I would like to hard reset my phone, and flash it with the latest CM13.
But every other time in the past i did a factory reset a bunch of junk folders were still left on the internal SD card, so I would like to know if there is a way to do a full clean wipe?
And once that is done, I know I am going to need the latest CM13 nightly zip for i9300, so I was gonna put that on my external sd card and put that in once the hard reset is complete. I also know I am going to need GoogleApps, but I don't know which one I should download from http://opengapps.org/?api=6.0&variant=nano
But that's all I know, it's been a long time and I am very out of touch with this, so full disclosure, I am hoping someone here could give me like 10 steps to follow.. I don't need detailed instructions like where in Odin to click, but just general how to do the hard reset, what to download, and in what order to install it would really help me a ton.. Or just point to like 3 similar questions where I can follow the instructions even..
I really appreciate anyone giving me a hand with this. Thank you.
warriotox said:
I would like to hard reset my phone, and flash it with the latest CM13.
But every other time in the past i did a factory reset a bunch of junk folders were still left on the internal SD card, so I would like to know if there is a way to do a full clean wipe?
And once that is done, I know I am going to need the latest CM13 nightly zip for i9300, so I was gonna put that on my external sd card and put that in once the hard reset is complete. I also know I am going to need GoogleApps, but I don't know which one I should download from http://opengapps.org/?api=6.0&variant=nano
But that's all I know, it's been a long time and I am very out of touch with this, so full disclosure, I am hoping someone here could give me like 10 steps to follow.. I don't need detailed instructions like where in Odin to click, but just general how to do the hard reset, what to download, and in what order to install it would really help me a ton.. Or just point to like 3 similar questions where I can follow the instructions even..
I really appreciate anyone giving me a hand with this. Thank you.
Click to expand...
Click to collapse
here you should find everything you need
if you are only looking at wiping the sdcard additionally, then using the recovery, wipe the sdcard as well...
download arm version of the gapps
srv.abhishek said:
here you should find everything you need
if you are only looking at wiping the sdcard additionally, then using the recovery, wipe the sdcard as well...
download arm version of the gapps
Click to expand...
Click to collapse
Ok, so I should download stock firmware from Sammobile.com, flash it on my phone with Odin,
then root it, flash a recovery, flash a CM13 rom and then install the gapps (ARM, 6.0, NANO) ?
warriotox said:
Ok, so I should download stock firmware from Sammobile.com, flash it on my phone with Odin,
then root it, flash a recovery, flash a CM13 rom and then install the gapps (ARM, 6.0, NANO) ?
Click to expand...
Click to collapse
Umm.. why do you want to do that? your phone is already rooted, isn't it? you just want a clean wipe so while wiping caches and data, wipe internal sdcard too..
Usually we flash stock firmware and then go for the steps you mentioned when there is some issues with filesystem or imei, etc
so
1. wipe inc sdcard
2. install ROM from extSDCard. Incase you are using TWRP 3.x, you can access sdcard on your pc even from the recovery mode
3. flash gapps and you are done
Related
Hey guys!!!
New galaxy S2 owner. I have done some searching in these forums and the threads answered many of my questions. However, I still have some newbie questions that I found unanswered. Please excuse me if my questions have been answered before but I got tired of searching
Here is the deal:
Yesterday, I flashed a CF Root with Odin3. Then used CWM to flash a wanamlite firmware. The firmware was great but I didn't like that it still had TW. So I dl'ed another firmware to the internal SD card and flashed again using CWM. I then flashed a couple of other ROMS and I noticed that after the first wanamlite flash, the new ROMs were unstable with many error messages that some OS processes have stopped etc.
I got back home, flashed to stock with Odin3 and the phone got stuck at the second samsung logo. I followed some community steps (thanks XDA) like disabling all kies processes from TM, wiping data/cache, then boot in DL mode and flash the stock ROM using Odin3 which worked.
I then Flashed a CF Root again and used CWM to flash a Spike Pure ICS ROM v5 which was great but I get occasional error messages like 'gallery stopped' or some other error message when I try to set contact photos. It just lags, blackscreen then comes back with the 'Unfortunately, the process had stopped'.
My questions: is this because of the previously flashed firmware that this is happening or is it that those ICS ROMs have these issues commonly? Did anyone have this experience before? What do you advice before flashing to a new ROM going back to stock or going straight from the current? Doesn't Odin3 technically wipe everything back to stock?
WIPE WIPE WIPE.
Go into recovery. Data/factory reset.
Advanced, Wipe dalvic cache. Mounts and storage, format system. Its a standard procedure going from one OS to another OS. You can then either flash a firmware zip from recovery or an .tar file from Odin.
Then to be on the safe side factory reset once again.
Sent from my GT-I9100 using Tapatalk 2
Wich fw do you have?
Make a deep clean with odin an flash on the latest ics version (lp9 is a good one)..then flash (if you want) a custom rom..
My experience with custom roms: one of the best rom samsung based (ics 4.0.3) is the foxhound greyfox v2..if you want a pure ics rom flash the omega aokp rom (ics 4.0.4)..
Try then to change kernel..siyah is the best for both roms..
P.s. sorry for my bad english
Sent from my GT-I9100 using Tapatalk 2
After LP7 should be staple enough for daily use .However you are using custom roms and you should read carefully each roms thread before flashing .
You are probably suffering from flashing multiple roms and leaving bits behind as well = clean wipe .
jje.
Can someone give me a clear full wipe procedure? I always wiped data/factory rest/wiuped chaceh and dalvik... but what else? a step by step procedure would be helpful!!
I currently have Spike Pure ICS v 5.
What do you mean by Odin3 'deep clean'?
OJ77 said:
Can someone give me a clear full wipe procedure? I always wiped data/factory rest/wiuped chaceh and dalvik... but what else? a step by step procedure would be helpful!!
Click to expand...
Click to collapse
Read my last post..
Sent from my GT-I9100 using Tapatalk 2
so:
1. Recovery mode > format user data > wipe cache > clear dalvik > format system (from moutns and storage)
2. Download mode > flash stock ROM using odin 3
Did I get it right? Was there something i didn't wipe?
Before you flash a new rom, make sure you answer the requirements.Some ICS roms need to be flashed in specific way.
The way of doing a full wipe is you go in Clockwork mode, wipe data/factory reset, you wipe cache partition, then go to advanced wipe Dalvik and Battery stats, then go in mounts and storage ( i think ) and you wipe the cache from there, but nothing else in mounts and storage.If you wipe anything else there's a high percent of bricking your phone.If this doesnt help you, I doubt that anyone could give you any clearer instructions.
Good luck.
DONT FORMAT SYSTEM.
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Followed by root and custom rom if you so wish .
jje
OK im confused now... do I format system directory in mounts and storage or no?
OJ77 said:
OK im confused now... do I format system directory in mounts and storage or no?
Click to expand...
Click to collapse
i always do personally.
I got tempted and formatted system/cache/data but now i cannot flash from my internal sd card.. I get errors and 'installation aborted' if i try to do it from CWM... does that mean formatting those 3 means Odin3 is the only way? Cus I'm not home and I don't have odin3 on me.... LOL!
OJ77 said:
I got tempted and formatted system/cache/data but now i cannot flash from my internal sd card..
Did you format sd card and totally wipe the lot = nothing on the phone .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
At this point you have no OS on the phone nor kernel rooted nor CWM .
Hence
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Click to expand...
Click to collapse
JJ, you really need to learn how to quote you know, makes your posts so confusing to read sometimes
skimminstones said:
JJ, you really need to learn how to quote you know, makes your posts so confusing to read sometimes
Click to expand...
Click to collapse
Agree must try better .
Habit from replying to emails i guess .
jje
Thanks...
I did a 'full wipe' by doing t his:
1. Boot into CWM: wipe data, wipe cache, wipe dalvik, wipe battery stats, wipe system/data/cache from mounts.
2. Reboot into DL mode, flash stock ROM using Odin3.
3. Repeat step 1
4. flashed spike ICS v 7.3 using CWM. Stable so far.
Thank you!
imho: the most stable ics release is the stock official, but with some.battery issues, my suggestion: stay on gingerbread, find a custom kernel to suits your need,
GT-I9100, official 2.3.6, hardcore's Speedmod
budi.hermawan said:
imho: the most stable ics release is the stock official, but with some.battery issues, my suggestion: stay on gingerbread, find a custom kernel to suits your need,
GT-I9100, official 2.3.6, hardcore's Speedmod
Click to expand...
Click to collapse
I agree! I don't like ICS because is still unstable! My battery lasts very short with ICS and the phone overheats.
Moreover I hate the browser! I mean, The Galax S2 with GB still has the smoother browser of all the smartphones out there, and Samsung with ICS update messed it up! Now is laggy with micro stutters! Don't understand why!
OJ77 said:
The firmware was great but I didn't like that it still had TW.
Click to expand...
Click to collapse
You didn't need to go through all that trouble just because you didn't want TW (which I also hate, btw).
You could simply have installed another launcher (such as Go Launcher EX, ADW, etc) from Play Store and, since you were already rooted, uninstalled TW using Titanium Backup afterwards. It has to be in that sequence (install new then uninstall old).
this way you can have whatever ROM + kernel combination you like, and still use whatever launcher you prefer.
hello to all
well i have tested a few ROM´s but the Custom Stock Rom (Codenam: ETERNITY) is one of the best in my opinion.
I have flashed this Rom, and it worked realy fine, my first mistake was that i did not make a backup, and my second mistake was that i have tried to flash some Mod´s.
After flashing a few Mod the Rom does not working correctly, anway i though i reflash it again, but that was not so easy as i thought.
After four time flashing, it did not work, so i thought, i flash the Original Samsung Firmware (i downloaded from Sammobile) so after flashing i rooted my S2 again and the Rom Eternity download it again, and save it in my mobile, in CWM window, i have follow this instructions.
Installation Pocedures:
If you're coming from ICS Roms, Stock Roms, AOKP/AOSP Roms or Custom Roms:
Download the zip file.
Put it in either internal or external SDCard.
Reboot in recovery, wipe data/factory reset, wipe cache partition, wipe dalvik cache.
Go to Mount and storage, format preload.
*If you do not have fromat preload in recovery (Except Philz and Jeboo kernels), Please go to Other Links section on 1st post to get the GS2ROMWipe. Then, run this in recovery*
Install the ROM.
After installation finish, reboot your device.
The first boot will take several minutes.
Please allow 5-10mins to let the media scanner to finish after configuring the Setup Wizard.
Then, open up SuperSU App and update it.
But it did not worked, later i have follow the instructions from the Video, the same problem.
I see only on Screen : " Samsung Brilliantly Stock Custom Stock ROM"
Please allow 5-10mins to let the media scanner to finish after configuring the Setup Wizard.
Click to expand...
Click to collapse
Well i have waited over 20 minutes but nothing happend.
I have ad a pic that you can see the information about my S2, and please sorry for my poor english.
I hope you guys have a idea how can i slove this problem.
Thank you all very much in advance and i hope one of you have a great solution
greets
vijay
?
Sent from the little guy
tetakpatak said:
Please quote my post and copy&paste whole text into some help thread for your phone, it is better idea as we are now getting off topic here. I'll try to help you there.
Format /system is done in recovery mode under "mount and storage" then after that you can restore your nandroid if it is done with the same recovery you use now. If you're on PhilZ 6, it usually can restore also CWM 6 backups.
Click to expand...
Click to collapse
What does format system do? And please help me load sentinel rom. That's the one I was gonna do.
Okay now for the question... I was running stock 4.1.2 with siyah kernel 6.0 b5. Then I decided to install philz kernel, but ended up in bootloop. Then I tried flashing dorimanx but still in bootloop. All the while I wiped everything before flashing.
Now im stuck as I can boot into recovery via any kernel but ultimately phone is stuck.
What to do?
And can anyone give me steps to install sentinel rom from this stage?
Sent from my Nexus 4 using xda app-developers app
AndroidReborn said:
What does format system do? And please help me load sentinel rom. That's the one I was gonna do.
Okay now for the question... I was running stock 4.1.2 with siyah kernel 6.0 b5. Then I decided to install philz kernel, but ended up in bootloop. Then I tried flashing dorimanx but still in bootloop. All the while I wiped everything before flashing.
Now im stuck as I can boot into recovery via any kernel but ultimately phone is stuck.
What to do?
And can anyone give me steps to install sentinel rom from this stage?
Click to expand...
Click to collapse
Mate, sorry for waiting, I was out of home. We will get your ROM back as soon as the phone boots again.
Don't worry, it doesn't sound serious so far. We have recovery and download mode (so topic name "nothing works" isn't really correct)
Formatting /system wipes all data from the system partition (so your system will be gone then) and it is important to do before installing new ROMs (essencially important for KitKat). It can't do any harm. As you have tried to install other kernels and didn't work we should check first what did you try to flash so far and it didn't boot? Is that what you wrote all what you have tried?
Now let me know please which recovery do you have now and is it the same version like when you have created your nandroid backup? If the recovery is the same, I would indeed try to restore nandroid backup right after wiping /system. Before you wipe the system just let me know: can you use ADB? If yes, check do you have ADB connection in the recovery mode?
tetakpatak said:
Mate, sorry for waiting, I was out of home. We will get your ROM back as soon as the phone boots again.
Don't worry, it doesn't sound serious so far. We have recovery and download mode (so topic name "nothing works" isn't really correct)
Formatting /system wipes all data from the system partition (so your system will be gone then) and it is important to do before installing new ROMs (essencially important for KitKat). It can't do any harm. As you have tried to install other kernels and didn't work we should check first what did you try to flash so far and it didn't boot? Is that what you wrote all what you have tried?
Now let me know please which recovery do you have now and is it the same version like when you have created your nandroid backup? If the recovery is the same, I would indeed try to restore nandroid backup right after wiping /system. Before you wipe the system just let me know: can you use ADB? If yes, check do you have ADB connection in the recovery mode?
Click to expand...
Click to collapse
Will it wipe the internal memory? Or the rom in the phone?
I have cwm based recovery v. 6.0.1.2. Yes I used it to make the backup.
Checking for adb.. How do I do it? .
Sent from my Nexus 4 using xda app-developers app
AndroidReborn said:
Will it wipe the internal memory? Or the rom in the phone?
I have cwm based recovery v. 6.0.1.2. Yes I used it to make the backup.
Checking for adb.. How do I do it?
Click to expand...
Click to collapse
Hi! Internal memory usually shouldn't get wiped by formatting /system, as it is "storage", not part of the system. I would give a try, wipe all: data/factory reset, cache, dalvik cache (advanced) and format /system (mounts and storage). Then back to the main menu --> backup & restore --> restore from (internal or external memory where your nandroid is saved) and choose your backup. It should reboot normally then.
tetakpatak said:
Hi! Internal memory usually shouldn't get wiped by formatting /system, as it is "storage", not part of the system. I would give a try, wipe all: data/factory reset, cache, dalvik cache (advanced) and format /system (mounts and storage). Then back to the main menu --> backup & restore --> restore from (internal or external memory where your nandroid is saved) and choose your backup. It should reboot normally then.
Click to expand...
Click to collapse
Thanks for helping, but I ended up downloading the stock rom and flashing it. Everything was normal. Then I installed cm10.2 so everything's great now. Thanks!
Sent from my Nexus 4 using xda app-developers app
Cool, @AndroidReborn! Now you can install your old ROM again and restore nandroid. Keep that stock FW saved on your PC, so if your phone gets ever again soft-bricked, no problem to revive it again.
I am wondering how nobody here responsed your help prompt, we have in i9000 help threads always handfull people of experience and skills who are ready to help in need. And there are double amount of the SGS2 units sold around the world.... strange.
tetakpatak said:
Cool, @AndroidReborn! Now you can install your old ROM again and restore nandroid. Keep that stock FW saved on your PC, so if your phone gets ever again soft-bricked, no problem to revive it again.
I am wondering how nobody here responsed your help prompt, we have in i9000 help threads always handfull people of experience and skills who are ready to help in need. And there are double amount of the SGS2 units sold around the world.... strange.
Click to expand...
Click to collapse
No idea. The people seem pretty 'busy'. Thanks for helping. Just one teeny tiny last question.. How do I install cm11 or any kitkat rom over this? Cwm is 6.0.4.5 so it's compatible...
Sent from my Nexus 4 using xda app-developers app
If you want to flash kitkat, the first thing you need to do is flash a kitkat compatible CWM (v6.0.4.7). If you try to flash KK with an 'older' CWM, you'll get 'installation aborted....error status 7' or something similar........
I'm currently running @infected_s KK build, and in the OP, you will find download links for the correct CWM, ROM and GApps files.......
Sent from my Infected KitKat bar.....
keithross39 said:
If you want to flash kitkat, the first thing you need to do is flash a kitkat compatible CWM (v6.0.4.7). If you try to flash KK with an 'older' CWM, you'll get 'installation aborted....error status 7' or something similar........
I'm currently running @infected_s KK build, and in the OP, you will find download links for the correct CWM, ROM and GApps files.......
Sent from my Infected KitKat bar.....
Click to expand...
Click to collapse
6.0.4.5 is compatible? I think so ......
Sent from my Nexus 4 using xda app-developers app
I've always read....not.....
In any case, probably best not to risk it......
6.0.4.7 is DEFINITELY KK compatible.... and it'd take a couple of seconds to flash.........
Sent from my Infected KitKat bar.....
AndroidReborn said:
No idea. The people seem pretty 'busy'. Thanks for helping. Just one teeny tiny last question.. How do I install cm11 or any kitkat rom over this? Cwm is 6.0.4.5 so it's compatible...
Click to expand...
Click to collapse
Yes, mate, CWM 6.0.4.5 is capable of flashing KitKat.
It is usually always the same:
download your ROM zip and compatible Gapps
check in the phone (or PC) if the zips are corrupted through download (if they open after clicking them, they are fine)
move the zips to the folder you will flash it from (if you use PC to flash zips with ADB sideload, put them in the sdk/platform-tools folder)
make nandroid backup of your presently used ROM
wipe data/factory reset
wipe cache
wipe dalvik cache (advanced)
format /system (under mount and storage)
flash ROM.zip
flash Gapps
reboot
It is in general always good to read in the development thread of the ROM you attend to flash in the opening post which Gapps are recommended, or if there is some unusual order of flashing (sometimes, developers recommend reboot system after flashing ROM, and after that going to recovery and flash Gapps zip.
Some KitKat ROMs struggle with root access by using Superuser, so SuperSU should be flashed. If SuperSU app from Play Store gives errors by updating binary, you should uninstall SuperSU app then, find in the Chainfire's thread the compatible UPDATE-SuperSu.zip (version for your phone), flash its zip in the recovery, install SuperSU app, update binary (either "normal" or "through CWM/TWRP")
I want to know when you say "install ROM' exactlty what do you mean? I have rooted the phone, installed all the drivers, installed ROM manager, done a factory wipe, opened the recovery programme. the phone cannot see the file no matter where I put the ROM. Can you inform me as mentioned earlier exactly where and how do you install the Optimus G3 ROM?
The ROM has been downloaded to my desktop, extracted and ready to go, but go where that is the question.
I have entered the recovery mode and that goes nowhere unless I want to wipe/factory reset again, it would be nice if I knew where the ROM was to be placed in order that my phone can see it and install it.
Thank you.
Is there an actual step-by-step set of instructions, various sites give differing instructions and most of them are incomplete?
nexroom said:
I want to know when you say "install ROM' exactlty what do you mean?.
Click to expand...
Click to collapse
It means that you need to install the rom.
You can compare it with this instruction:
When said Install Rom:
1. Wipe data/cache (if needed)
2. Format System partition (if needed)
3. Wipe dalvik cache (if needed)
a few steps later...
?. Install zip file from sd card.
If it's needed it's explained in the instructions or description about the room.
Regards,
Rico_515
Following Instructions
Again not very helpful as when you do a wipe, the phone reboots and that is that, no more instructions nothing. What does [I} a few steps later...[/I] mean very vague answer. Upgraded many Samsung phones using Odin, this is the first time I have tried to install a ROM and I am now using LG phone and it is not the easiest model out there, although I do prefer LG to Samsung.
So this is my first post, but whatever.
So it's safe to say I screwed up, I accidentally deleted my stock (rooted) Samsung OS. I somehow managed to download Paranoid Android 6.0.1 onto the Samsung Galaxy S3 GT-I9300 I received. I heavily dislike Paranoid Android, and I would like to give Cyanogen 14.1 a shot. The problem is since I wiped everything, every time I do a factory reset for my device, it goes into a bootloop, even if I flashed CM 14.1.
I have TWRP installed, if that helps, and all files (that I know of) are installed on my computer (Odin, CM14.1 ZIP, and Paranoid is backed up).
I'd like to thank everyone who even comes and reads this thread, and I'd be very grateful if I managed to get CM 14.1 on the Samsung Galaxy S3 GT-I9300.
Which version of TWRP is installed? If you have 2.87, try 3.02. Are you performing a full system and data wipe before installing cm14.1?
Hi bro
I am agree with the first reply to you.
All You need the official CM14.1 ROM
Download here https://download.cyanogenmod.org/?device=i9300
And then download Gapps for android 7.1 pico
Download here http://opengapps.org/
If yoy havn't twrp recovery ! Download it from here
https://dl.twrp.me/i9300/
The file end with (tar) it flashing with Odin.
And the file end with (img) it is update from other version to new with Flashify app (you can find the app in playstore free)
Now You have all requirements files
Let's flashing Your device:
Move the files to Ext.sdcard
Make sure you have 80% battery charge
Then reboot your device to (recovery mode)
Turn off your device and Push (Power+home+volume up) keys at the same time for 5 sec untill u see the recovery icon
Now go to wipe your phone choose advance wipe check the dalvilk + cache + system + data + inernal storage ,, done
Now go back and choose install
Search to your Ext.sdcard then choose the CM14.1 at the same time click on Add more zips
And choose Gapps 7.1 pico
Now swipe to flash
Wait to flash finish and then click on Reboot system
Done
Good luck
audit13 said:
Which version of TWRP is installed? If you have 2.87, try 3.02. Are you performing a full system and data wipe before installing cm14.1?
Click to expand...
Click to collapse
I'm using the latest TWRP, I made sure to install the latest one, and I'm performing a full data and system wipe before I install CM14.1. My question is does it HAVE to be on an external SD card, because I just port it over to a folder in my internal SD card.
It can be installed from the internal memory. Simplest way would be to boot into TWRP, mount storage, copy over CM and gapps, and flash.
Maybe try TWRP 2.87?
audit13 said:
It can be installed from the internal memory. Simplest way would be to boot into TWRP, mount storage, copy over CM and gapps, and flash.
Maybe try TWRP 2.87?
Click to expand...
Click to collapse
I've tried to do that multiple times, but everytime I try it, the S3 goes into a bootloop.
Due to the bootloop issue, I would flash a stock ROM with Odin, perform a factory wipe from stock recovery, and then see if the phone will boot properly.
Is the phone a gt-i9300 in download mode?
audit13 said:
Due to the bootloop issue, I would flash a stock ROM with Odin, perform a factory wipe from stock recovery, and then see if the phone will boot properly.
Is the phone a gt-i9300 in download mode?
Click to expand...
Click to collapse
Yeah, I managed to install the stock OS. I also tried to install CM14.1 again, following the instructions to the letter, but still no CM build. I have no idea what I'm doing wrong, since I've read multiple threads on XDA and the CM site.
Not exactly sure what you mean by in download mode, since I'm new to all this rooting business.
You need download mode to flash a stock ROM; otherwise, Odin can't install a stock ROM.
audit13 said:
You need download mode to flash a stock ROM; otherwise, Odin can't install a stock ROM.
Click to expand...
Click to collapse
Oh if that's the case, then yes. I put it in Odin mode to flash the stock ROM.
Okay, just to confirm but these are the major steps you took:
flashed the latest stock ROM to the phone;
flashed the latest tar version of TWRP using Odin;
booted into TWRP and copied CM14 to the internal memory or an SD card;
wipe data, system, and cache in TWRP;
flash CM14 in TWRP and rebooted.
Yup, those are the exact steps I took. I think I'm just going to tinker around with the Samsung a little longer, until I manage to brick it, or I'll just continue doing research. I'm already happy I managed to get out of a boot loop on my own, with and without OS.
Are you in Canada? Where did you get the i9300? The i747m is sold in Canada and the i747 is sold in the USA.
audit13 said:
Are you in Canada? Where did you get the i9300? The i747m is sold in Canada and the i747 is sold in the USA.
Click to expand...
Click to collapse
My dad got it for his work during his visit in Turkey, is that a factor during flashing of new OS's? What surprises me is that I could install Paranoid Android 6.0.1 onto it without an OS with little or no problem.
A pre-existing OS on the phone is not a requirement to flash a custom ROM.
As long as the ROM is for the i9300, you should be fine.
audit13 said:
A pre-existing OS on the phone is not a requirement to flash a custom ROM.
As long as the ROM is for the i9300, you should be fine.
Click to expand...
Click to collapse
I made sure it was for the i9300. I'm confused to where it doesn't work because I would see the CM battery charging logo, but when I wanted it to boot, it kept bootlooping for 10 minutes on end. The longest I've let it run was whilst I was sleeping, 8 hours, still nothing.
Maybe try a different version of CM14.1 or a different version of TWRP.
audit13 said:
Maybe try a different version of CM14.1 or a different version of TWRP.
Click to expand...
Click to collapse
I'll give those options a shot. I'll try out clockwork and see. I guess I'll keep going until I brick it. Thanks for aiding me, and enjoy having a happy new year.