This is CM13.0 (Lollipop, Android 6.0.1) firmware for Moto MAXX XT1225 and Droid Turbo XT1254. It's an official build.
Maintainers: Skrilax_CZ
Credits: CyanogenMod Team
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Known bugs
Wake by voice support not tested and has unknown status
VoLTE is not supported on Verizon
Source
Device: https://github.com/CyanogenMod/android_device_motorola_quark
Kernel: https://github.com/CyanogenMod/android_kernel_motorola_apq8084
Unlocked bootloader required!
Flash over latest Lollipop or Marshmallow stock SW or flash the following packages to update bootloader & radio (do not downgrade them)!
Radio & Bootloader packages
XT1225 6.0.1 RETBR (MPG24.107-70.2): http://skrilax.droid-developers.org/cm13quark/QUARK_RETBR_601_RADIO_AND_BOOTLOADER_PACKAGE.zip
XT1225 6.0.1 RETEU INDIA (MPG24.107-70.2): http://skrilax.droid-developers.org/cm13quark/QUARK_RETEU_601_RADIO_AND_BOOTLOADER_PACKAGE.zip
========================================================================================================================
XT1250 5.0.2 LRA (LXG22.33-12.27): http://skrilax.droid-developers.org/cm12quark/QUARK_LRA_502_RADIO_AND_BOOTLOADER_PACKAGE.zip
========================================================================================================================
XT1254 5.1 VERIZON (SU4TL-44_44): http://skrilax.droid-developers.org/cm12quark/QUARK_VRZ_511_SU4_RADIO_AND_BOOTLOADER_PACKAGE.zip
Flash steps after you extract the zip:
Code:
adb reboot bootloader
mfastboot flash partition gpt.bin
mfastboot flash motoboot bootloader.img
mfastboot flash radio radio.img
Crossflashing & Configuration Override
You can crossflash radio image for a different variant of the phone, but the automated setup will not pick it up. Thus you'll need to manually override it through fastboot:
Code:
To enable autodetection:
fastboot oem config fsg-id ""
----------------------------------------
Moto Turbo XT1225:
fastboot oem config fsg-id emea
----------------------------------------
Moto MAXX XT1225:
fastboot oem config fsg-id singlela
----------------------------------------
Moto MAXX XT1250:
fastboot oem config fsg-id lra
----------------------------------------
Moto MAXX XT1250 - but set as GSM phone:
fastboot oem config fsg-id lra_gsm
----------------------------------------
Droid TURBO XT1254:
fastboot oem config fsg-id verizon
----------------------------------------
Droid TURBO XT1254 - but set as GSM phone:
fastboot oem config fsg-id verizon_gsm
Download
ROM & Recovery: http://download.cyanogenmod.org/?device=quark
GAPPS: http://opengapps.org/?api=6.0
Download link just shows 12.1
Grynch13 said:
Download link just shows 12.1
Click to expand...
Click to collapse
It'll be up within 24 hours when jenkins builds it.
Good stuff here man. Downloading now
Installed. Looks sweet. Will fw be upgraded to latest build via OTA?
Sweet
Skrilax_CZ said:
This is CM13.0 (Lollipop, Android 6.0.1) firmware for Moto MAXX XT1225 and Droid Turbo XT1254. It's an official build.
Click to expand...
Click to collapse
Thank you for posting in the Droid Turbo forums as well. I created a thread here to help people know that development has been taking place in the Moto Maxx forums much more than here, but you posting this stands out much more. Thanks for your work in this and making sure both phone owners are aware of the official release .
crash2032 said:
Installed. Looks sweet. Will fw be upgraded to latest build via OTA?
Click to expand...
Click to collapse
I will create radio & BL package once for manual flash when it's released.
If I already have TWRP and an earlier CM13 (20160331-UNOFFICIAL), can I just flash over it?
impala454 said:
If I already have TWRP and an earlier CM13 (20160331-UNOFFICIAL), can I just flash over it?
Click to expand...
Click to collapse
Think so. At least I did to by myself
Sent by me using my fingers
That worked. I went ahead and attempted to flash the bootloader & radio and got the error "Preflash validation failed" for partition and bootloader, but the radio one worked.
edit: Even though the radio flash worked, it still borked my cell connection. I reflashed all three from here.
impala454 said:
If I already have TWRP and an earlier CM13 (20160331-UNOFFICIAL), can I just flash over it?
Click to expand...
Click to collapse
Didn't work for me. Flashed over that build and got the little Cyanogenmod boot alien for over 15 minutes.
XMatrix2X said:
Didn't work for me. Flashed over that build and got the little Cyanogenmod boot alien for over 15 minutes.
Click to expand...
Click to collapse
I had the same thing, even after doing a full wipe and reflashing.
Startup wizard conflict and ambient display not working
Thanks for the rom.
I was tried to upgrade by OTA from 12.1 but the Google Play Services get stopped loop.
After that I flash the clean cm13 rom, the startup wizard come from cm13 works perfectly, but when gapps installed it get stuck at Google Initial Startup Wizard.
The problem solved after I wipe factory reset and boot again.
The rom is clean, fast and smooth but the first thing I relized that the Ambient Display not working even the option was turned on.
Is there anyone have the same problem like me?
Cannot install the motorola camera from the play store on this
lonewitness said:
Cannot install the motorola camera from the play store on this
Click to expand...
Click to collapse
flashable zip for camera and gallery here:
http://forum.xda-developers.com/mot...anogenmod-moto-camera-gallery-cm12-1-t3124744
@Skrilax_CZ can you please include the motorola-specific play store props and permissions allowing the us to install Moto apps via Playstore?
@XMatrix2X Got it to work by using 'open_gapps-arm-6.0-nano-20160409', and then factory resetting after the first boot (to solve the setup problem mentioned by @konan767).
konan767 said:
TThe rom is clean, fast and smooth but the first thing I relized that the Ambient Display not working even the option was turned on.
Is there anyone have the same problem like me?
Click to expand...
Click to collapse
After turning on Ambient Display, you have to set what exactly you want Ambient Display to do. There's various options in Gestures and in Notifications. It's not just one switch. Three different places for all the Ambient Display-related settings. Just like CM Lollipop. Go here and look at screenshots:
http://forum.xda-developers.com/showpost.php?p=66024940&postcount=225
ChazzMatt said:
After turning on Ambient Display, you have to set what exactly you want Ambient Display to do. There's various options in Gestures and in Notifications. It's not just one switch. Three different places for all the Ambient Display-related settings. Just like CM Lollipop. Go here and look at screenshots:
http://forum.xda-developers.com/showpost.php?p=66024940&postcount=225
Click to expand...
Click to collapse
In my case, the Ambient Display option turned On an everything related to it in Settings already have been set, but the screen did not responsed when I waving hand front of the sensor or pickup the phone.
Although the other actions works ok(double twist, chop chop)
Should I reflash the rom again?
Related
I've built a TWRP recovery for the 2015 Moto E 3G. This model is also known as Styx 3G, and has the codename otus.
3G model only! If you have the LTE model, use my LTE recovery instead.
Downloads are available on the downloads tab. In case you encounter any issues, I've also posted the stock recovery for otus on the downloads tab.
To try it out without flashing, run:
Code:
fastboot boot twrp.img
To flash it:
Code:
fastboot flash recovery twrp.img
Try at your own risk. I expect everything to work, but I make no guarantees.
I would like to thank cybojenix for creating the first-gen Moto E recovery. I used his device tree as a reference when creating mine.
Device Tree: https://github.com/sultanqasim/android_device_motorola_otus/tree/twrp
Kernel: https://github.com/sultanqasim/android_kernel_motorola_otus/tree/twrp
XDA:DevDB Information
TWRP for Moto E 3G (2015), Tool/Utility for the Moto E 2015
Contributors
squid2, cybojenix
Source Code: https://github.com/sultanqasim/android_device_motorola_otus
Version Information
Status: Stable
Current Stable Version: 3.2.3-r1
Stable Release Date: 2018-08-16
Created 2015-04-17
Last Updated 2018-08-16
Reserved
My initial test release is up. Try it at your own risk, I don't know what works and what doesn't. All I know is that it can boot and see the on board storage. Thanks to @Ravx and @Hakkinukai for initial testing. If you want to stay safe, don't flash anything with it until I'm able to confirm that it works properly. I'm still waiting on my test unit to arrive.
For the adventurous, try it out and let me know what works and what doesn't. Be careful though, it's untested and could mess up your device. I'm not responsible for any problems it may cause you.
squid2 said:
My initial test release is up. Try it at your own risk, I don't know what works and what doesn't. All I know is that it can boot and see the on board storage. Thanks to @Ravx and @Hakkinukai for initial testing. If you want to stay safe, don't flash anything with it until I'm able to confirm that it works properly. I'm still waiting on my test unit to arrive.
For the adventurous, try it out and let me know what works and what doesn't. Be careful though, it's untested and could mess up your device. I'm not responsible for any problems it may cause you.
Click to expand...
Click to collapse
Further test results:
1.) Was able to succesfully backup my system with the recovery.
2.) wiping data gave error ( error code 255 i think ) but the data was still gone and the device got factory reset.
3.) Succesfully restored the data from the created backup.
will try to flash SuperSu now.:good::good:
Edit: The device is Successfuly rooted.
Here is the Screenshot of Successful Root.:good::good::good::good:
Bro i have created a saperate Guide for rooting. I hope you dont mind.
Glad to hear that it is mostly working. I'll look into the data wiping error when I get my test device.
Thank you very much squid
i try this command 'fastboot boot twrp-otus-2.8.6-test3.img'
and in first attempt , i got TEAMWIN screen on successful boot MOTO E 2nd Generation.
and from install option ,i install SuperSU from my internal memory.
and my device rooted successfully.
you are :angel:
:victory:
I've posted a new version (2.8.6-test4). This new version solves a problem that prevented my recovery from booting from flash storage. It's also smaller. Thanks to @Hakkinukai for testing.
You can safely flash this recovery to your device by doing
Code:
fastboot flash recovery twrp-otus-2.8.6-test4.img
I make no promises about reliability, but I'd expect most things to work. Use this at your own risk, I'm not responsible for bricking your device. I haven't tested this myself.
To avoid confusion, I've removed the old version (2.8.6-test3) from the downloads tab.
Thank you very much, I could finally rooting my moto E,
#Off topic could please make a version updated for the moto E first generation, the current version is 2.7.1.0 and the latest versions have many bugs,
squid2 said:
I've posted a new version (2.8.6-test4). This new version solves a problem that prevented my recovery from booting from flash storage. It's also smaller. Thanks to @Hakkinukai for testing.
You can safely flash this recovery to your device by doing
Code:
fastboot flash recovery twrp-otus-2.8.6-test4.img
I make no promises about reliability, but I'd expect most things to work. Use this at your own risk, I'm not responsible for bricking your device. I haven't tested this myself.
To avoid confusion, I've removed the old version (2.8.6-test3) from the downloads tab.
Click to expand...
Click to collapse
Thanks bro. I will flash and report back :good::good:
Is flashing the new recovery working for you guys. If yes I will update the rooting thread so that the method becomes more easy.
great work man
Ravx said:
Is flashing the new recovery working for you guys. If yes I will update the rooting thread so that the method becomes more easy.
Click to expand...
Click to collapse
The new recovery is working just fine for me, but i cant boot into recovery mode manually, i have to use a third party app either quick boot or apm+.
other than that everything works good.
raghavarora1997 said:
The new recovery is working just fine for me, but i cant boot into recovery mode manually, i have to use a third party app either quick boot or apm+.
other than that everything works good.
Click to expand...
Click to collapse
By booting manually, I presume you mean selecting it from the bootloader menu with the volume keys. What happens when you try that? I've had others report that it works.
squid2 said:
By booting manually, I presume you mean selecting it from the bootloader menu with the volume keys. What happens when you try that? I've had others report that it works.
Click to expand...
Click to collapse
After selecting recovery from the bootloader black screen comes and nothing happens. I've tried it many times with no success.
Sent from my MotoE2 using XDA Free mobile app
raghavarora1997 said:
After selecting recovery from the bootloader black screen comes and nothing happens. I've tried it many times with no success.
Sent from my MotoE2 using XDA Free mobile app
Click to expand...
Click to collapse
Hmm, so it goes black right away and doesn't show the boot logo or unlocked boot loader warning. Strange.
Are you sure that you flashed it correctly? Is anyone else having this issue?
squid2 said:
Hmm, so it goes black right away and doesn't show the boot logo or unlocked boot loader warning. Strange.
Are you sure that you flashed it correctly? Is anyone else having this issue?
Click to expand...
Click to collapse
Yeah I'm sure I've flashed it correctly.
And yes it goes back right away. Still I will flash or again, just to be sure and then report back.
UPDATE: After flashing again I can boot into recovery manually.
Sent from my MotoE2 using XDA Free mobile app
The utterly incompetent Canada Post decided to lose my Moto E 3G. Their customer service was very unhelpful and just told me to contact the sender, and ask them to start a trace with the USPS. Traces take 3 weeks and often get nowhere. This is the fifth package to me that Canada Post has lost in the past two years. On average, I've found that 1 in 5 packages sent to me via Canada Post get lost. That is quite ridiculous, but they are a taxpayer funded government monopoly with no sense of customer service.
In addition to contacting the sender, as a last resort, I've taped a notice inside my mailbox to ask the mailman/woman if they know what they did to my parcel. God knows if I'll ever get it.
Anyway, enough of a rant for now. I'm furious that they lost a package that I spent $200 on (with taxes, shipping, markup etc.)
Due to you, this tut was possible @ http://androidmtk.com/root-motorola-moto-e-3g-2015
Good news! My Moto E was delivered to the wrong address by Canada Post, but the people who received it brought it to me yesterday. I've started looking into porting CM12.1 to otus, though it will probably be a week or so before I have something to show.
I Find some bugs:
1) The USB-OTG don't work (don't mounts)
2) adb sideload don't work (don't finds device)
3) strong button vibration (the default is 80, but 20 is ideal)
Hey Guys,
I'm new here and have an huge problem. I've tried Cyanogenmod on my phone for a couple of months. Today I've tried to flash the stock ROM from Motorola, which was successful. But as I tried to flash another version (which is a later build as the ROM which I've flashed before) of the Stock ROM from Motorola, there was an error. Currently I don't have any system installed and can't flash any ROM because I've locked the Bootloader. I can't unlock the Bootloader because for this I need to have a ROM installed. Every time I try to unlock the Bootloader my phone says "allow oem unlock". The main problem is, that I don't have an Nandroid Backup.. I know this was very very dumb, but I'm new in flashing ROMs to a Smartphone.
Thanks for replies.
I have the Motorola Moto E 2.Generation 4G/LTE
Tobeey said:
Hey Guys,
I'm new here and have an huge problem. I've tried Cyanogenmod on my phone for a couple of months. Today I've tried to flash the stock ROM from Motorola, which was successful. But as I tried to flash another version (which is a later build as the ROM which I've flashed before) of the Stock ROM from Motorola, there was an error. Currently I don't have any system installed and can't flash any ROM because I've locked the Bootloader. I can't unlock the Bootloader because for this I need to have a ROM installed. Every time I try to unlock the Bootloader my phone says "allow oem unlock". The main problem is, that I don't have an Nandroid Backup.. I know this was very very dumb, but I'm new in flashing ROMs to a Smartphone.
Thanks for replies.
I have the Motorola Moto E 2.Generation 4G/LTE
Click to expand...
Click to collapse
What carrier are you using?
Sent from my Virgin Mobile Moto E via CM 13
O2/Telefonica Germany
..
Flash whole image or the 5system image ..
Like
Fastboot flash system (drag the first part) enter
Fastbbot flash system (drag the 2nd ) enter
Like do rest 3 file
Then try
Haven't everybody another idea? The problem is only, that i don't have a ROM or any other system on my Motorola. The bootloader is locked and I can't unlocked them, because i don't can change the developer options.
Tobeey said:
Haven't everybody another idea? The problem is only, that i don't have a ROM or any other system on my Motorola. The bootloader is locked and I can't unlocked them, because i don't can change the developer options.
Click to expand...
Click to collapse
Rsd lite with the stock packages. That's the only way I know of.
Sent from my XT1526 using XDA-Developers mobile app
This is my version of TWRP built for the 2016 Moto G Play. It should work fine, but using it is a try at your own risk procedure. Your bootloader must be unlocked to use this recovery. Fastboot mode is used to flash or boot this recovery. To enter fastboot mode, turn off your device, hold PWR and VolDn for 3 seconds, then let go.
Differences between upstream TWRP and my fork:
My original green theme
No SuperSU
No TWRP app
No HTC Dumlock cruft
Updated pigz compressor (slightly faster and more tolerant of corruption)
To temporarily boot this recovery:
Code:
fastboot boot twrp.img
To permanently flash it:
Code:
fastboot flash recovery twrp.img
The download is up on the downloads tab.
XDA:DevDB Information
TWRP for Moto G Play (harpia), Tool/Utility for the Moto G4 Play
Contributors
squid2
Source Code: https://github.com/sultanqasim/android_device_motorola_harpia
Version Information
Status: Stable
Current Stable Version: 3.2.3-r1
Stable Release Date: 2018-08-16
Created 2016-09-03
Last Updated 2018-08-16
Thank you so much for your support. TWRP works perfectly. Although after installing SuperSU, the device doesn't boot. This happened to me on several other devices as well and I don't really understand why it sometimes works and sometimes it doesn't. Any help is appreciated
I even tried the latest beta 2.77 without success.
Rotkaeqpchen said:
Thank you so much for your support. TWRP works perfectly. Although after installing SuperSU, the device doesn't boot. This happened to me on several other devices as well and I don't really understand why it sometimes works and sometimes it doesn't. Any help is appreciated
I even tried the latest beta 2.77 without success.
Click to expand...
Click to collapse
Good to know. Thanks again squid2! Quick question, how is the SOT of this device? A lot better than the Moto G3 I'm right?
Another thing: cam anyone use the aida64 app and find the camera Id (sensors) for the rear?
Rotkaeqpchen said:
Thank you so much for your support. TWRP works perfectly. Although after installing SuperSU, the device doesn't boot. This happened to me on several other devices as well and I don't really understand why it sometimes works and sometimes it doesn't. Any help is appreciated
I even tried the latest beta 2.77 without success.
Click to expand...
Click to collapse
any sucess on root bro ?
i want root moto play
Anyone knows pls suggest me
First, a big thanks to squid2. TWRP works perfectly!
charutl said:
Anyone knows pls suggest me
Click to expand...
Click to collapse
1. Install Twrp
2. Back up your phone, just to be safe.
3. Install Automatic flashable zip fix for supersu! - http://forum.xda-developers.com/g4-play/development/automatic-flashable-zip-fix-supersu-t3464396
4. Install SuperSU: https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.78-201609011115.zip
Reboot your phone. Worked for me 1st time. The phone may restart several times.
mx597turbo said:
First, a big thanks to squid2. TWRP works perfectly!
1. Install Twrp
2. Back up your phone, just to be safe.
3. Install Automatic flashable zip fix for supersu! - http://forum.xda-developers.com/g4-play/development/automatic-flashable-zip-fix-supersu-t3464396
4. Install SuperSU: https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.78-201609011115.zip
Reboot your phone. Worked for me 1st time. The phone may restart several times.
Click to expand...
Click to collapse
Thanks for your reply & Is this restart problem temporary or permanent???
charutl said:
Thanks for your reply & Is this restart problem temporary or permanent???
Click to expand...
Click to collapse
After installing supersu, the phone restarted from the warning screen once. After that, the phone booted fine.
Amazon version
Safe to assume this does not work for the Amazon version?
Amirusownsu said:
Safe to assume this does not work for the Amazon version?
Click to expand...
Click to collapse
We can't unlock the bootloader
Will this work for the 1601 bell variant? I would think it should as it is a g4 play non Amazon version. At least o would have root till till custom Roms are available. Hey Squid2, great work so far. Is there a way I could send the code for the radio? Kinda of a noob with that aspect.
Ok so i went ahead and did the steps and we have success! xt1601 moto g play is rooted and ready to roll!
Rotkaeqpchen said:
Thank you so much for your support. TWRP works perfectly. Although after installing SuperSU, the device doesn't boot. This happened to me on several other devices as well and I don't really understand why it sometimes works and sometimes it doesn't. Any help is appreciated
I even tried the latest beta 2.77 without success.
Click to expand...
Click to collapse
I Tried this and it worked for me -
http://www.techjit.com/how-to-root-moto-g4-play/
give it a try.
TWRP and Root working on G play
First of all thanks to squid2 , Thanks to this video... I successfully Installed TWRP and Rooted my G4 Play !
Hello and tried to install the recovery and I get this error: error: can not open'twrp.img 'say I have the bootloader unlocked, please help ,xt1602 moto g4 play
nick more said:
Hello and tried to install the recovery and I get this error: error: can not open'twrp.img 'say I have the bootloader unlocked, please help ,xt1602 moto g4 play
Click to expand...
Click to collapse
Rename file to twrp
It works on dual?
All baloney my bootloader isn't eligible ...
Sent from my XT1609 using XDA Free mobile app
How did you guys unlock the bootloader? I have the xt1607 on us cellular and when I type in the unlock data on moto site it says that it's not eligible. I got the phone from the US cellular store. Any help would be great.
Edit: nevermind I got it to go through.
squid2 said:
I've ported TWRP to the new 2016 Moto G Play. It should work when you flash it, but using it is still a try at your own risk procedure. Your bootloader must be unlocked to use this recovery. Fastboot mode is used to flash or boot this recovery. To enter fastboot mode, turn off your device, hold PWR and VolDn for 3 seconds, then let go.
To temporarily boot this recovery:
To permanently flash it:
The download is up on the downloads tab.
XDA:DevDB Information
TWRP for Moto G Play (harpia), Tool/Utility for the Moto G4 Play
Contributors
squid2
Source Code:https://github.com/sultanqasim/android_device_motorola_harpia
Version Information
Status: Stable
Current Stable Version: 3.0.2-r4
Stable Release Date: 2016-09-02
Created 2016-09-03
Last Updated 2016-09-02
Click to expand...
Click to collapse
Is this working for xt1607 version? Never mind I got it. Works great squid. Is there a boot logo for this yet?
AOSP 13
This is a moto-common project release under the codename borneo
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
What's Moto-Common?
Moto-Common is a set of trees common to every 4.14+ QCOM Motorola device, making it easier to do bringups based on SODP.
What's AOSP?
AOSP is Android as Google publish without other modifications.
Known issues:
You tell me
IF YOU DONT HAVE SLOT B FILLED YOU CAN BRICK
Instructions :
Download the latest build
Reboot to bootloader
Code:
fastboot -w
Code:
fastboot update PACKAGE.zip
You may need to install drivers in device manager after running the last command
Downloads :
Download
Telegram Groups
My chat
Source Code:
https://github.com/moto-common
Changelog:
Jan 25th 2023: Initial release on XDA
Feb 27th 2023: Pushed Feb update
June 19th 2023: Pushed June patch update
Fix fingerprint gestures for egis
Fix color mode listings
Fix aux cameras
Improve memory management
Improve Wi-Fi 5GHz strength
Numerous other changes
Hi I recently installed this as its the only ROM currently available for my phone that I've seen, and I'm just wondering how would someone go about installing gapps?
DefinitelyDetermined said:
Hi I recently installed this as its the only ROM currently available for my phone that I've seen, and I'm just wondering how would someone go about installing gapps?
Click to expand...
Click to collapse
I have no idea , I just build to provide a base for others to work off of mostly.
DefinitelyDetermined said:
Hi I recently installed this as its the only ROM currently available for my phone that I've seen, and I'm just wondering how would someone go about installing gapps?
Click to expand...
Click to collapse
@Electimon
See the following links:
- https://stackoverflow.com/questions/71001696/how-to-include-opengapps-in-aosp-12-build
Use tau instead of sigma for aosp-13 (in the notes at bottom checked answer)\
- https://github.com/opengapps/aosp_build
- https://www.droidwin.com/how-to-download-and-install-android-13-gapps/
Note: Requires a working TWRP
Does this rom bring unlimited google photos???
sdembiske said:
@Electimon
See the following links:
- https://stackoverflow.com/questions/71001696/how-to-include-opengapps-in-aosp-12-build
Use tau instead of sigma for aosp-13 (in the notes at bottom checked answer)\
- https://github.com/opengapps/aosp_build
- https://www.droidwin.com/how-to-download-and-install-android-13-gapps/
Note: Requires a working TWRP
Click to expand...
Click to collapse
Would an outdated twrp version work? There is an unofficial one for Android 11
@Electimon Do you know anything about "range restricted" in Firehose loaders for EDL?
It prevents you from reading (and probably writing?) most partitions in EDL.
If your CID is 0xff or if you have a flag set (which I haven't traced down yet) you can bypass the restriction.
Renate said:
@Electimon Do you know anything about "range restricted" in Firehose loaders for EDL?
It prevents you from reading (and probably writing?) most partitions in EDL.
If your CID is 0xff or if you have a flag set (which I haven't traced down yet) you can bypass the restriction.
Click to expand...
Click to collapse
Yeah thats known, sadly CID partition is signed and the flag is usually burned qfuse in the SoC which is burnt on all retail devices.
Electimon said:
... the flag is usually burned qfuse ...
Click to expand...
Click to collapse
I'm using the Firehose loader size=609,484, MD5=153a904c54963cb21b901b0dd10f0641
I can see that the CID is validated by cert chains.
But I also see lots of stuff like "ssm_flash_cid", "write_cid_store".
I see a bunch of smc (Secure Monitor Calls) and a bunch of SCM (Secure Channel Monitor) calls and functions for reading/writing fuses.
I also see one small function that writes a byte into memory that can disable restrictions.
It seems like a back door, but I haven't seen what activates it.
Would it be possible to use this device tree to make a pixel experience port?
LethalGamer2121 said:
Would it be possible to use this device tree to make a pixel experience port?
Click to expand...
Click to collapse
Yes
Feb 27th 2023: Pushed Feb update
Electimon said:
Feb 27th 2023: Pushed Feb update
Click to expand...
Click to collapse
sound isnt working after update. it started working after i downgraded to the jan release
DefinitelyDetermined said:
sound isnt working after update. it started working after i downgraded to the jan release
Click to expand...
Click to collapse
Thank you for letting me know, it will be fixed soon
DefinitelyDetermined said:
sound isnt working after update. it started working after i downgraded to the jan release
Click to expand...
Click to collapse
Please redownload the same link, ive updated it with the fixed package. Thank you
having an issue where I cant flash it, its saying that it cannot flash
>fastboot update aosp_borneo-img-Feb-Week4.zip-------------------------------- - Pastebin.com
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
pastebin.com
if you want to reach out to me quickly, DM me on discord, Merith#5829
merith-tk said:
having an issue where I cant flash it, its saying that it cannot flash
>fastboot update aosp_borneo-img-Feb-Week4.zip-------------------------------- - Pastebin.com
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
pastebin.com
if you want to reach out to me quickly, DM me on discord, Merith#5829
Click to expand...
Click to collapse
Use platform-tools r32, in the latest version google broke fastboot update.
Electimon said:
Use platform-tools r32, in the latest version google broke fastboot update.
Click to expand...
Click to collapse
Small problem, phone has fastbootd, bootloader, recovery, and system (system being rom)
when you tell the phone to boot to fastboot, it goes to fastbootd which does not show up in fastboot.exe's list,
but if I send it to bootloader, it shows up
Edit, Updating drivers fixed it, IOBit Driver notified of out of date driver
Electimon said:
Use platform-tools r32, in the latest version google broke fastboot update.
Click to expand...
Click to collapse
Still broken, just differently
It flashed, rebooted, showed the AOSP android boot animation, rebooted then brought me to stock recovery (TWRP not flashed) saying the system was corrupt and could not boot
Reflashing fixed it but I dont have Cell Service (I have an carrier unlocked device on USC network)
merith-tk said:
Still broken, just differently
It flashed, rebooted, showed the AOSP android boot animation, rebooted then brought me to stock recovery (TWRP not flashed) saying the system was corrupt and could not boot
Reflashing fixed it but I dont have Cell Service (I have an carrier unlocked device on USC network)
Click to expand...
Click to collapse
Wipe data in recovery and let me know if its still an issue
Hey XDA community, two weeks ago I purchased a Moto X40 from Aliexpress and it finally arrived yesterday. After going through some posts here, I successfully ported the Chinese ROM (retcn) to the European version (reteu). There might be easier and faster methods, but I'm sharing the one that worked for me.
Working features:
Unlock
NFC Payment
5G
OTA Update
Not yet tested:
Banking apps
Issues
- VPN, but you can check this comment for a fix
https://www.reddit.com/r/motorola/comments/zo38xu/_/j1u5t9l
Here's the step-by-step guide:
Ensure you have the latest version of fastboot installed.
Download the Motorola USB drivers: https://en-us.support.motorola.com/app/answers/detail/a_id/88481/~/where-can-i-download-the-usb-drivers-for-my-device?
Download the reteu ROM: https://mirrors.lolinet.com/firmware/motorola/rtwo/official/RETEU/
While the ROM is downloading, enable Developer mode and OEM Unlock on your device.
Follow the official Motorola bootloader unlock guide: https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
After unlocking the bootloader, extract the ROM file and return to fastboot mode.
Change to reteu by entering "fastboot oem config carrier reteu".
Download and install MotoFlashPro: https://forum.xda-developers.com/t/utility-motoflashpro.4252201/. Choose the flashfile.xml from the extracted ROM folder, and your phone will be flashed.
When the welcome screen appears, go back to fastboot mode and relock the bootloader using "fastboot oem lock".
That's it! I'm now enjoying the EU ROM on my Moto X40. I'll update this post after I activate 5G on my SIM, test banking apps, and check for any OTA updates (the latest security patch for this ROM is from February 2023).
I hope this helps some of you out there!
Cheers!
EDIT: 5G works!
EDIT 19/05: OTA Update received
GigogoHK said:
Hey XDA community, two weeks ago I purchased a Moto X40 from Aliexpress and it finally arrived yesterday. After going through some posts here, I successfully ported the Chinese ROM (retcn) to the European version (reteu). There might be easier and faster methods, but I'm sharing the one that worked for me.
Working features:
Unlock
NFC Payment
Not yet tested:
5G
OTA Updates
Banking apps
Here's the step-by-step guide:
Ensure you have the latest version of fastboot installed.
Download the Motorola USB drivers: https://en-us.support.motorola.com/app/answers/detail/a_id/88481/~/where-can-i-download-the-usb-drivers-for-my-device?
Download the reteu ROM: https://mirrors.lolinet.com/firmware/motorola/rtwo/official/RETEU/
While the ROM is downloading, enable Developer mode and OEM Unlock on your device.
Follow the official Motorola bootloader unlock guide: https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
After unlocking the bootloader, extract the ROM file and return to fastboot mode.
Change to reteu by entering "fastboot oem config carrier reteu".
Download and install MotoFlashPro: https://forum.xda-developers.com/t/utility-motoflashpro.4252201/. Choose the flashfile.xml from the extracted ROM folder, and your phone will be flashed.
When the welcome screen appears, go back to fastboot mode and relock the bootloader using "fastboot oem lock".
That's it! I'm now enjoying the EU ROM on my Moto X40. I'll update this post after I activate 5G on my SIM, test banking apps, and check for any OTA updates (the latest security patch for this ROM is from February 2023).
I hope this helps some of you out there!
Cheers!
Click to expand...
Click to collapse
There's a thread on the X30 Pro forum where someone confirmed banking + 5G works after converting to EU Model. So we're just waiting to see if OTA is working and if you can enable OEM Unlocking after relock. The guide is very helpful!
thank you guide.if this all working i am ready to buy x40，hope you can update this post.
GigogoHK said:
Hey XDA community, two weeks ago I purchased a Moto X40 from Aliexpress and it finally arrived yesterday. After going through some posts here, I successfully ported the Chinese ROM (retcn) to the European version (reteu). There might be easier and faster methods, but I'm sharing the one that worked for me.
Working features:
Unlock
NFC Payment
Not yet tested:
5G
OTA Updates
Banking apps
Here's the step-by-step guide:
Ensure you have the latest version of fastboot installed.
Download the Motorola USB drivers: https://en-us.support.motorola.com/app/answers/detail/a_id/88481/~/where-can-i-download-the-usb-drivers-for-my-device?
Download the reteu ROM: https://mirrors.lolinet.com/firmware/motorola/rtwo/official/RETEU/
While the ROM is downloading, enable Developer mode and OEM Unlock on your device.
Follow the official Motorola bootloader unlock guide: https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
After unlocking the bootloader, extract the ROM file and return to fastboot mode.
Change to reteu by entering "fastboot oem config carrier reteu".
Download and install MotoFlashPro: https://forum.xda-developers.com/t/utility-motoflashpro.4252201/. Choose the flashfile.xml from the extracted ROM folder, and your phone will be flashed.
When the welcome screen appears, go back to fastboot mode and relock the bootloader using "fastboot oem lock".
That's it! I'm now enjoying the EU ROM on my Moto X40. I'll update this post after I activate 5G on my SIM, test banking apps, and check for any OTA updates (the latest security patch for this ROM is from February 2023).
I hope this helps some of you out there!
Cheers!
Click to expand...
Click to collapse
Yup, can confirm EU ROM is working great with my 12/512GB Moto X40
Magisk works and SafetyNet passes as well
I tried 5G today and I get 200mbps, definetly an improvement over my previous Snapdragon 888
GigogoHK said:
Hey XDA community, two weeks ago I purchased a Moto X40 from Aliexpress and it finally arrived yesterday. After going through some posts here, I successfully ported the Chinese ROM (retcn) to the European version (reteu). There might be easier and faster methods, but I'm sharing the one that worked for me.
Working features:
Unlock
NFC Payment
5G
Not yet tested:
OTA Updates
Banking apps
Here's the step-by-step guide:
Ensure you have the latest version of fastboot installed.
Download the Motorola USB drivers: https://en-us.support.motorola.com/app/answers/detail/a_id/88481/~/where-can-i-download-the-usb-drivers-for-my-device?
Download the reteu ROM: https://mirrors.lolinet.com/firmware/motorola/rtwo/official/RETEU/
While the ROM is downloading, enable Developer mode and OEM Unlock on your device.
Follow the official Motorola bootloader unlock guide: https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
After unlocking the bootloader, extract the ROM file and return to fastboot mode.
Change to reteu by entering "fastboot oem config carrier reteu".
Download and install MotoFlashPro: https://forum.xda-developers.com/t/utility-motoflashpro.4252201/. Choose the flashfile.xml from the extracted ROM folder, and your phone will be flashed.
When the welcome screen appears, go back to fastboot mode and relock the bootloader using "fastboot oem lock".
That's it! I'm now enjoying the EU ROM on my Moto X40. I'll update this post after I activate 5G on my SIM, test banking apps, and check for any OTA updates (the latest security patch for this ROM is from February 2023).
I hope this helps some of you out there!
Cheers!
EDIT: 5G works!
Click to expand...
Click to collapse
You can connect a vpn since the option in settings about the vpn does not appear on my device Where is the data saving below, the option about the vpn should appear but in the capture that command does not appear
I tried to run today Cloudflare Warp and noticed the VPN option is not available. I've read somewhere it could be a bug or it needs to activate the multiuser option. I'll research it further
April security patch with reteu rom and closed bootloader The vpn thing has not been corrected, hopefully there is a solution to this
ziggmax said:
April security patch with reteu rom
Click to expand...
Click to collapse
I'm still in February, no OTA update yet. I created a multiuser account and can see the VPN option. It's something related to Google Apps Account security policies ?
ziggmax said:
You can connect a vpn since the option in settings about the vpn does not appear on my device Where is the data saving below, the option about the vpn should appear but in the capture that command does not appear
Click to expand...
Click to collapse
GigogoHK said:
I tried to run today Cloudflare Warp and noticed the VPN option is not available. I've read somewhere it could be a bug or it needs to activate the multiuser option. I'll research it further
Click to expand...
Click to collapse
Have you tried accessing VPN settings using an activity manager such as Shortcut Maker?
TheMystic said:
Have you tried accessing VPN settings using an activity manager such as Shortcut Maker?
Click to expand...
Click to collapse
If I already tried with that app but it won't let me add the apps
GigogoHK said:
I tried to run today Cloudflare Warp and noticed the VPN option is not available. I've read somewhere it could be a bug or it needs to activate the multiuser option. I'll research it further
Click to expand...
Click to collapse
I did that too but it won't let me install apps outside of chrome but it's annoying that to use a vpn you have to enable multi-user Hopefully they will fix it soon with an update.
ziggmax said:
If I already tried with that app but it won't let me add the apps
Click to expand...
Click to collapse
Try installing a VPN app like Netguard or a real VPN.
ziggmax said:
I did that too but it won't let me install apps outside of chrome but it's annoying that to use a vpn you have to enable multi-user Hopefully they will fix it soon with an update.
Click to expand...
Click to collapse
Not sure what you mean by 'won't let me install apps outside of Chrome'.
VPN has nothing to do with multi-user feature.
I managed to fix the VPN issue without the multi user setting, check the video of this comment
https://www.reddit.com/r/motorola/comments/zo38xu/_/j1u5t9l
GigogoHK said:
I managed to fix the VPN issue without the multi user setting, check the video of this comment
https://www.reddit.com/r/motorola/comments/zo38xu/_/j1u5t9l
Click to expand...
Click to collapse
This method worked perfectly for me
The uncertain about having OTA updates and the disappointment of the camera are making me consider switching to another phone
GigogoHK said:
The uncertain about having OTA updates and the disappointment of the camera are making me consider switching to another phone
Click to expand...
Click to collapse
The camera doesn seem unable to focus when scanning QRs. I haven't done much photo taking yet.
Zechosenjuan said:
The camera doesn seem unable to focus when scanning QRs. I haven't done much photo taking yet.
Click to expand...
Click to collapse
I have problems with autofocus on recording videos aa well
Just received this OTA, update and installed successfully.
- Autofocus improved
- VPN dialog still not available (need to use tools)
GigogoHK said:
Just received this OTA, update and installed successfully.
- Autofocus improved
- VPN dialog still not available (need to use tools)
View attachment 5913631
Click to expand...
Click to collapse
Would you recommend doing the conversion?