I have bought this tablet from amazon and it didn’t work right from the box.
model:
Proscan PLT1077G(BT/1G/8GB)
OS:
Android 4.4.2
Processor:
1.3 GHz 8803 CORTEX A8
karnel:
3.4.67
[email protected] #13
build number:
PLT1077G 20141008
custom build version:
1412756465
I’m getting the following error msg repeatedly:
“com.android.systemui has stopped”
I followed some fixes I found online – I flushed the device’s cache and did a hard factory reset, but no luck.
I searched online but couldn’t find a custom ROM for the device (probably because it is a low budget, non-branded product), so I figured my only way out is finding some kind of a generic ROM to replace the current defective OS.
I realize that a rom that isn’t suitable for my device might cause some problems, but at the moment I’ll settle for a poorly working device rather than a not working one.
My question to you is –
Is that a feasible idea? Can anyone recommend me a rom that might work given my device’s specs?
Alternatively, does anyone know a custom rom for the device or have any other course of action I should try?
Thanks and sorry for my English.
hamingway said:
I have bought this tablet from amazon and it didn’t work right from the box.
model:
Proscan PLT1077G(BT/1G/8GB)
OS:
Android 4.4.2
Processor:
1.3 GHz 8803 CORTEX A8
karnel:
3.4.67
[email protected] #13
build number:
PLT1077G 20141008
custom build version:
1412756465
I’m getting the following error msg repeatedly:
“com.android.systemui has stopped”
I followed some fixes I found online – I flushed the device’s cache and did a hard factory reset, but no luck.
I searched online but couldn’t find a custom ROM for the device (probably because it is a low budget, non-branded product), so I figured my only way out is finding some kind of a generic ROM to replace the current defective OS.
I realize that a rom that isn’t suitable for my device might cause some problems, but at the moment I’ll settle for a poorly working device rather than a not working one.
My question to you is –
Is that a feasible idea? Can anyone recommend me a rom that might work given my device’s specs?
Alternatively, does anyone know a custom rom for the device or have any other course of action I should try?
Thanks and sorry for my English.
Click to expand...
Click to collapse
I can't seem to find any custom roms for that device, and I would NOT advise you trying to install one which isn't meant for your particular device. In the past, I've faced that problem too. I ended up fixing it with a full wipe before reinstalling the stock firmware. If you haven't tried that before, I recommend you do.
I have the same Tablet and rooted mine. I could backup my rom.
Related
Hello world.
I think this is my 2nd time here trying to find a ROM to my "useless" device.
I will pay 20$ to the man who finds me a ROM to this device. (Android ROM, with Android Visual)
I will post any information you want, I install any software you want.
Help me solving this little problem..
Long Story Short:
I have this device, I don't even use it though but i find fun to solve problems, and I've been trying to solve this one for a long time.
So, the device is an Iphone Replica (which is already a Problem) and I am trying to install a ROM into the device (smth like CM, KK, anything ) but with no success. The device is Rooted as expected... So I installed already a few software to be able to see what the system is like ..
(an the system itself sucks a lot haha)
I am not doing this for money, I am doing this cause I like challenges ..
Hardware Info:
Model: Phonei5
Manuacturer: alps
Device: K13D
Product: K13D
Brand: Phonei5
Android Version: 4.0.2 GBread
API Level: 10
Build ID: GRK39F
Display: 800x480
Processor: ARMv7 Processor rev 10(v71)
I think that would be all, let the games beggin
I could really use a hand here everyone
nobodykr said:
Hello world.
I think this is my 2nd time here trying to find a ROM to my "useless" device.
I will pay 20$ to the man who finds me a ROM to this device. (Android ROM, with Android Visual)
I will post any information you want, I install any software you want.
Help me solving this little problem..
Long Story Short:
I have this device, I don't even use it though but i find fun to solve problems, and I've been trying to solve this one for a long time.
So, the device is an Iphone Replica (which is already a Problem) and I am trying to install a ROM into the device (smth like CM, KK, anything ) but with no success. The device is Rooted as expected... So I installed already a few software to be able to see what the system is like ..
(an the system itself sucks a lot haha)
I am not doing this for money, I am doing this cause I like challenges ..
Hardware Info:
Model: Phonei5
Manuacturer: alps
Device: K13D
Product: K13D
Brand: Phonei5
Android Version: 4.0.2 GBread
API Level: 10
Build ID: GRK39F
Display: 800x480
Processor: ARMv7 Processor rev 10(v71)
I think that would be all, let the games beggin
I could really use a hand here everyone
Click to expand...
Click to collapse
Maybe you can try this one HERE
But sadly you need to register to the site to download it
The site name is NEEDROM lol!!!
Well then,
I can asure you I already been there, and done that.
That is an Oficial Rom from that manufacturer, What i am looking for is a Android Looking ROM, not that "fake look" of Iphone IOS 5/6
If you know what i mean.
Will I have to work and make my own ?
Because its not even worth it with so many phones at low cost with QuadCore Processors and decent ROMS and Kernels.
Hello, and thanks to all who take the time to read this and offer their support.
To everyone else... just hello.
Okay.
I have a few of those cheap Chinese 7" tablets so common on e-Bay these days. For the price, most of these are okay and seem to run fairly well "as-is" without having to spend a lot of time rooting them or installing CFW. This one however is just a little bit different.
Here's the deal... The tablet I'm going to be addressing in this thread has a ROM that was not customized for the retailer very well. The particular combination of apps and services it has causes the tablet to perform horribly. I'd really like to change this. The problem is however that because there are so many of these around these days, many of these generic units have not been "developed." Because of this, rooting these devices or replacing the ROM's is often very difficult if not downright impossible. At times, even identifying the specifics of the hardware. This tablet is one of those.
I've tried just about everything I can think of to simply modify the ROM it has in a way that would make it work better, but there are a few apps installed that are locked and impossible to modify or remove. I've come to the conclusion at this point that if possible, installing a custom ROM is going to be the only way to "fix" it. I have been able to root the device, but I have not been able to replace the recovery app , nor have I been able to identify a ROM that might be able to be installed once I do.
What I need from you folks.
If I supply every scrap of information I can come up with about this tablet, would someone please be willing to tell me which ROM just might work, and how I can use the recovery app that's installed to install it? If so, thank you.
Here's the information.
Options available in the installed recovery app.
A. Apply update from ADB
B. Apply update from external storage.
C. Apply update from cache.
Here's the tablet information.
Brand: ZTO
Model: N1 PLUS (Generic Chinese 7" tablet)
Android version: 4.1.1
Baseband version: v0.4rc3
Kernal version: 3.0.8+
Build number: N1 PLUS_wifi-7601_V4.1.1 JR003C 20131202
And again, Thank you.
Got rebranded android device - Need to figure out if there is a custom ROM I can load
Fair warning - I'm an android noob.
I'm have a rebranded android phone and I'm trying to find alternate ROM's for it.
The phone has the following specs:
Brand: AG Mobile
Model: AG Chrome Swift
Operating System: Android 4.4.2
Display 4.5" FWVGA
Memory 4G+512MB
CPU 1.2G Dualcore
Manufacturer refuses to release their ROM's, updates are non-existent. I'm hoping this is simply a re-branded HTC or something similar that I could an alternate ROM on.
When I used the APK Installer detector app it picked it up as:
Manufacturer: HTC
Description: YunOS ACB Interface
Any assistance to figure this out will be greatly appreciated.
It is a knock off device. You are out of luck to be honest. No one develops for knock off device.
Thanks man - possibly not the right forum for this: Is it possible to get a ROM off a working model to re-flash another?
Would solve at least one of my headaches here (and thanks in advance for any help!)
No because you will need a custom recovery to flash it.
Apparently, i bricked this device without backing up any roms, so now im stranded as i cant find any compatible roms online.
This device is quite similar to chuwi hi9 air, same build number and specs, just that this device has higher rams and is at android 10.1
Build number: O00623
Custom Built: alps-mp-o0.mp1
It runs on MT6797 X20 Helios, 2560×1600, Android 10.1
Is there anyone that can help out with my situation or perhaps any workarounds? Great appreciated!
oumura said:
Apparently, i bricked this device without backing up any roms, so now im stranded as i cant find any compatible roms online.
This device is quite similar to chuwi hi9 air, same build number and specs, just that this device has higher rams and is at android 10.1
Build number: O00623
Custom Built: alps-mp-o0.mp1
It runs on MT6797 X20 Helios, 2560×1600, Android 10.1
Is there anyone that can help out with my situation or perhaps any workarounds? Great appreciated!
Click to expand...
Click to collapse
I'm gonna be honest this is very unlikely that you'll ever find that. That's one of the reasons I don't recommend buying those no-name chinese tablet.
well i’m just gonna purchase another of this tablet for my dad and back up the rom so i can reflash it on this device
Any tablet can be a bargain, but if it's a faked it usually isn't.
See the proinfo partition ~ 0x200 if there is some text there.
You might be able pull it with SPFlash or similar.
fpl= tells the faked cpu - the next/last one is the real chip...
oumura said:
Apparently, i bricked this device without backing up any roms, so now im stranded as i cant find any compatible roms online.
This device is quite similar to chuwi hi9 air, same build number and specs, just that this device has higher rams and is at android 10.1
Build number: O00623
Custom Built: alps-mp-o0.mp1
It runs on MT6797 X20 Helios, 2560×1600, Android 10.1
Is there anyone that can help out with my situation or perhaps any workarounds? Great appreciated!
Click to expand...
Click to collapse
Stock ROM & How-to-flash it here.
This is probably a long shot but I'll try....
We're rolling out some bedside entertainment tablets but they arrived from China (ELC) with Android 7.1.2. We need them running at least Android 11. We've reached out to the vendor that sold them and have been getting the run around for months. They tell us it's possible but they're waiting on ELC to provide the update. I've gone to ELC directly as well but nothing there either.
Since these are based on a RockChip 3399 chip (I have root and an unlocked bootloader) is it possible to upgrade these on my own with a stock image? I honestly have no idea if this can be done but figured I would try here for any input. We're really having a hard time with both companies...
Thanks for any help!
To clarify things: Stock ROM is the ROM that comes with device when getting released / shipped. You've to flash a suitable Custom ROM by means of a matching Custom Recovery in order to ugrade current device's Android.
Did you ever find a suitable custom ROM? I have no idea how to ‘match custom rom recovery’. Everywhere I look seems to talk about radio units. I have a tablet too and it has NO discernible device name or model that is recognisable .. tried to download a rom or two and they don’t finish pushing through ADB so I’m assuming I need the right ROM..