i am a user of a311 and switch to art on runtime using developer option on stock rom now after rebotting on showing canvas and then black screen my phone is working properly but only a black scrren is being shown i have stock recovery on the phone can i flash stock rom using stock recovery help quickly with procedure
abhishek biswas said:
i am a user of a311 and switch to art on runtime using developer option on stock rom now after rebotting on showing canvas and then black screen my phone is working properly but only a black scrren is being shown i have stock recovery on the phone can i flash stock rom using stock recovery help quickly with procedure
Click to expand...
Click to collapse
You can't ..Better Wipe everything with Stock Recovery(factory reset) ..now Everything will be fine I think... Then just Install Mobile uncle tools and flash TWRP Recovery & Reboot to TWRP & Backup the Clean Stock ROM you have just Factory Reseted now .. Then you use your device as Usual ..
Note : if you already have Any Stock ROM Zips Means no Problem..if You Don't Have means Backup Your Phone's Stock ROM With TWRP..It will be a Lifesaver Sometimes.. Just Clicking A Restore Button in TWRP is Enough to Go Back to Stock If Any Problems Means.. That's Why All Users use Custom Recovery instead of Stock Recovery After Buying the Phone..#Lifesaver ..
Sent from my Nitro
---------- Post added at 12:26 PM ---------- Previous post was at 12:11 PM ----------
abhishek biswas said:
i am a user of a311 and switch to art on runtime using developer option on stock rom now after rebotting on showing canvas and then black screen my phone is working properly but only a black scrren is being shown i have stock recovery on the phone can i flash stock rom using stock recovery help quickly with procedure
Click to expand...
Click to collapse
Use these Steps If You Wanna Use Custom Recovery for your Device..
Links to Download Mobile Uncle Tools & TWRP...
Mobile Uncle Tools ..
https://drive.google.com/file/d/0Bx-h4ctMYiyTSll0R29nRWt5Uzg/view?usp=docslist_api
TWRP :
https://drive.google.com/file/d/0BxtTbZnWNn4vd0JfQzRKdUp6YXc
Instructions for Flashing TWRP ..
1. Download TWRP ..
2. Rename it "recovery.img" without " " ..
3. Paste the recovery in root of your internal stoarge i.e. outside all folders..
3. Install Mobileuncle Tools ..
4. In Mobileuncle Tools click on "Recovery Update" It will show recovery.img file on top under Recovery Card in SD Card Title..
5. Select it, phone will ask "Are you sure Flash Recovery" Click yes..
6. Grant SuperUser permisssions if asked..
7. Again it will ask to Reboot in Recovery mode. Click ok..
Sent from my Nitro
i will definitely do that thanks but i have messed up with my stock rom and wants to start with a clean installation of stock rom so my question to you is that will i need any sort of back up of my phone IMEI INFORMATION or any sort of vital info because i will be doing it for the first time
i will definitely do that thanks but i have messed up with my stock rom and wants to start with a clean installation of stock rom so my question to you is that will i need any sort of back up of my phone IMEI INFORMATION or any sort of vital info because i will be doing it for the first time and what to check in back up twrp default was data and system ckecked i want to back up my stock rom only so it is enough or do i have check others like boot, logo, nvram, uboot, because i do not understand these things... reply soon waiting
i will definitely do that thanks but i have messed up with my stock rom and wants to start with a clean installation of stock rom so my question to you is that will i need any sort of back up of my phone IMEI INFORMATION or any sort of vital info because i will be doing it for the first time and what to check in back up in twrp option default was data and system checked i want to back up my stock rom only so it is enough or do i have check others like boot, logo, nvram, uboot, because i do not understand these things... reply soon waiting
abhishek biswas said:
i will definitely do that thanks but i have messed up with my stock rom and wants to start with a clean installation of stock rom so my question to you is that will i need any sort of back up of my phone IMEI INFORMATION or any sort of vital info because i will be doing it for the first time and what to check in back up in twrp option default was data and system checked i want to back up my stock rom only so it is enough or do i have check others like boot, logo, nvram, uboot, because i do not understand these things... reply soon waiting
Click to expand...
Click to collapse
Sorry for the Late Reply Dude..I have Not Subscribed to this thread ..So got no Notifications..& ill give You Quick Answers Hereafter For Your Questions (Subscribed)..
Wait a minute I'll Tell you..
Sent from my Nitro using XDA-Developers mobile app
---------- Post added at 04:47 PM ---------- Previous post was at 04:44 PM ----------
abhishek biswas said:
i will definitely do that thanks but i have messed up with my stock rom and wants to start with a clean installation of stock rom so my question to you is that will i need any sort of back up of my phone IMEI INFORMATION or any sort of vital info because i will be doing it for the first time and what to check in back up in twrp option default was data and system checked i want to back up my stock rom only so it is enough or do i have check others like boot, logo, nvram, uboot, because i do not understand these things... reply soon waiting
Click to expand...
Click to collapse
See this Post Of Mine..On How to Backup Stock ROM .. http://forum.xda-developers.com/showthread.php?p=66172678
Sent from my Nitro using XDA-Developers mobile app
---------- Post added at 04:52 PM ---------- Previous post was at 04:47 PM ----------
abhishek biswas said:
i will definitely do that thanks but i have messed up with my stock rom and wants to start with a clean installation of stock rom so my question to you is that will i need any sort of back up of my phone IMEI INFORMATION or any sort of vital info because i will be doing it for the first time and what to check in back up in twrp option default was data and system checked i want to back up my stock rom only so it is enough or do i have check others like boot, logo, nvram, uboot, because i do not understand these things... reply soon waiting
Click to expand...
Click to collapse
Just Do A Clean Wipe Of Your Stock ROM .. Factory Reset is Enough(Normal wipe in TWRP is Enough)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And After theWiping is Finished, Reboot to System Use For A While (Don't Install Any Apps or New Things) then Reboot to Recovery
.. And Back up Your Clean STOCK ROM Its Enough..no need of IMEI Backup & All ..Everything Will Be In Your STOCK ROM BACKUP Itself..
http://forum.xda-developers.com/showthread.php?p=66172678
Sent from my Nitro using XDA-Developers mobile app
thanks but i need to flash my a311 stock rom because my phones stock rom has got some problems, the play store,youtube and other google services is not connecting to internet but i am able to browse internet for that i need stock rom and steps to flash it in twrp not using pc because it has got driver isssues and of usb cable so please provide me steps of flashing stock rom in twrp and again do i need back up of my phone IMEI INFORMATION because it will be a fresh start
abhishek biswas said:
thanks but i need to flash my a311 stock rom because my phones stock rom has got some problems, the play store,youtube and other google services is not connecting to internet but i am able to browse internet for that i need stock rom and steps to flash it in twrp not using pc because it has got driver isssues and of usb cable so please provide me steps of flashing stock rom in twrp
Click to expand...
Click to collapse
So are you saying that your Stock has Some Problems & need New Stock ROM zip ? Right ..
Sent from my Nitro using Tapatalk
---------- Post added at 07:07 AM ---------- Previous post was at 06:50 AM ----------
abhishek biswas said:
thanks but i need to flash my a311 stock rom because my phones stock rom has got some problems, the play store,youtube and other google services is not connecting to internet but i am able to browse internet for that i need stock rom and steps to flash it in twrp not using pc because it has got driver isssues and of usb cable so please provide me steps of flashing stock rom in twrp and again do i need back up of my phone IMEI INFORMATION because it will be a fresh start
Click to expand...
Click to collapse
Iam sure Your Stock doesn't Have Any problems.. Factory Reset it..It Will be Fine
Try flashing with GAPPS & See if YouTube & other Google Services Doesn't Work..GAPPS is the Problem here..
First try the Above .. For Stock ROM u need GAPPS for ARM 4.4(KitKat) use Pico Package it's Enough ..
Anyhow you installed TWRP Right.. So no problems
Do This Only If You're facing problems even after GAPPS install & Factory Reset Method ..
Download this stock ROM
http://forum.xda-developers.com/showthread.php?t=3287008
& Place the Zip in your SDCard ..
Reboot to Recovery ..
Select install & Choose the Zip & flash it ..then Reboot ..that's it ..
Note : Take a Backup of hour Own Stock ROM Before Doing this ,Even Your Stock ROM Has Some Problems..
Sent from my Nitro using Tapatalk
---------- Post added at 07:09 AM ---------- Previous post was at 07:07 AM ----------
abhishek biswas said:
thanks but i need to flash my a311 stock rom because my phones stock rom has got some problems, the play store,youtube and other google services is not connecting to internet but i am able to browse internet for that i need stock rom and steps to flash it in twrp not using pc because it has got driver isssues and of usb cable so please provide me steps of flashing stock rom in twrp and again do i need back up of my phone IMEI INFORMATION because it will be a fresh start
Click to expand...
Click to collapse
No need of IMEI backup ..if You Wanna keep means you can.. Use mobile Uncle Tools backup IMEI option for that..that's it ..it will be Backuped ..
Sent from my Nitro using Tapatalk
thanks but i already have the stock rom in cpb format so my question is that will this cpb format file is required for flashing the rom using pc only or we can do it with twrp... anyway i am downloading the zip format you provided and also please sent me the procedure for flashing gapps
abhishek biswas said:
thanks but i already have the stock rom in cpb format so my question is that will this cpb format file is required for flashing the rom using pc only or we can do it with twrp... anyway i am downloading the zip format you provided and also please sent me the procedure for flashing gapps
Click to expand...
Click to collapse
Nope ..Only Zips Are Possible With TWRP .. So Use The Zip I Provided ..
Go to www.opengapps.org .. & Download ARM 4.4 Pico Package ..
Download It & Keep ..Dont FLASH It..
Now Flash The STOCK ROM In Recovery..After Flashing The ROM Reboot to System .. As It's A Stock ROM I Think It Will Have All GAPPS .. Check it .. If It doesn't Have Go To Recovery & Flash It Quickly .. And The ROM is Already Pre Rooted .. you Can Update SuperSU Binaries After Reboot ..
IMPORTANT :
After Rebooting To System ,By Flashing The ROM ..First Check for Google Apps ,Are There Or Not ..Don't Change Anything In Settings Or So on .. Check it First , if It's Not there Reboot to Recovery Soon & Flash It then Reboot to System ..That's It ..
Follow the Instructions In The STOCK ROM Thread ..
Good Luck ..
Sent from my Nitro using Tapatalk
flashed gapps not change same problem now i am going for 2nd step
Related
Hello guys I’m here with a noob guide for who are very new to Rooting and how to install a new ROM on SGS2,
But this guide after rooting process will be same to flash the Custom ROM on other devices as well.
Rooting of GB devices
I'm not responsible for any harm to your device in this process, you are doing it on your own risk. By doing this you're voiding warranty of your product.
2.3.3/2.3.6 User should have to take a look on Chainfire's CFRoot method. However 2.3.3 can be rooted through recovery but 2.3.6 can't be without CFRoot method.
Needed tool for rooting GB
PC
Samsung USB drivers
Odin3
CFRooted stock kernel
Instructions-
Follow these instructions to the letter. Do not touch any buttons or checkboxes that are not listed below to touch!
Unzip the attached CF-Root-xxx-vX.X.zip
(USB) Disconnect your phone from your computer
Start ODIN
Click the PDA button, and select CF-Root-xxx-vX.X.tar
Put your phone in download mode
(USB) Connect the phone to your computer
Make sure repartition is NOT checked
Click the START button
Wait for the phone to reboot
Done
Now you have rooted phone with custom recovery. Thanks to @Chainfire for his awesome work.
Rooting of ICS
So for rooting the SGS2 we have a lots of guides but there is the much safe way to root it flashing the script via Stock recovery. So Philz has overcome to this problem with his awesome Kernel and with this thread named [ICS/JB]Universal Rooting for most phones, Any ROM, now with CWM6.
Instructions-
Copy the Root_XXX.zip file you downloaded to externalsd card
Boot into stock recovery (volume up+home+power), and select "apply update from external storage". Now select the Root_XXX.zip file downloaded above and you are rooted
To unroot, do the above steps and replace the file Root_XXX.zip by the attached Unroot_SuperUser-Busybox-Uninstaller-Update2-signed.zip. It will delete superuser, su and busybox packages.
Download links-
Root_SuperSU.0.98-Busybox.1.20.2-signed.zip
Unroot_SuperUser-Busybox-Uninstaller-Update2-signed.zip
Thanks to @Phil3759 for his awesome thread. Now you need custom kernels which should have the custom recovery, for that you can use DorimanX or Siyah kernel which are brickbug free.
Or you can just download the PhilzKernelCWM.zip with your matched code or at least similar kernel code and put it on your external SD card and then reboot into recovery by Holding the three combo key (Volumeup + Home + Power) and then choose option “Install Update zip” and choose the PhilzCWM.zip and flash it. After flashing done, you have rooted your Phone successfully with SuperSU installed. Now reboot to the recovery again and backup your ROM.
For JB release rootingJust flash the philz kernel from the stock recovery and you are rooted.
Now time to Backup your current ROM before flashing the new Custom ROM on your device, it is recommended in case when something happen bad. If you are running 4.0.3 or 4.0.4 then the backup process is very simple just reboot into recovery and then touch the Backup option and that’s all, your all apps, contacts, sms and data will be backed up by default, and this backup will be placed on external sd card in Clockworkmod/Backup path by default.
But if you are running JB 4.1.2 then the backup job is not easy on all recovery’s. There is an extra folder called Preload is very important one where your all system apps have been placed, which is not included in simple backup process. So the drill starts here…..Reboot into recovery select option “Backup and Restore”
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now select the option “Advance Backup and Restore”
Now select the “Custom Backup Job”. There you have tick the “Preload” folder and then scroll down and “Start custom Backup job” And then it will ask where you want to store the backup on you “Intenal/External Stroage”. After selecting the storage path it will start the backup process. When it finished you are ready to install the new ROM.
Note: If you don’t want to do this manually then I recommend the Apolo kernel which can backup the Preload by default no need of custom backup
NOTE: Before doing the below steps, backup your all apps and data using “Helium” or “Go backup” from play store to restore them on your newly flashed ROM. As after wipe data/reset you will lost all your contacts, Sms’s, and app and their data.
Now select the option “Wipe Data/ Factory reset” and then choose the second option “Clean to Install a New ROM”.
Note: I’ve seen this option in Philz only which is for Samsung only, non Samsung users have to select the first option and then follow these steps:
Wipe cache
Advanced/Wipe Dalvik cache
Now Select the option “Install Zip” and choose your zip from either Internal SD card or External SD Card wherever you have put the downloaded ROM zip file and flash it. Let’s finish the process and now reboot your system, it will take about 5-10 Min on first boot so don’t panic.
My credit and thanks
A big thanks to my NeatROM family.
Good work buddy. :thumbup:
Sent from my iPad using Tapatalk HD
Jeetu said:
Good work buddy. :thumbup:
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
Thanks buddy. I really want to make it good. Just shout for edit anything there.
Sent from my GT-I9100 using Tapatalk 4
Jeetu said:
Good work buddy. :thumbup:
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
+1 :thumbup:
Sent from my NeatRom'ed GT-I9300 wifi hotspoting from my NeatRom'ed GT-I9100
---------- Post added at 01:57 PM ---------- Previous post was at 01:57 PM ----------
avirk said:
Thanks buddy. I really want to make it good. Just shout for edit anything there.
Sent from my GT-I9100 using Tapatalk 4
Click to expand...
Click to collapse
Check pm mate
Sent from my NeatRom'ed GT-I9300 wifi hotspoting from my NeatRom'ed GT-I9100
_Sale_ said:
+1 :thumbup:
Sent from my NeatRom'ed GT-I9300 wifi hotspoting from my NeatRom'ed GT-I9100
---------- Post added at 01:57 PM ---------- Previous post was at 01:57 PM ----------
Check pm mate
Sent from my NeatRom'ed GT-I9300 wifi hotspoting from my NeatRom'ed GT-I9100
Click to expand...
Click to collapse
Thanks master. You are always welcome. If its nee any edit just tell me.
Sent from my GT-I9100 using Tapatalk 4
Great Guide
Good Job Done :good::good:
Great guide mate
Envoyé depuis mon GT-I9100 en utilisant Tapatalk 4
Nyc my bro :thumbup::thumbup::thumbup:
Kepp it Up
Sent from my GT-I9500 using Tapatalk 2
A big Thanks to all of you guys.
Sent from my GT-I9100 using Tapatalk 4
Hey avirk, nice job. :thumbup:
3 things to mention:
1. There's no Philz kernel for GB ROMs.
2. They will end up with Superuser, not SuperSu
3. I think after ticking preload in Custom backup job, it is a good idea to Save Philz settings because it needs to stay ticked for restoring backup with preload included as well.
Cheers.
Nice Avirk, good luck :thumbup:
Sent from my Galaxy S2 using XDA Premium 4 mobile appNeed to extend you battery life?Just follow the Bob's battery guide.
@avirk:
Well done mate !
I have just added this guide to the first post of the New Members friendly Q&A thread.
electricsheepdreamer said:
Hey avirk, nice job. :thumbup:
3 things to mention:
1. There's no Philz kernel for GB ROMs.
2. They will end up with Superuser, not SuperSu
3. I think after ticking preload in Custom backup job, it is a good idea to Save Philz settings because it needs to stay ticked for restoring backup with preload included as well.
Cheers.
Click to expand...
Click to collapse
Hmm, For GB link edited with CFroot, and there is any .ini file is missing on my phone so I'm not able to save the settings for Philz so couldn't take any SS for that. If anyone can provide me SS I'll edit the guide again. :good:
gorandroid said:
Nice Avirk, good luck :thumbup:
Sent from my Galaxy S2 using XDA Premium 4 mobile appNeed to extend you battery life?Just follow the Bob's battery guide.
Click to expand...
Click to collapse
Thank you mate.
It_ler said:
@avirk:
Well done mate !
I have just added this guide to the first post of the New Members friendly Q&A thread.
Click to expand...
Click to collapse
Thanks, and that's an honour for me that my first guide and its placed there. Thanks again for look into it and link it there. :victory:
@avirk ,
Good job mate as always :good:
Sent using my Premium-Zanpakutō {斬魄刀} powered by my Shinigami soul <+> ლ(◣_◢)ლ
Christian Nothing said:
@avirk ,
Good job mate as always :good:
Sent using my Premium-Zanpakutō {斬魄刀} powered by my Shinigami soul <+> ლ(◣_◢)ლ
Click to expand...
Click to collapse
Thanks mate, I really appreciate all of your help.
Do i need to install custom recovery like other phones or unlock boot loader to install custom roms?
So ur guide means,
1- install kernel via phone's current stock recovery
2- back up current stock rom "apparently ics for me"
3- place new custom rom zip i got from forum on sd card
4- go to restore factory and format
5- open phone's based recovery mode and choose install zip from sd? And flash rom
That's it? If yes, do i need to reinstall zip kernel to get root again?
Thx dude a lot u r a life saver
Sent from my C6603 using xda premium
ahassouna said:
Do i need to install custom recovery like other phones or unlock boot loader to install custom roms?
So ur guide means,
1- install kernel via phone's current stock recovery
2- back up current stock rom "apparently ics for me"
3- place new custom rom zip i got from forum on sd card
4- go to restore factory and format
5- open phone's based recovery mode and choose install zip from sd? And flash rom
That's it? If yes, do i need to reinstall zip kernel to get root again?
Thx dude a lot u r a life saver
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
If you are on ICS then download the philz kernel and flash it under stock recovery, if possible see if there is the philz available for your firmware. Read the Philz thread carefully.
Place the zip of rom on your sd you got from forum.
After flashing the philz your phone is rooted and you have custom recovery.
Just reboot to recovery again and you will see it.
When you will backup it will backup your current kernel and recovery automatically which would be philz.
If your phone is not locked by any carrier then you don't need to unlock its bootloader its already unlocked.
Do a factory reset from the recovery not from the phone.
Wipe cache and then under Advanced wipe dalvik cache, strongly recommended to not get the bootloop.
Now flash the ROM zip and reboot the phone after completing the flash of zip.
Note: Please read the OP carefully how can you get back your apps and data.
If still have any doubt just ask me without any hesitation. Good luck.
Sent from my GT-I9100 using Tapatalk 4
ahassouna said:
Do i need to install custom recovery like other phones or unlock boot loader to install custom roms?
So ur guide means,
1- install kernel via phone's current stock recovery
2- back up current stock rom "apparently ics for me"
3- place new custom rom zip i got from forum on sd card
4- go to restore factory and format
5- open phone's based recovery mode and choose install zip from sd? And flash rom
That's it? If yes, do i need to reinstall zip kernel to get root again?
Thx dude a lot u r a life saver
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
If you will install a custom ROM like CM, JellyBam, SlimBean(aosp/aokp based), Or my favourite NeatRom(Sammy based custom rom) you don't need to root them again they are all rooted.
After flashing any of these ROM your current kernel will be overwrite by these ROM's default kernel which comes with CWM 6.+. So no need to install the custom recovery again.
And you can't install a ROM with stock recovery you need a custom recovery. If I'm not clear you can ask any time.
It's much much better, I was going to send you a PM about GB root but now it's done, great job mate, really great
Sent from GT-I9100 using Tapatalk 4
Nice effort mate!
Added to my personal list of help threads.. Thanks!!
Hello everyone,
I have a bizarre problem. I was on Shostock 4.1.2 and I decided to flash OmniROM [NIGHTLY BUILDS].I've completed the 5 steps mentioned in the OP http://forum.xda-developers.com/showthread.php?t=2544790 and flashing was went on well, but it goes to boot loop of initial Samsung Logo. I could open the recovery mode, TWRP V2.6.3.0 is installed now. When I tried to reflash the Omni ROM, it gets failed. I tried to flash other ROMs like Shostock 4.0 which was running earlier and stock GB but to no avail.
This is the message am getting when flashing "ANY" ROM from recovery.
updating partition details
Full SELinux support is present
initializing /sdcard/XXXXXX/firmware file
checking for MD5 file
skipping MD5 check:no MD5 file found
veriying zip signature..
E:Zip signature verification failed:1
Error Flashing zip /sdcard/xxxx/firmware file
updating partition details
FAILED in red
I tried to flash the stock UCKH7 which came with my phone but Odin is not detecting my phone.I tried V1.85, 3.07 &3.09 but its not at all detecting the device. Tried a Jig to get into download mode eventhough am able to get the DL mode through key combinations but doesnt helps. Took off the battery and vol down button and connected the USB cable to get into DL mode as suggested by Creepncrawly still no luck. Uninstalled the USB driver and reinstalled it, no luck to get detected.
When charging off mode Charging indicator: Big white battery icon with a question mark on it.
I hope its soft bricked as am able to get into recovery.Is my phone bricked and if not how do i fix it? Any body know what to do next?
I've already done so many wipes including factory reset, dalvik, cache, system & data.
Thanks in advance,
Here's a thought: if you're able to get into recovery AND still have your old SHOstock backup (or rom zip), just flash a CWM-bssed kernel, then immediately reboot recovery. This should give you back CWM and allow you to restore your previous backup... if you still have it.
Thank you for supplying the details of your process, and of the failure.
From twrp recovery:
[install] > [omnirom-nightly.zip] > un-tick zip file signature verification >>swipe>> reboot system
please report back with your results
sajjt said:
[...]
updating partition details
Full SELinux support is present
initializing /sdcard/XXXXXX/firmware file
checking for MD5 file
skipping MD5 check:no MD5 file found
veriying zip signature..
E:Zip signature verification failed:1
Error Flashing zip /sdcard/xxxx/firmware file
updating partition details
FAILED in red[...]
Click to expand...
Click to collapse
---------- Post added at 08:31 AM ---------- Previous post was at 07:47 AM ----------
...With the signature-verification box ticked, I achieved the results that you describe.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks to everyone
Thanks creepncrawly for the reply for my PM, it was a great relief to see your assurance:good:
SteveMurphy said:
Here's a thought: if you're able to get into recovery AND still have your old SHOstock backup (or rom zip), just flash a CWM-bssed kernel, then immediately reboot recovery. This should give you back CWM and allow you to restore your previous backup... if you still have it.
Click to expand...
Click to collapse
Exactly thats what I did, flashed Siyah AJK 4.9 and I got back my phone in working, thanks for the input:good:
cyril279 said:
Thank you for supplying the details of your process, and of the failure.
From twrp recovery:
[install] > [omnirom-nightly.zip] > un-tick zip file signature verification >>swipe>> reboot system
please report back with your results
---------- Post added at 08:31 AM ---------- Previous post was at 07:47 AM ----------
...With the signature-verification box ticked, I achieved the results that you describe.
Click to expand...
Click to collapse
Cyril, you are awsome man, thanks for the effort. I tried that before but it never worked. I guess my zip file could be a bad download eventhough the MD5 matches I tried few more attempts before flashing a CWM kernel and some tries it successfully finished with the Omni ROM but it never booted properly and thats the reason I came to the conclusion that could be bad download
But am still not clear about why I was not able to run the cooks wipe script or other Shostock/GB ROMs which I was able to do before the issue. Is it not supported in TWRP?
Anyways, am in great relief once my phone is back to work and thanks to all for the helping hands.
Will try another download of the Omni ROM next week as I had enough for this week
BTW, is there an option for taking a screenshot in TWRP? It could be great tool for giving details.
sajjt said:
[...]I guess my zip file could be a bad download eventhough the MD5 matches I tried few more attempts before flashing a CWM kernel and some tries it successfully finished with the Omni ROM but it never booted properly and thats the reason I came to the conclusion that could be bad download
But am still not clear about why I was not able to run the cooks wipe script or other Shostock/GB ROMs which I was able to do before the issue. Is it not supported in TWRP?
[...]
BTW, is there an option for taking a screenshot in TWRP? It could be great tool for giving details.
Click to expand...
Click to collapse
I'm definitely sorry that OmniROM wasn't able to work out for you. Others have been able to experience Omni without the same difficulties, although a few have had issues with the initial boot. Shostock was my first custom ROM, and it is a good one. I have had issues flashing other roms from the jeboo kernel, and IIRC, the solution was to flash AJK first, then proceed from there (as SteveMurphy prescribed).
You mentioned that you followed the 5 steps in the Omni OP, but did you heed the OP advisement to start from cwm 6.0.4.4+?
Recovery screenshot obtained using this tool.
---------- Post added at 11:38 AM ---------- Previous post was at 11:06 AM ----------
MobileOdin OPTION: (don't be afraid, it's free and easy)
(procedure verified working (running SHOstock & Jeboo Kernel) as of 2013-12-13 12:49):
With your phone on fully booted into (whatever ROM)
1) Gather all necessary flash files onto internal sdcard before performing these steps.
---a) Boot.IMG (extracted from omni-4.4.x-latesti777-nightly.zip)
---b) MrCook's ROM wipe.zip
---c) Omni-nightly.zip
---d) PA GApps (optional)
---e) SuperSU (optional)
2)Mobile-odin flash Omni's boot.img
>>the phone will try to reboot, but will likely fail. Three-finger salute (with the USB cable UNPLUGGED), until you are in TWRP recovery<<
3) [install] > [COOK'S ROM WIPE.zip] > [add more zips] > [omni-4.4.x-latesti777-nightly.zip] > [add more zips as desired] >>swipe to confirm flash>> [reboot system]
>>first boot may take a little longer than normal, but you should boot all the way into Omni.
---------- Post added at 12:25 PM ---------- Previous post was at 11:38 AM ----------
...to answer the rest of your questions, TWRP is definitely capable of flashing Cook's script and other ROMS. beyond the zip verification toggle, I'm not sure why it didn't work for you.
cyril279 said:
I'm definitely sorry that OmniROM wasn't able to work out for you. Others have been able to experience Omni without the same difficulties, although a few have had issues with the initial boot. Shostock was my first custom ROM, and it is a good one. I have had issues flashing other roms from the jeboo kernel, and IIRC, the solution was to flash AJK first, then proceed from there (as SteveMurphy prescribed).
You mentioned that you followed the 5 steps in the Omni OP, but did you heed the OP advisement to start from cwm 6.0.4.4+?
Recovery screenshot obtained using this tool.
---------- Post added at 11:38 AM ---------- Previous post was at 11:06 AM ----------
MobileOdin OPTION: (don't be afraid, it's free and easy)
(procedure verified working (running SHOstock & Jeboo Kernel) as of 2013-12-13 12:49):
With your phone on fully booted into (whatever ROM)
1) Gather all necessary flash files onto internal sdcard before performing these steps.
---a) Boot.IMG (extracted from omni-4.4.x-latesti777-nightly.zip)
---b) MrCook's ROM wipe.zip
---c) Omni-nightly.zip
---d) PA GApps (optional)
---e) SuperSU (optional)
2)Mobile-odin flash Omni's boot.img
>>the phone will try to reboot, but will likely fail. Three-finger salute (with the USB cable UNPLUGGED), until you are in TWRP recovery<<
3) [install] > [COOK'S ROM WIPE.zip] > [add more zips] > [omni-4.4.x-latesti777-nightly.zip] > [add more zips as desired] >>swipe to confirm flash>> [reboot system]
>>first boot may take a little longer than normal, but you should boot all the way into Omni.
---------- Post added at 12:25 PM ---------- Previous post was at 11:38 AM ----------
...to answer the rest of your questions, TWRP is definitely capable of flashing Cook's script and other ROMS. beyond the zip verification toggle, I'm not sure why it didn't work for you.
Click to expand...
Click to collapse
Thanks for reverting back so fast:good:
I am not sure that CWM was on 6.0.4.4 at that time Before flashing your ROM I've flashed the [ROM/MOD] 4.3.1 ~ Jellybean ~ AoCP 6.4 ~ The Collective for few hours which is having the required CWM version I guess but not sure about that
I m happy to see that you have simplified the instructions in OP which is good for noobs like me. Would you mind to add a link for CWM 6.0.4.4 also in the OP? I know its too much of spoon feeding but to be honest, I couldn't find a proper one for I777.
Thanks for the screenshot tool, will be useful for the future flashes Will come back to your thread soon.
sajjt said:
[···]Would you mind to add a link for CWM 6.0.4.4 also in the OP? I know its too much of spoon feeding but to be honest, I couldn't find a proper one for I777.[···]
Click to expand...
Click to collapse
CWM cannot be flashed separately on this device, and there are not any custom kernels available for it yet; therefore, the easiest way to get the latest is to flash the latest cm nightly, as stated in the OP of the omni thread.
I am using micromax unite2 with twrp after reset from setting not getting on then i gone in recovery option in that while instaling,wiping,format or any task it says failed to open theme zip pls help me bro
cyril279 said:
Thank you for supplying the details of your process, and of the failure.
From twrp recovery:
[install] > [omnirom-nightly.zip] > un-tick zip file signature verification >>swipe>> reboot system
please report back with your results
---------- Post added at 08:31 AM ---------- Previous post was at 07:47 AM ----------
...With the signature-verification box ticked, I achieved the results that you describe.
Click to expand...
Click to collapse
same here bro i can't normaly flash the rom because it always reboot
still i didnt mange to back up my files
Most of the people on xda getting error while flashing new update on YU yureka.
so i have created this thread to solve there's problems :highfive:
you just have to follow some steps.
1.you should be on stock recovery.
if you do not have stock recovery then here is LINK
************************************************************
2. now you need big data pack you have to download whole updated stock rom which is approx 643.767 MB
here is LINK.
3. now put this in internal storege(not in any folder or ext_sd card)
4. go to recovery and apply update. and choose this zip file and flash it :good:
and now very important step. Hit thanks button :laugh:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do i need to be on stock Cm12 ROM to do this?? I am currently running Pac Rom.
Thanks!
sunny765 said:
Do i need to be on stock Cm12 ROM to do this?? I am currently running Pac Rom.
Thanks!
Click to expand...
Click to collapse
yes bro if you want update then you should be on stock if you have backup ur stock rom then just restore it.
koi yaar ye recovery ko flashable zip mai kar k dona plss. direct cwm se stock recovery flash ho esa
Rakesh251 said:
koi yaar ye recovery ko flashable zip mai kar k dona plss. direct cwm se stock recovery flash ho esa
Click to expand...
Click to collapse
have tried flishify app?
LINK
flash using this.
i have not tried yes but search.
Why is it 643 mb the update is just 130mb
thearjunraju said:
Why is it 643 mb the update is just 130mb
Click to expand...
Click to collapse
'cos it's the "whole updated stock rom", i.e., stock rom + the latest update rolled into one convenient easy-to-use package. read the op.
i was reading stock kernel was needed
i know kernel is usually in the full build
so
1. do we need the stock kernel?
2. Will TA backup work?
3. do we need to clear cache and data?
4. Will the existing 3rd party kernel and recoveries work after the update?
As far as I know from my limited flashing experience, the custom kernel will get overwritten by those present in the ROM being flashed.
Sent from my A0001 using XDA Free mobile app
oemaritradey said:
i know kernel is usually in the full build
so
1. do we need the stock kernel?
2. Will TA backup work?
3. do we need to clear cache and data?
4. Will the existing 3rd party kernel and recoveries work after the update?
Click to expand...
Click to collapse
1. you should be on stock kernel.
2.after upgrading your mobile you should take backup again. becoz why you want to revert back to older version ?
3.no need to clear cache and data.
4. yes you can flash any kernel and recovery . i had updated it and i am on TWRP.
*************************************************************************************************************************
feeroz123 said:
As far as I know from my limited flashing experience, the custom kernel will get overwritten by those present in the ROM being flashed.
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
yes you are right but still there is thread on yu forum for it and they said that you should be on stock kernel by the way you can flash it on your current kernel if you see any error then you can flash stock kernel and flash this update
ashish_zarekar said:
1. you should be on stock kernel.
2.after upgrading your mobile you should take backup again. becoz why you want to revert back to older version ?
3.no need to clear cache and data.
4. yes you can flash any kernel and recovery . i had updated it and i am on TWRP.
*************************************************************************************************************************
yes you are right but still there is thread on yu forum for it and they said that you should be on stock kernel by the way you can flash it on your current kernel if you see any error then you can flash stock kernel and flash this update
Click to expand...
Click to collapse
Please flash any custom kernel to see if it works or not :3
oemaritradey said:
Please flash any custom kernel to see if it works or not :3
Click to expand...
Click to collapse
I am on thunderzap kernel
enjoy happy flashing .
best of luck
ashish_zarekar said:
1. you should be on stock kernel.
2.after upgrading your mobile you should take backup again. becoz why you want to revert back to older version ?
3.no need to clear cache and data.
4. yes you can flash any kernel and recovery . i had updated it and i am on TWRP.
*************************************************************************************************************************
yes you are right but still there is thread on yu forum for it and they said that you should be on stock kernel by the way you can flash it on your current kernel if you see any error then you can flash stock kernel and flash this update
Click to expand...
Click to collapse
LOL i tried falshing stock kernel with flashify both time i didnt get wifi signal(MAC UNKNOWN) xD Am not switching over to new update anytime soon....
Flashed this full ROM. Successful !! :highfive:
But I lost Root access and the stock recovery.
I am trying to flash it in fastboot mode, but its stuck at this message:
target reported max download size of 268435456 bytes
sending 'recovery' (8394 KB)...
Without stock recovery, I can't flash the Root.zip file to get root access.
feeroz123 said:
Flashed this full ROM. Successful !! :highfive:
But I lost Root access and the stock recovery.
I am trying to flash it in fastboot mode, but its stuck at this message:
target reported max download size of 268435456 bytes
sending 'recovery' (8394 KB)...
Without stock recovery, I can't flash the Root.zip file to get root access.
Click to expand...
Click to collapse
yes i know when you flash this rom you will lose your root.
and why are you flashing it in fastboot mode ?
this rom is flashable in stock recovery only dont do that.
and what were you doing while you got that error message ?
ashish_zarekar said:
yes i know when you flash this rom you will lose your root.
and why are you flashing it in fastboot mode ?
this rom is flashable in stock recovery only dont do that.
and what were you doing while you got that error message ?
Click to expand...
Click to collapse
I meant, I lost the stock recovery as well. SO I was trying to flash the stock recovery image file in fastboot mode as usual. But it gives me error as I mentioned earlier. My phone is connected to PC while I try to flash the recovery image file. I suspected the drivers got erased, but thats not the case.
Only when I install stock recovery, the Root.zip file can be flashed using it ( to root the phone again). Because flashing the zip files from new Cyanogen Recovery is not at all working. Some R/W or backmap/bitmap kind of issue comes when I try to flash using the updated recovery.
feeroz123 said:
I meant, I lost the stock recovery as well. SO I was trying to flash the stock recovery image file in fastboot mode as usual. But it gives me error as I mentioned earlier. My phone is connected to PC while I try to flash the recovery image file. I suspected the drivers got erased, but thats not the case.
Only when I install stock recovery, the Root.zip file can be flashed using it ( to root the phone again). Because flashing the zip files from new Cyanogen Recovery is not at all working. Some R/W or backmap/bitmap kind of issue comes when I try to flash using the updated recovery.
Click to expand...
Click to collapse
what? you lost your stock recovery ? how is it possible ? it means you dont have any recovery ?
have not face yet.
and how did you flash root.zip file using stock recovey
stock recovery does not have option to flash. it always have update option.
you can flash root.zip file using custom recovery only.
Thankyou for this post... can you please advice to update this ota
I am in stock rom with twrp recovery + sandy kernel
what are the steps to update this ota... can you tell step by step
thank you in advance
m_rajaganesh said:
Thankyou for this post... can you please advice to update this ota
I am in stock rom with twrp recovery + sandy kernel
what are the steps to update this ota... can you tell step by step
thank you in advance
Click to expand...
Click to collapse
DO NOT SPAM.
read carefully i already told the steps in my first POST
download stock kernel and flash it.
download stock recovery and flash it.
now download whole rom from my post and flash it.
ashish_zarekar said:
what? you lost your stock recovery ? how is it possible ? it means you dont have any recovery ?
have not face yet.
and how did you flash root.zip file using stock recovey
stock recovery does not have option to flash. it always have update option.
you can flash root.zip file using custom recovery only.
Click to expand...
Click to collapse
I am sorry, I put it in wrong terms.
The CWM recovery (having basic look with text in blue that can be opted only using hardware buttons and not touch) is not shown for me now. The Cyanogen Recovery it shows me now looks new (with Apply Update option that can be opted by touch as well). THis new recovery fails whenever I try to flash any zip with it. The error being R/W error or something.
With the old recovery (CWM recovery) I could/did flash the Root.zip. After flashing this full ROM (having the patch), the old recovery is lost. It shows only the new recovery. And with it the Root.zip can not be flashed as it fails, as I mentioned earlier.
May be I will get you screenshots of the new Cyanogen recovery to explain what I mean.
Old CWM Recovery:
New Cyanogen Recovery:
I have TWRP in my A310. Flashed http://forum.xda-developers.com/a310/development/resurrection-remix-lp-5-5-t3160496 this rom, dunno which version TWRP I have, so now phone is not starting up.
Any help will be appreciated, Guys I don't want to take my phone to Service center ppl. They are horrible.
Phone is turning on, trying to boot - failing - restarting - trying to enter recovery as a TWRP logo shows up then screen flickers and nothing happens and this keeps going on. TWRP also tries to open MTP but that fails too.
Dosen't stay in Bootloader - fastboot as well, restarts.
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Thanks for quick reply
shaijuvjohn said:
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Click to expand...
Click to collapse
No, I am not able to go to recovery.
A quick question to those who have used YGDP, Does it work while is switched off ?
headlessNick said:
No, I am not able to go to recovery.
A quick question to those who have used YGDP, Does it work while is switched off ?
Click to expand...
Click to collapse
Do you have the backup of previous rom?
If you are going to flash stock rom, gydp tool will detect the phone even without battery too.
shaijuvjohn said:
Do you have the backup of previous rom?
If you are going to flash stock rom, gydp tool will detect the phone even without battery too.
Click to expand...
Click to collapse
Let me check that when I get back home and let you know, I must have backups If GYDY worked, then we shall party :angel::cyclops::highfive:
Can someone point to a GYDP guide, I found one but the download links don't work :cyclops:
headlessNick said:
Let me check that when I get back home and let you know, I must have backups If GYDY worked, then we shall party :angel::cyclops::highfive:
Click to expand...
Click to collapse
Try YGDP and flash stock and then restore the backup if available.
When you flash the stock rom it will repalce the twrp also. We can easily install twrp through ygdp. Follow the steps.
1. Select your .cpb file and apply
2. YGDP will unzip the cpb file, path may be C:\YLXZGJ\YGDP\DownFiles\8297W (in my system this is the path, please check after unzipping)
3. Check the unzipped folder contents
4. There will be a file named recovery.img
5. Delete the recovery.img file
6. Copy your twrp recovery to the unzipped folder and rename it to recovery.img
7. Click on start button
8. Remove battery from your phone and connect it to the usb
9. It will detect your phone and start flashing
10. Wait for flashing finishes to 100 %
11. Done. Disconnect phone. You flashed stock rom with twrp recovery
12. Copy the backup to memory card and insert it in phone
12. Insert battery and press power button and volume up key, go to twrp recovery, restore your backup and enjoy
---------- Post added at 12:00 PM ---------- Previous post was at 11:56 AM ----------
headlessNick said:
Can someone point to a GYDP guide, I found one but the download links don't work :cyclops:
Click to expand...
Click to collapse
http://www.needrom.com/wp-content/uploads/2014/10/YGDP_Setup_V3.83_Assembly.zip
Try this one, i am using this one on A311.
You need to have these drivers installed in your system - DA USB VCOM Port, PreLoader USB VCOM (Android)
If you have drivers not installed use the below one from the attachment. :victory:
Thanks - Tying...
headlessNick said:
Thanks - Tying...
Click to expand...
Click to collapse
Thanks a lot guys especially
shaijuvjohn said:
shaijuvjohn
Click to expand...
Click to collapse
, I should have probably read all the instructions, It was all there. Had some difficulties in installing the drivers as COM port But at the end :victory: works like charm.
I will definitely spread this knowledge with who ever needs in future.
Proud owner of stocked rooted custom recovery MMX Nitro A310 and OnePlus One
headlessNick said:
Thanks a lot guys especially , I should have probably read all the instructions, It was all there. Had some difficulties in installing the drivers as COM port But at the end :victory: works like charm.
I will definitely spread this knowledge with who ever needs in future.
Proud owner of stocked rooted custom recovery MMX Nitro A310 and OnePlus One
Click to expand...
Click to collapse
Yup because i already went through all these situations and i know the difficulties. That is why i gave you each steps. Always Happy to HELP. :victory:
didnt worked
shaijuvjohn said:
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Click to expand...
Click to collapse
I hv tried to installed from ygdp stock rom but it stopped in between. The process wont complete, plz help me if u can
Micromax q391
My Micromax canvas q391 not working its just stuck on the Micromax logo n I'm not even able to access the recovery mode n does not have the backup of rom
What can I do to start it up please help
Even I tried to Flash with YGDP but no use. My mobile is not stable suddenly and automatically it disconnects from my system even connected with USB Cable.
..
WHen I open the link a page comes up saying " Needrom do not authorizing, the links referred by another website for download the ROMs.
The link must obligatory be clicked from of Needrom.com
"
What should I do....
same problrm faced
headlessNick said:
I have TWRP in my A310. Flashed http://forum.xda-developers.com/a310/development/resurrection-remix-lp-5-5-t3160496 this rom, dunno which version TWRP I have, so now phone is not starting up.
Any help will be appreciated, Guys I don't want to take my phone to Service center ppl. They are horrible.
Phone is turning on, trying to boot - failing - restarting - trying to enter recovery as a TWRP logo shows up then screen flickers and nothing happens and this keeps going on. TWRP also tries to open MTP but that fails too.
Dosen't stay in Bootloader - fastboot as well, restarts.
Click to expand...
Click to collapse
i had faced same problem ..
but stay calm .. just download ypdp flash tool .. download stock rom and flash it using ypdp tool ... remember while flashing remove the battery otherwise it will not detect the phone , as my was not detected .. but as soon i removed the battery , it flashed the rom in couple of minutes . and after flashing remember to flash a custom rom as the stock rom gets corrupted causing these issues .. installed darkeness redefined rom and it is woking extremely fast , best rom in my opinion . choise is upon you ,
Hope my message helped you , for any more questions do ask.
boot loop
i have the same problem boot loop but im not able to flash becoz my micromax canvas nitro a311 disconnecting continuously on lap im not able to open recovery mode also help:fingers-crossed:
Hi…
Every time I reboot my phone, it shows errors like ‘bluetooth has stopped’
'voice command has stopped'
‘com.android.phone has stopped’ etc etc..
I can’t even unlock my lock screeen because of these errors..
I tried recovery options, cleared cache and data and factory reset option..
but still nothing happened
Do i have to flash custom rom to use my phone again?
I don't care about the data/apps or any rom..
I just need my phone working by any means..
My micromax a114 was rooted..
please provide me steps to deal with this situation keeping in mind that I can only use my phone in recovery option
can’t open playstore to download mobile uncle tool or anything
please help
Yes flash it again or flash your original rom then re download the custom rom and then flash it again
---------- Post added at 09:33 AM ---------- Previous post was at 09:29 AM ----------
Download original rom on sd card from pc then put sd card in mobile then flash that rom (clear cash,etc etc)...then start your mobile errors should stop now then re-download your custom rom and flash it....if still it shows errors then don't use that rom