/sbfs' (invalid argument) - Galaxy S6 Edge Q&A, Help & Troubleshooting

So I were trying to flash Cyanogenmod 13 onto my phone, along with arter kernel. Flashing Arter kernel were a wrong thing to do, and after formatting the whole phone, flashing stock ROM, then flashing custom recovery, booting into custom recovery, and flashing a ROM I've used before, I suddenly get the /sbfs' (Invalid Argument) in red text when I decided to flash an ROM add-on package. Someone help me?

Related

broken cache partition?

when switching through windows inside Recovery or trying to wipe cache i get
E: Can't mount /dev/block/mmcblk0p36
(File exists)
E: Can't mount CACHE:recovery/log
E: Can't open CACHE:recovery/log
E: Can't mount /dev/block/mmcblk0p36
(File exists)
im allways rooted/S-OFF
Recovery is Amon Ra 3.15
Ive tried to reflash the Latest RUU. and itll boot and i can use the stock rom but i usually use custom rom
but flashing the latest RUU didnt solve my problam
I am currently formatting my Internal_Sd and mt Sd card to Fat32 right now
ok im stuck on booting after nandroid restore
someone please help!
Stuck where? I would try flashing the kernel for the ROM in the nand and see if that does it.
Also, I've read conflicting info about whether you can restore a nand that was made before updating firmware with an RUU. If any resident experts can comment on this I'd appreciate it as I was going to post a thread asking this.
Did the RUU update yours or was it already running the same firmware?
Also, you were able to boot when on the RUU or no? If yes, you might just flash a ROM fresh rather than restore a nand.
feralicious said:
Stuck where? I would try flashing the kernel for the ROM in the nand and see if that does it.
If not, then give a little history on what you had on before your troubles and what you're trying to get back to, etc...
Click to expand...
Click to collapse
i fallowed this http://forum.xda-developers.com/showthread.php?t=1615969&page=3
im not getting the error inside the recovery anymore. im about to try a nandroid restore
Boot was completely successful. everything is fixed
(thread closed)

E:failed to mount /system (invalid argument)

T-mobile Galaxy Note 2
Hi
I need some help
i wanted to get back to stock 4.3 after dn4 but anytime after flashing 4.3 via odin, it doesnt work. it always takes me back to android recovery 3e. with some red inscription that E: E:failed to mount /system (invalid argument) etc
I also tried with the 4.1.1 firmware but still same. but i am able to root, install cwm again and flash back to dn4. Is there a way i can go back to stock from here or the bootloader is locked? help please
I also tried flash the firmware via mobile odin , but that too didnt help...any solutions??

new bootloader and blusparks recovery but cant install custom recovery

i've tried to flash many custom roms but i could only sucessfully boot up in roms that were modded versions of oos, other roms were stuck in bootanimation...
unlocked bootloader, rooted, bluspark recovery, did do the bootloader update process too... pls help!
I think it's something your flashing after ROM like SuperSU. Try flashing just the ROM and see if it boots. Side note there was a version of cm14.1 that wouldn't boot unless you flashed custom kernel like Arsenic.
Exodusche said:
I think it's something your flashing after ROM like SuperSU. Try flashing just the ROM and see if it boots. Side note there was a version of cm14.1 that wouldn't boot unless you flashed custom kernel like Arsenic.
Click to expand...
Click to collapse
ive tried aresenic kernel but im still stuck at boot animation... followed so many guides none of them working for me... only problem i can see is im seeing "failed to mount /persist (invalid argument)"
karasmunay said:
ive tried aresenic kernel but im still stuck at boot animation... followed so many guides none of them working for me... only problem i can see is im seeing "failed to mount /persist (invalid argument)"
Click to expand...
Click to collapse
Try updated TWRP like 3.0.2-0 or latest 3.0.3.

Galaxy S3 Partitions dont mount anymore

Hello,
Yesterday I unlocked my Galaxy S3 i9300, turned the Wifi on and soon after that my phone started to reboot.
This happened a few times before, but this time it got stuck on the "Galaxy S3" Screen.
So I booted in the Recovery Mode (TWRP 3.1.10) and was planning to wipe the cache partition, but I got the Error that the Recovery is unable to mount Any Partition..
So I cant do anything.
I wanted to ask, why my phone can not mount any Partitions anymore for example (system, efs, cache..).
What exatly is damaged and is it repairable?
I took a picture of the Error Message, but i dont know how to upload it. So I wrote it down.
Hope someone can help me and sorry for my bad english.
Kind Regards.
Error Message:
Updating partition details...
Failed to mount ´/efs´(invalid argument)
Failed to mount ´/cache`(invalid argument)
Failed to mount ´/system´(Invalid argmunent)
Failed to mount ´/data´(Invalid argmunent)
Failed to mount ´/preload´(Invalid argmunent)
Flash stock rom via Odin. Root it and try again.
ArdaCsknn said:
Flash stock rom via Odin. Root it and try again.
Click to expand...
Click to collapse
I am facing same errors. in these type of error i can't flash with odin, can't hard reset, can't install any recovery, i have tried many roms but all failed. i was thinking about to re-partition it but there is a file required for this .pit file. i have searched on google but i didn't find any .pit file for my Samsung S3 SHV-E210k. i have asked in thread but no response from anyone. so i am thinking to threw my phone away. :crying: :crying: :crying:
E30325i said:
Hello,
Yesterday I unlocked my Galaxy S3 i9300, turned the Wifi on and soon after that my phone started to reboot.
This happened a few times before, but this time it got stuck on the "Galaxy S3" Screen.
So I booted in the Recovery Mode (TWRP 3.1.10) and was planning to wipe the cache partition, but I got the Error that the Recovery is unable to mount Any Partition..
So I cant do anything.
I wanted to ask, why my phone can not mount any Partitions anymore for example (system, efs, cache..).
What exatly is damaged and is it repairable?
I took a picture of the Error Message, but i dont know how to upload it. So I wrote it down.
Hope someone can help me and sorry for my bad english.
Kind Regards.
Error Message:
Updating partition details...
Failed to mount ´/efs´(invalid argument)
Failed to mount ´/cache`(invalid argument)
Failed to mount ´/system´(Invalid argmunent)
Failed to mount ´/data´(Invalid argmunent)
Failed to mount ´/preload´(Invalid argmunent)
Click to expand...
Click to collapse
Try to find .pit file and flash it with odin. and then flash your stock rom.
My phone's model is SHV-E210K, i have searched on google but haven't found any .pit file related to my phone.
The sboot.bin file is the bootloader and it is not flashing because the bootloader in the phone is newer than than the bootloader in the ROM, the ROM is not for the phone, try a different USB cable, and/or try different USB ports.
The problem is recovery has gone crazy. Recovery mounts partitions. I've seen this problem a lot with twrp. When it happened to me I flashed the latest official cwmr via Odin. If you have a stock rom on the phone you can flash a stock recovery too. DO NOT FLASH A STOCK RECOVERY IF YOUR ROM ISN'T STOCK/ROOTED STOCK!!!
Beamed in by telepathy

boot help

Please help phone stuck on samsung galaxy siii gt-i9300 logo have got cwm recovery and odin need stock rom with pit ?
Try flashing the latest stock ROM with Odin or factory reset.
where do i find stock rom with pit file ? cannot seem to locate
Try flashing without a pit file.
Stock roms are at Sammobile.com, updato.com, or Samsung-firmware.org.
thanks i will try again but i believe i damaged pit when i was trying to root by selecting re partion box, so re flash with pit firmware or replace motherboard ?
tried to flash stock rom and rom with pit no just stuck on startup with samsung galaxy siii gt-i9300 can get into recovery and odin mode.
Try flashing a stock firmware first. If there is any problems with the partitioning odin will tell you.
If odin says you need a pit file that's when you start looking for one.
thanks for all your help, after flashing with stock rom using odin, phone now boot to samsung logo and keeps looping ?
When i trying to root i think by mistake i ticked the re partion box should i get another motherbaord ?
If the phone flashed a stock ROM without a pit file, try performing a factory reset from recovery mode.
I get this message;
E: failed to mount /data (invalid argument)
cant mount to /data (invalid argument)
Manual mode
applying multi csc
applied csc code
succesfully applied csc code
E: failed to mount /data (invalid argument)
cant mount to /data (invalid argument)
E: failed to mount /data (invalid argument)
quick update after factory reset and loading stock 4.3 phone came to life again, i then installed linear rom and rooted with twrp.

Categories

Resources