Related
http://www.amazon.com/Optimus-E970-HYBRID-Silicone-Black/dp/B00ATIEB4E/ref=cm_cmu_pg__header
This is a pretty decent hybrid case. I uploaded a few pictures to Amazon to give more people a better chance to see what it looks like since the seller only uploaded a picture of the back, and I have the only review on Amazon as well if you want to hear what I thought about it. Basically, it's a good fit but I'm not the biggest fan of how it feels in my hand and how much thickness it adds. I honestly feel like they could have made the silicone thinner where it's covered by hard plastic and reduced the overall thickness by a lot. It's not the end of the world, but we'll see how long I have it on there before I take if off and go all slim-n-sexy again.
Also, for whatever reason Amazon didn't like my picture of the packaging so I'm attaching a picture of the mailer it comes in and the packaging you have to open. It's pretty standard stuff, but it's here for you to look at just in case.
Edit: Typo.
How do the buttons feel?
They are a little bit cheaper if you order from
eBay Seller: hc-power --- Multiple Colors and Hybrid Designs
http://www.ebay.com/sch/m.html?_odk...046732.m570.l1313&_nkw=e970+silicone&_sacat=0
This is the case I decised on too. I works, very light, but I'm not sure how much protection it offers. Coming from a Seidio Active case on an iPhone 4, this is a let down, but there aren't many choices. I'd rate it a 6 overall
KarlP said:
This is the case I decised on too. I works, very light, but I'm not sure how much protection it offers. Coming from a Seidio Active case on an iPhone 4, this is a let down, but there aren't many choices. I'd rate it a 6 overall
Click to expand...
Click to collapse
Agreed - But there's not much case love for the AT&T OG so we're at the mercy of this type of case unless Seidio or Otterbox or such changes their mind about making something for us.
I got this case off eBay, just received it yesterday. For a case being under $10 its not bad and I feel it will protect it from a mild drop just fine. Also the silicone on the front has a raised lip so if you set the phone face down its not on the screen. The only real down side is that the case covers the power button so no notification light now.
I'll add pictures of mine, since its blue might be easier to see then the black case.
Sent From My LG Optimus
How does the case feel?
I purchased the one from Ventev that looks identical to this case. I sent that one back because the "TPU" it said the case was made of was really hard kinda felt like plastic. That made the buttons hard to push. Is the rubber the case made out of hard or soft like tradition TPU? I want this case because I like the two layers of protection but I dont want another case that was like the Ventev case. For now I have the Diztronic case on it and I took the plastic shell off the Belkin case and it fit over the Diztronic TPU case with little force and its like a makeshift Otterbox Commuter.
REDFOCZ said:
I got this case off eBay, just received it yesterday. For a case being under $10 its not bad and I feel it will protect it from a mild drop just fine. Also the silicone on the front has a raised lip so if you set the phone face down its not on the screen. The only real down side is that the case covers the power button so no notification light now.
I'll add pictures of mine, since its blue might be easier to see then the black case.
View attachment 1641419
View attachment 1641420
Sent From My LG Optimus
Click to expand...
Click to collapse
I just replaced mine with the Fusion Hybrid, I like it much better...
After only like 2 weeks, the "silicone" was stretching. It's actually more like a molded foam, and the plastic hard shell only holds it to the phone in a few areas. The plastic shell on the Fusion Hybrid actually seems to be a lot more stiff and holds it on three sides. The silicone feels a lot better on the new case as well, seems more dense...
For less than $10, neither is terrible, but I'd spend on the Fusion Hybrid...
I do not usually put my phone in a case because I do not like to add bulk. I like to keep it as slim and trip as possible. I am coming from a prior phone that had a rubberized surface on the edges and back (Droid MAXX - the original). The Pixel is a bit slippery for me.
I am curious what solutions people would recommend for the best way to add grip to the Pixel without adding bulk. Maybe I need to go with one of the thin cases, or maybe there is a skin that could help? I don't need to decorate the phone, but if there is a skin that helps it grip better I would give it a try.
Your options are case, skin, and naked. For cases, you're not going to get any thinner than the Nillkin Nature cases. I'm not a fan of the one I have but it's undeniably low in bulk. For skins, the are a ton of options and you'll have a variety of opinions but if you don't want a case, that's about your best option.
Some skins are grippier than others, even win a single manufacturer, so it's worth asking the manufacturer about it. For example, for dBrand their grippier skins tend to be the carbon fiber options.
Good luck!
I've said this in the other cases thread on here, but I'll post again just in case people don't know about that other thread.
Caudabe (http://www.caudabe.com) makes great, very slim cases for iPhones.
If you email/tweet them to make Veil XT for Google Pixel/Pixel XL, they might consider it.
You can try reaching out to Shumuri too (http://shumuri.com)
I wish that their was an antigravity case for the pixel... I can't stand mounts and would love to just stick my phone to my instrument panel
Based on my experience with them on other phones, a skin won't provide anywhere near as much grip as the surface on that Droid Maxx.
Instead, take a look at the thread on ultra-thin cases:
http://forum.xda-developers.com/pixel/accessories/ultra-case-t3483579
The Nillkin Nature cases are very slim and definitely add grip to the phone. You can see pics in my post here:
http://forum.xda-developers.com/pixel/accessories/pixel-t3475315/post69764947#post69764947
Google Pixel (XL) Matte Black Skin Premium Quality SAMSUNG 3M Scotchprint 1080
http://www.ebay.com/itm/291970270753?var=590965880055
You can't go wrong with the UAG cases. The plasma series is surprisingly thin and light, but really has great edge and drop protection. they feel great in the hand. They are a little higher in price, but totally worth it.
https://urbanarmorgear.com/collections/type-plasma-series/products/plasma-series-google-pixel
I had one for my Note 5 and then S7, and I'm will be picking up another for my Pixel.
Sent from my Pixel using Tapatalk
Metalsauce said:
You can't go wrong with the UAG cases.
Click to expand...
Click to collapse
+1. I received the Ice case yesterday; using it on the silver Pixel. I wanted a slim grippy case, one with black rubber to hide the darkening that occurs with time on rubbery areas of phone cases, and a clear back to display the silver/white of the phone. This case is PERFECT. It looks great. And the grip is fantastic.
I just received a blue Speck Presidio Grip and it's a very nice case for adding grip. The blue one is hard to find unless you pay quite a bit of $$ (I found a listing on eBay for used under $20) but the black version can more easily be found for under $20.
The case fits very well without being too difficult to take on and off. The added grip is good without being extreme. The hard plastic has a nice matte feel to it (the previous Speck cases I had was glossy but I like this better). And the buttons have a good clicky feel to them. It's not a minimalistic case like the Nillkin Nature but it's tons better than something like the Incipio Dual Pro.
Hope this helps somebody!
I've been meaning to try the DBrand skins for a while. Just ordered the bamboo version for my silver Pixel. Will update how it is. I have high hopes as the reviews are overwhelmingly positive.
Sent from my Pixel
kkh786 said:
I've been meaning to try the DBrand skins for a while. Just ordered the bamboo version for my silver Pixel. Will update how it is. I have high hopes as the reviews are overwhelmingly positive.
Click to expand...
Click to collapse
They are very good skins! Do yourself a favor and be sure to use their videos for installation, don't skip steps, and give yourself plenty of time.
Just installed the bamboo skin. Looks good. Not perfect installation as am not patient enough. Haha.
Sent from my Pixel
I'm getting a Slickwrap skin. I've been using dbrand for a while now... Just want to try something different.
I've purchased two Toast skins now and I really like them. Because they are actual wood they are really nice and grippy with the added benefit of that if you drop your phone, the wood will absorb some of the shock. It's prevented a few dings for me. Plus they can laser etch anything you want on there...
josephpalozzi said:
I've purchased two Toast skins now and I really like them. Because they are actual wood they are really nice and grippy with the added benefit of that if you drop your phone, the wood will absorb some of the shock. It's prevented a few dings for me. Plus they can laser etch anything you want on there...
Click to expand...
Click to collapse
I've had Toast on phones and laptops. Great products although I prefer them on non-phone devices because it's impossible to put a case over top of it and sometimes you just need heavy duty protection.
grippy case
Hi
I got this within 10 days of ordering - very cheap - but it really adds grip and hardly any bulk
https://www.aliexpress.com/item/Bla...nti-slip-soft-case-cover-for/32774241635.html
Pictures on the site are accurate
Jools
snowdej said:
Hi
I got this within 10 days of ordering - very cheap - but it really adds grip and hardly any bulk
https://www.aliexpress.com/item/Bla...nti-slip-soft-case-cover-for/32774241635.html
Pictures on the site are accurate
Jools
Click to expand...
Click to collapse
Looks good. Could you post some actual real life photos with the phone in it?
kEvinErd said:
Looks good. Could you post some actual real life photos with the phone in it?
Click to expand...
Click to collapse
Hi
https://goo.gl/photos/H2qcY2ECW1AcxEfEA
I have a best skins ever fitted with the glossy screen and matte body.
Also I have a qi receiver. You can see the USB port blocked by it
The buttons are cut outs so are quite recessed. I had a spigen case on just before that covers the buttons
This case is much less bulky than the spigen
The headphone port is possibly slightly wrong. If you have a headphone socket with a bulky top it might struggle. This is being picky though and I could just get a scalpel to it to increase the hole a mm
Jools
devilsadidas said:
I wish that their was an antigravity case for the pixel... I can't stand mounts and would love to just stick my phone to my instrument panel
Click to expand...
Click to collapse
There is the anitgravity space:https://megatinycorp.com/products/anti-gravity-space
This basically just sticks on to any case
What's the absolute grippiest solution for this phone? Most skins don't give a lot of confidence. Egrips doesn't make something for our phone and those rings or popsockets are huge
These sandstone cases are the solution http://www.ebay.com/itm/MSVII-Slim-...hash=item33bedfb626:m:mkaiNfq5LXgpPGOyD4m0Sbg
Go to the patchworks website. I can't post the link because i don't have 10 posts but i already have a spigen neo hybrid which is slippery but i kept because i like the color. The patchworks case has a slim and just a regular case but both have special grip on the side where you hold the phone.
i just got the alcantara case and it's by far the grippiest case ive used on any phone.
You could also try a bumper as well. Adds minimal bulk (also won't hide the color of your phone) and will add some grip too. I've heard of bumpers for the iPhone, but didn't realize there were ones for Android phones as well, haha. XD Erika Griffin mentioned one when she did her S8 unboxing on her Youtube channel -- the RhinoShield CrashGuard Bumper Case. I couldn't find it on Amazon, but I included the link to their official site.
FluxionFluff said:
You could also try a bumper as well. Adds minimal bulk (also won't hide the color of your phone) and will add some grip too. I've heard of bumpers for the iPhone, but didn't realize there were ones for Android phones as well, haha. XD Erika Griffin mentioned one when she did her S8 unboxing on her Youtube channel -- the RhinoShield CrashGuard Bumper Case. I couldn't find it on Amazon, but I included the link to their official site.
Click to expand...
Click to collapse
Thanks. Bumpers unfortunately are too big. They add a lot of width to the phone which is already extremely big one handed
km8j said:
Thanks. Bumpers unfortunately are too big. They add a lot of width to the phone which is already extremely big one handed
Click to expand...
Click to collapse
That sucks. D: Only other thing I can think of would be to try something like the Spigen Thin Fit or Airskin cases as they're about the thinnest cases you can get.
EDIT TO ADD: Almost forgot the Spigen Liquid Air case, which of the ones I mentioned, I actually own this one. The pattern on it seems grippy, but I have to see how it feels in-hand when I get the device.
FluxionFluff said:
That sucks. D: Only other thing I can think of would be to try something like the Spigen Thin Fit or Airskin cases as they're about the thinnest cases you can get.
EDIT TO ADD: Almost forgot the Spigen Liquid Air case, which of the ones I mentioned, I actually own this one. The pattern on it seems grippy, but I have to see how it feels in-hand when I get the device.
Click to expand...
Click to collapse
Ya I have a couple like the air skin that are super thin. Just wish there was something thin that was really grippy. Might Plasti dip a case....
neotekz said:
i just got the alcantara case and it's by far the grippiest case ive used on any phone.
Click to expand...
Click to collapse
it adds a lot of grip if you "squeeze" the phone, but not that much when placed on a slope.
I got this one and it seems grippy enough to me!
https://www.amazon.com/gp/product/B06XP6KZKC/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
The speck pseudo grip is pretty decent. Pricey though.
I bought the Spigen Slim Armor / Metal Slate case for mine and it's a nice, tight fit. Feels great in the hand. Edges have a rubberish feel to them but don't add allot of bulk. Now the trick will be in finding a screen protector that will work with. Like I said, TIGHT!
My solution was the honeycomb skin from slick wraps. I've used it on my last 2 phones.
I agree with pieman13, I got a dbrand skin for my S6. Protects the glass from stuff wedging between the case and the back and is the right grip
Double post.
Ordered the new black dragon... Let's see
shoot a load of jizz right to the back of your phone. it'll stay sticky and grippy, as a bonus no one else will want to mess with your phone.
I bought this case because it looked super thin. I know this is for the S8+ (this regular s8 forum is more active ), and it's awesome. It definitely is super thin, so it won't add much in terms of protection, but it has an amazing feel. Very grippy in the hand, and even on slanted surfaces. I love the feel it adds to the phone, and the size is perfect. The white specs are more pronounced in the pictures on Amazon than they are in person, they are still noticeable but not "sparkly" looking like they appear on the pictures online.
ie=UTF8&psc=1https://www.amazon.com/gp/product/B06XS3F19Q/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
peachpuff said:
These sandstone cases are the solution http://www.ebay.com/itm/MSVII-Slim-...hash=item33bedfb626:m:mkaiNfq5LXgpPGOyD4m0Sbg
Click to expand...
Click to collapse
Ordered one to see how it comapres to my Nillkin case I just got (review up in accessories)
https://forum.xda-developers.com/galaxy-s8/accessories/best-slim-case-ive-t3597761
Holy crap, the Sandstone case posted by @peachpuff is AMAZING
Super thin and the texture is awesome.
It's even thinner than the Nillken which is hard to believe
Only issue is it DOES NOT have enough of a lip on the front to lift the screen off a flat surface if laid screen down. Not a huge detractor for me as I never have my phone screen down.
Disclaimer : I do not benefit in any way for saying anything good or bad about these products. I am giving you guys my honest opinion on these cases to help provide some assistance on buying a case.
Let’s start with the first case I bought from them.
Orzly Flexicase (Clear)
Link to the case: https://www.amazon.co.uk/dp/B072MZCQB6/ref=cm_sw_r_cp_dp_T1_v8mFzb704M66R
Price :£12.99
Things I like: Simple case, adds much need grip to the OnePlus5. Doesn't detract from the overall phones aesthetic or feel. , Good lip around the camera bump and the front.
Things of concern: It's a simple case, it's mainly there to prevent scratches. Not going to protect your phone from anything major
Comments: I really like this case, there is a craft to a making something simple and effective and this is it. No fancy features it just protects your phone from scratches, adds grip and protects from small drops. It doesn't over stay it's welcome and I congratulate on that.
I was happy with my purchase at the price I paid but since it has gone down. I think anyone wanting a simple case you can't really go wrong with this.
Also like to note, I haven't had problems with any holes in the case. Some people on other forums have asked me about the quality of the finish. No evident problems with the finish of my case.
Photos: http://imgur.com/a/c8eOF
Orzly Wallet Case (Black)
Link to the case : https://www.amazon.co.uk/dp/B072QV1VRT/ref=cm_sw_r_cp_dp_T1_qInFzbCVEWP0X
Price: £14.99
Things I like: Protects the screen while it’s closed, Magnet keeps the wallet closed well, Effective card slots and pocket slot, Effective stand, I like the case that holds the phone in the wallet, not too bulky.
Things of concern: It’s a wallet case, people either love them or hate them.
Comments: I had this case for my HTC 10 and they have improved this case immensely. Now having three card slots instead of two allows me to take my bank card, ID and my public transport card without having to double up in the slots (That can create further issues). The main issue with last years was the case that held the phone in place. Last year was a hard shell, now throughout my time working with phones, more than half of wallet cases I have seen have broken inner shells because they use a hard shell inside. This year they have basically taken the great Flexicase design and used it as the holder for the wallet case. That was a great move and make the wallet case great.
For a wallet case, this is a solid wallet case. You can’t really go wrong with it.
Photos: http://imgur.com/a/j1FFv
Orzly Slim Stand Case
Link to the case : https://www.amazon.co.uk/gp/product/B073S7BWQQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Price:£12.99
Things I like: THIS THING IS SLIM, the case itself may be the lowest profile case I have used on the OnePlus5, The stand can withstand a lot, stand can be rotated in different ways.
Things of concern: This case may not work with some in-car phone holders, the stand bulges out and made it hard for my vent holder to hold it.
Comments: I picked up this case because I was intrigued. I didn’t think I would like it but I really did! The case has a really nice soft touch finish and provides protection for the camera bump which is surprising as the case is really low profile , it provides a very small lip on the front so it may or may not protect the phone from if you put your phone screen down. The case doesn’t really take much away from the buttons which is nice.
The ring stand is really handy, A couple of times I’ve used it. I do find myself playing with the ring stand itself and hanging my phone off my finger, the case fits very well I can trust that my phone will stay there hanging. The stand really is quite strong. I can put a lot of force on the stand and it didn’t feel like it would break, (I have posted a video demoing that) The things I would say is that I would like the stand to have different standing points, it would be nice to have the phone to stand at different angles, while this isn’t a major thing, I thought I’d point it out.
I really like this case, nuff said.
Photos: http://imgur.com/a/kHBlm
Video:
Orzly Fusion Case
Link to the case : https://www.amazon.co.uk/gp/product/B072MPYX9Y/ref=od_aui_detailpages00?ie=UTF8&psc=1)
Price: £9.99
Things I like: Not bulky, feels like it would protect the case.
Things of concern: Can’t think of anything…
Comments: This is the case I have on my OnePlus5, I really like it. It’s like the FlexiCase but better. This honestly feels like this case has been designed by someone who’s wanting a make a case for themselves. There is extra grip points around parts of the case which your hand is in contact with. That’s a smart move. There is some little feet on the back around the clear back, this is a expert level move from Orzly, clear plastic scratches easily by doing this the plastic clear back from the ground. The clear back is quite hard and seems like it could withstand a drop, this is the motto of this case: it’s solid.
Photos: http://imgur.com/a/CqoVz
Comments About Orzly
One thing I have noticed is Orzly has revamped their packaging. It’s more like you would see in a shop and has nice little touches to them. Having a little tab to pull to open the box and having nice information (To read on the toilet obviously) adds to the over. Here is some photos : http://imgur.com/a/vZ4eu
Please ask any questions and if this helped someone, if you liked it I may do more.
Thanks so much for this. I agree with the flexicase and slim case, both have been great for me and I have already used the stand on the slim case for a train journey. Worked out great. I am looking forward to receiving my fusion bumper case from the reviews both you and niijonodhg have been giving!
Thanks for your review. Can't decide between slim stand and fusion case. I don't like a lot of bulk as the phone itself isn't the smallest one and I like to keep the look of it. Generally I'm very very careful with my phones but
Unfortunately I already cracked my screen (first time ever). Currently in repair.
abe2912 said:
Thanks for your review. Can't decide between slim stand and fusion case. I don't like a lot of bulk as the phone itself isn't the smallest one and I like to keep the look of it. Generally I'm very very careful with my phones but
Unfortunately I already cracked my screen (first time ever). Currently in repair.
Click to expand...
Click to collapse
Ouch hopefully you get it back soon! As for the slim case, it has virtually no screen protection but the stand is very useful and it is also a grippy case. You can put your finger in the ring part while your using it to help you stop dropping it.
I've made your decision even harder
abe2912 said:
Thanks for your review. Can't decide between slim stand and fusion case. I don't like a lot of bulk as the phone itself isn't the smallest one and I like to keep the look of it. Generally I'm very very careful with my phones but
Unfortunately I already cracked my screen (first time ever). Currently in repair.
Click to expand...
Click to collapse
If it helps, my favourite case so far has been the Fusion!
DarkExistence said:
Ouch hopefully you get it back soon! As for the slim case, it has virtually no screen protection but the stand is very useful and it is also a grippy case. You can put your finger in the ring part while your using it to help you stop dropping it.
I've made your decision even harder
Click to expand...
Click to collapse
Yes you do make it harder ?. I never used cases mainly for protection but more for the extra grip but dropping my OP5 makes me reconsider this. But when I dropped it I didn't have any case installed so it was pretty slippy. Maybe I try both cases as they are not that expensive .
abe2912 said:
Yes you do make it harder ?. I never used cases mainly for protection but more for the extra grip but dropping my OP5 makes me reconsider this. But when I dropped it I didn't have any case installed so it was pretty slippy. Maybe I try both cases as they are not that expensive .
Click to expand...
Click to collapse
Getting both of them might be a good option. My favorite is the fusion but the slim case is really good. The slim case adds grip to the phone without much bulk or extraprotection where as the fusion is really grippy as well as adding more protection.
DarkExistence said:
Ouch hopefully you get it back soon! As for the slim case, it has virtually no screen protection but the stand is very useful and it is also a grippy case. You can put your finger in the ring part while your using it to help you stop dropping it.
I've made your decision even harder
Click to expand...
Click to collapse
Yeah the stand feature for me is a must. Personally I prefer the Wallet Case version, as it's got that extra bit of screen protection with the fordable lid. But they're all nice in different ways.
AnabolicAndroidz said:
Yeah the stand feature for me is a must. Personally I prefer the Wallet Case version, as it's got that extra bit of screen protection with the fordable lid. But they're all nice in different ways.
Click to expand...
Click to collapse
Any stand is nice really, what I like about the slim stand case though is that you can put your finger in the ring and it will mean your phone cant drop, very useful actually
Just received my Orzly Fusion today and have to say: that thing is amazing! Adds minimal bulk but seems to be good protection. And the best thing is that it adds so much grip to the phone and makes it really comfortable to use.
abe2912 said:
Just received my Orzly Fusion today and have to say: that thing is amazing! Adds minimal bulk but seems to be good protection. And the best thing is that it adds so much grip to the phone and makes it really comfortable to use.
Click to expand...
Click to collapse
I also received mine today and I completely agree with everything.
I had the Ringke case on my Nexus 6P, which had the same type of back plastic and I know for a fact it does not yellow over time.
I also have a dBrand skin on my phone, and the case fit perfectly over it with no hassle at all. Dragon Skin with Orange Logo and Camera Cutout.
I also have the Orzly Tempered glass installed and the case fits perfectly around the glass as it should... Since it's from the same company.
ab7casper said:
I also received mine today and I completely agree with everything.
I had the Ringke case on my Nexus 6P, which had the same type of back plastic and I know for a fact it does not yellow over time.
I also have a dBrand skin on my phone, and the case fit perfectly over it with no hassle at all. Dragon Skin with Orange Logo and Camera Cutout.
I also have the Orzly Tempered glass installed and the case fits perfectly around the glass as it should... Since it's from the same company.
Click to expand...
Click to collapse
Looks really good with that dbrand skin! Glad to know you had the same sort of material that didn't yellow
ab7casper said:
I also received mine today and I completely agree with everything.
I had the Ringke case on my Nexus 6P, which had the same type of back plastic and I know for a fact it does not yellow over time.
I also have a dBrand skin on my phone, and the case fit perfectly over it with no hassle at all. Dragon Skin with Orange Logo and Camera Cutout.
I also have the Orzly Tempered glass installed and the case fits perfectly around the glass as it should... Since it's from the same company.
Click to expand...
Click to collapse
That is beautiful!
Finally got my video up:
niijonodhg said:
That is beautiful!
Finally got my video up:
Click to expand...
Click to collapse
Good video, I definitely agree. There's not much else to say about it.... Its a good case. It really compliments the phone.
ab7casper said:
Good video, I definitely agree. There's not much else to say about it.... Its a good case. It really compliments the phone.
Click to expand...
Click to collapse
Thanks!
Hi:
Has anyone found a reasonably high quality case for the LG X Venture/X Calilbur V9?
I love my X Venture, but I've already tried 3 cases for it. The first case-a MiniTurtle was complete garbage-unusable.
https://www.amazon.com/gp/product/B06Y2KZPD9/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
The second one, a Spevert, sold on Amazon
https://www.amazon.com/gp/product/B073XCWJ6P/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
was almost usable, but provided minimal protection, and was also somewhat junky.
The third, a Zizo Bolt, looked to be quite well-made in many ways, and provides good protection. However, the buttons are inline or even slightly recessed from the edge of the case, and also stiff. That makes them extremely difficult to press. The case is also a little too slippery in the hand.
Does anyone know of a quality case for the X Venture? I'd prefer all TPU for grip, but two layers would be fine.
I'm using an Incipio NGP case and I really like it. I wish it was clear because I really like the design of the X venture and I would prefer not to hide it, but the case does give a nice extra layer of protection and I really like how it makes the buttons feel (the buttons on my phone require barely any force to press, which I really don't like. The case provides a little bit of extra stiffness so it makes the buttons feel a lot better. Definitely not too stiff though). It's also pretty grippy, but not quite as grippy as the bare back of the phone in my opinion.
I also tried a Speck clear case and I really didn't like it. It made the buttons feel awful and the material that it's made of - I didn't like how it felt in the hand and it's also totally smooth so it has much less grip than the bare back of the phone.
Thanks Rich. Is it fairly thick as cases go, thin, or somewhere in between?
Rich:
Thanks. Compared with other cases, is it thick, thin, or somewhere in between? Any chance you could measure its thickness? It's made of TPU, right?
RichBordoni said:
I'm using an Incipio NGP case and I really like it. I wish it was clear because I really like the design of the X venture and I would prefer not to hide it, but the case does give a nice extra layer of protection and I really like how it makes the buttons feel (the buttons on my phone require barely any force to press, which I really don't like. The case provides a little bit of extra stiffness so it makes the buttons feel a lot better. Definitely not too stiff though). It's also pretty grippy, but not quite as grippy as the bare back of the phone in my opinion.
I also tried a Speck clear case and I really didn't like it. It made the buttons feel awful and the material that it's made of - I didn't like how it felt in the hand and it's also totally smooth so it has much less grip than the bare back of the phone.
Click to expand...
Click to collapse
Shplad said:
Rich:
Thanks. Compared with other cases, is it thick, thin, or somewhere in between? Any chance you could measure its thickness? It's made of TPU, right?
Click to expand...
Click to collapse
It's decently thick, a little bit more than I expected, and it feels very sturdy. It's not one of those cheap thin cases. If I had to guess I would say it's somewhere around 1.5mm thick. I don't know if it's made out of TPU but the website says it's made out of a polymer material. It's flexible but still feels very sturdy.
I don't know if this will help at all but I took a picture of the back camera cutout so you can kinda get an idea of how thick the case is: https://i.imgur.com/BdDx5zo.jpg Like I mentioned before, to me it looks like maybe 1 - 1.5mm.
Rich:
Thanks again. I know what you mean-the X Venture is elegant looking, isn't it.
Mmmm..that looks like more than 1.5mm to me, but it's hard to tell. The other thing I really was hoping for was a belt clip, which the Incipio doesn't have. I will consider getting one anyways, though. I can use it on my second LG X Venture. I like the phone so much I bought a second one as a backup.
I'm emailed Armor-X to see if they have a case to fit the Venture. Why is this so hard?
Shplad said:
Rich:
Thanks again. I know what you mean-the X Venture is elegant looking, isn't it.
Mmmm..that looks like more than 1.5mm to me, but it's hard to tell. The other thing I really was hoping for was a belt clip, which the Incipio doesn't have. I will consider getting one anyways, though. I can use it on my second LG X Venture. I like the phone so much I bought a second one as a backup.
I'm emailed Armor-X to see if they have a case to fit the Venture. Why is this so hard?
Click to expand...
Click to collapse
Oh, if you're interested in one with a belt clip Pelican makes a heavy-duty case that comes with a belt clip I believe: http://www.pelican.com/us/en/product/phone-and-tablet-cases/lg-case/voyager/c31030 (a little bit too big for me)
Unfortunately it's not a super popular phone so our case options are a bit limited compared to, say, a flagship. Plus, it is a rugged phone so it does have some pretty good protection by itself.