According the specification out V10 supports Quick Charge 2.0.
Does this mean any charge that support Quick Charge 2.0 should work? or it more hit or miss?
I purchased this http://www.amazon.com/gp/product/B0144S0PDK
and when I connect it I don't see it indicating quick charge.
thanks
This one is tricky. Regular high-amp (2.1A) chargers don't seem to do the trick; its more about amps AND volts on this phone. The only other charger I've gotten 'fast charging' to work with is the Motorola Turbocharger I got with my Nexus 6. I suppose if you found a charger that outputs the same amperage and voltage as the LG charger it would work, in theory.
The charger that came with mine is a fast charge charger. It shows fast charge when I plug it in.
The charger that comes with does indicate quick charging when I plug it in to it.
But the car charger that I purchased that claims quick charging support does not indicate quick charging when I plug it in.
Was looking for others experience to decide if I should return and complain.
Unless the chargers say that they are Quick Charge 2.0 or 3.0 they don't quick charge our phones. AC or Cigarette lighter charger. Now, there is at least one brand of charger out there that @ 5 volts DC used to charge my Note 2 at 1800mA, but it was smart not quick.
Sent from an AT&T LG V10
It does..i bought a quick charger for my htc one m9 before and it shows the fast charging when i tether the v10 to it
The phone will detect if it will quick charge when connected to a QC 2.0, you don't get a QC when you plug it in instantly, it will also depend on how much power you already have in the phone.
Aukey is a authorized with QC 2.0 and is listed in Qualcomm site.
I've got the power..
stevenlong said:
According the specification out V10 supports Quick Charge 2.0.
Does this mean any charge that support Quick Charge 2.0 should work? or it more hit or miss?
I purchased this http://www.amazon.com/gp/product/B0144S0PDK
and when I connect it I don't see it indicating quick charge.
thanks
Click to expand...
Click to collapse
thedrizzle said:
This one is tricky. Regular high-amp (2.1A) chargers don't seem to do the trick; its more about amps AND volts on this phone. The only other charger I've gotten 'fast charging' to work with is the Motorola Turbocharger I got with my Nexus 6. I suppose if you found a charger that outputs the same amperage and voltage as the LG charger it would work, in theory.
Click to expand...
Click to collapse
RDI said:
Unless the chargers say that they are Quick Charge 2.0 or 3.0 they don't quick charge our phones. AC or Cigarette lighter charger. Now, there is at least one brand of charger out there that @ 5 volts DC used to charge my Note 2 at 1800mA, but it was smart not quick.
Sent from an AT&T LG V10
Click to expand...
Click to collapse
What RDI said.
"Quick Charge" is not "Fast Charge" or "Adaptive Charge" - All of my 2.4amp Fast Chargers do not charge the G4 or v10 any faster than an old iphone power cube. YMMV
The V10 is Quick Charge qc (Qualcomm) 2.0.
There are already a couple of threads on the subject. here and here
@ZEROLEMON_OFFICIAL makes one of the best IMHO. Anker, Aukey/Tronsmart, and Motorola Turbo Chargers have qc 2.0 compatible ones. (always a sale on groupon or slickdeals)
Our phone, like the LG G4 switches to Quick Charge when the main screen is off. And tones it down to standard charging speed if you have the main screen on. The v10 Quick Charges at about 2850mA, slightly faster than the G4 at 2000~2200mA, but slower than the Nexus 6 at 2700~3200mA.
Attached are results by CoNsPiRiSiZe on this AT&T variant, and mine on Tmobile variant. Also included is my USB Doctor Sleeve using a Motorola Turbo Charger plugged into the v10 with screen off.
I am using the Samsung adaptive car charger while driving and it shows fast charging on the lockscreen
Sent from my LG-H961N using Tapatalk
Turns out I had a bad aukey charger, I bought another for my wife and it works fine, show quick charge.
Returning the bad one and getting another.
@clockcycle how are you able to measure current using ampere with display turned off?
BurtGummer said:
@clockcycle how are you able to measure current using ampere with display turned off?
Click to expand...
Click to collapse
I have paid version with notificaion ebabled. But you can run it, leave phone alone so it can meassure. Then turn on screen and screenshot results. It takes a few seconds before it drops or remeassures.
Do these really charge all that much faster than a 2.1a charger? Debating if it's worth it to go invest into a few of these QC chargers.
Thanks
adambean said:
Do these really charge all that much faster than a 2.1a charger? Debating if it's worth it to go invest into a few of these QC chargers.
Thanks
Click to expand...
Click to collapse
QC 2.0 allows up to a maximum of 3A of current. Every QC 2.0 enabled device will vary slightly in how much power they can draw due to internal circuitry. The V10 charges at about 2.85A as shown by Clockcyle so yes, a QC 2.0 charger will charge faster than a standard 2.1A charger.
Excellent, thank you! Going to pick up some of them now then.
Related
With my Note 22 I used an app called "Galaxy Charging Current". Unfortunately it doesn't work on this phone. With the best charger & cable, the Note 2 showed 1800mA charging. I am looking for an App that would give me similar information with the V10.
Ampere seems to work with the V10:
https://play.google.com/store/apps/details?id=com.gombosdev.ampere
currently using Ampere but getting mixed results
I use GSAM Battery Monitor.
with GSam & 35‰ charged it said the charger was charging @ 196mA. If that were so, then the factory fast charger is defective.
With Ampere & 45% charged it said the charger was charging @ 930mA. If that were so, then the factory fast charger is defective.
My Note 2 charges @ 1800mA and does not know what a fast charger is.
Sent from an AT&T LG V10
I use Battery Monitor Widget Pro. Best I've used so far to monitor battery usage. Haven't actually used it on my V10 but this post just reminded me to install it.
RDI said:
with GSam & 35‰ charged it said the charger was charging @ 196mA. If that were so, then the factory fast charger is defective.
With Ampere & 45% charged it said the charger was charging @ 930mA. If that were so, then the factory fast charger is defective.
My Note 2 charges @ 1800mA and does not know what a fast charger is.
Sent from an AT&T LG V10
Click to expand...
Click to collapse
quick charge 2.0 increases voltage to phone and drops the amps.
so a 5v 2.4a charger will put out around 1800mA (1.8a) on a note 2, the V10 with QC2.0 @ 930mA is prob feeding phone 9-12 volts
istehwin said:
quick charge 2.0 increases voltage to phone and drops the amps.
so a 5v 2.4a charger will put out around 1800mA (1.8a) on a note 2, the V10 with QC2.0 @ 930mA is prob feeding phone 9-12 volts
Click to expand...
Click to collapse
So fast charge capabilities are screwing around with our battery monitoring apps?
Or rather screwing our perception of speed of charge and ma draw?
Ampere.. been using it for years
Sent from my SM-N9200 using XDA Free mobile app
Ampere actually broke my "Estimated time remaining" under battery & storage settings. Just would sit on "calculating... please wait."
Uninstalled it and it's back to working again.
Sent from my LG-H901 using XDA Free mobile app
Techlyfe said:
So fast charge capabilities are screwing around with our battery monitoring apps?
Or rather screwing our perception of speed of charge and ma draw?
Click to expand...
Click to collapse
correct
istehwin said:
correct
Click to expand...
Click to collapse
So to sum up...
930 on a V10 is "the same" as 1800 on a note 2?
I also came from a note 2 and have been confused as heck trying to figure out if my v10 is charging at a decent rate.
I never have a problem with the oem charger but I was on a car trip and using an external battery pack and also tried plugging in to my car stereo but couldn't figure out how to "read" the charging apps.
Sent from my pretty nifty brand new LG V10
lol... I too came from a Note 2
RDI said:
with GSam & 35‰ charged it said the charger was charging @ 196mA. If that were so, then the factory fast charger is defective.
With Ampere & 45% charged it said the charger was charging @ 930mA. If that were so, then the factory fast charger is defective.
My Note 2 charges @ 1800mA and does not know what a fast charger is.
Sent from an AT&T LG V10
Click to expand...
Click to collapse
Take note that the v10 turns off fast charging while screen is on. And ampere is a gesstimate, no app can give you presice. Need to use a USB Doctor sleeve for better results.
Unfortunately Ampere remeassures every time the screen turns on. I used the paid version widget.
Additional note. Fast chargers and fast charging is not the same as Qualcomm Quick Charge 2.0.
A 2.4A charger will not quick charge qc 2.0 LG v10 in this case any faster than an old Iphone cube.
You need a qc (qualcomm) 2.0 compatible quick charger and decent cable. Zerolemon, aukey, tronsmart, Motorola turbo qc 2.0 chargers works great.
The LG v10 is capable of 2400-2850mA. Slightly slower then the Nexus 6, but faster than the G4.
The stock charge that comes with the v10 is qc 2.0 [email protected] or [email protected] max. Some chargers can do 12v, ZeroLemon is one.
Ampere's XDA forum http://forum.xda-developers.com/android/apps-games/app-ampere-charging-meter-t3012890
clockcycle said:
Take note that the v10 turns off fast charging while screen is on. And ampere is a gesstimate, no app can give you presice. Need to use a USB Doctor sleeve for better results.
Unfortunately Ampere remeassures every time the screen turns on. I used the paid version widget.
Additional note. Fast chargers and fast charging is not the same as Qualcomm Quick Charge 2.0.
A 2.4A charger will not quick charge qc 2.0 LG v10 in this case any faster than an old Iphone cube.
You need a qc (qualcomm) 2.0 compatible quick charger and decent cable. Zerolemon, aukey, tronsmart, Motorola turbo qc 2.0 chargers works great.
The LG v10 is capable of 2400-2850mA. Slightly slower then the Nexus 6, but faster than the G4.
The stock charge that comes with the v10 is qc 2.0 [email protected] or [email protected] max. Some chargers can do 12v, ZeroLemon is one.
Click to expand...
Click to collapse
Does it matter what cord is used?
I have the Aukey charging station..wish that power cord was longer
porscheoscar said:
Does it matter what cord is used?
I have the Aukey charging station..wish that power cord was longer
Click to expand...
Click to collapse
Yes in my experience, the quality of the cable makes a difference. I'm not sure if its the actual thickness or connections. I have a 6 foot braided flat cable that doesn't always fast charge on wall charger, but I have a 3 foot flat that does in the car. When I use my better cables it works every time.. I don't know if length makes a difference.
Yes, when I was using my Samsung Note 2 and an app called Galaxy Charging Current you could see the difference in mA. Using an Anker charger and a good cable got it up to 1800mA. It is harder to find longer cables that do not produce a loss. The quality of the conductor (metal /copper) shows up here. I wish that "Galaxy Charging Current" worked on the LG V10.
Sent from an AT&T LG V10
Try ampere... https://play.google.com/store/apps/details?id=com.gombosdev.ampere
Sent from my LG-H901 using Tapatalk
i use this cable by Zikko 1.5m long and max my note 2 with 1800mA. Also the cable works great with LG v10 and support Fast charging. Not only that the quality of the cable is superb. i broke one when my phone fell during charging and it landed on the the bottom first causing the micro usb from cable crooked. beside that the cable is great. http://www.hersheng.com/sites/default/files/1403253142.jpg
Using the app Ampere, my V10 does not take advantage of the fast charge 2.0. I get to charging at or around 700mA, but mostly sub 500mA or less. I've tried using the charger that came with the phone, I purchased an Anker 40W 5-Port charger and recently a Mobiilink 6-Port 60W charger all with the same results. Any ideas as to what may be wrong (if any). My phone has been charging for the last 3hrs and is only at 50% after being plugged in at 9%. Thanks in advance for any help.
dkool1 said:
Using the app Ampere, my V10 does not take advantage of the fast charge 2.0. I get to charging at or around 700mA, but mostly sub 500mA or less. I've tried using the charger that came with the phone, I purchased an Anker 40W 5-Port charger and recently a Mobiilink 6-Port 60W charger all with the same results. Any ideas as to what may be wrong (if any). My phone has been charging for the last 3hrs and is only at 50% after being plugged in at 9%. Thanks in advance for any help.
Click to expand...
Click to collapse
As far as I can determine, neither of the chargers you mention are Qualcomm Quick charge certified. So you won't be able to get the fastest charge with them. Anker does make chargers that are qualcomm certified, but the one you have isn't. Mobilink has zero devices that are certified.
No matter what words are used by the manufacturer, unless they are qualcomm certified you are more than likely out of luck..
What about the charger that came with the phone? It is certified and will most definiitely give you a fast charge.
The V10 is equiped with qualcomm fast charge 2.0 technology. Fast charge 3.0 is available on a few devices and there are lots of manufacturers advertising chargers that are quallcomm fast charge 3.0 certified. I personally would avoid these as they won't speed up the charge rate of the V10 and are usually sold at a premium price.
Thanks for the reply. The phone DOES quick charge. It seems that when I'm using the phone while charging, it charges slowly (>500mA) . When I set it down, it will charge fast (<1.5A). The charger that came with the phone is Qualcomm fast charge 2.0 as well as the 5-port Mobiilink (only one port).
Hi, got the Nexus 6. Don't have the Motorola Turbo charger with it and it's not available in my country. Can you please help me in choosing the best quick charger from the ones available in my country? Here are some of the quick chargers that I can buy:
1. Tronsmart TS-WC1Q
2. Aukey PA-U28 Turbo
3. Tronsmart TS-WC3PC Quick Charge 2.0
4. USAMS US Plug Qualcomm Quick Charge 2.0 EPA-466644
5. Pisen Quick Charge 2.0 QC2.0 TS-C057
6. ROCK Quick Charge 2.0
Thanks in advance
yasirrfc said:
Hi, got the Nexus 6. Don't have the Motorola Turbo charger with it and it's not available in my country. Can you please help me in choosing the best quick charger from the ones available in my country? Here are some of the quick chargers that I can buy:
1. Tronsmart TS-WC1Q
2. Aukey PA-U28 Turbo
3. Tronsmart TS-WC3PC Quick Charge 2.0
4. USAMS US Plug Qualcomm Quick Charge 2.0 EPA-466644
5. Pisen Quick Charge 2.0 QC2.0 TS-C057
6. ROCK Quick Charge 2.0
Thanks in advance
Click to expand...
Click to collapse
Check the capacity of the chargers.
The original M-charger has a capacity of 1,6 A at 5V. You can use any charger with at least that capacity.
NLBeev said:
Check the capacity of the chargers.
The original M-charger has a capacity of 1,6 A at 5V. You can use any charger with at least that capacity.
Click to expand...
Click to collapse
Thanks. However, i also wanted to know the experience of existing users with these chargers, including power issues etc. I think I saw somewhere that the micro USB side of a quick charger melted when it was kept on in the power socket?
yasirrfc said:
Thanks. However, i also wanted to know the experience of existing users with these chargers, including power issues etc. I think I saw somewhere that the micro USB side of a quick charger melted when it was kept on in the power socket?
Click to expand...
Click to collapse
Get the Aukey one, it has a really really good review rate at Amazon. It also should come with a cable so you shouldn't be worried about that one.
yasirrfc said:
...wanted to know the experience of existing users with these chargers, including power issues etc.
Click to expand...
Click to collapse
I prefer wireless charging for my N4 and N6.
I am using cheap QI-chargers on several places. The QI-pads can be used with almost any USB charger. Of course wireless charging is slow.
I'm thinking of going with the Tronsmart WC1Q as it is cheap and has good Amazon reviews. I'm not really technical when it comes to chargers. This is the technical info: 5V/2.1A 9V/2A 12V/1.5A. Can anyone confirm if the power details of this charger will be fine with Nexus 6?
yasirrfc said:
I'm thinking of going with the Tronsmart WC1Q as it is cheap and has good Amazon reviews. I'm not really technical when it comes to chargers. This is the technical info: 5V/2.1A 9V/2A 12V/1.5A. Can anyone confirm if the power details of this charger will be fine with Nexus 6?
Click to expand...
Click to collapse
As long as it is Certified by qualcomm you should be fine.
Check this and if its mentioned there you can buy it:
https://www.qualcomm.com/documents/quick-charge-device-list
blanco2701 said:
Get the Aukey one, it has a really really good review rate at Amazon. It also should come with a cable so you shouldn't be worried about that one.
Click to expand...
Click to collapse
I recommend the aukey as well, I used it for my moto x 2nd gen and now my Nexus 6.
I got a Aukey one, and it's really great
In my experience and from others Anker makes good products might want to check into them. And a good charging cable is just as important.
Sent from my Nexus 6 using Tapatalk
I have an Aukey and a Tronsmart. Both work well. Strangely enough, the quality of your USB cable also appears to play a legitimate role in whether Quick Charge2.0 is consistently recognized and used. In other words, high quality charger AND high quality cable is recommended!
just want to ask if there is any correlation between using QC chargers & getting a bloated battery?
yasirrfc said:
I'm thinking of going with the Tronsmart WC1Q as it is cheap and has good Amazon reviews. I'm not really technical when it comes to chargers. This is the technical info: 5V/2.1A 9V/2A 12V/1.5A. Can anyone confirm if the power details of this charger will be fine with Nexus 6?
Click to expand...
Click to collapse
Most important is the 5V/2.1A. This is better than the original Motorola charger I have.
The other values are for Quick charging.
Also better than the original charger.
But I don't know if this Tronsmart is compatible with the quick charging mode of Motorola.
iluvatrix said:
just want to ask if there is any correlation between using QC chargers & getting a bloated battery?
Click to expand...
Click to collapse
Not at all... the phone is made to be compatible with QC. You can even use the QC charger with a phone that doesn't support it, what will happen is that the charger won't activate the QC and just charge at normal speed.
NLBeev said:
Most important is the 5V/2.1A. This is better than the original Motorola charger I have.
The other values are for Quick charging.
Also better than the original charger.
But I don't know if this Tronsmart is compatible with the quick charging mode of Motorola.
Click to expand...
Click to collapse
As long as it is Qualcomm 2.0 Certified it is supposed to work. Motorola's "turbo charge" is just a rebranded Qualcomm 2.0 Quick Charge.
I have just tried the Aukey in your list with my N6 and it did not work as a fast charger even tough the specs of the charger says so. to get the N6 to charge at QC2 you will need a charger with 9V 2A or at least 1.6A to reach approximately 14.4 watt.
many chargers do have the said specs but they won't recognize the N6 as a fast charging phone unfortunately. meanwhile still searching
ROIDjoy said:
I have just tried the Aukey in your list with my N6 and it did not work as a fast charger even tough the specs of the charger says so. to get the N6 to charge at QC2 you will need a charger with 9V 2A or at least 1.6A to reach approximately 14.4 watt.
many chargers do have the said specs but they won't recognize the N6 as a fast charging phone unfortunately. meanwhile still searching
Click to expand...
Click to collapse
My aukey works just fine, been using it for a while now. I even have a aukey portable battery charger with QC 2.0 and it works great as well, especially when I go out and play Pokémon Go
chapelfreak said:
My aukey works just fine, been using it for a while now. I even have a aukey portable battery charger with QC 2.0 and it works great as well, especially when I go out and play Pokémon Go
Click to expand...
Click to collapse
Thanks for your reply then it must be the piece that I have used had some problem
Sent from my HUAWEI NXT-L29 using XDA-Developers mobile app
I use this one and it works perfectly for me. It has an LED that changes color depending on whether it is in normal charging or fast charging mode. Unfortunately, I don't think it is on your list.
Fred
I am getting a kind of a weird experience this end. I use my Huawei quick charger of the mate 8, and it is only recognized by the Motorola Nexus 6 as a fast charger after I reboot the mobile then it starts charging at 9.15 V and 1.36 Amps. it does fast charge at this volt and amps at highs of 2240 mAps on Ampere application !!
I could not figure out another way to get the charger to recognize the Nexus 6 as a fast charging phone except by rebooting, and still working on it. in the meantime I have ordered a Choetech QC 3.0 and waiting for arrival. my question does this happen on your chargers or does it connect directly to 9V when connected to chargers like Aukey, Tronsmart, Anker etc. ??
Guys, is it normal that the phone get heated like an iron box when charging ? ( Well I noted that this happens only if my battery is below 50-60% ) Using Stock charger. Same happens (heating, but temperature is lower than before) even when I use One+ charger.
When I say Quick Charge, I mean proper QC technology, not some "quick" or "fast" charging method unique to Huawei only.
The stock charger says [email protected] or [email protected] QC2 and 3 can do [email protected] However when I put the M5 onto my QC3 charger, it only draws [email protected] as tested with a cable with V/A reading.
Charger and cable had been tested to work at proper QC power with my ZTE Axon 7, drawing 18W and also a Moto G4 Turbo Charging.
The strange thing is, if there is some "special" Huawei only technology on the stock charger, it still charges my Axon 7 and G4 with "standard" QC3. Anyone has been successful charging their M5 on a standard QC2/3 charger?
Only does fast charge when the screen is turned off.
there's also a possibility that your volt/amp meter is blocking the fast charge also.
Michaelflat1 said:
Only does fast charge when the screen is turned off.
there's also a possibility that your volt/amp meter is blocking the fast charge also.
Click to expand...
Click to collapse
Tried it with screen on or off, and even with the M5 off, still 10W on a non stock QC3 charger.
Cable definitely works for quick charge because I used the same cable on the stock charger and it reads 18W, so it is not blocking anything.
I use this QC3 charger. I get the dual lightning bolt symbol which I think means fast charge.
https://www.amazon.ca/gp/product/B01GFDSO1M
Obveron said:
I use this QC3 charger. I get the dual lightning bolt symbol which I think means fast charge.
https://www.amazon.ca/gp/product/B01GFDSO1M
Click to expand...
Click to collapse
Yes, 2 lighting symbol means QCing. However it does not show on my non stock QC charger. My other QC-able devices does on both that charger and the Huawei stock one, strange.
Huawei's fast charge is not part of the Qualcomm's QC standard. However I have found that QC3 is cross compatible with Huawei M5's fast charge.
My 2 cents.
For what its worth, I use this charger:
https://www.amazon.ca/gp/product/B01GFDSO1M
with this cable:
https://www.amazon.ca/gp/product/B01E716UQA
Not the cheapest available, but quality is top notch.
Obveron said:
Huawei's fast charge is not part of the Qualcomm's QC standard. However I have found that QC3 is cross compatible with Huawei M5's fast charge.
My 2 cents.
For what its worth, I use this charger:
https://www.amazon.ca/gp/product/B01GFDSO1M
with this cable:
https://www.amazon.ca/gp/product/B01E716UQA
Not the cheapest available, but quality is top notch.
Click to expand...
Click to collapse
This is what I use: http://amzn.eu/cLL0gg9
Cable shouldn't matter for QC and proven not to matter as I used the same random cable (and also the cable with the V/A meter) on this charger and the stock charger. It QC my M5 and Axon 7 on the stock charger but only QC my phone on the Aukey charger.
I have a USB C charger ordered, will see if that works better with the M5.
Obveron said:
Huawei's fast charge is not part of the Qualcomm's QC standard. However I have found that QC3 is cross compatible with Huawei M5's fast charge.
My 2 cents.
For what its worth, I use this charger:
https://www.amazon.ca/gp/product/B01GFDSO1M
with this cable:
https://www.amazon.ca/gp/product/B01E716UQA
Not the cheapest available, but quality is top notch.
Click to expand...
Click to collapse
I had since discovered that Huawei does not use QC standards but their own FCP for fast charge. Some QC chargers have that ability built in, but not all. Time to invest in more chargers I think.
Further update: My charger with USB PD arrived and no, it does not charge the M5 (FCP) nor my Axon 7 (QC3) fast. However the M5 charges off my Tronsmart portable charger with VoltIQ and QC3. I had done a bit of digging around and found (so far) that only Tronsmart make any chargers that can support both standards at the same time from the same port. This is great as it is when I am out and about I will need quick charging most.
Sadly they do not (at the moment) make a charger with, say 2 x QC + VoltIQ ports. It is either 1 x QC + VoltIQ and 4 x normal or 5 x QC + VoltIQ and that one costs a bit too much.
alvinlwh said:
Further update: My charger with USB PD arrived and no, it does not charge the M5 (FCP) nor my Axon 7 (QC3) fast. However the M5 charges off my Tronsmart portable charger with VoltIQ and QC3. I had done a bit of digging around and found (so far) that only Tronsmart make any chargers that can support both standards at the same time from the same port. This is great as it is when I am out and about I will need quick charging most.
Sadly they do not (at the moment) make a charger with, say 2 x QC + VoltIQ ports. It is either 1 x QC + VoltIQ and 4 x normal or 5 x QC + VoltIQ and that one costs a bit too much.
Click to expand...
Click to collapse
I read this article and it says BlitzWolf BW-S6 knows the FCP charging and it will work the fast charging on Huawei. I will order one to try it...
almaalma74 said:
I read this article and it says BlitzWolf BW-S6 knows the FCP charging and it will work the fast charging on Huawei. I will order one to try it...
Click to expand...
Click to collapse
There are many chargers that can QC and FCP at the same time, BUT very few that have 2 or more ports that can do them all at once (or at least FCP+QC on one and QC on the other), just one port and the other one at normal speed. There is a Tronsmart one with 5 ports but it is quite costly.
What happens if you just plug m5 into Google phone usb-c fast charger? Like for my nexus 6p. Slow charging? How much slower? Really want one USB c charger for all my stuff.
StephenMSmith said:
What happens if you just plug m5 into Google phone usb-c fast charger? Like for my nexus 6p. Slow charging? How much slower? Really want one USB c charger for all my stuff.
Click to expand...
Click to collapse
Not sure what the nexus comes with. However I had tried it with QC3 charger and a USB C PD charger and both just slow charges. Only Huawei original charger or SOME chargers with VoltIQ can fast charge the M5.
plugging in my USB tester proves that actually it takes a 9v 2a charge from original power adapter and cable. Whilst screen is on also.
I'm looking at various chargers and cables to make use of quick charge, or at least fast charge. Correct me if I'm wrong, but I need a FCP capable charger, and a 5A cable?
Do you think these will work?
https://www.amazon.com/gp/product/B01GFE90H8/ref=nav_signin?
https://www.amazon.ca/laddertek-Com...1533821459&sr=1-10&keywords=magnetic+usb-c+5a
Ivanbarker said:
I'm looking at various chargers and cables to make use of quick charge, or at least fast charge. Correct me if I'm wrong, but I need a FCP capable charger, and a 5A cable?
Do you think these will work?
https://www.amazon.com/gp/product/B01GFE90H8/ref=nav_signin?
https://www.amazon.ca/laddertek-Com...1533821459&sr=1-10&keywords=magnetic+usb-c+5a
Click to expand...
Click to collapse
I can confirm that you do not need the original cable for FCP charge. I used a USB 3.0 (blue plug) cable that works with QC3 for FCP and this is confirmed by a USB V/A meter.
I think Huawei has their own standard. Some of my QC 2 chargers work, some don't using the same cable.
Frustrating that I can't use my Google phone usb-c charger for fast charging. How much slower is it using non Huawei fast charger? Any ideas?
StephenMSmith said:
Frustrating that I can't use my Google phone usb-c charger for fast charging. How much slower is it using non Huawei fast charger? Any ideas?
Click to expand...
Click to collapse
Huawei FCP is [email protected]=18W or [email protected]=22.5W. Not sure which one our tablet uses, at work cannot check the actual charger. However when plugged into a QC2/3 charger, it charges at [email protected]=10W. Meaning it will be between 80% to 125% more time with a non FCP charger.
Having just picked up my M5 8.4, confirm my PD charger is (apparently) quick charging the device. It says fast charge on the lock screen and I've got the double lightning bolt in the status bar. Score!
I have this belkin wireless charger
https://www.amazon.com/gp/aw/d/B01M5JEUYE?psc=1&ref=yo_pop_mb_pd_title
I place the phone on it without a case and a red light turns on which means it's not accepting a charge but it detects something. Is my wireless charging busted on my phone or is it the wireless charger?
Went and bought this one.
https://www.amazon.com/gp/aw/d/B077PQT5M3/ref=oh_aui_i_sh_pre_o0_img?ie=UTF8&psc=1
Gonna use the wall adapter that came with my phone and see if it works.
If there is anything I can do with the Belkin one, please let me know. Otherwise I'll return it. Btw I'm running stock Oreo on this phone. 8.0.0 20r (old stock firmware for bootloader unlock purposes. Gotta get on that.)
Needs to have a QC 3.0 wall adapter plugged into it for it to work with our phone.
I have the bigger version of that OMARS charger. Don't expect the full 15w. The 15w "fast wireless charging" is a retarded feature that doesn't work because of thermal throttling.
Just buy the Anker Powerwave. It's on sale right now with code ANKER002
https://www.amazon.com/gp/product/B...6e3530149c00INT&_encoding=UTF8&tag=slickdeals
Despite it only maxing out at 10W, it has an internal fan so it actually charges faster than the OMARS pad.
Go figure
Anker Powerwave
TPMJB said:
Needs to have a QC 3.0 wall adapter plugged into it for it to work with our phone.
I have the bigger version of that OMARS charger. Don't expect the full 15w. The 15w "fast wireless charging" is a retarded feature that doesn't work because of thermal throttling.
Just buy the Anker Powerwave. It's on sale right now with code ANKER002
https://www.amazon.com/gp/product/B...6e3530149c00INT&_encoding=UTF8&tag=slickdeals
Despite it only maxing out at 10W, it has an internal fan so it actually charges faster than the OMARS pad.
Go figure
Click to expand...
Click to collapse
Ankers website states that the LG V30 will only charge at 5w with this wireless charger. Not a bad deal but I would like 10w charging at least.
Klimon5 said:
Ankers website states that the LG V30 will only charge at 5w with this wireless charger. Not a bad deal but I would like 10w charging at least.
Click to expand...
Click to collapse
I actually just got the Anker Powerwave, and for some reason it won't charge at all using their QC 3.0 AC adapter. It will only work with the QC 3.0 charger I have from ZTE for my Axon 7. No idea why.