S/W upgrade mode, then connect your phone to PC and do as i said. Install LG Mobile Support Tool, after installing open LG Mobile Support Tool, click Options, then click Upgrade Recovery (all this stuff is in LG Mobile Support Tool, not in your phone, your phone needs to be in S/W upgrade mode)
It will install official KDZ from LG servers to your phone, and it will be like new.
Click to expand...
Click to collapse
I understand this. But it doesn't do anything. I have to enter the IMEI for the Recovery Update to start, and after it connects the phone it stops at the download phase where the timer stops and NOTHING happens.
Check the Driver
sqnkov said:
I understand this. But it doesn't do anything. I have to enter the IMEI for the Recovery Update to start, and after it connects the phone it stops at the download phase where the timer stops and NOTHING happens.
Click to expand...
Click to collapse
Make sure your phone is being recognised under Devices in control panel.
Regards,
SS
sqnkov said:
Hello guys!
I have read everything here on this topic, but I have some questions that I need answered:
I used this "super easy" root method with that chinese application http://forum.xda-developers.com/showthread.php?t=2439667
I then used the root checker app and it said that the phone is rooted.
And then I used Flashify to flash a clockwork recovery image onto my LG L9 and it flashed okay, but when I rebooted the phone it said Security Error on the LG screen.
Please tell me there is a way to fix this without erasing all the data on the phone...........
Thank You very much in advance!
Click to expand...
Click to collapse
I did the exact same thing as you, as soon as i rooted it i should have stopped its really all i needed, but no i had to go one step further and use flashify to install clockwork and yep when it rebooted i got the security error. The main issue i am having is that no matter what i try to do its like the phone is not being detected or seen by the programs via usb. i have installed the fastboot drivers, i have installed the lg united drivers, i let the support program install the drivers, still nothing. as soon as i plug in the usb to the phone windows pops up a message saying device not recognized, even though i see the lg united drivers in device manager under ports.
curiousgeorge23 said:
I did the exact same thing as you, as soon as i rooted it i should have stopped its really all i needed, but no i had to go one step further and use flashify to install clockwork and yep when it rebooted i got the security error. The main issue i am having is that no matter what i try to do its like the phone is not being detected or seen by the programs via usb. i have installed the fastboot drivers, i have installed the lg united drivers, i let the support program install the drivers, still nothing. as soon as i plug in the usb to the phone windows pops up a message saying device not recognized, even though i see the lg united drivers in device manager under ports.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2779985
I followed the same damn instructions from @cmahendra that you did and as soon as I got it rooted, I installed CWM via flashify and it rebooted and then BAM! " Security Error" and now I can't do anything with this phone.
I can't get into the "software" or "Download mode. When connecting to my Windows computer, it's not detected in Device manager, it just makes the sound like a device was connected, then immediately disconnected.
I have the LG Mobile Support Tool, but it doesn't work because the PC can't detect/install drivers for the phone. It has been detected for a short period a handful of times and is being detected as an OMAP 4430.
I have the LGT Universal driver pack as well and that doesn't help anything either.
gorilla p said:
http://forum.xda-developers.com/showthread.php?t=2779985
I followed the same damn instructions from @cmahendra that you did and as soon as I got it rooted, I installed CWM via flashify and it rebooted and then BAM! " Security Error" and now I can't do anything with this phone.
I can't get into the "software" or "Download mode. When connecting to my Windows computer, it's not detected in Device manager, it just makes the sound like a device was connected, then immediately disconnected.
I have the LG Mobile Support Tool, but it doesn't work because the PC can't detect/install drivers for the phone. It has been detected for a short period a handful of times and is being detected as an OMAP 4430.
I have the LGT Universal driver pack as well and that doesn't help anything either.
Click to expand...
Click to collapse
yes thats the one i followed, for the love of god could someone please tell me how to get these drivers intalled, everytime i install lg united drivers i cant install omap, if i can get omap installed then i cant get lg united drivers, one time i was able to have both installed i have no idea how i was so confused at that time cause i had tried so much stuff, but windows was still saying usb device not recognized. and i tried the offline fix mode but it got stuck at 15 percent something about phone not connected thru usb. even when i have omap or lg drivers installed and plug the phone in it is not activating in device manager i can only see it in hidden mode.
Same here. I asked for help and was accuses of blaming him and not asking respectfully enough. Idk what to do with this thing.
Hi,
I installed Lenovo P780 VibeUI 2.0 version: VIBEUI_V2.0_1512_DEV_P780 and gapps-kk-20150404-minimal-edition-signed.zip.
Then I installed Google Calendar from Play Store. Unfortunately it doesn't sync. If I go to settings/accounts/google there is no "google calendar data" option to choose.
marekjarosz said:
Hi,
I installed Lenovo P780 VibeUI 2.0 version: VIBEUI_V2.0_1512_DEV_P780 and gapps-kk-20150404-minimal-edition-signed.zip.
Then I installed Google Calendar from Play Store. Unfortunately it doesn't sync. If I go to settings/accounts/google there is no "google calendar data" option to choose.
Click to expand...
Click to collapse
Try to install full gapps pack.
Sent from my Lenovo P780
stympy said:
Try to install full gapps pack.
Click to expand...
Click to collapse
Any recommended source?
marekjarosz said:
Any recommended source?
Click to expand...
Click to collapse
Try the pack from cyanogen.
Sent from my SMT TAB 704DC
stympy said:
Try the pack from cyanogen.
Click to expand...
Click to collapse
Unfortunately I used [GApps][4.4.2][AROMA]_Aroma_Installer_GApps-v1.5.2 and didn't wipe data before/after. After rebooting the phone got "Lenovo launcher stopped, must be closed". After swithching the phone off and on end up with an infinite bootloop.
I rebooted the phone into recovery mode and wiped data, cache and dalvik and tried to reinstall VIBEUI_V2.0_1512_DEV_P780. After the first launch there is only a chinese text (I guess it might be some error, after clicking the button the same error apears again and again).
I tried to flash a custom revovery (as I end up with a Lenovo-Recovery with nothing to do) with a Flash Tool V5.13.52.200 as described in other thread but after clicking "download" and connecting the phone nothing happens (phone shows red light and a battery charge screen). The phone is recognized by the PC (Win 7) as even after turning the phone on again it is possible to upload files to the SD card using windows explorer.
marekjarosz said:
Unfortunately I used [GApps][4.4.2][AROMA]_Aroma_Installer_GApps-v1.5.2 and didn't wipe data before/after. After rebooting the phone got "Lenovo launcher stopped, must be closed". After swithching the phone off and on end up with an infinite bootloop.
I rebooted the phone into recovery mode and wiped data, cache and dalvik and tried to reinstall VIBEUI_V2.0_1512_DEV_P780. After the first launch there is only a chinese text (I guess it might be some error, after clicking the button the same error apears again and again).
I tried to flash a custom revovery (as I end up with a Lenovo-Recovery with nothing to do) with a Flash Tool V5.13.52.200 as described in other thread but after clicking "download" and connecting the phone nothing happens (phone shows red light and a battery charge screen). The phone is recognized by the PC (Win 7) as even after turning the phone on again it is possible to upload files to the SD card using windows explorer.
Click to expand...
Click to collapse
Hi. Try to reflash using SP Flash Tool v5 from my post Rooting Tutorial for KK.
I use ONLY those tools. Tested and modified for P780.
Sent from my Lenovo P780
stympy said:
Hi. Try to reflash using SP Flash Tool v5 from my post Rooting Tutorial for KK.
I use ONLY those tools. Tested and modified for P780.
Click to expand...
Click to collapse
I used exactly those tools, but with a results described below:
I tried to flash a custom revovery (as I end up with a Lenovo-Recovery with nothing to do) with a Flash Tool V5.13.52.200 as described in other thread but after clicking "download" and connecting the phone nothing happens (phone shows red light and a battery charge screen).
Click to expand...
Click to collapse
marekjarosz said:
I used exactly those tools, but with a results described below:
Click to expand...
Click to collapse
seems to me that your phone is no longer detected by your computer !
se this:
1. go to device manager
2. with device manager window open plug your phone
3. in device manager in Ports tab something like MTK 65XX... will appear for 1 or 2 secconds
Tell me if this is going on !
stympy said:
seems to me that your phone is no longer detected by your computer !
se this:
1. go to device manager
2. with device manager window open plug your phone
3. in device manager in Ports tab something like MTK 65XX... will appear for 1 or 2 secconds
Tell me if this is going on !
Click to expand...
Click to collapse
My device is detected by my computer as I am able to copy files to SD card using windows explorer. I plug the phone and I see "Lenovo P780" in My Computer, then I open it and get access to internal memory and SD card.
BUT - I do not see it in the Device Manager at all... Maybe I will try to do it on the other Windows computer?
marekjarosz said:
My device is detected by my computer as I am able to copy files to SD card using windows explorer. I plug the phone and I see "Lenovo P780" in My Computer, then I open it and get access to internal memory and SD card.
BUT - I do not see it in the Device Manager at all... Maybe I will try to do it on the other Windows computer?
Click to expand...
Click to collapse
Try what i told you with the phone powered off!
The computer must have windows XP or windows 7!
Good Luck.
stympy said:
seems to me that your phone is no longer detected by your computer !
se this:
1. go to device manager
2. with device manager window open plug your phone
3. in device manager in Ports tab something like MTK 65XX... will appear for 1 or 2 secconds
Tell me if this is going on !
Click to expand...
Click to collapse
After connecting switched-off phone to the USB port MT65xx Preloader appears in the Device Manger for 1-2 seconds.
marekjarosz said:
After connecting switched-off phone to the USB port MT65xx Preloader appears in the Device Manger for 1-2 seconds.
Click to expand...
Click to collapse
Hi. You are lucky. Your phone is detected by your computer !
All you have to do is to flash a custom recovery TWRP CN Version.
After this you could download your firmware again and put it on sd card ! reboot to recovery wipe and reflash your firmware !
stympy said:
Hi. You are lucky. Your phone is detected by your computer !
All you have to do is to flash a custom recovery TWRP CN Version.
After this you could download your firmware again and put it on sd card ! reboot to recovery wipe and reflash your firmware !
Click to expand...
Click to collapse
Thanks for your reply, but as I wrote before I don't really know how to achieve it as it is not possible to do it using Flash Tool
marekjarosz said:
Thanks for your reply, but as I wrote before I don't really know how to achieve it as it is not possible to do it using Flash Tool
Click to expand...
Click to collapse
If you want i can help you. All you need is a connection by team viewer.
Sent from my Lenovo P780
I used [TUT] Instructions MTK6577 USB VCOM Driver Installation to install a proper driver and was able to flash a custom ROM to make it work as suppose to and was able to do the rest without any problems.
Thank you
Hay guys,
I got a big problem, yesterday I tryed to downgrade my brothers LG P760 and made a big misstake.
When I tryed to go into 'recovery mode', I just used the wrong keys (VOL DOWN + HOME + POWER ON/OFF). Now my phone doesn't boot up anymore, it just hangs at the LG bootlogo. I can go into 'S/W Mode' and into 'Fastboot Mode', but if I go into 'Fastboot Mode' my decive driver is hangs in a loop. Hanging all day and night to fix this problem, but I can't do anything.... I hope anyone can help me!
Windows OS: Windows 10
Phone: LG P760
ROM: CM 12.1
Thanks a lot!
See this page... http://lgflashtool.com/
puntoazul said:
See this page... http://lgflashtool.com/
Click to expand...
Click to collapse
Yea, this is the last tool I used and it went fast as nothing else yet, but while flashing the stock firmware it doesn't continue at 60% and saying "Verifying phone connection...".
And does it work with Windows 10?
Thanks for your help!
Fastboot & L9 & Win10 ain't good for me, too.
But D/L mode is more basic and thus more reliable. And there are basically two ways to unbrick, online with the official LG tool, and with LG Flash Tool 2014 and a KDZ image. Only the first option works without problems for me.
lecorbusier said:
Fastboot & L9 & Win10 ain't good for me, too.
But D/L mode is more basic and thus more reliable. And there are basically two ways to unbrick, online with the official LG tool, and with LG Flash Tool 2014 and a KDZ image. Only the first option works without problems for me.
Click to expand...
Click to collapse
Thanks for your time and answere!
Yea, I also think it's the Windows 10 which makes problems, I can't get any driver installed for this P760.
So I can just download the official lg support tool and try it this way?
EDIT: And btw... I did exactly the second step already and had also problems. I didn't did the D/L mode step yet. Can you explain how it works, I don't know how to come into D/L mode.
Thanks!
In da other Thread! In D/L mode the phone should get recognized by LG driver and a virtual com port be installed. LG software only works with LG drivers, and they sometimes don't recognize the phone, except in D/L mode.
Fir other purposes the Google SDK usb drivers are best, but then there's the Fastboot issue. But ADB should work.
lecorbusier said:
In da other Thread! In D/L mode the phone should get recognized by LG driver and a virtual com port be installed. LG software only works with LG drivers, and they sometimes don't recognize the phone, except in D/L mode.
Fir other purposes the Google SDK usb drivers are best, but then there's the Fastboot issue. But ADB should work.
Click to expand...
Click to collapse
The 'LG Mobile Support Tool' says that the right firmeware is already installed and then he is starting to download V20O with 599,15MByte. But the thing is, that the phone will just go out of the S/W mode while the 'LG Mobile Support Tool' is downloading the V20O. After the phone switched off, my driver is looping and always saying it can't recnogrize it. It does it like 20 times and then the phone will go on and LG logo appears. Nothing more.... :/
My P760 never quit D/L mode before or during download. Afterwards LGs recovery may appear, which calls itself something like Service Mode. This is not good, though the stock rom should initially work, but there are problems when rooting etc. In such a case leave phone connected and flash a second time. The phone should reboot to the launcher, if successful.
Hi,
i have Lg G2 D802 European (UK purchase) model phone of which is password locked, it was used by one of my family member and they have forgotten the Password. its in stock firmware.
here are the bellow issue i am facing;
1. USB Debugging mode is not activated
2. phone doesn't boot up to Recovery (for some reason its not going to recovery- key combination doesn't work)
3. wifi and Data was not active before its getting locked.
all i have is download mode. which is not been quite help. i have also user's Google account details which is also not been a help as WIFI/DATA is not being connecting.
I tried with LG suite, phone is getting recognized
i tried ADB, but phone doest get recognized to execute the command .
i tried almost all method which was provided in the XDA and couldn't get to their.
Please advice.
in this case you have only one option left and that is make reflash stock rom using download mode.
as you described debugging is off, No Data Connection, Recovery isn't accessible. you are simply locked away from any way to unlock your device
Download the stock Rom and flash it using Odin.
And remember one thing, always make sure USB Debugging is enabled, it really helps in such cases.
all the best
Hit Thanks if helped.
abhinavp649 said:
in this case you have only one option left and that is make reflash stock rom using download mode.
as you described debugging is off, No Data Connection, Recovery isn't accessible. you are simply locked away from any way to unlock your device
Download the stock Rom and flash it using Odin.
And remember one thing, always make sure USB Debugging is enabled, it really helps in such cases.
all the best
Hit Thanks if helped.
Click to expand...
Click to collapse
Odin Dint detect my phone in download mode.
akshayhgd said:
Odin Dint detect my phone in download mode.
Click to expand...
Click to collapse
I'm so sorry that was so dumb of me, obviously it will not detect because you have a LG Device And ODIN is SAMSUNG handsets only.
you can factory reset your phone, just follow this tutorial:
https://www.youtube.com/watch?v=3ogBvzbPikc
abhinavp649 said:
I'm so sorry that was so dumb of me, obviously it will not detect because you have a LG Device And ODIN is SAMSUNG handsets only.
you can factory reset your phone, just follow this tutorial:
https://www.youtube.com/watch?v=3ogBvzbPikc
Click to expand...
Click to collapse
Tried - dint work, as i i mentioned earlier this key combination is not working though Volume down button works.
Guys, any suggestion? or any method to wipe or restore?
please advice.
akshayhgd said:
Guys, any suggestion? or any method to wipe or restore?
please advice.
Click to expand...
Click to collapse
I don't know why the Recovery Combination isn't working.
The last option is left to take your phone any service center and let them do the technical work. and also ask them a way to access recovery.