Hello everybody, I have probably made some mistakes trying to install Marshmallow on my Z2 and now it is stuck on boot (It turns on it boots until the blue wave wallpaper then it starts again). I cannot access recovery and I can't get Flashtools working (it never shows me the prompt where it tells you to connect the phone), I don't know what I'm doing wrong since it has worked for me before. I desperately need to get access to the files inside the internal memory and recover them somehow. If someone can help i would be greatful. Thank you
if the screen is on, lit the boot button press volume + and hold for a few seconds he will vibrate 3 times ... and release it'll be off after that and so open the flashtolls, select the rom and mobile in order flasmode and flashed the rom
Related
Yesterday I rooted my LG Optimus L9 using LGpwn tool, after that it worked just fine.
This morning I tried to install ClockworkMod Recovery. Using this post. It explains how to download and install CWM Recovery from app that you downloaded in form of APK.
This method did not work 100%, but I was able to reboot normally, so in post it said that sometimes it does not work and you need to download and use Busybox installer Link to busyboxx.
After this I managed to boot in too CWM using app from mentioned thread.
Then problem occurred. After I saw CWM was working I selected reboot device option.
Except now when it started to boot it stops right after Second LG logo (First is static one second one is animated).
I get white screen with "Encrypting" on top and gray line. And one Reset Phone button. IMG they are Dropbox links.
This is followed with Error : Unfortunately, the process com.android.phone has stopped. IMG
I am able to boot in too CWM and I have tried flashing something like Cyanogenmod but I get error Status 7. Tried removing line that checks model, no use.
Tried clearing every cache and fixing permissions, nothing. Formatted everything still no use.
Dear XDA community That you in advance.
I fixed my phone by going into SW upgrade mode, and using the Upgrade Recovery function of the LG Software Update tool or whatever. Be sure you don't have any http servers open
Sent from my LG-P769 using XDA Premium 4 mobile app
I got the same problem, but when I try to access to SW mode and connect to LG Software Update tool to restore my phone, the phone keep disconnect and the phone screen will turn off, so I fail to restore my phone, I have already re-install the USB driver and changed a several USB cable but the problem still, but I tried to restore my phone with SW upgrade method since last night and is was OK, can anyone help me?
---------------------------------------------------------------------------
The Problem Solve Finally, the solution is I plug the battery back to the phone after access to LGMobile Support Tool, and after finish the restore process, the phone will restart but keep boot loop, then I perform the hard reset (Remove the Battery and insert it after few seconds. And now do the 3 button HARD RESET. First press VOLUMEDOWN and HOMEbutton. Then Press Power button only for 3 seconds and release power button but dont release VolDown and Home button and KEEP BOTH PRESSING until you see a Bigger Green Standing Android and circulating Molecular structure above it. DONE! ), then the phone begin work~~~
pigmich said:
I got the same problem, but when I try to access to SW mode and connect to LG Software Update tool to restore my phone, the phone keep disconnect and the phone screen will turn off, so I fail to restore my phone, I have already re-install the USB driver and changed a several USB cable but the problem still, but I tried to restore my phone with SW upgrade method since last night and is was OK, can anyone help me?
---------------------------------------------------------------------------
The Problem Solve Finally, the solution is I plug the battery back to the phone after access to LGMobile Support Tool, and after finish the restore process, the phone will restart but keep boot loop, then I perform the hard reset (Remove the Battery and insert it after few seconds. And now do the 3 button HARD RESET. First press VOLUMEDOWN and HOMEbutton. Then Press Power button only for 3 seconds and release power button but dont release VolDown and Home button and KEEP BOTH PRESSING until you see a Bigger Green Standing Android and circulating Molecular structure above it. DONE! ), then the phone begin work~~~
Click to expand...
Click to collapse
I had this problem too...
You can also try, start upgrade tool, Remove battery -> press volume up + insert usb with upgrade tool open, it will detect, insert battery then go to extras and click upgrade-foutherstel (is in dutch for me)
Then it will all work, I can't even install a custom rom My bootloader is unlocked, rooted phone, installed recovery, see my thread about the error I get!! please!
help lg p768 encrypting error problem
can someone help me please.
i have the same problem from the starter of this thread..
installed recovery apk and goes to encrypting error.
i dont know what to do and how to begin to solve my phone problem.
thanks
Hi,
I have phone Lenovo S820 (mt6572) and I have huge problem.
After I bought it, it work within 4 hours. Next it restart itself and stopped on Lenovo logo.
I tried factory reset and nothing happened. I enter Chinese menu, click on one option and from now on it stopped on Android logo, of course it didn’t turn on. Still it doesn’t work. (With SIM card, without it, SD card ect).
Moreover, I tried to install new software. I found and install by Flash tool Lenovo S820 copy mt6572 Multilanguage RoM from needrom BUT, I push Firmware->Upgrade button instead of download. From that moment in general it doesn’t start at all.
My computer see it as MKT USB Port.
I don’t have backup (or it doesn’t work), cause I didn’t create it earlier.
Pls help, because I have new phone and I can’t use it
Thx
It might be a softbrick or bootloop
Hi the softbrick doesn't do as much harm as a brick (brick meens it can't be fixed and it has the value of a brick nothing)a softbrick you can fix by having a micro SDcard (or normal if your phone uses that) format it and make it a ''bootableSDcard'' (see a video on YouTube) then get a customrom and put it on your card place it inn it's place in the phone and turn it on it should bring you to a image of a android with open belly under its a progress bar when it's finished your device will restart and boot up as new
Unfortunately, my phone, didn't react to keys combination (power + vol up, or down)
Battery charded all night, but I don't know if it is full.
klejoo said:
Unfortunately, my phone, didn't react to keys combination (power + vol up, or down)
Battery charded all night, but I don't know if it is full.
Click to expand...
Click to collapse
hey, could you please tell me how did you resolve your problem?
i happen to be in the same situation.
Hello to all,I am in a serious trouble with my samsung galaxy player 5.0 International China version . I rooted this with super one click.And it was successful and there was no problem.But as soon as I overwrote a file in lib folder of system,it got stuck.I tapped the power key and the screens light was gone.I again tapped but there was no response.So I held the power key for a while and the device restarted.But it got stuck on samsung logo and began to restart again and again.So I took it to download mode and tried to nand erase with odin,I thought it could format the device and my device would be fixed.But it took some time and I closed odin.Then I held the power key and it restarted with a black screen containing a picture of malfunctioning connection between a phone and computer at its middle.Then I again tried to t-flash it and again closed it without completion because my notebook had no charge.After that I flashed my device with the YP-G70-Kernel-r14 and it restarted with download mode.But if I hold the power key for a while it restart and again go to the brick showing screen(I heard that this brick is called soft brick).I downloaded two stock rom STOCK_G70XXKPH_G70XXKPH_XEF and G70XXKPL_G70XXKPL_XEF.I tried to flash them in my device with odin and they succeeded.But none of them could fix my problem.They remain in download mode and if I hold the power key the device again go to the soft bricked screen.My device isn't force shutting down.If I hold the power key the screen goes and again lights up with the bricked screen.Now,my device has become very hot and after 8-9 hours it has automatically turned off.But if I connect it to the charger it again lighten up with bricked screen.
Now,I am wanting to setup a clean and clear version of android 2.2/2.3.6 in my device.Is it possible?Will this fix my problem?If it does then please explain me the steps.Or if there is any other way to fix then please help me.
N.B. I am junior about andorid root,rom etc.It is the first device I rooted successfully.
Sorry for my bad and wrong English.
Please,help.I am in a bad danger.
BFahim said:
Hello to all,I am in a serious trouble with my samsung galaxy player 5.0 International China version . I rooted this with super one click.And it was successful and there was no problem.But as soon as I overwrote a file in lib folder of system,it got stuck.I tapped the power key and the screens light was gone.I again tapped but there was no response.So I held the power key for a while and the device restarted.But it got stuck on samsung logo and began to restart again and again.So I took it to download mode and tried to nand erase with odin,I thought it could format the device and my device would be fixed.But it took some time and I closed odin.Then I held the power key and it restarted with a black screen containing a picture of malfunctioning connection between a phone and computer at its middle.Then I again tried to t-flash it and again closed it without completion because my notebook had no charge.After that I flashed my device with the YP-G70-Kernel-r14 and it restarted with download mode.But if I hold the power key for a while it restart and again go to the brick showing screen(I heard that this brick is called soft brick).I downloaded two stock rom STOCK_G70XXKPH_G70XXKPH_XEF and G70XXKPL_G70XXKPL_XEF.I tried to flash them in my device with odin and they succeeded.But none of them could fix my problem.They remain in download mode and if I hold the power key the device again go to the soft bricked screen.My device isn't force shutting down.If I hold the power key the screen goes and again lights up with the bricked screen.Now,my device has become very hot and after 8-9 hours it has automatically turned off.But if I connect it to the charger it again lighten up with bricked screen.
Now,I am wanting to setup a clean and clear version of android 2.2/2.3.6 in my device.Is it possible?Will this fix my problem?If it does then please explain me the steps.Or if there is any other way to fix then please help me.
N.B. I am junior about andorid root,rom etc.It is the first device I rooted successfully.
Sorry for my bad and wrong English.
Please,help.I am in a bad danger.
Click to expand...
Click to collapse
remove your battery and wait 20 seconds plug in your charger without battery wait for 30 seconds then plug out charger then put your battery battery back then charge it try to turn it on
hope it helps
BFahim said:
Hello to all,I am in a serious trouble with my samsung galaxy player 5.0 International China version . I rooted this with super one click.And it was successful and there was no problem.But as soon as I overwrote a file in lib folder of system,it got stuck.I tapped the power key and the screens light was gone.I again tapped but there was no response.So I held the power key for a while and the device restarted.But it got stuck on samsung logo and began to restart again and again.So I took it to download mode and tried to nand erase with odin,I thought it could format the device and my device would be fixed.But it took some time and I closed odin.Then I held the power key and it restarted with a black screen containing a picture of malfunctioning connection between a phone and computer at its middle.Then I again tried to t-flash it and again closed it without completion because my notebook had no charge.After that I flashed my device with the YP-G70-Kernel-r14 and it restarted with download mode.But if I hold the power key for a while it restart and again go to the brick showing screen(I heard that this brick is called soft brick).I downloaded two stock rom STOCK_G70XXKPH_G70XXKPH_XEF and G70XXKPL_G70XXKPL_XEF.I tried to flash them in my device with odin and they succeeded.But none of them could fix my problem.They remain in download mode and if I hold the power key the device again go to the soft bricked screen.My device isn't force shutting down.If I hold the power key the screen goes and again lights up with the bricked screen.Now,my device has become very hot and after 8-9 hours it has automatically turned off.But if I connect it to the charger it again lighten up with bricked screen.
Now,I am wanting to setup a clean and clear version of android 2.2/2.3.6 in my device.Is it possible?Will this fix my problem?If it does then please explain me the steps.Or if there is any other way to fix then please help me.
N.B. I am junior about andorid root,rom etc.It is the first device I rooted successfully.
Sorry for my bad and wrong English.
Please,help.I am in a bad danger.
Click to expand...
Click to collapse
I don't have a samsung device myself but if you can get in download mode and you can from what you described. What happened is that you deleted a driver (from the lib folder) that was necessary for boot (something important). To get to stock go here http://forum.xda-developers.com/showthread.php?t=2192488 download the right Firmware for your device. And the right pit file (pit file is the partition layout of the device). Flash using the pit file you got. You will fix that. Good luck.
Stock rom and pit file downloaded
cedie said:
remove your battery and wait 20 seconds plug in your charger without battery wait for 30 seconds then plug out charger then put your battery battery back then charge it try to turn it on
hope it helps
Click to expand...
Click to collapse
So,I am in the download mode.I downloaded the firmware (XXXKPL) and the intl pit file.Now what options would be checked in odin and where will I put the firmware file(PDA or Bootloader)?The device has no charge.If I connect to the charger,it wakes up and becomes very hot than normal.And I can't turn it off.Its battery is non-removable.Thank you for your valuable help.
Hello and thank you for anyone bothering to read this.
I got a CAT S50 and was experiencing a bit of instability lately.
I've run LTE_S0201121.0_S50_0.023.00 without a hitch for a while, then it decided to crash several applications, from google play to any other app open.
That's when I decided to do a factory reset and see if it would help. Performed the rest without a hitch, but the errors kept coming back. At one point, the screen went black. I knew the phone was on because the backlit was working. I hard-reseted it (hold the power button for 30 seconds or more) and rebooted. The phone froze on the CAT splash logo screen and that's when I hard-reset it again. But when I tried to turn it on, the phone simply refused to work. No vibrate, sounds or anything. It's dead.
When I plug it on the computer's USB, the PC makes a sound as if it detected the device, but when I go to the device manager, I get this QHSUSB_BULK with the yellow exclamation mark
I want to know if it is possible to unbrick this phone and if so, if there is a tutorial or if someone can direct me to the correct procedure. I looked everywhere for the ftf file for this phone to attempt this with flashtool, but I simply can't find it.
ANY help of any form is greatly appreciated.
Sadly I had the same thing happen to me, just a black screen. It decided to delete recovery mode or I just cant get to it.
Power Off the Phone,
While pressing Press Vol Down + Cam Button insert a Powersource -- hold down Vol Down + Cam
Recoverymenu should start
Then flash the original rom via ADB Sideload or SD Card.
btw. i have flashed the LTE_S0201121.0_S50_0.023.00 but i want test older ROMs!
can anyone link or upload an older ROM ?
Guy i have the same issue, can you please help me
I got the same problem I search lots place but still nothing then normal update rom anyone can help?
Hi everyone,
Looking for some help on my phone which is the only one I have unfortunately
So basically the Honor 9 is showing only the logo then just a black screen. One time it vibrated afterwards when pressing the volume buttons and made the camera sound. So it seems it might have booted but nothing is showing?
Phone did fall before, but worked afterwards.
I cannot access Emui recovery (when pressing volume up+power, it just shows the logo and black screen), but I can access fastboot.
If I plug it to charge, it shows the charging logo fine.
Bootloader is not unlocked. Nothing custom has been installed.
I already tried Hisuite recovery mode, but it said the device is not supported.
Any advice on what I could try? I searched the forums but couldn't figure out what to do. Any suggestion would be much appreciated.
Thank you!
bleepop said:
Hi everyone,
Looking for some help on my phone which is the only one I have unfortunately
So basically the Honor 9 is showing only the logo then just a black screen. One time it vibrated afterwards when pressing the volume buttons and made the camera sound. So it seems it might have booted but nothing is showing?
Phone did fall before, but worked afterwards.
I cannot access Emui recovery (when pressing volume up+power, it just shows the logo and black screen), but I can access fastboot.
If I plug it to charge, it shows the charging logo fine.
Bootloader is not unlocked. Nothing custom has been installed.
I already tried Hisuite recovery mode, but it said the device is not supported.
Any advice on what I could try? I searched the forums but couldn't figure out what to do. Any suggestion would be much appreciated.
Thank you!
Click to expand...
Click to collapse
Hello.
I know it is close to a year now, but just in case there is someone else out there looking to solve something like this. Just make sure to have a wifi connection through which you can download your firmware and recovery through the eRecovery panel. The downloads should be around a total of 4GB, so bear that in mind.
When you are set with your wifi access do the following (feedback will be appreciated):
- plug your phone to your computer and hold down the vol up + power button to boot into eRecovery
- in the eRecovery panel, choose to download firmware and recovery and it will launch a wifi connection
- connect to your wifi
- download the firmware and recovery accordingly
- once completed, you can proceed to update/upgrade (basically to install) it via the eRecovery
- once the upgrade/update/installations are complete, you can reboot.
- just know that everything on your device will be lost - full system and sdcard wipe will be made.
I hope you find the above helpful for you.