Related
So far, loving the LG G3, but I noticed the chargers that used to charge my S3 seem to not be compatible with my LG G3. In my car I have a 3.1A charger and I tried both ports and received a red X on the battery icon saying that charging has stopped because it is not supported and may damage the phone. I know that the adapter that it comes with is 1.8A, so 2amps from a car charger should be fine, could it be the wire?
Also tried using a wall ac adapter (previously used to power Chromecast but using USB power instead) and that also gave me the same error, even though that one is also 2.1A
xdstx said:
So far, loving the LG G3, but I noticed the chargers that used to charge my S3 seem to not be compatible with my LG G3. In my car I have a 3.1A charger and I tried both ports and received a red X on the battery icon saying that charging has stopped because it is not supported and may damage the phone. I know that the adapter that it comes with is 1.8A, so 2amps from a car charger should be fine, could it be the wire?
Also tried using a wall ac adapter (previously used to power Chromecast but using USB power instead) and that also gave me the same error, even though that one is also 2.1A
Click to expand...
Click to collapse
The one thing I've noticed with my G3 is that it's extremely hard to plug any other charger into the phone other than the stock g3 one... I almost thought the port on the phone was junk since my fairly new S4 USB charger should easily fit into this phone.... So I don't know.
Just something quarky with this phone I think..
Sent from my VS985 4G using Tapatalk
G2 was same way. These phones are extremely picky on which cable is used to charge it.
Sent from Bad Azz VZW LG G2 Cyan Tapatalk
moosc said:
G2 was same way. These phones are extremely picky on which cable is used to charge it.
Sent from Bad Azz VZW LG G2 Cyan Tapatalk
Click to expand...
Click to collapse
do you know why? is there an adapter needed?
i have tons of micro usb's and would prefer not to buy more lol
Nope only thing i think is the chips charge faster. Thats why some chargers or cords say slow charging. Real pia
kevlo911 said:
do you know why? is there an adapter needed?
i have tons of micro usb's and would prefer not to buy more lol
Click to expand...
Click to collapse
Sent from Bad Azz VZW LG G2 Cyan Tapatalk
Eeenteresting...Stock charger, Dell tablet charger, Griffin mini dual port car charger and miscellaneous Monoprice cords all charge my phone full speed without any warning pop-ups.
I am new to the nexus 6 and I have a wireless charger I bought for me G2. It came with a wireless pad and cable. It says to use the charger your phone came with.
Well our Nexus 6's come with the super chargers...
Is it OK to use the wireless charger pad with our power chargers? Or should I purchase a 2 amp (or something different) charger to use with the wireless pad?
Just looking for advice. Thank you.
Sent from my Nexus 6 using XDA Free mobile app
You can use the g2 charger as-is. It will just be slow. Won't damage the phone..
Well I sold the g2 with the charger. So I have the charger the nexus 6 came with. I am fine with slow charging as I put it on the pad then sleep at night. I just don't want to burn something up because we have the new style chargers. Maybe I'm wrong but I wanted to ask. Better safe than sorry.
Sent from my Nexus 6 using XDA Free mobile app
The turbo charger adapts to what it is connected to... I charge my sony sw3 smartwatch with the turbo charger every night. It doesn't feel any faster.
kmcrane said:
I am new to the nexus 6 and I have a wireless charger I bought for me G2. It came with a wireless pad and cable. It says to use the charger your phone came with.
Well our Nexus 6's come with the super chargers...
Is it OK to use the wireless charger pad with our power chargers? Or should I purchase a 2 amp (or something different) charger to use with the wireless pad?
Just looking for advice. Thank you.
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
http://www.amazon.com/BlackBerry-ACC-39343-301-Original-Micro-USB-Blackberry/dp/B005OD89MY/ref=sr_1_3?ie=UTF8&qid=1440020348&sr=8-3&keywords=blackberry+playbook+charger
This is probably the best one to use for QI Chargers.
I have about 5 of them I use for the 2 QI Chargers I have and for traveling.
I contacted the manufacturer of my qi charger and they said that I needed a 1.8 amp minimum charger to work the 3 coil system. They actually sell a 2 amp add on one. They had the answer all along.. I appreciate all the responses and help.
Sent from my Nexus 6 using XDA Free mobile app
kmcrane said:
I contacted the manufacturer of my qi charger and they said that I needed a 1.8 amp minimum charger to work the 3 coil system. They actually sell a 2 amp add on one. They had the answer all along.. I appreciate all the responses and help.
Click to expand...
Click to collapse
The standard turbo charger of the N6 has a capacity of 1,6 A. When the device connected is suitable for turbo (like the N6) it switches to turbo mode 1 or to mode 2 by setting the Volt to 9 or 12 V, but only when the battery is charged below 78%.
The wireless QI charging pads from China are connected to chargers with a capacity of 1 A. at 5 V.
This way of wireless charging works for my Nexus devices..
Has anyone tried the Unicorn Beetle case with the VÜ wireless charging car mount?
I ordered it, really hope it fits... Really nervous!
kmcrane said:
I am new to the nexus 6 and I have a wireless charger I bought for me G2. It came with a wireless pad and cable. It says to use the charger your phone came with.
Well our Nexus 6's come with the super chargers...
Is it OK to use the wireless charger pad with our power chargers? Or should I purchase a 2 amp (or something different) charger to use with the wireless pad?
Just looking for advice. Thank you.
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
You can use an QC 2.0 charger on any phone without issues. The phones/devices PCU (power control unit) controls the output and pulls what it can from be charger. I have 5 or 6 QC 2.0 chargers including 3 Motorola 'turbo' ones and some others. I use these to power my qi pads, charge external batteries, charge my Huawei Watch (formerly charged my LG Urbane) and I've never had any issues at all.
I got my phone today, and one of the first things that I did was test all of the Chargers.
My first thought is that the one plus cable that I bought is very high quality. Every charger that I tested, it charge faster than the cheapo ones that I bought on Amazon.
However, what I've been consistently surprised with is that using the same cable this phone charges faster on a Qualcomm quick charge 2 charger than it does on a standard USB charger. I've tested this with all sorts of Chargers around my house and I'm consistently seeing around 1500 when connected to a quick charger, and only a thousand when connected to a standard charger.
The USB C charger that came with the phone is significantly faster. However I wanted to share this so that for those others who bought all sorts of Qualcomm quick charge 2.0 Chargers, don't throw them out. They're still better than a regular charger.
Yeah on a good USB 3.1 cable (nice and thick) with my standard quickcharge charging block (7 ports, 60W total IIRC) I get 'charging rapidly' and it charges better than 1% a minute - about the same rate my N5 did on a much smaller battery. I've still not taken the google charger out of its box yet.. Need to get around to testing it even if I can't see myself using it.
TonyHoyle said:
Yeah on a good USB 3.1 cable (nice and thick) with my standard quickcharge charging block (7 ports, 60W total IIRC) I get 'charging rapidly' and it charges better than 1% a minute - about the same rate my N5 did on a much smaller battery. I've still not taken the google charger out of its box yet.. Need to get around to testing it even if I can't see myself using it.
Click to expand...
Click to collapse
Care to share said cable and block?
Sent from my Nexus 6 using XDA Free mobile app
I am curious as to what "standard" chargers you are using. I have a wall charger rated at 5v 2.1a (non-QC) per port and a car charger rated at 5v 2.4a (non-QC) per port, and both of those charge at 1500ma. Is it possible that your "standard" chargers are only rated for 5v 1a output?
SymbioticGenius said:
Care to share said cable and block?
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
http://www.amazon.co.uk/gp/product/B010SFDKC6
http://www.amazon.co.uk/gp/product/B00L2SBZ80
My man. Thank you.
Sent from my Nexus 6 using XDA Free mobile app
if possible, please post the charging rates and time taken for charging with:
a) bundled type c fast charger
b) qc 2.0 quickcharger
c) standard 5v/2a charger
thanks!!!
Sent from my A0001 using Tapatalk
Can anyone recommend a car charger with the right cable combination that would give the fastest charging?
NVM... I found one with reviews stating that it rapid charges their 6P.
http://www.amazon.com/gp/product/B0146FK3G0?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
fchowd0696 said:
Can anyone recommend a car charger with the right cable combination that would give the fastest charging?
NVM... I found one with reviews stating that it rapid charges their 6P.
http://www.amazon.com/gp/product/B0146FK3G0?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
Click to expand...
Click to collapse
Bought that one though still waiting on my phone. Like that it has micro USB too for other devices. Charges my HAM2 very fast.
Your results have nothing to do with them being QuickCharge bricks, I have a inline amp meter and I can get 1.5 on any brick with an amp rating high enough, not just my QC bricks that I was using with my Moto X. At least people will know if they have a QC brick they'll get at least that though.
I didn't know this thread existed. I'm getting what I think is pretty poor performance from the stock 6p charger. Please see this post:
http://forum.xda-developers.com/showthread.php?t=3234521
With my Note 22 I used an app called "Galaxy Charging Current". Unfortunately it doesn't work on this phone. With the best charger & cable, the Note 2 showed 1800mA charging. I am looking for an App that would give me similar information with the V10.
Ampere seems to work with the V10:
https://play.google.com/store/apps/details?id=com.gombosdev.ampere
currently using Ampere but getting mixed results
I use GSAM Battery Monitor.
with GSam & 35‰ charged it said the charger was charging @ 196mA. If that were so, then the factory fast charger is defective.
With Ampere & 45% charged it said the charger was charging @ 930mA. If that were so, then the factory fast charger is defective.
My Note 2 charges @ 1800mA and does not know what a fast charger is.
Sent from an AT&T LG V10
I use Battery Monitor Widget Pro. Best I've used so far to monitor battery usage. Haven't actually used it on my V10 but this post just reminded me to install it.
RDI said:
with GSam & 35‰ charged it said the charger was charging @ 196mA. If that were so, then the factory fast charger is defective.
With Ampere & 45% charged it said the charger was charging @ 930mA. If that were so, then the factory fast charger is defective.
My Note 2 charges @ 1800mA and does not know what a fast charger is.
Sent from an AT&T LG V10
Click to expand...
Click to collapse
quick charge 2.0 increases voltage to phone and drops the amps.
so a 5v 2.4a charger will put out around 1800mA (1.8a) on a note 2, the V10 with QC2.0 @ 930mA is prob feeding phone 9-12 volts
istehwin said:
quick charge 2.0 increases voltage to phone and drops the amps.
so a 5v 2.4a charger will put out around 1800mA (1.8a) on a note 2, the V10 with QC2.0 @ 930mA is prob feeding phone 9-12 volts
Click to expand...
Click to collapse
So fast charge capabilities are screwing around with our battery monitoring apps?
Or rather screwing our perception of speed of charge and ma draw?
Ampere.. been using it for years
Sent from my SM-N9200 using XDA Free mobile app
Ampere actually broke my "Estimated time remaining" under battery & storage settings. Just would sit on "calculating... please wait."
Uninstalled it and it's back to working again.
Sent from my LG-H901 using XDA Free mobile app
Techlyfe said:
So fast charge capabilities are screwing around with our battery monitoring apps?
Or rather screwing our perception of speed of charge and ma draw?
Click to expand...
Click to collapse
correct
istehwin said:
correct
Click to expand...
Click to collapse
So to sum up...
930 on a V10 is "the same" as 1800 on a note 2?
I also came from a note 2 and have been confused as heck trying to figure out if my v10 is charging at a decent rate.
I never have a problem with the oem charger but I was on a car trip and using an external battery pack and also tried plugging in to my car stereo but couldn't figure out how to "read" the charging apps.
Sent from my pretty nifty brand new LG V10
lol... I too came from a Note 2
RDI said:
with GSam & 35‰ charged it said the charger was charging @ 196mA. If that were so, then the factory fast charger is defective.
With Ampere & 45% charged it said the charger was charging @ 930mA. If that were so, then the factory fast charger is defective.
My Note 2 charges @ 1800mA and does not know what a fast charger is.
Sent from an AT&T LG V10
Click to expand...
Click to collapse
Take note that the v10 turns off fast charging while screen is on. And ampere is a gesstimate, no app can give you presice. Need to use a USB Doctor sleeve for better results.
Unfortunately Ampere remeassures every time the screen turns on. I used the paid version widget.
Additional note. Fast chargers and fast charging is not the same as Qualcomm Quick Charge 2.0.
A 2.4A charger will not quick charge qc 2.0 LG v10 in this case any faster than an old Iphone cube.
You need a qc (qualcomm) 2.0 compatible quick charger and decent cable. Zerolemon, aukey, tronsmart, Motorola turbo qc 2.0 chargers works great.
The LG v10 is capable of 2400-2850mA. Slightly slower then the Nexus 6, but faster than the G4.
The stock charge that comes with the v10 is qc 2.0 [email protected] or [email protected] max. Some chargers can do 12v, ZeroLemon is one.
Ampere's XDA forum http://forum.xda-developers.com/android/apps-games/app-ampere-charging-meter-t3012890
clockcycle said:
Take note that the v10 turns off fast charging while screen is on. And ampere is a gesstimate, no app can give you presice. Need to use a USB Doctor sleeve for better results.
Unfortunately Ampere remeassures every time the screen turns on. I used the paid version widget.
Additional note. Fast chargers and fast charging is not the same as Qualcomm Quick Charge 2.0.
A 2.4A charger will not quick charge qc 2.0 LG v10 in this case any faster than an old Iphone cube.
You need a qc (qualcomm) 2.0 compatible quick charger and decent cable. Zerolemon, aukey, tronsmart, Motorola turbo qc 2.0 chargers works great.
The LG v10 is capable of 2400-2850mA. Slightly slower then the Nexus 6, but faster than the G4.
The stock charge that comes with the v10 is qc 2.0 [email protected] or [email protected] max. Some chargers can do 12v, ZeroLemon is one.
Click to expand...
Click to collapse
Does it matter what cord is used?
I have the Aukey charging station..wish that power cord was longer
porscheoscar said:
Does it matter what cord is used?
I have the Aukey charging station..wish that power cord was longer
Click to expand...
Click to collapse
Yes in my experience, the quality of the cable makes a difference. I'm not sure if its the actual thickness or connections. I have a 6 foot braided flat cable that doesn't always fast charge on wall charger, but I have a 3 foot flat that does in the car. When I use my better cables it works every time.. I don't know if length makes a difference.
Yes, when I was using my Samsung Note 2 and an app called Galaxy Charging Current you could see the difference in mA. Using an Anker charger and a good cable got it up to 1800mA. It is harder to find longer cables that do not produce a loss. The quality of the conductor (metal /copper) shows up here. I wish that "Galaxy Charging Current" worked on the LG V10.
Sent from an AT&T LG V10
Try ampere... https://play.google.com/store/apps/details?id=com.gombosdev.ampere
Sent from my LG-H901 using Tapatalk
i use this cable by Zikko 1.5m long and max my note 2 with 1800mA. Also the cable works great with LG v10 and support Fast charging. Not only that the quality of the cable is superb. i broke one when my phone fell during charging and it landed on the the bottom first causing the micro usb from cable crooked. beside that the cable is great. http://www.hersheng.com/sites/default/files/1403253142.jpg
Hi, got the Nexus 6. Don't have the Motorola Turbo charger with it and it's not available in my country. Can you please help me in choosing the best quick charger from the ones available in my country? Here are some of the quick chargers that I can buy:
1. Tronsmart TS-WC1Q
2. Aukey PA-U28 Turbo
3. Tronsmart TS-WC3PC Quick Charge 2.0
4. USAMS US Plug Qualcomm Quick Charge 2.0 EPA-466644
5. Pisen Quick Charge 2.0 QC2.0 TS-C057
6. ROCK Quick Charge 2.0
Thanks in advance
yasirrfc said:
Hi, got the Nexus 6. Don't have the Motorola Turbo charger with it and it's not available in my country. Can you please help me in choosing the best quick charger from the ones available in my country? Here are some of the quick chargers that I can buy:
1. Tronsmart TS-WC1Q
2. Aukey PA-U28 Turbo
3. Tronsmart TS-WC3PC Quick Charge 2.0
4. USAMS US Plug Qualcomm Quick Charge 2.0 EPA-466644
5. Pisen Quick Charge 2.0 QC2.0 TS-C057
6. ROCK Quick Charge 2.0
Thanks in advance
Click to expand...
Click to collapse
Check the capacity of the chargers.
The original M-charger has a capacity of 1,6 A at 5V. You can use any charger with at least that capacity.
NLBeev said:
Check the capacity of the chargers.
The original M-charger has a capacity of 1,6 A at 5V. You can use any charger with at least that capacity.
Click to expand...
Click to collapse
Thanks. However, i also wanted to know the experience of existing users with these chargers, including power issues etc. I think I saw somewhere that the micro USB side of a quick charger melted when it was kept on in the power socket?
yasirrfc said:
Thanks. However, i also wanted to know the experience of existing users with these chargers, including power issues etc. I think I saw somewhere that the micro USB side of a quick charger melted when it was kept on in the power socket?
Click to expand...
Click to collapse
Get the Aukey one, it has a really really good review rate at Amazon. It also should come with a cable so you shouldn't be worried about that one.
yasirrfc said:
...wanted to know the experience of existing users with these chargers, including power issues etc.
Click to expand...
Click to collapse
I prefer wireless charging for my N4 and N6.
I am using cheap QI-chargers on several places. The QI-pads can be used with almost any USB charger. Of course wireless charging is slow.
I'm thinking of going with the Tronsmart WC1Q as it is cheap and has good Amazon reviews. I'm not really technical when it comes to chargers. This is the technical info: 5V/2.1A 9V/2A 12V/1.5A. Can anyone confirm if the power details of this charger will be fine with Nexus 6?
yasirrfc said:
I'm thinking of going with the Tronsmart WC1Q as it is cheap and has good Amazon reviews. I'm not really technical when it comes to chargers. This is the technical info: 5V/2.1A 9V/2A 12V/1.5A. Can anyone confirm if the power details of this charger will be fine with Nexus 6?
Click to expand...
Click to collapse
As long as it is Certified by qualcomm you should be fine.
Check this and if its mentioned there you can buy it:
https://www.qualcomm.com/documents/quick-charge-device-list
blanco2701 said:
Get the Aukey one, it has a really really good review rate at Amazon. It also should come with a cable so you shouldn't be worried about that one.
Click to expand...
Click to collapse
I recommend the aukey as well, I used it for my moto x 2nd gen and now my Nexus 6.
I got a Aukey one, and it's really great
In my experience and from others Anker makes good products might want to check into them. And a good charging cable is just as important.
Sent from my Nexus 6 using Tapatalk
I have an Aukey and a Tronsmart. Both work well. Strangely enough, the quality of your USB cable also appears to play a legitimate role in whether Quick Charge2.0 is consistently recognized and used. In other words, high quality charger AND high quality cable is recommended!
just want to ask if there is any correlation between using QC chargers & getting a bloated battery?
yasirrfc said:
I'm thinking of going with the Tronsmart WC1Q as it is cheap and has good Amazon reviews. I'm not really technical when it comes to chargers. This is the technical info: 5V/2.1A 9V/2A 12V/1.5A. Can anyone confirm if the power details of this charger will be fine with Nexus 6?
Click to expand...
Click to collapse
Most important is the 5V/2.1A. This is better than the original Motorola charger I have.
The other values are for Quick charging.
Also better than the original charger.
But I don't know if this Tronsmart is compatible with the quick charging mode of Motorola.
iluvatrix said:
just want to ask if there is any correlation between using QC chargers & getting a bloated battery?
Click to expand...
Click to collapse
Not at all... the phone is made to be compatible with QC. You can even use the QC charger with a phone that doesn't support it, what will happen is that the charger won't activate the QC and just charge at normal speed.
NLBeev said:
Most important is the 5V/2.1A. This is better than the original Motorola charger I have.
The other values are for Quick charging.
Also better than the original charger.
But I don't know if this Tronsmart is compatible with the quick charging mode of Motorola.
Click to expand...
Click to collapse
As long as it is Qualcomm 2.0 Certified it is supposed to work. Motorola's "turbo charge" is just a rebranded Qualcomm 2.0 Quick Charge.
I have just tried the Aukey in your list with my N6 and it did not work as a fast charger even tough the specs of the charger says so. to get the N6 to charge at QC2 you will need a charger with 9V 2A or at least 1.6A to reach approximately 14.4 watt.
many chargers do have the said specs but they won't recognize the N6 as a fast charging phone unfortunately. meanwhile still searching
ROIDjoy said:
I have just tried the Aukey in your list with my N6 and it did not work as a fast charger even tough the specs of the charger says so. to get the N6 to charge at QC2 you will need a charger with 9V 2A or at least 1.6A to reach approximately 14.4 watt.
many chargers do have the said specs but they won't recognize the N6 as a fast charging phone unfortunately. meanwhile still searching
Click to expand...
Click to collapse
My aukey works just fine, been using it for a while now. I even have a aukey portable battery charger with QC 2.0 and it works great as well, especially when I go out and play Pokémon Go
chapelfreak said:
My aukey works just fine, been using it for a while now. I even have a aukey portable battery charger with QC 2.0 and it works great as well, especially when I go out and play Pokémon Go
Click to expand...
Click to collapse
Thanks for your reply then it must be the piece that I have used had some problem
Sent from my HUAWEI NXT-L29 using XDA-Developers mobile app
I use this one and it works perfectly for me. It has an LED that changes color depending on whether it is in normal charging or fast charging mode. Unfortunately, I don't think it is on your list.
Fred
I am getting a kind of a weird experience this end. I use my Huawei quick charger of the mate 8, and it is only recognized by the Motorola Nexus 6 as a fast charger after I reboot the mobile then it starts charging at 9.15 V and 1.36 Amps. it does fast charge at this volt and amps at highs of 2240 mAps on Ampere application !!
I could not figure out another way to get the charger to recognize the Nexus 6 as a fast charging phone except by rebooting, and still working on it. in the meantime I have ordered a Choetech QC 3.0 and waiting for arrival. my question does this happen on your chargers or does it connect directly to 9V when connected to chargers like Aukey, Tronsmart, Anker etc. ??
Guys, is it normal that the phone get heated like an iron box when charging ? ( Well I noted that this happens only if my battery is below 50-60% ) Using Stock charger. Same happens (heating, but temperature is lower than before) even when I use One+ charger.