Lenovo S898T+ with a really bad hardbrick - Android Q&A, Help & Troubleshooting

Hello guys I'm happy to be in this site, well there I go with my headtache.
I have a lenovo s898t+ golden warrior with a bad hardbrick when I plug it in the PC to install the ROM in SP flash tool (newest one) show me error 4032, I allready did all possible solution for that particulary error and nothing. by the way, the phone connect and disconnet several times and recognize as "usb serie device" and blinking, Im using win10 x64 and allready install win7 preloader and vcom driver x64 ... dont know is the are some incompatibility
I saw some tutorials in youtube about hardbrick on mtk phones opening to get in motherboard, I did that but I dont know where is the KCol0 or LCol0 pin, I have to use a iron wire to make a jumper between ground and that pin. I do not have much clear about it. When i make the jumper, Do I have to connect the phone into PC?
Hope you guys help me, dont know what else to do.
And sorry for my bad english guys.
Thanks in advance. :good:

Related

[Q] MT6589 GTI9500 bricked

Hi guys, I believe I have hard bricked my phone.
I was trying to solve the IMEI lost by installing these bins files (www movilesdualsim dot com/threads/ayuda-con-i9500-s4-with-mtk6589-quad-core-5-0-screen-1920-1080.47124/) using SP_Flash_Tool_v3.1304.0.119, so I was doing so and when SPFlash has finished the phone doesn't boot up anymore. I have tried to flash recovery.img with SP Flash but it doesn't even detect the phone anymore.
When I connect the phone to the PC by USB cable I can heard the connected device sound going on and off and looking the windows device manager I can see a "Alcatel Single RNDIS Interface" device connected but like I said it goes on and off every 5 seconds or so. If I put the battery on the phone it doesn't make any different.
I would appreciate so much if anyone could help me out. I don't usually bother people asking for help but I can't really find how to fix this issue and I don't know if it is even possible to fix it.
Thank in advance
pepeg said:
Hi guys, I believe I have hard bricked my phone.
I was trying to solve the IMEI lost by installing these bins files (www movilesdualsim dot com/threads/ayuda-con-i9500-s4-with-mtk6589-quad-core-5-0-screen-1920-1080.47124/) using SP_Flash_Tool_v3.1304.0.119, so I was doing so and when SPFlash has finished the phone doesn't boot up anymore. I have tried to flash recovery.img with SP Flash but it doesn't even detect the phone anymore.
When I connect the phone to the PC by USB cable I can heard the connected device sound going on and off and looking the windows device manager I can see a "Alcatel Single RNDIS Interface" device connected but like I said it goes on and off every 5 seconds or so. If I put the battery on the phone it doesn't make any different.
I would appreciate so much if anyone could help me out. I don't usually bother people asking for help but I can't really find how to fix this issue and I don't know if it is even possible to fix it.
Thank in advance
Click to expand...
Click to collapse
Hi, you solved your problem? I have the same issue, help me

Cubot s168 hard bricked

Hello.
I have a big problem with my cubot s168. I already tried to research here in forum or internet but I couldnt find the right for me. My exact problem: i installed vcom driver while my phone was turned off battery. It installed the driver but flashtool didnt regonize it. It disconnected all the time every 5 seconds and connected again even after installing the right vcom drivers. So I just opened flashtool and instert the scatter file because i couldnt install the rom.zip with cwm. It still didnt regonice my phone i just tapped start and now my phone is hard bricked. Nice i tried flashtool again but then I saw in device-manager that the phone was listed about something else (sorry I cant take any pictures because im not at home and I am using another phone from a friend). I tried again to install vcom drivers but it still shows not something with mtk preloaderxxx.. (I forgot the exact name). So what I can do now? Someone said just charge it for a week on pc and reinstall drivers but I dunno if I can even install the vcom driver if it doesnt show anything with preloader..
Why?: Touch didnt work after update and I had battery problems. I couldnt install the zip with cwm and interned research was showing me I cant even install it with recovery and I have to do it how I did but... I couldnt know that something like that happens and I already fixed an old phone which was also hard bricked.
I didnt find anything about my usb problem. (I tried all usb ports and with every cable I had (i think 4 another cable))
Here some infos about my phone:
model: cubot s168
Mt6582
Lastest firmware update with android 4.4.4
Sorry for my bad english. I would be happy if someone can help me with that if you need some info just ask me.

[q] cdc gt-i9060

Hello. First of all sorry for my English. I have 1 big problem with this phone. One my friend download 1 file and... My phone always lagging and etc. I try to do hard reset and phone not load now, show "samsung" and all, nothing more. I try to download new firmware but oden3 don't see device. I try download drivers, a lot of drivers, odin3 can't find device, and In device manager always need driver "CDC Serial". I try to find drivers from ID code, find mediatech vcom usb driver, install it, but odin3 still don't see my phone. What can I do now?
P.S. I try to install driver on 3 different computers... XP x32 Win7 x64 Win7 x64.
P.S.S If anybody have backup file pls for recovery pls send me!!!!
Somebody pls help me!
Download samsung kies it resovle ur problem

mt6572 does not recognize the USB driver preloader vcom

mt6572 does not recognize the USB driver preloader vcom
Hi guys, are days I search for on the internet but can not find anything that I try but nothing and here I am asking those who know much, much more than me hoping for an answer ...
I have a samsung clone mt6572 g900f terminal that would not light up, the computer management sees me as "Mediatek usb port" but you should see me, as I read on the internet, "preloader usb vcom" so I'm going to download the file to add the drivers manually but I always leaves the question mark and then the "mediatek port usb driver" always disconnects and when I go to download a rOM (which I still have not figured out what to download) to flash it with "SP_Flash_Tool_v3.1316.0.150 "I have an error 10
Please, if you tell me what to do and what to download to be sure I follow you step by step thanks a lot
I know a tool ....try to Google search about '15 second installer'. That should work.
sent from moto g2014 with cm13
thanks for the reply
but at the time I made a small step forward that is:
I downloaded a ROM (ROM Galaxy S5 - SuperCopy) and installed but will not turn on mica'd know a rom where lights and functions?
Antonio75a said:
thanks for the reply
but at the time I made a small step forward that is:
I downloaded a ROM (ROM Galaxy S5 - SuperCopy) and installed but will not turn on mica'd know a rom where lights and functions?
Click to expand...
Click to collapse
hello i have similiar problem with you. my computer is only detect as mediatek usb port. how you solve your problem to detect your phone as vcom port?
sorry for my bad english
pandjie said:
hello i have similiar problem with you. my computer is only detect as mediatek usb port. how you solve your problem to detect your phone as vcom port?
sorry for my bad english
Click to expand...
Click to collapse
Try 'pda net'. Do you want you use adb and fastboot then you will need driver for adb. Download 15 second installer, you can see procedure on xda forum.
sent from moto g2014 with cm13
Hi guys I'm trying in every way to flash a new rom for this phone: Samsung F033 g900f motherboard with any of you could give me a hand since you are much better than me?
thank you so much
I am attaching some pictures

I need help with the Drivers for my US P9000

Hi all, I need help trying to get the USB VCOM DRIVER to work, specifically the PRELOADER. Everything works well, except for the preloader. It gets recognised as a Mtk Usb device, the. Reconnects as a professional device, but it never gets past the Download DA Red bar. Can someone provide me with a working Preloader driver? Running Windows 10 Creator Update

Categories

Resources