Related
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Warning
This recovery will TRIP your Knox Counter and your warranty will be void.
This recovery is only for Samsung Galaxy A700FD Qualcomm Snapdragon variant running 5.0.2 (lollipop).
Tested Safely on following devices.
Samsung Galaxy A700FD
Why TWRP ? Why not some rooted firmware which keeps warranty safe ?
TWRP is a custom recovery. It has many more functionality than stock recovery! if something goes wrong while flashing something you can always make a backup use this recovery which can be restored when things get messed. if mess is of large extend you can always flash stock firmware.
Why new TWRP Recovery ?
The older version which was released will not be compatible with cm structure due to mount points and hence this recovery will be supportable for all custom flashing.
Instructions
Follow the instructions carefully.
Step 1 :
Install Samsung Drivers and connect your device to PC. let it install drivers and if its updating let it update. your device drivers should be perfectly installed without a single failure.
Link to Samsung Drivers
Step 2 :
Download Odin 3 you can use 3.07 or 3.09
You can download Odin from here
Download the TWRP Recovery
Step 3:
Turn of your device and go to odin mode [ Vol down + power + home button (all at the same time) ] release it when you see Galaxy A7 Logo
Press vol up to confirm
Step 4:
Now that you are in Odin Mode connect your device via USB cable.
Now open Odin3 3.09 or 3.07 that you have downloaded.
If there is a pop-up like Installing ADB drivers let it get finished it usually updates.
Make sure the COM : xx (xx is usb port number it can be any number so dont worry about it,just verify COM is lit up)
Now select AP and browse to where you have .tar file and select it
Make Sure only Default Auto Reboot and F. Reset Time is ticked and nothing.verify twice only these 2 are ticked.
Untick Auto Reboot if you are installing recovery for first time!
Click Start and wait for the process to end. DO NOT Interrupt during this time.
Once it says PASS. BOOT INTO RECOVERY USING VOL UP + HOME + POWER BUTTON.
Done.
Credits:
TWRP Team for their awesome recovery.
@RVR for testing recovery!
XDA:DevDB Information
TeamWin Recovery Project, ROM for the Samsung Galaxy A Series
Contributors
jackeagle
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Current Stable Version: 3.0.2.0
Stable Release Date: 2016-03-07
Created 2016-03-07
Last Updated 2016-05-25
Downloads
TWRP Build 1
TWRP Build 2 (V3.0.0)
TWRP v3.0.2.0 (Build 3)
TWRP v3.0.2.0 (Build 4)
Changelog
Code:
27/06/2016
- Added Compatibility for Samsung Marshmallow Firmware Release
- Merged with Samsung Marshmallow kernel release
- TWRP upstream merge.
25/05/2016
- Fixed Recovery Loop Issues.
- Fixed MTP Media Transfer on Recovery.
- Added EFS Partition Backup Option
- Fixed Brightness Slider
- Updated TWRP to latest v3.0.2.0
07/03/2016
- Updated TWRP to v3.0.0
20/11/2015
- Initial Release
Reserved 2
I need a custom recovery for Galaxy A8 (A800F) please.
Thanks
How to root Galaxy A700FD and install a recovery running on lolipop 5.0.2.
Developers please go for Samsung Galaxy A7 A700FD ..
Sent from my SM-A700FD using Tapatalk
Nice keep posting about A700FD
Sent from my SM-A700FD using Tapatalk
TWRP Link is dead.
TWRP updated to v3.0.0.
Links are in OP.
Enjoy!
jackeagle said:
TWRP updated to v3.0.0.
Links are in OP.
Enjoy!
Click to expand...
Click to collapse
build 2 is invalid ,help
nukedanoob said:
build 2 is invalid ,help
Click to expand...
Click to collapse
Use this link: https://www.androidfilehost.com/?fid=24438995911970888
and what if I can't flash because of secure boot enabled?
(in download mode there is a line "Qualcomm Secureboot - Enabled (CSB)" and "Write Protection - Enabled". I think this is the cause).
what should I do? any help appreciated.
nevermind. it was a faulty cable.
lifehijack said:
Use this link: https://www.androidfilehost.com/?fid=24438995911970888
Click to expand...
Click to collapse
thanks
A7000 want to twrp 3.0.0too
来自我的 SM-A7000 上的 Tapatalk
lifehijack said:
Use this link: https://www.androidfilehost.com/?fid=24438995911970888
Click to expand...
Click to collapse
works fine,just rename the file
Qualcomm Secure Boot is enabled and trying to flash recovery gives this message on phone
secure check fail : recovery
Custom Binary(recovery) Blocked by A/L
Odin says Fail
Solved: Disabled Reactivation Lock in security settings
Phone booting into recovery each time when I reboot the phone. How to come out of recovery mode boot loop?
Can i use it on my a7000?
Hello jackeagle, I ask you to continue the CM13 E5 project, I enjoyed the rom! If I can help in any way! even a my donation and my friends for you to continue the rom!
Always get kernel not seandroid enforcing .... i cannot boot to the system i just installed... just a blank screen
. .
Code:
#I am not responsible for broken phones, missed calls, missed texts,
#cats destroying your house or anything else that happens.
#Flash this at your own risk.
CyanogenMod Recovery. Used as an alternative to TWRP Recovery.
Tested bootable on 16gb Amazon variant Blu R1HD.
Has not been tested on any other variant yet.
Recovery Download
Flash to device with:
Code:
Fastboot flash recovery Recovery-R1HD-CMR.img
Boot without flashing with:
Code:
Fastboot boot Recovery-R1HD-CMR.img
Use Volume keys to move through menus and power to select.
Or use touch, full touch working.
XDA:DevDB Information
CyanogenMod Recovery - Blu R1 HD, Tool/Utility for the BLU R1 HD
Contributors
bullet25, jasonmerc, mrmazak, ColtonDRG
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2016-09-28
Beta Release Date: 2016-09-15
Created 2016-09-16
Last Updated 2016-09-28
reserve 2
is that recovery a fix to the alpha cm13 **********25 not being mounted/found error that i seen ( i should of logged that error ) . also quick question is it a twrp version of it because cm13 recoveries tend to not want to install other zips besides cm13 ota's?
KazuDante said:
is that recovery a fix to the alpha cm13 **********25 not being mounted/found error that i seen ( i should of logged that error ) . also quick question is it a twrp version of it because cm13 recoveries tend to not want to install other zips besides cm13 ota's?
Click to expand...
Click to collapse
At the moment this recovery won't fix anything. It's purely a CM Recovery that I finally got to working with a build. My hopes is that now that this boots and works I will be able to get CM to boot.
bullet25 said:
At the moment this recovery won't fix anything. It's purely a CM Recovery that I finally got to working with a build. My hopes is that now that this boots and works I will be able to get CM to boot.
Click to expand...
Click to collapse
oh ok..i understand......whats the fastboot command to boot it without flashing it.... fastboot boot recovery recovery.img(direct. of the recovery file)
KazuDante said:
oh ok..i understand......whats the fastboot command to boot it without flashing it.... fastboot boot recovery recovery.img(direct. of the recovery file)
Click to expand...
Click to collapse
It's just "fastboot boot recovery.IMG"
If terminal session is in same folder as file, if not you can put full path to recovery in the command
KazuDante said:
is that recovery a fix to the alpha cm13 **********25 not being mounted/found error that i seen ( i should of logged that error ) . also quick question is it a twrp version of it because cm13 recoveries tend to not want to install other zips besides cm13 ota's?
Click to expand...
Click to collapse
It isn't twrp
Updated to be fully touch working and back button fixed. This should now have no issue and is stable.
Official TWRP For Moto G5 Cedric
Post 1 - Instructions
Post 2 - FAQs
For full details and notes see
Official TWRP for Cedric Site
For TWRP news change logs etc see
TWRP Official Site
Instructions
For non rooted and rooted phones
Requirements
Unlocked bootloader
Fastboot drivers installed on PC
Download Official TWRP Image
Rename the downloaded img file recovery.img
Put phone into fastboot mode (hold vol down + power button)
Connect phone to PC
Open a command prompt where you have fastboot and the TWRP image file located
Type the following in command prompt (recovery.img is the name of your twrp img you downloaded & renamed)
To permanently flash twrp replacing stock recovery
Code:
fastboot flash recovery recovery.img
To only boot to twrp temporarily keeping stock recovery
Code:
fastboot boot recovery.img
Select recovery using the volume keys and power button to select
Now read important notes section For Stock Rom Users at the end of this post and the FAQs in the 2nd post
Note for Windows 10 users who use the powershell and not cmd
The command will become
Code:
./ fastboot flash recovery recovery.img
Or
Code:
./ fastboot boot recovery recovery.img
For rooted phones only
If you are already rooted you can upgrade your TWRP version using the official TWRP app
Download TWRP App
Select Cedric as your device
Download the TWRP image
Select the TWRP to flash
Now read the FAQs in the 2nd post
Important Notes For Stock Rom Users
When you first start TWRP it will ask you to swipe to allow modifications - If you do this your stock rom will no longer boot unless you disable dm-verity.
This can be done either by flashing a disable dm-verity zip or by flashing Magisk zip which will disable it for you
Source Code
TWRP 32bit For Cedric Github Source
TWRP 64bit For Cedric Github Source
XDA:DevDB Information
[Official] TWRP 3.5.2_9-0 Moto G5 Cedric [32/64bit Roms], Tool/Utility for the Moto G5
Contributors
TheFixItMan, JarlPenguin
Source Code: https://github.com/TeamWin/android_device_motorola_cedric
Version Information
Status: Stable
Current Stable Version: TWRP 3.5.2_9-0
Stable Release Date: 2021-04-05
Created 2017-11-03
Last Updated 2021-04-05
FAQs
Q - Does the official twrp version support 64bit roms?
A - Yes - as of version 3.4.0-1
Q - I get error 255 when trying to flash a rom
A - You are using a 32bit twrp version. Please update to the latest 64bit version
Q - Can I use the 64bit version on 32bit roms?
A - Yes the 64bit version supports both 64bit & 32bit roms
Q - Does the official twrp version support treble rom?
A - Yes - as of version 3.4.0-1
Q - Does this recovery support decryption of data
A - Yes on all current 32/64bit roms - If you swap roms you will need to format data first to remove encryption before flashing the new rom then you can encrypt again
Q - My phone keeps booting to recovery on restart and can only be started normally through the bootloader
A - First try removing your SD card and see if your phone boots - If that doesn't work see This Post
Q - Where is the disable dm-verity zip?
A - You can download it Here
or old version can be found Here
Q - Where is the Magisk zip
A - See Magisk Thread
You may need to manually install the magisk manager app apk depending on which rom you are using
Q - It says "image not signed or corrupt" when I flashed image
A - This is normal as the image is not signed by Motorola
Q - When restoring backup I get an error starting Extracttarfork
A - Sometimes you need to format data before restoring backup - In fastboot mode enter the command
fastboot erase userdata
This will format all data on internal storage (pictures music documents downloads etc) so backup first!
Reserved
Thanks
Happy to hear that we got the official twrp support
I have a cedric device. I unlocked my bootloader. Then through fastboot i tried to install twrp-3.1.1-0-cedric.img.
But it says "image not signed or corrupt".
As on the other threads, they said that to directly go into recovery mode ignoring other things. But that did not work. It said "no command".
Please help with flashing twrp.
Edit- It worked after 5-6 attempts.
aashaydesh said:
I have a cedric device. I unlocked my bootloader. Then through fastboot i tried to install twrp-3.1.1-0-cedric.img.
But it says "image not signed or corrupt".
As on the other threads, they said that to directly go into recovery mode ignoring other things. But that did not work. It said "no command".
Please help with flashing twrp.
Click to expand...
Click to collapse
It will always say that because the image is not signed by Motorola
As long as it says write OK at the end
The easiest way is to type
fastboot flash recovery then drag the recovery image into the terminal window - this will automatically complete the rest of the command
I'll also write a note for Windows 10 users who use the power shell
You need to put ./ first
Just to let everyone know about encryption on oreo roms
If you have previously encrypted your phone you must remove encryption before flashing an oreo rom by doing format data from the wipe menu (different from wipe data) & booting the phone fully to check encryption has been removed
You can then flash the oreo rom
After flashing this rom you can encrypt the phone again if you want
Encryption is fully supported
My TWRP (official) can decrypt data of lineageos 15 rom (32bit) as Iv just tested it
bootloop to recovery and SD-ext
I went through all this procedure of unlocking and installing twrp yesterday. As I nearly experienced a heart attack, I would like to kindly ask you to expand your Q/A-section for the mental safety of my fellow G5 users.
If you follow each step, you still can run into the bootloop-to-recovery trouble. My system was formatted with an SD-card as extended internal memory, and I formatted everything exept SD-ext, which I might have done. Clearing the misc partition had no success until I removed the SD-card, and rebooted TWRP.
So basically my recommendation is: remove your SD-card before the procedure.
Happy flashing and thank you for your guide.
TheFixItMan said:
FAQs
Q - My phone keeps booting to recovery on restart and can only be started normally through the bootloader
A - See This Post
Click to expand...
Click to collapse
No-New-Phone said:
I went through all this procedure of unlocking and installing twrp yesterday. As I nearly experienced a heart attack, I would like to kindly ask you to expand your Q/A-section for the mental safety of my fellow G5 users.
If you follow each step, you still can run into the bootloop-to-recovery trouble. My system was formatted with an SD-card as extended internal memory, and I formatted everything exept SD-ext, which I might have done. Clearing the misc partition had no success until I removed the SD-card, and rebooted TWRP.
So basically my recommendation is: remove your SD-card before the procedure.
Happy flashing and thank you for your guide.
Click to expand...
Click to collapse
Added to Faq and guide
Hi, sorry if this is a silly question, but just thought I'd ask to be on the safe side... Is it safe to flash TWRP 3.2.0 that is now available for cedric through the TWRP app or would it be better to give it a miss for now?
RaddingtonBear said:
Hi, sorry if this is a silly question, but just thought I'd ask to be on the safe side... Is it safe to flash TWRP 3.2.0 that is now available for cedric through the TWRP app or would it be better to give it a miss for now?
Click to expand...
Click to collapse
Should be fine - changelog on twrp site
New twrp version available
What's new in 3.2.0-0:
Allow restoring adb backups in the TWRP GUI (bigbiff)
Fix gzip backup error in adb backups (bigbiff)
Fix a bug in TWRP's backup routines that occasionally corrupted backup files (nkk71)
Better support for installing Android 8.0 based zips due to legacy props (nkk71)
Support vold decrypt with keymaster 3.0 in 8.0 firmwares (nkk71)
Decrypt of synthetic passwords for Pixel 2 (Dees_Troy)
Support newer ext4 FBE policies for backup and restore in libtar (Dees_Troy)
v2 fstab support (Dees_Troy)
Bring TWRP forward to android 8.0 AOSP base (Dees_Troy)
Various other minor bugfixes and tweaks
Boot
Twrp 3.2 problem not shutdown phone always restart system
Go twrp and shutdown always restart system.Use Android 8 Oreo Rom
What's new in 3.2.1-0:
* minui fixes (cryptomilk)
* Better android-8.0 compatibility in ROM trees (Dees_Troy)
* Fix missing library in android-8.0 (nkk71)
* Fix inconsistent SDCard naming (DevUt)
* Default to TWRP restore instead of adb backup restore to fix restore on fresh TWRP boot (jlask)
TheFixItMan said:
What's new in 3.2.1-0:
* minui fixes (cryptomilk)
* Better android-8.0 compatibility in ROM trees (Dees_Troy)
* Fix missing library in android-8.0 (nkk71)
* Fix inconsistent SDCard naming (DevUt)
* Default to TWRP restore instead of adb backup restore to fix restore on fresh TWRP boot (jlask)
Click to expand...
Click to collapse
Thanks a lot for maintaining cedric, you are king man
I unlocked the bootloader and flashed the twrp on my friends Moto g5 and after that if I restart it boots up to recovery only. I did all that's said in the xda forums and still the problem exists.i then wiped away all partitions and installed lineage 14.1. even now the problem exists. After lots of trying I found that going to bootloader and pressing start boots the phone normally. But it's tough to to it always he has to power on the phone. Can someone help me solve this problem
Sent from my Motorola Moto G 2014 using XDA Labs
ProGamer02224 said:
I unlocked the bootloader and flashed the twrp on my friends Moto g5 and after that if I restart it boots up to recovery only. I did all that's said in the xda forums and still the problem exists.i then wiped away all partitions and installed lineage 14.1. even now the problem exists. After lots of trying I found that going to bootloader and pressing start boots the phone normally. But it's tough to to it always he has to power on the phone. Can someone help me solve this problem
Sent from my Motorola Moto G 2014 using XDA Labs
Click to expand...
Click to collapse
Read the faq!
Nice
Thanks Men
Does it have support for 64 bit roms?
XZS/KEYAKI/G8231 OmniROM BUILDS
PIE 9.0
DOWNLOAD WEEKLY
REQUIREMENTS TO SUCCESSFULLY FLASH OMNIROM:
1. The device has the latest stock ftf
2. The device has an unlocked bootloader
3. The ODM image zip has been downloaded from HERE, and the ODM image has been extracted from it
4. The WEEKLY zip file has been downloaded and copied to the device
INSTALLATION INSTRUCTIONS:
1. Reboot device to fastboot mode, and flash the ODM image with this command
Code:
fastboot flash oem <ODM image>
2. Reboot device to TWRP and flash the WEEKLY zip file
3. (Optional) Flash a gapps package
4. Reboot device to system
CURRENT ISSUES ON OFFICIAL:
1. Device wakes up by itself every 5 seconds, reason unknown
2. Camera quality is suboptimal
KERNEL SOURCE: https://github.com/omnirom/android_kernel_sony_msm/tree/android-9.0
BUG REPORTS
REPORT BUGS ONLY:
- AFTER A CLEAN INSTALL
- USING STOCK OMNI KERNEL
- NO MODS OF ANY SORT
OMNI GERRIT REVIEW
https://gerrit.omnirom.org/
DISCLAIMER:
No one is responsible for any damage done to your device but YOU. You've been warned.
XDA:DevDB Information
[ROM][XZS][P][9.0][WEEKLY]OmniROM, ROM for the Sony Xperia XZs
Contributors
oshmoun, humberos
Source Code: https://github.com/omnirom
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: latest stock ftf
Version Information
Status: Beta
Created 2019-03-17
Last Updated 2019-03-17
oshmoun said:
XZS/KEYAKI/G8231 OmniROM BUILDS
PIE 9.0
DOWNLOAD WEEKLY
REQUIREMENTS TO SUCCESSFULLY FLASH OMNIROM:
1. The device has the latest stock ftf
2. The device has an unlocked bootloader
3. The ODM image zip has been downloaded from HERE, and the ODM image has been extracted from it
4. The WEEKLY zip file has been downloaded and copied to the device
INSTALLATION INSTRUCTIONS:
1. Reboot device to fastboot mode, and flash the ODM image with this command
Code:
fastboot flash oem <ODM image>
2. Reboot device to TWRP and flash the WEEKLY zip file
3. (Optional) Flash a gapps package
4. Reboot device to system
CURRENT ISSUES ON OFFICIAL:
1. Device wakes up by itself every 5 seconds, reason unknown
2. Camera quality is suboptimal
KERNEL SOURCE: https://github.com/omnirom/android_kernel_sony_msm/tree/android-9.0
BUG REPORTS
REPORT BUGS ONLY:
- AFTER A CLEAN INSTALL
- USING STOCK OMNI KERNEL
- NO MODS OF ANY SORT
OMNI GERRIT REVIEW
https://gerrit.omnirom.org/
DISCLAIMER:
No one is responsible for any damage done to your device but YOU. You've been warned.
XDA:DevDB Information
[ROM][XZS][P][9.0][WEEKLY]OmniROM, ROM for the Sony Xperia XZs
Contributors
oshmoun, humberos
Source Code: https://github.com/omnirom
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: latest stock ftf
Version Information
Status: Beta
Created 2019-03-17
Last Updated 2019-03-17
Click to expand...
Click to collapse
Great Work!! Thank you!
Is there dual sim Patch available? I'm yet to flash.
Updater process ended with error :7
Error installing zip. TWRP couldn't flash the zip. Says this device is Kagura but the zip device is named null.
jeoleo7 said:
Updater process ended with error :7
Error installing zip. TWRP couldn't flash the zip. Says this device is Kagura but the zip device is named null.
Click to expand...
Click to collapse
ah damn
thanks for hint
I'll fix it
jeoleo7 said:
Updater process ended with error :7
Error installing zip. TWRP couldn't flash the zip. Says this device is Kagura but the zip device is named null.
Click to expand...
Click to collapse
I think it's the TWRP device validation,there is a way to pass it
1187203317Q said:
I think it's the TWRP device validation,there is a way to pass it
Click to expand...
Click to collapse
yes it can be bypassed by modifying the zip, but let's make sure the assert works fine without that.
it's done now, next weekly will fix it.
jeoleo7 said:
Updater process ended with error :7
Error installing zip. TWRP couldn't flash the zip. Says this device is Kagura but the zip device is named null.
Click to expand...
Click to collapse
Maybe delete Model verification can install this
open zip
META-INF/com/google/android
open updater-script
Delete assert(…);
Try again
oshmoun said:
XZS/KEYAKI/G8231 OmniROM BUILDS
PIE 9.0
DOWNLOAD WEEKLY
REQUIREMENTS TO SUCCESSFULLY FLASH OMNIROM:
1. The device has the latest stock ftf
2. The device has an unlocked bootloader
3. The ODM image zip has been downloaded from HERE, and the ODM image has been extracted from it
4. The WEEKLY zip file has been downloaded and copied to the device
INSTALLATION INSTRUCTIONS:
1. Reboot device to fastboot mode, and flash the ODM image with this command
Code:
fastboot flash oem <ODM image>
2. Reboot device to TWRP and flash the WEEKLY zip file
3. (Optional) Flash a gapps package
4. Reboot device to system
CURRENT ISSUES ON OFFICIAL:
1. Device wakes up by itself every 5 seconds, reason unknown
2. Camera quality is suboptimal
KERNEL SOURCE: https://github.com/omnirom/android_kernel_sony_msm/tree/android-9.0
BUG REPORTS
REPORT BUGS ONLY:
- AFTER A CLEAN INSTALL
- USING STOCK OMNI KERNEL
- NO MODS OF ANY SORT
OMNI GERRIT REVIEW
https://gerrit.omnirom.org/
DISCLAIMER:
No one is responsible for any damage done to your device but YOU. You've been warned.
XDA:DevDB Information
[ROM][XZS][P][9.0][WEEKLY]OmniROM, ROM for the Sony Xperia XZs
Contributors
oshmoun, humberos
Source Code: https://github.com/omnirom
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: latest stock ftf
Version Information
Status: Beta
Created 2019-03-17
Last Updated 2019-03-17
Click to expand...
Click to collapse
(first of all I want to apologize for my bad English, because I'm Brazilian)
Can someone explain me the installation tutorial in an easier way, please, I am new to this platform, some things I could not understand in this tutorial in the install part of the kernel.
Thank you...
bug：no sound in the handset
All is good with mine.
Everything is working so far.
omni-9-20190324-keyaki-WEEKLY is working with SW_binaries_for_Xperia_Android_9.0_2.3.2_v6_tone.img
but SIM card is not working with SW_binaries_for_Xperia_Android_9.0_2.3.2_v7_tone.img
oshmoun said:
XZS/KEYAKI/G8231 OmniROM BUILDS
PIE 9.0
DOWNLOAD WEEKLY
REQUIREMENTS TO SUCCESSFULLY FLASH OMNIROM:
1. The device has the latest stock ftf
2. The device has an unlocked bootloader
3. The ODM image zip has been downloaded from HERE, and the ODM image has been extracted from it
4. The WEEKLY zip file has been downloaded and copied to the device
INSTALLATION INSTRUCTIONS:
1. Reboot device to fastboot mode, and flash the ODM image with this command
Code:
fastboot flash oem <ODM image>
2. Reboot device to TWRP and flash the WEEKLY zip file
3. (Optional) Flash a gapps package
4. Reboot device to system
CURRENT ISSUES ON OFFICIAL:
1. Device wakes up by itself every 5 seconds, reason unknown
2. Camera quality is suboptimal
KERNEL SOURCE: https://github.com/omnirom/android_kernel_sony_msm/tree/android-9.0
BUG REPORTS
REPORT BUGS ONLY:
- AFTER A CLEAN INSTALL
- USING STOCK OMNI KERNEL
- NO MODS OF ANY SORT
OMNI GERRIT REVIEW
https://gerrit.omnirom.org/
DISCLAIMER:
No one is responsible for any damage done to your device but YOU. You've been warned.
XDA:DevDB Information
[ROM][XZS][P][9.0][WEEKLY]OmniROM, ROM for the Sony Xperia XZs
Contributors
oshmoun, humberos
Source Code: https://github.com/omnirom
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: latest stock ftf
Version Information
Status: Beta
Created 2019-03-17
Last Updated 2019-03-17
Click to expand...
Click to collapse
Bugs: the cellphone is resetting itself after the boot, the microphone does not work in some applications, and the calls are muted!
Just one more question...
Why are videos on YouTube not at 60fps?
I am using G8232 and the sim does not work
Just Try It, hire what i got...
my devices g8232 + omni-9-20190407-keyaki-WEEKLY.zip + SW_BINARIES_FOR_XPERIA_ANDROID_9.0_2.3.2_V7_TONE.ZIP
- Simcard not detected
- when screen on idle (no interaction with my finger), after a minute its got freeze and self restart .... but not when i dont let screen idle its not get freeze
- after flashing gapps seems stock camera not working, but when i try google camera from play store it is working fine
- wifi just fine
- not test other function yet, device got hot and i go back to stock rom now...
****sory for my bad english,
COuld you please build for Dual SIM...
Cause it cant detect any SIM Card in any slots...
I have try dsds_patch from XZ forum and its doesnot work at all...
or if u have link or guide to make g8232 detect SIM, give me teh link.
just updated the trees to the latest from upstream.
starting from next weekly, you all MUST flash v8 odm.
Hello everyone,
I tried to install omni-9-20190421-keyaki-WEEKLY. Updater process ended with error :7 "Error installing zip. Says this device is Kagura. After deleting the "assert" in the updater-script the system came up after several reboots (took a lot of patience). But the phone app crashed instantly. The reboot ended up in a boot loop. I had to go back to omni-8.1.0-20180812-keyaki-WEEKLY what works great.
Is this rom stable enough for everyday use? I'm looking forward to this.
@oshmoun
Error installing zip. TWRP couldn't flash the zip. Says this device is Kagura..
i was try omni-9-20190714-keyaki-WEEKLY.zip + SW_BINARIES_FOR_XPERIA_ANDROID_9.0_2.3.2_V9_TONE.ZIP
its updated to V9?
And also error 7 is showing.
Android Open Source Project android-11.0.0_r46Disclaimer:* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
Instruction:
Unlock boot loader
Connect the device to your computer in Fastboot mode (by pressing volume up while inserting the USB cable)
Download and extract the vendor image provided by Sony
Flash the vendor image provided by Sony
Code:
fastboot flash oem SW_binaries_for_Xperia_Android_11_4.14_v8a_yoshino.img
Download and extract AOSP image android-11.0.0_r46.zip
Flash the boot, recovery, system, vendor and userdata images
Code:
fastboot flash boot boot.img
Code:
fastboot flash recovery recovery.img
Code:
fastboot flash system system.img
Code:
fastboot flash vendor vendor.img
Code:
fastboot flash userdata userdata.img
Code:
fastboot reboot
DONE!
If you have any problem with this recovery image, then download and flash the latest TWRP recovery release.
What's working:
Wifi
Hotspot
Bluetooth
GPS
4G/3G/2G
Camera
Fingerprint sensor (work without press the button)
BUGS:
TWRP recovery goes into bootloop, so start twrp again you need to flash the userdata.img (factory reset) via fastboot. There is this twrp recovery here on xda link.
Screen lag
After each start / restart the screen must be turned off and on again get to the homescreen
Credits:
Sony Xperia Developer World
Source code:
GitHub
Info:
ROM OS Version: Android 11
ROM Release: android-11.0.0_r46
ROM Kernel: Linux 4.14
Based On: AOSP
Status: Testing
Created 2022-02-14
Last Updated 2022-02-17
Reserved
bugs?
nathankaunang said:
bugs?
Click to expand...
Click to collapse
I am currently testing the build, as soon as I find bugs I will report them. If you have specific requests to test, please propose them. At the moment everything seems to be working fine.
D_Riccardo said:
I am currently testing the build, as soon as I find bugs I will report them. If you have specific requests to test, please propose them. At the moment everything seems to be working fine.
Click to expand...
Click to collapse
I mean, are the laggy screen bug or the green camera, or the signal drops bugs fixed?
JimKatsanos said:
I mean, are the laggy screen bug or the green camera, or the signal drops bugs fixed?
Click to expand...
Click to collapse
The screen lags slightly, the camera work perfect and for now I did not see any signal drops
Hi, the bugs I found:
- after each start / restart the screen must be turned off and on again get to the homescreen
- SIM card is not detected at all
hihiman1 said:
Hi, the bugs I found:
- after each start / restart the screen must be turned off and on again get to the homescreen
- SIM card is not detected at all
Click to expand...
Click to collapse
Thank you, I have also encountered that problem of the screen at startup. The sim card not detected it's strange I tested the data traffic and it works. I think this kernel 4.14 has more problems than the 4.4.
D_Riccardo said:
...The sim card not detected it's strange I tested the data traffic and it works. I think this kernel 4.14 has more problems than the 4.4.
Click to expand...
Click to collapse
Maybe it's linked to the latest version of SW_binaries_for_Xperia_Android_11_4.14_v9a_yoshino.zip (released 15.02.2022) v8a is no longer available
hihiman1 said:
Maybe it's linked to the latest version of SW_binaries_for_Xperia_Android_11_4.14_v9a_yoshino.zip (released 15.02.2022) v8a is no longer available
Click to expand...
Click to collapse
Yes, I see they updated the .zip file on the official site, luckily I didn't delete the file I used, I uploaded the v8a version here: https://www.udrop.com/6n1x/SW_binaries_for_Xperia_Android_11_4.14_v8a_yoshino.zip
Let me know if at least solved the problem with the sim card, so I will update the link in the post.
D_Riccardo said:
Yes, I see they updated the .zip file on the official site, luckily I didn't delete the file I used, I uploaded the v8a version here: https://www.udrop.com/6n1x/SW_binaries_for_Xperia_Android_11_4.14_v8a_yoshino.zip
Let me know if at least solved the problem with the sim card, so I will update the link in the post.
Click to expand...
Click to collapse
Yes now it works - please add the link to SW_binaries also in the 1st post
Wouldn't it be said to install the rom on the g8343?
Ramfisrd said:
Wouldn't it be said to install the rom on the g8343?
Click to expand...
Click to collapse
I would not risk to install to g8343, it could work as not