With my Note 22 I used an app called "Galaxy Charging Current". Unfortunately it doesn't work on this phone. With the best charger & cable, the Note 2 showed 1800mA charging. I am looking for an App that would give me similar information with the V10.
Ampere seems to work with the V10:
https://play.google.com/store/apps/details?id=com.gombosdev.ampere
currently using Ampere but getting mixed results
I use GSAM Battery Monitor.
with GSam & 35‰ charged it said the charger was charging @ 196mA. If that were so, then the factory fast charger is defective.
With Ampere & 45% charged it said the charger was charging @ 930mA. If that were so, then the factory fast charger is defective.
My Note 2 charges @ 1800mA and does not know what a fast charger is.
Sent from an AT&T LG V10
I use Battery Monitor Widget Pro. Best I've used so far to monitor battery usage. Haven't actually used it on my V10 but this post just reminded me to install it.
RDI said:
with GSam & 35‰ charged it said the charger was charging @ 196mA. If that were so, then the factory fast charger is defective.
With Ampere & 45% charged it said the charger was charging @ 930mA. If that were so, then the factory fast charger is defective.
My Note 2 charges @ 1800mA and does not know what a fast charger is.
Sent from an AT&T LG V10
Click to expand...
Click to collapse
quick charge 2.0 increases voltage to phone and drops the amps.
so a 5v 2.4a charger will put out around 1800mA (1.8a) on a note 2, the V10 with QC2.0 @ 930mA is prob feeding phone 9-12 volts
istehwin said:
quick charge 2.0 increases voltage to phone and drops the amps.
so a 5v 2.4a charger will put out around 1800mA (1.8a) on a note 2, the V10 with QC2.0 @ 930mA is prob feeding phone 9-12 volts
Click to expand...
Click to collapse
So fast charge capabilities are screwing around with our battery monitoring apps?
Or rather screwing our perception of speed of charge and ma draw?
Ampere.. been using it for years
Sent from my SM-N9200 using XDA Free mobile app
Ampere actually broke my "Estimated time remaining" under battery & storage settings. Just would sit on "calculating... please wait."
Uninstalled it and it's back to working again.
Sent from my LG-H901 using XDA Free mobile app
Techlyfe said:
So fast charge capabilities are screwing around with our battery monitoring apps?
Or rather screwing our perception of speed of charge and ma draw?
Click to expand...
Click to collapse
correct
istehwin said:
correct
Click to expand...
Click to collapse
So to sum up...
930 on a V10 is "the same" as 1800 on a note 2?
I also came from a note 2 and have been confused as heck trying to figure out if my v10 is charging at a decent rate.
I never have a problem with the oem charger but I was on a car trip and using an external battery pack and also tried plugging in to my car stereo but couldn't figure out how to "read" the charging apps.
Sent from my pretty nifty brand new LG V10
lol... I too came from a Note 2
RDI said:
with GSam & 35‰ charged it said the charger was charging @ 196mA. If that were so, then the factory fast charger is defective.
With Ampere & 45% charged it said the charger was charging @ 930mA. If that were so, then the factory fast charger is defective.
My Note 2 charges @ 1800mA and does not know what a fast charger is.
Sent from an AT&T LG V10
Click to expand...
Click to collapse
Take note that the v10 turns off fast charging while screen is on. And ampere is a gesstimate, no app can give you presice. Need to use a USB Doctor sleeve for better results.
Unfortunately Ampere remeassures every time the screen turns on. I used the paid version widget.
Additional note. Fast chargers and fast charging is not the same as Qualcomm Quick Charge 2.0.
A 2.4A charger will not quick charge qc 2.0 LG v10 in this case any faster than an old Iphone cube.
You need a qc (qualcomm) 2.0 compatible quick charger and decent cable. Zerolemon, aukey, tronsmart, Motorola turbo qc 2.0 chargers works great.
The LG v10 is capable of 2400-2850mA. Slightly slower then the Nexus 6, but faster than the G4.
The stock charge that comes with the v10 is qc 2.0 [email protected] or [email protected] max. Some chargers can do 12v, ZeroLemon is one.
Ampere's XDA forum http://forum.xda-developers.com/android/apps-games/app-ampere-charging-meter-t3012890
clockcycle said:
Take note that the v10 turns off fast charging while screen is on. And ampere is a gesstimate, no app can give you presice. Need to use a USB Doctor sleeve for better results.
Unfortunately Ampere remeassures every time the screen turns on. I used the paid version widget.
Additional note. Fast chargers and fast charging is not the same as Qualcomm Quick Charge 2.0.
A 2.4A charger will not quick charge qc 2.0 LG v10 in this case any faster than an old Iphone cube.
You need a qc (qualcomm) 2.0 compatible quick charger and decent cable. Zerolemon, aukey, tronsmart, Motorola turbo qc 2.0 chargers works great.
The LG v10 is capable of 2400-2850mA. Slightly slower then the Nexus 6, but faster than the G4.
The stock charge that comes with the v10 is qc 2.0 [email protected] or [email protected] max. Some chargers can do 12v, ZeroLemon is one.
Click to expand...
Click to collapse
Does it matter what cord is used?
I have the Aukey charging station..wish that power cord was longer
porscheoscar said:
Does it matter what cord is used?
I have the Aukey charging station..wish that power cord was longer
Click to expand...
Click to collapse
Yes in my experience, the quality of the cable makes a difference. I'm not sure if its the actual thickness or connections. I have a 6 foot braided flat cable that doesn't always fast charge on wall charger, but I have a 3 foot flat that does in the car. When I use my better cables it works every time.. I don't know if length makes a difference.
Yes, when I was using my Samsung Note 2 and an app called Galaxy Charging Current you could see the difference in mA. Using an Anker charger and a good cable got it up to 1800mA. It is harder to find longer cables that do not produce a loss. The quality of the conductor (metal /copper) shows up here. I wish that "Galaxy Charging Current" worked on the LG V10.
Sent from an AT&T LG V10
Try ampere... https://play.google.com/store/apps/details?id=com.gombosdev.ampere
Sent from my LG-H901 using Tapatalk
i use this cable by Zikko 1.5m long and max my note 2 with 1800mA. Also the cable works great with LG v10 and support Fast charging. Not only that the quality of the cable is superb. i broke one when my phone fell during charging and it landed on the the bottom first causing the micro usb from cable crooked. beside that the cable is great. http://www.hersheng.com/sites/default/files/1403253142.jpg
Related
I got my phone today, and one of the first things that I did was test all of the Chargers.
My first thought is that the one plus cable that I bought is very high quality. Every charger that I tested, it charge faster than the cheapo ones that I bought on Amazon.
However, what I've been consistently surprised with is that using the same cable this phone charges faster on a Qualcomm quick charge 2 charger than it does on a standard USB charger. I've tested this with all sorts of Chargers around my house and I'm consistently seeing around 1500 when connected to a quick charger, and only a thousand when connected to a standard charger.
The USB C charger that came with the phone is significantly faster. However I wanted to share this so that for those others who bought all sorts of Qualcomm quick charge 2.0 Chargers, don't throw them out. They're still better than a regular charger.
Yeah on a good USB 3.1 cable (nice and thick) with my standard quickcharge charging block (7 ports, 60W total IIRC) I get 'charging rapidly' and it charges better than 1% a minute - about the same rate my N5 did on a much smaller battery. I've still not taken the google charger out of its box yet.. Need to get around to testing it even if I can't see myself using it.
TonyHoyle said:
Yeah on a good USB 3.1 cable (nice and thick) with my standard quickcharge charging block (7 ports, 60W total IIRC) I get 'charging rapidly' and it charges better than 1% a minute - about the same rate my N5 did on a much smaller battery. I've still not taken the google charger out of its box yet.. Need to get around to testing it even if I can't see myself using it.
Click to expand...
Click to collapse
Care to share said cable and block?
Sent from my Nexus 6 using XDA Free mobile app
I am curious as to what "standard" chargers you are using. I have a wall charger rated at 5v 2.1a (non-QC) per port and a car charger rated at 5v 2.4a (non-QC) per port, and both of those charge at 1500ma. Is it possible that your "standard" chargers are only rated for 5v 1a output?
SymbioticGenius said:
Care to share said cable and block?
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
http://www.amazon.co.uk/gp/product/B010SFDKC6
http://www.amazon.co.uk/gp/product/B00L2SBZ80
My man. Thank you.
Sent from my Nexus 6 using XDA Free mobile app
if possible, please post the charging rates and time taken for charging with:
a) bundled type c fast charger
b) qc 2.0 quickcharger
c) standard 5v/2a charger
thanks!!!
Sent from my A0001 using Tapatalk
Can anyone recommend a car charger with the right cable combination that would give the fastest charging?
NVM... I found one with reviews stating that it rapid charges their 6P.
http://www.amazon.com/gp/product/B0146FK3G0?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
fchowd0696 said:
Can anyone recommend a car charger with the right cable combination that would give the fastest charging?
NVM... I found one with reviews stating that it rapid charges their 6P.
http://www.amazon.com/gp/product/B0146FK3G0?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
Click to expand...
Click to collapse
Bought that one though still waiting on my phone. Like that it has micro USB too for other devices. Charges my HAM2 very fast.
Your results have nothing to do with them being QuickCharge bricks, I have a inline amp meter and I can get 1.5 on any brick with an amp rating high enough, not just my QC bricks that I was using with my Moto X. At least people will know if they have a QC brick they'll get at least that though.
I didn't know this thread existed. I'm getting what I think is pretty poor performance from the stock 6p charger. Please see this post:
http://forum.xda-developers.com/showthread.php?t=3234521
According the specification out V10 supports Quick Charge 2.0.
Does this mean any charge that support Quick Charge 2.0 should work? or it more hit or miss?
I purchased this http://www.amazon.com/gp/product/B0144S0PDK
and when I connect it I don't see it indicating quick charge.
thanks
This one is tricky. Regular high-amp (2.1A) chargers don't seem to do the trick; its more about amps AND volts on this phone. The only other charger I've gotten 'fast charging' to work with is the Motorola Turbocharger I got with my Nexus 6. I suppose if you found a charger that outputs the same amperage and voltage as the LG charger it would work, in theory.
The charger that came with mine is a fast charge charger. It shows fast charge when I plug it in.
The charger that comes with does indicate quick charging when I plug it in to it.
But the car charger that I purchased that claims quick charging support does not indicate quick charging when I plug it in.
Was looking for others experience to decide if I should return and complain.
Unless the chargers say that they are Quick Charge 2.0 or 3.0 they don't quick charge our phones. AC or Cigarette lighter charger. Now, there is at least one brand of charger out there that @ 5 volts DC used to charge my Note 2 at 1800mA, but it was smart not quick.
Sent from an AT&T LG V10
It does..i bought a quick charger for my htc one m9 before and it shows the fast charging when i tether the v10 to it
The phone will detect if it will quick charge when connected to a QC 2.0, you don't get a QC when you plug it in instantly, it will also depend on how much power you already have in the phone.
Aukey is a authorized with QC 2.0 and is listed in Qualcomm site.
I've got the power..
stevenlong said:
According the specification out V10 supports Quick Charge 2.0.
Does this mean any charge that support Quick Charge 2.0 should work? or it more hit or miss?
I purchased this http://www.amazon.com/gp/product/B0144S0PDK
and when I connect it I don't see it indicating quick charge.
thanks
Click to expand...
Click to collapse
thedrizzle said:
This one is tricky. Regular high-amp (2.1A) chargers don't seem to do the trick; its more about amps AND volts on this phone. The only other charger I've gotten 'fast charging' to work with is the Motorola Turbocharger I got with my Nexus 6. I suppose if you found a charger that outputs the same amperage and voltage as the LG charger it would work, in theory.
Click to expand...
Click to collapse
RDI said:
Unless the chargers say that they are Quick Charge 2.0 or 3.0 they don't quick charge our phones. AC or Cigarette lighter charger. Now, there is at least one brand of charger out there that @ 5 volts DC used to charge my Note 2 at 1800mA, but it was smart not quick.
Sent from an AT&T LG V10
Click to expand...
Click to collapse
What RDI said.
"Quick Charge" is not "Fast Charge" or "Adaptive Charge" - All of my 2.4amp Fast Chargers do not charge the G4 or v10 any faster than an old iphone power cube. YMMV
The V10 is Quick Charge qc (Qualcomm) 2.0.
There are already a couple of threads on the subject. here and here
@ZEROLEMON_OFFICIAL makes one of the best IMHO. Anker, Aukey/Tronsmart, and Motorola Turbo Chargers have qc 2.0 compatible ones. (always a sale on groupon or slickdeals)
Our phone, like the LG G4 switches to Quick Charge when the main screen is off. And tones it down to standard charging speed if you have the main screen on. The v10 Quick Charges at about 2850mA, slightly faster than the G4 at 2000~2200mA, but slower than the Nexus 6 at 2700~3200mA.
Attached are results by CoNsPiRiSiZe on this AT&T variant, and mine on Tmobile variant. Also included is my USB Doctor Sleeve using a Motorola Turbo Charger plugged into the v10 with screen off.
I am using the Samsung adaptive car charger while driving and it shows fast charging on the lockscreen
Sent from my LG-H961N using Tapatalk
Turns out I had a bad aukey charger, I bought another for my wife and it works fine, show quick charge.
Returning the bad one and getting another.
@clockcycle how are you able to measure current using ampere with display turned off?
BurtGummer said:
@clockcycle how are you able to measure current using ampere with display turned off?
Click to expand...
Click to collapse
I have paid version with notificaion ebabled. But you can run it, leave phone alone so it can meassure. Then turn on screen and screenshot results. It takes a few seconds before it drops or remeassures.
Do these really charge all that much faster than a 2.1a charger? Debating if it's worth it to go invest into a few of these QC chargers.
Thanks
adambean said:
Do these really charge all that much faster than a 2.1a charger? Debating if it's worth it to go invest into a few of these QC chargers.
Thanks
Click to expand...
Click to collapse
QC 2.0 allows up to a maximum of 3A of current. Every QC 2.0 enabled device will vary slightly in how much power they can draw due to internal circuitry. The V10 charges at about 2.85A as shown by Clockcyle so yes, a QC 2.0 charger will charge faster than a standard 2.1A charger.
Excellent, thank you! Going to pick up some of them now then.
Using the app Ampere, my V10 does not take advantage of the fast charge 2.0. I get to charging at or around 700mA, but mostly sub 500mA or less. I've tried using the charger that came with the phone, I purchased an Anker 40W 5-Port charger and recently a Mobiilink 6-Port 60W charger all with the same results. Any ideas as to what may be wrong (if any). My phone has been charging for the last 3hrs and is only at 50% after being plugged in at 9%. Thanks in advance for any help.
dkool1 said:
Using the app Ampere, my V10 does not take advantage of the fast charge 2.0. I get to charging at or around 700mA, but mostly sub 500mA or less. I've tried using the charger that came with the phone, I purchased an Anker 40W 5-Port charger and recently a Mobiilink 6-Port 60W charger all with the same results. Any ideas as to what may be wrong (if any). My phone has been charging for the last 3hrs and is only at 50% after being plugged in at 9%. Thanks in advance for any help.
Click to expand...
Click to collapse
As far as I can determine, neither of the chargers you mention are Qualcomm Quick charge certified. So you won't be able to get the fastest charge with them. Anker does make chargers that are qualcomm certified, but the one you have isn't. Mobilink has zero devices that are certified.
No matter what words are used by the manufacturer, unless they are qualcomm certified you are more than likely out of luck..
What about the charger that came with the phone? It is certified and will most definiitely give you a fast charge.
The V10 is equiped with qualcomm fast charge 2.0 technology. Fast charge 3.0 is available on a few devices and there are lots of manufacturers advertising chargers that are quallcomm fast charge 3.0 certified. I personally would avoid these as they won't speed up the charge rate of the V10 and are usually sold at a premium price.
Thanks for the reply. The phone DOES quick charge. It seems that when I'm using the phone while charging, it charges slowly (>500mA) . When I set it down, it will charge fast (<1.5A). The charger that came with the phone is Qualcomm fast charge 2.0 as well as the 5-port Mobiilink (only one port).
To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the LG G6 can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!
I have used the charger that came with it (since it was the only USB-C cable I had at the time) and it charged amazingly fast. I bought a Wireless charger as well which is also amazingly fast. It's my first wireless charging experience and I was told it trickle charges so it would be much slower than charging from the cable, but I barely notice a difference in speed at all. I keep checking the phone what seems like every couple of minutes if not seconds and the % has increased by a lot more than I would have imagined. I thought wireless charging to be pointless and a who-cares ordeal, but not that I have experienced it... I don't think I will go back to a device without it (not for a phone at least). I'm not sure if any health issues can be there from radiation, but I'm almost dead anyway (well... I have about 50 years to go I guess) so I don't really care, lol.
For those wondering, I went with the CHOETECH Qi Model T513 wireless charger. Input: DC5V/2A (Max) Output: 7.5W which I purchased from Amazon for only $19.95. That was 50% off at the time I purchased it, but that was only a few days ago so you might want to check on it.
Really? I feel my g6 charges way slower then my S7 edge. I still have it but I'm gonna test this tomorrow.
---------- Post added at 09:45 AM ---------- Previous post was at 09:45 AM ----------
chinchillables said:
I have used the charger that came with it (since it was the only USB-C cable I had at the time) and it charged amazingly fast. I bought a Wireless charger as well which is also amazingly fast. It's my first wireless charging experience and I was told it trickle charges so it would be much slower than charging from the cable, but I barely notice a difference in speed at all. I keep checking the phone what seems like every couple of minutes if not seconds and the % has increased by a lot more than I would have imagined. I thought wireless charging to be pointless and a who-cares ordeal, but not that I have experienced it... I don't think I will go back to a device without it (not for a phone at least). I'm not sure if any health issues can be there from radiation, but I'm almost dead anyway (well... I have about 50 years to go I guess) so I don't really care, lol.
For those wondering, I went with the CHOETECH Qi Model T513 wireless charger. Input: DC5V/2A (Max) Output: 7.5W which I purchased from Amazon for only $19.95. That was 50% off at the time I purchased it, but that was only a few days ago so you might want to check on it.
Click to expand...
Click to collapse
Really? I feel my g6 charges way slower then my S7 edge. I still have it but I'm gonna test this tomorrow.
Went and picked up this bad boy today. LS variant. Out of the box, had 41%. Using my car charger Qualcomm Quick Charge 2.0(yes 2.0) and the included USB C, it charged to 70% in the 20 minute drive back to my house. For using the old QC tech, still charged amazingly fast. I have a QC3.0 39W wall charger that got delivered this afternoon. Will wait til this baby dies and charge her up with that and will report back.
Ive noticed when using a QC 3.0 charger and cable doesnt seem like the g6 is actually charging faster. Its suppose to support QC but its not.
I'm finding this charges a lot slower than my S7 Edge as well. Using the provided cable and charger it takes about 2.5 hours to go from 5% to full which is generally fine, but there isn't a burst and then trickle. I appreciated being able to plug my phone in for a short time when it was low and top it up enough to go out and not worry about it dying. Can't really do that with this one.
I had a power brick laying around and says qualcomm 2.0 and it charge`s really fast, like 1% of battery every min. , but yes with the stock charger brick takes forever to charge.
Using a Xiaomi USB C charger (45W) which supports both UPD 2.0 and QC 3.0, my phone charged very fast.
Mine charges super fast with the supplied charger. I plugged in with 11% yesterday and hit 50% in like 25 minutes.
quick charging is convenient and all, but is there a way to revert to normal charging? I don't want to accelerate my cycles. Thanks.
Sent from my LG-H870DS using Tapatalk
tagacapiz said:
quick charging is convenient and all, but is there a way to revert to normal charging? I don't want to accelerate my cycles. Thanks.
Sent from my LG-H870DS using Tapatalk
Click to expand...
Click to collapse
Use a non-QC charger.
thanks. I'll do that, I have to get extra cables anyway. Although I was wondering if there was a way to hack it phone-wise.
Sent from my LG-H870DS using Tapatalk
sharoon01 said:
I'm finding this charges a lot slower than my S7 Edge as well. Using the provided cable and charger it takes about 2.5 hours to go from 5% to full which is generally fine, but there isn't a burst and then trickle. I appreciated being able to plug my phone in for a short time when it was low and top it up enough to go out and not worry about it dying. Can't really do that with this one.
Click to expand...
Click to collapse
the charger that comes with the device doesn't support QC3, it's a QC2 charger.
so, getting a QC3 charger would defiantly decrease the charging time :good:
abdullahziad said:
the charger that comes with the device doesn't support QC3, it's a QC2 charger.
so, getting a QC3 charger would defiantly decrease the charging time :good:
Click to expand...
Click to collapse
I'm pretty sure the supplies charger is QC3.
vintagerock said:
I'm pretty sure the supplies charger is QC3.
Click to expand...
Click to collapse
Silly question - is there an easy way to tell if a charger is QC2 or QC3?
sharoon01 said:
Silly question - is there an easy way to tell if a charger is QC2 or QC3?
Click to expand...
Click to collapse
Look to the charger specification, if it supports only 5v and 9v then is QC2. QC3 scales on various voltage between 5 and 12 volts.
And yes, the provided charger is QC2, probably the same Found with the G5.
Yeah I take back what I said. The supplied charger does appear to "only" be QC 3. It still seems faster then QC2 though. Maybe it's just in my head. It works for my needs though, I can get almost 50% in like 20.
Charge in airplane mode when you can. When you have no worries of anyone calling or texting. With wifi off as well you'll see a decent jump in fast charging.
purchased by phone a couple of days back and it charged from 5% to 100% in approx 1.40 mins with the stock QC 2.0. I'm damn impressed....
Let me Ask y'all something. Coming from a LG G4 and just Charging My Batteries by a OEM Battery Charger I got 2HRs More of SOT. When I charge via the USB Quick Charger I got the same 3HRs as usual. So I got 5 while charging Slower then the SO-Called Quick Charging. To my understanding Batteries are meant to Slow-Charge rather then Fast
To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the Essential Phone can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!
They claim that a 5 mins charge gets you 5 hours of battery. 1 hour and 30 minutes for a complete charge.
Sent from my Pixel using XDA-Developers Legacy app
Apperently its like 30 something Watts. Unbox Therapy found this on the charger.
27W to be exact. And on another video review, it showed 5v @ 3A and 9v @ 3A on the charger. So this thing should charge pretty quick and I assume is just using the native USB-C Fast Charge capability which is just fine.
I got confirmation from support that it is using USB-C PD for charging. No QuickCharge.
So this is all false then...
http://www.theandroidsoul.com/essential-phone-fast-charging/
LastQuark said:
So this is all false then...
http://www.theandroidsoul.com/essential-phone-fast-charging/
Click to expand...
Click to collapse
Yup, that would be a lie. Just because you have a 835, they would have to still implement QC themselves in order to leverage it.
And I believe Qualcomm loves to charge a pretty penny to flip that bit on for your device.
The device may still charge pretty quickly, but we will need some reports from those who have it in hand.
Anyone with it already have AccuBattery installed and see what the charging speed is plugged into its charger?
uncled1023 said:
I got confirmation from support that it is using USB-C PD for charging. No QuickCharge.
Click to expand...
Click to collapse
From a review I watched, they said that the charger is capable of Charing 5 hours of usage time in 5 minutes.
I tried my s8 charger on it, the charger quickly heated up and stopped charging the device
When using the S8 charger, it show slow charging... Sucks
Soooo... What's wrong with using the included charger?
And Samsung uses some other form of Fast Charging that's proprietary to their own devices. It isn't Qualcomm quick charge at least at the generic level. Essential just uses the USB-C 3A fast charge ability which you will have to get separate from both Samsung or QC2/3.0 stuff which is a bit of a pain, but really not surprising. Same as the Nexus/Pixel devices.
It shows Charging Slowly with my Anker PowerPort 10 charger for some reason - even though it is 60W capable and nothing else was plugged into it. I'm really hoping I don't actually have to use the bundled charger just to get it to charge quickly. That would actually be really annoying. I rarely use included chargers since I have Anker PowerPorts everywhere that I need to charge.
I plugged in an Ailey quick charge charger. It first said charging slowly then changed to charging rapidly.
Sent from my PH-1 using Tapatalk
ack154 said:
It shows Charging Slowly with my Anker PowerPort 10 charger for some reason - even though it is 60W capable and nothing else was plugged into it. I'm really hoping I don't actually have to use the bundled charger just to get it to charge quickly. That would actually be really annoying. I rarely use included chargers since I have Anker PowerPorts everywhere that I need to charge.
Click to expand...
Click to collapse
That's because it will never fast charge a USB-C Fast Charge device. You need something like this since this device does not have Qualcomm quick charge.
That 60W charger doesn't really support any modern Quick Charge, it just supports the max 2.4A charging for things like Tablets and whatnot.
For those using Quick Charge to the PH-1, it is only compatible with QC 4.0 and not QC 3.0 or below. QC 4.0 is compatible with Power Delivery (PD) that PH-1 uses.
27W USB Charger
Just got mine today... It says 27W...
LazerL0rd said:
Apperently its like 30 something Watts. Unbox Therapy found this on the charger.
Click to expand...
Click to collapse
Franksr said:
Just got mine today... It says 27W...
Click to expand...
Click to collapse
Yeah.. that should be average.
IM0001 said:
That's because it will never fast charge a USB-C Fast Charge device. You need something like this since this device does not have Qualcomm quick charge.
That 60W charger doesn't really support any modern Quick Charge, it just supports the max 2.4A charging for things like Tablets and whatnot.
Click to expand...
Click to collapse
Quick charge or no quick charge, I'm pretty sure it's supposed to charge faster than 3% overnight. It still said charging slowly when I got up this morning and said 5 days until full. It had actually only gone up 3% in the past 9 hours.
My battery is at 96% so it may not be the most accurate test, and it was over 1000mah on initial plug in and then slowly went down to what's on the screen shot after about a minute.