Hello friends i need help about Exodus 6.0
I'm using cm 12.1 lollipop 5.1.1 rooted and twrp recovery 3.0 installed ... Now I want to enter to the WORLD of custom ROM and I have downloaded "exodus-6.0-20160331-NIGHTLY-tomato.zip" and mini gapps package
I did following steps and get some error stuck at " patching system unconditionally .... "
For more than 1 hour
Steps I did are
First I have taken Nandroid backup using twrp backup
Then copied ROM zip and gapps package zip to internal storage
Then enabled android debugging and advance reboot to developer option
Then reboot to recovery and done wiping dalvik,system, data and cache
Then go back to main screen then install select exodus-6.0-20160331-NIGHTLY-tomato.zip and started flashing zip
It started for first showing target yureka 5.0.2 ....s1k1 (not exactly what the line was but something like this)
And at this stage " patching system unconditionally ...." I got stucked ......
Please guys help me find out what is the problem
Am I doing something wrong???
Any Help will be appreciated
I'm am using YU yureka AO5510
Related
guys i tryed to install cwm from command comport in android so my phone bricked and when i start it black screen apperas so want to install cwm from zip.i can run only android system recovery(3e) so is any .backup file or .zip file to i use as apply update from sdcard or restore user data to install cwm than i can flash rom and new android version and hope it will works
i have tryed recovery-clockwork-5.0.2.6.zip it starts flashing and i got
Error: invaild OTA package
update.zip is not correct
Installation aborted
PLEASE HELP ME GUYS
read more threads
navroza said:
guys i tryed to install cwm from command comport in android so my phone bricked and when i start it black screen apperas so want to install cwm from zip.i can run only android system recovery(3e) so is any .backup file or .zip file to i use as apply update from sdcard or restore user data to install cwm than i can flash rom and new android version and hope it will works
i have tryed recovery-clockwork-5.0.2.6.zip it starts flashing and i got
Error: invaild OTA package
update.zip is not correct
Installation aborted
PLEASE HELP ME GUYS
Click to expand...
Click to collapse
Hello navroza
please do read more threads about your phone here on XDA. there are always phone-relatet special ways to unlock bootloaders and to modify your phone in the correct way. to do that there is build special software that only works for your phone. You can damage your phone instantly if you use any other software of recovery- or bootimages that is not made for your phone.
hi guys i downloaded cm 11 from munjeni for my xperia go.
first it said error 7 i fixed it by deleting assert in the notebook.
now i finally flashed cm 11 in cwm recovery.
it is not rebooting.
can someone help or give tips what i could have done wrong.
Reboot request 10-15 min after installation
Sent from my ST25i using xda app-developers app
Error7 while installing CM11 on Xperia GO
stefanoclaes said:
hi guys i downloaded cm 11 from munjeni for my xperia go.
first it said error 7 i fixed it by deleting assert in the notebook.
now i finally flashed cm 11 in cwm recovery.
it is not rebooting.
can someone help or give tips what i could have done wrong.
Click to expand...
Click to collapse
Hi, I am also getting the same Error 7. How did you fix this issue. Please let me know. I am not familiar with the technical details..
stefanoclaes said:
hi guys i downloaded cm 11 from munjeni for my xperia go.
first it said error 7 i fixed it by deleting assert in the notebook.
now i finally flashed cm 11 in cwm recovery.
it is not rebooting.
can someone help or give tips what i could have done wrong.
Click to expand...
Click to collapse
Had you flashed the kernel in fastboot before installing the ROM in recovery?
The steps are:
1_Save zips folder with ROM and Gapps on your phone SD card
2_extract the folder with ROM on your computer (using 7zip or similar) and take the boot.img file
3_connect your phone with PC in fastboot mode and flash the kernel (typing "fastboot flash boot boot.img) in the command window
4_after that open your phone in recovery and wipe data/factory reset and cache partition
5_install the zip (with rom) from sd card (like you did)
6_wipe again data/factory reset and cache partition (just to avoid any bootloop)
7_install gapps from the zip
8_reboot system and you are done!
Note that the first boot with new ROMs always take a bit longer than usual...
lemon_lama said:
Had you flashed the kernel in fastboot before installing the ROM in recovery?
The steps are:
1_Save zips folder with ROM and Gapps on your phone SD card
2_extract the folder with ROM on your computer (using 7zip or similar) and take the boot.img file
3_connect your phone with PC in fastboot mode and flash the kernel (typing "fastboot flash boot boot.img) in the command window
4_after that open your phone in recovery and wipe data/factory reset and cache partition
5_install the zip (with rom) from sd card (like you did)
6_wipe again data/factory reset and cache partition (just to avoid any bootloop)
7_install gapps from the zip
8_reboot system and you are done!
Note that the first boot with new ROMs always take a bit longer than usual...
Click to expand...
Click to collapse
thanks a lot the problem was that i didn't had unlocked bootloader everything is solved now i am running cyanogenmod 11 on xperia go.
icooldude007 said:
Hi, I am also getting the same Error 7. How did you fix this issue. Please let me know. I am not familiar with the technical details..
Click to expand...
Click to collapse
u have to have unlocked bootloader and be rooted.
stefanoclaes said:
thanks a lot the problem was that i didn't had unlocked bootloader everything is solved now i am running cyanogenmod 11 on xperia go.
Click to expand...
Click to collapse
Congrats you succeeded to get cm11.
I'm also looking to flash cm11 but for that unlocked bootloader is needed and by doing that I'll lost bravia engine.That was other thing. What u wanted to ask is that while unlocking bootloader which steps did you follow.
Know there's a bunch of thread about that, but I want you to tell me.I mean any step you want me to do that carefully or any other thing.
What about if you want to relock your bootloader.
Sent from 'not any permanent posture/position' using Xperia go
unlocking bootloader
1 root your phone i used kingo root
2 unlock bootloader
3 go to the sony developping sitehttp://unlockbootloader.sonymobile.com/
4 fellow the steps untill they give the code to unlock your phone now download http://forum.xda-developers.com/showthread.php?t=2335555 for flashing software and connecting with abd
5 download http://forum.xda-developers.com/showthread.php?t=1560613 this put your imei code and your unlock code there and turn your device off and connect in fastboot (volume up and the connect cable it will say in the aplication if it worked warning be sure you make a backup becouse he is gonna make factory reset
6 dowload a custom rom (cm 11 with gapps) put it in a folder on your pc and extract the zip file put the normal zip file on your xperia go internal storage and not in a folder
7 download recover x from play store to install cwm or twrp
8 go in the flashtool from androxyde and
9 look if he gets root acces and that you have busybox installed (dont forget to put usb debugging on)
10 click the lightning and select fastboot mode
11click reboot into fastboot mode (via abd)
12 reboot into fastboot mode (via fastboot)
13 select kernel to flash and find the image in the folder you made on the pc instal it and disconnect your xperia when done
14 go in your recovery on your xperia by holding the power button and tapping volume up do this untill you see recovery
15 select backupp and restore and then backupp to save a copy of your rom
16Select "wipe data/factory reset" and "wipe cache partition" then "advanced > wipe Dalvik cache."
17 select instal zip from sd card choose zip from sd card choose the rom where you flashed the kernel of in the flashtool confirm and do the same with the gapss 4.4 if you dont do this you might have no playstore and google plus
18 select reboot and enjoy your rom
i am no develloper but i am pretty sure it will work it worked for me and if your divice is bricked no worry just go install the sony updater softwarehttp://www.sonymobile.com/nl/tools/update-service/ good luck there are enough how to videos on youtube.
MI PAD
Stuck on flashing the ROM not completing
In mi pad
Showing patching image unconditionally
Not completing and showing no error too
After wiping cache data system and my space does not get converted into 1.2GB after flashing zip file given in mui forum thank you
shal007 said:
MI PAD
Stuck on flashing the ROM not completing
In mi pad
Showing patching image unconditionally
Not completing and showing no error too
After wiping cache data system and my space does not get converted into 1.2GB after flashing zip file given in mui forum thank you
Click to expand...
Click to collapse
Try CWM to flash the repartition zip.
shal007 said:
MI PAD
Stuck on flashing the ROM not completing
In mi pad
Showing patching image unconditionally
Not completing and showing no error too
After wiping cache data system and my space does not get converted into 1.2GB after flashing zip file given in mui forum thank you
Click to expand...
Click to collapse
After repartition try reboot to recovery
System need to mounting
follow guide MIUI with the tittle : "[Tips & Tutorials] [SMod]Resize/extend System One Partition Capacity for Mi Pad "
(xda does not allow me to post link)
flash to CWM if it does not work with TWRP as mine does not work in TWRP but work in CWM,
I also face this problem.not install rom
Flash the CM 12.1 rom, let the rom booting up, go to twrp, make backup, flash the zip for resizing partitions, and restore the backup, go to play store and install ''diskinfo'' and check if the partition is 1.2 gb. if yes flash the los 14.1
did it thanks to all
Thanks :good::good::good:
Hi guys,
I'm heavy in trouble with my Xperia Z1 tablet since I have flashed LineageOS 15.1 on that tablet by TWRP.
Short version:
The problem:
I was not be able to copy the TWRP to /FOTA partition by TWRP before. Since TWRP was replaced by a LineageOS recovery in the /boot partition and I do not find a way to install TWRP by this Lineage recovery, now I have a device with Lineage recovery only.
Long version
What did I do:
(1) The Lineage 15.1 was working fine for 5 minutes but when I have realized that I forget to install GApps I went to the recovery mode and surprisely the Lineage recovery was started.
(2) Now I did the mistake to wipe the /system and cache using that LineageOS recovery
(3) When I try to reinstall the 'twrp-3.2.3-0-pollux.img' or 'lineage-15.1-20190330-nightly-pollux-signed.zip' by Lineage recovery from SD card, the installation breaks with an error
"E:Unable to open /sideload/package.zip : Tranport endpoint is not connected
E:failed to map file
Installation aborted.".
Conclusion
Now I have a device with empty /FOTA and empty /system partition. The Lineage recovery is the only once I have on my device.
Also I'm wondering that the device is recognized as Android fastboot device from now on when I boot into bootloader.
Does there a way to reanimate my Xperia Z1 or do I have a valueable brick from now on ??
How can I write images to the /boot partition by Lineage recovery?
Thanks for help
Tom
Solved
Hi guys again,
thank you for your valuable support. I was be able to solve this issue by myself using the "fastboot" tool. With fastboot you can download a new fresh TWRP on '/boot' so that I was be ablte to install a new custom ROM.
Thanks
Tom
Tom_Scott said:
Hi guys again,
thank you for your valuable support. I was be able to solve this issue by myself using the "fastboot" tool. With fastboot you can download a new fresh TWRP on '/boot' so that I was be ablte to install a new custom ROM.
Thanks
Tom[/QUOTE
I've the same problem with my pollux windy. It's impossible for me to boot my tablet. And unfortunately, i want to flash recovery in fastboot mode but don't works. I ve a problem with windows 10 who not recognize the driver. Help me please ? How have you proceed to soluce ??????
Click to expand...
Click to collapse
jeromelec said:
I've the same problem with my pollux windy. It's impossible for me to boot my tablet. And unfortunately, i want to flash recovery in fastboot mode but don't works. I ve a problem with windows 10 who not recognize the driver. Help me please ? How have you proceed to soluce ?
Click to expand...
Click to collapse
Sorry, I have Windows 7. The drivers works on my Windows 7. But I guess that the drivers are working on Windows 10 also.
Hi
I reset all data and setting from inside of android, after booting up, there is no OS and android there and all things are gone, I do below things to install the android again and nothing working for me PLEASE HELP!!!!!
I downloaded the original rom from asus.com (android 8) and tried below ways with no success to install the rom:
TWRP :
1- error 6, 7, 4, (removed some rows of script file) but not worked
2- zip file corrupted( rebuild the zip again) Not worked
3- can not erase catch and etc, fixed but not helped to solve the problem.
4- installed 3.1.1 , Not helped
FASTBOOT:
1- erase catch, system, boot, recovery , NOT HELPED
2- installed boot.img, system.img (after a lot of error), recovery, NOT WORKED
Installed Git bash and CMDER to use instead of CMD, NOT HELPLED
Can anyone tell me and help me please?
any help ??!