Related
First, I'd like to thank ShiShir for the wonderful ROM. It is very smooth and have not seen any issue with it. I'm still a noob here so I couldn't post to the OP.
All apps seems to be working fine but Magic Piano by Smule is saying "incompatible device". Kies software also seems to have trouble connecting via USB. It is also a bit laggy but I'm sure it will only get better as it gets 'cooked'.
Anyone have any idea about Magic Piano and Kies?
Flashed the latest Shishir ROM with UCLE5 Modem and Touchwiz UX Launcher. Thanks to Shishir for a good job.
Comments and observations:
1. When originally installed Skype did not work. Uninstalled the Skype apk and re-installed and it is functioning.
2. MHL is functioning.
3. Bluetooth pairing working.
4. Overclocked to 1400 with Set CPU, no problems.
5. Battery life is improving (second day). Charging is fast.
6. Miss the contacts in the Phone Dialer. But good reception and voice quality.
Will add more as I get more experience with this ROM.
Dear All,
The case of my phone is quite peculiar because there are several very serious problems, that combine together and make it impossible to use.
> The main problem is the lag. Still after i flashed the CM 13 and i am using the last Boeffla Kernel it lags so bad that i can't use it properly. Sometime to launch an app takes 5/6 seconds. This isn't changed even with different configuration for the Kernel.
The problem connected with the lag is that it takes ages to launch the apps, specially the gapps. It takes ages to launch chrome or maps or gmail. usually after are being launched they work, but apps like chrome are difficult to use on multiple tabs for instance. In general the multitasking is very slow.
>Another problem is that after the screen is locked it it takes at least 3 seconds to to being reactivated, same timing with every phisical button that wake the device up.
>The last problem is that the connection, either 3g or any other, sometimes is present sometimes is not, but it doesn't depend on the area, for instance sometimes works in my room sometimes not.
Is there someone who can help me to find a solution for these problems?
@Volkert Gage:
If everything run fine before CM13, do a clean flash without GCrap and custom kernel - perhaps you fished the wrong GApps.
If there were problems before, go back to firmware to repair.
rp158 said:
@Volkert Gage:
If everything run fine before CM13, do a clean flash without GCrap and custom kernel - perhaps you fished the wrong GApps.
If there were problems before, go back to firmware to repair.
Click to expand...
Click to collapse
thank you for your adivice rp158,
The fact is that these kind of problems (except for the connection) are not new for the phone, i always had it, even with the original firmware.
Before the upgrade to CM 13 i tryed to sort it with the original firmware but nothing worked.
Anyway, can i ask you what gapps pack do you reckon might work better on the phone?
@Volkert Gage: I recommend strongly to flash latest firmware +factory reset. You can't expect any stable LP or MM, if Sammy JB struggles.
@rp158 i'll try to do so then, thank you.
Hi everyone.
I just installed Remix OS dual boot with windows 10 and used Grub2win to boot. I can boot perfectly to Remix OS, but sometimes there is no wifi and sometimes there is after I reboot. My problem is Remix OS freeze everytime after 5 minutes of using, even though I just use web browsing. Did anyone have the same problem?
My system is Asus transformer book T200.
Thanks
jacenguyen said:
Hi everyone.
I just installed Remix OS dual boot with windows 10 and used Grub2win to boot. I can boot perfectly to Remix OS, but sometimes there is no wifi and sometimes there is after I reboot. My problem is Remix OS freeze everytime after 5 minutes of using, even though I just use web browsing. Did anyone have the same problem?
My system is Asus transformer book T200.
Thanks
Click to expand...
Click to collapse
I have the same freezing problem on my lenovo yoga 2 11. Boots fine then the main desktop freezes. I can still click on the taskbar for a while until that freezes too. Had reported to devs a couple months ago.
cheeserocket said:
I have the same freezing problem on my lenovo yoga 2 11. Boots fine then the main desktop freezes. I can still click on the taskbar for a while until that freezes too. Had reported to devs a couple months ago.
Click to expand...
Click to collapse
Glad to hear from someone had the same problem. I tried to find solutions on many forums but no hope.
jacenguyen said:
Glad to hear from someone had the same problem. I tried to find solutions on many forums but no hope.
Click to expand...
Click to collapse
Have you try the latest version of remix os. Get it from the link below.
https://mega.nz/#!9lkTWDiI!as99QTFGw2UYkFkHQWBVCX-pKpxkT7McLs27t-wfVHM
Sent from my GT-N7105 using XDA-Developers mobile app
Yup, desktop still freezes with the new release too. Sometimes the screen goes full black. It does come back though after a while. When the system freezes I usually just wait a few minutes and it recovers. The problem? I can't use it like this. My nVidia card is still unsupported so my CPU still overheats when anything moves on the screen...I had high hopes for the new Remix OS release Oh well...still waiting for my Chromebook to get the Android Play Store. It looks like that will be the only decent way of running Android apps on something else than a phone/tablet.
Can you look at this.
http://freaktab.com/forum/tv-player...an-and-streaming-connection-stability-problem
Let me know if it works.
Are you booting from USB? OR did you install to HDD?
One more thing to add is my camera is default ON at the startup (camera light is on). How to turn it off?
I'm seeing this freezing with RemixOS B2016063002 (v2.0.402) running in VirtualBox in Win10-- installed following instructions here. While RemixOS is slow (e.g. mousing around in a simple app is painful) it works initially. Then I go and do something else in Win10 for a handful of minutes and come back to a frozen RemixOS display. Something appears to still be running on the system as VirtualBox indicates hard drive and network activity.
I have the same problem, it stopped at 2.0.402 update (been using it for +1 hour)vv. It was because of the nouveau driver that didn't support acceleration in my card so after some 3D rendering the PC simply 'dies' LOL..
RemixOS: turning powerful gaming rigs into crawling soviet-era machinery since 2015.
mine too.. Im using asus x451ma and it hangs everytime when i use app like mobile legends and coc then suddenly i cant use my mouse and keyboard.. not just remix os but also in phoenix os.. i tried installing remix to my gf's acer laptop and it was fine and it was like.. FUUUCCKKKK what the hell just happen?? any solution there guys?
Freeze and reset
I have same problem in my asus laptop ! but after freeze it auto reset my laptop also ! Is it this problem cause in Asus laptop ? I install in acer and it working fine !
Hi @Deepflex,
first thanks for your work. Rom works very good!
With Stable 1 I have the same Bluetooth problem that were previously fixed in RC6. The Main problem is that BT audio playback not work after reconnecting BT device.
Home button function like Stock would be nice. With button remapper app, the double tap function is not possible, without pro Version.
Add APP configuration to the left button would also be nice!
Camera APP crashes in HDR mode with 13MP.
The stock Camera has a slow motion function. This will also be nice in CM.
Many thanks
nbk35 said:
Home button function like Stock would be nice. With button remapper app, the double tap function is not possible, without pro Version.
Add APP configuration to the left button would also be nice!
Click to expand...
Click to collapse
@Deepflex have say
No, only with app Button remapper
Click to expand...
Click to collapse
@Deepflex use not the stock rom for development he use the cm 13 from other developer for work
and Deepflex use not the original Kernel
Use the original stock rom this was better and for better battery life use Doze from Playstore
nbk35 said:
Hi @Deepflex,
first thanks for your work. Rom works very good!
With Stable 1 I have the same Bluetooth problem that were previously fixed in RC6. The Main problem is that BT audio playback not work after reconnecting BT device.
Home button function like Stock would be nice. With button remapper app, the double tap function is not possible, without pro Version.
Add APP configuration to the left button would also be nice!
Camera APP crashes in HDR mode with 13MP.
The stock Camera has a slow motion function. This will also be nice in CM.
Many thanks
Click to expand...
Click to collapse
For home double tap you may want to look here: xposed p9000
qPeewster said:
For home double tap you may want to look here: xposed p9000
Click to expand...
Click to collapse
Why Deepflex can use the original Kernel and add the Original Features from the Stock Rom
I have xposed installed. Which module do you mean?
Stable 1
First thanks for all that work and love this machine.
Elephone p9000 great machine.
Deepflex thanks you for your work and effort.
About stable 1 cm13:
Pros
Great look and "feel"
Great battery time(so far the best and o already used all ROMs)
Cons
The phone gets hot and stays hot (too much?in my opinion)
The flip sensor/cover doesnt work(for those like me who bought flip cover its a bit sad not to work)
The fast charge doesnt work(for me perhaps the biggest upset,we spent money for fast charge and now we do not have it.and 1.20 charging was awesome)
Aside that its a great ROM and once again i thanks for all the support
My cons are only to alert never too say bad for those who loose hours and hours of life for the work
Salud
---------- Post added at 11:44 PM ---------- Previous post was at 11:28 PM ----------
And um sorry.i forget to tell.
I get an sd card error.
I asks me always,everytime i turn it on to format.
An error that i got a long time ago in a few ROMs.
What can i do to preventiv?
I used to have a zip wich i flash and it work to prevent bug but i deleted and dont have now :/
Someone can help?
Thanks
Awesome work so far, keep it up.
Since the beta, but only on CM i have been experiencing some crashes of the unlock screen, where it will freeze for ~30 seconds, and then resets/restarts (the launcher?)
Often goes paired with advanced notifications such as music players, not fully recovering after the 'reset', and being unusable, until the application is restarted.
Serious battery improvements over beta versions
Camera HDR still crashes
Camera can'st store photo's on SD card
FM Radio crashes on startup
Since Beta 7:
Phone doesn't connect to 3g when connected to wifi
Phone often loses connection to 3g
Phone often takes extremely long to establish 3g connection
Bluetooth Problem with my Headphones is fixed with Stable 2.
Bluetooth Car parring crashes the bluetooth stack on stabel 3
When trying to parre the P9000 with my Citroen C3 the bluetooth stack stops working. My smartwatch gets disconnected and are first able to reconnect after a disable/enable of the bluetooth.
This has happened on all builds, but works on stock.
If there is a need for logcat debug then please let me know.
Regards
Jakob
smartassistant is gone???
Where is the smartassisatant gone in settings of the phone...its lost.....cm 13 nightly
I have just installed CM13 Final Build 3. I cannot pair with my in car Bluetooth (Hyundai Tucson). For me this is a very important feature, without which I can't use CM13. Is this likely to ever be fixed or does anyone have a suggested ROM where Bluetooth works?
Stock or Eragon will work well
Fran Montero said:
Stock or Eragon will work well
Click to expand...
Click to collapse
Thanks very much. I put on Eragon 4.7 and the In-Car Bluetooth is working perfectly. I read that 4.8 comes OTA but I haven't found how to get it. Any ideas?
I went back to 4.7 from 4.8 so i recomend you stay in 4.7
I upgraded to 4.8 (there's an Eragon Update app installed with 4.7) and I'm very happy with it. Thanks for your help.
One thing I've just noticed is that my phone never switches to 4g, it's always on 3g. I'm on Eragon 4.8 now, I didn't notice if this was the case on cm13 too.
CM13 stable 3 is working good for me, except one major problem.
Netflix is opening up, but not playing any video (giving an error 1018). chromecasting a netflix video seems to work.
does anyone have the same problem? youtube and other video is working fine for me.
ps: of course I already re-installed netflix.
I noticed there weren't many posts on Leelboxes on XDA so I'll provide some quick input for anyone who may search for a review or want to ask questions.
Recently I bought a Q2 on Amazon and finally set it up last night.
https://www.amazon.com/gp/product/B01N63M03X/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Opening the box/contents
-The box had some wear on it but overall in decent shape
+Comes with power cable, hdmi, remote (no batteries)
-The box had a fairly strong plastic/soldering smell and ins't very appealing visually
Setup
- Plugging in the power starts up the device so I had everything (HDMI, mouse/keyboard) already plugged in/No physical power button
++ Quick boot up and short animation screen
-/+ Decent launcher screen probably depends on preference
-/+ Needed to adjust the screen area down to 90% as it was displaying outside of my viewing area
- Remote sluggish
+ Wireless USB keyboard and mouse are plug and play
- Still haven't figured out how to turn off the on-screen keyboard as the settings menu is device specific
- Playstore and adding Google account FC'd the first time I opened it
Customizing
+++++ Installed SuperSu from Playstore and went through the "normal" non-recovery install process successfully!
+ Installed Leanback Launcher/Google TV v1.14 (newer versions FC) APK from APK mirror and home launcher switcher
++ Kodi and addons preinstalled and setup
-Google Now launcher has icon text issues (words are cut off)
+Installed hidden settings
Performance
+ 5ghz wifi running well
- Some UI lag/stuttering
- App install a little slower than hoped
- Device comes with a memory cleaner button on the provided launcher. Once mem usage hits 80%, stuttering gets annoying. Installed memory cleaner and still evaluating.
+ Video very smooth in Kodi and Youtube
More to come but hope this helps.
How is the leelbox Q2 running? Have you tried miracast with a Windows10 laptop? Looking for a device to primarily do this.
someguyatx said:
How is the leelbox Q2 running? Have you tried miracast with a Windows10 laptop? Looking for a device to primarily do this.
Click to expand...
Click to collapse
Still running well. Mainly use it for Kodi and YT. I found an older version of Nexus Player launcher that works (except suggestions) and looks better than stock.
One complaint I do have, I couldn't get any emulators to recognize USB gamepads. If you want to do any of that, I'd stay away.
I haven't tried Miracast at all but I will if you're still interested. Let me know.
Hey there... I have a question for you. How's the video playback on your box?? I really this box, especially since it has Bluetooth and there is hardly any lag, however, I have had bad luck with it from the get-go. My video playback is horrible! The screen flickers and goes really dark when the scene is shot at night or it's indoors. Sometimes my tv goes black and if it weren't for the captioning, you'd think it's just off. Then the image perks up when the scene is outside or a really bright shot. It really does a number on my eyes as it's a constant thing. I did reach out to their customer service and they have been responsive and sent over instructions to try and fix this, but that hasn't worked. I even got the box replaced, but the issue persists. I'm thinking maybe it's a setting at this point. Would you happen to know if there is a fix to this or is there anything you would suggest? Thanks in advance!
heyitsmaya said:
Hey there... I have a question for you. How's the video playback on your box?? I really this box, especially since it has Bluetooth and there is hardly any lag, however, I have had bad luck with it from the get-go. My video playback is horrible! The screen flickers and goes really dark when the scene is shot at night or it's indoors. Sometimes my tv goes black and if it weren't for the captioning, you'd think it's just off. Then the image perks up when the scene is outside or a really bright shot. It really does a number on my eyes as it's a constant thing. I did reach out to their customer service and they have been responsive and sent over instructions to try and fix this, but that hasn't worked. I even got the box replaced, but the issue persists. I'm thinking maybe it's a setting at this point. Would you happen to know if there is a fix to this or is there anything you would suggest? Thanks in advance!
Click to expand...
Click to collapse
Hi,
Kodi seems a bit darker so I have an display setting on my TV that I toggle to vibrant and its much better. HBO Go feels the same. Other than those though, Youtube and Netflix are fine.
Any chance your HDMI cable is bad?
if it's bricked but usb burning tool recognize it but it's stuck at 2% with Romcode/Initialize DDR/Read initialize status/USB Control setup error, do someone know how to unbrick it?
washwash said:
if it's bricked but usb burning tool recognize it but it's stuck at 2% with Romcode/Initialize DDR/Read initialize status/USB Control setup error, do someone know how to unbrick it?
Click to expand...
Click to collapse
How did you brick it and what are you trying to flash on it now?
xnatex21 said:
How did you brick it and what are you trying to flash on it now?
Click to expand...
Click to collapse
trying to update with stock updated rom using the sd cart method because the rom was instable as hell and i was not able to watch a movie without problem for longer than half an hour, then i tried to install the same rom using the usb burning tool (2% error), then again with the usb burning tool i've tried this rom with the same results...
no video, i cant enter recovery, but now usb burning tool recognize it without even the need to push the reset button when i plug in the usb
washwash said:
trying to update with stock updated rom using the sd cart method because the rom was instable as hell and i was not able to watch a movie without problem for longer than half an hour, then i tried to install the same rom using the usb burning tool (2% error), then again with the usb burning tool i've tried this rom with the same results...
no video, i cant enter recovery, but now usb burning tool recognize it without even the need to push the reset button when i plug in the usb
Click to expand...
Click to collapse
I haven't tried flashing a new rom for this device yet so I may not be the best to help you. But from what I've read, the USB burning tool is your best bet. From experience, it may be a good idea to try flashing with another computer. Also, re-download the imgs.
xnatex21 said:
Hi,
Kodi seems a bit darker so I have an display setting on my TV that I toggle to vibrant and its much better. HBO Go feels the same. Other than those though, Youtube and Netflix are fine.
Any chance your HDMI cable is bad?
Click to expand...
Click to collapse
Hello! Sorry for the late reply, but I have changed HDMI cables twice and changed ports on the TV. Also, I have used an older TV I have with this box and it just doesn't work. The video just bounces from light to dark when on Netflix or streaming any other type of video including YouTube. I have attempted to play with any settings on the box but nothing changes. Kinda bummed, oh well right?
heyitsmaya said:
Hello! Sorry for the late reply, but I have changed HDMI cables twice and changed ports on the TV. Also, I have used an older TV I have with this box and it just doesn't work. The video just bounces from light to dark when on Netflix or streaming any other type of video including YouTube. I have attempted to play with any settings on the box but nothing changes. Kinda bummed, oh well right?
Click to expand...
Click to collapse
I read something in another thread where the person created a new ROM for devices LIKE ours. I believe some have used it but can't say if it works. Seems your issue is common:
https://forum.xda-developers.com/search/thread/3513805?query=dark
Hi,
In product description it said this is dual wifi enabled (2.4 and 5Ghz) box. So I installed internet wifi router with 2.4 and 5GHz possibility, and Q2 Pro box pick up just 2.4Ghz signal.
Then I turned off manually 2.4GHz possibility in router and Q2 Pro box didn't see any wifi network, while my LCD and PS4 was connected on 5GHz without problem.
So, my question is, how to enable receiving 5Ghz wifi signal on Q2 Pro box?
Thank you
I've been having some trouble rooting the Q2 Mini Leelbox, wondering is that a different model than the Q2? i am also having an issue changing the default home launcher on my box, it seems like the Zonglauncher that is installed on it wants to be the only proprietary launcher option an because i cant gain root, I can't run effin system app deletion.
I figured kingroot would do it, but it has not been of any help so far. Shoot I've googled Root Leelbox Q2 mini and pretty much theres nothing out there. must not be a very popular box. now that i noticed it is rockchip, i'm a little disappointed with it, might even return it, but it does have 2G/8G for only 43 Dollars on amazon.
did anyone install recovery twrp and Magisk?
WowTheDog said:
I've been having some trouble rooting the Q2 Mini Leelbox, wondering is that a different model than the Q2? i am also having an issue changing the default home launcher on my box, it seems like the Zonglauncher that is installed on it wants to be the only proprietary launcher option an because i cant gain root, I can't run effin system app deletion.
I figured kingroot would do it, but it has not been of any help so far. Shoot I've googled Root Leelbox Q2 mini and pretty much theres nothing out there. must not be a very popular box. now that i noticed it is rockchip, i'm a little disappointed with it, might even return it, but it does have 2G/8G for only 43 Dollars on amazon.
Click to expand...
Click to collapse
It must be a different version. If I recall correctly, I didn't have to install anything to get root. I just ran a root checker and confirmed I was good to go.
I also was able to install any launcher I wanted. But in the end, their launcher was good enough for the apps I use (Kodi, Netflix, HBO Go, Youtube).
salser0 said:
did anyone install recovery twrp and Magisk?
Click to expand...
Click to collapse
No. I don't think there is a TWRP version for this device.
I ended up shipping it back for a refund. Really was quite a pos if I ever did see one. Made me pretty angry tbh, it was a rockchip anyways I mean it did have 2g/8g but certainly performed worse than some 1g/8gs ice bought in the past.
i have the mini
*works fine ..no lag or stuttering
*only problem is weak wifi with no 5ghz support
#im looking for info regarding using a d'link wifi dongle with it to boost wifi
to everyone this box is prerooted
install any app and if it requests root it will be given root automatically without even a toast message
you can enter recovery and factory reset or flash updates or even flash update zips by inserting a needle / pin / toothpick into the headphone jack amd pushing down at which point you will feel the button click...keep the button in then pull out the power cord and put it back in and it will boot to recovery ...you can rename supersu as update.zip amd flash it from sd card to replace root or get root management apk installed ..you can also install supersu apk directly from playstore
you can enable developer settings by usual means by pressing on version number in settings/about
i am looking into solving wifi problem first ...then i will try to flash custom images
my first workaround is to boot Ubuntu from sd card and install opemelec or omc or similar
*reason is amazon prime video fails playback in both apk or browser
*netflix is working fine through apk
*kodi is running smoothly
by installing linux through sd card i will try to get better wifi by wifi dongle and then by getting playback working for amazon video ..if i succeed i will create a thread and a post a link and proceed from there ..i think we might be able to port or flash some other custom firmware too ...i will try it after Ubuntu....
hello
i just buy a leelbox q4 plus and i searsh in the net for root this android tv box but i dont found , it s this box https://www.amazon.com/dp/B07P7MFR5L/ref=emc_b_5_t
maybe it s not possible but if it s possible maybe you help me for that thank for advance