Hi, I'm using S6 Edge for LG U+
After trying to get the Xperia Music on my S6, it got Bricked, showing this screen [i.imgur.com/sCUbJzV.jpg] like this prior to start, then stuck on the loop on my carrier boot screen.
Guys at Korean forum told me to reset/recover with Odin using official Firmware.
So I did! , and it worked!, everything on the phone works- apart from these two issues.
Whenever I boot the phone, I get this screen for a couple of seconds
i.imgur.com/bVRmXDm.jpg
And, it does not connect with USB- and yes, I tried re-installing the driver, and it doesn't work on my other PC/Mac As well.
Some Korean folks told me to find a 'recovery rom' not a 'odin rom' but I wasn't sure what that meant.
Any help?
Thanks in advance
did you try smartswitch??
Related
Hi guys
First of all, i read all other threads related to my thread title, nothing useful was found.
What i did:-
Grabbed my brother Galaxy Mini, Updated to gingerbread 2.3.6 with Odin Multi Downloader, Update finished, and the phone worked like a charm, but then i found that it doesn't support Arabic, so i searched for another version of GB, i did found one,and then i attempted to repeat the same procedure, it finished, but then the phone SCREEN turned WHITE
Problem:-
The only thing i see is a WHITE SCREEN,
Can't go to recovery mood
Can't go to download mood,
Odin doesn't detect my phone when i connect it via usb port
ALTHOUGH, when i restart my phone i hear the samsung welcoming tone, but the SCREEN gets PIXELATED, but i can still turn the screen lighting off and on by the on button.
Bottomline:-
Bricked Galaxy Mini, probably due to BAD installation procedure, WHITE screen keeps showing, how doomed am i?
PS: i was able to connect it to KIES, it was successfully detected, so can i install a new firmware through KIES?
Hi all.
I have already posted my problem in this thread which I have read to the end ( [GUIDE] Fix an unflashable or soft bricked I9100G )
but was not able to get any solution so I'm starting a new thread hopefully someone might be able to help me and sorry if I was not suppose to start a new thread.
My problem is as follows and hope that someone can help.
I have downloaded odin mobile and installed it on my S2 I9100 G which previously had CM 10 installed on it and I wanted to flash the official firmware using Odin mobile. I did run it and then the phone prompted me for M5 or Md5 that was detected and should click yes to verify before flashing. I clicked yes then it started verifying and when it was done it rebooted and then was stuck on the (Samsung Galaxy S2 GT-19100G black screen) and did not want to move. I waited for an hour and a half and nothing happened. When I removed the battery (I could not reset or do anything else) and put it back, the phone turned on by itself and stayed still on the starting screen (Samsung Galaxy S2 GT-19100G black screen)
Now I'm not being able to put it in recovery nor download mode.
Can any one help and anyone knows if the jtag dongle can actually force it to go to download mode even at this stage
Thanks in advance for any suggestion
Ok thank you guys. I think I was able to fix it and revive my phone.
go to service centre they solve your problem
Sent from my GT-I9100G using xda premium
Make sure you got the right M.O kernel (I9100G).
Sent from the little guy
Hi guys, I`m new to this forum and I wouldn`t be posting this topic if I found a solution on other forums. If anyone had a problem like mine, or saw a thread before, I would appreciate if you pasted a link to the solution, or gave some kind of advice.
First of all, I`m new to rooting, custom roms, etc., so I guess that whatever I did, it was my fault. I got this Galaxy S2 (GT-I9100) as a gift, and since i already had a phone, I wanted to take a risk and take a shot at installing a lollipop rom. I watched a few tutorials, it seemed simple enough, so i thought why the hell not, but in the process something went wrong...
Sooo... here is what I`ve done:
1.) Rooted my phone with VROOT
2.) Flashed custom recovery with ODIN. I`m not sure which version of CWM it was, 6.0.4.5 I think (the file is named CWM KitKar compatible-I9100). When I flashed CWM, my phone didn`t boot up. All I got was a Samsung Galaxy logo and a yellow triangle for a few seconds before my screen went black again, but I could still access both recovery mode and download mode using the combination of keys.
3.) And then I did what I think screwed up my phone. I thought maybe flashing a lollipop rom through recovery would solve the issue (maybe the recovery is incopatible with my older stock rom and it`s the reason why my phone isn`t booting). So i flashed CM12 from galaxys2root.com. It`s called CM12.1S ROM for Galaxy S2 GT-I9100 (Andorid 5.1)
Not only it didn`t solve my problem, I still can`t get my phone to boot (now I get a samsung logo and a yellow triangle, but screen doesn`t go black after a few seconds, I left it in this state till the battery ran out and still nothing). And on the top of all things, I can`t get my phone to recovery mode anymore, all I get is the yellow triangle. I can still get it into download mode, but it doesn`t connect with my PC anymore. It charges, but I can`t connect it with ODIN anymore. And the weirdest thing is, when I connect it to PC, my other USB port goes crazy and disconnect my USB Wi-Fi adapter
What went wrong? Any advice is highly anticipated. :good:
Hello Guys and Gals ^^
First of all, sorry for my english, i hope everyone can understand my problem
Yesterday my Samsung Galaxy S6 Edge shut down with an batteryload of 90%, after that it just entered a bootloop... :/
Since i've never had a CF or anything like that on my phone, i first thought of an hardware problem.
So i started reading here and some other forums, and tried as recommendet to flash the stock firmware via Odin3.
Now i can go beyond the Samsung - spondered by android or whatever it says - startscreen, the Blue LED starts and i enter the Samsung logo, which blinks for 3-4 times, just to reboot after that again... I also tried other versions of odin and other stock FW for my SM-G925F (Unbranded). Btw, also tried other USB ports, New Cables, Smart Switch... no Kies is running in the back while using odin.
Everytime i used Odin, it seems to work and my phone starts in the recovery mode with the little android guy, saying that its downloading sytem update... ERASING is the last thing he says after 20-30%, and the bootloop starts again. Also wiped cache and did Factory reset, but still no changes
I only used the 1 Part FW for odin. Hopefully that informations are enough for someone to help me out, but if there is a lack of informations, just ask for what you need to know further
I hope someone can help me, since i dont have the money for a new smartphone ^^
I tried to unroot my device but it got stuck in a bootloop, so I did some research and decided to restore it with smartswitch, it failed (I have no idea why) at around 70 percent.
The device is now showing me "An error occurred while updating the device software. Use the emergency recovery function in the smart switch pc software,
I tried to do a ton of times, I tried both the the emrgency recovery and the other option (I don't remember how it's called) and they won't work! The files are downloaded but then when the process starts it always gets stuck at 0 percent! I also tried to install the drivers, nothing
I alaso tried to flash a stock rom (no brand but I'm using TIM) and it immediately failed.
The device is a samsung s6 SM-G920F, it had 6.0.1 and m brand is TIM. Odin version is 3.12.3. I'm dowloading another stock firmware with my brand and 6.0.1, hopefully, does someone know why everything is not working?
Please help I'm going crazy
You may have to send your device back to your manufacture to get it fixed
Sent from my Transformer TF101 using Tapatalk