Related
According the specification out V10 supports Quick Charge 2.0.
Does this mean any charge that support Quick Charge 2.0 should work? or it more hit or miss?
I purchased this http://www.amazon.com/gp/product/B0144S0PDK
and when I connect it I don't see it indicating quick charge.
thanks
This one is tricky. Regular high-amp (2.1A) chargers don't seem to do the trick; its more about amps AND volts on this phone. The only other charger I've gotten 'fast charging' to work with is the Motorola Turbocharger I got with my Nexus 6. I suppose if you found a charger that outputs the same amperage and voltage as the LG charger it would work, in theory.
The charger that came with mine is a fast charge charger. It shows fast charge when I plug it in.
The charger that comes with does indicate quick charging when I plug it in to it.
But the car charger that I purchased that claims quick charging support does not indicate quick charging when I plug it in.
Was looking for others experience to decide if I should return and complain.
Unless the chargers say that they are Quick Charge 2.0 or 3.0 they don't quick charge our phones. AC or Cigarette lighter charger. Now, there is at least one brand of charger out there that @ 5 volts DC used to charge my Note 2 at 1800mA, but it was smart not quick.
Sent from an AT&T LG V10
It does..i bought a quick charger for my htc one m9 before and it shows the fast charging when i tether the v10 to it
The phone will detect if it will quick charge when connected to a QC 2.0, you don't get a QC when you plug it in instantly, it will also depend on how much power you already have in the phone.
Aukey is a authorized with QC 2.0 and is listed in Qualcomm site.
I've got the power..
stevenlong said:
According the specification out V10 supports Quick Charge 2.0.
Does this mean any charge that support Quick Charge 2.0 should work? or it more hit or miss?
I purchased this http://www.amazon.com/gp/product/B0144S0PDK
and when I connect it I don't see it indicating quick charge.
thanks
Click to expand...
Click to collapse
thedrizzle said:
This one is tricky. Regular high-amp (2.1A) chargers don't seem to do the trick; its more about amps AND volts on this phone. The only other charger I've gotten 'fast charging' to work with is the Motorola Turbocharger I got with my Nexus 6. I suppose if you found a charger that outputs the same amperage and voltage as the LG charger it would work, in theory.
Click to expand...
Click to collapse
RDI said:
Unless the chargers say that they are Quick Charge 2.0 or 3.0 they don't quick charge our phones. AC or Cigarette lighter charger. Now, there is at least one brand of charger out there that @ 5 volts DC used to charge my Note 2 at 1800mA, but it was smart not quick.
Sent from an AT&T LG V10
Click to expand...
Click to collapse
What RDI said.
"Quick Charge" is not "Fast Charge" or "Adaptive Charge" - All of my 2.4amp Fast Chargers do not charge the G4 or v10 any faster than an old iphone power cube. YMMV
The V10 is Quick Charge qc (Qualcomm) 2.0.
There are already a couple of threads on the subject. here and here
@ZEROLEMON_OFFICIAL makes one of the best IMHO. Anker, Aukey/Tronsmart, and Motorola Turbo Chargers have qc 2.0 compatible ones. (always a sale on groupon or slickdeals)
Our phone, like the LG G4 switches to Quick Charge when the main screen is off. And tones it down to standard charging speed if you have the main screen on. The v10 Quick Charges at about 2850mA, slightly faster than the G4 at 2000~2200mA, but slower than the Nexus 6 at 2700~3200mA.
Attached are results by CoNsPiRiSiZe on this AT&T variant, and mine on Tmobile variant. Also included is my USB Doctor Sleeve using a Motorola Turbo Charger plugged into the v10 with screen off.
I am using the Samsung adaptive car charger while driving and it shows fast charging on the lockscreen
Sent from my LG-H961N using Tapatalk
Turns out I had a bad aukey charger, I bought another for my wife and it works fine, show quick charge.
Returning the bad one and getting another.
@clockcycle how are you able to measure current using ampere with display turned off?
BurtGummer said:
@clockcycle how are you able to measure current using ampere with display turned off?
Click to expand...
Click to collapse
I have paid version with notificaion ebabled. But you can run it, leave phone alone so it can meassure. Then turn on screen and screenshot results. It takes a few seconds before it drops or remeassures.
Do these really charge all that much faster than a 2.1a charger? Debating if it's worth it to go invest into a few of these QC chargers.
Thanks
adambean said:
Do these really charge all that much faster than a 2.1a charger? Debating if it's worth it to go invest into a few of these QC chargers.
Thanks
Click to expand...
Click to collapse
QC 2.0 allows up to a maximum of 3A of current. Every QC 2.0 enabled device will vary slightly in how much power they can draw due to internal circuitry. The V10 charges at about 2.85A as shown by Clockcyle so yes, a QC 2.0 charger will charge faster than a standard 2.1A charger.
Excellent, thank you! Going to pick up some of them now then.
Hi, got the Nexus 6. Don't have the Motorola Turbo charger with it and it's not available in my country. Can you please help me in choosing the best quick charger from the ones available in my country? Here are some of the quick chargers that I can buy:
1. Tronsmart TS-WC1Q
2. Aukey PA-U28 Turbo
3. Tronsmart TS-WC3PC Quick Charge 2.0
4. USAMS US Plug Qualcomm Quick Charge 2.0 EPA-466644
5. Pisen Quick Charge 2.0 QC2.0 TS-C057
6. ROCK Quick Charge 2.0
Thanks in advance
yasirrfc said:
Hi, got the Nexus 6. Don't have the Motorola Turbo charger with it and it's not available in my country. Can you please help me in choosing the best quick charger from the ones available in my country? Here are some of the quick chargers that I can buy:
1. Tronsmart TS-WC1Q
2. Aukey PA-U28 Turbo
3. Tronsmart TS-WC3PC Quick Charge 2.0
4. USAMS US Plug Qualcomm Quick Charge 2.0 EPA-466644
5. Pisen Quick Charge 2.0 QC2.0 TS-C057
6. ROCK Quick Charge 2.0
Thanks in advance
Click to expand...
Click to collapse
Check the capacity of the chargers.
The original M-charger has a capacity of 1,6 A at 5V. You can use any charger with at least that capacity.
NLBeev said:
Check the capacity of the chargers.
The original M-charger has a capacity of 1,6 A at 5V. You can use any charger with at least that capacity.
Click to expand...
Click to collapse
Thanks. However, i also wanted to know the experience of existing users with these chargers, including power issues etc. I think I saw somewhere that the micro USB side of a quick charger melted when it was kept on in the power socket?
yasirrfc said:
Thanks. However, i also wanted to know the experience of existing users with these chargers, including power issues etc. I think I saw somewhere that the micro USB side of a quick charger melted when it was kept on in the power socket?
Click to expand...
Click to collapse
Get the Aukey one, it has a really really good review rate at Amazon. It also should come with a cable so you shouldn't be worried about that one.
yasirrfc said:
...wanted to know the experience of existing users with these chargers, including power issues etc.
Click to expand...
Click to collapse
I prefer wireless charging for my N4 and N6.
I am using cheap QI-chargers on several places. The QI-pads can be used with almost any USB charger. Of course wireless charging is slow.
I'm thinking of going with the Tronsmart WC1Q as it is cheap and has good Amazon reviews. I'm not really technical when it comes to chargers. This is the technical info: 5V/2.1A 9V/2A 12V/1.5A. Can anyone confirm if the power details of this charger will be fine with Nexus 6?
yasirrfc said:
I'm thinking of going with the Tronsmart WC1Q as it is cheap and has good Amazon reviews. I'm not really technical when it comes to chargers. This is the technical info: 5V/2.1A 9V/2A 12V/1.5A. Can anyone confirm if the power details of this charger will be fine with Nexus 6?
Click to expand...
Click to collapse
As long as it is Certified by qualcomm you should be fine.
Check this and if its mentioned there you can buy it:
https://www.qualcomm.com/documents/quick-charge-device-list
blanco2701 said:
Get the Aukey one, it has a really really good review rate at Amazon. It also should come with a cable so you shouldn't be worried about that one.
Click to expand...
Click to collapse
I recommend the aukey as well, I used it for my moto x 2nd gen and now my Nexus 6.
I got a Aukey one, and it's really great
In my experience and from others Anker makes good products might want to check into them. And a good charging cable is just as important.
Sent from my Nexus 6 using Tapatalk
I have an Aukey and a Tronsmart. Both work well. Strangely enough, the quality of your USB cable also appears to play a legitimate role in whether Quick Charge2.0 is consistently recognized and used. In other words, high quality charger AND high quality cable is recommended!
just want to ask if there is any correlation between using QC chargers & getting a bloated battery?
yasirrfc said:
I'm thinking of going with the Tronsmart WC1Q as it is cheap and has good Amazon reviews. I'm not really technical when it comes to chargers. This is the technical info: 5V/2.1A 9V/2A 12V/1.5A. Can anyone confirm if the power details of this charger will be fine with Nexus 6?
Click to expand...
Click to collapse
Most important is the 5V/2.1A. This is better than the original Motorola charger I have.
The other values are for Quick charging.
Also better than the original charger.
But I don't know if this Tronsmart is compatible with the quick charging mode of Motorola.
iluvatrix said:
just want to ask if there is any correlation between using QC chargers & getting a bloated battery?
Click to expand...
Click to collapse
Not at all... the phone is made to be compatible with QC. You can even use the QC charger with a phone that doesn't support it, what will happen is that the charger won't activate the QC and just charge at normal speed.
NLBeev said:
Most important is the 5V/2.1A. This is better than the original Motorola charger I have.
The other values are for Quick charging.
Also better than the original charger.
But I don't know if this Tronsmart is compatible with the quick charging mode of Motorola.
Click to expand...
Click to collapse
As long as it is Qualcomm 2.0 Certified it is supposed to work. Motorola's "turbo charge" is just a rebranded Qualcomm 2.0 Quick Charge.
I have just tried the Aukey in your list with my N6 and it did not work as a fast charger even tough the specs of the charger says so. to get the N6 to charge at QC2 you will need a charger with 9V 2A or at least 1.6A to reach approximately 14.4 watt.
many chargers do have the said specs but they won't recognize the N6 as a fast charging phone unfortunately. meanwhile still searching
ROIDjoy said:
I have just tried the Aukey in your list with my N6 and it did not work as a fast charger even tough the specs of the charger says so. to get the N6 to charge at QC2 you will need a charger with 9V 2A or at least 1.6A to reach approximately 14.4 watt.
many chargers do have the said specs but they won't recognize the N6 as a fast charging phone unfortunately. meanwhile still searching
Click to expand...
Click to collapse
My aukey works just fine, been using it for a while now. I even have a aukey portable battery charger with QC 2.0 and it works great as well, especially when I go out and play Pokémon Go
chapelfreak said:
My aukey works just fine, been using it for a while now. I even have a aukey portable battery charger with QC 2.0 and it works great as well, especially when I go out and play Pokémon Go
Click to expand...
Click to collapse
Thanks for your reply then it must be the piece that I have used had some problem
Sent from my HUAWEI NXT-L29 using XDA-Developers mobile app
I use this one and it works perfectly for me. It has an LED that changes color depending on whether it is in normal charging or fast charging mode. Unfortunately, I don't think it is on your list.
Fred
I am getting a kind of a weird experience this end. I use my Huawei quick charger of the mate 8, and it is only recognized by the Motorola Nexus 6 as a fast charger after I reboot the mobile then it starts charging at 9.15 V and 1.36 Amps. it does fast charge at this volt and amps at highs of 2240 mAps on Ampere application !!
I could not figure out another way to get the charger to recognize the Nexus 6 as a fast charging phone except by rebooting, and still working on it. in the meantime I have ordered a Choetech QC 3.0 and waiting for arrival. my question does this happen on your chargers or does it connect directly to 9V when connected to chargers like Aukey, Tronsmart, Anker etc. ??
Guys, is it normal that the phone get heated like an iron box when charging ? ( Well I noted that this happens only if my battery is below 50-60% ) Using Stock charger. Same happens (heating, but temperature is lower than before) even when I use One+ charger.
When I say Quick Charge, I mean proper QC technology, not some "quick" or "fast" charging method unique to Huawei only.
The stock charger says [email protected] or [email protected] QC2 and 3 can do [email protected] However when I put the M5 onto my QC3 charger, it only draws [email protected] as tested with a cable with V/A reading.
Charger and cable had been tested to work at proper QC power with my ZTE Axon 7, drawing 18W and also a Moto G4 Turbo Charging.
The strange thing is, if there is some "special" Huawei only technology on the stock charger, it still charges my Axon 7 and G4 with "standard" QC3. Anyone has been successful charging their M5 on a standard QC2/3 charger?
Only does fast charge when the screen is turned off.
there's also a possibility that your volt/amp meter is blocking the fast charge also.
Michaelflat1 said:
Only does fast charge when the screen is turned off.
there's also a possibility that your volt/amp meter is blocking the fast charge also.
Click to expand...
Click to collapse
Tried it with screen on or off, and even with the M5 off, still 10W on a non stock QC3 charger.
Cable definitely works for quick charge because I used the same cable on the stock charger and it reads 18W, so it is not blocking anything.
I use this QC3 charger. I get the dual lightning bolt symbol which I think means fast charge.
https://www.amazon.ca/gp/product/B01GFDSO1M
Obveron said:
I use this QC3 charger. I get the dual lightning bolt symbol which I think means fast charge.
https://www.amazon.ca/gp/product/B01GFDSO1M
Click to expand...
Click to collapse
Yes, 2 lighting symbol means QCing. However it does not show on my non stock QC charger. My other QC-able devices does on both that charger and the Huawei stock one, strange.
Huawei's fast charge is not part of the Qualcomm's QC standard. However I have found that QC3 is cross compatible with Huawei M5's fast charge.
My 2 cents.
For what its worth, I use this charger:
https://www.amazon.ca/gp/product/B01GFDSO1M
with this cable:
https://www.amazon.ca/gp/product/B01E716UQA
Not the cheapest available, but quality is top notch.
Obveron said:
Huawei's fast charge is not part of the Qualcomm's QC standard. However I have found that QC3 is cross compatible with Huawei M5's fast charge.
My 2 cents.
For what its worth, I use this charger:
https://www.amazon.ca/gp/product/B01GFDSO1M
with this cable:
https://www.amazon.ca/gp/product/B01E716UQA
Not the cheapest available, but quality is top notch.
Click to expand...
Click to collapse
This is what I use: http://amzn.eu/cLL0gg9
Cable shouldn't matter for QC and proven not to matter as I used the same random cable (and also the cable with the V/A meter) on this charger and the stock charger. It QC my M5 and Axon 7 on the stock charger but only QC my phone on the Aukey charger.
I have a USB C charger ordered, will see if that works better with the M5.
Obveron said:
Huawei's fast charge is not part of the Qualcomm's QC standard. However I have found that QC3 is cross compatible with Huawei M5's fast charge.
My 2 cents.
For what its worth, I use this charger:
https://www.amazon.ca/gp/product/B01GFDSO1M
with this cable:
https://www.amazon.ca/gp/product/B01E716UQA
Not the cheapest available, but quality is top notch.
Click to expand...
Click to collapse
I had since discovered that Huawei does not use QC standards but their own FCP for fast charge. Some QC chargers have that ability built in, but not all. Time to invest in more chargers I think.
Further update: My charger with USB PD arrived and no, it does not charge the M5 (FCP) nor my Axon 7 (QC3) fast. However the M5 charges off my Tronsmart portable charger with VoltIQ and QC3. I had done a bit of digging around and found (so far) that only Tronsmart make any chargers that can support both standards at the same time from the same port. This is great as it is when I am out and about I will need quick charging most.
Sadly they do not (at the moment) make a charger with, say 2 x QC + VoltIQ ports. It is either 1 x QC + VoltIQ and 4 x normal or 5 x QC + VoltIQ and that one costs a bit too much.
alvinlwh said:
Further update: My charger with USB PD arrived and no, it does not charge the M5 (FCP) nor my Axon 7 (QC3) fast. However the M5 charges off my Tronsmart portable charger with VoltIQ and QC3. I had done a bit of digging around and found (so far) that only Tronsmart make any chargers that can support both standards at the same time from the same port. This is great as it is when I am out and about I will need quick charging most.
Sadly they do not (at the moment) make a charger with, say 2 x QC + VoltIQ ports. It is either 1 x QC + VoltIQ and 4 x normal or 5 x QC + VoltIQ and that one costs a bit too much.
Click to expand...
Click to collapse
I read this article and it says BlitzWolf BW-S6 knows the FCP charging and it will work the fast charging on Huawei. I will order one to try it...
almaalma74 said:
I read this article and it says BlitzWolf BW-S6 knows the FCP charging and it will work the fast charging on Huawei. I will order one to try it...
Click to expand...
Click to collapse
There are many chargers that can QC and FCP at the same time, BUT very few that have 2 or more ports that can do them all at once (or at least FCP+QC on one and QC on the other), just one port and the other one at normal speed. There is a Tronsmart one with 5 ports but it is quite costly.
What happens if you just plug m5 into Google phone usb-c fast charger? Like for my nexus 6p. Slow charging? How much slower? Really want one USB c charger for all my stuff.
StephenMSmith said:
What happens if you just plug m5 into Google phone usb-c fast charger? Like for my nexus 6p. Slow charging? How much slower? Really want one USB c charger for all my stuff.
Click to expand...
Click to collapse
Not sure what the nexus comes with. However I had tried it with QC3 charger and a USB C PD charger and both just slow charges. Only Huawei original charger or SOME chargers with VoltIQ can fast charge the M5.
plugging in my USB tester proves that actually it takes a 9v 2a charge from original power adapter and cable. Whilst screen is on also.
I'm looking at various chargers and cables to make use of quick charge, or at least fast charge. Correct me if I'm wrong, but I need a FCP capable charger, and a 5A cable?
Do you think these will work?
https://www.amazon.com/gp/product/B01GFE90H8/ref=nav_signin?
https://www.amazon.ca/laddertek-Com...1533821459&sr=1-10&keywords=magnetic+usb-c+5a
Ivanbarker said:
I'm looking at various chargers and cables to make use of quick charge, or at least fast charge. Correct me if I'm wrong, but I need a FCP capable charger, and a 5A cable?
Do you think these will work?
https://www.amazon.com/gp/product/B01GFE90H8/ref=nav_signin?
https://www.amazon.ca/laddertek-Com...1533821459&sr=1-10&keywords=magnetic+usb-c+5a
Click to expand...
Click to collapse
I can confirm that you do not need the original cable for FCP charge. I used a USB 3.0 (blue plug) cable that works with QC3 for FCP and this is confirmed by a USB V/A meter.
I think Huawei has their own standard. Some of my QC 2 chargers work, some don't using the same cable.
Frustrating that I can't use my Google phone usb-c charger for fast charging. How much slower is it using non Huawei fast charger? Any ideas?
StephenMSmith said:
Frustrating that I can't use my Google phone usb-c charger for fast charging. How much slower is it using non Huawei fast charger? Any ideas?
Click to expand...
Click to collapse
Huawei FCP is [email protected]=18W or [email protected]=22.5W. Not sure which one our tablet uses, at work cannot check the actual charger. However when plugged into a QC2/3 charger, it charges at [email protected]=10W. Meaning it will be between 80% to 125% more time with a non FCP charger.
Having just picked up my M5 8.4, confirm my PD charger is (apparently) quick charging the device. It says fast charge on the lock screen and I've got the double lightning bolt in the status bar. Score!
does anyone tried to charge Mi 9 with this Baseus charger?
https://www.aliexpress.com/item/32988045731.html?spm=a2g0o.cart.0.0.71f43c00TyHdOp
is this charger compatible with 27W xiaomi charging?
I think it's just Quick Charge 3.0. You should buy the 27W charger imo. But i could be wrong
I have it, it does quick charge but not charge turbo
Good I stopped by XDA before purchasing it.
It does say if you scroll down on its specs it's a QC4 charger, but I assumed the described output would be a sum of both USB ports working simultaneously.
Already posted about it some weeks ago.
https://forum.xda-developers.com/showpost.php?p=79530777&postcount=73
It's indeed just a QC 4.0 charger. Will only do 18W.
Hi, I have one. For it to work properly you have to have the cable of more than 30w.
Load much faster than the original that comes in the box. I did a quick test from 75% to 100% with the phone turned off and charged in 25min; so you can assume if it's fast or not.
WTF ; does this phone even do QC4 ... the Xiaomi offical charger is 3.0 and I bought a $68 dollars Belkin QC : 4.0+ offical as per reviews and it caps out at. 3470 : it NEVER has said fast or TURBO and it ofen Ampere reports 1800 mah ? Can anyone explain this in any way
Do you really have to post the same thing in every single charger related topic ?
Ataemonus said:
Do you really have to post the same thing in every single charger related topic ?
Click to expand...
Click to collapse
I couldn't find this :/
hardtheory said:
I have it, it does quick charge but not charge turbo
Click to expand...
Click to collapse
Thanks for info dude
I suspect that Turbo Charge only happens with the 27W factory charger.
Because my Hama QC4+ charger, certified by Qualcomm, charges definitely faster than the 18W charger found in the package, but does not say Charge Fast or even Charge Turbo.
twojastara-5 said:
does anyone tried to charge Mi 9 with this Baseus charger?
https://www.aliexpress.com/item/32988045731.html?spm=a2g0o.cart.0.0.71f43c00TyHdOp
is this charger compatible with 27W xiaomi charging?
Click to expand...
Click to collapse
Call me crazy but I think it will charge the device at 27W speed.
A lot of people don't seem to realize but the "Xiaomi Turbo Charger 27W" is actually QC3, not QC4+, and it does charge the device at 27W. If you find a QC4+ charger that supports 27W and up, you will still get 27W charging but you won't see "Charge Turbo" because it will use the better, newer charging standard.
This can make charge turbo QC 3.0 and it's cheaper and with more ports:
https://www.banggood.com/AiNaU-3-US...amsung-S8-Letv-Xiaomi6-mi5-mi6-p-1168215.html
lusp00ky said:
This can make charge turbo QC 3.0 and it's cheaper and with more ports:
https://www.banggood.com/AiNaU-3-US...amsung-S8-Letv-Xiaomi6-mi5-mi6-p-1168215.html
Click to expand...
Click to collapse
Yeah but it can only charge at standard QC3 speeds, aka 18W at max. 9V/2A like the original one does. But the original one can also do 12V/1.5A. So it does not "Turbo Charge".
Careful many poster here are confused. My BELKIN true QC4.0+ never ever charged over 3200mA and averaged out at under 2200mA. Posters who speak about things without testing their theories are really frustrating. Do yourself a favor don't believe this phone accepts QC4 or QC 4.0+ (at least not @July 2019) only QC 3.0 NON FAKE xiaomi 27w can do the 4600mA + it would seem. Turbo charging is required for extremely rapid charge times. Make sure you get OFFICIAL 20V 1.35A from Xiaomi for Turbo Charge sustained charge and under one hour 0--100%
I also purchased a QC 4.0+ Hama DC charger cause Xiaomi doesn't make a DC charger to my knowledge. Guess what ; 18w ish charging speeds .. no Fast or Turbo classification ...
XIAOMI Hoe do you call this phone a QC 4.0/4.0+ unit !!! Cause look close at the charger Turbo pictures they are all using the "Original QC 3.0 Xiaomi charger that we ALL should have got in the box. Instead many of us have wasted tonnes of money and time buying useless to us QC 4.0+ tech that doesn't work or WORSE fake chargers that don't do more than 18w !! By the time we we have ordered 3-4 different chargers trying to get it to work we have to order it on Ali or gearbest or Gearvita. Cause the company does make them after all!! Enjoy the brutal shipping fees and heavy wait times. Well we order this and that trying to get the darn thing to work. So annoyed right now
Hi, I got the original charger and this if it gives the turbocharged 27w charge, however the baseus charger charges the same as the one that comes in the box or with the wireless charge.
I made this short video: https://youtu.be/nFBoPxORzEg
https://forum.xda-developers.com/k20-pro/how-to/mi-9t-pro-30w-charger-experiment-t4003595
read this. Also tested with a mi9 that my fried had. same result.( Turbo charging up to 30W using the baseus charger)
Posted for those who end up here like me and read mixed info
I also have the Baseus charger mentioned above (BS-EU906), the variant with 2 usb A ports.
When I charge with the cable from my samsung galaxy tab S5e it charges with a bit over 4200mA 20w-21w.
But when I charge with my Baseus 2m 5a capable cable (CATSS-B0G), it never goes above 3400mA ~14w.
It still chargers fast, but it is not what was advertised. Both the cable and charger are rated for QC3.
Baseus GaN charger 65W + Baseus 5A cable reaches 5000mA in Ampere, which is assuming 5V (that's what Ampere is assuming), equals to 25W. The fact is voltage in QC is never stable, it's the factor that allows it to dynamically supply power based on various parameters: battery temp, device temp, battery capacity and so on. If you have a USB-C USB doctor (and it should be more accurate than any software based monitoring) you can watch yourself that both the voltage and current are alternating constantly.
I need to buy a new phone mount for my car, so might as well get it with qi charging. Does anyone have a qi car charger they are liking for their Pixel 6?
I just ordered a cheap 15w from eBay which is magsafe suitable. I'll post more infos when it arrives.
dirtyissa62 said:
I just ordered a cheap 15w from eBay which is magsafe suitable. I'll post more infos when it arrives.
Click to expand...
Click to collapse
link?
ctakah27 said:
link?
Click to expand...
Click to collapse
15W KFZ MagSafe Charger für iPhone 12 13 Pro/Max/Mini magnetische Auto Halterung | eBay
Entdecken Sie 15W KFZ MagSafe Charger für iPhone 12 13 Pro/Max/Mini magnetische Auto Halterung in der großen Auswahl bei eBay. Kostenlose Lieferung für viele Artikel!
www.ebay.de
But It will arrive next week
Just got one of these
Auckly Wireless Car Charger, [Electromagnetic Sense] Qi 15W Fast in Car Wireless Charger Automatic Sensor Phone Holder Vent Mount Compatible for S20/S10,for iPhone 12 13 Pro Max Mini 11 Pro XS/XR etc: Amazon.co.uk: Electronics & Photo
Auckly Wireless Car Charger, [Electromagnetic Sense] Qi 15W Fast in Car Wireless Charger Automatic Sensor Phone Holder Vent Mount Compatible for S20/S10,for iPhone 12 13 Pro Max Mini 11 Pro XS/XR etc: Amazon.co.uk: Electronics & Photo
www.amazon.co.uk
Seems to work well so long as you use a QC 3.0 adaptor in the car to power it. Then it charges at around 2A. Works through the case I have and doesn't require a 'magsafe ring/adaptor' stuck to the case to make it stick. The motorized clamp is cool, though the novelty will no doubt wear off soon enough.
I noticed most suggested QC 3 charger so I bought one plug in for my car and replaced my cigarette lighter in the truck with a dedicated USB. What a difference charging. Now I just need to settle on a wireless mount.
Yes, annoying to have to buy a QC3.0 plug when the world is moving to PD
The Pixel 6 uses PPS for the fastest speeds (which is a subset of PD 3.0). So while QS will still charge your phone faster than a standard charger, it is not the standard needed for the fastest charging on this phone.
Anyone looking to purchase a new wired charger for the Pixel 6 series should look for one that has "PPS support" and at least 30 watts of charging power. If you are looking for wireless charging, look for a Qi charger with at least 23 watts of charging power. Anything else is going to provide slower charging speeds.
Edit - I should note that apparently not all PPS chargers are working at max charging speed on the P6 either (even those with 30w or more of power). To be 100% sure your charger will be at max speed, you probably want to buy the Google brand one. Of course this is exactly why Google has made the charger an issue in the first place - to sell their version.
Anyone try these with wired Android Auto? Wondering if that works.
sic0048 said:
The Pixel 6 uses PPS for the fastest speeds (which is a subset of PD 3.0). So while QS will still charge your phone faster than a standard charger, it is not the standard needed for the fastest charging on this phone.
Anyone looking to purchase a new wired charger for the Pixel 6 series should look for one that has "PPS support" and at least 30 watts of charging power. If you are looking for wireless charging, look for a Qi charger with at least 23 watts of charging power. Anything else is going to provide slower charging speeds.
Edit - I should note that apparently not all PPS chargers are working at max charging speed on the P6 either (even those with 30w or more of power). To be 100% sure your charger will be at max speed, you probably want to buy the Google brand one. Of course this is exactly why Google has made the charger an issue in the first place - to sell their version.
Click to expand...
Click to collapse
Not a fan of fast charging myself - just reliable (wireless) charging But certainly I would only recommend a QC 3.0 device to enable a Qi charger to charge reliably where PD was not an option for it. The Qi charger I referenced does work using a conventional 2.4A 5V car adaptor, but the battery % stays the same (it doesn't go up or discharge) so it's only offsetting the discharge rate of the phone.
WibblyW said:
Yes, annoying to have to buy a QC3.0 plug when the world is moving to PD
Click to expand...
Click to collapse
Fortunately I was sure to buy chargers that had 1 PD and 1 standard to keep options open.
I use a Course Mount which is car specific.
Course Motorsports - Function Redefined
Course Motorsports designs and manufacturers innovative products across many platforms that redefine functionality.
coursemotorsports.com
sic0048 said:
The Pixel 6 uses PPS for the fastest speeds (which is a subset of PD 3.0). So while QS will still charge your phone faster than a standard charger, it is not the standard needed for the fastest charging on this phone.
Anyone looking to purchase a new wired charger for the Pixel 6 series should look for one that has "PPS support" and at least 30 watts of charging power. If you are looking for wireless charging, look for a Qi charger with at least 23 watts of charging power. Anything else is going to provide slower charging speeds.
Edit - I should note that apparently not all PPS chargers are working at max charging speed on the P6 either (even those with 30w or more of power). To be 100% sure your charger will be at max speed, you probably want to buy the Google brand one. Of course this is exactly why Google has made the charger an issue in the first place - to sell their version.
Click to expand...
Click to collapse
Not even the Google 30w charger puts out the full 30w. There's an article on Android authority.
Tidbits said:
I use a Course Mount which is car specific.
Click to expand...
Click to collapse
That's a nice little unit. I do like vehicle specific designs.
I got a magsafe compatible wireless charger with a QC 3.0 adapter.
On first test with an approx 30 min drive and gps I lost 2% battery and phone was hot.
Second test with gps and approx same drive i gained 2% battery and phone was warm.
Last try and with screen off/no gps, I gained 20% battery and phone felt normal.
I was wondering if a wireless charger with a fan would work better but for now will just plug in if i want to use gps.